Search Results

Search found 5291 results on 212 pages for 'disable'.

Page 146/212 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • ubuntu 10.04: boot error for custom compiled kernel - gave up wating for root device

    - by atharva
    Hi, I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platoform) and it is working fine. Now I have compiled kernel 2.6.37 from the downloaded from the kernel tree. I followed usual procedure of compileing kernel (make menuconfig,make. make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using upadate grub command. Update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different ubuntu forums: 1. disable uuid and point root=/dev/sda8 (sda8 is where my kernele image resides (both default kernel and compiled one) from /etc/default/grub 2. compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution ?

    Read the article

  • How to implement behavior in a component-based game architecture?

    - by ghostonline
    I am starting to implement player and enemy AI in a game, but I am confused about how to best implement this in a component-based game architecture. Say I have a following player character that can be stationary, running and swinging a sword. A player can transit to the swing sword state from both the stationary and running state, but then the swing must be completed before the player can resume standing or running around. During the swing, the player cannot walk around. As I see it, I have two implementation approaches: Create a single AI-component containing all player logic (either decoupled from the actual component or embedded as a PlayerAIComponent). I can easily how to enforce the state restrictions without creating coupling between individual components making up the player entity. However, the AI-component cannot be broken up. If I have, for example, an enemy that can only stand and walk around or only walks around and occasionally swing a sword, I have to create new AI-components. Break the behavior up in components, each identifying a specific state. I then get a StandComponent, WalkComponent and SwingComponent. To enforce the transition rules, I have to couple each component. SwingComponent must disable StandComponent and WalkComponent for the duration of the swing. When I have an enemy that only stands around, swinging a sword occasionally, I have to make sure SwingComponent only disables WalkComponent if it is present. Although this allows for better mix-and-matching components, it can lead to a maintainability nightmare as each time a dependency is added, the existing components must be updated to play nicely with the new requirements the dependency places on the character. The ideal situation would be that a designer can build new enemies/players by dragging components into a container, without having to touch a single line of engine or script code. Although I am not sure script coding can be avoided, I want to keep it as simple as possible. Summing it all up: Should I lob all AI logic into one component or break up each logic state into separate components to create entity variants more easily?

    Read the article

  • Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

    - by echo-flow
    I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

    Read the article

  • windows 8 + Ubuntu dual boot

    - by Jack Yuan
    I installed Ubuntu 13.04 on Windows 8. Yes I can access both of them, but the process is kind of long. In BIOS, EFI is for Windows 8, legacy support is for Ubuntu. If I choose EFI first, the startup just go straight to Win8 without offering me a choice. If I choose legacy first, the starup will offer me a choice between win8 and ubuntu. But I can only choose Ubuntu. If i choose win8, there will be a mistake(file missing under configuration). That is to say, every time i wanna switch to another OS, I have to go into BIOS and change the priority settings. I heard something about secure boot might be the cause of this situation. But the thing is that there is not even an option called "secure boot" in my BIOS, which means i cannot disable it. All I want is that an option menu appears everytime i turn on my computer so i can easily choose what OS I want for today. Can anyone help me plz? Thank you very much!!

    Read the article

  • How to start Ubuntu with no working video card?

    - by ViliusK
    I have a laptop with broken video card. It has two operating systems installed - Windows 7 and Ubuntu 10.10 Desktop Edition. It has GRUB to manage which operating system to boot up. Windows is default OS. And Windows fails to boot up without video card. I'm checking with ping to the ports which are shown as used by DHCP in my router. Normal boot of Ubuntu also fails and it restarts after a while. But when I choose (blindly, but checking HDD indicator and by counting button presses when GRUB menu appears) to boot second option of Ubuntu (rescue mode) it starts and I can ping it. But when I try to connect to it through SSH, I'm getting "connection refused" error from putty. I've took out HDD from my laptop already and inserted it to WD Passport case so now I can connect it to other computer to edit configuration files. How can I check if SSH server is working? How to enable it in rescue mode? Or better, how to disable video card to be required while booting Ubuntu in normal mode?

    Read the article

  • Blocking popups and ads

    - by user74364
    I'm having a fight with ads, popups and tracking cookies. But i'm having some issues. Software used: Chromium 18.0.1025.168 Extensions used: Adblock Plus (Beta)1.2 AdBlock+ Element Hiding Helper1.1.9.18 Better Pop Up Blocker2.1.6 Ghostery3.0.0 With this configuration, i'm always getting this error: Warning: This extension failed to modify a network request because the modification conflicted with another extension. I know if i disable "better popup", this goes away. It's perfectly normal, due to those extensions trying to block the same things. Problem is, i can't live without all of them! Can anyone advise me about some good configuration? Can't live without adblock plus, because i hate ads. Betterpopup blocker is essential too (believe me, chrome doesn't block a lot of popups, and i have a website or 2 that can proove that.) And ghostery is a must... i can't bare the idea of being tracked all the time by some companies. So i'm kinda lost here! everything is needed, but they conflict with each other. i mean, it has to exist a perfect combination out there, i know i'm not the only one hating the privacy issues nowadays! really thankful for any tips guys

    Read the article

  • Neverending issues with grub (ubuntu 14.04 on ASUS with Win8 dual boot)

    - by Mariana
    This is the most frustrating issue I have ever run into using Ubuntu and Windows in the same machine. I have an ASUS K46CB, 6GB RAM and preinstalled Windows 8.1 64-bits. I have successfully installed Ubuntu 14.04 LTS, also 64-bits. To do so,I followed this tutorial whenever possible. I only failed on the disable secure boot part: there is no 'Secure-boot' or even UEFI mention in my BIOS! Screenshots from other BIOS of the same model show the option under Boot, but in mine there is absolutely none. Because of this, I cannot boot into Ubuntu. The computer loads straight into Windows. I tried running boot repair, but got an error (i can show the log, but it's pretty long). Does anyone know how to fix this issue? UPDATE I reinstalled Ubuntu. Same problem, goes straight to Window. Boot-Repair informs me that i am using Windows in Legacy mode. It excecuted with no errors this time, but after restarting GRUB was still missing. I can't turn off Secure Boot yet. UPDATE I tried using Boot Repair to install grub on a boot-grub 1mb partition. Still boots straight to windows. I feel like punching something

    Read the article

  • Multi-screen and Nvidia GT220

    - by Bohors
    Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

    Read the article

  • How to refactor to cleaner version of maintaing states of the widget

    - by George
    Backstory I inherited a bunch of code that I'd like to refactor. It is a UI application written in javascript. Current state: We have main application which consist of several UI components. And each component has entry fields, textboxes, menus, etc), like "ticket", "customer information", etc. Based on input, where the application was called from, who is the user, we enable/disable, hide, show, change titles. Unfortunately, the app grew to the point where it is really hard to scale, add new features. Main the driver (application code) calls set/unset functions of the respective components. So a lot of the stuff look like this Main app unit function1() { **call_function2()** component1.setX(true); component1.setY(true); component2.setX(false); } call_function2() { // it may repeat some of the code function1 called } and we have a lot of this in the main union. I am cleaning this mess. What is the best way to maintain the state of widgets? Please let me know if you need me to clarify.

    Read the article

  • Ubuntu 10.04: boot error for custom compiled kernel - gave up waiting for root device

    - by atharva
    I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platform) and it is working fine. Now I have compiled kernel 2.6.37 downloaded from the kernel tree. I followed usual procedure of compiling kernel (make menuconfig, make, make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using update-grub command. update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different Ubuntu forums: disable uuid and point root=/dev/sda8 (sda8 is where my kernel image resides (both default kernel and compiled one) from /etc/default/grub compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution?

    Read the article

  • Why don't my Fn keys work for brightness or media after upgrading?

    - by Adina G
    I recently upgraded from 11.04 to 11.10. After the upgrade, I can no longer adjust the screen brightness or the volume using keyboard (before the upgrade, using Fn+F4, Fn+F11, etc. worked). Using Fn+F2 to disable wireless still works, so I guess the Fn key itself is being recognised. I tried to follow the instructions here, but I don't have a file in /etc/X11 called xorg.conf. I also tried following this workaround, but it had no noticeable effect. I've also tried going to Settings ? Keyboard ? Shortcuts and reassigning the brightness and volume controls, both to the default keys and to new combinations. These changes don't have an effect even after rebooting. Googling has found bug reports where pressing the media keys brings up a "no entry sign" rather than changing the volume. When I press the keys there's no response at all. I've also seen various people say a workaround is to have totem running in the background; this doesn't work for me either. Finally, I tried installing keytouch; I was able to install keytouch-editor but got the message "Unable to locate package keytouch". Any more ideas? I'd be very grateful if anyone could help me (even by pointing to a thread I've missed)!

    Read the article

  • Is there a standard way to track 2d tile positions both locally and on screen?

    - by Magicked
    I'm building a 2D engine based on 32x32 tiles with OpenGL. OpenGL draws from the top left, so Y coordinates go down the screen as they increase. Obviously this is different than a standard graph where Y coordinates move up as they increase. I'm having trouble determining how I want to track positions for both sprites and tile objects (objects that are collections of tiles). My brain wants to set the world position as the bottom left of the object and track every object this way. The problem with this is I would have to translate it to an on screen position on rendering. The positive with this is I could easily visualize (especially in the case of objects made of multiple tiles) how something is structured and needs to be built. Are there standard ways for doing this? Should I just suck it up and get used to positions beginning in the top left? Here are the OpenGL calls to start rendering: // enable textures since we're going to use these for our sprites glEnable(GL_TEXTURE_2D); glClearColor(0.0f, 0.0f, 0.0f, 0.0f); // enable alpha blending glEnable(GL_BLEND); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); // disable the OpenGL depth test since we're rendering 2D graphics glDisable(GL_DEPTH_TEST); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrtho(0, WIDTH, HEIGHT, 0, 1, -1); glMatrixMode(GL_MODELVIEW); I assume I need to change: glOrtho(0, WIDTH, HEIGHT, 0, 1, -1); to: glOrtho(0, WIDTH, 0, HEIGHT, 1, -1);

    Read the article

  • How do I turn off PCI devices?

    - by ethana2
    With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

    Read the article

  • Users can benefit from Session Tracking

    I use to work for a large Dental Plan marketing website a few years ago and they had a large customer-driven website that sold Dental Plans to consumers. Their website started tracking users as soon as they hit their web servers, and then they logged everything they could about the user. There are a lot of benefits for using session tracking for both the user and the website. Users can benefit from session tracking due to the fact that a website can retain pertaining information for the user so that they do not have to re-enter the same information repeatedly. In addition, websites can hold specific items in a cart for each user so that they can pay for all of their  items at once when they are ready to complete their purchases. Websites can also benefit from session tracking because they can determine where a specific user came from and which advertising partner gave them a sale. This information is very useful when deciding on where to spend an advertising budget. There is only one real disadvantage when it comes to session tracking, Users can not really control what is actually tracked by a website. Yes, they can disable cookies and this will help, but that means that no tracking can be done at all. Most sites require users to have cookies enabled in order for users to make purchases or login to their accounts.

    Read the article

  • Booting off a ZFS root in 14.04

    - by RJVB
    I've been running a Debian derivative (LMDE) on a ZFS root for half a year now. It was created by cloning a regular ext4-based install with all the necessary packages onto a ZFS pool, chrooting into that pool and recreating a grub menu and bootloader. The system uses an ext-3 dedicated /boot partition. I would like to do the same with Ubuntu 14.04, but have encountered several obstacles. There is no Trusty zfs-grub package The default grub package doesn't have ZFS support built in. I found a small bug in the build system responsible for that (report with patch created) and built my own grub packages. The built-in ZFS support is dysfunctional, it does not add the proper arguments to the kernel command line I thus installed the ZoL grub package I also use on my LMDE system, which does give me a correct grub.cfg However, even with that correct grub.cfg, the boot process apparently doesn't retrieve the bootfs parameter from the ZFS pool; instead the variable that's supposed to receive the value remains empty. As a result, initrd tries to load the default pool ("rpool"), which fails of course. I can however import the pool by hand, and complete the process by hand. If memory serves me well, I also had to disable apparmor, to avoid the boot process from blocking after importing the pool. Am I overlooking something? Just for comparison, I installed the Ubuntu 3.13 kernel on my LMDE system, and that works just fine (i.e. the identical kernel and grub binaries allow successful booting without glitches on LMDE but not on Ubuntu).

    Read the article

  • Google Music Player doesn't work

    - by EricoPF
    I'm trying to log in on Google Music Player application but doesn't work. I get the message below: Login Failed Could not identify your computer. Learn More On Google Help it says that it doesn't run on virtual machines, which is not my case, but I have a virtualbox installed though, and it says some people get to work if they disable their bridge network. The thing is I don't have any bridge interface, even if I remove all virtualbox modules I still get this message. This is my ifconfig output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:15374 errors:0 dropped:0 overruns:0 frame:0 TX packets:15374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1455889 (1.4 MB) TX bytes:1455889 (1.4 MB) wlan0 Link encap:Ethernet HWaddr 94:db:c9:b2:1b:d7 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::96db:c9ff:feb2:1bd7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:828467 errors:0 dropped:0 overruns:0 frame:0 TX packets:568040 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1086663025 (1.0 GB) TX bytes:72984931 (72.9 MB) Any ideias ? Thanks guys! Cheers.

    Read the article

  • Dynamic Monitoring Service (DMS) Configuration Dumping and CPU Utilization

    - by ShawnBailey
    There was recently a report of CPU spikes on a system that were occuring at precise 3 hour intervals. Research revealed that the spikes were the result of the Dynamic Monitoring Service generating a metrics dump and writing it under the server 'logs' folder for every WLS server in the domain. This blog provides some information on what this is for and how to control it. The Dynamic Monitoring Service is a facility in FMw (JRF to be more precise) that collects runtime data on the components deployed to WebLogic. Each component is responsible for how much or how little they use the service and SOA collects a fair amount of information. To view what is collected on any running server you can use the following URL, http://host:port/dms/Spy and login with admin credentials. DMS is essentially always running and collecting this information in the runtime and to protect against loss of this data it also runs automatic backups, by default at the 3 hour interval mentioned above. Most of the management options for DMS are exposed through WLST but these settings are not so we must open the dms_config.xml file which can be found in DOMAIN_HOME/config/fmwconfig/servers/<server_name>/dms_config.xml. The contents are fairly short and at the bottom you will find the following entry: <dumpConfiguration>     <dump intervalSeconds="10800" maxSizeMBytes="75" enabled="true"/> </dumpConfiguration> The interval of 10800 seconds corresponds to the 3 hours and the maximum size is 75MB. The file is written as an archive to DOMAIN_HOME/servers/<server_name>/logs/metrics. This archive contains the dump in XML format. You can disable the dumps all together by simply setting the 'enabled' value to 'false' or of course you could modify the other parameters to suit your needs. Disabling the dumps will NOT impact DMS collections or display at runtime. It will only eliminate these periodic backups.

    Read the article

  • A Dozen USB Chargers Analyzed; Or: Beware the Knockoffs

    - by Jason Fitzpatrick
    When it comes to buying a USB charger one is just as good as another so you might as well buy the cheapest one, right? This interesting and detailed analysis of name brand, off-brand, and counterfeit chargers will have you rethinking that stance. Ken Shirriff gathered up a dozen USB chargers including official Apple chargers, counterfeit Apple chargers, as well as offerings from Monoprice, Belkin, Motorola, and other companies. After putting them all through a battery of tests he gave them overall rankings based on nine different categories including power stability, power quality, and efficiency. The take away from his research? Quality varied widely between brands but when sticking with big companies like Apple or HP the chargers were all safe. The counterfeit chargers (like the $2 Apple iPad charger knock-off he tested) proved to be outright dangerous–several actually melted or caught fire in the course of the project. Hit up the link below for his detailed analysis including power output readings for the dozen chargers. A Dozen USB Chargers in the Lab [via O'Reilly Radar] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

    Read the article

  • Solutions for "Maintenance Mode"

    - by Ka Lyse
    Given a web application running across 10+ servers, what techniques have you put in place for doing things like altering the state of your website so that you can implement certain features. For instance, you might want to: Restrict Logins/Disable Certain Features Turn Site to "Read Only" Turn Site to Single "Maintenance Mode" page. Doing any of the above is pretty trivial. You can throw a particular "flag" in an .ini file, or add a row/value to a site_options table in your database and just read that value and do the appropriate thing. But these solutions have their problems. Disadvantages/Problems For instance, if you use a file for your application, and you want to switch off a certain feature temporarily, then you need to update this file on all servers. So then you might want to look at running something like ZooKeeper, but you are probably overcomplicating things. So then, you might decide that you want to store these "feature" flags in a database. But then you are obviously adding unncessary queries to each page request. So you think to yourself, that you will throw memcached in to the mix and just cache the query. Then you just retrieve all of your "Features" from memcached and add a 2ms~ latency to your application on every page. So to get around this, you decide to use a two tier-cache system, whereby you use an inmemory cache on each machine, (like Apc/Redis etc). This would work, but then it gets complicated, because you would have to set the key/hash life to perhaps 60 seconds, so that when you purge/invalidate the memcached object storing your "Features" result, your on machine cache is prompt enough to get the the new states. What suggestions might you have? Keeping in mind that optimization/efficiency is the priority here.

    Read the article

  • How do I add more than one command to /etc/rc.local?

    - by Andreas
    I want to add two power saving commands to /etc/rc.local file. This to dissable bluetooth: rfkill block bluetooth And this to reduce screen brightness: echo 3024 > /sys/class/backlight/intel_backlight/brightness Separately added to /etc/rc.local they work but not both of them together like this: #/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 3024 > /sys/class/backlight/intel_backlight/brightness rfkill block bluetooth exit 0 How do I add the two commands to get them properly executed at start-up? Update It turned out to be a timing issue. I fixed it by delaying the execution of the first command thus: (sleep 5; echo 3021 > /sys/class/backlight/intel_backlight/brightness)&

    Read the article

  • New functionality in TFS Build Manager &ndash; Managing Triggers and Build Resources

    - by Jakob Ehn
    Yesterday we pushed out a new release (August 2012) of the Community TFS Build Extension, including a new version of the Community TFS Build Manager (1.0.4.6) The two big new features in the Build Manager in this release are: Set Triggers It is now possible to select one or more build definitions and update the triggers for them in one simple operation: You’ll note that we have started collapsing the context menu a bit, the list of commands are getting long! When selecting the Trigger command, you’ll see a dialog where the options should be self-explanatory: The only thing missing here is the Scheduled trigger option, you’ll have to do that using Team Explorer for now.   Manage Build Resources The other feature is that it is now possible to view the build controllers and agents in your current collection and also perform some actions against them. The new functionality is available by select the Build Resources item in the drop down menu: Selecting this, you’ll see a (sort of) hierarchical view of the build controllers and their agents: In this view you can quickly see all the resources and their status. You can also view the build directory of each build agent and the tags that are associated with them. On the action menu, you can enable and disable both agents and controllers (several at a time), and you can also select to remove them. By selecting Manage, you’ll be presented with the standard Manage Controller dialog from Visual Studio where you can set the rest of the properties. Hopefully we’ll be able to implement most of the existing functionality so that we can remove that menu option Our plan is to add more functionality to this view, such as adding new agents/controllers, restarting build service hosts, maybe view diagnostic information such as disk space and error logs.   Hope you’ll find the new functionality useful. Remember to log any bugs and feature requests on the CodePlex site. Happy building!

    Read the article

  • Mouse selects everything on its own

    - by meneer
    I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

    Read the article

  • Internal speakers do not work

    - by Nikcefo
    I have a new (from scratch, not update) installation of Ubuntu 12.10 on my notebook, Asus A3Ac (It is based on Intel Centrino - Pentium M with full duplex Intel HDA codec). In older versions of Debian-based systems Intel HDA audio didn't work correctly. Alsamixer display wrong outputs and inputs (more than notebook really have). In clean installations internal speakers were playing, but they didn't mute when headphones was plugged in. There was a solution (propably not the best but working) - edit as root /etc/modprobe.d/alsa-base.conf and add a line "options snd-hda-intel model=z71v position_fix=1". After restart it worked correctly (alsamixer displayed correct devices and internal speakers were muted after I plugged in headphones). It was also working in Ubuntu 12.04. In Ubuntu 12.10 I have another problem. The alsamixer in default (don't have to edit alsa-base.conf) display correct outputs and inputs but internal speakers don't working if the headphones isn't plugged in. I have to manually disable "Auto-Mut" option in alsamixer, then the internal spakers works (but of course they don't mute when the headphones are pluged in). Thanks for any idea how to fix it. I'm not sure if it is a bug or it's caused by a "specific hardware". Tomas

    Read the article

  • How to Activate wifi in Toshiba Satellite C655?

    - by user4106
    I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

    Read the article

  • Agressive Auto-Updating?

    - by MattiasK
    What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >