Search Results

Search found 87304 results on 3493 pages for 'speech server'.

Page 145/3493 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  Hi, I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• customErrors="RemoteOnly" not working properly in Server 2008

  - by Atomiton

  It would appear that on my brand new Windows Server 2008 with IIS7, customErrors is not working. We have customErrors set to RemoteOnly in the web.config on our Asp.Net sites and applications. However, no matter what we do, it would appear that our sites act like it's set to On and we can't get any detailed messages showing up on our applications when remoted into our servers. I'm not entirely sure how to trace where this is being overrided, or if there is something in the way the server is configured that would make the server think the request is internal? How does this actually resolve correctly, anyway? Any help is appreciated... Our network admin has added domains to our hosts file to direct applications to the IP address.

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• Expired Windows Server 2008 trial remote activation

  - by Garry Harthill

  I have a remote server which has an expired license. I can't currently add the new license because of a licensing server error so I need to reboot the machine. My question is will I be able to remote desktop onto the machine and apply the new license or do I have to be physically at the server. I know an activation wizard usually appears and doesn't let you go any further but does this same wizard appear over remote desktop? I don't really want to reboot the machine only for it to not come up again.

  Read the article

• partition alignment on fresh windows 2003 ent server

  - by Datapimp23

  Hi, I have this server which has it's physical disks in RAID 5 controlled by a 3com raid controller. size of the stripe unit is unknown for the moment (Can check tomorrow in the office). I need to install windows server 2003 ENT and create 2 partitions (OS, Data). I'd like to create the partitions before the installation on windows server. They have to be aligned properly. I have the newest version of gparted on a disc but I have no clue if this is the right tool. Can someone point me in the right direction? Thanks

  Read the article

• windows server 2012 remote desktop - Send messages between standard users

  - by Scott Kramer

  Does anyone know the policy, or registry change, etc. for allowing messages (on the same server) between standard users... an elevated cmd prompt or task manager works of course... but need it to work on standard accounts. H:\>msg scott hi Error sending message to session RDP-Tcp#0 : Error 5 Error [5]:Access is denied. (This is windows server 2012) Also I recall setting something on server 2008 r2, but just can't remember what it was, so it can be done-- Thanks!

  Read the article

• Windows server 2008 can't uninstall FTP

  - by Mr. Flibble

  I'm trying to uninstall the old IIS6 FTP service on Windows Server 2008 so that I can install FTP 7.5. In server manager I clicked remove role services and uninstalled FTP and restarted. The Web Platform Installer 2.0 RC says FTP Service is still installed but it appears uninstalled in server manager. When I try to install FTP7.5 it says that it is incompatible with FTP and that I need to uninstall that first. Is there something else that I need to do to get rid of the old FTP service? Here is a screen shot showing what is installed and the error I'm receiving:

  Read the article

• Windows Server 2008, IIS7 and Windows Authentication

  - by Chalkey

  We currently have a development server set up which we are trying to test some Windows authentication ASP.NET code on. We have turned on Windows Authentication in IIS7 on Windows Server 2008 R2 fine, and it asks the user for a username and password as excepted, but the problem is it doesn't appear to accept any credentials. This code for example... Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Page.Title = "Home page for " + User.Identity.Name End Sub ...always returns an empty string. One theory we have is that we dont have Active Directory installed as of yet, we are just testing this by logging on via the machine name not a domain. Is this type of authentication only applicatable to domains (if so we can probably install Active Directory and some test accounts) - or is it possible to get the user identity when logging in using the machine name? Ideally we would like to be able to test this on our local machines (Windows 7 Pro) using our own accounts (again these aren't on a domain) and IIS but this has the same issue as our dev server. Thanks,

  Read the article

• SQL 2000 Backup/Export Process - Can't find SQL 2000 Enterprise Manager, Can't use Mgmt Studio Expre

  - by 1nsane

  I need to make a backup of a client's SQL 2000 database, however there are a few issues preventing me from doing so using the traditional methods. I've tried using SQL Management Studio Express, but the host doesn't give sufficient privileges to create a backup and I'm getting some strange error messages. I've also tried doing the "Generate Scripts" to recreate the schema, then using the DTS Wizard to migrate the data, but the IDs set up with the identity specification property are not consistent with the live database once copied over. This results in some foreign key breakage... If I remember correctly, I was able to use Microsoft SQL 2000 Enterprise Manager to perform the task before, but I can't find this anywhere... it seems Microsoft has pulled most SQL Server 2000 stuff from their site. Does anyone know where I can find a copy of Enterprise Manager (or a trial of SQL Server 2000, which I believe comes with the component)? Or conversely, does anyone know of any other tools (preferably non-commercial) that are capable of mirroring remote SQL Server 2000 DBs? Thanks!

  Read the article

• MS SQL Server and "No Hard Drive Space Left"

  - by bobber205

  Got a server running a document delivery system on it. The machine is running extremely poorly (Windows XP). I've checked the regular things, like doing a memtest (turned out fine) and trying to degraf the HDD (not needed). The only thing weird about this machine is that its running MSSQL server. And Symantec Anitvirus. (ugh) Sometimes the machine reports "No hard drive space left". I immediately look at the one hard drive at the machine and it still has 20 gigs left. Each and every time. Could MSSQL server cause this? Could this be tied to the machine's terrible performance? Thanks!

  Read the article

• Xeon X5550 vs Six-core Opteron for database server

  - by gregmac

  I'm specing out a database server, and the price works out to be reasonably close between an Intel X5550 Quad-core and an AMD 2425HE (2.1Ghz) Six-core Opteron. I've been looking for some comparisons between the two, but the only thing useful I've found is an AnandTech Review of the 2435 which compares it to Intel Xeons, but concludes they both have their place. My load is MS SQL Server 2008, with an OLTP database that has about an equal amount of reading/writing (and it's a reasonably heavy load). So my question is, what is going to work better in this situation, assuming the drives are the same: Xeon X5550, with 16GB 1333Mhz RAM (Dell R510) or an Opteron 2425HE (2.1Ghz) or 2439SE (2.8Ghz) with 16GB of 800Mhz RAM? (Dell 2970) Note: the 2439 adds $500, but the overall pricing works out that it's not that much more than the R510. Using the 2425HE, the Dell 2970 server is slightly less than the similarly-equipped R510). If it adds a decent amount of performance, it's worthwhile to go faster. (single CPU, in both cases).

  Read the article

• Remote desktop to particular server tries to send print job

  - by Jerry Dodge

  We have a domain network with about 30 computers and an active directory on Windows Server SBS 2003 32bit. Whenever I connect to this server from my Windows 7 Pro 32bit client, it automatically attempts to send some sort of print job. It fails to print however and the printer never seems to receive the job. I have been seeing this happen on every computer which connects to this particular server. It seems to send these print jobs repeatedly, and to different printers, if more than one are installed. As soon as I cancel one print job, it starts another, repeats a few times and finally stops. What could be going on here? PS - I originally thought this was related to MS OneNote but this turns out to happen on computers which do not have OneNote.

  Read the article

• Better antivirus for Windows Server 2008 R2 x64 VPS

  - by raja

  I have only one VPS with Windows Server 2008 R2 x64 and want to buy an Antivirus. I tried NOD32 but they do not give less than 5 users in business edition (I have only one server). Kaspersky may be another solution but whether should i go for Internet Security or Anti-virus? I have few website hosted on this server and user have ability to upload .jpg, .gif, .zip files in few of the folders. Apart from above two any other suggestions on Antivirus that works well on above configuration and available for only one user? Thanks

  Read the article

• Remote Desktop Session Black after Minimize

  - by TorgoGuy

  PROBLEM: When I minimize a remote desktop session and restore it, the remote desktop screen shows up black. This only happens when connecting to a particular computer. DETAILS: If I start clicking around in the black area, portions of the screen will start redrawing and showing up correctly. For example, if I leave a window open in the remote session and click where that window is located on the remote computer, then that window--and only that window--will redraw, and sometimes a portion of that window won't redraw (usually the toolbar). And to clarify--the window only has to be minimized momentarily, so it doesn't seem to be a timeout issue. Clicking or typing in the remote session still causes the remote computer to respond appropriately. Disconnecting from the session and reconnecting restores the whole screen image, as does clicking all over the place in the black image (causing each section to redraw). CONFIGURATION: This problem only happens for me when connecting to a particular computer (a W2K Server box configured to allow remote administration) and only with certain client computers. I've tried 7 different client computers with various versions of Remote Desktop (the OSes were: Win2K, Server 2003, Server 2008, Windows 7 RC, 3 XP) and two of them exhibit the problem (one is one of the XP boxes and the other is Windows 7). Those same computers can RDP to other computers without problem. RESOLUTION ATTEMPTS: I have tried the following: Disable the LOCAL screen saver as mentioned on Technet Turned off bitmap caching in the client, as mentioned on many forums. Updated to version 6.1 of the remote desktop client Using mRemote (I doubted this would work since it uses MS's code for connecting to RDP servers) Turning off all video acceleration. QUESTION: Any ideas on what is causing this?

  Read the article

• SQL Server 2008 Express - "Best" backup solution?

  - by alexn

  What backup solutions would you recommend when using SQL Server 2008 Express? I'm pretty new to SQL Server, but as I'm coming from an MySQL background I thought of setting up replication on another computer and just take Xcopy backups of that server. But unfortunately replication is not available in the Express Edition. The site is heavily accessed, so there has to be no delays and downtime. I'm also thinking of doing a backup twice a day or something. What would you recommend? I have multiple computers I can use, but I don't know if that helps me since I'm using the Express version.

  Read the article

• Git on Windows Server

  - by Chris

  I have my Git repository hosted at github.com. I would like to push updates and such to github.com and then log into my Windows server and do a git pull to get my changes. Is this optimal? It seems like whenever I try to do a git pull on the server, the files seem to get updated somehow since the last pull. And so I am unable to get the update as git says I need to commit my local (Windows server) changes. How can I use git like I want to? Or is there a better way?

  Read the article

• SQL Server 2000 msdb database loading/suspect

  - by Blake Parcell

  My SQL Server recently suffered a raid controller/hard drive crash. After getting my hard drive problem corrected I soon found that some of my databases were (suspect) namely msdb. I am not a DBA by any means however am somewhat familiar with the daily SQL activities that happen on my server. So I restored from backup, and tried to bring my msdb database online. It is now forever stuck in (Loading\Suspect) and I am unable to script backups for my important databases. I can recreate all of the backup plans etc if i can somehow get a working msdb. Any help would be greatly appreciated. I am currently using: Microsoft SQL Server 2000 Version: 8.00.194

  Read the article

• Windows pysical server provisioning question with HPSA 7.8

  - by warren

  I have a physical server that I am trying to provision Windows to. At 58% of the way through copying files form the Core to the target server, the process hangs with either a samba time-out or an error indicating that %path%\system32\ntoskrnl.exe is missing or corrupt. I can build a VM on the same subnet with the same media (merely a different profile to catch the different unattend.txt file) with no issues. I can also provision RHEL5 to this server with no issues. The buildmgr logs indicate that eventually the job is timing-out. Samba logs show that connections are made, and then eventually closed - about the time that the build process times-out. Any ideas on where to look next?

  Read the article

• Managing two domains in one virtual server [on hold]

  - by Buddhika Ariyaratne

  I have a virtual server with Windows Server 2012 on which I need to run two applications for two separate customers. Both applications run on GlassFish in port 8080. The applications run on http://localhost:8080/roseth and http://localhost:8080/ruhunu My virtual server provider has given three IP addresses. How can a I assign one address for each application. For example, if a user type www.ruhunu.org, an arbitrary URL , I want to direct to http://localhost:8080/ruhunu and www.roseth.org to http://localhost:8080/roseth.

  Read the article

• Managing Active Directory Group Membership with a Non-Administrator Account In Server 2008

  - by Laranostz

  I am running Server 2008 R2 in an Active Directory Domain Environment. I have created a group in Active Directory and I have delegated management authority to that group to a user. I want this user to be able to add and remove accounts as needed from that group so that they are exercising some measurement of control without giving them other authority. When I have the user attempt to access the Active Directory Users & Computers Console it prompts them for Administrator credentials. They are using Remote Desktop to access the server, because they do not have Windows 7, and firewall rules prevent using the Remote Management Kit. I do not want to provide them with any level of Administrative rights except the minimum required for them to add/remove users from this group. There are two servers that 'talk' to each other in this isolated environment, a domain controller and a member server, both are only reachable through RDP. Any suggestions?

  Read the article

• Client/server application RPC connection gets disconnected very frequently

  - by Chris Thompson

  I have a client/server application that uses RPC for the client to communicate with the server. Fairly regularly, I get an event in the Application log that the RPC connection was disconnected: Client callback failed ((0x80010108) ) I have the Windows Firewall disabled on both machines. I've even run the client on a second computer with a clean Windows XP install without any group policies. This has been going on for a long time and no one has been able to figure out why it's happening. The same client/server app works fine at other client locations. Any thoughts?

  Read the article

• How to Fix Mail Server SSL?

  - by Noah Goodrich

  Our mail server was originally setup using self-created certificates, however when those expired and I tried to recreate them, the whole thing just blew up. Since I know it will be important, we are running a Debian server and Postfix. Now I see these errors generated in the mail logs: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: cannot get certificate from file /etc/postfix/ssl/smtpd.cert May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:02001002:system library:fopen:No such file or directory:bss_file.c:352:fopen('/etc/postfix/ssl/smtpd.cert','r'): May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:354: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:140DC002:SSL routines:SSL_CTX_use_certificate_chain_file:system lib:ssl_rsa.c:720: May 15 08:06:34 letterpress postfix/smtpd[22901]: cannot load RSA certificate and key data And when trying to access email from a client like Thunderbird from outside our local network, you receive "Unable to connect to smtp server". Update: I have verified that the file does exist. The current owner of the file is root:root. Does this need to be changed?

  Read the article

• How to get my W2003-server (back) into the web (after setting up bridged networking)

  - by MBaas

  I have recently set up Virtualbox on a W2003-Server (which is also used as webserver, accessed from the web). My vbox worked nicely, but then I wanted more, I wanted to have the vm appear in the intranet like any ordinary pc. I was advised to setup bridged networking as opposed to NAT. I did so, and in the server's network connections have bridged the LAN-Connection and the "VirtualBox Host-Only Network" (yes, it says "host only network", but I assure that VBox networking is configured to use network bridge). So now my VM is visible in the intranet and it also has www-accesss, the server can also access the web. The only problem that came up is that the server is no longer accessible from the web. I've traced an HTTP-Request and it says "Can't connect to *:80 (connect: No route to host)". So maybe something in the router's config needs to be adjusted (yeah, well, the server's IP-Address changed from 192.168.1.199 to ...198). So I went into the router-config, reviewed port-forwarding for port 80 and adjusted the IP there, but it still didn't work. Unsure if it was a router-problem or rather something in the server's config, I've setup a "demilitarized zone" in the router and have put the server into it. (My understanding is that this would put the server straight into the web...) But the result of the HTTP-Requests is still the same :(

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >