Search Results

Search found 4174 results on 167 pages for 'tasks'.

Page 145/167 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• Linux: find out what process is using all the RAM?

  - by Timur

  Before actually asking, just to be clear: yes, I know about disk cache, and no, it is not my case :) Sorry, for this preamble :) I'm using CentOS 5. Every application in the system is swapping heavily, and the system is very slow. When I do free -m, here is what I got: total used free shared buffers cached Mem: 3952 3929 22 0 1 18 -/+ buffers/cache: 3909 42 Swap: 16383 46 16337 So, I actually have only 42 Mb to use! As far as I understand, -/+ buffers/cache actually doesn't count the disk cache, so I indeed only have 42 Mb, right? I thought, I might be wrong, so I tried to switch off the disk caching and it had no effect - the picture remained the same. So, I decided to find out who is using all my RAM, and I used top for that. But, apparently, it reports that no process is using my RAM. The only process in my top is MySQL, but it is using 0.1% of RAM and 400Mb of swap. Same picture when I try to run other services or applications - all go in swap, top shows that MEM is not used (0.1% maximum for any process). top - 15:09:00 up 2:09, 2 users, load average: 0.02, 0.16, 0.11 Tasks: 112 total, 1 running, 111 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4046868k total, 4001368k used, 45500k free, 748k buffers Swap: 16777208k total, 68840k used, 16708368k free, 16632k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 3214 ntp 15 0 23412 5044 3916 S 0.0 0.1 0:00.00 17m ntpd 2319 root 5 -10 12648 4460 3184 S 0.0 0.1 0:00.00 8188 iscsid 2168 root RT 0 22120 3692 2848 S 0.0 0.1 0:00.00 17m multipathd 5113 mysql 18 0 474m 2356 856 S 0.0 0.1 0:00.11 472m mysqld 4106 root 34 19 251m 1944 1360 S 0.0 0.0 0:00.11 249m yum-updatesd 4109 root 15 0 90152 1904 1772 S 0.0 0.0 0:00.18 86m sshd 5175 root 15 0 90156 1896 1772 S 0.0 0.0 0:00.02 86m sshd Restart doesn't help, and, by they way is very slow, which I wouldn't normally expect on this machine (4 cores, 4Gb RAM, RAID1). So, with that - I'm pretty sure that this is not a disk cache, who is using the RAM, because normally it should have been reduced and let other processes to use RAM, rather then go to swap. So, finally, the question is - if someone has any ideas how to find out what process is actually using the memory so heavily?

  Read the article

• What else can I do to secure my Linux server?

  - by eric01

  I want to put a web application on my Linux server: I will first explain to you what the web app will do and then I will tell you what I did so far to secure my brand new Linux system. The app will be a classified ads website (like gumtree.co.uk) where users can sell their items, upload images, send to and receive emails from the admin. It will use SSL for some pages. I will need SSH. So far, what I did to secure my stock Ubuntu (latest version) is the following: NOTE: I probably did some things that will prevent the application from doing all its tasks, so please let me know of that. My machine's sole purpose will be hosting the website. (I put numbers as bullet points so you can refer to them more easily) 1) Firewall I installed Uncomplicated Firewall. Deny IN & OUT by default Rules: Allow IN & OUT: HTTP, IMAP, POP3, SMTP, SSH, UDP port 53 (DNS), UDP port 123 (SNTP), SSL, port 443 (the ones I didn't allow were FTP, NFS, Samba, VNC, CUPS) When I install MySQL & Apache, I will open up Port 3306 IN & OUT. 2) Secure the partition in /etc/fstab, I added the following line at the end: tmpfs /dev/shm tmpfs defaults,rw 0 0 Then in console: mount -o remount /dev/shm 3) Secure the kernel In the file /etc/sysctl.conf, there are a few different filters to uncomment. I didn't know which one was relevant to web app hosting. Which one should I activate? They are the following: A) Turn on Source Address Verification in all interfaces to prevent spoofing attacks B) Uncomment the next line to enable packet forwarding for IPv4 C) Uncomment the next line to enable packet forwarding for IPv6 D) Do no accept ICMP redirects (we are not a router) E) Accept ICMP redirects only for gateways listed in our default gateway list F) Do not send ICMP redirects G) Do not accept IP source route packets (we are not a router) H) Log Martian Packets 4) Configure the passwd file Replace "sh" by "false" for all accounts except user account and root. I also did it for the account called sshd. I am not sure whether it will prevent SSH connection (which I want to use) or if it's something else. 5) Configure the shadow file In the console: passwd -l to lock all accounts except user account. 6) Install rkhunter and chkrootkit 7) Install Bum Disabled those services: "High performance mail server", "unreadable (kerneloops)","unreadable (speech-dispatcher)","Restores DNS" (should this one stay on?) 8) Install Apparmor_profiles 9) Install clamav & freshclam (antivirus and update) What did I do wrong and what should I do more to secure this Linux machine? Thanks a lot in advance

  Read the article

• How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

  - by frLich

  I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

  Read the article

• HP ProLiant DL380 G3 Running Windows Server 2000 has crashed between 6-7:30am for the past 5 days

  - by user109717

  I have a HP ProLiant DL380 G3 running Windows Server 2000 that has been crashing everyday between 6-730am. This started when I changed out a failing hard drive 6 days ago. I have looked at the scheduled tasks which does not have anything pertaining to this issue. Below are the only things I see in the system log and some of the dump files. Can this be a hardware issue if this happens at a certain time frame everyday? Any help is greatly appreciated. Thanks The previous system shutdown at 6:07:55 AM on 2/7/2012 was unexpected. System Information Agent: Health: The server is operational again. The server has previously been shutdown by the Automatic Server Recovery (ASR) feature and has just become operational again. [SNMP TRAP: 6025 in CPQHLTH.MIB] BugCheck 7A, {3, c0000005, 3400028, 0} Probably caused by : memory_corruption ( nt!MiMakeSystemAddressValidPfn+42 ) Followup: MachineOwner 0: kd !analyze -v * Bugcheck Analysis * * KERNEL_DATA_INPAGE_ERROR (7a) The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error. Also see KERNEL_STACK_INPAGE_ERROR. If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, it means the disk subsystem has experienced a failure. If the error status is 0xC000009A, then it means the request failed because a filesystem failed to make forward progress. Arguments: Arg1: 00000003, lock type that was held (value 1,2,3, or PTE address) Arg2: c0000005, error status (normally i/o status code) Arg3: 03400028, current process (virtual address for lock type 3, or PTE) Arg4: 00000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) MODULE_NAME: nt IMAGE_NAME: memory_corruption BugCheck A, {0, 2, 1, 804137d6} Probably caused by : ntkrnlmp.exe ( nt!CcGetVirtualAddress+ba ) * Bugcheck Analysis * * IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 804137d6, address which referenced memory MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe

  Read the article

• Need a script/batch/program that runs a command that won't be killed when the parent is killed

  - by billc.cn

  The scenario I use Zabbix to monitor my servers and recently I wanted to add some more metrics for the Windows ones. For security reasons, I used Zabbix's User Parameter feature, but it limits the execution of external commands to about 3 seconds. After that, the command is forcibly killed. I want to run some long run commands, so I used the trick from Zabbix's forum: run the command in the background, write the results to a file and use Zabbix to collect them. This is rather easy under *nix thanks to the "&" operator, but there is no such support in Windows' shell. To make things worse, when Zabbix kills forcibly kill the cmd.exe it used to evaluate the commands, all child processes die including the unfinished background tasks. Thus I need something that can sever all the ties with its children so they won't be affected in the cascading kill. What I've tried start and start /B - They do nothing as the child always die with the parent WScript.Shell.Run as in invis.vbs from StackOverflow - Sometimes work. If the wscript process is forcibly killed as opposed to quitting on its own, the children will die as well. hstart - similar results to invis.vbs At command - This requires you to set an absolution time for the task to run as opposed to an offset, so the code would be quite messy due to the limited shell scripting capability of Windows. (Edit) PsExec.exe from the SysInternals suite - It uses a service to launch the command, so it is not affected by the kill; however, it prints some banner and log info to StdErr and there's no switch to disable this. When I use 2>NUL to redirect them, Zabbix reports an error. After trying the above in different combinations, I noticed if I call hstart from invis.vbs, the command started by the former will be left alone as a parent-less process when invis.vbs is killed. However, since I need to redirect the output, the command I want to run is always in the form of cmd.exe /c ""command" "args"" >log. The vbs also removes all the quotes, so I have to encode the command with self-defined escape sequences. The end result involves about five levels of escaping/quoting, which is almost impossible to maintain. Anyone know any better solutions? Some requirements Any bat/vbs/js/Win32 binary is acceptable Better not require multiple levels of escaping No .Net (including PowerShell) because it is not installed

  Read the article

• How To Switch Back to Outlook 2007 After the 2010 Beta Ends

  - by Matthew Guay

  Are you switching back to Outlook 2007 after trying out Office 2010 beta?  Here’s how you can restore your Outlook data and keep everything working fine after the switch. Whenever you install a newer version of Outlook, it will convert your profile and data files to the latest format.  This makes them work the best in the newer version of Outlook, but may cause problems if you decide to revert to an older version.  If you installed Outlook 2010 beta, it automatically imported and converted your profile from Outlook 2007.  When the beta expires, you will either have to reinstall Office 2007 or purchase a copy of Office 2010. If you choose to reinstall Office 2007, you may notice an error message each time you open Outlook. Outlook will still work fine and all of your data will be saved, but this error message can get annoying.  Here’s how you can create a new profile, import all of your old data, and get rid of this error message. Banish the Error Message with a New Profile To get rid of this error message, we need to create a new Outlook profile.  First, make sure your Outlook data files are backed up.  Your messages, contacts, calendar, and more are stored in a .pst file in your appdata folder.  Enter the following in the address bar of an Explorer window to open your Outlook data folder, and replace username with your user name: C:\Users\username\AppData\Local\Microsoft\Outlook Copy the Outlook Personal Folders (.pst) files that contain your data. Its name is usually your email address, though it may have a different name.  If in doubt, select all of the Outlook Personal Folders files, copy them, and save them in another safe place (such as your Documents folder). Now, let’s remove your old profile.  Open Control Panel, and select Mail.  In Windows Vista or 7, simply enter “Mail” in the search box and select the first entry. Click the “Show Profiles…” button. Now, select your Outlook profile, and click Remove.  This will not delete your data files, but will remove them from Outlook. Press Yes to confirm that you wish to remove this profile. Open Outlook, and you will be asked to create a new profile.  Enter a name for your new profile, and press Ok. Now enter your email account information to setup Outlook as normal. Outlook will attempt to automatically configure your account settings.  This usually works for accounts with popular email systems, but if it fails to find your information you can enter it manually.  Press finish when everything’s done. Outlook will now go ahead and download messages from your email account.  In our test, we used a Gmail account that still had all of our old messages online.  Those files are backed up in our old Outlook data files, so we can save time and not download them.  Click the Send/Receive button on the bottom of the window, and select “Cancel Send/Receive”. Restore Your Old Outlook Data Let’s add our old Outlook file back to Outlook 2007.  Exit Outlook, and then go back to Control Panel, and select Mail as above.  This time, click the Data Files button. Click the Add button on the top left. Select “Office Outlook Personal Folders File (.pst)”, and click Ok. Now, select your old Outlook data file.  It should be in the folder that opens by default; if not, browse to the backup copy we saved earlier, and select it. Press Ok at the next dialog to accept the default settings. Now, select the data file we just imported, and click “Set as Default”. Now, all of your old messages, appointments, contacts, and everything else will be right in Outlook ready for you.  Click Ok, and then open Outlook to see the change. All of the data that was in Outlook 2010 is now ready to use in Outlook 2007.  You won’t have to wait to re-download all of your emails from the server since everything’s still here ready to be used.  And when you open Outlook, you won’t see any error messages, either! Conclusion Migrating your Outlook profile back to Outlook 2007 is fairly easy, and with these steps, you can avoid seeing an error message every time you open Outlook.  With all your data in tact, you’re ready to get back to work instead of getting frustrated with Outlook.  Many of us use webmail and keep all of our messages in the cloud, but even on broadband connections it can take a long time to download several gigabytes of emails. Similar Articles Productive Geek Tips Opening Attachments in Outlook 2007 by KeyboardQuickly Create Appointments from Tasks with Outlook 2007’s To-Do BarFix For Outlook 2007 Constantly Asking for Password on VistaPin Microsoft Outlook to the Desktop BackgroundOur Look at the LinkedIn Social Connector for Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

  Read the article

• SQL SERVER – 2008 – Introduction to Snapshot Database – Restore From Snapshot

  - by pinaldave

  Snapshot database is one of the most interesting concepts that I have used at some places recently. Here is a quick definition of the subject from Book On Line: A Database Snapshot is a read-only, static view of a database (the source database). Multiple snapshots can exist on a source database and can always reside on the same server instance as the database. Each database snapshot is consistent, in terms of transactions, with the source database as of the moment of the snapshot’s creation. A snapshot persists until it is explicitly dropped by the database owner. If you do not know how Snapshot database work, here is a quick note on the subject. However, please refer to the official description on Book-on-Line for accuracy. Snapshot database is a read-only database created from an original database called the “source database”. This database operates at page level. When Snapshot database is created, it is produced on sparse files; in fact, it does not occupy any space (or occupies very little space) in the Operating System. When any data page is modified in the source database, that data page is copied to Snapshot database, making the sparse file size increases. When an unmodified data page is read in the Snapshot database, it actually reads the pages of the original database. In other words, the changes that happen in the source database are reflected in the Snapshot database. Let us see a simple example of Snapshot. In the following exercise, we will do a few operations. Please note that this script is for demo purposes only- there are a few considerations of CPU, DISK I/O and memory, which will be discussed in the future posts. Create Snapshot Delete Data from Original DB Restore Data from Snapshot First, let us create the first Snapshot database and observe the sparse file details. USE master GO -- Create Regular Database CREATE DATABASE RegularDB GO USE RegularDB GO -- Populate Regular Database with Sample Table CREATE TABLE FirstTable (ID INT, Value VARCHAR(10)) INSERT INTO FirstTable VALUES(1, 'First'); INSERT INTO FirstTable VALUES(2, 'Second'); INSERT INTO FirstTable VALUES(3, 'Third'); GO -- Create Snapshot Database CREATE DATABASE SnapshotDB ON (Name ='RegularDB', FileName='c:\SSDB.ss1') AS SNAPSHOT OF RegularDB; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO Now let us see the resultset for the same. Now let us do delete something from the Original DB and check the same details we checked before. -- Delete from Regular Database DELETE FROM RegularDB.dbo.FirstTable; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO When we check the details of sparse file created by Snapshot database, we will find some interesting details. The details of Regular DB remain the same. It clearly shows that when we delete data from Regular/Source DB, it copies the data pages to Snapshot database. This is the reason why the size of the snapshot DB is increased. Now let us take this small exercise to  the next level and restore our deleted data from Snapshot DB to Original Source DB. -- Restore Data from Snapshot Database USE master GO RESTORE DATABASE RegularDB FROM DATABASE_SNAPSHOT = 'SnapshotDB'; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Clean up DROP DATABASE [SnapshotDB]; DROP DATABASE [RegularDB]; GO Now let us check the details of the select statement and we can see that we are successful able to restore the database from Snapshot Database. We can clearly see that this is a very useful feature in case you would encounter a good business that needs it. I would like to request the readers to suggest more details if they are using this feature in their business. Also, let me know if you think it can be potentially used to achieve any tasks. Complete Script of the afore- mentioned operation for easy reference is as follows: USE master GO -- Create Regular Database CREATE DATABASE RegularDB GO USE RegularDB GO -- Populate Regular Database with Sample Table CREATE TABLE FirstTable (ID INT, Value VARCHAR(10)) INSERT INTO FirstTable VALUES(1, 'First'); INSERT INTO FirstTable VALUES(2, 'Second'); INSERT INTO FirstTable VALUES(3, 'Third'); GO -- Create Snapshot Database CREATE DATABASE SnapshotDB ON (Name ='RegularDB', FileName='c:\SSDB.ss1') AS SNAPSHOT OF RegularDB; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Delete from Regular Database DELETE FROM RegularDB.dbo.FirstTable; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Restore Data from Snapshot Database USE master GO RESTORE DATABASE RegularDB FROM DATABASE_SNAPSHOT = 'SnapshotDB'; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Clean up DROP DATABASE [SnapshotDB]; DROP DATABASE [RegularDB]; GO Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

  - by Jason Fitzpatrick

  This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

  Read the article

• Add Background Images and Themes to Windows 7 Media Center

  - by DigitalGeekery

  Are you tired of the same Windows Media Center look and feel? Today we’ll show you how change the background and apply themes to WMC. Changing the Basic Color Scheme in WMC There are a couple of very basic color scheme options built in to Windows 7 Media Center. From the WMC Start Menu, select Settings on the Tasks strip and then select General. On the General settings screen select Visual and Sound Effects.   Under Color scheme you’ll find options for Windows Media Center standard, High contrast white, and High contrast black. Simply select a color scheme and click Save before exiting.   If you have used Media Center before you are familiar with the standard blue default theme. There is also the high contrast white. And, the high contrast black. Changing the Background Image with Media Center Studio Themes and custom backgrounds need to be added with the third-party software, Media Center Studio. You can find the download link at the end of this article. You can use your own high resolution photo, or download one from the Internet. For best results, you’ll want to find an image that meets or exceeds the resolution of your monitor. Also, using a darker colored background image is ideal as it should contrast better with the lighter colored text of the start menu. Once you’ve downloaded and installed Media Center Studio (link below), open the application select the Home tab on the ribbon and make sure you are on the Themes tab below. Click New. Select Biography from the left pane and type in a name for your new theme.   Next, click on the triangle next to Images to expand the list below. You’ll want to browse to Images > Common > Background. You should see a list of PNG image files located below Background. We will want to swap out the COMMON.ANIMATED.BACKGROUND.PNG and the COMMON.BACKGROUND.PNG images. Select COMMON.ANIMATED.BACKGROUND.PNG and click on the Browse button on the right.   Browse for your photo and click Open. Your selected image will appear on the left pane. Now, do the same for the COMMON.BACKGROUND.PNG. When finished, select the Home tab on the ribbon at the top and click Save.   Now switch to the Themes tab on the ribbon and the Themes tab below. (There are two Themes tabs which can be a bit confusing). Select your theme on the right pane and click Apply. Note: You won’t see the image backgrounds displayed. Your theme will be applied to Media Center. Close out of Media Center Studio and open Windows Media Center to check out your new background.   You can load multiple backgrounds images and switch them periodically as your mood changes. You might like to find a nice background featuring your favorite movie or TV show.   Perhaps you can even find a background of your favorite sports team.   Installing Themes with Media Center Studio Theme7MC has made available a small group of Media Center Studio Theme packs that are simple to download and install. You can find the download link below. Note: Before installing a theme, turn off any extenders and close Windows Media Center. Download any (or all) of the Theme7MC theme packages to your Media Center PC. Open Media Center Studio, select the Themes tab (the one at the top) and click Import Theme.   Browse for the theme you wish to import and click Open. Select your theme from the themes pane and click Apply. Media Center Studio will proceed to apply your theme. You should then see your new theme appear under Current theme on the left theme pane. Close out of Media Center Studio. Open Media Center and enjoy your new theme. Conclusion Media Center Studio runs on Windows 7 or Vista and gives users a solution for personalizing their Media Center backgrounds. It is a Beta application, however, so it still has a few bugs. Currently, there are only a handful of themes available at Themes7MC, but what they have is pretty slick. If you’d like to further customize the look of Media Center, check out our previous article on how to customize the Media Center start menu with Media Center Studio. Downloads Media Center Studio Theme7MC Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

  Read the article

• Test Drive Windows 7 Online with Virtual Labs

  - by Matthew Guay

  Did you miss out on the Windows 7 public beta and want to try it out before you actually make the leap and upgrade? Maybe you want to learn how to deploy new features in a business environment. Here’s how you can test drive Windows 7 directly from your browser. Whether you manage 10,000 desktops or simply manage your own laptop, it’s usually best to test out a new OS before installing it.  If you’re upgrading from Windows XP you may find many things unfamiliar.  Microsoft has setup a special Windows 7 Test Drive website with resources to help IT professionals test and deploy Windows 7 in their workplaces.  This is a great resource to try out Windows 7 from the comfort of your browser, and look at some of the new features without even installing it. Please note that the online version is not nearly as responsive as a full standard install of Windows 7.  It also does not run the full Aero interface or desktop effects, and may refresh slowly depending on your Internet connection.  So don’t judge Windows 7’s performance based on this virtual lab, but use it as a way to learn more about Windows 7 without installing it. Getting Started To test drive Windows 7, visit Microsoft’s Windows 7 Test Drive website (link below).  You will need to run the Windows 7 Test Drive in Internet Explorer, as it requires Active X support.  We received this error when attempting to run the Test Drive in Firefox: Now, click the “Take a Test Drive” link on the bottom left of the page. This site includes several test drives to demonstrate different features of Windows 7 and its related ecosystem of products including Windows Server 2008 R2, some of which, including the XP Mode test drive, are not yet ready.  For this test, we selected the MED-V Test drive, as this includes Office 2007 and 2010 so you can test them in Windows 7 as well.  Simply select the test drive you want, and click “Try it now!”   If you haven’t run a Windows test drive before, you will be asked to install an ActiveX control.  Click the link to install. Click the yellow bar at the top of the page in Internet Explorer, and select to Install the add-on.  You may have to approve a UAC prompt to finish the install. Once this is finished, click the link on the bottom of the page to return to your test drive.  The test drive page should automatically refresh; if it doesn’t, click refresh to reload it. Now the test drive will load the components.   Once its fully loaded, click the link to launch Windows 7 in a new window. You may see a prompt warning that the server may have been impersonated.  Simply click Yes to proceed. The test lab will give you some getting started directions; click Close Window when you’re ready to try out Windows 7. Here’s the default desktop in the Windows 7 test drive.  You can use it just like a normal Windows computer, but do note that it may function slowly depending on your internet connection.   This test drive includes both Office 2007 and Office 2010 Tech Preview, so you can try out both in Windows 7 as well. You can try out the new Windows 7 applications such as the reworked Paint with the Ribbon interface from Office. Or you can even test the newest version of Media Center, though it will warn you that it may not function good with the down-scaled graphics in the test drive.   Most importantly, you can try out the new features in Windows 7, such as Jumplists and even Aero Snap.  Once again, these features will not function the quickest, but it does let you test them out. While working with the Virtual Lab, there are different tasks it walks you through. You can also download a copy of the lab manual in PDF format to help you navigate through the various objectives. The test drive system is running Microsoft Forefront Security, the enterprise security solution from which Microsoft Security Essentials has adapted components from. Conclusion These virtual labs are great for tech students, or those of you who want to get a first-hand trial of the new features. Also, if you’re not sure on how to deploy something and want to practice in a virtual environment, these labs are quite valuable.While these labs are geared toward IT professionals, it’s a good way for anyone to try out Windows 7 features from the comfort of your current computer. Test Drive Windows 7 Similar Articles Productive Geek Tips Mount Multiple ISO Images Using Virtual CloneDriveHow To Delete a VHD in Windows 7Keyboard Shortcuts for VMware WorkstationMount an ISO image in Windows 7 or VistaHow To Turn a Physical Computer Into A Virtual Machine with Disk2vhd TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

  Read the article

• 8 Backup Tools Explained for Windows 7 and 8

  - by Chris Hoffman

  Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

  Read the article

• Convert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1

  - by DigitalGeekery

  Today look at MCEBuddy for Windows 7 Media Center. This handy app automatically takes your recorded TV files and converts them to MP4, AVI, WMV, or MPEG format. It even has the option to cut out those annoying commercials during the conversion process. Installation and Configuration Download and extract MCE Buddy. (Download link below) Run the setup.exe file and take all the default settings.   Open MCEBuddy Configuration by going to Start > All Programs > MCEBuddy > MCEBuddy Configuration.   Video Paths The MCEBuddy application is comprised of a single window. The first step you’ll want to take is to define your Source and Destination paths. The “Source” will most likely be your Recorded TV directory. The Destination should NOT be the same as the Source folder. Note: The Recorded TV directory in Windows 7 Media Center will only display and play WTV & DVR-MS files. To watch the converted MP4, AVI, WMV, or MPEG files in Windows Media Center you’ll need to add them to your Video Library or Movie Library. Video Conversion Next, choose your preferred format for conversion from the “Convert to” drop down list. The default is MP4 with the H.264 codec. You’ll find a wide variety of formats. The first set of conversion options in the drop down list will resize the video to 720 pixels wide. The next two sections maintain the original size, and the final section is for a variety of portable devices.   Next, you’ll see a group of check boxes below the “Convert to” drop down list. The Commercial Skipping option will cut the commercials while converting the file. Sort By Series will create a sub-folder in your Destination folder for each TV show. Delete Original will delete the WTV file after conversion is complete. (This option is not recommended unless you are sure your files are converting properly and you no longer need the WTV file.) Start Minimized is ideal if you want to run MCEBuddy on Windows startup. Note: MCEBuddy installs and uses Comskip for commercial cutting by default. However, if you have ShowAnalyzer installed, it will use that application instead. Advanced Options To choose a specific time of day to perform the conversions, click the checkbox under the “Advanced Options,” and select the starting and ending times for conversion. For example, convert between 2 hours and 5 hours would be between 2 am and 5am. If you want MCEBuddy to constantly look for and immediately convert new recordings, leave the box unchecked.   The “Video age” option lets you choose a specific number of days to wait before performing the conversion. This can be useful if you want to watch the recordings first and delete those you don’t wish to convert. You can also choose the “Sub Directories” if you’d like MCEBuddy to convert files that are in a sub-folder in your “Source” directory. Second Conversion As you might expect, this option allows MCEBuddy to perform a second conversion of your file. This can be useful if you want to use your first conversion to create a higher quality MP4 or AVI file for playback on a larger screen, and a second one for a portable device such as Zune or iPhone. The same options from the first conversion are also available for the second. You’ll want to choose a separate Destination folder for the second conversion.   Start and Monitor Progress To start converting your video files, simply press the “Start” button at the bottom. You’ll be able to follow the progress in the “Current Activity” section. When all the video files have finished converting, or there are no current files to convert, MCEBuddy will display a “Started – Idle” status. Click “Stop” if you don’t want MCEBuddy to continue scanning for new files.   Conclusion MCEBuddy 1.1 will convert all WTV files in it’s source folder. If you want to pick and choose which recordings to convert, you may want to define a source folder different than the Recorded TV folder and then just copy or move the files you wish to convert into the new source folder. The conversion process does take a good bit of time. If you choose the commercial skipping and second conversion options it can take several hours to fully convert one TV recording. Overall, MCEBuddy makes a nice Media Center addition for those that want to save some space with smaller size files, convert Recorded TV files for their portable device, or automatically remove commercials. If you’re looking for a different method to skip commercials check out our post on how to skip commercials in Windows 7 Media Center. Download MCEBuddy 1.1 Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Skip Commercials in Windows 7 Media CenterHow To Convert Video Files to MP3 with VLCStartup Customizations for Media Center in Windows 7Add Folders to the Movie Library in Windows 7 Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• WebLogic Server Performance and Tuning: Part I - Tuning JVM

  - by Gokhan Gungor

  Each WebLogic Server instance runs in its own dedicated Java Virtual Machine (JVM) which is their runtime environment. Every Admin Server in any domain executes within a JVM. The same also applies for Managed Servers. WebLogic Server can be used for a wide variety of applications and services which uses the same runtime environment and resources. Oracle WebLogic ships with 2 different JVM, HotSpot and JRocket but you can choose which JVM you want to use. JVM is designed to optimize itself however it also provides some startup options to make small changes. There are default values for its memory and garbage collection. In real world, you will not want to stick with the default values provided by the JVM rather want to customize these values based on your applications which can produce large gains in performance by making small changes with the JVM parameters. We can tell the garbage collector how to delete garbage and we can also tell JVM how much space to allocate for each generation (of java Objects) or for heap. Remember during the garbage collection no other process is executed within the JVM or runtime, which is called STOP THE WORLD which can affect the overall throughput. Each JVM has its own memory segment called Heap Memory which is the storage for java Objects. These objects can be grouped based on their age like young generation (recently created objects) or old generation (surviving objects that have lived to some extent), etc. A java object is considered garbage when it can no longer be reached from anywhere in the running program. Each generation has its own memory segment within the heap. When this segment gets full, garbage collector deletes all the objects that are marked as garbage to create space. When the old generation space gets full, the JVM performs a major collection to remove the unused objects and reclaim their space. A major garbage collect takes a significant amount of time and can affect system performance. When we create a managed server either on the same machine or on remote machine it gets its initial startup parameters from $DOMAIN_HOME/bin/setDomainEnv.sh/cmd file. By default two parameters are set:     Xms: The initial heapsize     Xmx: The max heapsize Try to set equal initial and max heapsize. The startup time can be a little longer but for long running applications it will provide a better performance. When we set -Xms512m -Xmx1024m, the physical heap size will be 512m. This means that there are pages of memory (in the state of the 512m) that the JVM does not explicitly control. It will be controlled by OS which could be reserve for the other tasks. In this case, it is an advantage if the JVM claims the entire memory at once and try not to spend time to extend when more memory is needed. Also you can use -XX:MaxPermSize (Maximum size of the permanent generation) option for Sun JVM. You should adjust the size accordingly if your application dynamically load and unload a lot of classes in order to optimize the performance. You can set the JVM options/heap size from the following places:     Through the Admin console, in the Server start tab     In the startManagedWeblogic script for the managed servers     $DOMAIN_HOME/bin/startManagedWebLogic.sh/cmd     JAVA_OPTIONS="-Xms1024m -Xmx1024m" ${JAVA_OPTIONS}     In the setDomainEnv script for the managed servers and admin server (domain wide)     USER_MEM_ARGS="-Xms1024m -Xmx1024m" When there is free memory available in the heap but it is too fragmented and not contiguously located to store the object or when there is actually insufficient memory we can get java.lang.OutOfMemoryError. We should create Thread Dump and analyze if that is possible in case of such error. The second option we can use to produce higher throughput is to garbage collection. We can roughly divide GC algorithms into 2 categories: parallel and concurrent. Parallel GC stops the execution of all the application and performs the full GC, this generally provides better throughput but also high latency using all the CPU resources during GC. Concurrent GC on the other hand, produces low latency but also low throughput since it performs GC while application executes. The JRockit JVM provides some useful command-line parameters that to control of its GC scheme like -XgcPrio command-line parameter which takes the following options; XgcPrio:pausetime (To minimize latency, parallel GC) XgcPrio:throughput (To minimize throughput, concurrent GC ) XgcPrio:deterministic (To guarantee maximum pause time, for real time systems) Sun JVM has similar parameters (like  -XX:UseParallelGC or -XX:+UseConcMarkSweepGC) to control its GC scheme. We can add -verbosegc -XX:+PrintGCDetails to monitor indications of a problem with garbage collection. Try configuring JVM’s of all managed servers to execute in -server mode to ensure that it is optimized for a server-side production environment.

  Read the article

• SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28

  - by pinaldave

  It is very easy to say that you replace your hardware as that is not up to the mark. In reality, it is very difficult to implement. It is really hard to convince an infrastructure team to change any hardware because they are not performing at their best. I had a nightmare related to this issue in a deal with an infrastructure team as I suggested that they replace their faulty hardware. This is because they were initially not accepting the fact that it is the fault of their hardware. But it is really easy to say “Trust me, I am correct”, while it is equally important that you put some logical reasoning along with this statement. PAGEIOLATCH_XX is such a kind of those wait stats that we would directly like to blame on the underlying subsystem. Of course, most of the time, it is correct – the underlying subsystem is usually the problem. From Book On-Line: PAGEIOLATCH_DT Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Destroy mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_EX Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Exclusive mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_KP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Keep mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_SH Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_UP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Update mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_XX Explanation: Simply put, this particular wait type occurs when any of the tasks is waiting for data from the disk to move to the buffer cache. ReducingPAGEIOLATCH_XX wait: Just like any other wait type, this is again a very challenging and interesting subject to resolve. Here are a few things you can experiment on: Improve your IO subsystem speed (read the first paragraph of this article, if you have not read it, I repeat that it is easy to say a step like this than to actually implement or do it). This type of wait stats can also happen due to memory pressure or any other memory issues. Putting aside the issue of a faulty IO subsystem, this wait type warrants proper analysis of the memory counters. If due to any reasons, the memory is not optimal and unable to receive the IO data. This situation can create this kind of wait type. Proper placing of files is very important. We should check file system for the proper placement of files – LDF and MDF on separate drive, TempDB on separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. It is very possible that there are no proper indexes on the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can significantly reduce lots of CPU, Memory and IO (considering cover index has much lesser columns than cluster table and all other it depends conditions). You can refer to the two articles’ links below previously written by me that talk about how to optimize indexes. Create Missing Indexes Drop Unused Indexes Updating statistics can help the Query Optimizer to render optimal plan, which can only be either directly or indirectly. I have seen that updating statistics with full scan (again, if your database is huge and you cannot do this – never mind!) can provide optimal information to SQL Server optimizer leading to efficient plan. Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All of the discussions of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• BizTalk Server 2009 - Architecture Options

  - by StuartBrierley

  I recently needed to put forward a proposal for a BizTalk 2009 implementation and as a part of this needed to describe some of the basic architecture options available for consideration.  While I already had an idea of the type of environment that I would be looking to recommend, I felt that presenting a range of options while trying to explain some of the strengths and weaknesses of those options was a good place to start.  These outline architecture options should be equally valid for any version of BizTalk Server from 2004, through 2006 and R2, up to 2009.   The following diagram shows a crude representation of the common implementation options to consider when designing a BizTalk environment.         Each of these options provides differing levels of resilience in the case of failure or disaster, with the later options also providing more scope for performance tuning and scalability.   Some of the options presented above make use of clustering. Clustering may best be described as a technology that automatically allows one physical server to take over the tasks and responsibilities of another physical server that has failed. Given that all computer hardware and software will eventually fail, the goal of clustering is to ensure that mission-critical applications will have little or no downtime when such a failure occurs. Clustering can also be configured to provide load balancing, which should generally lead to performance gains and increased capacity and throughput.   (A) Single Servers   This option is the most basic BizTalk implementation that should be considered. It involves the deployment of a single BizTalk server in conjunction with a single SQL server. This configuration does not provide for any resilience in the case of the failure of either server. It is however the cheapest and easiest to implement option of those available.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (B) Single BizTalk Server with Clustered SQL Servers   This option uses a single BizTalk server with a cluster of SQL servers. By utilising clustered SQL servers we can ensure that there is some resilience to the implementation in respect of the databases that BizTalk relies on to operate. The clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition. While this option offers improved resilience over option (A) it does still present a potential single point of failure at the BizTalk server.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. You are also unable to take advantage of multiple message boxes, which would allow us to balance the SQL load in the event of any bottlenecks in this area of the implementation. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (C) Clustered BizTalk Servers with Clustered SQL Servers   This option makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in the case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    The use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning any implemented solutions. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling out the solution as future demand requires.   This might be seen as the middle cost option, providing a good level of protection in the case of failure, a decent level of future proofing, but at a higher cost than the single BizTalk server implementations.   (D) Clustered BizTalk Servers with Clustered SQL Servers – with disaster recovery/service continuity   This option is similar to that offered by (C) and makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    As with (C) the use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning the implemented solution. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling the solution out as future demand requires.   In this scenario however, we would be including some form of disaster recovery or service continuity. An example of this would be making use of multiple sites, with the BizTalk server cluster operating across sites to offer resilience in case of the loss of one or more sites. In this scenario there are options available for the SQL implementation depending on the network implementation; making use of either one cluster per site or a single SQL cluster across the network. A multi-site SQL implementation would require some form of data replication across the sites involved.   This is obviously an expensive and complex option, but does provide an extraordinary amount of protection in the case of failure.

  Read the article

• Your thoughts on Best Practices for Scientific Computing?

  - by John Smith

  A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

  Read the article

• SQL SERVER – Beginning of SQL Server Architecture – Terminology – Guest Post

  - by pinaldave

  SQL Server Architecture is a very deep subject. Covering it in a single post is an almost impossible task. However, this subject is very popular topic among beginners and advanced users.  I have requested my friend Anil Kumar who is expert in SQL Domain to help me write  a simple post about Beginning SQL Server Architecture. As stated earlier this subject is very deep subject and in this first article series he has covered basic terminologies. In future article he will explore the subject further down. Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. In this Article we will discuss about MS SQL Server architecture. The major components of SQL Server are: Relational Engine Storage Engine SQL OS Now we will discuss and understand each one of them. 1) Relational Engine: Also called as the query processor, Relational Engine includes the components of SQL Server that determine what your query exactly needs to do and the best way to do it. It manages the execution of queries as it requests data from the storage engine and processes the results returned. Different Tasks of Relational Engine: Query Processing Memory Management Thread and Task Management Buffer Management Distributed Query Processing 2) Storage Engine: Storage Engine is responsible for storage and retrieval of the data on to the storage system (Disk, SAN etc.). to understand more, let’s focus on the following diagram. When we talk about any database in SQL server, there are 2 types of files that are created at the disk level – Data file and Log file. Data file physically stores the data in data pages. Log files that are also known as write ahead logs, are used for storing transactions performed on the database. Let’s understand data file and log file in more details: Data File: Data File stores data in the form of Data Page (8KB) and these data pages are logically organized in extents. Extents: Extents are logical units in the database. They are a combination of 8 data pages i.e. 64 KB forms an extent. Extents can be of two types, Mixed and Uniform. Mixed extents hold different types of pages like index, System, Object data etc. On the other hand, Uniform extents are dedicated to only one type. Pages: As we should know what type of data pages can be stored in SQL Server, below mentioned are some of them: Data Page: It holds the data entered by the user but not the data which is of type text, ntext, nvarchar(max), varchar(max), varbinary(max), image and xml data. Index: It stores the index entries. Text/Image: It stores LOB ( Large Object data) like text, ntext, varchar(max), nvarchar(max),  varbinary(max), image and xml data. GAM & SGAM (Global Allocation Map & Shared Global Allocation Map): They are used for saving information related to the allocation of extents. PFS (Page Free Space): Information related to page allocation and unused space available on pages. IAM (Index Allocation Map): Information pertaining to extents that are used by a table or index per allocation unit. BCM (Bulk Changed Map): Keeps information about the extents changed in a Bulk Operation. DCM (Differential Change Map): This is the information of extents that have modified since the last BACKUP DATABASE statement as per allocation unit. Log File: It also known as write ahead log. It stores modification to the database (DML and DDL). Sufficient information is logged to be able to: Roll back transactions if requested Recover the database in case of failure Write Ahead Logging is used to create log entries Transaction logs are written in chronological order in a circular way Truncation policy for logs is based on the recovery model SQL OS: This lies between the host machine (Windows OS) and SQL Server. All the activities performed on database engine are taken care of by SQL OS. It is a highly configurable operating system with powerful API (application programming interface), enabling automatic locality and advanced parallelism. SQL OS provides various operating system services, such as memory management deals with buffer pool, log buffer and deadlock detection using the blocking and locking structure. Other services include exception handling, hosting for external components like Common Language Runtime, CLR etc. I guess this brief article gives you an idea about the various terminologies used related to SQL Server Architecture. In future articles we will explore them further. Guest Author  The author of the article is Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• Workaround for datadude deployment bug - NullReferenceException

  - by jamiet

  I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN (    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged)   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels()   at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan()   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment)   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute()   at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute()   at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()   at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult)   Done executing task "SqlDeployTask" -- FAILED.  Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function  (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment.   Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --(    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work.   I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• SQL SERVER – SSMS: Backup and Restore Events Report

  - by Pinal Dave

  A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched.   Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 ,       1 AS l2 ,       1 AS l3 ,       t1.TYPE AS [type] ,       (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section.   This information is derived from various backup tracking tables from msdb database.  Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC,  t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• To ORM or Not to ORM. That is the question&hellip;

  - by Patrick Liekhus

  UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

  Read the article

• Why Software Sucks...and What You Can Do About It – book review

  - by DigiMortal

      How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

  Read the article

• Backup options in SharePoint 2007

  - by sreejukg

  It is very important to make sure the server farm backup is taking properly, making sure that in case of any disaster, the administrator has the latest backup that can be used to restore. This articles addresses some of the options available for backup/restore in SharePoint 2007 Backup There are two options that can be utilized to take backup of SharePoint sites. Using SharePoint Central Administration website Using SharePoint central administration website, you can do backup/restore from user interface. Using central administration website you can back up the following · Server farm · Web application · Content databases Follow these steps to take backup of the server farm using central administration 1. Open Central administration website 2. Navigate to Operations -> Backup and Restore -> Perform a backup 3. Here you will have options to choose the item to back up. Select Farm (the top most item in the list) 4. Once you select the items to backup, click on “Continue to backup options” 5. Select “Full” as type of backup. 6. In the backup file location, enter the path where you need to store the backup. The path should be according to the UNC, for e.g. for c drive you may use \\server\c$\mybackupFolder 7. Click ok 8. Now you will be redirected to Backup and Restore Status page. This page shows the progress for the backup operation. You can use the refresh button to update the status of backup(this page will automatically refresh in every 30 seconds). Once completed you can find the files in the specified folder. Using STSADM website SharePoint comes with a STSADM command line tool. STSADM provides lot of administrative operations that can be performed on SharePoint 2007 sites. You can find STSADM command from the following location C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin (You may change the drive letter according to your installation) STSADM provides a method for performing the Office SharePoint Server 2007 administration tasks at the command line or by using batch files or scripts. STSADM provides access to operations not available by using the Central Administration site The general syntax for STSADM is as follows STSADM -operation Operation Name –parameter1 value1 –parameter2 value2 ……….. Using STSADM you can back up the following · Server farm · Web application · Content databases To perform any STSADM, operation you need to be a member of administrators group. Follow these steps to take backup of SharePoint server farm using STSADM tool. Note: make sure you are logged in to the computer where central administration website is installed. 1. Open the Command prompt (You should run command prompt with administrator privileges) 2. Change the working directory to C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin 3. Enter the command, then press enter Stsadm –o backup -directory <UNC path> -backupmethod full 4. You will get success / failure message once the command finishes. How to schedule the backup There is no option to schedule a backup using central administration site. Also there is no operation provided by STSADM to automate the backup. The farm administrators need to take backup in regular intervals. To achieve this, you can write a batch file that includes STSADM command to take full backup of the server. This batch file can be scheduled using windows task scheduler to execute in certain intervals. Sample of the batch file 1. Open notepad(or any other text editor) 2. Enter the following commands @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm.exe -o backup -directory "<\backup>" -backupmethod full echo completed 3. Save the file with .bat extension You can schedule this batch file as you require. Other Options Using STSADM tool, you will be able to take backup for individual site collection. The syntax for this is stsadm -o backup -url <URL name for site collection> -filename <file name> [-overwrite] The explanations for the parameters are as follows. -url The url of the site collection you need to backup -filename The name of the backup file. E.g. c:\backup.bak -overwrite optional. Indicates if the filename specified exists, whether to overwrite or not. If you are creating the batch file for scheduling the backup for a site collection, you may need to specify the backup filename automatically created. It is an option that you can generate the filename with date so that you can keep backup for each day. e.g. The following commands can be utilized create a site collection backup. @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== echo =============================================================== echo getting todays date to a variable echo =============================================================== @For /F "tokens=1,2,3 delims=/ " %%A in (‘Date /t’) do @( Set Day=%%A Set Month=%%B Set Year=%%C Set todayDate=%%C%%B%%A ) cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm -o backup -url <sitecollection url> -filename \\ServerName\ShareName\Backup_%todayDate%.bak -overwrite echo completed To read more about backup STSADM operation, read this http://technet.microsoft.com/en-us/library/cc263441.aspx

  Read the article

• rake migration aborted: could not find table 'roles'

  - by user464180

  I just inherited code that I'm attempting to run the migrations for but I keep getting a rake aborted error. I've come across others that have what appears to be similar issues, but most involved Heroku and I'm trying to run this locally (to start.) I've tried troubleshooting using both PostgreSQL and SQLite, and both produce the same issue. The table "roles" referenced is the second migration called, so I'm having a hard time figuring out what is causing it to not get built. Any and all assistance is greatly appreciated. Thanks in advance. Here's the roles migration: class CreateRoles < ActiveRecord::Migration def change create_table :roles do |t| t.string :name t.timestamps end end end Here is the trace for SQLite: ** Invoke db:migrate (first_time) ** Invoke environment (first_time) ** Execute environment rake aborted! Could not find table 'roles' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/sqlite_adapter.rb:470:in `table_structure' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/sqlite_adapter.rb:351:in `columns' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/schema_cache.rb:12:in `block in initialize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `yield' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `default' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `columns' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:248:in `column_names' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:261:in `column_methods_hash' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/dynamic_matchers.rb:69:in `all_attributes_exists?' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/dynamic_matchers.rb:27:in `method_missing' /Users/sa/Documents/AptanaWorkspace/recprototype/config/initializ ers/constants.rb:1:in `<top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `block in load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:236:in `load_dependency' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:588:in `block (2 levels) in <class:Engine>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:587:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:587:in `block in <class:Engine>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:30:in `instance_exec' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:30:in `run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:55:in `block in run_initializers' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:54:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:54:in `run_initializers' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:136:in `initialize!' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/rail tie/configurable.rb:30:in `method_missing' /Users/sa/Documents/AptanaWorkspace/recprototype/config/environme nt.rb:5:in `<top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `block in require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:236:in `load_dependency' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:103:in `require_environment!' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:292:in `block (2 levels) in initialize_tasks' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :205:in `call' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :205:in `block in execute' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :200:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :200:in `execute' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :158:in `block in invoke_with_call_chain' /Users/sa/.rvm/rubies/ruby-1.9.2-p318/lib/ruby/1.9.1/monitor.rb:201:in `mon_synchronize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :151:in `invoke_with_call_chain' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :176:in `block in invoke_prerequisites' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :174:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :174:in `invoke_prerequisites' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :157:in `block in invoke_with_call_chain' /Users/sa/.rvm/rubies/ruby-1.9.2-p318/lib/ruby/1.9.1/monitor.rb:201:in `mon_synchronize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :151:in `invoke_with_call_chain' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :144:in `invoke' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:116:in `invoke_task' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `block (2 levels) in top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `block in top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:133:in `standard_exception_handling' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:88:in `top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:66:in `block in run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:133:in `standard_exception_handling' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:63:in `run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/bin/rake:33:in ` <top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/bin/rake:19:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/bin/rake:19:in `<main>' Tasks: TOP => db:migrate => environment Here is the trace for PostgreSQL: ** Invoke db:migrate (first_time) ** Invoke environment (first_time) ** Execute environment rake aborted! PG::Error: ERROR: relation "roles" does not exist LINE 4: WHERE a.attrelid = '"roles"'::regclass ^ : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a .attnotnull FROM pg_attribute a LEFT JOIN pg_attrdef d ON a.attrelid = d.adrelid AND a.attnum = d.adnum WHERE a.attrelid = '"roles"'::regclass AND a.attnum > 0 AND NOT a.attisdropped ORDER BY a.attnum /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:1106:in `async_exec' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:1106:in `exec_no_cache' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:650:in `block in exec_query' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/abstract_adapter.rb:280:in `block in log' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/notifications/instrumenter.rb:20:in `instrument' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/abstract_adapter.rb:275:in `log' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:649:in `exec_query' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:1231:in `column_definitions' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/postgresql_adapter.rb:845:in `columns' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/connection_adapters/schema_cache.rb:12:in `block in initialize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `yield' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `default' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:228:in `columns' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:248:in `column_names' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/model_schema.rb:261:in `column_methods_hash' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/dynamic_matchers.rb:69:in `all_attributes_exists?' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activerecord-3.2.1/lib/active _record/dynamic_matchers.rb:27:in `method_missing' /Users/sa/Documents/AptanaWorkspace/recprototype/config/initializ ers/constants.rb:1:in `<top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `block in load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:236:in `load_dependency' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:245:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:588:in `block (2 levels) in <class:Engine>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:587:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/engi ne.rb:587:in `block in <class:Engine>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:30:in `instance_exec' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:30:in `run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:55:in `block in run_initializers' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:54:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/init ializable.rb:54:in `run_initializers' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:136:in `initialize!' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/rail tie/configurable.rb:30:in `method_missing' /Users/sa/Documents/AptanaWorkspace/recprototype/config/environme nt.rb:5:in `<top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `block in require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:236:in `load_dependency' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/activesupport-3.2.1/lib/activ e_support/dependencies.rb:251:in `require' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:103:in `require_environment!' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/railties-3.2.1/lib/rails/appl ication.rb:292:in `block (2 levels) in initialize_tasks' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :205:in `call' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :205:in `block in execute' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :200:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :200:in `execute' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :158:in `block in invoke_with_call_chain' /Users/sa/.rvm/rubies/ruby-1.9.2-p318/lib/ruby/1.9.1/monitor.rb:201:in `mon_synchronize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :151:in `invoke_with_call_chain' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :176:in `block in invoke_prerequisites' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :174:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :174:in `invoke_prerequisites' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :157:in `block in invoke_with_call_chain' /Users/sa/.rvm/rubies/ruby-1.9.2-p318/lib/ruby/1.9.1/monitor.rb:201:in `mon_synchronize' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :151:in `invoke_with_call_chain' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/task.rb :144:in `invoke' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:116:in `invoke_task' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `block (2 levels) in top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `each' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:94:in `block in top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:133:in `standard_exception_handling' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:88:in `top_level' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:66:in `block in run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:133:in `standard_exception_handling' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/lib/rake/applica tion.rb:63:in `run' /Users/sa/.rvm/gems/ruby-1.9.2-p318/gems/rake-0.9.2.2/bin/rake:33:in ` <top (required)>' /Users/sa/.rvm/gems/ruby-1.9.2-p318/bin/rake:19:in `load' /Users/sa/.rvm/gems/ruby-1.9.2-p318/bin/rake:19:in `<main>' Tasks: TOP => db:migrate => environment

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >