interpret order - Page 146

Process for beginning a Ruby on Rails project

- by Daniel Beardsley

I'm about to begin a Ruby on Rails project and I'd love to hear how others go through the process of starting an application design. I have quite a bit of experience with RoR, but don't have that many starting from scratch with only a vision experiences and would appreciate the wisdom of others who've been there. I'm looking for an order of events, reasons for the order, and maybe why each part is important. I can think of a few starting points, but I'm not sure where it's best to begin Model design and relationships (entities, how they relate, and their attributes) Think of user use-cases (or story-boards) and implement the minimum to get these done Create Model unit-tests then create the necessary migrations and AR models to get the tests to pass Hack out the most basic version of the simplest part of your application and go from there Start with a template for a rails app (like http://github.com/thoughtbot/suspenders) Do the boring gruntwork first (User auth, session management, ...) ...

Read the article

Is it bad to have the <link> tag for hCard when there is no hCard on that page?

- by Evan Carroll

I'm just wondering if it is bad practice to put the <link> tag for hCard profile on every page, if you don't know that the page being rendered has an hCard. My site has hCards - is it worth trimming the link tag out of the pages that don't have them? <link rel="profile" href="http://microformats.org/profile/hcard"> Does this mean this page has an hCard or look for an hCard on this page? Does it mean interpret an hCard as specified, if found? Obviously, you can pull in stylesheets using <link> but they apply to the page. I don't even see anything at that destination other than some sub-par hCard documentation.

Read the article

Chrome vs Safari - CSS the mystery pixel

- by Aji

I have an issue of the mysterious pixel in CSS. Site in question: http://www.lymphcareri.com/about/ The idea is that under the menu is a line, which gets highlighted upon hover and blends in with the line under the header. However, Safari and Chrome both interpret the CSS different in such a way, that I cannot get those lines to line up in both browsers (no pun intended). It is either on the mark, or off. Chrome shaves off one pixel on the bottom margin of the nav link, making the line appear just above. Any idea why that is?

Read the article

Optimally reducing maximum flow

- by ArIck

Given a parameter k, I'm trying to delete k edges from a directed graph such that the maximum flow is reduced by as much as possible. The graph has a source s and a sink t, and the capacity of each edge is one. The graph may or may not contain cycles. My proposed solution would be to first perform a topological sorting on the graph, using an algorithm that "forgives" cycles -- perhaps by ignoring edges that lead us back to the source. Then (assuming k = 1): i = 0 for each vertex u order by topological(u) for each edge (u, v) order by topological(v) descending if topological(v) > topological(u) then delete (u, v) if ++i = k then return else // edge doesn't contribute to max flow, ignore Would this work, or am I totally off-track here?

Read the article

Problem with updating multiple rows which are in conflict with unique index

- by GUZ

I am using Microsoft SQL Server and I have a master-detail scenario where I need to store the order of details. So in the Detail table I have ID, MasterID, Position and some other columns. There is also a unique index on MasterID and Position. It works OK except one case: when I have some existing details and I change their order. For example when I change a detail on position 3 with a detail on position 2. When I save the detail on position 2 (which in the database has Position equal to 3) SQL Server protests, because the index uniqueness constraint. How to solve this problem in a reasonable way? Thank you in advance Lukasz Glaz

Read the article

jQuery UI get the sorted position of LI element in UL

- by PeterBZ

I'm using jQuery UI's sortable for my UL list. Each time the user sorts the list, I want each li element to update it's "position" attribute to it's position in the list. <ul> <li position="1">a</li> <li position="2">b</li> <li position="3">c</li> </ul> So when a user swaps c with a, the position will also update. I tried to use .each but it seems that javascript doesn't follow the order of how the LI elements are displayed but the order of the element's creation.

Read the article

How to compute a unicode string which bidirectional representation is specified?

- by valdo

Hello, fellows. I have a rather pervert question. Please forgive me :) There's an official algorithm that describes how bidirectional unicode text should be presented. http://www.unicode.org/reports/tr9/tr9-15.html I receive a string (from some 3rd-party source), which contains latin/hebrew characters, as well as digits, white-spaces, punctuation symbols and etc. The problem is that the string that I receive is already in the representation form. I.e. - the sequence of characters that I receive should just be presented from left to right. Now, my goal is to find the unicode string which representation is exactly the same. Means - I need to pass that string to another entity; it would then render this string according to the official algorithm, and the result should be the same. Assuming the following: The default text direction (of the rendering entity) is RTL. I don't want to inject "special unicode characters" that explicitly override the text direction (such as RLO, RLE, etc.) I suspect there may exist several solutions. If so - I'd like to preserve the RTL-looking of the string as much as possible. The string usually consists of hebrew words mostly. I'd like to preserve the correct order of those words, and characters inside those words. Whereas other character sequences may (and should) be transposed. One naive way to solve this is just to swap the whole string (this takes care of the hebrew words), and then swap inside it sequences of non-hebrew characters. This however doesn't always produce correct results, because actual rules of representation are rather complex. The only comprehensive algorithm that I see so far is brute-force check. The string can be divided into sequences of same-class characters. Those sequences may be joined in random order, plus any of them may be reversed. I can check all those combinations to obtain the correct result. Plus this technique may be optimized. For instance the order of hebrew words is known, so we only have to check different combinations of their "joining" sequences. Any better ideas? If you have an idea, not necessarily the whole solution - it's ok. I'll appreciate any idea. Thanks in advance.

Read the article

Maximum number of descendants in a B-tree

- by Phenom

If you know the order of a B-tree, how do you figure out the maximum number of descendants from a page?

Read the article

[Reloaded] Error while sorting filtered data from a GridView

- by Bogdan M

Hello guys, I have an error I cannot solve, on a ASP.NET website. One of its pages - Countries.aspx, has the following controls: a CheckBox called "CheckBoxNAME": < asp:CheckBox ID="CheckBoxNAME" runat="server" Text="Name" /> a TextBox called "TextBoxName": < asp:TextBox ID="TextBoxNAME" runat="server" Width="100%" Wrap="False"> < /asp:TextBox> a SQLDataSource called "SqlDataSourceCOUNTRIES", that selects all records from a Table with 3 columns - ID (Number, PK), NAME (Varchar2(1000)), and POPULATION (Number) called COUNTRIES < asp:SqlDataSource ID="SqlDataSourceCOUNTRIES" runat="server" ConnectionString="< %$ ConnectionStrings:myDB %> " ProviderName="< %$ ConnectionStrings:myDB.ProviderName %> " SelectCommand="SELECT COUNTRIES.ID, COUNTRIES.NAME, COUNTRIES.POPULATION FROM COUNTRIES ORDER BY COUNTRIES.NAME, COUNTRIES.ID"> < /asp:SqlDataSource> a GridView called GridViewCOUNTRIES: < asp:GridView ID="GridViewCOUNTRIES" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataSourceID="SqlDataSourceCOUNTRIES" DataKeyNames="ID" DataMember="DefaultView"> < Columns> < asp:CommandField ShowSelectButton="True" /> < asp:BoundField DataField="ID" HeaderText="Id" SortExpression="ID" /> < asp:BoundField DataField="NAME" HeaderText="Name" SortExpression="NAME" /> < asp:BoundField DataField="POPULATION" HeaderText="Population" SortExpression="POPULATION" /> < /Columns> < /asp:GridView> a Button called ButtonFilter: < asp:Button ID="ButtonFilter" runat="server" Text="Filter" onclick="ButtonFilter_Click"/> This is the onclick event: protected void ButtonFilter_Click(object sender, EventArgs e) { Response.Redirect("Countries.aspx?" + (this.CheckBoxNAME.Checked ? string.Format("NAME={0}", this.TextBoxNAME.Text) : string.Empty)); } Also, this is the main onload event of the page: protected void Page_Load(object sender, EventArgs e) { if (Page.IsPostBack == false) { if (Request.QueryString.Count != 0) { Dictionary parameters = new Dictionary(); string commandTextFormat = string.Empty; if (Request.QueryString["NAME"] != null) { if (commandTextFormat != string.Empty && commandTextFormat.EndsWith("AND") == false) { commandTextFormat += "AND"; } commandTextFormat += " (UPPER(COUNTRIES.NAME) LIKE '%' || :NAME || '%') "; parameters.Add("NAME", Request.QueryString["NAME"].ToString()); } this.SqlDataSourceCOUNTRIES.SelectCommand = string.Format("SELECT COUNTRIES.ID, COUNTRIES.NAME, COUNTRIES.POPULATION FROM COUNTRIES WHERE {0} ORDER BY COUNTRIES.NAME, COUNTRIES.ID", commandTextFormat); foreach (KeyValuePair parameter in parameters) { this.SqlDataSourceCOUNTRIES.SelectParameters.Add(parameter.Key, parameter.Value.ToUpper()); } } } } Basicly, the page displays in the GridViewCOUNTRIES all the records of table COUNTRIES. The scenario is the following: - the user checks the CheckBox; - the user types a value in the TextBox (let's say "ch"); - the user presses the Button; - the page loads displaying only the records that match the filter criteria (in this case, all the countries that have names containing "Ch"); - the user clicks on the header of the column called "Name" in order to sort the data in the GridView Then, I get the following error: ORA-01036: illegal variable name/number. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OracleClient.OracleException: ORA-01036: illegal variable name/number Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Any help is greatly appreciated, tnks. PS: I'm using ASP.NET 3.5, under Visual Studio 2008, with an OracleXE database.

Read the article

MySQL - get all unique values of a column, check if has a specific value

- by gamers2000

Read the article

php search and replace

- by Dave

I am trying to create a database field merge into a document (rtf) using php i.e if I have a document that starts Dear Sir, Customer Name: [customer_name], Date of order: [order_date] After retrieving the appropriate database record I can use a simple search and replace to insert the database field into the right place. So far so good. I would however like to have a little more control over the data before it is replaced. For example I may wish to Title Case it, or convert a delimited string into a list with carriage returns. I would therefore like to be able to add extra formatting commands to the field to be replaced. e.g. Dear Sir, Customer Name: [customer_name, TC], Date of order: [order_date, Y/M/D] There may be more than one formatting command per field. Is there a way that I can now search for these strings? The format of the strings is not set in stone, so if I have to change the format then I can. Any suggestions appreciated.

Read the article

Sort/Enumerate an NSArray from somewhere in the middle?

- by Kenny Winker

I have an NSArray, with objects ordered like so: a b c d e f I would like to enumerate through this array in this order: c d e f a b i.e. starting at some point that is not the beginning, but hitting all the items. I imagine this is a matter of sorting first and then enumerating the array, but I'm not sure if that's the best technique... or, frankly, how to sort the array like this. Edit Adding details: These will be relatively small arrays, varying from 3 to 10 objects. No concurrent access. I'd like to permanently alter the sort order of the array each time I do this operation.

Read the article

mod_rewrite not working for a specific directory

- by punkish

This has got me completely foxed for a couple of days now, and I am convinced that I will look stupid once I solve it, but will be even stupider if I don't ask for help now. I have mod_rewrite working successfully on my localhost (no vhosts involved; this is my laptop, my development machine), and I use .htaccess in various directories to help rewrite crufty URLs to clean ones. EXCEPT... it doesn't work in one directory. Since it is impossible to reproduce my entire laptop in this question, I provide the following details. In my httpd.conf, I have mod_rewrite.so loaded. LoadModule rewrite_module modules/mod_rewrite.so In my httpd.conf, I have included another conf file like so Include /usr/local/apache2/conf/other/punkish.conf In my punkish.conf, I have directories defined like so DocumentRoot "/Users/punkish/Sites" <Directory "/Users/punkish/Sites"> Options ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> <Directory "/Users/punkish/Sites/one"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <Directory "/Users/punkish/Sites/two"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> In ~/Sites/one I have the following .htaccess file RewriteEngine On RewriteBase /one/ # If an actual file or directory is requested, serve directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Otherwise, pass everything through to the dispatcher RewriteRule ^(.*)$ index.cgi/$1 [L,QSA] and, everything works just fine. However, in my directory ~/Sites/two I have the following .htaccess file RewriteEngine On RewriteBase /two/ # If an actual file or directory is requested, serve directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Otherwise, pass everything through to the dispatcher RewriteRule ^(.*)$ index.cgi/$1 [L,QSA] and, nothing works. Nada. Zip. Zilch. I just get a 404. I have determined that mod_rewrite is not even looking at my ~/Sites/two/.htaccess by putting spurious commands in it and not getting any error other than 404. Another confounding issue -- I have turned on RewriteLog in my httpd.conf with RewriteLogLevel 3, but my rewrite_log is completely empty. I know this is hard to trouble shoot unless sitting physically at the computer in question, but I hope someone can give me some indication as to what is going on. **Update: ** There are no aliases involved anywhere. This is my laptop, and everything is under the above stated Document Root, so I just access each directory as http://localhost/. Yes, typos are a big possibility (I did say that I will look stupid once I solve it, however, for now, I have not discovered a single typo anywhere, and yes, I have restarted Apache about a dozen times now. I even thought that perhaps I had two different Apaches running, but no, I have only one, the one under /usr/local/apache2, and I installed it myself a while back.

Read the article

DateTime in SqlServer VisualStudio C#

- by menacheb

Hi, I Have a DataBase in my project With Table named 'ProcessData' and columns named 'Start_At' (Type: DateTime) and 'End_At' (Type: DateTime) . When I try to enter a new record into this table, it enter the data in the following format: 'YYYY/MM/DD HH:mm', when I actualy want it to be in that format: 'YYYY/MM/DD HH:mm:ss' (the secondes dosen't apper). Does anyone know why, and what should I do in order to fix this? Here is the code I using: con = new SqlConnection("...."); String startAt = "20100413 11:05:28"; String endAt = "20100414 11:05:28"; ... con.Open();//open the connection, in order to get access to the database SqlCommand command = new SqlCommand("insert into ProcessData (Start_At, End_At) values('" + startAt + "','" + endAt + "')", con); command.ExecuteNonQuery();//execute the 'insert' query. con.Close(); Many thanks

Read the article

Is a many-to-many relationship with extra fields the right tool for my job?

- by whichhand

Previously had a go at asking a more specific version of this question, but had trouble articulating what my question was. On reflection that made me doubt if my chosen solution was correct for the problem, so this time I will explain the problem and ask if a) I am on the right track and b) if there is a way around my current brick wall. I am currently building a web interface to enable an existing database to be interrogated by (a small number of) users. Sticking with the analogy from the docs, I have models that look something like this: class Musician(models.Model): first_name = models.CharField(max_length=50) last_name = models.CharField(max_length=50) dob = models.DateField() class Album(models.Model): artist = models.ForeignKey(Musician) name = models.CharField(max_length=100) class Instrument(models.Model): artist = models.ForeignKey(Musician) name = models.CharField(max_length=100) Where I have one central table (Musician) and several tables of associated data that are related by either ForeignKey or OneToOneFields. Users interact with the database by creating filtering criteria to select a subset of Musicians based on data the data on the main or related tables. Likewise, the users can then select what piece of data is used to rank results that are presented to them. The results are then viewed initially as a 2 dimensional table with a single row per Musician with selected data fields (or aggregates) in each column. To give you some idea of scale, the database has ~5,000 Musicians with around 20 fields of related data. Up to here is fine and I have a working implementation. However, it is important that I have the ability for a given user to upload there own annotation data sets (more than one) and then filter and order on these in the same way they can with the existing data. The way I had tried to do this was to add the models: class UserDataSets(models.Model): user = models.ForeignKey(User) name = models.CharField(max_length=100) description = models.CharField(max_length=64) results = models.ManyToManyField(Musician, through='UserData') class UserData(models.Model): artist = models.ForeignKey(Musician) dataset = models.ForeignKey(UserDataSets) score = models.IntegerField() class Meta: unique_together = (("artist", "dataset"),) I have a simple upload mechanism enabling users to upload a data set file that consists of 1 to 1 relationship between a Musician and their "score". Within a given user dataset each artist will be unique, but different datasets are independent from each other and will often contain entries for the same musician. This worked fine for displaying the data, starting from a given artist I can do something like this: artist = Musician.objects.get(pk=1) dataset = UserDataSets.objects.get(pk=5) print artist.userdata_set.get(dataset=dataset.pk) However, this approach fell over when I came to implement the filtering and ordering of query set of musicians based on the data contained in a single user data set. For example, I could easily order the query set based on all of the data in the UserData table like this: artists = Musician.objects.all().order_by(userdata__score) But that does not help me order by the results of a given single user dataset. Likewise I need to be able to filter the query set based on the "scores" from different user data sets (eg find all musicians with a score 5 in dataset1 and < 2 in dataset2). Is there a way of doing this, or am I going about the whole thing wrong?

Read the article

Help using Lisp debugger

- by Joel

I'm trying understand how to interpret the output of, and use, the Lisp debugger. I've got a pretty simple Backtrace for the evaluation of my function, but I cann't seem to work out how to use it to find out in which Lisp 'form' in my function the exception occurred. I'd appreciate any clues as to what I should be doing, to find the source of the error. I've attached a screen shot (if it's too small to read I can re-post it in parts), with the debug output, the function and the repl (please ignore my very wrong function, I'm just interested in learning how to use the debugger properly). In addition, I hit 'v' on the first frame to go to the source, but this resulted in the error at the bottom of the screen.

Read the article

Grab triangles within a lower triangle

- by Tyler Rinker

I have the need to grab all the thee element triangles that make up the lower triangle of a symmetric matrix. I can not think of how to grab all these pieces in the order of far left column working down and then next column to the right and so on. I know that the numbe rof mini triangles inside of the lower triangle is: n = x(x - 1)/2 where: x = nrow(mats[[i]]) Here I've created three matrices with letters (it's easier for me to conceptualize this way) and the elements in the order I'm looking for: FUN <- function(n) { matrix(LETTERS[1:(n*n)], n) } mats <- lapply(3:5, FUN) So this is the output I'd like to get (I put it in code rather than output format) for each of the matrices created above: list(c("B", "C", "F")) list(c("B", "C", "G"), c("C", "D", "H"), c("G", "H", "L")) list(c("B", "C", "H"), c("C", "D", "I"), c("D", "E", "J"), c("H", "I", "N"), c("I", "J", "O"), c("N", "O", "T")) How can I do this task in the fastest manner possible while staying in base R? Not sure if this visual of what I'm after is helpful but it may be:

Read the article

how to add column in SQL Query that incl. LEFT OUTER JOIN

- by radbyx

I have this Query: SELECT p.ProductName, dt.MaxTimeStamp, p.Responsible FROM Product p LEFT JOIN (SELECT ProductID, MAX(TimeStamp) AS MaxTimeStamp FROM StateLog WHERE State = 0 GROUP BY ProductID, Status) dt ON p.ProductID = dt.ProductID ORDER BY p.ProductName; It works like it should, but now I need to SELECT "State" out too. The tricky part is, that I only want the lastest "TimeStamp" where "State" was false. But now I also need the "State" for the lastest "TimeStamp". I tried this: SELECT p.ProductName, dt.State, dt.MaxTimeStamp, p.Responsible FROM Product p LEFT JOIN (SELECT ProductID, MAX(TimeStamp) AS MaxTimeStamp, State FROM StateLog WHERE State = 0 GROUP BY ProductID, Status) dt ON p.ProductID =dt.ProductID ORDER BY p.ProductName; But it didn't work, because it gave me the "State" for the lastest "TimeStamp". So I hope there is some clever heads out there that can help me. I'm guessing that this is either very simple or very hard to solve.

Read the article

Dataset and Hierarchial Data How to Sort

- by mdjtlj

This is probably a dumb question, but I've hit a wall with this one at this current time. I have some data which is hierarchial in nature which is in an ADO.NEt dataset. The first field is the ID, the second is the Name, the third is the Parent ID. ID NAME Parent ID 1 Air Handling NULL 2 Compressor 1 3 Motor 4 4 Compressor 1 5 Motor 2 6 Controller 4 7 Controller 2 So the tree would look like the following: 1- Air Handling 4- Compressor 6 - Controller 3 - Motor 2- Compressor 7- Controller 5 - Motor What I'm trying to figure our is how to get the dataset in the same order that ths would be viewed in a treeview, which in this case is the levels at the appropriate levels for the nodes and then the children at the appropriate levels sorted by the name. It would be like binding this to a treeview and then simply working your way down the nodes to get the right order. Any links or direction would be greatly appreciated.

Read the article

Navigation properties not set when using ADO.NET Mocking Context Generator

- by olenak

I am using ADO.NET Mocking Context Generator plugin for my Entity Framework model. I have not started on using mocks yet, just trying to fix generated entity and context classes to make application run as before without exceptions. I've already fixed T4 template to support SaveChanges method. Now I've got another problem: when I try to access any navigation property it is set to null. All the primitive fields inherited from DB table are set and correct. So what I am doing is the following using (var context = MyContext()) { var order = context.Orders.Where(p => p.Id == 7); var product = order.Products; } in this case product is set to null. But that was not a case while using default code generator, it used to return real product object. Thanks ahead for any suggestions!

Read the article

how to reverse fill each entity of byte array?

- by moon

i want to prepare a byte buffer as a upd packet i want to fill each value in reverse order how can i do so in ansi c

Read the article

Postgresql count+sort performance

- by invictus

I have built a small inventory system using postgresql and psycopg2. Everything works great, except, when I want to create aggregated summaries/reports of the content, I get really bad performance due to count()'ing and sorting. The DB schema is as follows: CREATE TABLE hosts ( id SERIAL PRIMARY KEY, name VARCHAR(255) ); CREATE TABLE items ( id SERIAL PRIMARY KEY, description TEXT ); CREATE TABLE host_item ( id SERIAL PRIMARY KEY, host INTEGER REFERENCES hosts(id) ON DELETE CASCADE ON UPDATE CASCADE, item INTEGER REFERENCES items(id) ON DELETE CASCADE ON UPDATE CASCADE ); There are some other fields as well, but those are not relevant. I want to extract 2 different reports: - List of all hosts with the number of items per, ordered from highest to lowest count - List of all items with the number of hosts per, ordered from highest to lowest count I have used 2 queries for the purpose: Items with host count: SELECT i.id, i.description, COUNT(hi.id) AS count FROM items AS i LEFT JOIN host_item AS hi ON (i.id=hi.item) GROUP BY i.id ORDER BY count DESC LIMIT 10; Hosts with item count: SELECT h.id, h.name, COUNT(hi.id) AS count FROM hosts AS h LEFT JOIN host_item AS hi ON (h.id=hi.host) GROUP BY h.id ORDER BY count DESC LIMIT 10; Problem is: the queries runs for 5-6 seconds before returning any data. As this is a web based application, 6 seconds are just not acceptable. The database is heavily populated with approximately 50k hosts, 1000 items and 400 000 host/items relations, and will likely increase significantly when (or perhaps if) the application will be used. After playing around, I found that by removing the "ORDER BY count DESC" part, both queries would execute instantly without any delay whatsoever (less than 20ms to finish the queries). Is there any way I can optimize these queries so that I can get the result sorted without the delay? I was trying different indexes, but seeing as the count is computed it is possible to utilize an index for this. I have read that count()'ing in postgresql is slow, but its the sorting that are causing me problems... My current workaround is to run the queries above as an hourly job, putting the result into a new table with an index on the count column for quick lookup. I use Postgresql 9.2.

Read the article

Interesting Row_Number() bug

- by Joel Coehoorn

I was playing with the Stack Exchange Data Explorer and ran this query: http://odata.stackexchange.com/stackoverflow/q/2828/rising-stars-top-50-users-ordered-on-rep-per-day Notice down in the results, rows 11 and 12 have the same value and so are mis-numbered, even though the row_number() function takes the same order by parameter as the query. I know the correct fix here is to specify an additional tie-breaker column in the order by clauses, but I'm more curious as to why/how the row_number() function returned different results on the same data? If it makes a difference anywhere, this runs on Azure.

Read the article

nicely display file rename history in git log

- by Jian

The git command git log --format='%H' --follow -- foo.txt will give you the series of commits that touch foo.txt, following it across renames. I'm wondering if there's a git log command that will also print the corresponding historical file name beside each commit. It would be something like this, where we can interpret '%F' to be the (actually non-existent) placeholder for filename. git log --format='%H %F' --follow -- foo.txt I know this could be accomplished with git log --format='%H' --follow --numstat -- foo.txt but the output is not ideal since it requires some non-trivial parsing; each commit is strewn across multiple lines, and you'll still need to parse the file rename syntax ("bar.txt => foo.txt") to find what you're looking for.

Read the article

How can I possibly sort this in JavaScript?

- by orokusaki

I've been pounding my head on the wall trying to figure out how to sort this in JavaScript (I have to work with it in this format unfortunately). I need to sort it based on Small, Medium, Large, XL, XXL (Small ranking the highest) in each variationValues size field. The problem is that I need to sort the variationCosts and variationInventories at the same time to match the new order (since each value in order corresponds to the values in the other fields :( Input I have to work with var m = { variationNames: ["Length", "Size" ], variationValues: [ ["26.5\"", "XXL"], ["25\"", "Large"], ["25\"", "Medium"], ["25\"", "Small"], ["25\"", "XL"], ["25\"", "XXL"], ["26.5\"", "Large"], ["26.5\"", "Small"], ["26.5\"", "XL"] ], variationCosts: [ 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00 ], variationInventories: [ 10, 60, 51, 10, 15, 10, 60, 10, 15 ], parentCost: 20.00 }; Desired output var m = { variationNames: ["Length", "Size" ], variationValues: [ ["25\"", "Small"], ["26.5\"", "Small"], ["25\"", "Medium"], ["25\"", "Large"], ["26.5\"", "Large"], ["25\"", "XL"], ["26.5\"", "XL"] ["25\"", "XXL"], ["26.5\"", "XXL"], ], variationCosts: [ 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00 ], variationInventories: [ 10, 10, 51, 60, 15, 15, 15, 10, 10 ], parentCost: 20.00 };

Search Results

Search found 18329 results on 734 pages for 'interpret order'.

Page 146/734 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153 | Next Page >

- by Daniel Beardsley

- by Evan Carroll

- by Aji

- by ArIck

- by GUZ

- by PeterBZ

- by valdo

- by Phenom

- by Bogdan M

- by gamers2000

- by Dave

- by Kenny Winker

- by punkish

- by menacheb

- by whichhand

- by Joel

- by Tyler Rinker

- by radbyx

- by mdjtlj

- by olenak

- by moon

- by invictus

- by Joel Coehoorn

- by Jian

- by orokusaki

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153 | Next Page >