Search Results

Search found 3691 results on 148 pages for 'perfect forwarding'.

Page 145/148 | < Previous Page | 141 142 143 144 145 146 147 148  | Next Page >

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Core Data error when assigning variable with one-to-one relationship

  - by Hoang Pham

  I tried to assign a managed object (C) with its property another managed object (B) (a one-to-one relationship) in which this other managed object (B) has a to-many relationship with one other managed object (A). There is an error from this assignment in which I copied as follows: #0 0x020e53a7 in ___forwarding___ #1 0x020c16c2 in __forwarding_prep_0___ #2 0x02078988 in CFRetain #3 0x0207a728 in CFSetAddValue #4 0x020c2fb2 in CFSetCreate #5 0x01e51ce8 in -[_NSFaultingMutableSet copyWithZone:] #6 0x020afcca in -[NSObject copy] #7 0x01e50d22 in -[NSManagedObject(_NSInternalMethods) _newPropertiesForRetainedTypes:andCopiedTypes:preserveFaults:] #8 0x01e51aa0 in -[NSManagedObject(_NSInternalMethods) _newAllPropertiesWithRelationshipFaultsIntact__] #9 0x01e519b4 in -[NSManagedObjectContext(_NSInternalChangeProcessing) _establishEventSnapshotsForObject:] #10 0x01e51866 in _PFFastMOCObjectWillChange #11 0x01e516c5 in _PF_ManagedObject_WillChangeValueForKeyIndex #12 0x01e51525 in _sharedIMPL_setvfk_core #13 0x01e51483 in _PF_Handler_Public_SetProperty #14 0x01e546d1 in -[NSManagedObject(_NSInternalMethods) _didChangeValue:forRelationship:named:withInverse:] #15 0x0030ec1e in NSKVONotify #16 0x002aae2a in -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] #17 0x01e5212f in _PF_ManagedObject_DidChangeValueForKeyIndex #18 0x01e515b1 in _sharedIMPL_setvfk_core #19 0x01e55827 in _svfk_5 I don't understand very well what the exact description of this error is. Can someone explain to me what it is and how to solve this one. Note that all other assignments in which the managed object B does not have any A items do not raise this error. ObjectC *objectC = [NSEntityDescription insertNewObjectForEntityForName:@"ObjectC" inManagedObjectContext:managedObjectContext]; objectC.objectB = objectB; Thank you in advance. I added some more NSZombieEnabled/MallocStackLogging generated log: 2010-05-18 17:28:05.327 Foo[2069:207] *** -[CFSet retain]: message sent to deallocated instance 0x800c880 (gdb) shell malloc_history 207 0x800c880 malloc_history cannot examine process 207 because the process does not exist. (gdb) shell malloc_history 2069 0x800c880 ALLOC 0x800c880-0x800c884 [size=5]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlIOParseDTD | _endElementNs | -[Parser parser:didEndElement:namespaceURI:qualifiedName:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asl_set_query | strdup | malloc | malloc_zone_malloc ---- FREE 0x800c880-0x800c884 [size=5]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlIOParseDTD | _endElementNs | -[Parser parser:didEndElement:namespaceURI:qualifiedName:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asl_free | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asl_set_query | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asl_set_query | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | free ALLOC 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | asprintf | malloc | malloc_zone_malloc ---- FREE 0x800c860-0x800c8df [size=128]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlParseCharData | _characters | -[Parser parser:foundCharacters:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | asl_send | _asl_send_level_message | free ALLOC 0x800c700-0x800c893 [size=404]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlIOParseDTD | _startElementNs | -[Parser parser:didStartElement:namespaceURI:qualifiedName:attributes:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | CFCalendarDecomposeAbsoluteTime | _CFCalendarDecomposeAbsoluteTimeV | __CFCalendarSetupCal | __CFCalendarCreateUCalendar | ucal_open | icu::Calendar::createInstance(icu::TimeZone*, icu::Locale const&, UErrorCode&) | malloc | malloc_zone_malloc ---- FREE 0x800c700-0x800c893 [size=404]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlIOParseDTD | _startElementNs | -[Parser parser:didStartElement:namespaceURI:qualifiedName:attributes:] | NSLog | NSLogv | _CFLogvEx | __CFLogCString | _CFRelease | free ALLOC 0x800c880-0x800c8c7 [size=72]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __NSFireDelayedPerform | -[Step2ViewController downloadData] | -[Parser downloadVariantsWithPin:forTerminal:] | -[Parser parseByNSXMLParser:] | -[NSXMLParser parse] | xmlParseChunk | xmlIOParseDTD | _startElementNs | -[Parser parser:didStartElement:namespaceURI:qualifiedName:attributes:] | +[NSEntityDescription insertNewObjectForEntityForName:inManagedObjectContext:] | +[NSManagedObject(_PFDynamicAccessorsAndPropertySupport) allocWithEntity:] | _PFAllocateObject | malloc_zone_calloc ---- FREE 0x800c880-0x800c8c7 [size=72]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __CFRunLoopDoObservers | _performRunLoopAction | -[_PFManagedObjectReferenceQueue _processReferenceQueue:] | _PFDeallocateObject | malloc_zone_free ALLOC 0x800c880-0x800c8a7 [size=40]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __CFRunLoopDoObservers | CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) | CA::Transaction::commit() | CA::Context::commit_transaction(CA::Transaction*) | CALayerDisplayIfNeeded | -[TileLayer display] | -[CALayer _display] | CABackingStoreUpdate | backing_callback(CGContext*, void*) | WebCore::TiledSurface::drawLayer(CALayer*, CGContext*) | WKWindowDrawRect | WKViewDisplayRect | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | -[WebHTMLView drawSingleRect:] | -[WebFrame(WebInternal) _drawRect:contentsOnly:] | WebCore::FrameView::paintContents(WebCore::GraphicsContext*, WebCore::IntRect const&) | WebCore::RenderLayer::paint(WebCore::GraphicsContext*, WebCore::IntRect const&, WebCore::PaintRestriction, WebCore::RenderObject*) | WebCore::RenderLayer::paintLayer(WebCore::RenderLayer*, WebCore::GraphicsContext*, WebCore::IntRect const&, bool, WebCore::PaintRestriction, WebCore::RenderObject*, bool, bool) | WebCore::RenderLayer::paintLayer(WebCore::RenderLayer*, WebCore::GraphicsContext*, WebCore::IntRect const&, bool, WebCore::PaintRestriction, WebCore::RenderObject*, bool, bool) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderFlow::paintLines(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RootInlineBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::InlineFlowBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::InlineTextBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::paintTextWithShadows(WebCore::GraphicsContext*, WebCore::Font const&, WebCore::TextRun const&, int, int, WebCore::IntPoint const&, int, int, int, int, WebCore::ShadowData*, bool) | WebCore::GraphicsContext::drawText(WebCore::Font const&, WebCore::TextRun const&, WebCore::IntPoint const&, int, int) | WebCore::Font::drawSimpleText(WebCore::GraphicsContext*, WebCore::TextRun const&, WebCore::FloatPoint const&, int, int) const | WebCore::Font::drawGlyphBuffer(WebCore::GraphicsContext*, WebCore::GlyphBuffer const&, WebCore::TextRun const&, WebCore::FloatPoint&) const | WebCore::Font::drawGlyphs(WebCore::GraphicsContext*, WebCore::SimpleFontData const*, WebCore::GlyphBuffer const&, int, int, WebCore::FloatPoint const&, bool) const | CGGStateSetFont | maybeCopyTextState | calloc | malloc_zone_calloc ---- FREE 0x800c880-0x800c8a7 [size=40]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __CFRunLoopDoObservers | CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) | CA::Transaction::commit() | CA::Context::commit_transaction(CA::Transaction*) | CALayerDisplayIfNeeded | -[TileLayer display] | -[CALayer _display] | CABackingStoreUpdate | backing_callback(CGContext*, void*) | WebCore::TiledSurface::drawLayer(CALayer*, CGContext*) | WKWindowDrawRect | WKViewDisplayRect | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | _WKViewDraw(CGContext*, WKView*, CGRect) | -[WebHTMLView drawSingleRect:] | -[WebFrame(WebInternal) _drawRect:contentsOnly:] | WebCore::FrameView::paintContents(WebCore::GraphicsContext*, WebCore::IntRect const&) | WebCore::RenderLayer::paint(WebCore::GraphicsContext*, WebCore::IntRect const&, WebCore::PaintRestriction, WebCore::RenderObject*) | WebCore::RenderLayer::paintLayer(WebCore::RenderLayer*, WebCore::GraphicsContext*, WebCore::IntRect const&, bool, WebCore::PaintRestriction, WebCore::RenderObject*, bool, bool) | WebCore::RenderLayer::paintLayer(WebCore::RenderLayer*, WebCore::GraphicsContext*, WebCore::IntRect const&, bool, WebCore::PaintRestriction, WebCore::RenderObject*, bool, bool) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintChildren(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderBlock::paintObject(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RenderFlow::paintLines(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::RootInlineBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::InlineFlowBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::InlineTextBox::paint(WebCore::RenderObject::PaintInfo&, int, int) | WebCore::paintTextWithShadows(WebCore::GraphicsContext*, WebCore::Font const&, WebCore::TextRun const&, int, int, WebCore::IntPoint const&, int, int, int, int, WebCore::ShadowData*, bool) | WebCore::GraphicsContext::restorePlatformState() | CGContextRestoreGState | CGGStackRestore | CGGStateRelease | textStateRelease | free ALLOC 0x800c880-0x800c8bf [size=64]: thread_a0a8c4e0 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | CA::timer_callback(__CFRunLoopTimer*, void*) | run_animation_callbacks(double, void*) | -[UIViewAnimationState animationDidStop:finished:] | -[UIViewAnimationState sendDelegateAnimationDidStop:finished:] | -[UINavigationTransitionView _navigationTransitionDidStop] | -[UIView(Hierarchy) removeFromSuperview] | -[UITextField resignFirstResponder] | -[UIFieldEditor resignFirstResponder] | -[UIKeyboardImpl setDelegate:] | -[UIKeyboardImpl setDelegate:force:] | -[UITextInteractionAssistant setGestureRecognizers] | -[UITextInteractionAssistant addTwoFingerRangedSelectRecognizer] | -[UILongPressGestureRecognizer initWithTarget:action:] | -[__NSPlaceholderSet init] | -[__NSPlaceholderSet initWithCapacity:] | __CFSetInit | _CFRuntimeCreateInstance | malloc_zone_malloc

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Popping UIView crashes app

  - by Adun

  I'm basically pushing a UIView from a UITableViewController and all it contains is a UIWebView. However when I remove the UIView to return back to the UITableView the app crashes. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here. Create and push another view controller. if (indexPath.row == websiteCell) { NSString *urlPath = [NSString stringWithFormat:@"http://%@", exhibitor.website]; WebViewController *webViewController = [[WebViewController alloc] initWithURLString:urlPath]; // Pass the selected object to the new view controller. [self.parentViewController presentModalViewController:webViewController animated:YES]; [webViewController release]; } } If I comment out the [webViewController release] the app doesn't crash, but I know that this would be a leak. Below is the code for the Web Browser: #import "WebViewController.h" @implementation WebViewController @synthesize webBrowserView; @synthesize urlValue; @synthesize toolBar; @synthesize spinner; @synthesize loadUrl; -(id)initWithURLString:(NSString *)urlString { if (self = [super init]) { urlValue = urlString; } return self; } #pragma mark WebView Controls - (void)goBack { [webBrowserView goBack]; } - (void)goForward { [webBrowserView goForward]; } - (void)reload { [webBrowserView reload]; } - (void)closeBrowser { [self.parentViewController dismissModalViewControllerAnimated:YES]; } #pragma end // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; CGRect contentRect = self.view.bounds; //NSLog(@"%f", contentRect.size.height); float webViewHeight = contentRect.size.height - 44.0f; // navBar = 44 float toolBarHeight = contentRect.size.height - webViewHeight; // navigation bar UINavigationBar *navBar = [[[UINavigationBar alloc] initWithFrame:CGRectMake(0, 20, contentRect.size.width, 44)] autorelease]; navBar.delegate = self; UIBarButtonItem *doneButton = [[[UIBarButtonItem alloc] initWithTitle:@"Done" style:UIBarButtonItemStyleDone target:nil action:@selector(closeBrowser)] autorelease]; UINavigationItem *item = [[[UINavigationItem alloc] initWithTitle:@"CEDIA10"] autorelease]; item.leftBarButtonItem = doneButton; [navBar pushNavigationItem:item animated:NO]; [self.view addSubview:navBar]; // web browser webBrowserView = [[UIWebView alloc] initWithFrame:CGRectMake(0, 64, contentRect.size.width, webViewHeight)]; webBrowserView.delegate = self; webBrowserView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight; webBrowserView.scalesPageToFit = YES; [self.view addSubview:webBrowserView]; // buttons UIBarButtonItem *backButton = [[[UIBarButtonItem alloc] initWithImage:[UIImage imageNamed:@"arrowleft.png"] style:UIBarButtonItemStylePlain target:self action:@selector(goBack)] autorelease]; UIBarButtonItem *fwdButton = [[[UIBarButtonItem alloc] initWithImage:[UIImage imageNamed:@"arrowright.png"] style:UIBarButtonItemStylePlain target:self action:@selector(goForward)] autorelease]; UIBarButtonItem *refreshButton = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemRefresh target:self action:@selector(reload)] autorelease]; UIBarButtonItem *flexSpace = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFlexibleSpace target:nil action:nil] autorelease]; UIBarButtonItem *fixSpace = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFixedSpace target:nil action:nil] autorelease]; [fixSpace setWidth: 40.0f]; spinner = [[[UIActivityIndicatorView alloc] initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleWhite] autorelease]; [spinner startAnimating]; UIBarButtonItem *loadingIcon = [[[UIBarButtonItem alloc] initWithCustomView:spinner] autorelease]; NSArray *toolBarButtons = [[NSArray alloc] initWithObjects: fixSpace, backButton, fixSpace, fwdButton, flexSpace, loadingIcon, flexSpace, refreshButton, nil]; // toolbar toolBar = [[UIToolbar alloc] initWithFrame:CGRectMake(0, webViewHeight, contentRect.size.width, toolBarHeight)]; toolBar.autoresizingMask = UIViewAutoresizingFlexibleTopMargin | UIViewAutoresizingFlexibleWidth; toolBar.items = toolBarButtons; [self.view addSubview:toolBar]; // load the request NSURL *requestString = [NSURL URLWithString:urlValue]; [webBrowserView loadRequest:[NSURLRequest requestWithURL: requestString]]; [toolBarButtons release]; } - (void)viewWillDisappear { if ([webBrowserView isLoading]) { [webBrowserView stopLoading]; webBrowserView.delegate = nil; } } #pragma mark UIWebView - (void)webViewDidStartLoad:(UIWebView*)webView { [spinner startAnimating]; } - (void)webViewDidFinishLoad:(UIWebView*)webView { [spinner stopAnimating]; } - (BOOL)webView:(UIWebView *)webView shouldStartLoadWithRequest:(NSURLRequest *)request navigationType:(UIWebViewNavigationType)navigationType { loadUrl = [[request URL] retain]; if ([[loadUrl scheme] isEqualToString: @"mailto"]) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"CEDIA10" message:@"Do you want to open Mail and exit AREC10?" delegate:self cancelButtonTitle:@"No" otherButtonTitles:@"Yes",nil]; [alert show]; [alert release]; return NO; } [loadUrl release]; return YES; } - (void)webView:(UIWebView *)webView didFailLoadWithError:(NSError *)error { [spinner stopAnimating]; if (error.code == -1009) { // no internet connection UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"CEDIA10" message:@"You need an active Internet connection." delegate:self cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert show]; [alert release]; } } #pragma mark UIAlertView - (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex { if (buttonIndex == 1) { [[UIApplication sharedApplication] openURL:loadUrl]; [loadUrl release]; } } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. [webBrowserView release]; [urlValue release]; [toolBar release]; [spinner release]; [loadUrl release]; webBrowserView = nil; webBrowserView.delegate = nil; urlValue = nil; toolBar = nil; spinner = nil; loadUrl = nil; } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [webBrowserView release]; [urlValue release]; [toolBar release]; [spinner release]; [loadUrl release]; webBrowserView.delegate = nil; urlValue = nil; toolBar = nil; spinner = nil; loadUrl = nil; [super dealloc]; } @end Below this is the crash log that I am getting: Date/Time: 2010-05-13 11:58:20.023 +1000 OS Version: iPhone OS 3.1.3 (7E18) Report Version: 104 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x00000000, 0x00000000 Crashed Thread: 0 Thread 0 Crashed: 0 libSystem.B.dylib 0x00090b2c __kill + 8 1 libSystem.B.dylib 0x00090b1a kill + 4 2 libSystem.B.dylib 0x00090b0e raise + 10 3 libSystem.B.dylib 0x000a7e34 abort + 36 4 libstdc++.6.dylib 0x00066390 __gnu_cxx::__verbose_terminate_handler() + 588 5 libobjc.A.dylib 0x00008898 _objc_terminate + 160 6 libstdc++.6.dylib 0x00063a84 __cxxabiv1::__terminate(void (*)()) + 76 7 libstdc++.6.dylib 0x00063afc std::terminate() + 16 8 libstdc++.6.dylib 0x00063c24 __cxa_throw + 100 9 libobjc.A.dylib 0x00006e54 objc_exception_throw + 104 10 CoreFoundation 0x00095bf6 -[NSObject doesNotRecognizeSelector:] + 106 11 CoreFoundation 0x0001ab12 ___forwarding___ + 474 12 CoreFoundation 0x00011838 _CF_forwarding_prep_0 + 40 13 QuartzCore 0x0000f448 CALayerCopyRenderLayer + 24 14 QuartzCore 0x0000f048 CA::Context::commit_layer(_CALayer*, unsigned int, unsigned int, void*) + 100 15 QuartzCore 0x0000ef34 CALayerCommitIfNeeded + 336 16 QuartzCore 0x0000eedc CALayerCommitIfNeeded + 248 17 QuartzCore 0x00011ee8 CA::Context::commit_root(void*, void*) + 52 18 QuartzCore 0x00011e80 x_hash_table_foreach + 64 19 QuartzCore 0x00011e2c CA::Transaction::foreach_root(void (*)(void*, void*), void*) + 40 20 QuartzCore 0x0000bb68 CA::Context::commit_transaction(CA::Transaction*) + 1068 21 QuartzCore 0x0000b46c CA::Transaction::commit() + 276 22 QuartzCore 0x000135d4 CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) + 84 23 CoreFoundation 0x0000f82a __CFRunLoopDoObservers + 466 24 CoreFoundation 0x00057340 CFRunLoopRunSpecific + 1812 25 CoreFoundation 0x00056c18 CFRunLoopRunInMode + 44 26 GraphicsServices 0x000041c0 GSEventRunModal + 188 27 UIKit 0x00003c28 -[UIApplication _run] + 552 28 UIKit 0x00002228 UIApplicationMain + 960 29 CEDIA10 0x00002e16 main (main.m:14) 30 CEDIA10 0x00002db8 start + 32 Any ideas on why the app is crashing?

  Read the article

• Authlogic Facebook Connect and cucumber

  - by jspooner

  I added the authlogic_facebook_connect plugin to my project and I'm now having problem running my cucumber test because of a NoMethodError. undefined method `set_facebook_session' for nil:NilClass (NoMethodError) In authlogic_facebook_connect/Session.rb the method "authenticating_with_facebook_connect?" is called as some sort of callback and the controller is defined but is missing the 'set_facebook_session' method. def authenticating_with_facebook_connect? controller.set_facebook_session attempted_record.nil? && errors.empty? && controller.facebook_session end I don't understand why the cucumber test is not loading the controller with this method. I also test the app in development and cucumber environments and everything works perfect. Here is the full cucumber output. Feature: Authentication In order to keep security a user should only be able to edit their own profile Background: # features/authorization.feature:4 Given a valid user record for joe_runner # features/step_definitions/user_steps.rb:4 undefined method `set_facebook_session' for nil:NilClass (NoMethodError) ./vendor/plugins/authlogic/lib/authlogic/controller_adapters/abstract_adapter.rb:63:in `send' ./vendor/plugins/authlogic/lib/authlogic/controller_adapters/abstract_adapter.rb:63:in `method_missing' ./vendor/plugins/authlogic_facebook_connect/lib/authlogic_facebook_connect/session.rb:132:in `authenticating_with_facebook_connect?' ./vendor/plugins/authlogic/lib/authlogic/session/callbacks.rb:83:in `validate' ./vendor/plugins/authlogic/lib/authlogic/session/validation.rb:64:in `valid?' ./vendor/plugins/authlogic/lib/authlogic/session/existence.rb:65:in `save' ./vendor/plugins/authlogic/lib/authlogic/session/existence.rb:30:in `create' ./vendor/plugins/authlogic/lib/authlogic/acts_as_authentic/session_maintenance.rb:113:in `create_session' ./vendor/plugins/authlogic/lib/authlogic/acts_as_authentic/session_maintenance.rb:103:in `maintain_sessions' ./features/step_definitions/user_steps.rb:5:in `/^a valid user record for ([\w]*)$/' features/authorization.feature:5:in `Given a valid user record for joe_runner' Scenario: Jonathan can edit his profile but not other users profiles # features/authorization.feature:7 Given jonathan is logged in as an user # features/step_definitions/user_steps.rb:13 When I go to my user edit page # features/step_definitions/web_steps.rb:18 And I press "Update" # features/step_definitions/web_steps.rb:22 Then I should see "Account updated!" # features/step_definitions/web_steps.rb:142 When I go to joe_runner's user edit page # features/step_definitions/web_steps.rb:18 Then I should see "You do not allowed to access to view that page" # features/step_definitions/web_steps.rb:142 Failing Scenarios: cucumber features/authentication.feature:9 # Scenario: Signup cucumber features/authorization.feature:7 # Scenario: Jonathan can edit his profile but not other users profiles 2 scenarios (2 failed) 15 steps (2 failed, 13 skipped) 0m0.173s rake aborted! Command failed with status (1): [/System/Library/Frameworks/Ruby.framework/...] /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:995:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1029:in `ruby' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `ruby' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.4/lib/cucumber/rake/task.rb:68:in `run' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.4/lib/cucumber/rake/task.rb:138:in `define_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:607:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:596:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:in `invoke' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in `invoke_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31 /usr/bin/rake:19:in `load' /usr/bin/rake:19 activespoon:base_project jspooner$ There are a couple of blogs that give examples on how to test facebook apps with cucumber but they didn't help because my error comes before these. http://opensoul.org/2009/3/6/testing-facebook-with-cucumber http://ryanbigg.com/2010/03/testing-facebook/

  Read the article

• MSDN "pseudoframe"

  - by bobobobo

  So, I'm trying to replicate MSDN "pseudoframes" here. Their pages are laid out like they're using an old-school frameset, but inspecting their elements with firebug reveals they've done this with purely div's. Here's my attempt at it. Its not perfect though, it only works in Chrome and Firefox, it has this weird highlight select behavior that I don't like, any takers? <!doctype html> <html> <head> <title>msdn "pseudoframe"</title> <style> body { background-color: #aaa; margin: 0; padding: 0; } div#pseudoframe, div#main { border: solid 1px black; background-color: #fff; } div#pseudoframe { position: absolute; left: 0; width: 180px; height: 100%; overflow-x: auto; overflow-y: none; } div#sizeMod { background-color: #a0a; position: absolute; left: 220px; height: 100%; cursor: e-resize; } div#main { font-weight: bold; font-size: 2em; padding: 24px; margin-left: 224px; } </style> <script type="text/javascript"> function initialize() { // get the pseudoframe and attach an event to the mouse flyover. var pf = document.getElementById('pseudoframe'); var main = document.getElementById('main'); var resize = document.getElementById( 'sizeMod' ); pf['onmouseover'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; // are we within 5 px of the border? if we are, // change the mouse cursor to resize. }; pf['onscroll'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; var sizeMod = document.getElementById( 'sizeMod' ); //alert( el.scrollLeft ); sizeMod.style.right = '-' + (el.scrollLeft) + 'px'; //alert( sizeMod.style.right ); // are we within 5 px of the border? if we are, // change the mouse cursor to resize. }; resize['onmousedown'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; window.lockResize = true; }; window['onmouseup'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; window.lockResize = false; //release on any mouse up event //alert('unlocked'); }; window['onmousemove'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; if( window.lockResize == true ) { // resize. get client x and y. var x = event.clientX; var y = event.clientY; pf.style.width = x + 'px'; resize.style.left = x + 'px'; main.style.marginLeft = x + 'px'; //alert( pf.style.width ); event.stopPropagation(); event.preventDefault(); return false; } }; } </script> </head> <body onload=" initialize(); "> <div id="pseudoframe"> <ul> <li>Code</li> <li>MICROSOFT CODE <ul> <li>WINDOWS XP SOURCE</li> <li>WINDOWS VISTA SOURCE</li> <li>WINDOWS 7 SOURCE</li> <li>WINDOWS 8 SOURCE</li> </ul> </li> <li>DOWNLOAD ALL MICROSOFT CODE EVER WRITTEN</li> <li>DOWNLOAD ALL MAC OS CODE EVER WRITTEN</li> <li>DOWNLOAD ALL AMIGA GAME CONSOLE CODE</li> <li>DOWNLOAD ALL CODE EVER WRITTEN PERIOD</li> </ul> </div> <div id="sizeMod">&nbsp;&nbsp;</div> <div id="main"> lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe </div> </body> </html>

  Read the article

• Why Java servlet can't get Paypal IPN messages everytime ?

  - by Frank

  I have a Java servlet running on my notebook with Windows Vista, I set up a static IP, did port forwarding and registered for a free DDNS service, now my servlet is running, I gave the url to Paypal to send me IPN messages, I went on to it's sandbox site got to the test tools page, tried to send test messages by clicking the "Send IPN" button, most of the time it would fail, the error is : "IPN delivery failed. Unable to connect to the specified URL. Please verify the URL and try again." But maybe 1 in 10 times, it might be successful and my servlet would get the message, and I looked at the messages I got, they are in correct format. So I called Paypal asking why, he said I shouldn't run the servlet on my notebook, in stead I should run it on the web server, but I told him my ISP doesn't support Java on their server, and since I did all the above steps, shouldn't it be the same to run the servlet on my notebook ? He said his test showed he couldn't get to my servlet, but I asked why maybe 1 in 10 times it could get through ? If there is something wrong with running it on my notebook, then 100% times it should fail, am I correct on this point ? But anyway he said that's all he could do, and I should troubleshoot it myself. The servlet looks like this : import java.io.*; import java.net.*; import javax.servlet.*; import javax.servlet.http.*; import java.util.*; public class PayPal_Servlet extends HttpServlet { static boolean Debug=true; static String PayPal_Url="https://www.paypal.com/cgi-bin/webscr",Sandbox_Url="https://www.sandbox.paypal.com/cgi-bin/webscr", Dir_License_Messages="C:/Dir_License_Messages/"; static TransparencyExample Transparency_Example; static PayPal_Message_To_License_File_Worker PayPal_message_to_license_file_worker; // Initializes the servlet. public void init(ServletConfig config) throws ServletException { super.init(config); if (!new File(Dir_License_Messages).exists()) new File(Dir_License_Messages).mkdirs(); System.gc(); } /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods. * @param request servlet request * @param response servlet response */ protected void processRequest(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { // Read post from PayPal system and add 'cmd' Enumeration en=request.getParameterNames(); String str="cmd=_notify-validate"; while (en.hasMoreElements()) { String paramName=(String)en.nextElement(); String paramValue=request.getParameter(paramName); str=str+"&"+paramName+"="+URLEncoder.encode(paramValue); } // Post back to PayPal system to validate // NOTE: change http: to https: in the following URL to verify using SSL (for increased security). // using HTTPS requires either Java 1.4 or greater, or Java Secure Socket Extension (JSSE) and configured for older versions. URL u=new URL(Debug?Sandbox_Url:PayPal_Url); URLConnection uc=u.openConnection(); uc.setDoOutput(true); uc.setRequestProperty("Content-Type","application/x-www-form-urlencoded"); PrintWriter pw=new PrintWriter(uc.getOutputStream()); pw.println(str); pw.close(); BufferedReader in=new BufferedReader(new InputStreamReader(uc.getInputStream())); String res=in.readLine(); in.close(); // Assign posted variables to local variables String itemName=request.getParameter("item_name"); String itemNumber=request.getParameter("item_number"); String paymentStatus=request.getParameter("payment_status"); String paymentAmount=request.getParameter("mc_gross"); String paymentCurrency=request.getParameter("mc_currency"); String txnId=request.getParameter("txn_id"); String receiverEmail=request.getParameter("receiver_email"); String payerEmail=request.getParameter("payer_email"); if (res.equals("VERIFIED")) // Check notification validation { // check that paymentStatus=Completed // check that txnId has not been previously processed // check that receiverEmail is your Primary PayPal email // check that paymentAmount/paymentCurrency are correct // process payment } else if (res.equals("INVALID")) // Log for investigation { } else // Log for error { } // =========================================================================== if (txnId!=null) { Write_File_Safe_Fast(Dir_License_Messages+txnId+".txt",new StringBuffer(str.replace("&","\n")),false); } // =========================================================================== String Message_File_List[]=Tool_Lib.Get_File_List_From_Dir(Dir_License_Messages); response.setContentType("text/html"); PrintWriter out=response.getWriter(); String title="Reading All Request Parameters",Name="",Value; out.println("<Html><Head><Title>"+title+"</Title></Head>\n<Body Bgcolor=\"#FDF5E6\">\n<H1 Align=Center>"+title+"</H1>\n"+ "<Table Border=1 Align=Center>\n"+"<Tr Bgcolor=\"#FFAD00\"><Th>Parameter Name</Th><Th>Parameter Value(s) Messages = "+Message_File_List.length+"</Th></Tr>"); Enumeration paramNames=request.getParameterNames(); while(paramNames.hasMoreElements()) { String paramName=(String)paramNames.nextElement(); out.print("<Tr><Td>"+paramName+"</Td><Td>"); String[] paramValues=request.getParameterValues(paramName); if (paramValues.length == 1) { String paramValue=paramValues[0]; if (paramValue.length() == 0) out.print("<I>No Value</I>"); else { out.println(paramValue+"</Td></Tr>"); // Out("paramName = "+paramName+" paramValue = "+paramValue); // if (paramName.startsWith("Name")) Name=paramValue; // else if (paramName.startsWith("Value")) Write_File_Safe_Fast("C:/Dir_Data/"+Name,new StringBuffer(paramValue),false); } } else { out.println("<Ul>"); for (int i=0;i<paramValues.length;i++) out.println("<Li>"+paramValues[i]); out.println("</Ul></Td</Tr>"); } } out.println("</Table>\n</Body></Html>"); } /** Handles the HTTP <code>GET</code> method. * @param request servlet request * @param response servlet response */ protected void doGet(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } /** Handles the HTTP <code>POST</code> method. * @param request servlet request * @param response servlet response */ protected void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } // Returns a short description of the servlet. public String getServletInfo() { return "Short description"; } // Destroys the servlet. public void destroy() { System.gc(); } public static void Write_File_Safe_Fast(String File_Path,StringBuffer Str_Buf,boolean Append) { FileOutputStream fos=null; BufferedOutputStream bos=null; try { fos=new FileOutputStream(File_Path,Append); bos=new BufferedOutputStream(fos); for (int j=0;j<Str_Buf.length();j++) bos.write(Str_Buf.charAt(j)); } catch (Exception e) { e.printStackTrace(); } finally { try { if (bos!=null) { bos.close(); bos=null; } if (fos!=null) { fos.close(); fos=null; } } catch (Exception ex) { ex.printStackTrace(); } } System.gc(); } } I use Netbean6.7 to develop the servlet, and the code was from Paypal's JSP sample code, what can I do to debug the problem ?

  Read the article

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• How to use EJB 3.1 DI in Servlet ? (Could not inject session bean by @EJB from web application)

  - by kislo_metal

  I am tying to merging web application(gwt, jpa) to an separate 2 application(business login in ejb/jpa and web client in gwt). Currently i can`t inject my beans from web application (simple servlet) I am using glassfish v3. module limbo(ejb jar) is in dependency of module lust (war). If I use lust with compiler output of limbo everything work perfect (if ejb in web application and the are deploying together as one application). Have I messed some container configuration ? Here is my steps: I have some limbo.jar (ejb-jar) deployed to ejb container. I do not use any ejb-jar.xml, only annotations. package ua.co.inferno.limbo.persistence.beans; import javax.ejb.Remote; @Remote public interface IPersistentServiceRemote { ArrayList<String> getTerminalACPList(); ArrayList<String> getBoxACPList(); ArrayList<String> getCNPList(); ArrayList<String> getCNSList(); String getProductNamebyID(int boxid); ArrayList<String> getRegionsList(String lang); long getSequence(); void persistEntity (Object ent); } package ua.co.inferno.limbo.persistence.beans; import ua.co.inferno.limbo.persistence.entitis.EsetChSchemaEntity; import ua.co.inferno.limbo.persistence.entitis.EsetKeyActionsEntity; @Local public interface IPersistentService { ArrayList<String> getTerminalACPList(); ArrayList<String> getBoxACPList(); ArrayList<String> getCNPList(); ArrayList<String> getCNSList(); String getProductNamebyID(int boxid); ArrayList<String> getRegionsList(String lang); long getSequence(); long persistPurchaseBox(EsetRegPurchaserEntity rp); void removePurchaseTempBox(EsetRegPurchaserTempEntity rpt); EsetRegionsEntity getRegionsById(long rid); void persistEntity (Object ent); } package ua.co.inferno.limbo.persistence.beans; import ua.co.inferno.limbo.persistence.entitis.EsetChSchemaEntity; import ua.co.inferno.limbo.persistence.entitis.EsetKeyActionsEntity; import ua.co.inferno.limbo.persistence.entitis.EsetRegBoxesEntity; import javax.ejb.Stateless; import javax.persistence.EntityManager; import javax.persistence.PersistenceContext; @Stateless(name = "PersistentService") public class PersistentServiceEJB implements IPersistentService, IPersistentServiceRemote{ @PersistenceContext(unitName = "Limbo") EntityManager em; public PersistentServiceEJB() { } ......... } Than i trying to use PersistentService session bean(included in limbo.jar) from web application in lust.war (the limbo.jar & lust.war is not in ear) package ua.co.lust; import ua.co.inferno.limbo.persistence.beans.IPersistentService; import javax.ejb.EJB; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.IOException; @WebServlet(name = "ServletTest", urlPatterns = {"/"}) public class ServletTest extends HttpServlet { protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { service(request, response); } protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { service(request, response); } @EJB private IPersistentService pService; public void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { String hi = pService.getCNPList().toString(); System.out.println("testBean.hello method returned: " + hi); System.out.println("In MyServlet::init()"); System.out.println("all regions" + pService.getRegionsList("ua")); System.out.println("all regions" + pService.getBoxACPList()); } } web.xm <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd" version="3.0"> <servlet> <servlet-name>ServletTest</servlet-name> <servlet-class>ua.co.lust.ServletTest</servlet-class> </servlet> </web-app> When servelt is loading i ge 404 eror (The requested resource () is not available.) And errors in logs : global Log Level SEVERE Logger global Name-Value Pairs {_ThreadName=Thread-1, _ThreadID=31} Record Number 1421 Message ID Complete Message Class [ Lua/co/inferno/limbo/persistence/beans/IPersistentService; ] not found. Error while loading [ class ua.co.lust.ServletTest ] javax.enterprise.system.tools.deployment.org.glassfish.deployment.common Log Level WARNING Logger javax.enterprise.system.tools.deployment.org.glassfish.deployment.common Name-Value Pairs {_ThreadName=Thread-1, _ThreadID=31} Record Number 1422 Message ID Error in annotation processing Complete Message java.lang.NoClassDefFoundError: Lua/co/inferno/limbo/persistence/beans/IPersistentService; ejb jar was deployed with this info log : Log Level INFO Logger javax.enterprise.system.container.ejb.com.sun.ejb.containers Name-Value Pairs {_ThreadName=Thread-1, _ThreadID=26} Record Number 1436 Message ID Glassfish-specific (Non-portable) JNDI names for EJB PersistentService Complete Message [ua.co.inferno.limbo.persistence.beans.IPersistentServiceRemote#ua.co.inferno.limbo.persistence.beans.IPersistentServiceRemote, ua.co.inferno.limbo.persistence.beans.IPersistentServiceRemote] Log Level INFO Logger javax.enterprise.system.tools.admin.org.glassfish.deployment.admin Name-Value Pairs {_ThreadName=Thread-1, _ThreadID=26} Record Number 1445 Message ID Complete Message limbo was successfully deployed in 610 milliseconds. Do i nee to add some additional configuration in a case of injections from others application? Some ideas?

  Read the article

• Factorising program not working. Help required.

  - by Ender

  I am working on a factorisation problem using Fermat's Factorization and for small numbers it is working well. I've been able to calculate the factors (getting the answers from Wolfram Alpha) for small numbers, like the one on the Wikipedia page (5959). Just when I thought I had the problem licked I soon realised that my program was not working when it came to larger numbers. The program follows through the examples from the Wikipedia page, printing out the values a, b, a2 and b2; the results printed for large numbers are not correct. I've followed the pseudocode provided on the Wikipedia page, but am struggling to understand where to go next. Along with the Wikipedia page I have been following this guide. Once again, as my Math knowledge is pretty poor I cannot follow what I need to do next. The code I am using so far is as follows: import java.math.BigInteger; /** * * @author AlexT */ public class Fermat { private BigInteger a, b; private BigInteger b2; private static final BigInteger TWO = BigInteger.valueOf(2); public void fermat(BigInteger N) { // floor(sqrt(N)) BigInteger tmp = getIntSqrt(N); // a <- ceil(sqrt(N)) a = tmp.add(BigInteger.ONE); // b2 <- a*a-N b2 = (a.multiply(a)).subtract(N); final int bitLength = N.bitLength(); BigInteger root = BigInteger.ONE.shiftLeft(bitLength / 2); root = root.add(b2.divide(root)).divide(TWO); // while b2 not square root while(!(isSqrt(b2, root))) { // a <- a + 1 a = a.add(BigInteger.ONE); // b2 <- (a * a) - N b2 = (a.multiply(a)).subtract(N); root = root.add(b2.divide(root)).divide(TWO); } b = getIntSqrt(b2); BigInteger a2 = a.pow(2); // Wrong BigInteger sum = (a.subtract(b)).multiply((a.add(b))); //if(sum.compareTo(N) == 0) { System.out.println("A: " + a + "\nB: " + b); System.out.println("A^2: " + a2 + "\nB^2: " + b2); //} } /** * Is the number provided a perfect Square Root? * @param n * @param root * @return */ private static boolean isSqrt(BigInteger n, BigInteger root) { final BigInteger lowerBound = root.pow(2); final BigInteger upperBound = root.add(BigInteger.ONE).pow(2); return lowerBound.compareTo(n) <= 0 && n.compareTo(upperBound) < 0; } public BigInteger getIntSqrt(BigInteger x) { // It returns s where s^2 < x < (s+1)^2 BigInteger s; // final result BigInteger currentRes = BigInteger.valueOf(0); // init value is 0 BigInteger currentSum = BigInteger.valueOf(0); // init value is 0 BigInteger sum = BigInteger.valueOf(0); String xS = x.toString(); // change input x to a string xS int lengthOfxS = xS.length(); int currentTwoBits; int i=0; // index if(lengthOfxS % 2 != 0) {// if odd length, add a dummy bit xS = "0".concat(xS); // add 0 to the front of string xS lengthOfxS++; } while(i < lengthOfxS){ // go through xS two by two, left to right currentTwoBits = Integer.valueOf(xS.substring(i,i+2)); i += 2; // sum = currentSum*100 + currentTwoBits sum = currentSum.multiply(BigInteger.valueOf(100)); sum = sum.add(BigInteger.valueOf(currentTwoBits)); // subtraction loop do { currentSum = sum; // remember the value before subtract // in next 3 lines, we work out // currentRes = sum - 2*currentRes - 1 sum = sum.subtract(currentRes); // currentRes++ currentRes = currentRes.add(BigInteger.valueOf(1)); sum = sum.subtract(currentRes); } while(sum.compareTo(BigInteger.valueOf(0)) >= 0); // the loop stops when sum < 0 // go one step back currentRes = currentRes.subtract(BigInteger.valueOf(1)); currentRes = currentRes.multiply(BigInteger.valueOf(10)); } s = currentRes.divide(BigInteger.valueOf(10)); // go one step back return s; } /** * @param args the command line arguments */ public static void main(String[] args) { Fermat fermat = new Fermat(); //Works //fermat.fermat(new BigInteger("5959")); // Doesn't Work fermat.fermat(new BigInteger("90283")); } } If anyone can help me out with this problem I'll be eternally grateful.

  Read the article

• Html shows after submitting form and is nowhere to be found in php script.

  - by Kelbizzle

  Upon submitting this form on my site. It send me to a page that says. "Use Back - fill in all fields Use back! ! " But this html isn't in the mail script anywhere. Where could this be coming from? I started out using this contact form (http://www.ibdhost.com/contact/) then changed it a little. Here is the mail script. <?php session_start(); ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Sendemail Script</title> </head> <body> <!-- Reminder: Add the link for the 'next page' (at the bottom) --> <!-- Reminder: Change 'YourEmail' to Your real email --> <?php //the 3 variables below were changed to use the SERVER variable $ip = $_SERVER['REMOTE_ADDR']; $httpref = $_SERVER['HTTP_REFERER']; $httpagent = $_SERVER['HTTP_USER_AGENT']; $visitorf = $_POST['visitorf']; $visitorl = $_POST['visitorl']; $visitormail = $_POST['visitormail']; $visitorphone = $_POST['visitorphone']; //$notes = $_POST['notes']; //$attn = $_POST['attn']; $lookup = array( 'The Election Report' => 'http://www.mydowmain.net/', '5 Resons' => 'http://www.mydomain.net/', 'Report 3' => 'http://someotherurl3.com/', 'Report 4' => 'http://someotherurl4.com/', 'Report 5' => 'http://someotherurl5.com/', // et cetera for your other values ); $attn = trim($_POST['attn']); $url = $lookup[$attn]; //echo 'attn: ' . $attn . ', url:' . $url; die; //additional headers $headers = 'From: US <[email protected]>' . "\r\n"; //$headers .= 'BCC: [email protected]' . "\r\n"; $todayis = date("l, F j, Y, g:i a") ; $subject = "your lead has downloaded a report."; $subjectdp = "Someone has downloaded a report!"; $notes = stripcslashes($notes); $message = "Dear PAl Affiliate,\n\nA prospective lead of yours has downloaded a report from our Website.\nAny contact information they have left and a link to the report they downloaded\ncan be found below. This is the perfect opportunity for you to open up a line of\ncommunication with the prospect and find out their intrests! If you have any questions\nabout this email please feel free to email us at [email protected]\n\n\nFrom: $visitorf $visitorl ($visitormail)\nTelephone Number: $visitorphone \nReport Downloaded:$url\n \n\nBest regards,\nThe Crew"; //$message = "$todayis [EST] \nAttention: \nMessage: $notes \nFrom: $visitorf $visitorl ($visitormail) \nTelephone Number: //$visitorphone \nReport Downloaded:$url\nAdditional Info : IP = $ip \nBrowser Info: $httpagent \nReferral : $httpref\n"; $messagedp = "A Visitor has just downloaded a report. You can find their contact information below.\n \n ***********************************************************************\n From: $visitorf $visitorl\n Email: $visitormail\n Telephone Number: $visitorphone \n Report Downloaded:$url\n \n \n Best regards,\n The Crew\n"; $messagelead = "Dear, $visitorf\n \n \n We appreciate your interest. Below you will find the URL to download the report you requested.\n Things are always changing in costa rica , so check back often. Also, check us out on Facebook & Twitter \n for daily updates. If there is anything we can do at anytime to enhance your experience, please do\n not hesitate to contact us.\n \n To download your report simply click on the link below. (You must have Adobe Reader or an alternative PDF reader installed)\n \n *** Download Link ***\n $url\n"; //check if the function even exists if(function_exists("mail")) { //send the email mail($_SESSION['email'], $subject, $message, $headers) or die("could not send email"); } else { die("mail fucntion not enabled"); } //send the email to us mail('[email protected]', $subjectdp, $messagedp); //send the email to the lead mail($visitormail, 'Thanks for downloading the report!', $messagelead, $headers); header( "Location: http://www.mydomain.com/thanks_report.php" ); ?> </body> </html>

  Read the article

• changing output in objective-c app

  - by Zack

  // // RC4.m // Play5 // // Created by svp on 24.05.10. // Copyright 2010 __MyCompanyName__. All rights reserved. // #import "RC4.h" @implementation RC4 @synthesize txtLyrics; @synthesize sbox; @synthesize mykey; - (IBAction) clicked: (id) sender { NSData *asciidata1 = [@"4875" dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; NSString *asciistr1 = [[NSString alloc] initWithData:asciidata1 encoding:NSASCIIStringEncoding]; //[txtLyrics setText:@"go"]; NSData *asciidata = [@"sdf883jsdf22" dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; NSString *asciistr = [[NSString alloc] initWithData:asciidata encoding:NSASCIIStringEncoding]; //RC4 * x = [RC4 alloc]; [txtLyrics setText:[self decrypt:asciistr1 andKey:asciistr]]; } - (NSMutableArray*) hexToChars: (NSString*) hex { NSMutableArray * arr = [[NSMutableArray alloc] init]; NSRange range; range.length = 2; for (int i = 0; i < [hex length]; i = i + 2) { range.location = 0; NSString * str = [[hex substringWithRange:range] uppercaseString]; unsigned int value; [[NSScanner scannerWithString:str] scanHexInt:&value]; [arr addObject:[[NSNumber alloc] initWithInt:(int)value]]; } return arr; } - (NSString*) charsToStr: (NSMutableArray*) chars { NSString * str = @""; for (int i = 0; i < [chars count]; i++) { str = [NSString stringWithFormat:@"%@%@",[NSString stringWithFormat:@"%c", [chars objectAtIndex:i]],str]; } return str; } //perfect except memory leaks - (NSMutableArray*) strToChars: (NSString*) str { NSData *asciidata = [str dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; NSString *asciistr = [[NSString alloc] initWithData:asciidata encoding:NSASCIIStringEncoding]; NSMutableArray * arr = [[NSMutableArray alloc] init]; for (int i = 0; i < [str length]; i++) { [arr addObject:[[NSNumber alloc] initWithInt:(int)[asciistr characterAtIndex:i]]]; } return arr; } - (void) initialize: (NSMutableArray*) pwd { sbox = [[NSMutableArray alloc] init]; mykey = [[NSMutableArray alloc] init]; int a = 0; int b; int c = [pwd count]; int d = 0; while (d < 256) { [mykey addObject:[pwd objectAtIndex:(d % c)]]; [sbox addObject:[[NSNumber alloc] initWithInt:d]]; d++; } d = 0; while (d < 256) { a = (a + [[sbox objectAtIndex:d] intValue] + [[mykey objectAtIndex:d] intValue]) % 256; b = [[sbox objectAtIndex:d] intValue]; [sbox replaceObjectAtIndex:d withObject:[sbox objectAtIndex:a]]; [sbox replaceObjectAtIndex:a withObject:[[NSNumber alloc] initWithInt:b]]; d++; } } - (NSMutableArray*) calculate: (NSMutableArray*) plaintxt andPsw: (NSMutableArray*) psw { [self initialize:psw]; int a = 0; int b = 0; NSMutableArray * c = [[NSMutableArray alloc] init]; int d; int e; int f; int g = 0; while (g < [plaintxt count]) { a = (a + 1) % 256; b = (b + [[sbox objectAtIndex:a] intValue]) % 256; e = [[sbox objectAtIndex:a] intValue]; [sbox replaceObjectAtIndex:a withObject:[sbox objectAtIndex:b]]; [sbox replaceObjectAtIndex:b withObject:[[NSNumber alloc] initWithInt:e]]; int h = ([[sbox objectAtIndex:a]intValue] + [[sbox objectAtIndex:b]intValue]) % 256; d = [[sbox objectAtIndex:h] intValue]; f = [[plaintxt objectAtIndex:g] intValue] ^ d; [c addObject:[[NSNumber alloc] initWithInt:f]]; g++; } return c; } - (NSString*) decrypt: (NSString*) src andKey: (NSString*) key { NSMutableArray * plaintxt = [self hexToChars:src]; NSMutableArray * psw = [self strToChars:key]; NSMutableArray * chars = [self calculate:plaintxt andPsw:psw]; NSData *asciidata = [[self charsToStr:chars] dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; NSString *asciistr = [[NSString alloc] initWithData:asciidata encoding:NSUTF8StringEncoding]; return asciistr; } @end This is supposed to decrypt a hex string with an ascii string, using rc4 decryption. I'm converting my java application to objective-c. The output keeps changing, every time i run it.

  Read the article

• How can I use the FOR attribute of a LABEL tag without the ID attribute on the INPUT tag

  - by Shawn

  Is there a solution to the problem illustrated in the code below? Start by opening the code in a browser to get straight to the point and not have to look through all that code before knowing what you're looking for. <html> <head> <title>Input ID creates problems</title> <style type="text/css"> #prologue, #summary { margin: 5em; } </style> </head> <body> <h1>Input ID creates a bug</h1> <p id="prologue"> In this example, I make a list of checkboxes representing things which could appear in a book. If you want some in your book, you check them: </p> <form> <ul> <li> <input type="checkbox" id="prologue" /> <label for="prologue">prologue</label> </li> <li> <input type="checkbox" id="chapter" /> <label for="chapter">chapter</label> </li> <li> <input type="checkbox" id="summary" /> <label for="summary">summary</label> </li> <li> <input type="checkbox" id="etc" /> <label for="etc">etc</label> <label> </li> </ul> </form> <p id="summary"> For each checkbox, I want to assign an ID so that clicking a label checks the corresponding checkbox. The problems occur when other elements in the page already use those IDs. In this case, a CSS declaration was made to add margins to the two paragraphs which IDs are "prologue" and "summary", but because of the IDs given to the checkboxes, the checkboxes named "prologue" and "summary" are also affected by this declaration. The following links simply call a javascript function which writes out the element whose id is <a href="javascript:alert(document.getElementById('prologue'));">prologue</a> and <a href="javascript:alert(document.getElementById('summary'));">summary</a>, respectively. In the first case (prologue), the script writes out [object HTMLParagraphElement], because the first element found with id "prologue" is a paragraph. But in the second case (summary), the script writes out [object HTMLInputElement] because the first element found with id "summary" is an input. In the case of another script, the consequences of this mix up could have been much more dramatic. Now try clicking on the label prologue in the list above. It does not check the checkbox as clicking on any other label. This is because it finds the paragraph whose ID is also "prologue" and tries to check that instead. By the way, if there were another checkbox whose id was "prologue", then clicking on the label would check the one which appears first in the code. </p> <p> An easy fix for this would be to chose other IDs for the checkboxes, but this doesn't apply if these IDs are given dynamically, by a php script for example. Another easy fix for this would be to write labels like this: <pre> &lt;label&gt;&lt;input type="checkbox" /&gt;prologue&lt;/label&gt; </pre> and not need to give an ID to the checkboxes. But this only works if the label and checkbox are next to each other. </p> <p> Well, that's the problem. I guess the ideal solution would be to link a label to a checkboxe using another mechanism (not using ID). I think the perfect way to do this would be to match a label to the input element whose NAME (not ID) is the same as the label's FOR attribute. What do you think? </p> </body> </html>

  Read the article

• rsync over ssh is not working anymore, while ssh itself is working fine (Write failed: broken pipe)

  - by brazorf

  This issue started happening after i changed router. This is the scenario: Windows7 Host Ubuntu 10.04 Guest (VirtualBox) Ubuntu 10.04 remote server What i used to do is run a very basic rsync command: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory This worked perfect until i did change adsl provider, and i changed router aswell: now, this happens: rsync on Ubuntu Guest is not working anymore (to any random server), if using this new router rsync on Ubuntu Guest is WORKING, if i switch back to old router i tried a new virtual box ubuntu install, and the command is WORKING with both the routers So, the not-working-combo is oldUbuntu + newRouter. To get things worst, i can state that (on the not-working ubuntu) i ping the remote host plain ssh connection to the remote host is working fine (i can auth, connect, and do stuff on the remote host) scp is NOT working (this is just a further thing i tried) This is the console output of the execution, with ssh verbose set to vvvv: root@client:~# rsync -ae 'ssh -vvvv' /root/test-rsync/ {username}@{hostname}:/home/{username}/test/ OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /root/.ssh/config debug1: Applying options for {hostname} debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to {hostname} [{ip.add.re.ss}] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Not a RSA1 key file /root/.ssh/{private_key}. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/{private_key} type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian-3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug3: Wrote 792 bytes for a total of 831 debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 [email protected] debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 [email protected] debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug3: Wrote 24 bytes for a total of 855 debug2: dh_gen_key: priv key bits set: 125/256 debug2: bits set: 525/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: Wrote 144 bytes for a total of 999 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 4 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 5 debug1: Host '{hostname}' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 512/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/{private_key} (0x7f3ad0e7f9b0) debug3: Wrote 80 bytes for a total of 1143 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /root/.ssh/{private_key} debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1511 debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 1b:65:36:92:59:b3:12:3e:8c:c6:03:28:d4:81:09:dc debug3: sign_and_send_pubkey debug1: read PEM private key done: type RSA debug3: Wrote 656 bytes for a total of 2167 debug1: Enabling compression at level 6. debug1: Authentication succeeded (publickey). debug2: fd 4 setting O_NONBLOCK debug3: fd 5 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug3: Wrote 112 bytes for a total of 2279 debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env SSH_CLIENT debug3: Ignored env SSH_TTY debug1: Sending env LC_ALL = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env LANGUAGE debug3: Ignored env LOGNAME debug3: Ignored env SSH_CONNECTION debug3: Ignored env LESSOPEN debug3: Ignored env LESSCLOSE debug3: Ignored env _ debug1: Sending command: rsync --server -logDtpre.iLsf . /home/{username}/test/ debug2: channel 0: request exec confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug3: Wrote 208 bytes for a total of 2487 At this point everything freeze for lots of minutes, ending in Write failed: Broken pipe rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7] Any suggestion? Thank You F. Edit 2012/09/13: i am changing title and issue definition, since i made some TINY step ahead and i think i can give more detailed clues.

  Read the article

• How do I remove the time from printpreview dialog?

  - by Albo Best

  Here is my code: Imports System.Data.OleDb Imports System.Drawing.Printing Namespace Print Public Class Form1 Inherits System.Windows.Forms.Form Dim PrintC As PrinterClass Dim conn As OleDb.OleDbConnection Dim connectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=..\\db1.mdb" Dim sql As String = String.Empty Dim ds As DataSet Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load FillDataGrid() '//create printerclass object PrintC = New PrinterClass(PrintDocument1, dataGrid) End Sub Private Sub FillDataGrid() Try Dim dt As New DataTable Dim ds As New DataSet ds.Tables.Add(dt) Dim da As New OleDbDataAdapter con.Open() da = New OleDbDataAdapter("SELECT * from klient ", con) da.Fill(dt) con.Close() dataGrid.DataSource = dt.DefaultView Dim dTable As DataTable For Each dTable In ds.Tables Dim dgStyle As DataGridTableStyle = New DataGridTableStyle dgStyle.MappingName = dTable.TableName dataGrid.TableStyles.Add(dgStyle) Next ' DataGrid settings dataGrid.CaptionText = "TE GJITHE KLIENTET" dataGrid.HeaderFont = New Font("Verdana", 12) dataGrid.TableStyles(0).GridColumnStyles(0).Width = 60 dataGrid.TableStyles(0).GridColumnStyles(1).Width = 140 dataGrid.TableStyles(0).GridColumnStyles(2).Width = 140 dataGrid.TableStyles(0).GridColumnStyles(3).Width = 140 dataGrid.TableStyles(0).GridColumnStyles(4).Width = 140 dataGrid.TableStyles(0).GridColumnStyles(5).HeaderText = "" dataGrid.TableStyles(0).GridColumnStyles(5).Width = -1 Catch ex As Exception MessageBox.Show(ex.Message) End Try End Sub Private Sub btnPrint_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPrint.Click 'create printerclass object PrintC = New PrinterClass(PrintDocument1, dataGrid) PrintDocument1.Print() End Sub Private Sub btnPreview_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPreview.Click 'create printerclass object PrintC = New PrinterClass(PrintDocument1, dataGrid) ''preview Dim ps As New PaperSize("A4", 840, 1150) ps.PaperName = PaperKind.A4 PrintDocument1.DefaultPageSettings.PaperSize = ps PrintPreviewDialog1.WindowState = FormWindowState.Normal PrintPreviewDialog1.StartPosition = FormStartPosition.CenterScreen PrintPreviewDialog1.ClientSize = New Size(600, 600) PrintPreviewDialog1.ShowDialog() End Sub Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage 'print grid Dim morepages As Boolean = PrintC.Print(e.Graphics) If (morepages) Then e.HasMorePages = True End If End Sub End Class End Namespace This is how data looks in DataGrid (that's perfect)... and here is how it looks when I click PrintPreview. (I don't want the time to appear there, the "12:00:00" part. in database the date is stored as Short Date (10-Dec-12) Can somebody suggest a way around that? Imports System Imports System.Windows.Forms Imports System.Drawing Imports System.Drawing.Printing Imports System.Collections Imports System.Data Namespace Print Public Class PrinterClass '//clone of Datagrid Dim PrintGrid As Grid '//printdocument for initial printer settings Private PrintDoc As PrintDocument '//defines whether the grid is ordered right to left Private bRightToLeft As Boolean '//Current Top Private CurrentY As Single = 0 '//Current Left Private CurrentX As Single = 0 '//CurrentRow to print Private CurrentRow As Integer = 0 '//Page Counter Public PageCounter As Integer = 0 '/// <summary> '/// Constructor Class '/// </summary> '/// <param name="pdocument"></param> '/// <param name="dgrid"></param> Public Sub New(ByVal pdocument As PrintDocument, ByVal dgrid As DataGrid) 'MyBase.new() PrintGrid = New Grid(dgrid) PrintDoc = pdocument '//The grid columns are right to left bRightToLeft = dgrid.RightToLeft = RightToLeft.Yes '//init CurrentX and CurrentY CurrentY = pdocument.DefaultPageSettings.Margins.Top CurrentX = pdocument.DefaultPageSettings.Margins.Left End Sub Public Function Print(ByVal g As Graphics, ByRef currentX As Single, ByRef currentY As Single) As Boolean '//use predefined area currentX = currentX currentY = currentY PrintHeaders(g) Dim Morepages As Boolean = PrintDataGrid(g) currentY = currentY currentX = currentX Return Morepages End Function Public Function Print(ByVal g As Graphics) As Boolean CurrentX = PrintDoc.DefaultPageSettings.Margins.Left CurrentY = PrintDoc.DefaultPageSettings.Margins.Top PrintHeaders(g) Return PrintDataGrid(g) End Function '/// <summary> '/// Print the Grid Headers '/// </summary> '/// <param name="g"></param> Private Sub PrintHeaders(ByVal g As Graphics) Dim sf As StringFormat = New StringFormat '//if we want to print the grid right to left If (bRightToLeft) Then CurrentX = PrintDoc.DefaultPageSettings.PaperSize.Width - PrintDoc.DefaultPageSettings.Margins.Right sf.FormatFlags = StringFormatFlags.DirectionRightToLeft Else CurrentX = PrintDoc.DefaultPageSettings.Margins.Left End If Dim i As Integer For i = 0 To PrintGrid.Columns - 1 '//set header alignment Select Case (CType(PrintGrid.Headers.GetValue(i), Header).Alignment) Case HorizontalAlignment.Left 'left sf.Alignment = StringAlignment.Near Case HorizontalAlignment.Center sf.Alignment = StringAlignment.Center Case HorizontalAlignment.Right sf.Alignment = StringAlignment.Far End Select '//advance X according to order If (bRightToLeft) Then '//draw the cell bounds (lines) and back color g.FillRectangle(New SolidBrush(PrintGrid.HeaderBackColor), CurrentX - PrintGrid.Headers(i).Width, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height) g.DrawRectangle(New Pen(PrintGrid.LineColor), CurrentX - PrintGrid.Headers(i).Width, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height) '//draw the cell text g.DrawString(PrintGrid.Headers(i).CText, PrintGrid.Headers(i).Font, New SolidBrush(PrintGrid.HeaderForeColor), New RectangleF(CurrentX - PrintGrid.Headers(i).Width, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height), sf) '//next cell CurrentX -= PrintGrid.Headers(i).Width Else '//draw the cell bounds (lines) and back color g.FillRectangle(New SolidBrush(PrintGrid.HeaderBackColor), CurrentX, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height) g.DrawRectangle(New Pen(PrintGrid.LineColor), CurrentX, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height) '//draw the cell text g.DrawString(PrintGrid.Headers(i).CText, PrintGrid.Headers(i).Font, New SolidBrush(PrintGrid.HeaderForeColor), New RectangleF(CurrentX, CurrentY, PrintGrid.Headers(i).Width, PrintGrid.Headers(i).Height), sf) '//next cell CurrentX += PrintGrid.Headers(i).Width End If Next '//reset to beginning If (bRightToLeft) Then '//right align CurrentX = PrintDoc.DefaultPageSettings.PaperSize.Width - PrintDoc.DefaultPageSettings.Margins.Right Else '//left align CurrentX = PrintDoc.DefaultPageSettings.Margins.Left End If '//advance to next row CurrentY = CurrentY + CType(PrintGrid.Headers.GetValue(0), Header).Height End Sub Private Function PrintDataGrid(ByVal g As Graphics) As Boolean Dim sf As StringFormat = New StringFormat PageCounter = PageCounter + 1 '//if we want to print the grid right to left If (bRightToLeft) Then CurrentX = PrintDoc.DefaultPageSettings.PaperSize.Width - PrintDoc.DefaultPageSettings.Margins.Right sf.FormatFlags = StringFormatFlags.DirectionRightToLeft Else CurrentX = PrintDoc.DefaultPageSettings.Margins.Left End If Dim i As Integer For i = CurrentRow To PrintGrid.Rows - 1 Dim j As Integer For j = 0 To PrintGrid.Columns - 1 '//set cell alignment Select Case (PrintGrid.Cell(i, j).Alignment) '//left Case HorizontalAlignment.Left sf.Alignment = StringAlignment.Near Case HorizontalAlignment.Center sf.Alignment = StringAlignment.Center '//right Case HorizontalAlignment.Right sf.Alignment = StringAlignment.Far End Select '//advance X according to order If (bRightToLeft) Then '//draw the cell bounds (lines) and back color g.FillRectangle(New SolidBrush(PrintGrid.BackColor), CurrentX - PrintGrid.Cell(i, j).Width, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height) g.DrawRectangle(New Pen(PrintGrid.LineColor), CurrentX - PrintGrid.Cell(i, j).Width, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height) '//draw the cell text g.DrawString(PrintGrid.Cell(i, j).CText, PrintGrid.Cell(i, j).Font, New SolidBrush(PrintGrid.ForeColor), New RectangleF(CurrentX - PrintGrid.Cell(i, j).Width, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height), sf) '//next cell CurrentX -= PrintGrid.Cell(i, j).Width Else '//draw the cell bounds (lines) and back color g.FillRectangle(New SolidBrush(PrintGrid.BackColor), CurrentX, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height) g.DrawRectangle(New Pen(PrintGrid.LineColor), CurrentX, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height) '//draw the cell text '//Draw text by alignment g.DrawString(PrintGrid.Cell(i, j).CText, PrintGrid.Cell(i, j).Font, New SolidBrush(PrintGrid.ForeColor), New RectangleF(CurrentX, CurrentY, PrintGrid.Cell(i, j).Width, PrintGrid.Cell(i, j).Height), sf) '//next cell CurrentX += PrintGrid.Cell(i, j).Width End If Next '//reset to beginning If (bRightToLeft) Then '//right align CurrentX = PrintDoc.DefaultPageSettings.PaperSize.Width - PrintDoc.DefaultPageSettings.Margins.Right Else '//left align CurrentX = PrintDoc.DefaultPageSettings.Margins.Left End If '//advance to next row CurrentY += PrintGrid.Cell(i, 0).Height CurrentRow += 1 '//if we are beyond the page margin (bottom) then we need another page, '//return true If (CurrentY > PrintDoc.DefaultPageSettings.PaperSize.Height - PrintDoc.DefaultPageSettings.Margins.Bottom) Then Return True End If Next Return False End Function End Class End Namespace

  Read the article

• Self-relation messes up contents in fetching

  - by holographix

  Hi folks, I'm dealing with an annoying problem in core data I've got a table named Character, which is made as follows I'm filling the table in various steps: 1) fill the attributes of the table 2) fill the Character Relation (charRel) FYI charRel is defined as follows I'm feeding the contents by pulling the data from an xml, the feeding code is this curStr = [[NSMutableString stringWithString:[curStr stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]] retain]; NSLog(@"Parsing relation within these keys %@, in order to get'em associated",curStr); NSArray *chunks = [curStr componentsSeparatedByString: @","]; for( NSString *relId in chunks ) { NSLog(@"Associating %@ with id %@",[currentCharacter valueForKey:@"character_id"], relId); NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", relId]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:[self managedObjectContext] ]]; [request setPredicate:predicate]; NSerror *error = nil; NSArray *results = [[self managedObjectContext] executeFetchRequest:request error:&error]; // error handling code if(error != nil) { NSLog(@"[SYMBOL CORRELATION]: retrieving correlated symbol error: %@", [error localizedDescription]); } else if([results count] > 0) { Character *relatedChar = [results objectAtIndex:0]; // grab the first result in the stack, could be done better! [currentCharacter addCharRelObject:relatedChar]; //VICE VERSA RELATIONS NSArray *charRels = [relatedChar valueForKey:@"charRel"]; BOOL alreadyRelated = NO; for(Character *charRel in charRels) { if([[charRel valueForKey:@"character_id"] isEqual:[currentCharacter valueForKey:@"character_id"]]) { alreadyRelated = YES; break; } } if(!alreadyRelated) { NSLog(@"\n\t\trelating %@ with %@", [relatedChar valueForKey:@"character_id"], [currentCharacter valueForKey:@"character_id"]); [relatedChar addCharRelObject:currentCharacter]; } } else { NSLog(@"[SYMBOL CORRELATION]: related symbol was not found! ##SKIPPING-->"); } [request release]; } NSLog(@"\t\t### TOTAL OF REALTIONS FOR ID %@: %d\n%@", [currentCharacter valueForKey:@"character_id"], [[currentCharacter valueForKey:@"charRel"] count], currentCharacter); error = nil; /* SAVE THE CONTEXT */ if (![managedObjectContext save:&error]) { NSLog(@"Whoops, couldn't save the symbol record: %@", [error localizedDescription]); NSArray* detailedErrors = [[error userInfo] objectForKey:NSDetailedErrorsKey]; if(detailedErrors != nil && [detailedErrors count] > 0) { for(NSError* detailedError in detailedErrors) { NSLog(@"\n################\t\tDetailedError: %@\n################", [detailedError userInfo]); } } else { NSLog(@" %@", [error userInfo]); } } at this point when I print out the values of the currentCharacter, everything looks perfect. every relation is in its place. in example in this log we can clearly see that this element has got 3 items in charRel: <Character: 0x5593af0> (entity: Character; id: 0x55938c0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p86> ; data: { catRel = "<relationship fault: 0x9a29db0 'catRel'>"; charRel = ( "0x9a1f870 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p74>", "0x9a14bd0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p109>", "0x558ba00 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p5>" ); "character_id" = 254; examplesRel = "<relationship fault: 0x9a29df0 'examplesRel'>"; meaning = "\n Left"; pinyin = "\n zu\U01d2"; "pronunciation_it" = "\n zu\U01d2"; strokenumber = 5; text = "\n \n <p>The most ancient form of this symbol"; unicodevalue = "\n \U5de6"; }) then when I'm in need of retrieving this item I perform an extraction, like this: // at first I get the single Character record NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSError *error; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", self.char_id ]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:_context ]]; [request setPredicate:predicate]; NSArray *fetchedObjs = [_context executeFetchRequest:request error:&error]; when, for instance, I print out in NSLog the contents of charRel NSArray *correlations = [singleCharacter valueForKey:@"charRel"]; NSLog(@"CHARACTER OBJECT \n%@", correlations); I get this Relationship fault for (<NSRelationshipDescription: 0x5568520>), name charRel, isOptional 1, isTransient 0, entity Character, renamingIdentifier charRel, validation predicates (), warnings (), versionHashModifier (null), destination entity Character, inverseRelationship (null), minCount 1, maxCount 99 on 0x6937f00 hope that I made myself clear. this thing is driving me insane, I've googled all over world, but I couldn't find a solution (and this make me think to as issue related to bad coding somehow :P). thank you in advance guys. k

  Read the article

• Network throughput issue (ARP-related)

  - by Joel Coel

  The small college where I work is having some very strange network issues. I'm looking for any advice or ideas here. We were fine over the summer, but the trouble began few days after students returned to campus in force for the fall term. Symptoms The main symptom is that internet access will work, but it's very slow... often to the point of timeouts. As an example, a typical result from Speedtest.net will return .4Mbps download, but allow 3 to 8 Mbps upload speed. Lesser symptoms may include severely limited performance transferring data to and from our file server, or even in some cases the inability to log in to the computer (cannot reach the domain controller). The issue crosses multiple vlans, and has effected devices on nearly every vlan we operate. The issue does not impact all machines on the network. An unaffected machine will typically see at least 11Mbps download from speedtest.net, and perhaps much more depending on larger campus traffic patterns at the time. There is one variation on the larger issue. We have one vlan where users were unable to log into nearly all of the machines at all. IT staff would log in using a local administrator account (or in some cases cached credentials), and from there a release/renew or pinging the gateway would allow the machine to work... for a while. Complicating this issue is that this vlan covers our computer labs, which use software called Deep Freeze to completely reset the hard drives after a reboot. It could just the same issue manifesting differently because of stale data on machines that have not permanently altered low-level info for weeks. We were able to solve this, however, by creating a new vlan and moving the labs over to the new vlan wholesale. Instigations Eventually we noticed that the effected machines all had recent dhcp leases. We can predict when a machine will become "slow" by watching when a dhcp lease comes up for renewal. We played with setting the lease time very short for a test vlan, but all that did was remove our ability to predict when the machine would become slow. Machines with static IPs have pretty much always worked normally. Manually releasing/renewing an address will never cause a machine to become slow. In fact, in some cases this process has fixed a machine in that state. Most of the time, though, it doesn't help. We also noticed that mobile machines like laptops are likely to become slow when they cross to new vlans. Wireless on campus is divided up into "zones", where each zone maps to a small set of buildings. Moving to a new building can place you in a zone, thereby causing you to get a new address. A machine resuming from sleep mode is also very likely to be slow. Mitigations Sometimes, but not always, clearing the arp cache on an effected machine will allow it to work normally again. As already mentioned, releasing/renewing a local machine's IP address can fix that machine, but it's not guaranteed. Pinging the default gateway can also sometimes help with a slow machine. What seems to help most to mitigate the issue is clearing the arp cache on our core layer-3 switch. This switch is used for our dhcp system as the default gateway on all vlans, and it handles inter-vlan routing. The model is a 3Com 4900SX. To try to mitigate the issue, we have the cache timeout set on the switch all the way down to the lowest possible time, but it hasn't helped. I also put together a script that runs every few minutes to automatically connect to the switch and reset the cache. Unfortunately, this does not always work, and can even cause some machines to end up in the slow state for a short time (though these seem to correct themselves after a few minutes). We currently have a scheduled job that runs every 10 minutes to force the core switch to clear it's ARP cache, but this is far from perfect or desirable. Reproduction We now have a test machine that we can force into the slow state at will. It is connected to a switch with ports set up for each of our vlans. We make the machine slow by connecting to different vlans, and after a new connection or two it will be slow. It's also worth noting in this section that this has happened before at the start of prior terms, but in the past the problem has gone away on it's own after a few days. It solved itself before we had a chance to do much diagnostic work... hence why we've allowed it to drag so long into the term this time 'round; the expectation was this would be a short-lived situation. Other Factors It's worth mentioning that we have had about half a dozen switches just outright fail over the last year. These are mainly 2003/2004-era 3Coms (mostly 4200's) that were all put in at about the same time. They should still be covered under warranty, buy HP has made getting service somewhat difficult. Mostly in power supplies that have failed, but in a couple cases we have used a power supply from a switch with a failed mainboard to bring a switch with a failed power supply back to life. We do have UPS devices on all but three of four switches now, but that was not the case when I started two and a half years ago. Severe budget constraints (we were on the Dept. of Ed's financially challenged institutions list a couple years back) have forced me to look to the likes of Netgear and TrendNet for replacements, but so far these low-end models seem to be holding their own. It's also worth mentioning that the big change on our network this summer was migrating from a single cross-campus wireless SSID to the zoned approach mentioned earlier. I don't think this is the source of the issue, as like I've said: we've seen this before. However, it's possible this is exacerbating the issue, and may be much of the reason it's been so hard to isolate. Diagnosis At first it seemed clear to us, given the timing and persistent nature of the problem, that the source of the issue was an infected (or malicious) student machine doing ARP cache poisoning. However, repeated attempts to isolate the source have failed. Those attempts include numerous wireshark packet traces, and even taking entire buildings offline for brief periods. We have not been able even to find a smoking gun bad ARP entry. My current best guess is an overloaded or failing core switch, but I'm not sure on how to test for this, and the cost of replacing it blindly is steep. Again, any ideas appreciated.

  Read the article

• Redirecting or routing all traffic to OpenVPN on a Mac OS X client

  - by sdr56p

  I have configured an OpenVPN (2.2.1) server on an Ubuntu virtual machine in the Amazon elastic compute cloud. The server is up and running. I have installed OpenVPN (2.2.1) on a Mac OS X (10.8.2) client and I am using the openvpn2 binary to connect (in opposition to other clients like Tunnelblick or Viscosity). I can connect with the client and successfully ping or ssh the server through the tunnel. However, I can't redirect all internet traffic through the VPN even if I use the push "redirect-gateway def1 bypass-dhcp" option in the server.conf configurations. When I connect to the server with these configurations, I get a successful connection, but then an infinite series of error messages: "write UDPv4: No route to host (code=65)". Traffic routing seems to be compromised because I am not able to access anything anymore, not even the OpenVPN server (by pinging 10.8.0.1 for instance). This is beyond me. I am finding little help on the web and don't know what to try next. I don't think it is a problem of forwarding the traffic on the server since, first, I have also took care of that and, second, I can't even ping the VPN server locally through the tunnel (or ping anything at all for that matter). Thank you for your help. Here is the server.conf. file: port 1194 proto udp dev tun ca ca.crt cert ec2-server.crt key ec2-server.key # This file should be kept secret dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 And the client.conf file: client dev tun proto udp remote servername.com 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert Toto5.crt key Toto5.key ns-cert-type server comp-lzo verb 3 Here is the connection log with the error messages: $ sudo openvpn2 --config client.conf Wed Mar 13 22:58:22 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:22 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:22 2013 LZO compression initialized Wed Mar 13 22:58:22 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:22 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:22 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:22 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:22 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:22 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:22 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:22 2013 TLS: Initial packet from 54.234.43.171:1194, sid=ffbaf343 d0c1a266 Wed Mar 13 22:58:22 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:22 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:22 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:23 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:58:25 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:58:25 2013 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:58:25 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:58:25 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:58:25 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:58:25 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:25 2013 Initialization Sequence Completed ^CWed Mar 13 22:58:30 2013 event_wait : Interrupted system call (code=4) Wed Mar 13 22:58:30 2013 TCP/UDP: Closing socket Wed Mar 13 22:58:30 2013 /sbin/route delete -net 10.8.0.0 10.8.0.5 255.255.255.0 delete net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:30 2013 Closing TUN/TAP interface Wed Mar 13 22:58:30 2013 SIGINT[hard,] received, process exiting toto5:ttntec2 Dominic$ sudo openvpn2 --config client.conf --remote ec2-54-234-43-171.compute-1.amazonaws.com Wed Mar 13 22:58:57 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:57 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:57 2013 LZO compression initialized Wed Mar 13 22:58:57 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:57 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:57 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:57 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:57 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:57 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:57 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:57 2013 TLS: Initial packet from 54.234.43.171:1194, sid=a0d75468 ec26de14 Wed Mar 13 22:58:58 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:58 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:58 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:59:00 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:59:00 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:59:00 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:59:00 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:59:00 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:59:00 2013 /sbin/route add -net 54.234.43.171 0.0.0.0 255.255.255.255 add net 54.234.43.171: gateway 0.0.0.0 Wed Mar 13 22:59:00 2013 /sbin/route add -net 0.0.0.0 10.8.0.5 128.0.0.0 add net 0.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 128.0.0.0 10.8.0.5 128.0.0.0 add net 128.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 Initialization Sequence Completed Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) ... The routing table after a connection WITHOUT the push redirect-gateway (all traffic is not redirected to the VPN and everything is working fine, I can ping or ssh the OpenVPN server and access all other Internet resources through my default gateway): Destination Gateway Flags Refs Use Netif Expire default user148-1.wireless UGSc 50 0 en1 10.8/24 10.8.0.5 UGSc 2 7 tun0 10.8.0.5 10.8.0.6 UH 3 2 tun0 127 localhost UCS 0 0 lo0 localhost localhost UH 6 6692 lo0 client.openvpn.net client.openvpn.net UH 3 18 lo0 142.1.148/22 link#5 UCS 2 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 50 0 en1 76 user150-173.wirele localhost UHS 0 0 lo0 142.1.151.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSWi 0 0 en1 71 The routing table after a connection with the push redirect-gateway option enable as in the server.conf file above (all internet traffic should be redirected to the VPN tunnel, but nothing is working, I can't access any Internet ressources at all): Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 1 0 tun0 default user148-1.wireless UGSc 7 0 en1 10.8/24 10.8.0.5 UGSc 0 0 tun0 10.8.0.5 10.8.0.6 UHr 6 0 tun0 54.234.43.171/32 0.0.0.0 UGSc 1 0 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 3 6698 lo0 client.openvpn.net client.openvpn.net UH 0 27 lo0 128.0/1 10.8.0.5 UGSc 2 0 tun0 142.1.148/22 link#5 UCS 1 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 1 0 en1 833 user150-173.wirele localhost UHS 0 0 lo0 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSW 0 0 en1

  Read the article

• css problem with unordered lists (as usual with IE)

  - by Emin

  I am using un-ordered lists that nests some divs to show the desired output on screen. I am using css to style them and they seem to look perfect on chrome and firefox. But in IE(8) it looks there is a problem which I was unable to locate. I am using the below CSS <style type="text/css"> .ur_container {width:980px; padding: 0; margin: 0;} .ur_container ul.bx_grp {list-style-type: none; padding: 0px; margin: 0px; } .ur_container ul.bx_lnx {list-style-type: none; padding: 5px; margin: 0px; } .bx_grp {border:1px solid #c5c5c5; background-color: yellow; margin:0; padding:0;} .bx_grp_header {background-color: #d6d6d6; border-bottom:1px solid #acacac;} .bx_grp_title {float: left; font: bold 11px Arial; padding:5px;} .bx_grp_options {float: right; font: 10px Arial; padding: 5px;} .bx_grp_options a{color: #125B93; text-decoration: none; } .bx_lnx {padding:0px; background-color: red;} .bx_lnx_header {font:11px Arial; color:#333;} .bx_lnx_title {float: left;} .bx_lnx_refno {background-color:#333; color: fff; padding: 1px; margin-right: 5px; } .bx_lnx_options {float: right;} .bx_lnx_options a {color: #258CF4; text-decoration: none;} .bx_lnx_url {font: 9px Arial; color: #999; margin-top: 4px; } .bx_lnx_notes {} .bx_lnx_notes span {background-color: #FDFFCC; color: #666; font: 9px Arial; padding:2px;} .bx_lnx_tags {} .bx_lnx_tags span {background-color: #efefef; border-bottom: 1px solid #ccc; color: #666; font: 9px Arial; padding: 1px 2px 1px 2px; margin-right: 5px;} </style> Against the following HTML <div class="ur_container"> <ul class="bx_grp" id="grp_1"> <li> <div class="bx_grp_header"> <span class="bx_grp_title">Personal File</span> <span class="bx_grp_options"><a href="#">rename</a> &bull; <a href="#">make private</a> &bull; <a href="#">hide</a href="#"> &bull; <a href="#">delete</a></span> <div style="clear: both;"></div> </div> </li> <li> <ul class="bx_lnx" id="lnx_1"> <li> <div class="bx_lnx_header"> <span class="bx_linx_title"><span class="bx_lnx_refno">#3103</span>How to file personal files</span> <span class="bx_lnx_options"><a href="#">edit</a> &bull; <a href="#">move</a> &bull; <a href="#">delete</a></span> </div> </li> <li class="bx_lnx_url">http://www.google.com</li> <li class="bx_lnx_notes"><span>search google for this</span></li> <li class="bx_lnx_tags"><span>personal</span><span>file</span><span>google</span></li> </ul> </li> </ul> </div> Which produces this output in Chrome and Fireworks and the following in IE The yellow and red colors was used in order to show that is being going wrong. The yellow part is the undesired one. Can anyone point me in the right direction please ? Regards

  Read the article

• Which workaround to use for the following SQL deadlock?

  - by Marko

  I found a SQL deadlock scenario in my application during concurrency. I belive that the two statements that cause the deadlock are (note - I'm using LINQ2SQL and DataContext.ExecuteCommand(), that's where this.studioId.ToString() comes into play): exec sp_executesql N'INSERT INTO HQ.dbo.SynchronizingRows ([StudioId], [UpdatedRowId]) SELECT @p0, [t0].[Id] FROM [dbo].[UpdatedRows] AS [t0] WHERE NOT (EXISTS( SELECT NULL AS [EMPTY] FROM [dbo].[ReceivedUpdatedRows] AS [t1] WHERE ([t1].[StudioId] = @p0) AND ([t1].[UpdatedRowId] = [t0].[Id]) ))',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; and exec sp_executesql N'INSERT INTO HQ.dbo.ReceivedUpdatedRows ([UpdatedRowId], [StudioId], [ReceiveDateTime]) SELECT [t0].[UpdatedRowId], @p0, GETDATE() FROM [dbo].[SynchronizingRows] AS [t0] WHERE ([t0].[StudioId] = @p0)',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; The basic logic of my (client-server) application is this: Every time someone inserts or updates a row on the server side, I also insert a row into the table UpdatedRows, specifying the RowId of the modified row. When a client tries to synchronize data, it first copies all of the rows in the UpdatedRows table, that don't contain a reference row for the specific client in the table ReceivedUpdatedRows, to the table SynchronizingRows (the first statement taking part in the deadlock). Afterwards, during the synchronization I look for modified rows via lookup of the SynchronizingRows table. This step is required, otherwise if someone inserts new rows or modifies rows on the server side during synchronization I will miss them and won't get them during the next synchronization (explanation scenario to long to write here...). Once synchronization is complete, I insert rows to the ReceivedUpdatedRows table specifying that this client has received the UpdatedRows contained in the SynchronizingRows table (the second statement taking part in the deadlock). Finally I delete all rows from the SynchronizingRows table that belong to the current client. The way I see it, the deadlock is occuring on tables SynchronizingRows (abbreviation SR) and ReceivedUpdatedRows (abbreviation RUR) during steps 2 and 3 (one client is in step 2 and is inserting into SR and selecting from RUR; while another client is in step 3 inserting into RUR and selecting from SR). I googled a bit about SQL deadlocks and came to a conclusion that I have three options. Inorder to make a decision I need more input about each option/workaround: Workaround 1: The first advice given on the web about SQL deadlocks - restructure tables/queries so that deadlocks don't happen in the first place. Only problem with this is that with my IQ I don't see a way to do the synchronization logic any differently. If someone wishes to dwelve deeper into my current synchronization logic, how and why it is set up the way it is, I'll post a link for the explanation. Perhaps, with the help of someone smarter than me, it's possible to create a logic that is deadlock free. Workaround 2: The second most common advice seems to be the use of WITH(NOLOCK) hint. The problem with this is that NOLOCK might miss or duplicate some rows. Duplication is not a problem, but missing rows is catastrophic! Another option is the WITH(READPAST) hint. On the face of it, this seems to be a perfect solution. I really don't care about rows that other clients are inserting/modifying, because each row belongs only to a specific client, so I may very well skip locked rows. But the MSDN documentaion makes me a bit worried - "When READPAST is specified, both row-level and page-level locks are skipped". As I said, row-level locks would not be a problem, but page-level locks may very well be, since a page might contain rows that belong to multiple clients (including the current one). While there are lots of blog posts specifically mentioning that NOLOCK might miss rows, there seems to be none about READPAST (never) missing rows. This makes me skeptical and nervous to implement it, since there is no easy way to test it (implementing would be a piece of cake, just pop WITH(READPAST) into both statements SELECT clause and job done). Can someone confirm whether the READPAST hint can miss rows? Workaround 3: The final option is to use ALLOW_SNAPSHOT_ISOLATION and READ_COMMITED_SNAPSHOT. This would seem to be the only option to work 100% - at least I can't find any information that would contradict with it. But it is a little bit trickier to setup (I don't care much about the performance hit), because I'm using LINQ. Off the top of my head I probably need to manually open a SQL connection and pass it to the LINQ2SQL DataContext, etc... I haven't looked into the specifics very deeply. Mostly I would prefer option 2 if somone could only reassure me that READPAST will never miss rows concerning the current client (as I said before, each client has and only ever deals with it's own set of rows). Otherwise I'll likely have to implement option 3, since option 1 is probably impossible... I'll post the table definitions for the three tables as well, just in case: CREATE TABLE [dbo].[UpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY CLUSTERED, [RowId] [uniqueidentifier] NOT NULL, [UpdateDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE NONCLUSTERED INDEX IX_RowId ON dbo.UpdatedRows ([RowId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[ReceivedUpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY NONCLUSTERED, [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]), [StudioId] [uniqueidentifier] NOT NULL REFERENCES, [ReceiveDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE CLUSTERED INDEX IX_Studios ON dbo.ReceivedUpdatedRows ([StudioId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[SynchronizingRows]( [StudioId] [uniqueidentifier] NOT NULL [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]) PRIMARY KEY CLUSTERED ([StudioId], [UpdatedRowId]) ) ON [PRIMARY] GO PS! Studio = Client. PS2! I just noticed that the index definitions have ALLOW_PAGE_LOCK=ON. If I would turn it off, would that make any difference to READPAST? Are there any negative downsides for turning it off?

  Read the article

• How to model a relationship that NHibernate (or Hibernate) doesn’t easily support

  - by MylesRip

  I have a situation in which the ideal relationship, I believe, would involve Value Object Inheritance. This is unfortunately not supported in NHibernate so any solution I come up with will be less than perfect. Let’s say that: “Item” entities have a “Location” that can be in one of multiple different formats. These formats are completely different with no overlapping fields. We will deal with each Location in the format that is provided in the data with no attempt to convert from one format to another. Each Item has exactly one Location. “SpecialItem” is a subtype of Item, however, that is unique in that it has exactly two Locations. “Group” entities aggregate Items. “LocationGroup” is as subtype of Group. LocationGroup also has a single Location that can be in any of the formats as described above. Although I’m interested in Items by Group, I’m also interested in being able to find all items with the same Location, regardless of which group they are in. I apologize for the number of stipulations listed above, but I’m afraid that simplifying it any further wouldn’t really reflect the difficulties of the situation. Here is how the above could be diagrammed: Mapping Dilemma Diagram: (http://www.freeimagehosting.net/uploads/592ad48b1a.jpg) (I tried placing the diagram inline, but Stack Overflow won't allow that until I have accumulated more points. I understand the reasoning behind it, but it is a bit inconvenient for now.) Hmmm... Apparently I can't have multiple links either. :-( Analyzing the above, I make the following observations: I treat Locations polymorphically, referring to the supertype rather than the subtype. Logically, Locations should be “Value Objects” rather than entities since it is meaningless to differentiate between two Location objects that have all the same values. Thus equality between Locations should be based on field comparisons, not identifiers. Also, value objects should be immutable and shared references should not be allowed. Using NHibernate (or Hibernate) one would typically map value objects using the “component” keyword which would cause the fields of the class to be mapped directly into the database table that represents the containing class. Put another way, there would not be a separate “Locations” table in the database (and Locations would therefore have no identifiers). NHibernate (or Hibernate) do not currently support inheritance for value objects. My choices as I see them are: Ignore the fact that Locations should be value objects and map them as entities. This would take care of the inheritance mapping issues since NHibernate supports entity inheritance. The downside is that I then have to deal with aliasing issues. (Meaning that if multiple objects share a reference to the same Location, then changing values for one object’s Location would cause the location to change for other objects that share the reference the same Location record.) I want to avoid this if possible. Another downside is that entities are typically compared by their IDs. This would mean that two Location objects would be considered not equal even if the values of all their fields are the same. This would be invalid and unacceptable from the business perspective. Flatten Locations into a single class so that there are no longer inheritance relationships for Locations. This would allow Locations to be treated as value objects which could easily be handled by using “component” mapping in NHibernate. The downside in this case would be that the domain model becomes weaker, more fragile and less maintainable. Do some “creative” mapping in the hbm files in order to force Location fields to be mapped into the containing entities’ tables without using the “component” keyword. This approach is described by Colin Jack here. My situation is more complicated than the one he describes due to the fact that SpecialItem has a second Location and the fact that a different entity, LocatedGroup, also has Locations. I could probably get it to work, but the mappings would be non-intuitive and therefore hard to understand and maintain by other developers in the future. Also, I suspect that these tricky mappings would likely not be possible using Fluent NHibernate so I would use the advantages of using that tool, at least in that situation. Surely others out there have run into similar situations. I’m hoping someone who has “been there, done that” can share some wisdom. :-) So here’s the question… Which approach should be preferred in this situation? Why?

  Read the article

• HTG Reviews the CODE Keyboard: Old School Construction Meets Modern Amenities

  - by Jason Fitzpatrick

  There’s nothing quite as satisfying as the smooth and crisp action of a well built keyboard. If you’re tired of  mushy keys and cheap feeling keyboards, a well-constructed mechanical keyboard is a welcome respite from the $10 keyboard that came with your computer. Read on as we put the CODE mechanical keyboard through the paces. What is the CODE Keyboard? The CODE keyboard is a collaboration between manufacturer WASD Keyboards and Jeff Atwood of Coding Horror (the guy behind the Stack Exchange network and Discourse forum software). Atwood’s focus was incorporating the best of traditional mechanical keyboards and the best of modern keyboard usability improvements. In his own words: The world is awash in terrible, crappy, no name how-cheap-can-we-make-it keyboards. There are a few dozen better mechanical keyboard options out there. I’ve owned and used at least six different expensive mechanical keyboards, but I wasn’t satisfied with any of them, either: they didn’t have backlighting, were ugly, had terrible design, or were missing basic functions like media keys. That’s why I originally contacted Weyman Kwong of WASD Keyboards way back in early 2012. I told him that the state of keyboards was unacceptable to me as a geek, and I proposed a partnership wherein I was willing to work with him to do whatever it takes to produce a truly great mechanical keyboard. Even the ardent skeptic who questions whether Atwood has indeed created a truly great mechanical keyboard certainly can’t argue with the position he starts from: there are so many agonizingly crappy keyboards out there. Even worse, in our opinion, is that unless you’re a typist of a certain vintage there’s a good chance you’ve never actually typed on a really nice keyboard. Those that didn’t start using computers until the mid-to-late 1990s most likely have always typed on modern mushy-key keyboards and never known the joy of typing on a really responsive and crisp mechanical keyboard. Is our preference for and love of mechanical keyboards shining through here? Good. We’re not even going to try and hide it. So where does the CODE keyboard stack up in pantheon of keyboards? Read on as we walk you through the simple setup and our experience using the CODE. Setting Up the CODE Keyboard Although the setup of the CODE keyboard is essentially plug and play, there are two distinct setup steps that you likely haven’t had to perform on a previous keyboard. Both highlight the degree of care put into the keyboard and the amount of customization available. Inside the box you’ll find the keyboard, a micro USB cable, a USB-to-PS2 adapter, and a tool which you may be unfamiliar with: a key puller. We’ll return to the key puller in a moment. Unlike the majority of keyboards on the market, the cord isn’t permanently affixed to the keyboard. What does this mean for you? Aside from the obvious need to plug it in yourself, it makes it dead simple to repair your own keyboard cord if it gets attacked by a pet, mangled in a mechanism on your desk, or otherwise damaged. It also makes it easy to take advantage of the cable routing channels in on the underside of the keyboard to  route your cable exactly where you want it. While we’re staring at the underside of the keyboard, check out those beefy rubber feet. By peripherals standards they’re huge (and there is six instead of the usual four). Once you plunk the keyboard down where you want it, it might as well be glued down the rubber feet work so well. After you’ve secured the cable and adjusted it to your liking, there is one more task  before plug the keyboard into the computer. On the bottom left-hand side of the keyboard, you’ll find a small recess in the plastic with some dip switches inside: The dip switches are there to switch hardware functions for various operating systems, keyboard layouts, and to enable/disable function keys. By toggling the dip switches you can change the keyboard from QWERTY mode to Dvorak mode and Colemak mode, the two most popular alternative keyboard configurations. You can also use the switches to enable Mac-functionality (for Command/Option keys). One of our favorite little toggles is the SW3 dip switch: you can disable the Caps Lock key; goodbye accidentally pressing Caps when you mean to press Shift. You can review the entire dip switch configuration chart here. The quick-start for Windows users is simple: double check that all the switches are in the off position (as seen in the photo above) and then simply toggle SW6 on to enable the media and backlighting function keys (this turns the menu key on the keyboard into a function key as typically found on laptop keyboards). After adjusting the dip switches to your liking, plug the keyboard into an open USB port on your computer (or into your PS/2 port using the included adapter). Design, Layout, and Backlighting The CODE keyboard comes in two flavors, a traditional 87-key layout (no number pad) and a traditional 104-key layout (number pad on the right hand side). We identify the layout as traditional because, despite some modern trapping and sneaky shortcuts, the actual form factor of the keyboard from the shape of the keys to the spacing and position is as classic as it comes. You won’t have to learn a new keyboard layout and spend weeks conditioning yourself to a smaller than normal backspace key or a PgUp/PgDn pair in an unconventional location. Just because the keyboard is very conventional in layout, however, doesn’t mean you’ll be missing modern amenities like media-control keys. The following additional functions are hidden in the F11, F12, Pause button, and the 2×6 grid formed by the Insert and Delete rows: keyboard illumination brightness, keyboard illumination on/off, mute, and then the typical play/pause, forward/backward, stop, and volume +/- in Insert and Delete rows, respectively. While we weren’t sure what we’d think of the function-key system at first (especially after retiring a Microsoft Sidewinder keyboard with a huge and easily accessible volume knob on it), it took less than a day for us to adapt to using the Fn key, located next to the right Ctrl key, to adjust our media playback on the fly. Keyboard backlighting is a largely hit-or-miss undertaking but the CODE keyboard nails it. Not only does it have pleasant and easily adjustable through-the-keys lighting but the key switches the keys themselves are attached to are mounted to a steel plate with white paint. Enough of the light reflects off the interior cavity of the keys and then diffuses across the white plate to provide nice even illumination in between the keys. Highlighting the steel plate beneath the keys brings us to the actual construction of the keyboard. It’s rock solid. The 87-key model, the one we tested, is 2.0 pounds. The 104-key is nearly a half pound heavier at 2.42 pounds. Between the steel plate, the extra-thick PCB board beneath the steel plate, and the thick ABS plastic housing, the keyboard has very solid feel to it. Combine that heft with the previously mentioned thick rubber feet and you have a tank-like keyboard that won’t budge a millimeter during normal use. Examining The Keys This is the section of the review the hardcore typists and keyboard ninjas have been waiting for. We’ve looked at the layout of the keyboard, we’ve looked at the general construction of it, but what about the actual keys? There are a wide variety of keyboard construction techniques but the vast majority of modern keyboards use a rubber-dome construction. The key is floated in a plastic frame over a rubber membrane that has a little rubber dome for each key. The press of the physical key compresses the rubber dome downwards and a little bit of conductive material on the inside of the dome’s apex connects with the circuit board. Despite the near ubiquity of the design, many people dislike it. The principal complaint is that dome keyboards require a complete compression to register a keystroke; keyboard designers and enthusiasts refer to this as “bottoming out”. In other words, the register the “b” key, you need to completely press that key down. As such it slows you down and requires additional pressure and movement that, over the course of tens of thousands of keystrokes, adds up to a whole lot of wasted time and fatigue. The CODE keyboard features key switches manufactured by Cherry, a company that has manufactured key switches since the 1960s. Specifically the CODE features Cherry MX Clear switches. These switches feature the same classic design of the other Cherry switches (such as the MX Blue and Brown switch lineups) but they are significantly quieter (yes this is a mechanical keyboard, but no, your neighbors won’t think you’re firing off a machine gun) as they lack the audible click found in most Cherry switches. This isn’t to say that they keyboard doesn’t have a nice audible key press sound when the key is fully depressed, but that the key mechanism isn’t doesn’t create a loud click sound when triggered. One of the great features of the Cherry MX clear is a tactile “bump” that indicates the key has been compressed enough to register the stroke. For touch typists the very subtle tactile feedback is a great indicator that you can move on to the next stroke and provides a welcome speed boost. Even if you’re not trying to break any word-per-minute records, that little bump when pressing the key is satisfying. The Cherry key switches, in addition to providing a much more pleasant typing experience, are also significantly more durable than dome-style key switch. Rubber dome switch membrane keyboards are typically rated for 5-10 million contacts whereas the Cherry mechanical switches are rated for 50 million contacts. You’d have to write the next War and Peace  and follow that up with A Tale of Two Cities: Zombie Edition, and then turn around and transcribe them both into a dozen different languages to even begin putting a tiny dent in the lifecycle of this keyboard. So what do the switches look like under the classicly styled keys? You can take a look yourself with the included key puller. Slide the loop between the keys and then gently beneath the key you wish to remove: Wiggle the key puller gently back and forth while exerting a gentle upward pressure to pop the key off; You can repeat the process for every key, if you ever find yourself needing to extract piles of cat hair, Cheeto dust, or other foreign objects from your keyboard. There it is, the naked switch, the source of that wonderful crisp action with the tactile bump on each keystroke. The last feature worthy of a mention is the N-key rollover functionality of the keyboard. This is a feature you simply won’t find on non-mechanical keyboards and even gaming keyboards typically only have any sort of key roller on the high-frequency keys like WASD. So what is N-key rollover and why do you care? On a typical mass-produced rubber-dome keyboard you cannot simultaneously press more than two keys as the third one doesn’t register. PS/2 keyboards allow for unlimited rollover (in other words you can’t out type the keyboard as all of your keystrokes, no matter how fast, will register); if you use the CODE keyboard with the PS/2 adapter you gain this ability. If you don’t use the PS/2 adapter and use the native USB, you still get 6-key rollover (and the CTRL, ALT, and SHIFT don’t count towards the 6) so realistically you still won’t be able to out type the computer as even the more finger twisting keyboard combos and high speed typing will still fall well within the 6-key rollover. The rollover absolutely doesn’t matter if you’re a slow hunt-and-peck typist, but if you’ve read this far into a keyboard review there’s a good chance that you’re a serious typist and that kind of quality construction and high-number key rollover is a fantastic feature.  The Good, The Bad, and the Verdict We’ve put the CODE keyboard through the paces, we’ve played games with it, typed articles with it, left lengthy comments on Reddit, and otherwise used and abused it like we would any other keyboard. The Good: The construction is rock solid. In an emergency, we’re confident we could use the keyboard as a blunt weapon (and then resume using it later in the day with no ill effect on the keyboard). The Cherry switches are an absolute pleasure to type on; the Clear variety found in the CODE keyboard offer a really nice middle-ground between the gun-shot clack of a louder mechanical switch and the quietness of a lesser-quality dome keyboard without sacrificing quality. Touch typists will love the subtle tactile bump feedback. Dip switch system makes it very easy for users on different systems and with different keyboard layout needs to switch between operating system and keyboard layouts. If you’re investing a chunk of change in a keyboard it’s nice to know you can take it with you to a different operating system or “upgrade” it to a new layout if you decide to take up Dvorak-style typing. The backlighting is perfect. You can adjust it from a barely-visible glow to a blazing light-up-the-room brightness. Whatever your intesity preference, the white-coated steel backplate does a great job diffusing the light between the keys. You can easily remove the keys for cleaning (or to rearrange the letters to support a new keyboard layout). The weight of the unit combined with the extra thick rubber feet keep it planted exactly where you place it on the desk. The Bad: While you’re getting your money’s worth, the $150 price tag is a shock when compared to the $20-60 price tags you find on lower-end keyboards. People used to large dedicated media keys independent of the traditional key layout (such as the large buttons and volume controls found on many modern keyboards) might be off put by the Fn-key style media controls on the CODE. The Verdict: The keyboard is clearly and heavily influenced by the needs of serious typists. Whether you’re a programmer, transcriptionist, or just somebody that wants to leave the lengthiest article comments the Internet has ever seen, the CODE keyboard offers a rock solid typing experience. Yes, $150 isn’t pocket change, but the quality of the CODE keyboard is so high and the typing experience is so enjoyable, you’re easily getting ten times the value you’d get out of purchasing a lesser keyboard. Even compared to other mechanical keyboards on the market, like the Das Keyboard, you’re still getting more for your money as other mechanical keyboards don’t come with the lovely-to-type-on Cherry MX Clear switches, back lighting, and hardware-based operating system keyboard layout switching. If it’s in your budget to upgrade your keyboard (especially if you’ve been slogging along with a low-end rubber-dome keyboard) there’s no good reason to not pickup a CODE keyboard. Key animation courtesy of Geekhack.org user Lethal Squirrel.       

  Read the article

• Jolicloud is a Nifty New OS for Your Netbook

  - by Matthew Guay

  Want to breathe new life into your netbook?  Here’s a quick look at Jolicloud, a unique new Linux based OS that lets you use your netbook in a whole new way. Netbooks have been an interesting category of computers.  When they were first released, most netbooks came with a stripped down Linux based operating system designed to let you easily access the internet first and foremost.  Consumers wanted more from their netbooks, so full OSes such as Windows XP and Ubuntu became the standard on netbooks.  Microsoft worked hard to get Windows 7 working great on netbooks, and today most netbooks run Windows 7 great.  But the Linux community hasn’t stood still either, and Jolicloud is proof of that.  Jolicloud is a unique OS designed to bring the best of both webapps and standard programs to your netbook.   Keep reading to see if this is the perfect netbook OS for you. Getting Started Installing Jolicloud on your netbook is easy thanks to a the Jolicloud Express installer for Windows.  Since many netbooks run Windows by default, this makes it easy to install Jolicloud.  Plus, your Windows install is left untouched, so you can still easily access all your Windows files and programs. Download and run the roughly 700Mb installer (link below) just as a normal installer in Windows. This will first extract the needed files. Click Get started to install Jolicloud on your netbook. Enter a username, password, and nickname for your computer.  Please note that the username must be all lowercase, and the nickname should not contain spaces or special characters.   Now you can review the default installation settings.  By default it will take up 39Gb and install on your C:\ drive in English.  If you wish to change this, click Change. We chose to install it on the D: drive on this netbook, as its harddrive was already partitioned into two parts.  Click Save when your settings are all correct, and then click Next in the previous window. Jolicloud will prepare for the installation.  This took about 5 minutes in our test.  Click Next when this is finished. Click Restart now to install and run Jolicloud. When your netbook reboots, it will initialize the Jolicloud setup. It will then automatically finish the installation.  Just sit back and wait; there’s nothing for you to do right now.  The installation took about 20 minutes in our test. Jolicloud will automatically reboot when the setup is finished. Once it’s rebooted, you’re ready to go!  Enter the username, then the password, that you chose earlier when you were installing Jolicloud from Windows. Welcome to your Jolicloud desktop! Hardware Support We installed Jolicloud on a Samsung N150 netbook with an Atom N450 processor, 1Gb Ram, 250Gb harddrive, and WiFi b/g/n with Bluetooth.  Amazingly, once Jolicloud was installed, everything was ready to use.  No drivers to install, no settings to hassle with, it was all installed and set up perfectly.  Power settings worked great, and closing the netbook put it to sleep just like in Windows. WiFi drivers have typically been difficult to find and install on Linux, but Jolicloud had our netbook’s wifi working immediately.  To get online, simply click the Wireless icon on the top right, and select the wireless network you want to connect to. Jolicloud will let you know when it is signed on. Wired Lan networking was also seamless; simply connect your cable and you’re ready to go.  The webcam and touchpad also worked perfectly directly.  The only thing missing was multitouch; this touchpad has two finger scroll, pinch zoom, and other nice multitouch features in Windows, but in Julicloud it only functioned as a standard touchpad.  It did have tap to click activated by default, as well as right-side scrolling, which is nice. Jolicloud also supported our video card without any extra work.  The native resolution was already selected, and the only problem we had with the screen was that there was no apparent way to change the brightness.  This is not a major problem, but would be nice to have.  The Samsung N150 has Intel GMA3150 integrated graphics, and Jolicloud promises 1080p HD video on it.  It did playback 720p H.264 video flawlessly without installing anything extra, but it stuttered on full 1080p HD (which is the exact same as this netbook’s video playback in Windows 7 – 720p works great, but it stutters on 1080p).  We would be excited to see full HD on this netbook, but 720p is definitely fine for most stuff.   Jolicloud supports a wide range of netbooks, and based on our experience we would expect it to work as good on any supported hardware.  Check out the list of supported netbooks to see if your netbook is supported; if not, it still may work but you may have to install special drivers. Jolicloud’s performance was very similar to Windows 7 on our netbook.  It boots in about 30 seconds, and apps load fairly quickly.  In general, we couldn’t tell much difference in performance between Jolicloud and Windows 7, though this isn’t a problem since Windows 7 runs great on the current generation of netbooks. Using Jolicloud Ready to start putting Jolicloud to use?  Your fresh Jolicloud install you can run several built-in apps, such as Firefox, a calculator, and the chat client Pidgin.  It also has a media player and file viewer installed, so you can play MP3s or MPG videos, or read PDF ebooks without installing anything extra.  It also has Flash player installed so you can watch videos online easily. You can also directly access all of your files from the right side of your home screen.  You can even access your Windows files; in our test, the 116.9 GB Media was C: from Windows.  Select it to browse and open any file you had saved in Windows. You may need to enter your password to access it. Once you’re authenticated it, you’ll see all of your Windows files and folders.  Your User files (Documents, Music, Videos, etc.) will be in the Users folder. And, you can easily add files from removable media such as USB flash drives and memory cards.  Jolicloud recognized a flash drive we tested with no trouble at all. Add new apps But, the best part about Jolicloud is that it makes it very easy to install new apps.  Click the Get Started button on your homescreen. You’ll first need to create an account.  You can then use this same account on another netbook if you wish, and your settings will automatically be synced between the two. You can either signup using your Facebook account, …or you can sign up the traditional way with your email address, name, and password.  If you sign up this way, you will need to confirm your email address before your account will be finished. Now, choose your netbook model from the list, and enter a name for your computer. And that’s it!  You’ll now see the Jolicloud dashboard, which will show you updates and notifications from friends who also use Jolicloud. Click the App directory to find new apps for your netbook.  Here you will find a variety of webapps, such as Gmail, along with native applications, such as Skype, that you can install on your netbook.  Simply click the Install button on the right to add the app to your netbook. You will be prompted to enter your system password, and then the app will install without any further input.   Once an app is installed, a check mark will appear beside its name.  You can remove it by clicking the Remove button, and it will uninstall seamlessly. Webapps, such as Gmail, actually run in in a Chrome-powered window that lets the webapp run full screen.  This gives the webapps a native feel, but actually they’re just running the same as they would in a standard web browser.   The Jolicloud Interface Most apps run maximized, and there is no way to run them smaller.  This in general works good, since with small screens most apps need to run full-screen anyhow. Smaller apps, such as a calculator or the Pidgin chat client, run in a window just like they do on other operating systems. You can switch to another app that’s running by selecting it’s icon on the top left, or you can go back to the home screen by clicking the home screen.  If you’re finished with an program, simply click the red X button on the top right of the window when you’re running it. Or, you can switch between programs using standard keyboard shortcuts such as Alt-tab. The default page on the home screen is the favorites page, and all of your other programs are orginized in their own sections on the left hand side.  But, if you want to add one of these to your favorites page, simply right-click on it and select Add to Favorites. When you’re done for the day, you can simply close your netbook to put it to sleep.  Or, if you want to shut down, just press the Quit button on the bottom right of the home screen and then select Shut Down. Booting Jolicloud When you install Jolicloud, it will set itself as the default operating system.  Now, when you boot your netbook, it will show you a list of installed operating systems.  You can select either Windows or Jolicloud, but if you don’t make a selection it will boot into Jolicloud after waiting 10 seconds. If you’d perfer to boot into Windows by default, you can easily change this.  First, boot your netbook in to Windows.  Open the start menu, right-click on the Computer button, and select Properties.   Click the “Advanced system settings” link on the left side. Click the Settings button in the Startup and Recovery section. Now, select Windows as the default operating system, and click Ok.  Your netbook will now boot into Windows by default, but will give you 10 seconds to choose to boot into Jolicloud when you start your computer. Or, if you decided you don’t want Jolicloud, you can easily uninstall it from within Windows. Please note that this will also remove any files you may have saved in Jolicloud, so be sure to copy them to your Windows drive before uninstalling. To uninstall Jolicloud from within Windows, open Control Panel, and select Uninstall a Program. Scroll down to select Jolicloud, and click Uninstall/Change. Click Yes to confirm that you want to uninstall Jolicloud. After a few moments, it will let you know that Jolicloud has been uninstalled.  You’re netbook is now back the same as it was before you installed Jolicloud, with only Windows installed. Closing Whether you’re wanting to replace your current OS on your netbook or would simply like to try out a fresh new Linux version on your netbook, Jolicloud is a great option for you.  We were very impressed by it’s solid hardware support and the ease of installing new apps in Jolicloud.  Rather than simply giving us a standard OS, Jolicloud offers a unique way to use your netbook with native programs and webapps.  And whether you’re an IT pro or are a new computer user, Jolicloud was easy enough to use that anyone can do it.  Give it a try, and let us know what your favorite netbook OS is! Link Download Jolicloud for your netbook Similar Articles Productive Geek Tips How To Change XSplash Themes in Ubuntu 9.10Verify the Integrity of Windows Vista System FilesMonitor Multiple Logs in a Single Shell with MultiTail for LinuxHide Some or All of the GUI Bars in FirefoxAsk the Readers: Do You Use a Laptop, Desktop, or Both? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically

  Read the article

• Working with PivotTables in Excel

  - by Mark Virtue

  PivotTables are one of the most powerful features of Microsoft Excel.  They allow large amounts of data to be analyzed and summarized in just a few mouse clicks. In this article, we explore PivotTables, understand what they are, and learn how to create and customize them. Note:  This article is written using Excel 2010 (Beta).  The concept of a PivotTable has changed little over the years, but the method of creating one has changed in nearly every iteration of Excel.  If you are using a version of Excel that is not 2010, expect different screens from the ones you see in this article. A Little History In the early days of spreadsheet programs, Lotus 1-2-3 ruled the roost.  Its dominance was so complete that people thought it was a waste of time for Microsoft to bother developing their own spreadsheet software (Excel) to compete with Lotus.  Flash-forward to 2010, and Excel’s dominance of the spreadsheet market is greater than Lotus’s ever was, while the number of users still running Lotus 1-2-3 is approaching zero.  How did this happen?  What caused such a dramatic reversal of fortunes? Industry analysts put it down to two factors:  Firstly, Lotus decided that this fancy new GUI platform called “Windows” was a passing fad that would never take off.  They declined to create a Windows version of Lotus 1-2-3 (for a few years, anyway), predicting that their DOS version of the software was all anyone would ever need.  Microsoft, naturally, developed Excel exclusively for Windows.  Secondly, Microsoft developed a feature for Excel that Lotus didn’t provide in 1-2-3, namely PivotTables.  The PivotTables feature, exclusive to Excel, was deemed so staggeringly useful that people were willing to learn an entire new software package (Excel) rather than stick with a program (1-2-3) that didn’t have it.  This one feature, along with the misjudgment of the success of Windows, was the death-knell for Lotus 1-2-3, and the beginning of the success of Microsoft Excel. Understanding PivotTables So what is a PivotTable, exactly? Put simply, a PivotTable is a summary of some data, created to allow easy analysis of said data.  But unlike a manually created summary, Excel PivotTables are interactive.  Once you have created one, you can easily change it if it doesn’t offer the exact insights into your data that you were hoping for.  In a couple of clicks the summary can be “pivoted” – rotated in such a way that the column headings become row headings, and vice versa.  There’s a lot more that can be done, too.  Rather than try to describe all the features of PivotTables, we’ll simply demonstrate them… The data that you analyze using a PivotTable can’t be just any data – it has to be raw data, previously unprocessed (unsummarized) – typically a list of some sort.  An example of this might be the list of sales transactions in a company for the past six months. Examine the data shown below: Notice that this is not raw data.  In fact, it is already a summary of some sort.  In cell B3 we can see $30,000, which apparently is the total of James Cook’s sales for the month of January.  So where is the raw data?  How did we arrive at the figure of $30,000?  Where is the original list of sales transactions that this figure was generated from?  It’s clear that somewhere, someone must have gone to the trouble of collating all of the sales transactions for the past six months into the summary we see above.  How long do you suppose this took?  An hour?  Ten?  Probably. If we were to track down the original list of sales transactions, it might look something like this: You may be surprised to learn that, using the PivotTable feature of Excel, we can create a monthly sales summary similar to the one above in a few seconds, with only a few mouse clicks.  We can do this – and a lot more too! How to Create a PivotTable First, ensure that you have some raw data in a worksheet in Excel.  A list of financial transactions is typical, but it can be a list of just about anything:  Employee contact details, your CD collection, or fuel consumption figures for your company’s fleet of cars. So we start Excel… …and we load such a list… Once we have the list open in Excel, we’re ready to start creating the PivotTable. Click on any one single cell within the list: Then, from the Insert tab, click the PivotTable icon: The Create PivotTable box appears, asking you two questions:  What data should your new PivotTable be based on, and where should it be created?  Because we already clicked on a cell within the list (in the step above), the entire list surrounding that cell is already selected for us ($A$1:$G$88 on the Payments sheet, in this example).  Note that we could select a list in any other region of any other worksheet, or even some external data source, such as an Access database table, or even a MS-SQL Server database table.  We also need to select whether we want our new PivotTable to be created on a new worksheet, or on an existing one.  In this example we will select a new one: The new worksheet is created for us, and a blank PivotTable is created on that worksheet: Another box also appears:  The PivotTable Field List.  This field list will be shown whenever we click on any cell within the PivotTable (above): The list of fields in the top part of the box is actually the collection of column headings from the original raw data worksheet.  The four blank boxes in the lower part of the screen allow us to choose the way we would like our PivotTable to summarize the raw data.  So far, there is nothing in those boxes, so the PivotTable is blank.  All we need to do is drag fields down from the list above and drop them in the lower boxes.  A PivotTable is then automatically created to match our instructions.  If we get it wrong, we only need to drag the fields back to where they came from and/or drag new fields down to replace them. The Values box is arguably the most important of the four.  The field that is dragged into this box represents the data that needs to be summarized in some way (by summing, averaging, finding the maximum, minimum, etc).  It is almost always numerical data.  A perfect candidate for this box in our sample data is the “Amount” field/column.  Let’s drag that field into the Values box: Notice that (a) the “Amount” field in the list of fields is now ticked, and “Sum of Amount” has been added to the Values box, indicating that the amount column has been summed. If we examine the PivotTable itself, we indeed find the sum of all the “Amount” values from the raw data worksheet: We’ve created our first PivotTable!  Handy, but not particularly impressive.  It’s likely that we need a little more insight into our data than that. Referring to our sample data, we need to identify one or more column headings that we could conceivably use to split this total.  For example, we may decide that we would like to see a summary of our data where we have a row heading for each of the different salespersons in our company, and a total for each.  To achieve this, all we need to do is to drag the “Salesperson” field into the Row Labels box: Now, finally, things start to get interesting!  Our PivotTable starts to take shape….   With a couple of clicks we have created a table that would have taken a long time to do manually. So what else can we do?  Well, in one sense our PivotTable is complete.  We’ve created a useful summary of our source data.  The important stuff is already learned!  For the rest of the article, we will examine some ways that more complex PivotTables can be created, and ways that those PivotTables can be customized. First, we can create a two-dimensional table.  Let’s do that by using “Payment Method” as a column heading.  Simply drag the “Payment Method” heading to the Column Labels box: Which looks like this: Starting to get very cool! Let’s make it a three-dimensional table.  What could such a table possibly look like?  Well, let’s see… Drag the “Package” column/heading to the Report Filter box: Notice where it ends up…. This allows us to filter our report based on which “holiday package” was being purchased.  For example, we can see the breakdown of salesperson vs payment method for all packages, or, with a couple of clicks, change it to show the same breakdown for the “Sunseekers” package: And so, if you think about it the right way, our PivotTable is now three-dimensional.  Let’s keep customizing… If it turns out, say, that we only want to see cheque and credit card transactions (i.e. no cash transactions), then we can deselect the “Cash” item from the column headings.  Click the drop-down arrow next to Column Labels, and untick “Cash”: Let’s see what that looks like…As you can see, “Cash” is gone. Formatting This is obviously a very powerful system, but so far the results look very plain and boring.  For a start, the numbers that we’re summing do not look like dollar amounts – just plain old numbers.  Let’s rectify that. A temptation might be to do what we’re used to doing in such circumstances and simply select the whole table (or the whole worksheet) and use the standard number formatting buttons on the toolbar to complete the formatting.  The problem with that approach is that if you ever change the structure of the PivotTable in the future (which is 99% likely), then those number formats will be lost.  We need a way that will make them (semi-)permanent. First, we locate the “Sum of Amount” entry in the Values box, and click on it.  A menu appears.  We select Value Field Settings… from the menu: The Value Field Settings box appears. Click the Number Format button, and the standard Format Cells box appears: From the Category list, select (say) Accounting, and drop the number of decimal places to 0.  Click OK a few times to get back to the PivotTable… As you can see, the numbers have been correctly formatted as dollar amounts. While we’re on the subject of formatting, let’s format the entire PivotTable.  There are a few ways to do this.  Let’s use a simple one… Click the PivotTable Tools/Design tab: Then drop down the arrow in the bottom-right of the PivotTable Styles list to see a vast collection of built-in styles: Choose any one that appeals, and look at the result in your PivotTable:   Other Options We can work with dates as well.  Now usually, there are many, many dates in a transaction list such as the one we started with.  But Excel provides the option to group data items together by day, week, month, year, etc.  Let’s see how this is done. First, let’s remove the “Payment Method” column from the Column Labels box (simply drag it back up to the field list), and replace it with the “Date Booked” column: As you can see, this makes our PivotTable instantly useless, giving us one column for each date that a transaction occurred on – a very wide table! To fix this, right-click on any date and select Group… from the context-menu: The grouping box appears.  We select Months and click OK: Voila!  A much more useful table: (Incidentally, this table is virtually identical to the one shown at the beginning of this article – the original sales summary that was created manually.) Another cool thing to be aware of is that you can have more than one set of row headings (or column headings): …which looks like this…. You can do a similar thing with column headings (or even report filters). Keeping things simple again, let’s see how to plot averaged values, rather than summed values. First, click on “Sum of Amount”, and select Value Field Settings… from the context-menu that appears: In the Summarize value field by list in the Value Field Settings box, select Average: While we’re here, let’s change the Custom Name, from “Average of Amount” to something a little more concise.  Type in something like “Avg”: Click OK, and see what it looks like.  Notice that all the values change from summed totals to averages, and the table title (top-left cell) has changed to “Avg”: If we like, we can even have sums, averages and counts (counts = how many sales there were) all on the same PivotTable! Here are the steps to get something like that in place (starting from a blank PivotTable): Drag “Salesperson” into the Column Labels Drag “Amount” field down into the Values box three times For the first “Amount” field, change its custom name to “Total” and it’s number format to Accounting (0 decimal places) For the second “Amount” field, change its custom name to “Average”, its function to Average and it’s number format to Accounting (0 decimal places) For the third “Amount” field, change its name to “Count” and its function to Count Drag the automatically created field from Column Labels to Row Labels Here’s what we end up with: Total, average and count on the same PivotTable! Conclusion There are many, many more features and options for PivotTables created by Microsoft Excel – far too many to list in an article like this.  To fully cover the potential of PivotTables, a small book (or a large website) would be required.  Brave and/or geeky readers can explore PivotTables further quite easily:  Simply right-click on just about everything, and see what options become available to you.  There are also the two ribbon-tabs: PivotTable Tools/Options and Design.  It doesn’t matter if you make a mistake – it’s easy to delete the PivotTable and start again – a possibility old DOS users of Lotus 1-2-3 never had. We’ve included an Excel that should work with most versions of Excel, so you can download to practice your PivotTable skills. Download Our Practice Excel File Similar Articles Productive Geek Tips Magnify Selected Cells In Excel 2007Share Access Data with Excel in Office 2010Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

  Read the article

• CodePlex Daily Summary for Tuesday, March 16, 2010

  CodePlex Daily Summary for Tuesday, March 16, 2010New ProjectsAAPL-MySQL (a MySql implementation of the Agile ADO.Net Persistence Layer): Using the code conventions and code of the Agile ADO.Net Persistence Layer to build a MySql implementationAddress Book: Address Book is simple and easy to use application for storing and editing contacts. It has many features like search and grouping. It's developed ...Airplanes: Airplanes GameAJAX Fax document viewer: The AJAX Fax document viewer is an ASP.net 4.0 project which uses a Seadragon control to display Tiff/Tif files inside the browser. Since it's base...AxeFrog Core: This project contains the foundational code used in several other projects.Bolão: O objetivo deste projeto é estimular a troca de informações e experiências sobre arquitetura e desenvolvimento de software na prática, através do d...Caramel Engine: This is designed to be a logic engine for developing a wide variety of games. To include card logic, dice logic, territories, players, and even man...DotNetNuke® Skin BrandWorks: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by M Perakakis & M Siganou (e-bilab). A very minimal look sk...DotNetNuke® Skin Reasonable: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...File Eraser: File Eraser make it esasier for IT Administrator or Advanced Users to administer files and eliminate long addresses, even UNC. It's developed in VB...GreenEyes: My project for IT personalHulu Launcher: Hulu Launcher is a simple Windows Media Center add-in that attempts to launch Hulu Desktop and manage the windows as seamlessly as possible.Imenik: Imenik makes it easier for users to organise their contacts!KharaPOS: KharaPOS is an Exemplar application for Silverlight 4, WCF RIA Services and .NET Framework 4.Mantas Cryptography: Pequena biblioteca de criptografia com suporte aos algorítmos DES, RC2, Rexor e TripleDES. Gera hashes HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA (SHA1, S...MapWindow3D: A C# DirectX library that extends the MapWindow 6.0 geospatial software library by adding an external map. The map supports rotation and tilting i...Microsoft Silverlight Analytics Framework: Extensible Web Analytics Framework for Microsoft Silverlight Applications.Moq Examples: Unit tests demonstrating Moq features.Ncqrs: Framework that helps you to create Command-Query Responsibility Segregation based applications easily.NoLedge - Notetaking and knowledge database: NoLedge is an easy knowledge gathering and notetaking freeware with a simple interface. You can link a note with different titles and can retrieve ...Numina Application Framework: The framework is a set of tools that help facilitate authentication, authorization, and access control. It is much more than a SSO. It is a central...OData SDK for PHP: OData SDK for PHP is a library to facilitate the connection with OData Services.patterns & practices - Windows Azure Guidance: p&p site for Windows Azure related guidance.projecteuler.net: Exploring projecteuler.net using F#ResumeTracker: Small and easy to use tool that helps to track your job applications. To report bugs or for suggestions please email kirunchik@gmail.com.Selection Maker: Have you ever create a collection of music files? Imagine you just want to pick best of them by your choice. you should go to several folder,play...ShureValidation: Multilingual model validation library. Supports fluent validations, attribute validations and own custom validations.Simple Phonebook: Simple phonebook allows you to store contacts. It also allows you to export the contacts to .txt or .csv. This application is written in C#, but it...SoftUpd: A usefull library which provides an Update feature to any .Net software.sTASKedit: This program can modify and export Perfect World tasks.data files...Tigie: Tigie is a simple CMS system for basic website. It's simple, easy to customize. you'll have a very basic cms to start with and expand for it. All c...toapp: ap hwUltiLogger: UltiLogger is a fast, lightweight logging library programmed in C#. It is meant as a fast, easy, and efficient way for developers to access a relia...Unnme: UnnmeVisual Studio 2008 NUnit snippets: A simple set of useful NUnit snippets, for Visual studio 2008.webdama: italian checkers game c#XBrowser - Headless Browser for .Net: XBrowser is a "headless" web browser written for .Net applications using C#. It is designed to allow automated, remote controlled and test-based br...XML Integrator: XML integration, collaborative toolNew ReleasesAddress Book: Address Book: Address BookAddress Book: Address Book - Source: Address Book source code.AJAX Fax document viewer: AJAXTiff_Source 1.0: Source project for the AJAX Tiff viewer v1.0. Written in Visual Studio 2010 RC using ASP.net 4.0ASP.Net Routing Configuration: mal.Web.Routing v1.0.0.0: mal.Web.Routing v1.0.0.0ASP.NET Wiki Control: Release 1.0: Includes VS2010 Solution and Project files but targets the 3.5 framework so can still be used with VS2008 if new project files are created.BingPaper: Beta: BingPaper Beta Release This Beta release contains quite a few improvements: This Beta release contains a complate overhaul of the replacement tok...Bolão: teste: testeDotNetNuke® Skin Reasonable: Reasonable Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: Seasons Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...dylan.NET: dylan.NET v. 9.2: In TFS Serverdylan.NET Apps: dylan.NET Apps v. 1.1: First version of dnu.dll together with v.9.2 of dylan.NETFamily Tree Analyzer: Version 1.1.0.0: Version 1.1.0.0 Census report now shows in bold those individuals you KNOW to be alive at the date of the census. Direct Ancestors on census repor...GLB Virtual Player Builder: 0.4.1: Minor change to reset non-major/minor attr to 8.Hulu Launcher: HuluLauncher Release 1.0.1.1: HuluLauncher Release 1.0.1.1 is the initial, barely-tested release of this Windows Media Center add-in. It should work in Vista Media Center and 7 ...Imenik: Imenik: Imenik is now available!jQuery Library for SharePoint Web Services: SPServices 0.5.3: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend usi...KeelKit: KeelKit 1.0.3800: 更新内容如下: 优化了DBHelper的一些机制 修正一些BUG 支持Mysql PHP代理，使得能通过Web代理的方式远程访问数据库服务器 添加Model实例化方法，支持所有非自动计算字段的参数实例化、支持所有非空字段实例化 添加Model中的常量，使用这些常量可以获得表名称。 添加了自...Managed Extensibility Framework (MEF) Contrib: MefContrib 0.9.0.0: Updated to MEF Preview 9 Moved MefContrib.Extensions.Generics to MefContrib.Hosting.Generics Moved MefContrib.Extensions.Generics.Tests to MefC...MooiNooi MVC2LINQ2SQL Web Databinder: MooiNooi MVC2LINQ2SQL Web Databinder v0.1.1: Repaired a problem with collections... only index number under 10 were allowed... Please send me your comments and rate the project. Sorry.Mouse Gestures for .NET: Mouse Gestures 1.0: Improved version of the component + sample application. Version 1.0 is not backward compatible.MoviesForMyBlog: MoviesForMyBlog V1.0: This is version 1.0Nito.KitchenSink: Version 1: The first release of Nito.KitchenSink, which uses Nito.Linq 0.1. Please report any issues via the Issue Tracker.Nito.LINQ: Beta (v0.1): This is the first official public release of Nito.Linq. This release only supports .NET 3.5 SP1 with the Microsoft Rx libraries. The documentation...Nito.LINQ: Beta (v0.2): Added ListSource.Generate overloads that take a delegate for counting the list elements.OData SDK for PHP: OData SDK for PHP: This is an updated version of the ADO.NET Data Services toolkit for PHP. It includes full support for OData Protocol V2.0 specification, better pro...Orchard Project: Orchard Latest Build (0.1.2010.0312): This is a technical preview release of Orchard. Our intent with this release is to demonstrate representative experiences for our audiences (end-us...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Enterp...patterns & practices - Unity: Unity 2.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Unity ...patterns & practices - Windows Azure Guidance: Code drop - 1: This initial version is the before the cloud baseline application, so you won’t find anything related to Windows Azure here. Next iteration, we'l...Rawr: Rawr 2.3.12: - First, a note about Rawr3. Rawr3 has been in development for quite a while now, and we know that everyone's eager to get it. It's been held back ...ResumeTracker: Resume Tracker v1.0: First release.Selection Maker: Selection Maker 1.0: This is just the first release of this programSevenZipSharp: SevenZipSharp 0.61: Added: Windows Mobile support bool Check() method for Extractor to test archives integrity FileExtractionFinished now returns FileInfoEventArgs...Silverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.1: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Silverlight Flow Layouts library: SL and WPF Flow Layouts library March 2010: This release indtroduces some bug fixes, performance improvements, Silverlight 4 RC and WPF 4.0 RC support. Flow Layouts Library is a control libra...Simple Phonebook: SimplePhonebook Visual Studio 2010 Solution: Ovo je cijeli projekt u kojem se nalaze svi source fileovi koje sam koristio u izradi ove aplikacije. Za pokretanje je potreban Visual Studio 2010....Simple Phonebook: SimplePhonebook.rar: U ovoj .rar datoteci nalaze se izvršni fileovi. _ In this .rar file you can find .exe file needed for executing the application.SLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit 1.0.1.0: Updated to Silverlight 4 Release Candidate. Introduces the new GenericMarkerDetector which uses the IXrgbReader interface. See the Marker Detecto...sPWadmin: pwAdmin v1.0: Fixed: Templates can now be saved server restart persistant (wait at least 60 seconds between saving and restarting)SQL Director for Dependencies & Indexes: SDD CTP 1.0: SQL Director for Dependencies allows you to view dependencies between tables, views, function, stored procedures and jobs. Newest Testing build, f...SqlCeViewer: SeasonStar Database Management 0.7.0.2: Update the user interface to help user understand clearly how to use .UltiLogger: Initial alpha release: Important! This is not a feature-complete release! It contains the logging priorities, and an interface for building logging systems from. THERE IS...Visual Studio 2008 NUnit snippets: Version 1.0: First stable release.Zeta Resource Editor: Source Code Release 2010-03-16: New source code. Binary setup is also available.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterOData SDK for PHPRawrN2 CMSpatterns & practices – Enterprise LibraryDirectQBlogEngine.NETMapWindow6SharePoint Team-MailerNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148  | Next Page >