Search Results

Search found 4100 results on 164 pages for 'recommend'.

Page 145/164 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• BizTalk Server 2009 - Architecture Options

  - by StuartBrierley

  I recently needed to put forward a proposal for a BizTalk 2009 implementation and as a part of this needed to describe some of the basic architecture options available for consideration.  While I already had an idea of the type of environment that I would be looking to recommend, I felt that presenting a range of options while trying to explain some of the strengths and weaknesses of those options was a good place to start.  These outline architecture options should be equally valid for any version of BizTalk Server from 2004, through 2006 and R2, up to 2009.   The following diagram shows a crude representation of the common implementation options to consider when designing a BizTalk environment.         Each of these options provides differing levels of resilience in the case of failure or disaster, with the later options also providing more scope for performance tuning and scalability.   Some of the options presented above make use of clustering. Clustering may best be described as a technology that automatically allows one physical server to take over the tasks and responsibilities of another physical server that has failed. Given that all computer hardware and software will eventually fail, the goal of clustering is to ensure that mission-critical applications will have little or no downtime when such a failure occurs. Clustering can also be configured to provide load balancing, which should generally lead to performance gains and increased capacity and throughput.   (A) Single Servers   This option is the most basic BizTalk implementation that should be considered. It involves the deployment of a single BizTalk server in conjunction with a single SQL server. This configuration does not provide for any resilience in the case of the failure of either server. It is however the cheapest and easiest to implement option of those available.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (B) Single BizTalk Server with Clustered SQL Servers   This option uses a single BizTalk server with a cluster of SQL servers. By utilising clustered SQL servers we can ensure that there is some resilience to the implementation in respect of the databases that BizTalk relies on to operate. The clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition. While this option offers improved resilience over option (A) it does still present a potential single point of failure at the BizTalk server.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. You are also unable to take advantage of multiple message boxes, which would allow us to balance the SQL load in the event of any bottlenecks in this area of the implementation. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (C) Clustered BizTalk Servers with Clustered SQL Servers   This option makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in the case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    The use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning any implemented solutions. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling out the solution as future demand requires.   This might be seen as the middle cost option, providing a good level of protection in the case of failure, a decent level of future proofing, but at a higher cost than the single BizTalk server implementations.   (D) Clustered BizTalk Servers with Clustered SQL Servers – with disaster recovery/service continuity   This option is similar to that offered by (C) and makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    As with (C) the use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning the implemented solution. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling the solution out as future demand requires.   In this scenario however, we would be including some form of disaster recovery or service continuity. An example of this would be making use of multiple sites, with the BizTalk server cluster operating across sites to offer resilience in case of the loss of one or more sites. In this scenario there are options available for the SQL implementation depending on the network implementation; making use of either one cluster per site or a single SQL cluster across the network. A multi-site SQL implementation would require some form of data replication across the sites involved.   This is obviously an expensive and complex option, but does provide an extraordinary amount of protection in the case of failure.

  Read the article

• Top 10 Tips & Tricks for Oracle SQL Developer

  - by thatjeffsmith

  Being a short week due to the holiday, and with everyone enjoying their Summer vacations (apologies Southern Hemispherians), I reckoned it was a great time to do one of those lazy recap-Top 10-Reader’s Digest type posts. I’ve been sharing 1-3 tips or ‘tricks’ a week since I started blogging about SQL Developer, and I have more than enough content to write a book. But since I’m lazy, I’m just going to compile a list of my favorite ‘must know’ tips instead. I always have to leave out a few tips when I do my presentations, so now I can refer back to this list to make sure I’m not forgetting anything. So without further ado… 1. Configure Your Preferences Yes, there are a LOT of options. But you don’t need to worry about all of them just yet. I do recommend you take a quick look at these ones in particular. Whether you’re new to the tool or have been using it for 5 years, don’t overlook these settings! 2. Disable Extensions You Aren’t Using If you’re not using Data Miner, or if you’re not working on a Migration – disable those extensions! SQL Developer will run leaner & meaner, plus the user interface will be a bit more simplified making the tool easier to navigate as well. 3. SQL Recall via Keyboard Access your history via the keyboard! Cycle through your recent SQL statements just using these magic key strokes! Ctrl+Up or Ctrl+Down. 4. Format Your Query Output Directly to CSV, XML, HTML, etc Have the query results pre-formatted in the format of your choice! Too lazy to run the Export wizard for your query result sets? Just add the SQL Developer output hints to your statement and have the output auto-magically formatted to the style of your choice! 5. Drag & Drop Multiple Tables to the Worksheet SQL Developer will auto-join the related objects. You can then toggle over to the Query Builder to toggle off the columns you don’t want to query. I guarantee this tip will save you time if you’re joining 3 or more tables! 6. Drag & Drop Multiple Tables to a Relational Model A pretty picture is worth a few dozen DDL scripts? SQL Developer does data modeling! If you ctrl-drag a table to a model, it will take that table and any related tables and reverse engineer them to a relational model! You can then print it out or export it to HTML, PDF, etc. 7. View Your PL/SQL Execution Output Automatically Function returns a refcursor? Procedure had 3 out parameters? When you run these programs via the Procedure Editor, we automatically capture the output and place them into one or more data grids for you to browse. 8. Disable Automatic Code Insight and Use It On-Demand Code Editor – Completion Insight – Enable Completion Auto-Popup (Keyword being Auto) Some folks really don’t like it when their IDEs or word-processors try to do ‘too much’ for them. Thankfully SQL Developer allows you to either increase the delay before it attempts to auto-complete your text OR to disable the automatic bit. Instead, you can invoke it on-demand. 9. Interactive Debugging – Change Your Variable Values as You Step Through Your PLSQL Watches aren’t just for watching. You can actually interact with your programs and ‘see what happens’ when X = 256 instead of 1. 10. Ditch the Tree View for the Schema Browser There’s nothing wrong with the Connection tree for browsing your database objects. But some folks just can’t seem to get comfortable with it. So, we built them a Schema Browser that uses a drop down control instead for changing up your schema and object types. Already Know This Stuff, Want More? Just check out my SQL Developer resource page, it’s one of the main links on the top of this page. Or if you can’t find something, just drop me a note in the form of a comment on this page and I’ll do my best to find it or write it for you.

  Read the article

• Add Hotmail & Live Email Accounts to Outlook 2010

  - by Matthew Guay

  Microsoft has recently been promoting upcoming updates to their Hotmail service, promising to make it an even better webmail service. But Microsoft’s revamped Outlook 2010 is already here. Here’s how to integrate Hotmail with Outlook. Outlook 2010 works with a wide variety of email accounts, including POP3, IMAP, and Exchange accounts.  The only problem with POP3 and IMAP accounts is that they only sync email, but not your calendar and contacts like Exchange does.  Hotmail, however, lets you sync your email, contacts, and calendar with Outlook with the Hotmail Connector.  This lets you keep all of your PIM data accessible from everywhere.  Let’s look at how we can set this up on our account. Getting Started The easiest way to add Hotmail to Outlook is to first install the Outlook Hotmail Connector (link below).  Make sure Outlook is closed first, and then proceed with the installation as usual. If you enter your Hotmail account into the New Account setup in Outlook before installing the Hotmail Connector, Outlook will prompt you to download the Hotmail Connector.  However, you’ll have to exit Outlook before you can install the Connector, and then will have to re-enter your information when you restart Outlook, so it’s easier to just install it first. Add Your Hotmail Account to Outlook Now you’re ready to add your Hotmail account to Outlook.  If this is the first time you’ve run Outlook 2010, you’ll be greeted with the following screen.  Click Next to proceed with setup. Then select Yes and click Next again. If you’ve already got an email account setup in Outlook, you can add a new account by clicking File and then selecting Add account. Now, enter your Hotmail account information, and click Next. Outlook will search for your account settings and automatically setup your account with the Hotmail connector we previously installed. If you entered your password incorrectly previously, you may see the following popup.  Re-enter your password and click OK, and Outlook will re-verify your settings. Once everything’s finished and setup, you’ll see the following completion screen.  Click Finish to complete the setup and check out your Hotmail in Outlook. Welcome to your Hotmail account in Outlook 2010.  You’ll notice a small notification at the bottom of the window notifying you that you’re connected to Windows Live Hotmail.  Now your email will synchronize with your Hotmail account, and your Outlook calendar and contacts will be synced with your Live calendar and contacts, respectively.  This is the closest you can get to full Exchange without an Exchange account, and in our experience it works great.  In fact, Hotmail Sync seems to work faster than IMAP sync for us. Setup Hotmail With POP3 Access If you need to access your Hotmail email account but don’t want to install the Outlook Connector, then you can add it with POP3 sync.  We recommend going with the Outlook Connector for the best experience, but if you can’t install it (eg. you’re not allowed to install applications on your work PC) then this is a good alternative. To do this, follow our tutorial on setting up a Gmail POP3 account in Outlook. Although the article concentrates on Gmail, the settings are essentially the same. The only thing you’ll want to change is the Incoming and Outgoing mail server. Incoming mail server – pop3.live.com Outgoing mail server – smtp.live.com User name – your Hotmail or Live email address Incoming Server (POP3) – 995 Outgoing Server (SMTP) – 587 Also, check This server requires and encrypted connection Just as in the Gmail example, select TLS for the type of encrypted connection.  Then, on the bottom, make sure to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from your Hotmail account online. Conclusion Even though Hotmail is generally not as popular as Gmail, it works great with Outlook integration.  If you’re a heavy user of Windows Live services, or want to try them out, Outlook Connector is the easiest way to keep your desktop activity synced with the cloud.  If you’re just one of the millions of Hotmail users who want to access their old Hotmail account alongside their other accounts, this method works great for you too. If you’re using Outlook 2003 or 2007, check out our article on using Hotmail from Microsoft Outlook. Links Download Outlook Hotmail Connector 32-bit Download Outlook Hotmail Connector 64-bit – note, only for users of Office 2010 x64 Similar Articles Productive Geek Tips Use Hotmail from Microsoft OutlookHow to add any POP3 Email Account to HotmailHow to Send and Receive Hotmail from Your Gmail AccountAdd Your Gmail To Windows Live MailManage Your Windows Live Account in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Look Inside WebLogic Server Embedded LDAP with an LDAP Explorer

  - by james.bayer

  Today a question came up on our internal WebLogic Server mailing lists about an issue deleting a Group from WebLogic Server.  The group had a special character in the name. The WLS console refused to delete the group with the message a java.net.MalformedURLException and another message saying “Errors must be corrected before proceeding.” as shown below. The group aa:bb is the one with the issue.  Click to enlarge. WebLogic Server includes an embedded LDAP server that can be used for managing users and groups for “reasonably small environments (10,000 or fewer users)”.  For organizations scaling larger or using more high-end features, I recommend looking at one of Oracle’s very popular enterprise directory services products like Oracle Internet Directory or Oracle Directory Server Enterprise Edition.  You can configure multiple authenicators in WebLogic Server so that you can use multiple directories at the same time. I am not sure WebLogic Server supports special characters in group names for the Embedded LDAP server, but in this case both the console and WLST reported the same issue deleting the group with the special character in the name.  Here’s the WLST output: wls:/hotspot_domain/serverConfig/SecurityConfiguration/hotspot_domain/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator> cmo.removeGroup('aa:bb') Traceback (innermost last): File "<console>", line 1, in ? weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090296]invalid URL ldap:///ou=people,ou=myrealm,dc=hotspot_domain??sub?(&(objectclass=person)(wlsMemberOf=cn=aa:bb,ou=groups,ou=myrealm,dc=hotspot_domain)) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.advance(LDAPAtnGroupMembersNameList.java:254) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.<init>(LDAPAtnGroupMembersNameList.java:119) at weblogic.security.providers.authentication.LDAPAtnDelegate.listGroupMembers(LDAPAtnDelegate.java:1392) at weblogic.security.providers.authentication.LDAPAtnDelegate.removeGroup(LDAPAtnDelegate.java:1989) at weblogic.security.providers.authentication.DefaultAuthenticatorImpl.removeGroup(DefaultAuthenticatorImpl.java:242) at weblogic.security.providers.authentication.DefaultAuthenticatorMBeanImpl.removeGroup(DefaultAuthenticatorMBeanImpl.java:407) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:437) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444) at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654) at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427) at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72) at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265) at java.security.AccessController.doPrivileged(Native Method) at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367) at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788) at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146) at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518) at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: java.net.MalformedURLException at netscape.ldap.LDAPUrl.readNextConstruct(LDAPUrl.java:651) at netscape.ldap.LDAPUrl.parseUrl(LDAPUrl.java:277) at netscape.ldap.LDAPUrl.<init>(LDAPUrl.java:114) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.advance(LDAPAtnGroupMembersNameList.java:224) ... 41 more It’s fairly clear that in order to work that the : character needs to be URL encoded to %3A or similar.  But all is not lost, there is another way.  You can configure an LDAP Explorer like JXplorer to WebLogic Server Embedded LDAP and browse/edit the entries. Follow the instructions here, being sure to change the authentication credentials to the Embedded LDAP server to some value you know, as by default they are some unknown value.  You’ll need to reboot the WebLogic Server Admin Server after making this change. Now configure JXplorer to connect as described in the documentation.  I’ve circled the important inputs.  In this example, my domain name is “hotspot_domain” which listens on the localhost listen address and port 7001.  The cn=Admin user name is a constant identifier for the Administrator of the embedded LDAP and that does not change, but you need to know what it is so you can enter it into the tool you use. Once you connect successfully, you can explore the entries and in this case delete the group that is no longer desired.

  Read the article

• Book Review: Oracle ADF Real World Developer’s Guide

  - by Frank Nimphius

  Recently PACKT Publishing published "Oracle ADF Real World Developer’s Guide" by Jobinesh Purushothaman, a product manager in our team. Though already the sixth book dedicated to Oracle ADF, it has a lot of great information in it that none of the previous books covered, making it a safe buy even for those who own the other books published by Oracle Press (McGrwHill) and PACKT Publishing. More than the half of the "Oracle ADF Real World Developer’s Guide" book is dedicated to Oracle ADF Business Components in a depth and clarity that allows you to feel the expertise that Jobinesh gained in this area. If you enjoy Jobinesh blog (http://jobinesh.blogspot.co.uk/) about Oracle ADF, then, no matter what expert you are in Oracle ADF, this book makes you happy as it provides you with detail information you always wished to have. If you are new to Oracle ADF, then this book alone doesn't get you flying, but, if you have some Java background, accelerates your learning big, big, big times. Chapter 1 is an introduction to Oracle ADF and not only explains the layers but also how it compares to plain Java EE solutions (page 13). If you are new to Oracle JDeveloper and ADF, then at the end of this chapter you know how to start JDeveloper and begin your ADF development Chapter 2 starts with what Jobinesh really is good at: ADF Business Components. In this chapter you learn about the architecture ingredients of ADF Business Components: View Objects, View Links, Associations, Entities, Row Sets, Query Collections and Application Modules. This chapter also provides a introduction to ADFBC SDO services, as well as sequence diagrams for what happens when you execute queries or commit updates. Chapter 3 is dedicated to entity objects and  is one of many chapters in this book you will enjoy and never want to miss. Jobinesh explains the artifacts that make up an entity object, how to work with entities and resource bundles, and many advanced topics, including inheritance, change history tracking, custom properties, validation and cursor handling.  Chapter 4 - you guessed it - is all about View objects. Comparable to entities, you learn about the XM files and classes that make a view object, as well as how to define and work with queries. List-of-values, inheritance, polymorphism, bind variables and data filtering are interesting - and important topics that follow. Again the chapter provides helpful sequence diagrams for you to understand what happens internally within a view object. Chapter 5 focuses on advanced view object and entity object topics, like lifecycle callback methods and when you want to override them. This chapter is a good digest of Jobinesh's blog entries (which most ADF developers have in their bookmark list). Really worth reading ! Chapter 6 then is bout Application Modules. Beside of what application modules are, this chapter covers important topics like properties, passivation, activation, application module pooling, how and where to write custom logic. In addition you learn about the AM lifecycle and request sequence. Chapter 7 is about the ADF binding layer. If you are new to Oracle ADF and got lost in the more advanced ADF Business Components chapters, then this chapter is where you get back into the game. In very easy terms, Jobinesh explains what the ADF binding is, how it fits into the JSF request lifecycle and what are the metadata file involved. Chapter 8 then goes into building data bound web user interfaces. In this chapter you get the basics of JavaServer Faces (e.g. managed beans) and learn about the interaction between the JSF UI and the ADF binding layer. Later this chapter provides advanced solutions for working with tree components and list of values. Chapter 9 introduces bounded task flows and ADF controller. This is a chapter you want to read if you are new to ADF of have started. Experts don't find anything new here, which doesn't mean that it is not worth reading it (I for example, enjoyed the controller talk very much) Chapter 10 is an advanced coverage of bounded task flow and talks about contextual events  Chapter 11 is another highlight and explains error handling, trains, transactions and more. I can only recommend you read this chapter. I am aware of many documents that cover exception handling in Oracle ADF (and my Oracle Magazine article for January/February 2013 does the same), but none that covers it in such a great depth. Chapter 12 covers ADF best practices, which is a great round-up of all the tips provided in this book (without Jobinesh to repeat himself). Its all cool stuff that helps you with your ADF projects. In summary, "Oracle ADF Real World Developer’s Guide" by Jobinesh Purushothaman is a great book and addition for all Oracle ADF developers and those who want to become one. Frank

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Help Protect Your Children with the CEOP Enhanced Internet Explorer 8

  - by Asian Angel

  Do you want to make Internet Explorer safer and more helpful for you and family? Then join us as we look at the CEOP (Child Exploitation and Online Protection Centre) enhanced version of Internet Explorer 8. Setting CEOP Up We chose to install the whole CEOP pack in order to have access to complete set of CEOP Tools. The install process will be comprised of two parts…it will begin with CEOP branded windows showing the components being installed… Note: The components can be downloaded separately for those who only want certain CEOP components added to their browser. Then it will move to the traditional Microsoft Internet Explorer 8 install windows. One thing that we did notice is that here you will be told that you will need to restart your computer but in other windows a log off/log on process is mentioned. Just to make certain that everything goes smoothly we recommend restarting your computer when the installation process is complete. In the EULA section you can see the versions of Windows that the CEOP Pack works with. Once you get past the traditional Microsoft install windows you will be dropped back into the CEOP branded windows. CEOP in Action After you have restarted your computer and opened Internet Explorer you will notice that your homepage has been changed. When it comes to your children that is not a bad thing in this instance. It will also give you an opportunity to look through the CEOP online resources. For the moment you may be wondering where everything is but do not worry. First you can find the two new search providers in the drop-down menu for your “Search Bar” and select a new default if desired. The second thing to look for are the new links that have been added to your “Favorites Menu”. These links can definitely be helpful for you and your family. The third part will require your “Favorites Bar” to be visible in order to see the “Click CEOP Button”. If you have not previously done so you will need to turn on subscribing for “Web Slices”. Click on “Yes” to finish the subscription process. Clicking on the “CEOP Button” again will show all kinds of new links to help provide information for you and your children. Notice that the top part is broken down into “topic categories” while the bottom part is set up for “age brackets”…very nice for helping you focus on the information that you want and/or need. Looking for information and help on a particular topic? Clicking on the “Cyberbullying Link” for example will open the following webpage with information about cyberbullying and a link to get help with the problem. Need something that is focused on your child’s age group? Clicking on the “8-10? Link” as an example opened this page. Want information that is focused on you? The “Parent? Link” leads to this page. The “topic categories & age brackets” make the CEOP Button a very helpful and “family friendly” addition to Internet Explorer. Perhaps you (or your child) want to conduct a search for something that is affecting your child. As you type in a “search term” both of the search providers will provide helpful suggestions for dealing with the problem. We felt that these were very nice suggestions in both instances here… Conclusion We have been able to give you a good peek at what the CEOP Tools can do but the best way to see how helpful it can be for you and your family is try it for yourself. Your children’s safety and happiness is worth it. Links Download the Internet Explorer CEOP Pack (link at bottom of webpage) Note: If you are interested in a singular component or only some use these links. Download the Click CEOP Button Download Search CEOP Download Internet Safety and Security Search Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPWhen to Use Protect Tab vs Lock Tab in FirefoxMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

• Review of Samsung Focus Windows Phone 7

  - by mbcrump

  I recently acquired a Samsung Focus Windows Phone 7 device from AT&T and wanted to share what I thought of it as an end-user. Before I get started, here are several of my write-ups for the Windows Phone 7. You may want to check out the second article titled: Hands-on WP7 Review of Prototype Hardware. From start to finish with the final version of Visual Studio Tools for Windows Phone 7 Hands-on : Windows Phone 7 Review on Prototype Hardware. Deploying your Windows Phone 7 Application to the actual hardware. Profile your Windows Phone 7 Application for Free Submitting a Windows Phone 7 Application to the Market. Samsung Focus i917 Phone Size: Perfect! I have been carrying around a Dell Streak (Android) and it is about half the size. It is really nice to have a phone that fits in your pocket without a lot of extra bulk. I bought a case for the Focus and it is still a perfect size.  The phone just feels right. Screen: It has a beautiful Super AMOLED 480x800 screen. I only wish it supported a higher resolution. The colors are beautiful especially in an Xbox Live Game.   3G: I use AT&T and I've had spotty reception. This really can't be blamed on the phone as much as the actual carrier. Battery: I've had excellent battery life compared to my iPhone and Android devices. I usually use my phone throughout the day on and off and still have a charge at the end of the day.  Camera/Video: I'm still looking for the option to send the video to YouTube or the Image to Twitter. The images look good, but the phone needs a forward facing camera. I like the iPhone/Android (Dell Streak) camera better. Built-in Speaker: Sounds great. It’s not a wimpy speaker that you cannot hear.  CPU: Very smooth transitioning from one screen to another. The prototype Windows Phone 7 that I had, was no where near as smooth. (It was also running a slower processor though). OS: I actually like the OS but a few things could be better. CONS: Copy and Paste (Supposed to come in the next update) We need more apps (Pandora missing was a big one for me and Slacker’s advertisement sucks!). As time passes, and more developers get on board then this will be fixed. The browser needs some major work. I have tried to make cross-platform (WP7, Android, iPhone and iPad) web apps and the browser that ships with WP7 just can’t handle it.  Apps need to be organized better. Instead of throw them all on one screen, it would help to allow the user to create categories. PROS: Hands down the best gaming experience on a phone. I have all three major phones (iphone, android and wp7). Nothing compares to the gaming experience on the WP7. The phone just works. I’ve had a LOT of glitches with my Android device. I’ve had maybe 2 with my WP7 device. Exchange and Office support are great. Nice integration with Twitter/Facebook and social media. Easy to navigate and find the information you need on one screen. Let’s look at a few pictures and we will wrap up with my final thoughts on the phone. WP7 Home Screen. Back of the phone is as stylish. It is hard to see due to the shadow but it is a very thin phone. What’s included? Manuals Ear buds Data Cable plus Power Adapter Phone Click a picture to enlarge So, what are my final thoughts on the Phone/OS? I love the Samsung Focus and would recommend it to anyone looking for a WP7 device. Like any first generation product, you need to give it a little while to mature. Right now the phone is missing several features that we are all used to using. That doesn’t mean a year from now it will be in the same situation. (I sure hope we won’t). If you are looking to get into mobile development, I believe WP7 is the easiest platform to develop from. This is especially true if you have a background in Silverlight or WPF.    Subscribe to my feed

  Read the article

• BizTalk host throttling &ndash; Singleton pattern and High database size

  - by S.E.R.

  Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/06/30/biztalk-host-throttling-ndash-singleton-pattern-and-high-database-size.aspxI have worked for some days around the singleton pattern (for those unfamiliar with it, read this post by Victor Fehlberg) and have come across a few very interesting posts, among which one dealt with performance issues (here, also by Victor Fehlberg). Simply put: if you have an orchestration which implements the singleton pattern, then performances will continuously decrease as the orchestration receives and consumes messages, and that behavior is more obvious when the orchestration never ends (ie : it keeps looping and never terminates or completes). As I experienced the same kind of problem (actually I was alerted by SCOM, which told me that the host was being throttled because of High database size), I thought it would be a good idea to dig a little bit a see what happens deep inside BizTalk and thus understand the reasons for this behavior. NOTE: in this article, I will focus on this High database size throttling condition. I will try and work on the other conditions in some not too distant future… Test conditions The singleton orchestration For the purpose of this study, I have created the following orchestration, which is a very basic implementation of a singleton that piles up incoming messages, then does something else when a certain timeout has been reached without receiving another message: Throttling settings I have two distinct hosts : one that hosts the receive port (basic FILE port) : Ports_ReceiveHostone that hosts the orchestration : ProcessingHost In order to emphasize the throttling mechanism, I have modified the throttling settings for each of these hosts are as follows (all other parameters are set to the default value): [Throttling thresholds] Message count in database: 500 (default value : 50000) Evolution of performance counters when submitting messages Since we are investigating the High database size throttling condition, here are the performance counter that we should take a look at (all of them are in the BizTalk:Message Agent performance object): Database sizeHigh database sizeMessage delivery throttling stateMessage publishing throttling stateMessage delivery delay (ms)Message publishing delay (ms)Message delivery throttling state durationMessage publishing throttling state duration (If you are not used to Perfmon, I strongly recommend that you start using it right now: it is a wonderful tool that allows you to open the hood and see what is going on inside BizTalk – and other systems) Database size It is quite obvious that we will start by watching the database size and high database size counters, just to see when the first reaches the configured threshold (500) and when the second rings the alarm. NOTE : During this test I submitted 600 messages, one message at a time every 10ms to see the evolution of the counters we have previously selected. It might not show very well on this screenshot, but here is what happened: From 15:46:50 to 15:47:50, the database size for the Ports_ReceiveHost host (blue line) kept growing until it reached a maximum of 504.At 15:47:50, the high database size alert fires At first I was surprised by this result: why is it the database size of the receiving host that keeps growing since it is the processing host that piles up messages? Actually, it makes total sense. This counter measures the size of the database queue that is being filled by the host, not consumed. Therefore, the high database size alert is raised on the host that fills the queue: Ports_ReceiveHost. More information is available on the Public MPWiki page. Now, looking at the Message publishing throttling state for the receiving host (green line), we can see that a throttling condition has been reached at 15:47:50: We can also see that the Message publishing delay(ms) (blue line) has begun growing slowly from this point. All of this explains why performances keep decreasing when a singleton keeps processing new messages: the database size grows and when it has exceeded the Message count in database threshold, the host is throttled and the publishing delay keeps increasing. Digging further So, what happens to the database queue then? Is it flushed some day or does it keep growing and growing indefinitely? The real question being: will the host be throttled forever because of this singleton? To answer this question, I set the Message count in database threshold to 20 (this value is very low in order not to wait for too long, otherwise I certainly would have fallen asleep in front of my screen) and I submitted 30 messages. The test was started at 18:26. At 18:56 (ie : exactly 30min later) the throttling was stopped and the database size was divided by 2. 30 min later again, the database size had dropped to almost zero: I guess I’ll have to find some documentation and do some more testing before I sort this out! My guess is that some maintenance job is at work here, though I cannot tell which one Digging even further If we take a look at the Message delivery throttling state counter for the processing host, we can see that this host was also throttled during the submission of the 600 documents: The value for the counter was 1, meaning that Message delivery incoming rate for the host instance exceeds the Message delivery outgoing rate * the specified Rate overdrive factor (percent) value. We will see this another day… :) A last word Let’s end this article with a warning: DO NOT CHANGE THE THROTTLING SETTINGS LIGHTLY! The temptation can be great to just bypass throttling by setting very high values for each parameter (or zero in some cases, which simply disables throttling). Nevertheless, always keep in mind that this mechanism is here for a very good reason: prevent your BizTalk infrastructure from exploding!! So whatever you do with those settings, do a lot of testing and benchmarking!

  Read the article

• Performance considerations for common SQL queries

  - by Jim Giercyk

  Originally posted on: http://geekswithblogs.net/NibblesAndBits/archive/2013/10/16/performance-considerations-for-common-sql-queries.aspxSQL offers many different methods to produce the same results.  There is a never-ending debate between SQL developers as to the “best way” or the “most efficient way” to render a result set.  Sometimes these disputes even come to blows….well, I am a lover, not a fighter, so I decided to collect some data that will prove which way is the best and most efficient.  For the queries below, I downloaded the test database from SQLSkills:  http://www.sqlskills.com/sql-server-resources/sql-server-demos/.  There isn’t a lot of data, but enough to prove my point: dbo.member has 10,000 records, and dbo.payment has 15,554.  Our result set contains 6,706 records. The following queries produce an identical result set; the result set contains aggregate payment information for each member who has made more than 1 payment from the dbo.payment table and the first and last name of the member from the dbo.member table.   /*************/ /* Sub Query  */ /*************/ SELECT  a.[Member Number] ,         m.lastname ,         m.firstname ,         a.[Number Of Payments] ,         a.[Average Payment] ,         a.[Total Paid] FROM    ( SELECT    member_no 'Member Number' ,                     AVG(payment_amt) 'Average Payment' ,                     SUM(payment_amt) 'Total Paid' ,                     COUNT(Payment_No) 'Number Of Payments'           FROM      dbo.payment           GROUP BY  member_no           HAVING    COUNT(Payment_No) > 1         ) a         JOIN dbo.member m ON a.[Member Number] = m.member_no         /***************/ /* Cross Apply  */ /***************/ SELECT  ca.[Member Number] ,         m.lastname ,         m.firstname ,         ca.[Number Of Payments] ,         ca.[Average Payment] ,         ca.[Total Paid] FROM    dbo.member m         CROSS APPLY ( SELECT    member_no 'Member Number' ,                                 AVG(payment_amt) 'Average Payment' ,                                 SUM(payment_amt) 'Total Paid' ,                                 COUNT(Payment_No) 'Number Of Payments'                       FROM      dbo.payment                       WHERE     member_no = m.member_no                       GROUP BY  member_no                       HAVING    COUNT(Payment_No) > 1                     ) ca /********/                    /* CTEs  */ /********/ ; WITH    Payments           AS ( SELECT   member_no 'Member Number' ,                         AVG(payment_amt) 'Average Payment' ,                         SUM(payment_amt) 'Total Paid' ,                         COUNT(Payment_No) 'Number Of Payments'                FROM     dbo.payment                GROUP BY member_no                HAVING   COUNT(Payment_No) > 1              ),         MemberInfo           AS ( SELECT   p.[Member Number] ,                         m.lastname ,                         m.firstname ,                         p.[Number Of Payments] ,                         p.[Average Payment] ,                         p.[Total Paid]                FROM     dbo.member m                         JOIN Payments p ON m.member_no = p.[Member Number]              )     SELECT  *     FROM    MemberInfo /************************/ /* SELECT with Grouping   */ /************************/ SELECT  p.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         COUNT(Payment_No) 'Number Of Payments' ,         AVG(payment_amt) 'Average Payment' ,         SUM(payment_amt) 'Total Paid' FROM    dbo.payment p         JOIN dbo.member m ON m.member_no = p.member_no GROUP BY p.member_no ,         m.lastname ,         m.firstname HAVING  COUNT(Payment_No) > 1   We can see what is going on in SQL’s brain by looking at the execution plan.  The Execution Plan will demonstrate which steps and in what order SQL executes those steps, and what percentage of batch time each query takes.  SO….if I execute all 4 of these queries in a single batch, I will get an idea of the relative time SQL takes to execute them, and how it renders the Execution Plan.  We can settle this once and for all.  Here is what SQL did with these queries:   Not only did the queries take the same amount of time to execute, SQL generated the same Execution Plan for each of them.  Everybody is right…..I guess we can all finally go to lunch together!  But wait a second, I may not be a fighter, but I AM an instigator.     Let’s see how a table variable stacks up.  Here is the code I executed: /********************/ /*  Table Variable  */ /********************/ DECLARE @AggregateTable TABLE     (       member_no INT ,       AveragePayment MONEY ,       TotalPaid MONEY ,       NumberOfPayments MONEY     ) INSERT  @AggregateTable         SELECT  member_no 'Member Number' ,                 AVG(payment_amt) 'Average Payment' ,                 SUM(payment_amt) 'Total Paid' ,                 COUNT(Payment_No) 'Number Of Payments'         FROM    dbo.payment         GROUP BY member_no         HAVING  COUNT(Payment_No) > 1   SELECT  at.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         at.NumberOfPayments 'Number Of Payments' ,         at.AveragePayment 'Average Payment' ,         at.TotalPaid 'Total Paid' FROM    @AggregateTable at         JOIN dbo.member m ON m.member_no = at.member_no In the interest of keeping things in groupings of 4, I removed the last query from the previous batch and added the table variable query.  Here’s what I got:     Since we first insert into the table variable, then we read from it, the Execution Plan renders 2 steps.  BUT, the combination of the 2 steps is only 22% of the batch.  It is actually faster than the other methods even though it is treated as 2 separate queries in the Execution Plan.  The argument I often hear against Table Variables is that SQL only estimates 1 row for the table size in the Execution Plan.  While this is true, the estimate does not come in to play until you read from the table variable.  In this case, the table variable had 6,706 rows, but it still outperformed the other queries.  People argue that table variables should only be used for hash or lookup tables.  The fact is, you have control of what you put IN to the variable, so as long as you keep it within reason, these results suggest that a table variable is a viable alternative to sub-queries. If anyone does volume testing on this theory, I would be interested in the results.  My suspicion is that there is a breaking point where efficiency goes down the tubes immediately, and it would be interesting to see where the threshold is. Coding SQL is a matter of style.  If you’ve been around since they introduced DB2, you were probably taught a little differently than a recent computer science graduate.  If you have a company standard, I strongly recommend you follow it.    If you do not have a standard, generally speaking, there is no right or wrong answer when talking about the efficiency of these types of queries, and certainly no hard-and-fast rule.  Volume and infrastructure will dictate a lot when it comes to performance, so your results may vary in your environment.  Download the database and try it!

  Read the article

• How to Add a Business Card, or vCard (.vcf) File, to a Signature in Outlook 2013 Without Displaying an Image

  - by Lori Kaufman

  Whenever you add a Business Card to your signature in Outlook 2013, the Signature Editor automatically generates a picture of it and includes that in the signature as well as attaching the .vcf file. However, there is a way to leave out the image. To remove the business card image from your signature but maintain the attached .vcf file, you must make a change to the registry. NOTE: Before making changes to the registry, be sure you back it up. We also recommend creating a restore point you can use to restore your system if something goes wrong. Before changing the registry, we must add the Business Card to the signature and save it so a .vcf file of the contact is created in the Signatures folder. To do this, click the File tab. Click Options in the menu list on the left side of the Account Information screen. On the Outlook Options dialog box, click Mail in the list of options on the left side of the dialog box. On the Mail screen, click Signatures in the Compose messages section. For this example, we will create a new signature to include the .vcf file for your business card without the image. Click New below the Select signature to edit box. Enter a name for the new signature, such as Business Card, and click OK. Enter text in the signature editor and format it the way you want or insert a different image or logo. Click Business Card above the signature editor. Select the contact you want to include in the signature on the Insert Business Card dialog box and click OK. Click Save below the Select signature to edit box. This creates a .vcf file for the business card in the Signatures folder. Click on the business card image in the signature and delete it. You should only see your formatted text or other image or logo in the signature editor. Click OK to save your new signature and close the signature editor. Close Outlook as well. Now, we will open the Registry Editor to add a key and value to indicate where to find the .vcf to include in the signature we just created. If you’re running Windows 8, press the Windows Key + X to open the command menu and select Run. You can also press the Windows Key + R to directly access the Run dialog box. NOTE: In Windows 7, select Run from the Start menu. In the Open edit box on the Run dialog box, enter “regedit” (without the quotes) and click OK. If the User Account Control dialog box displays, click Yes to continue. NOTE: You may not see this dialog box, depending on your User Account Control settings. Navigate to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Signatures Make sure the Signatures key is selected. Select New | String Value from the Edit menu. NOTE: You can also right-click in the empty space in the right pane and select New | String Value from the popup menu. Rename the new value to the name of the Signature you created. For this example, we named the value Business Card. Double-click on the new value. In the Value data edit box on the Edit String dialog box, enter the value indicating the location of the .vcf file to include in the signature. The format is: <signature name>_files\<name of .vcf file> For our example, the Value data should be as follows: Business Card_files\Lori Kaufman The name of the .vcf file is generally the contact name. If you’re not sure of what to enter for the Value data for the new key value, you can check the location and name of the .vcf file. To do this, open the Outlook Options dialog box and access the Mail screen as instructed earlier in this article. However, press and hold the Ctrl key while clicking the Signatures button. The Signatures folder opens in Windows Explorer. There should be a folder in the Signatures folder named after the signature you created with “_files” added to the end. For our example, the folder is named Business Card_files. Open this folder. In this folder, you should see a .vcf file with the name of your contact as the name of the file. For our contact, the file is named Lori Kaufman.vcf. The path to the .vcf file should be the name of the folder for the signature (Business Card_files), followed by a “\”, and the name of the .vcf file without the extension (Lori Kaufman). Putting these names together, you get the path that should be entered as the Value data in the new key you created in the Registry Editor. Business Card_files\Lori Kaufman Once you’ve entered the Value data for the new key, select Exit from the File menu to close the Registry Editor. Open Outlook and click New Email on the Home tab. Click Signature in the Include section of the New Mail Message tab and select your new signature from the drop-down menu. NOTE: If you made the new signature the default signature, it will be automatically inserted into the new mail message. The .vcf file is attached to the email message, but the business card image is not included. All you will see in the body of the email message is the text or other image you included in the signature. You can also choose to include an image of your business card in a signature with no .vcf file attached.     

  Read the article

• .NET 3.5 Installation Problems in Windows 8

  - by Rick Strahl

  Windows 8 installs with .NET 4.5. A default installation of Windows 8 doesn't seem to include .NET 3.0 or 3.5, although .NET 2.0 does seem to be available by default (presumably because Windows has app dependencies on that). I ran into some pretty nasty compatibility issues regarding .NET 3.5 which I'll describe in this post. I'll preface this by saying that depending on how you install Windows 8 you may not run into these issues. In fact, it's probably a special case, but one that might be common with developer folks reading my blog. Specifically it's the install order that screwed things up for me -  installing Visual Studio before explicitly installing .NET 3.5 from Windows Features - in particular. If you install Visual Studio 2010 I highly recommend you install .NET 3.5 from Windows features BEFORE you install Visual Studio 2010 and save yourself the trouble I went through. So when I installed Windows 8, and then looked at the Windows Features to install after the fact in the Windows Feature dialog, I thought - .NET 3.5 - who needs it. I'd be happy to not have to install .NET 3.5, but unfortunately I found out quite a while after initial installation that one of my applications/tools (DevExpress's awesome CodeRush) depends on it and won't install without it. Enabling .NET 3.5 in Windows 8 If you want to run .NET 3.5 on Windows 8, don't download an installer - those installers don't work on Windows 8, and you don't need to do this because you can use the Windows Features dialog to enable .NET 3.5: And that *should* do the trick. If you do this before you install other apps that require .NET 3.5 and install a non-SP1 one version of it, you are going to have no problems. Unfortunately for me, even after I've installed the above, when I run the CodeRush installer I still get this lovely dialog: Now I double checked to see if .NET 3.5 is installed - it is, both for 32 bit and 64 bit. I went as far as creating a small .NET Console app and running it to verify that it actually runs. And it does… So naturally I thought the CodeRush installer is a little whacky. After some back and forth Alex Skorkin on Twitter pointed me in the right direction: He asked me to look in the registry for exact info on which version of .NET 3.5 is installed here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP where I found that .NET 3.5 SP1 was installed. This is the 64 bit key which looks all correct. However, when I looked under the 32 bit node I found: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5 Notice that the service pack number is set to 0, rather than 1 (which it was for the 64 bit install), which is what the installer requires. So to summarize: the 64 bit version is installed with SP1, the 32 bit version is not. Uhm, Ok… thanks for that! Easy to fix, you say - just install SP1. Nope, not so easy because the standalone installer doesn't work on Windows 8. I can't get either .NET 3.5 installer or the SP 1 installer to even launch. They simply start and hang (or exit immediately) without messages. I also tried to get Windows to update .NET 3.5 by checking for Windows Updates, which should pick up on the dated version of .NET 3.5 and pull down SP1, but that's also no go. Check for Updates doesn't bring down any updates for me yet. I'm sure at some random point in the future Windows will deem it necessary to update .NET 3.5 to SP1, but at this point it's not letting me coerce it to do it explicitly. How did this happen I'm not sure exactly whether this is the cause and effect, but I suspect the story goes like this: Installed Windows 8 without support for .NET 3.5 Installed Visual Studio 2010 which installs .NET 3.5 (no SP) I now had .NET 3.5 installed but without SP1. I then: Tried to install CodeRush - Error: .NET 3.5 SP1 required Enabled .NET 3.5 in Windows Features I figured enabling the .NET 3.5 Windows Features would do the trick. But still no go. Now I suspect Visual Studio installed the 32 bit version of .NET 3.5 on my machine and Windows Features detected the previous install and didn't reinstall it. This left the 32 bit install at least with no SP1 installed. How to Fix it My final solution was to completely uninstall .NET 3.5 *and* to reboot: Go to Windows Features Uncheck the .NET Framework 3.5 Restart Windows Go to Windows Features Check .NET Framework 3.5 and voila, I now have a proper installation of .NET 3.5. I tried this before but without the reboot step in between which did not work. Make sure you reboot between uninstalling and reinstalling .NET 3.5! More Problems The above fixed me right up, but in looking for a solution it seems that a lot of people are also having problems with .NET 3.5 installing properly from the Windows Features dialog. The problem there is that the feature wasn't properly loading from the installer disks or not downloading the proper components for updates. It turns out you can explicitly install Windows features using the DISM tool in Windows.dism.exe /online /enable-feature /featurename:NetFX3 /Source:f:\sources\sxs You can try this without the /Source flag first - which uses the hidden Windows installer files if you kept those. Otherwise insert the DVD or ISO and point at the path \sources\sxs path where the installer lives. This also gives you a little more information if something does go wrong.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

  - by Lewis Benge

  One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

  Read the article

• How to build Open JavaFX for Android.

  - by PictureCo

  Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business.  SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible  and also that certain APIs are missing comparing to good old java vm from Oracle.  Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation.  Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh  --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you.   Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

  Read the article

• Identity Management Monday at Oracle OpenWorld

  - by Tanu Sood

  What a great start to Oracle OpenWorld! Did you catch Larry Ellison’s keynote last evening? As expected, it was a packed house and the keynote received a tremendous response both from the live audience as well as the online community as evidenced by the frequent spontaneous applause in house and the twitter buzz. Here’s but a sampling of some of the tweets that flowed in: @paulvallee: I freaking love that #oracle has been born again in it's interest in core tech #oow (so good for #pythian) @rwang0: MyPOV: #oracle just leapfrogged the competition on the tech front across the board. All they need is the content delivery network #oow12 @roh1: LJE more astute & engaging this year. Nice announcements this year with 12c the MTDB sounding real good. #oow12 @brooke: Cool to see @larryellison interrupted multiple times by applause from the audience. Great speaker. #OOW And there’s lot more to come this week. Identity Management sessions kick-off today. Here’s a quick preview of what’s in store for you today for Identity Management: CON9405: Trends in Identity Management 10:45 a.m. – 11:45 a.m., Moscone West 3003 Hear directly from subject matter experts from Kaiser Permanente and SuperValu who would share the stage with Amit Jasuja, Senior Vice President, Oracle Identity Management and Security, to discuss how the latest advances in Identity Management that made it in Oracle Identity Management 11g Release 2 are helping customers address emerging requirements for securely enabling cloud, social and mobile environments. CON9492: Simplifying your Identity Management Implementation 3:15 p.m. – 4:15 p.m., Moscone West 3008 Implementation experts from British Telecom, Kaiser Permanente and UPMC participate in a panel to discuss best practices, key strategies and lessons learned based on their own experiences. Attendees will hear first-hand what they can do to streamline and simplify their identity management implementation framework for a quick return-on-investment and maximum efficiency. This session will also explore the architectural simplifications of Oracle Identity Governance 11gR2, focusing on how these enhancements simply deployments. CON9444: Modernized and Complete Access Management 4:45 p.m. – 5:45 p.m., Moscone West 3008 We have come a long way from the days of web single sign-on addressing the core business requirements. Today, as technology and business evolves, organizations are seeking new capabilities like federation, token services, fine grained authorizations, web fraud prevention and strong authentication. This session will explore the emerging requirements for access management, what a complete solution is like, complemented with real-world customer case studies from ETS, Kaiser Permanente and TURKCELL and product demonstrations. HOL10478: Complete Access Management Monday, October 1, 1:45 p.m. – 2:45 p.m., Marriott Marquis - Salon 1/2 And, get your hands on technology today. Register and attend the Hands-On-Lab session that demonstrates Oracle’s complete and scalable access management solution, which includes single sign-on, authorization, federation, and integration with social identity providers. Further, the session shows how to securely extend identity services to mobile applications and devices—all while leveraging a common set of policies and a single instance. Product Demonstrations The latest technology in Identity Management is also being showcased in the Exhibition Hall so do find some time to visit our product demonstrations there. Experts will be at hand to answer any questions. DEMOS LOCATION EXHIBITION HALL HOURS Access Management: Complete and Scalable Access Management Moscone South, Right - S-218 Monday, October 1 9:30 a.m.–6:00 p.m. 9:30 a.m.–10:45 a.m. (Dedicated Hours) Tuesday, October 2 9:45 a.m.–6:00 p.m. 2:15 p.m.–2:45 p.m. (Dedicated Hours) Wednesday, October 3 9:45 a.m.–4:00 p.m. 2:15 p.m.–3:30 p.m. (Dedicated Hours) Access Management: Federating and Leveraging Social Identities Moscone South, Right - S-220 Access Management: Mobile Access Management Moscone South, Right - S-219 Access Management: Real-Time Authorizations Moscone South, Right - S-217 Access Management: Secure SOA and Web Services Security Moscone South, Right - S-223 Identity Governance: Modern Administration and Tooling Moscone South, Right - S-210 Identity Management Monitoring with Oracle Enterprise Manager Moscone South, Right - S-212 Oracle Directory Services Plus: Performant, Cloud-Ready Moscone South, Right - S-222 Oracle Identity Management: Closed-Loop Access Certification Moscone South, Right - S-221 We recommend you keep the Focus on Identity Management document handy. And don’t forget, if you are not on site, you can catch all the keynotes LIVE from the comfort of your desk on YouTube.com/Oracle. Keep the conversation going on @oracleidm. Use #OOW and #IDM and get engaged today. Photo Courtesy: @OracleOpenWorld

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Partition Wise Joins

  - by jean-pierre.dijcks

  Some say they are the holy grail of parallel computing and PWJ is the basis for a shared nothing system and the only join method that is available on a shared nothing system (yes this is oversimplified!). The magic in Oracle is of course that is one of many ways to join data. And yes, this is the old flexibility vs. simplicity discussion all over, so I won't go there... the point is that what you must do in a shared nothing system, you can do in Oracle with the same speed and methods. The Theory A partition wise join is a join between (for simplicity) two tables that are partitioned on the same column with the same partitioning scheme. In shared nothing this is effectively hard partitioning locating data on a specific node / storage combo. In Oracle is is logical partitioning. If you now join the two tables on that partitioned column you can break up the join in smaller joins exactly along the partitions in the data. Since they are partitioned (grouped) into the same buckets, all values required to do the join live in the equivalent bucket on either sides. No need to talk to anyone else, no need to redistribute data to anyone else... in short, the optimal join method for parallel processing of two large data sets. PWJ's in Oracle Since we do not hard partition the data across nodes in Oracle we use the Partitioning option to the database to create the buckets, then set the Degree of Parallelism (or run Auto DOP - see here) and get our PWJs. The main questions always asked are: How many partitions should I create? What should my DOP be? In a shared nothing system the answer is of course, as many partitions as there are nodes which will be your DOP. In Oracle we do want you to look at the workload and concurrency, and once you know that to understand the following rules of thumb. Within Oracle we have more ways of joining of data, so it is important to understand some of the PWJ ideas and what it means if you have an uneven distribution across processes. Assume we have a simple scenario where we partition the data on a hash key resulting in 4 hash partitions (H1 -H4). We have 2 parallel processes that have been tasked with reading these partitions (P1 - P2). The work is evenly divided assuming the partitions are the same size and we can scan this in time t1 as shown below. Now assume that we have changed the system and have a 5th partition but still have our 2 workers P1 and P2. The time it takes is actually 50% more assuming the 5th partition has the same size as the original H1 - H4 partitions. In other words to scan these 5 partitions, the time t2 it takes is not 1/5th more expensive, it is a lot more expensive and some other join plans may now start to look exciting to the optimizer. Just to post the disclaimer, it is not as simple as I state it here, but you get the idea on how much more expensive this plan may now look... Based on this little example there are a few rules of thumb to follow to get the partition wise joins. First, choose a DOP that is a factor of two (2). So always choose something like 2, 4, 8, 16, 32 and so on... Second, choose a number of partitions that is larger or equal to 2* DOP. Third, make sure the number of partitions is divisible through 2 without orphans. This is also known as an even number... Fourth, choose a stable partition count strategy, which is typically hash, which can be a sub partitioning strategy rather than the main strategy (range - hash is a popular one). Fifth, make sure you do this on the join key between the two large tables you want to join (and this should be the obvious one...). Translating this into an example: DOP = 8 (determined based on concurrency or by using Auto DOP with a cap due to concurrency) says that the number of partitions >= 16. Number of hash (sub) partitions = 32, which gives each process four partitions to work on. This number is somewhat arbitrary and depends on your data and system. In this case my main reasoning is that if you get more room on the box you can easily move the DOP for the query to 16 without repartitioning... and of course it makes for no leftovers on the table... And yes, we recommend up-to-date statistics. And before you start complaining, do read this post on a cool way to do stats in 11.

  Read the article

• Independence Day for Software Components &ndash; Loosening Coupling by Reducing Connascence

  - by Brian Schroer

  Today is Independence Day in the USA, which got me thinking about loosely-coupled “independent” software components. I was reminded of a video I bookmarked quite a while ago of Jim Weirich’s “Grand Unified Theory of Software Design” talk at MountainWest RubyConf 2009. I finally watched that video this morning. I highly recommend it. In the video, Jim talks about software connascence. The dictionary definition of connascence (con-NAY-sense) is: 1. The common birth of two or more at the same time 2. That which is born or produced with another. 3. The act of growing together. The brief Wikipedia page about Connascent Software Components says that: Two software components are connascent if a change in one would require the other to be modified in order to maintain the overall correctness of the system. Connascence is a way to characterize and reason about certain types of complexity in software systems. The term was introduced to the software world in Meilir Page-Jones’ 1996 book “What Every Programmer Should Know About Object-Oriented Design”. The middle third of that book is the author’s proposed graphical notation for describing OO designs. UML became the standard about a year later, so a revised version of the book was published in 1999 as “Fundamentals of Object-Oriented Design in UML”. Weirich says that the third part of the book, in which Page-Jones introduces the concept of connascence “is worth the price of the entire book”. (The price of the entire book, by the way, is not much – I just bought a used copy on Amazon for $1.36, so that was a pretty low-risk investment. I’m looking forward to getting the book and learning about connascence from the original source.) Meanwhile, here’s my summary of Weirich’s summary of Page-Jones writings about connascence: The stronger the form of connascence, the more difficult and costly it is to change the elements in the relationship. Some of the connascence types, ordered from weak to strong are: Connascence of Name Connascence of name is when multiple components must agree on the name of an entity. If you change the name of a method or property, then you need to change all references to that method or property. Duh. Connascence of name is unavoidable, assuming your objects are actually used. My main takeaway about connascence of name is that it emphasizes the importance of giving things good names so you don’t need to go changing them later. Connascence of Type Connascence of type is when multiple components must agree on the type of an entity. I assume this is more of a problem for languages without compilers (especially when used in apps without tests). I know it’s an issue with evil JavaScript type coercion. Connascence of Meaning Connascence of meaning is when multiple components must agree on the meaning of particular values, e.g that “1” means normal customer and “2” means preferred customer. The solution to this is to use constants or enums instead of “magic” strings or numbers, which reduces the coupling by changing the connascence form from “meaning” to “name”. Connascence of Position Connascence of positions is when multiple components must agree on the order of values. This refers to methods with multiple parameters, e.g.: eMailer.Send("[email protected]", "[email protected]", "Your order is complete", "Order completion notification"); The more parameters there are, the stronger the connascence of position is between the component and its callers. In the example above, it’s not immediately clear when reading the code which email addresses are sender and receiver, and which of the final two strings are subject vs. body. Connascence of position could be improved to connascence of type by replacing the parameter list with a struct or class. This “introduce parameter object” refactoring might be overkill for a method with 2 parameters, but would definitely be an improvement for a method with 10 parameters. This points out two “rules” of connascence:  The Rule of Degree: The acceptability of connascence is related to the degree of its occurrence. The Rule of Locality: Stronger forms of connascence are more acceptable if the elements involved are closely related. For example, positional arguments in private methods are less problematic than in public methods. Connascence of Algorithm Connascence of algorithm is when multiple components must agree on a particular algorithm. Be DRY – Don’t Repeat Yourself. If you have “cloned” code in multiple locations, refactor it into a common function.   Those are the “static” forms of connascence. There are also “dynamic” forms, including… Connascence of Execution Connascence of execution is when the order of execution of multiple components is important. Consumers of your class shouldn’t have to know that they have to call an .Initialize method before it’s safe to call a .DoSomething method. Connascence of Timing Connascence of timing is when the timing of the execution of multiple components is important. I’ll have to read up on this one when I get the book, but assume it’s largely about threading. Connascence of Identity Connascence of identity is when multiple components must reference the entity. The example Weirich gives is when you have two instances of the “Bob” Employee class and you call the .RaiseSalary method on one and then the .Pay method on the other does the payment use the updated salary?   Again, this is my summary of a summary, so please be forgiving if I misunderstood anything. Once I get/read the book, I’ll make corrections if necessary and share any other useful information I might learn.   See Also: Gregory Brown: Ruby Best Practices Issue #24: Connascence as a Software Design Metric (That link is failing at the time I write this, so I had to go to the Google cache of the page.)

  Read the article

• Oracle Enterprise Manager Cloud Control 12c: Contributing to emerging Cloud standards

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Contributed by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups . As one would expect of an industry leader, Oracle's participation in industry standards bodies is extensive. We participate in dozens of organizations that produce open standards which apply to our products, and our commitment to the success of these organizations is manifest in several way - we support them financially through our memberships; our senior engineers are active participants, often serving in leadership positions on boards, technical working groups and committees; and when it makes good business sense we contribute our intellectual property. We believe supporting the development of open standards is fundamental to Oracle meeting customer demands for product choice, seamless interoperability, and lowering the cost of ownership. Nowhere is this truer than in the area of cloud standards, and for the most recent release of our flagship management product, Oracle Enterprise Manager Cloud Control 12c (EM Cloud Control 12c). There is a fundamental rule that standards follow architecture. This was true of distributed computing, it was true of service-oriented architecture (SOA), and it's true of cloud. If you are familiar with Enterprise Manager it is likely to be no surprise that EM Cloud Control 12c is a source of technology that can be considered for adoption within cloud management standards. The reason, quite simply, is that the Oracle integrated stack architecture aligns with the cloud architecture models being adopted by the industry, and EM Cloud Control 12c has been developed to manage this architecture. EM Cloud Control 12c has facilities for managing the various underlying capabilities of the integrated stack in IaaS, PaaS, and SaaS clouds, and enables essential characteristics such as on-demand self-service provisioning, centralized policy-based resource management, integrated chargeback, and capacity planning, and complete visibility of the physical and virtual environment from applications to disk. Our most recent contribution in support of cloud management standards to come out of the EM Cloud Control 12c work was the Oracle Cloud Elemental Resource Model API. Oracle contributed the Elemental Resource Model API to the Distributed Management Task Force (DMTF) in 2011 where it was assigned to DMTF's Cloud Management Working Group (CMWG). The CMWG is considering the Oracle specification and those of several other vendors in their effort to produce a best practices specification for managing IaaS clouds. DMTF's Cloud Infrastructure Management Interface specification, called CIMI for short, is currently out for public review and expected to be released by DMTF later this year. We are proud to be playing an important role in the development of what is expected to become a major cloud standard. You can find more information on DMTF CIMI at http://dmtf.org/standards/cloud. You can find the work-in-progress release of CIMI at http://dmtf.org/content/cimi-work-progress-specifications-now-available-public-comment . The Oracle Cloud API specification is available on the Oracle Technology Network. You can find more information about the Oracle Cloud Elemental Resource Model API on the Oracle Technical Network (OTN), including a webcast featuring the API engineering manager Jack Yu (see TechCast Live: Inside the Oracle Cloud Resource Model API). If you have not seen this video we recommend you take the time to view it. Simply hover your cursor over the webcast title and control+click to follow the embedded link. If you have a question about the Oracle Cloud API or want to learn more about Oracle's participation in cloud management standards efforts drop us a line. We'd love to hear from you. The Enterprise Manager Standards Blogs are written by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups. They can be reached at Tony.DiCenzo at Oracle.com and Mark.Carlson at Oracle.com respectively. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Unit testing is… well, flawed.

  - by Dewald Galjaard

  Hey someone had to say it. I clearly recall my first IT job. I was appointed Systems Co-coordinator for a leading South African retailer at store level. Don’t get me wrong, there is absolutely nothing wrong with an honest day’s labor and in fact I highly recommend it, however I’m obliged to refer to the designation cautiously; in reality all I had to do was monitor in-store prices and two UNIX front line controllers. If anything went wrong – I only had to phone it in… Luckily that wasn’t all I did. My duties extended to some other interesting annual occurrence – stock take. Despite a bit more curious affair, it was still a tedious process that took weeks of preparation and several nights to complete.  Then also I remember that no matter how elaborate our planning was, the entire exercise would be rendered useless if we couldn’t get the basics right – that being the act of counting. Sounds simple right? We’ll with a store which could potentially carry over tens of thousands of different items… we’ll let’s just say I believe that’s when I first became a coffee addict. In those days the act of counting stock was a very humble process. Nothing like we have today. A staff member would be assigned a bin or shelve filled with items he or she had to sort then count. Thereafter they had to record their findings on a complementary piece of paper. Every night I would manage several teams. Each team was divided into two groups - counters and auditors. Both groups had the same task, only auditors followed shortly on the heels of the counters, recounting stock levels, making sure the original count correspond to their findings. It was a simple yet hugely responsible orchestration of people and thankfully there was one fundamental and golden rule I could always abide by to ensure things run smoothly – No-one was allowed to audit their own work. Nope, not even on nights when I didn’t have enough staff available. This meant I too at times had to get up there and get counting, or have the audit stand over until the next evening. The reason for this was obvious - late at night and with so much to do we were prone to make some mistakes, then on the recount, without a fresh set of eyes, you were likely to repeat the offence. Now years later this rule or guideline still holds true as we develop software (as far removed as software development from counting stock may be). For some reason it is a fundamental guideline we’re simply ignorant of. We write our code, we write our tests and thus commit the same horrendous offence. Yes, the procedure of writing unit tests as practiced in most development houses today – is flawed. Most if not all of the tests we write today exercise application logic – our logic. They are based on the way we believe an application or method should/may/will behave or function. As we write our tests, our unit tests mirror our best understanding of the inner workings of our application code. Unfortunately these tests will therefore also include (or be unaware of) any imperfections and errors on our part. If your logic is flawed as you write your initial code, chances are, without a fresh set of eyes, you will commit the same error second time around too. Not even experience seems to be a suitable solution. It certainly helps to have deeper insight, but is that really the answer we should be looking for? Is that really failsafe? What about code review? Code review is certainly an answer. You could have one developer coding away and another (or team) making sure the logic is sound. The practice however has its obvious drawbacks. Firstly and mainly it is resource intensive and from what I’ve seen in most development houses, given heavy deadlines, this guideline is seldom adhered to. Hardly ever do we have the resources, money or time readily available. So what other options are out there? A quest to find some solution revealed a project by Microsoft Research called PEX. PEX is a framework which creates several test scenarios for each method or class you write, automatically. Think of it as your own personal auditor. Within a few clicks the framework will auto generate several unit tests for a given class or method and save them to a single project. PEX help to audit your work. It lends a fresh set of eyes to any project you’re working on and best of all; it is cost effective and fast. Check them out at http://research.microsoft.com/en-us/projects/pex/ In upcoming posts we’ll dive deeper into how it works and how it can help you.   Certainly there are more similar frameworks out there and I would love to hear from you. Please share your experiences and insights.

  Read the article

• Back Up to Tape the Way You Shop For Groceries

  - by rickramsey

  Imagine if this was how you shopped for groceries: From the end of the aisle sprint to the point where you reach the ketchup. Pull a bottle from the shelf and yell at the top of your lungs, “Got it!” Sprint back to the end of the aisle. Start again and sprint down the same aisle to the mustard, pull a bottle from the shelf and again yell for the whole store to hear, “Got it!” Sprint back to the end of the aisle. Repeat this procedure for every item you need in the aisle. Proceed to the next aisle and follow the same steps for the list of items you need from that aisle. Sounds ridiculous, doesn’t it? Not only is it horribly inefficient, it’s exhausting and can lead to wear out failures on your grocery cart, or worse, yourself. This is essentially how NetApp and some other applications write NDMP backups to tape. In the analogy, the ketchup and mustard are the files to be written, yelling “Got it!” is the equivalent of a sync mark at the end of a file, and the sprint back to the end of an aisle is the process most commonly called a “backhitch” where the drive has to back up on a tape to start writing again. Writing to tape in this way results in very slow tape drive performance and imposes unnecessary wear on the tape drive and the media, especially when writing small files. The good news is not all tape drives behave this way when writing small files. Unlike midrange LTO drives, Oracle’s StorageTek T10000D tape drive is designed to handle this scenario efficiently. The difference between the two drive types is that the T10000D drive gives you the ability to write files in a NetApp NDMP backup environment the way you would normally shop for groceries. With grocery shopping, you essentially stream through aisles picking up items as you go, and then after checking out, yell, “Got it!”, though you might do that last step silently. With the T10000D, it has a feature called the Tape Application Accelerator, which prevents the drive from having to stop after each file is written to notify NetApp or another application that the write was successful. When enabled in the T10000D tape drive, Tape Application Accelerator causes the tape drive to respond to tape mark and file sync commands differently than when disabled: A tape mark received by the tape drive is treated as a buffered tape mark. A file sync received by the tape drive is treated as a no op command. Since buffered tape marks and no op commands do not cause the tape drive to empty the contents of its buffer to tape and backhitch, the data is written to tape in significantly less time. Oracle has emulated NetApp environments with a number of different file sizes and found the following when comparing the T10000D with the Tape Application Accelerator enabled versus LTO6 tape drives. Notice how the T10000D is not only monumentally faster, but also remarkably consistent? In addition, the writing of the 50 GB of files is done without a single backhitch. The LTO6 drive, meanwhile, will perform as many as 3,800 backhitches! At the end of writing the entire set of files, the T10000D tape drive reports back to the application, in this case NetApp, that the write was successful via a tape mark. So if the Tape Application Accelerator dramatically improves performance and reliability, why wouldn’t you always have it enabled? The reason is because tape drive buffers are meant to be just temporary data repositories so in the event of a power loss, there could be data loss in certain environments for the files that resided in the buffer. Fortunately, we do have best practices depending on your environment to avoid this from happening. I highly recommend reading Maximizing Tape Performance with StorageTek T10000 Tape Drives (pdf) to decide which best practice is right for you. The white paper also digs deeper into the benefits of the Tape Application Accelerator. The white paper is free, and after downloading it you can decide for yourself whether you want to yell “Got it!” out loud or just silently to yourself. Customer Advisory Panel One final link: Oracle has started up a Customer Advisory Panel program to collect feedback from customers on their current experiences with Oracle products, as well as desires for future product development. If you would like to participate in the program, go to this link at oracle.com. photo taken on Idaho's Sacajewea Historic Biway by Rick Ramsey - Brian Zents Follow OTN on Blog | Facebook | Twitter | YouTube

  Read the article

• MDX using EXISTING, AGGREGATE, CROSSJOIN and WHERE

  - by James Rogers

  It is a well-published approach to using the EXISTING function to decode AGGREGATE members and nested sub-query filters.  Mosha wrote a good blog on it here and a more recent one here.  The use of EXISTING in these scenarios is very useful and sometimes the only option when dealing with multi-select filters.  However, there are some limitations I have run across when using the EXISTING function against an AGGREGATE member:   The AGGREGATE member must be assigned to the Dimension.Hierarchy being detected by the EXISTING function in the calculated measure. The AGGREGATE member cannot contain a crossjoin from any other dimension or hierarchy or EXISTING will not be able to detect the members in the AGGREGATE member.   Take the following query (from Adventure Works DW 2008):   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members))'    member [Date].[Fiscal Weeks].[CM] as 'AGGREGATE({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]})'   select   {[Week Count]} on columns from   [Adventure Works]     where   [Date].[Fiscal Weeks].[CM]   Here we are attempting to count the existing fiscal weeks in slicer.  This is useful to get a per-week average for another member. Many applications generate queries in this manner (such as Oracle OBIEE).  This query returns the correct result of (4) weeks. Now let's put a twist in it.  What if the querying application submits the query in the following manner:   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members))'    member [Customer].[Customer Geography].[CM] as 'AGGREGATE({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]})'   select   {[Week Count]} on columns from   [Adventure Works]     where   [Customer].[Customer Geography].[CM]   Here we are attempting to count the existing fiscal weeks in slicer.  However, the AGGREGATE member is built on a different dimension (in name) than the one EXISTING is trying to detect.  In this case the query returns (174) which is the total number of [Date].[Fiscal Weeks].[Fiscal Week].members defined in the dimension.   Now another twist, the AGGREGATE member will be named appropriately and contain the hierarchy we are trying to detect with EXISTING but it will be cross-joined with another hierarchy:   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members))'    member [Date].[Fiscal Weeks].[CM] as 'AGGREGATE({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]}*    {[Customer].[Customer Geography].[Country].&[Australia],[Customer].[Customer Geography].[Country].&[United States]})'  select   {[Week Count]} on columns from   [Adventure Works]    where   [Date].[Fiscal Weeks].[CM]   Once again, we are attempting to count the existing fiscal weeks in slicer.  Again, in this case the query returns (174) which is the total number of [Date].[Fiscal Weeks].[Fiscal Week].members defined in the dimension. However, in 2008 R2 this query returns the correct result of 4 and additionally , the following will return the count of existing countries as well (2):   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members))'   member [Country Count] as 'count(existing([Customer].[Customer Geography].[Country].members))'  member [Date].[Fiscal Weeks].[CM] as 'AGGREGATE({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]}*    {[Customer].[Customer Geography].[Country].&[Australia],[Customer].[Customer Geography].[Country].&[United States]})'  select   {[Week Count]} on columns from   [Adventure Works]    where   [Date].[Fiscal Weeks].[CM]   2008 R2 seems to work as long as the AGGREGATE member is on at least one of the hierarchies attempting to be detected (i.e. [Date].[Fiscal Weeks] or [Customer].[Customer Geography]). If not, it seems that the engine cannot find a "point of entry" into the aggregate member and ignores it for calculated members.   One way around this would be to put the sets from the AGGREGATE member explicitly in the WHERE clause (slicer).  I realize this is only supported in SSAS 2005 and 2008.  However, after talking with Chris Webb (his blog is here and I highly recommend following his efforts and musings) it is a far more efficient way to filter/slice a query:   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members))'    select   {[Week Count]} on columns from   [Adventure Works]    where   ({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]}   ,{[Customer].[Customer Geography].[Country].&[Australia],[Customer].[Customer Geography].[Country].&[United States]})   This query returns the correct result of (4) weeks.  Additionally, we can count the cross-join members of the two hierarchies in the slicer:   With   member [Week Count] as 'count(existing([Date].[Fiscal Weeks].[Fiscal Week].members)*existing([Customer].[Customer Geography].[Country].members))'    select   {[Week Count]} on columns from   [Adventure Works]    where   ({[Date].[Fiscal Weeks].[Fiscal Week].&[47]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[48]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[49]&[2004],[Date].[Fiscal Weeks].[Fiscal Week].&[50]&[2004]}   ,{[Customer].[Customer Geography].[Country].&[Australia],[Customer].[Customer Geography].[Country].&[United States]})   We get the correct number of (8) here.

  Read the article

• Task-It Webinar - Source Code

  Last week I presented a webinar called "Building a real-world application with RadControls for Silverlight 4". For those that didn't get to see the webinar, you can view it here: Building a read-world application with RadControls for Silverlight 4 Since the webinar I've received several requests asking if I could post the source code for the simple application I showed demonstrating some of the techniques used in the development of Task-It, such as MVVM, Commands and Internationalization. This source code is now available for downloadhere. After downloading the source: Extract it to the location of your choice on your hard-drive Open the solution Right-click ModuleProject.Web and selecte 'Set as StartUp Project'. Right-click ProjectTestPage.aspx and selected 'Set as Start Page' Create a database in SQL Server called WebinarProject. Navigate to the Database folder under the WebinarProject directory and run the .sql script against your WebinarProject database. The last two steps are necessary only for the Tasks page to work properly (using WCF RIA Services). Now some notes about each page: Code-behind This is not the way I recommend coding a line-of-business application in Silverlight, but simply wanted to show how the code-behind approach would look. Command This page introduces MVVM and Commands. You'll notice in the XAML that the Command property of theRadMenuItem and the Button are both bound to a SaveCommand. That comes from the view model. If you look in the code- behind of the user control you'll see that an instance of a CommandViewModel is instantiated and set as the DataContext of the UserControl.There is also a listener for the view model's SaveCompleted event. When this is fired, it tells the view (UserControl) to display the MessageBox. Internationalization This sample is similar to the previous one, but instead of using hard-coded strings in the UI, the strings are obtained via binding toview model properties. The view model gets the strings from the .resx files (Strings.resx or Strings.de.resx) under Assets/Resources. If you uncomment the call to ShowGerman() in App.xaml.cs's Application_Startup method and re-run the application, you will see the UI in German. Note that this code, which sets the CurrentCulture and CurrentUICulture on the current thread to "de" (German) is for testing purposes only. RadWindow Once again, very similar to the previous example.The difference is that we are now using a RadWindow to display the 'Saved' message instead of a MessageBox. The advantage here is that we do not have to hold on to a reference to the view model in our code behind so that we can get the 'Saved' message from it. The RadWindow's DataContext is now also bound to the view model, so within its XAML we can bind directly to properties in the view model. Much nicer, and cleaner. One other thing I introduced in this example is the use of spacer Rectangles. Rather than setting a width and/or height on the rectangles for spacing, I am now referencing a style in my ResourceDictionary called StandardSpacerStyle. I like doing this better than using margins or padding because now I have a reusable way to create space between elements, the Rectangle does not show (because I have not set its Fill color), and I can change my spacing throughout the user interface in one place if I'd like. Tasks This page is quite a bit different than the other four. It is a very simple, stripped-down version of the Tasks page in the Task-It application. The Tasks.xaml UserControl has a ContentControl, and the Content of that control is set based on whether we are looking at the list of tasks or editing a task. So it displays one of two child UserControls, which are called List and Details. List has the RadGridView, Details has the form. In the code-behind of the Tasks UserControl I am once again setting its DataContext to a view model class. The nice thing is, whichever child UserControl is being displayed (List or Details) inherits its DataContext from its parent control (Tasks), so I do not have to explicitly set it. The List UserControl simply displays a RadGridView whose ItemsSource is bound to a property in the view model called Tasks, and its SelectedItem property is bound to a property in the view model called SelectedItem. The SelectedItem binding must be TwoWay so that the view is notified when the SelectedItem changes in the view model, and the view model is notified when something changes in the view (like when a user changes the Name and/or DueDate in the form). You'll also notice that the form's TextBox and RadDatePicker are also TwoWay bound to the SelectedItem property in the view model. You can experiment with the binding by removing TwoWay and see how changes in the form do not show up in the RadGridView. So here we have an example of two different views (List and Details) that are both bound to the same view model...and actually, so is the Tasks UserControl, so it is really three views. WCF RIA Services By the way, I am using WCF RIA Services to retrieve data for the RadGridView and save the data when the user clicks the Save button in the form. I created a really simple ADO.NET Entity Data Model in WebinarProject.Web called DataModel.edmx. I also created a simple Domain Data Service called DataService that has methods for retrieving data, inserting, updating and deleting. However I am only using the retrieval and update methods in this sample. Note that I do not currently have any validation in place on the form, as I wanted to keep the sample as simple as possible. Wrap up Technically, I should move the calls to WCF RIA Services out of the view model and put them into a separate layer, but this works for now, and that is a topic for another day! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Not so long ago in a city not so far away by Carlos Martin

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is the story of how the EMEA Presales Center turned an Oracle intern into a trusted technology advisor for both Oracle’s Sales and customers. It was the summer of 2011 when I was finishing my Computer Engineering studies as well as my internship at Oracle when I was offered what could possibly be THE dream job for any young European Computer Engineer. Apart from that, it also seemed like the role was particularly tailored to me as I could leverage almost everything I learned at University and during the internship. And all of it in one of the best cities to live in, not only from my home country but arguably from Europe: Malaga! A day at EPC As part of the EPC Technology pillar, and later on completely focused on WebCenter, there was no way to describe a normal day on the job as each day had something unique. Some days I was researching documentation in order to elaborate accurate answers for a customer’s question within a Request for Information or Proposal (RFI/RFP), other days I was doing heavy programming in order to bring a Proof of Concept (PoC) for a customer to life and last not but least, some days I presented to the customer via webconference the demo I built for them the past weeks. So as you can see, the role has research, development and presentation, could you ask for more? Well, don’t worry because there IS more! Internationality As the organization’s name suggests, EMEA Presales Center, it is the Center of Presales within Europe, Middle East and Africa so I got the chance to work with great professionals from all this regions, expanding my network and learning things from one country to apply them to others. In addition to that, the teams based in the Malaga office are comprised of many young professionals hailing mainly from Western and Central European countries (although there are a couple of exceptions!) with very different backgrounds and personalities which guaranteed many laughs and stories during lunch or coffee breaks (or even while working on projects!). Furthermore, having EPC offices in Bucharest and Bangalore and thanks to today’s tele-presence technologies, I was working every day with people from India or Romania as if they were sitting right next to me and the bonding with them got stronger day by day. Career development Apart from the research and self-study I’ve earlier mentioned, one of the EPC’s Key Performance Indicators (KPI) is that 15% of your time is spent on training so you get lots and lots of trainings in order to develop both your technical product knowledge and your presentation, negotiation and other soft skills. Sometimes the training is via webcast, sometimes the trainer comes to the office and sometimes, the best times, you get to travel abroad in order to attend a training, which also helps you to further develop your network by meeting face to face with many people you only know from some email or instant messaging interaction. And as the months go by, your skills improving at a very fast pace, your relevance increasing with each new project you successfully deliver, it’s only a matter of time (and a bit of self-promoting!) that you get the attention of the manager of a more senior team and are offered the opportunity to take a new step in your professional career. For me it took 2 years to move to my current position, Technology Sales Consultant at the Oracle Direct organization. During those 2 years I had built a good relationship with the Oracle Direct Spanish sales and sales managers, who are also based in the Malaga office. I supported their former Sales Consultant in a couple of presentations and demos and were very happy with my overall performance and attitude so even before the position got eventually vacant, I got a heads-up from then in advance that their current Sales Consultant was going to move to a different position. To me it felt like a natural step, same as when I joined EPC, I had at least a 50% of the “homework” already done but wanted to experience that extra 50% to add new product and soft skills to my arsenal. The rest is history, I’ve been in the role for more than half a year as I’m writing this, achieved already some important wins, gained a lot of trust and confidence in front of customers and broadened my view of Oracle’s Fusion Middleware portfolio. I look back at the 2 years I spent in EPC and think: “boy, I’d recommend that experience to absolutely anyone with the slightest interest in IT, there are so many different things you can do as there are different kind of roles you can end up taking thanks to the experience gained at EPC” /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >