Search Results

Search found 4448 results on 178 pages for 'kernel'.

Page 146/178 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• Alternate way to create a clone of a UNIX System

  - by Spirit

  THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

  Read the article

• How do I prevent TCP connection freezes over an OpenVPN network?

  - by Jason R

  New details added at the end of this question; it's possible that I'm zeroing in on the cause. I have a UDP OpenVPN-based VPN set up in tap mode (I need tap because I need the VPN to pass multicast packets, which doesn't seem to be possible with tun networks) with a handful of clients across the Internet. I've been experiencing frequent TCP connection freezes over the VPN. That is, I will establish a TCP connection (e.g. an SSH connection, but other protocols have similar issues), and at some point during the session, it seems that traffic will cease being transmitted over that TCP session. This seems to be related to points at which large data transfers occur, such as if I execute an ls command in an SSH session, or if I cat a long log file. Some Google searches turn up a number of answers like this previous one on Server Fault, indicating that the likely culprit is an MTU issue: that during periods of high traffic, the VPN is trying to send packets that get dropped somewhere in the pipes between the VPN endpoints. The above-linked answer suggests using the following OpenVPN configuration settings to mitigate the problem: fragment 1400 mssfix This should limit the MTU used on the VPN to 1400 bytes and fix the TCP maximum segment size to prevent the generation of any packets larger than that. This seems to mitigate the problem a bit, but I still frequently see the freezes. I've tried a number of sizes as arguments to the fragment directive: 1200, 1000, 576, all with similar results. I can't think of any strange network topology between the two ends that could trigger such a problem: the VPN server is running on a pfSense machine connected directly to the Internet, and my client is also connected directly to the Internet at another location. One other strange piece of the puzzle: if I run the tracepath utility, then that seems to band-aid the problem. A sample run looks like: [~]$ tracepath -n 192.168.100.91 1: 192.168.100.90 0.039ms pmtu 1500 1: 192.168.100.91 40.823ms reached 1: 192.168.100.91 19.846ms reached Resume: pmtu 1500 hops 1 back 64 The above run is between two clients on the VPN: I initiated the trace from 192.168.100.90 to the destination of 192.168.100.91. Both clients were configured with fragment 1200; mssfix; in an attempt to limit the MTU used on the link. The above results would seem to suggest that tracepath was able to detect a path MTU of 1500 bytes between the two clients. I would assume that it would be somewhat smaller due to the fragmentation settings specified in the OpenVPN configuration. I found that result somewhat strange. Even stranger, however: if I have a TCP connection in the stalled state (e.g. an SSH session with a directory listing that froze in the middle), then executing the tracepath command shown above causes the connection to start up again! I can't figure out any reasonable explanation for why this would be the case, but I feel like this might be pointing toward a solution to ultimately eradicate the problem. Does anyone have any recommendations for other things to try? Edit: I've come back and looked at this a bit further, and have found only more confounding information: I set the OpenVPN connection to fragment at 1400 bytes, as shown above. Then, I connected to the VPN from across the Internet and used Wireshark to look at the UDP packets that were sent to the VPN server while the stall occurred. None were greater than the specified 1400 byte count, so the fragmentation seems to be functioning properly. To verify that even a 1400-byte MTU would be sufficient, I pinged the VPN server using the following (Linux) command: ping <host> -s 1450 -M do This (I believe) sends a 1450-byte packet with fragmentation disabled (I at least verified that it didn't work if I set it to an obviously-too-large value like 1600 bytes). These seem to work just fine; I get replies back from the host with no issue. So, maybe this isn't an MTU issue at all. I'm just confused as to what else it might be! Edit 2: The rabbit hole just keeps getting deeper: I've now isolated the problem a bit more. It seems to be related to the exact OS that the VPN client uses. I have successfully duplicated the problem on at least three Ubuntu machines (versions 12.04 through 13.04). I can reliably duplicate an SSH connection freeze within a minute or so by just cat-ing a large log file. However, if I do the same test using a CentOS 6 machine as a client, then I don't see the problem! I've tested using the exact same OpenVPN client version as I was using on the Ubuntu machines. I can cat log files for hours without seeing the connection freeze. This seems to provide some insight as to the ultimate cause, but I'm just not sure what that insight is. I have examined the traffic over the VPN using Wireshark. I'm not a TCP expert, so I'm not sure what to make of the gory details, but the gist is that at some point, a UDP packet gets dropped due to the limited bandwidth of the Internet link, causing TCP retransmissions inside the VPN tunnel. On the CentOS client, these retransmissions occur properly and things move on happily. At some point with the Ubuntu clients, though, the remote end starts retransmitting the same TCP segment over and over (with the transmit delay increasing between each retransmission). The client sends what looks like a valid TCP ACK to each retransmission, but the remote end still continues to transmit the same TCP segment periodically. This extends ad infinitum and the connection stalls. My question here would be: Does anyone have any recommendations for how to troubleshoot and/or determine the root cause of the TCP issue? It's as if the remote end isn't accepting the ACK messages sent by the VPN client. One common difference between the CentOS node and the various Ubuntu releases is that Ubuntu has a much more recent Linux kernel version (from 3.2 in Ubuntu 12.04 to 3.8 in 13.04). A pointer to some new kernel bug maybe? I'm assuming that if that were so, then I wouldn't be the only one experiencing the problem; I don't think this seems like a particularly exotic setup.

  Read the article

• The Oracle Enterprise Linux Software and Hardware Ecosystem

  - by sergio.leunissen

  It's been nearly four years since we launched the Unbreakable Linux support program and with it the free Oracle Enterprise Linux software. Since then, we've built up an extensive ecosystem of hardware and software partners. Oracle works directly with these vendors to ensure joint customers can run Oracle Enterprise Linux. As Oracle Enterprise Linux is fully--both source and binary--compatible with Red Hat Enterprise Linux (RHEL), there is minimal work involved for software and hardware vendors to test their products with it. We develop our software on Oracle Enterprise Linux and perform full certification testing on Oracle Enterprise Linux as well. Due to the compatibility between Oracle Enterprise Linux and RHEL, Oracle also certifies its software for use on RHEL, without any additional testing. Oracle Enterprise Linux tracks RHEL by publishing freely downloadable installation media on edelivery.oracle.com/linux and updates, bug fixes and security errata on Unbreakable Linux Network (ULN). At the same time, Oracle's Linux kernel team is shaping the future of enterprise Linux distributions by developing technologies and features that matter to customers who deploy Linux in the data center, including file systems, memory management, high performance computing, data integrity and virtualization. All this work is contributed to the Linux and Xen communities. The list below is a sample of the partners who have certified their products with Oracle Enterprise Linux. If you're interested in certifying your software or hardware with Oracle Enterprise Linux, please contact us via [email protected] Chip Manufacturers Intel, Intel Enabled Server Acceleration Alliance AMD Server vendors Cisco Unified Computing System Dawning Dell Egenera Fujitsu HP Huawei IBM NEC Sun/Oracle Storage Systems, Volume Management and File Systems 3Par Compellent EMC VPLEX FalconStor Fusion-io Hitachi Data Systems HP Storage Array Systems Lustre Network Appliance OCFS2 PillarData Symantec Veritas Storage Foundation Networking: Switches, Host Bus Adapters (HBAs), Converged Network Adapters (CNAs), InfiniBand Brocade Emulex Mellanox QLogic Voltaire SOA and Middleware ActiveState ActivePerl, ActivePython Tibco Zend Backup, Recovery & Replication Arkeia Network Backup Suite BakBone NetVault CommVault Simpana 8 EMC Networker, Replication Manager FalconStor Continuous Data Protector HP Data Protector NetApp Snapmanager Quest LiteSpeed Engine Steeleye Data Replication, Disaster Recovery Symantec NetBackup, Veritas Volume Replicator, Symantec Backup Exec Zmanda Amanda Enterprise Data Center Automation BMC CA Unicenter HP Server Automation (formerly Opsware), System Management Homepage Oracle Enterprise Manager Ops Center Quest Vizioncore vFoglight Pro TeamQuest Manager Clustering & High Availability FUJITSU x10sure NEC Express Cluster X Steeleye Lifekeeper Symantec Cluster Server Univa UniCluster Virtualization Platforms and Cloud Providers Amazon EC2 Citrix XenServer Rackspace Cloud VirtualBox VMWare ESX Security Management ArcSight: Enterprise Security Manager, Logger CA Access Control Centrify Suite Ecora Auditor FoxT Manager Likewise: Unix Account Management Lumension Endpoint Management and Security Suite QualysGuard Suite Quest Privilege Manager McAfee Application Control, Change ControlIntegrity Monitor, Integrity Control, PCI Pro Solidcore S3 Symantec Enterprise Security Manager (ESM) Tripwire Trusted Computer Solutions

  Read the article

• Toorcon 15 (2013)

  - by danx

  The Toorcon gang (senior staff): h1kari (founder), nfiltr8, and Geo Introduction to Toorcon 15 (2013) A Tale of One Software Bypass of MS Windows 8 Secure Boot Breaching SSL, One Byte at a Time Running at 99%: Surviving an Application DoS Security Response in the Age of Mass Customized Attacks x86 Rewriting: Defeating RoP and other Shinanighans Clowntown Express: interesting bugs and running a bug bounty program Active Fingerprinting of Encrypted VPNs Making Attacks Go Backwards Mask Your Checksums—The Gorry Details Adventures with weird machines thirty years after "Reflections on Trusting Trust" Introduction to Toorcon 15 (2013) Toorcon 15 is the 15th annual security conference held in San Diego. I've attended about a third of them and blogged about previous conferences I attended here starting in 2003. As always, I've only summarized the talks I attended and interested me enough to write about them. Be aware that I may have misrepresented the speaker's remarks and that they are not my remarks or opinion, or those of my employer, so don't quote me or them. Those seeking further details may contact the speakers directly or use The Google. For some talks, I have a URL for further information. A Tale of One Software Bypass of MS Windows 8 Secure Boot Andrew Furtak and Oleksandr Bazhaniuk Yuri Bulygin, Oleksandr ("Alex") Bazhaniuk, and (not present) Andrew Furtak Yuri and Alex talked about UEFI and Bootkits and bypassing MS Windows 8 Secure Boot, with vendor recommendations. They previously gave this talk at the BlackHat 2013 conference. MS Windows 8 Secure Boot Overview UEFI (Unified Extensible Firmware Interface) is interface between hardware and OS. UEFI is processor and architecture independent. Malware can replace bootloader (bootx64.efi, bootmgfw.efi). Once replaced can modify kernel. Trivial to replace bootloader. Today many legacy bootkits—UEFI replaces them most of them. MS Windows 8 Secure Boot verifies everything you load, either through signatures or hashes. UEFI firmware relies on secure update (with signed update). You would think Secure Boot would rely on ROM (such as used for phones0, but you can't do that for PCs—PCs use writable memory with signatures DXE core verifies the UEFI boat loader(s) OS Loader (winload.efi, winresume.efi) verifies the OS kernel A chain of trust is established with a root key (Platform Key, PK), which is a cert belonging to the platform vendor. Key Exchange Keys (KEKs) verify an "authorized" database (db), and "forbidden" database (dbx). X.509 certs with SHA-1/SHA-256 hashes. Keys are stored in non-volatile (NV) flash-based NVRAM. Boot Services (BS) allow adding/deleting keys (can't be accessed once OS starts—which uses Run-Time (RT)). Root cert uses RSA-2048 public keys and PKCS#7 format signatures. SecureBoot — enable disable image signature checks SetupMode — update keys, self-signed keys, and secure boot variables CustomMode — allows updating keys Secure Boot policy settings are: always execute, never execute, allow execute on security violation, defer execute on security violation, deny execute on security violation, query user on security violation Attacking MS Windows 8 Secure Boot Secure Boot does NOT protect from physical access. Can disable from console. Each BIOS vendor implements Secure Boot differently. There are several platform and BIOS vendors. It becomes a "zoo" of implementations—which can be taken advantage of. Secure Boot is secure only when all vendors implement it correctly. Allow only UEFI firmware signed updates protect UEFI firmware from direct modification in flash memory protect FW update components program SPI controller securely protect secure boot policy settings in nvram protect runtime api disable compatibility support module which allows unsigned legacy Can corrupt the Platform Key (PK) EFI root certificate variable in SPI flash. If PK is not found, FW enters setup mode wich secure boot turned off. Can also exploit TPM in a similar manner. One is not supposed to be able to directly modify the PK in SPI flash from the OS though. But they found a bug that they can exploit from User Mode (undisclosed) and demoed the exploit. It loaded and ran their own bootkit. The exploit requires a reboot. Multiple vendors are vulnerable. They will disclose this exploit to vendors in the future. Recommendations: allow only signed updates protect UEFI fw in ROM protect EFI variable store in ROM Breaching SSL, One Byte at a Time Yoel Gluck and Angelo Prado Angelo Prado and Yoel Gluck, Salesforce.com CRIME is software that performs a "compression oracle attack." This is possible because the SSL protocol doesn't hide length, and because SSL compresses the header. CRIME requests with every possible character and measures the ciphertext length. Look for the plaintext which compresses the most and looks for the cookie one byte-at-a-time. SSL Compression uses LZ77 to reduce redundancy. Huffman coding replaces common byte sequences with shorter codes. US CERT thinks the SSL compression problem is fixed, but it isn't. They convinced CERT that it wasn't fixed and they issued a CVE. BREACH, breachattrack.com BREACH exploits the SSL response body (Accept-Encoding response, Content-Encoding). It takes advantage of the fact that the response is not compressed. BREACH uses gzip and needs fairly "stable" pages that are static for ~30 seconds. It needs attacker-supplied content (say from a web form or added to a URL parameter). BREACH listens to a session's requests and responses, then inserts extra requests and responses. Eventually, BREACH guesses a session's secret key. Can use compression to guess contents one byte at-a-time. For example, "Supersecret SupersecreX" (a wrong guess) compresses 10 bytes, and "Supersecret Supersecret" (a correct guess) compresses 11 bytes, so it can find each character by guessing every character. To start the guess, BREACH needs at least three known initial characters in the response sequence. Compression length then "leaks" information. Some roadblocks include no winners (all guesses wrong) or too many winners (multiple possibilities that compress the same). The solutions include: lookahead (guess 2 or 3 characters at-a-time instead of 1 character). Expensive rollback to last known conflict check compression ratio can brute-force first 3 "bootstrap" characters, if needed (expensive) block ciphers hide exact plain text length. Solution is to align response in advance to block size Mitigations length: use variable padding secrets: dynamic CSRF tokens per request secret: change over time separate secret to input-less servlets Future work eiter understand DEFLATE/GZIP HTTPS extensions Running at 99%: Surviving an Application DoS Ryan Huber Ryan Huber, Risk I/O Ryan first discussed various ways to do a denial of service (DoS) attack against web services. One usual method is to find a slow web page and do several wgets. Or download large files. Apache is not well suited at handling a large number of connections, but one can put something in front of it Can use Apache alternatives, such as nginx How to identify malicious hosts short, sudden web requests user-agent is obvious (curl, python) same url requested repeatedly no web page referer (not normal) hidden links. hide a link and see if a bot gets it restricted access if not your geo IP (unless the website is global) missing common headers in request regular timing first seen IP at beginning of attack count requests per hosts (usually a very large number) Use of captcha can mitigate attacks, but you'll lose a lot of genuine users. Bouncer, goo.gl/c2vyEc and www.github.com/rawdigits/Bouncer Bouncer is software written by Ryan in netflow. Bouncer has a small, unobtrusive footprint and detects DoS attempts. It closes blacklisted sockets immediately (not nice about it, no proper close connection). Aggregator collects requests and controls your web proxies. Need NTP on the front end web servers for clean data for use by bouncer. Bouncer is also useful for a popularity storm ("Slashdotting") and scraper storms. Future features: gzip collection data, documentation, consumer library, multitask, logging destroyed connections. Takeaways: DoS mitigation is easier with a complete picture Bouncer designed to make it easier to detect and defend DoS—not a complete cure Security Response in the Age of Mass Customized Attacks Peleus Uhley and Karthik Raman Peleus Uhley and Karthik Raman, Adobe ASSET, blogs.adobe.com/asset/ Peleus and Karthik talked about response to mass-customized exploits. Attackers behave much like a business. "Mass customization" refers to concept discussed in the book Future Perfect by Stan Davis of Harvard Business School. Mass customization is differentiating a product for an individual customer, but at a mass production price. For example, the same individual with a debit card receives basically the same customized ATM experience around the world. Or designing your own PC from commodity parts. Exploit kits are another example of mass customization. The kits support multiple browsers and plugins, allows new modules. Exploit kits are cheap and customizable. Organized gangs use exploit kits. A group at Berkeley looked at 77,000 malicious websites (Grier et al., "Manufacturing Compromise: The Emergence of Exploit-as-a-Service", 2012). They found 10,000 distinct binaries among them, but derived from only a dozen or so exploit kits. Characteristics of Mass Malware: potent, resilient, relatively low cost Technical characteristics: multiple OS, multipe payloads, multiple scenarios, multiple languages, obfuscation Response time for 0-day exploits has gone down from ~40 days 5 years ago to about ~10 days now. So the drive with malware is towards mass customized exploits, to avoid detection There's plenty of evicence that exploit development has Project Manager bureaucracy. They infer from the malware edicts to: support all versions of reader support all versions of windows support all versions of flash support all browsers write large complex, difficult to main code (8750 lines of JavaScript for example Exploits have "loose coupling" of multipe versions of software (adobe), OS, and browser. This allows specific attacks against specific versions of multiple pieces of software. Also allows exploits of more obscure software/OS/browsers and obscure versions. Gave examples of exploits that exploited 2, 3, 6, or 14 separate bugs. However, these complete exploits are more likely to be buggy or fragile in themselves and easier to defeat. Future research includes normalizing malware and Javascript. Conclusion: The coming trend is that mass-malware with mass zero-day attacks will result in mass customization of attacks. x86 Rewriting: Defeating RoP and other Shinanighans Richard Wartell Richard Wartell The attack vector we are addressing here is: First some malware causes a buffer overflow. The malware has no program access, but input access and buffer overflow code onto stack Later the stack became non-executable. The workaround malware used was to write a bogus return address to the stack jumping to malware Later came ASLR (Address Space Layout Randomization) to randomize memory layout and make addresses non-deterministic. The workaround malware used was to jump t existing code segments in the program that can be used in bad ways "RoP" is Return-oriented Programming attacks. RoP attacks use your own code and write return address on stack to (existing) expoitable code found in program ("gadgets"). Pinkie Pie was paid $60K last year for a RoP attack. One solution is using anti-RoP compilers that compile source code with NO return instructions. ASLR does not randomize address space, just "gadgets". IPR/ILR ("Instruction Location Randomization") randomizes each instruction with a virtual machine. Richard's goal was to randomize a binary with no source code access. He created "STIR" (Self-Transofrming Instruction Relocation). STIR disassembles binary and operates on "basic blocks" of code. The STIR disassembler is conservative in what to disassemble. Each basic block is moved to a random location in memory. Next, STIR writes new code sections with copies of "basic blocks" of code in randomized locations. The old code is copied and rewritten with jumps to new code. the original code sections in the file is marked non-executible. STIR has better entropy than ASLR in location of code. Makes brute force attacks much harder. STIR runs on MS Windows (PEM) and Linux (ELF). It eliminated 99.96% or more "gadgets" (i.e., moved the address). Overhead usually 5-10% on MS Windows, about 1.5-4% on Linux (but some code actually runs faster!). The unique thing about STIR is it requires no source access and the modified binary fully works! Current work is to rewrite code to enforce security policies. For example, don't create a *.{exe,msi,bat} file. Or don't connect to the network after reading from the disk. Clowntown Express: interesting bugs and running a bug bounty program Collin Greene Collin Greene, Facebook Collin talked about Facebook's bug bounty program. Background at FB: FB has good security frameworks, such as security teams, external audits, and cc'ing on diffs. But there's lots of "deep, dark, forgotten" parts of legacy FB code. Collin gave several examples of bountied bugs. Some bounty submissions were on software purchased from a third-party (but bounty claimers don't know and don't care). We use security questions, as does everyone else, but they are basically insecure (often easily discoverable). Collin didn't expect many bugs from the bounty program, but they ended getting 20+ good bugs in first 24 hours and good submissions continue to come in. Bug bounties bring people in with different perspectives, and are paid only for success. Bug bounty is a better use of a fixed amount of time and money versus just code review or static code analysis. The Bounty program started July 2011 and paid out $1.5 million to date. 14% of the submissions have been high priority problems that needed to be fixed immediately. The best bugs come from a small % of submitters (as with everything else)—the top paid submitters are paid 6 figures a year. Spammers like to backstab competitors. The youngest sumitter was 13. Some submitters have been hired. Bug bounties also allows to see bugs that were missed by tools or reviews, allowing improvement in the process. Bug bounties might not work for traditional software companies where the product has release cycle or is not on Internet. Active Fingerprinting of Encrypted VPNs Anna Shubina Anna Shubina, Dartmouth Institute for Security, Technology, and Society (I missed the start of her talk because another track went overtime. But I have the DVD of the talk, so I'll expand later) IPsec leaves fingerprints. Using netcat, one can easily visually distinguish various crypto chaining modes just from packet timing on a chart (example, DES-CBC versus AES-CBC) One can tell a lot about VPNs just from ping roundtrips (such as what router is used) Delayed packets are not informative about a network, especially if far away from the network More needed to explore about how TCP works in real life with respect to timing Making Attacks Go Backwards Fuzzynop FuzzyNop, Mandiant This talk is not about threat attribution (finding who), product solutions, politics, or sales pitches. But who are making these malware threats? It's not a single person or group—they have diverse skill levels. There's a lot of fat-fingered fumblers out there. Always look for low-hanging fruit first: "hiding" malware in the temp, recycle, or root directories creation of unnamed scheduled tasks obvious names of files and syscalls ("ClearEventLog") uncleared event logs. Clearing event log in itself, and time of clearing, is a red flag and good first clue to look for on a suspect system Reverse engineering is hard. Disassembler use takes practice and skill. A popular tool is IDA Pro, but it takes multiple interactive iterations to get a clean disassembly. Key loggers are used a lot in targeted attacks. They are typically custom code or built in a backdoor. A big tip-off is that non-printable characters need to be printed out (such as "[Ctrl]" "[RightShift]") or time stamp printf strings. Look for these in files. Presence is not proof they are used. Absence is not proof they are not used. Java exploits. Can parse jar file with idxparser.py and decomile Java file. Java typially used to target tech companies. Backdoors are the main persistence mechanism (provided externally) for malware. Also malware typically needs command and control. Application of Artificial Intelligence in Ad-Hoc Static Code Analysis John Ashaman John Ashaman, Security Innovation Initially John tried to analyze open source files with open source static analysis tools, but these showed thousands of false positives. Also tried using grep, but tis fails to find anything even mildly complex. So next John decided to write his own tool. His approach was to first generate a call graph then analyze the graph. However, the problem is that making a call graph is really hard. For example, one problem is "evil" coding techniques, such as passing function pointer. First the tool generated an Abstract Syntax Tree (AST) with the nodes created from method declarations and edges created from method use. Then the tool generated a control flow graph with the goal to find a path through the AST (a maze) from source to sink. The algorithm is to look at adjacent nodes to see if any are "scary" (a vulnerability), using heuristics for search order. The tool, called "Scat" (Static Code Analysis Tool), currently looks for C# vulnerabilities and some simple PHP. Later, he plans to add more PHP, then JSP and Java. For more information see his posts in Security Innovation blog and NRefactory on GitHub. Mask Your Checksums—The Gorry Details Eric (XlogicX) Davisson Eric (XlogicX) Davisson Sometimes in emailing or posting TCP/IP packets to analyze problems, you may want to mask the IP address. But to do this correctly, you need to mask the checksum too, or you'll leak information about the IP. Problem reports found in stackoverflow.com, sans.org, and pastebin.org are usually not masked, but a few companies do care. If only the IP is masked, the IP may be guessed from checksum (that is, it leaks data). Other parts of packet may leak more data about the IP. TCP and IP checksums both refer to the same data, so can get more bits of information out of using both checksums than just using one checksum. Also, one can usually determine the OS from the TTL field and ports in a packet header. If we get hundreds of possible results (16x each masked nibble that is unknown), one can do other things to narrow the results, such as look at packet contents for domain or geo information. With hundreds of results, can import as CSV format into a spreadsheet. Can corelate with geo data and see where each possibility is located. Eric then demoed a real email report with a masked IP packet attached. Was able to find the exact IP address, given the geo and university of the sender. Point is if you're going to mask a packet, do it right. Eric wouldn't usually bother, but do it correctly if at all, to not create a false impression of security. Adventures with weird machines thirty years after "Reflections on Trusting Trust" Sergey Bratus Sergey Bratus, Dartmouth College (and Julian Bangert and Rebecca Shapiro, not present) "Reflections on Trusting Trust" refers to Ken Thompson's classic 1984 paper. "You can't trust code that you did not totally create yourself." There's invisible links in the chain-of-trust, such as "well-installed microcode bugs" or in the compiler, and other planted bugs. Thompson showed how a compiler can introduce and propagate bugs in unmodified source. But suppose if there's no bugs and you trust the author, can you trust the code? Hell No! There's too many factors—it's Babylonian in nature. Why not? Well, Input is not well-defined/recognized (code's assumptions about "checked" input will be violated (bug/vunerabiliy). For example, HTML is recursive, but Regex checking is not recursive. Input well-formed but so complex there's no telling what it does For example, ELF file parsing is complex and has multiple ways of parsing. Input is seen differently by different pieces of program or toolchain Any Input is a program input executes on input handlers (drives state changes & transitions) only a well-defined execution model can be trusted (regex/DFA, PDA, CFG) Input handler either is a "recognizer" for the inputs as a well-defined language (see langsec.org) or it's a "virtual machine" for inputs to drive into pwn-age ELF ABI (UNIX/Linux executible file format) case study. Problems can arise from these steps (without planting bugs): compiler linker loader ld.so/rtld relocator DWARF (debugger info) exceptions The problem is you can't really automatically analyze code (it's the "halting problem" and undecidable). Only solution is to freeze code and sign it. But you can't freeze everything! Can't freeze ASLR or loading—must have tables and metadata. Any sufficiently complex input data is the same as VM byte code Example, ELF relocation entries + dynamic symbols == a Turing Complete Machine (TM). @bxsays created a Turing machine in Linux from relocation data (not code) in an ELF file. For more information, see Rebecca "bx" Shapiro's presentation from last year's Toorcon, "Programming Weird Machines with ELF Metadata" @bxsays did same thing with Mach-O bytecode Or a DWARF exception handling data .eh_frame + glibc == Turning Machine X86 MMU (IDT, GDT, TSS): used address translation to create a Turning Machine. Page handler reads and writes (on page fault) memory. Uses a page table, which can be used as Turning Machine byte code. Example on Github using this TM that will fly a glider across the screen Next Sergey talked about "Parser Differentials". That having one input format, but two parsers, will create confusion and opportunity for exploitation. For example, CSRs are parsed during creation by cert requestor and again by another parser at the CA. Another example is ELF—several parsers in OS tool chain, which are all different. Can have two different Program Headers (PHDRs) because ld.so parses multiple PHDRs. The second PHDR can completely transform the executable. This is described in paper in the first issue of International Journal of PoC. Conclusions trusting computers not only about bugs! Bugs are part of a problem, but no by far all of it complex data formats means bugs no "chain of trust" in Babylon! (that is, with parser differentials) we need to squeeze complexity out of data until data stops being "code equivalent" Further information See and langsec.org. USENIX WOOT 2013 (Workshop on Offensive Technologies) for "weird machines" papers and videos.

  Read the article

• Using DNFS for test purposes

  - by rene.kundersma

  Because of other priorities such as bringing the first v2 Database Machine in Netherlands into production I did spend less time on my blog that planned. I do however like to tell some things about DNFS, the build-in NFS client we have in Oracle RDBMS since 11.1. What DNFS is and how to set it up can all be found here . As you see this documentation is actually the "Clusterware Installation Guide". I think that is weird, I would expect this to be part of the Admin Guide, especially the "Tablespace" chapter. I do however want to show what I did not find in the documentation that quickly (and solved after talking to my famous colleague "the prutser"): First, a quick setup: 1. The standard ODM library needs to be replaced with the NFS ODM library: [oracle@ocm01 ~]$ cp $ORACLE_HOME/lib/libodm11.so $ORACLE_HOME/lib/libodm11.so_stub [oracle@ocm01 ~]$ ln -s $ORACLE_HOME/lib/libnfsodm11.so $ORACLE_HOME/lib/libodm11.so After changing to this library you will notice the following in your alert.log: Oracle instance running with ODM: Oracle Direct NFS ODM Library Version 2.0 2. The intention is to mount the datafiles over normal NAS (like NetApp). But, in case you want to test yourself and use an exported NFS filesystem, it should look like the following: [oracle@ocm01 ~]$ cat /etc/exports /u01/scratch/nfs *(rw,sync,insecure) Please note the "insecure" option in the export, since you will not be able to use DNFS without it if you export a filesystem from a host. Without the "insecure" option the NFS server considers the port used by the database "insecure" and the database is unable to acquire the mount: Direct NFS: NFS3ERR 1 Not owner. path ocm01.nl.oracle.com mntport 930 nfsport 2049 3. Before configuring the new Oracle stanza for NFS we still need to configure a regular kernel NFS mount: [root@ocm01 ~]# cat /etc/fstab | grep nfs ocm01.nl.oracle.com:/u01/scratch/nfs /incoming nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600 4. Then a so called Oracle-'nfstab' needs to be created that specifies what the available exports to use: [oracle@ocm01 ~]$ cat /etc/oranfstab server:ocm01.nl.oracle.com path:192.168.1.40 export:/u01/scratch/nfs mount:/incoming 5. Creating a tablespace with a datafile on the NFS location: SQL create tablespace rk datafile '/incoming/rk.dbf' size 10M; Tablespace created. Be sure to know that it may happen that you do not specify the insecure option (like I did). In that case you will still see output from the query v$dnfs_servers: SQL select * from v$dnfs_servers; ID SVRNAME DIRNAME MNTPORT NFSPORT WTMAX RTMAX -- -------------------- ----------------- --------- ---------- ------ ------ 1 ocm01.nl.oracle.com /u01/scratch/nfs 684 2049 32768 32768 But, querying v$dnfsfiles and v$dnfs_channels will now return any result, and indeed, you will see the following message in the alert-log when you create a file : Direct NFS: NFS3ERR 1 Not owner. path ocm01.nl.oracle.com mntport 930 nfsport 2049 After correcting the export: SQL select * from v$dnfs_files; FILENAME FILESIZE PNUM SVR_ID --------------- -------- ------ ------ /incoming/rk.dbf 10493952 20 1 Rene Kundersma Oracle Technology Services, The Netherlands

  Read the article

• Diving into OpenStack Network Architecture - Part 1

  - by Ronen Kofman

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment.  We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf     Bridge br-int         Port br-int             Interface br-int type: internal         Port "int-br-eth2"             Interface "int-br-eth2"     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port br-int             Interface br-int type: internal         Port "qvocb64ea96-9f" tag: 1             Interface "qvocb64ea96-9f"     Bridge "br-eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:16436 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:65536 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) my-port   Link encap:Ethernet HWaddr 22:04:45:E2:85:21           BROADCAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0     Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) veth1     Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name     bridge id               STP enabled     interfaces br-eth3         8000.00505682e7f6       no              eth3                                                         veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

  Read the article

• My Ubuntu Touch seems to be broken no matter how many different files I try

  - by zeokila

  So I'm planning on testing out Ubuntu Touch, and developing some applications for it so I thought I would flash it to my Nexus 4 that was already unlocked, and running Paranoid Android and the kernel associated. I headed to Ubuntu's website, browsed around and came across this page: Touch/Install - Ubuntu Wiki I followed Step 1 perfectly, word by word. Its seems to me that everything on that part is fine. I skipped Step 2 having already done that for Paranoid Android, and then I follow 3 and 4 word to word also. Using the command phablet-flash -b everything seemed to be fine. So it booted up and all seemed normal, but it wasn't. Here are some major bugs that only seem to happen to me. So I was greeted with a normal lock screen: But one of the first noticable things on the home screen is that I only have 4 tabs, not 5: Some of the applications that are supposed to work do not (I know some are dummies) like here with the calculator, this is what I get: On the homescreen it is a black box, it will crash a couple of seconds later: Another annoying problem is that when I want to close apps, I have from right to left, if I close an app on the left first it will close it, but it will open the app to it's right, weird: Yet another bug, this one is in the pull down drawer, when you just click on it, you can see that not all the icons are there: Pretty much everything else works as it should, but my main problem is that there is no telephony, I'm not sure how it works exactly, but I'm never asked a SIM code (I'm guessing you need that?), I can't compose SMS's and can't dial numbers, it won't let me select the 'Send' or 'Call' button. I've after tried manual installs all over the place with these files: http://cdimage.ubuntu.com/ubuntu-touch-preview/daily-preinstalled/current/saucy-preinstalled-armel+mako.zip (Says 44MB on site - 46.6MB on my laptop) http://cdimage.ubuntu.com/ubuntu-touch-preview/daily-preinstalled/current/saucy-preinstalled-phablet-armhf.zip (Says 366MB on site - 383.2MB on my laptop) There are some weird size differences between what the site told me and what I downloaded, but I've tried re-downloading just to end up with the same file. And it just alway ends up with the same problems. No telephony and those weird bugs. So my question is, how the hell can I get the same version as everyone else, with the ability to send texts and call and open the calculator and more? Also, definitely running saucy: And maybe useful? This is what's in the device info:

  Read the article

• Unable to transfer data to or from mounted hard drive

  - by user210335

  So usually i'm good at sorting out issues. But this one has me at a loss! This issues has occured since upgrading my ubuntu so this was workingg prior. I use mounted hard drives to manage my downloads which are then copied over accordingly by a python based app. I found it was having issues with permissions to create anything on these mounted hard drives. I'm able to play and access he content of these drives so they're not faulty. My mount script looks like the following rw,user,exec,auto I really am stuck. Could anyone shed any light on how to fix this and allow me to access it. I've checked the properties and all groups should have read and write access so i'm very confused! thanks, edit here's the output of my mount options /dev/sda2 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /sys/firmware/efi/efivars type efivarfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) /dev/sda1 on /boot/efi type vfat (rw) /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sdb1 on /mnt/B88A30E88A30A4B2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=simon) /dev/sdd1 on /media/simon/New Volume3 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) the main mount in question is /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) heres my dmesg output. I tried cchanging permissions in a terminal and I got an io error. [52803.343417] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343420] sd 2:0:0:0: [sdc] CDB: [52803.343422] Read(10): 28 00 00 60 9e 3f 00 00 08 00 [52803.343805] sd 2:0:0:0: [sdc] Unhandled error code [52803.343808] sd 2:0:0:0: [sdc] [52803.343810] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343812] sd 2:0:0:0: [sdc] CDB: [52803.343813] Read(10): 28 00 00 67 64 67 00 00 08 00 [52803.344389] sd 2:0:0:0: [sdc] Unhandled error code [52803.344392] sd 2:0:0:0: [sdc] [52803.344394] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344396] sd 2:0:0:0: [sdc] CDB: [52803.344397] Read(10): 28 00 09 bd e7 6f 00 00 08 00 [52803.344584] sd 2:0:0:0: [sdc] Unhandled error code [52803.344587] sd 2:0:0:0: [sdc] [52803.344589] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344591] sd 2:0:0:0: [sdc] CDB: [52803.344592] Read(10): 28 00 07 3a cf b7 00 00 08 00 [52803.344776] sd 2:0:0:0: [sdc] Unhandled error code [52803.344779] sd 2:0:0:0: [sdc] [52803.344781] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344783] sd 2:0:0:0: [sdc] CDB: [52803.344784] Read(10): 28 00 09 bd e7 97 00 00 08 00 [52803.344973] sd 2:0:0:0: [sdc] Unhandled error code [52803.344976] sd 2:0:0:0: [sdc] [52803.344978] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344980] sd 2:0:0:0: [sdc] CDB: [52803.344981] Read(10): 28 00 08 dd 57 ef 00 00 08 00 [52803.346745] sd 2:0:0:0: [sdc] Unhandled error code [52803.346748] sd 2:0:0:0: [sdc] [52803.346750] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.346752] sd 2:0:0:0: [sdc] CDB: [52803.346754] Read(10): 28 00 07 1a c1 0f 00 00 08 00 [52803.349939] sd 2:0:0:0: [sdc] Unhandled error code [52803.349942] sd 2:0:0:0: [sdc] [52803.349944] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.349946] sd 2:0:0:0: [sdc] CDB: [52803.349948] Read(10): 28 00 00 67 64 9f 00 00 08 00 [52803.350147] sd 2:0:0:0: [sdc] Unhandled error code [52803.350150] sd 2:0:0:0: [sdc] [52803.350152] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.350154] sd 2:0:0:0: [sdc] CDB: [52803.350155] Read(10): 28 00 00 67 64 97 00 00 08 00 [52803.351302] sd 2:0:0:0: [sdc] Unhandled error code [52803.351305] sd 2:0:0:0: [sdc] [52803.351307] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351309] sd 2:0:0:0: [sdc] CDB: [52803.351311] Read(10): 28 00 00 a4 1d cf 00 00 08 00 [52803.351894] sd 2:0:0:0: [sdc] Unhandled error code [52803.351897] sd 2:0:0:0: [sdc] [52803.351899] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351901] sd 2:0:0:0: [sdc] CDB: [52803.351902] Read(10): 28 00 00 67 67 3f 00 00 08 00 [52803.353163] sd 2:0:0:0: [sdc] Unhandled error code [52803.353166] sd 2:0:0:0: [sdc] [52803.353168] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353170] sd 2:0:0:0: [sdc] CDB: [52803.353172] Read(10): 28 00 00 67 64 ef 00 00 08 00 [52803.353917] sd 2:0:0:0: [sdc] Unhandled error code [52803.353920] sd 2:0:0:0: [sdc] [52803.353922] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353924] sd 2:0:0:0: [sdc] CDB: [52803.353925] Read(10): 28 00 00 67 65 17 00 00 08 00 [52803.354484] sd 2:0:0:0: [sdc] Unhandled error code [52803.354487] sd 2:0:0:0: [sdc] [52803.354489] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.354491] sd 2:0:0:0: [sdc] CDB: [52803.354492] Read(10): 28 00 07 1a d8 9f 00 00 08 00 [52803.355005] sd 2:0:0:0: [sdc] Unhandled error code [52803.355010] sd 2:0:0:0: [sdc] [52803.355013] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355017] sd 2:0:0:0: [sdc] CDB: [52803.355019] Read(10): 28 00 00 67 65 3f 00 00 08 00 [52803.355293] sd 2:0:0:0: [sdc] Unhandled error code [52803.355298] sd 2:0:0:0: [sdc] [52803.355301] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355305] sd 2:0:0:0: [sdc] CDB: [52803.355308] Read(10): 28 00 00 a4 20 27 00 00 08 00 [52803.355575] sd 2:0:0:0: [sdc] Unhandled error code [52803.355580] sd 2:0:0:0: [sdc] [52803.355583] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355587] sd 2:0:0:0: [sdc] CDB: [52803.355589] Read(10): 28 00 00 5d dc 67 00 00 08 00 [52803.356647] sd 2:0:0:0: [sdc] Unhandled error code [52803.356650] sd 2:0:0:0: [sdc] [52803.356652] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.356654] sd 2:0:0:0: [sdc] CDB: [52803.356655] Read(10): 28 00 07 1a dd 3f 00 00 08 00 [52803.357108] sd 2:0:0:0: [sdc] Unhandled error code [52803.357111] sd 2:0:0:0: [sdc] [52803.357113] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357115] sd 2:0:0:0: [sdc] CDB: [52803.357116] Read(10): 28 00 00 67 65 97 00 00 08 00 [52803.357298] sd 2:0:0:0: [sdc] Unhandled error code [52803.357300] sd 2:0:0:0: [sdc] [52803.357302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357304] sd 2:0:0:0: [sdc] CDB: [52803.357306] Read(10): 28 00 07 1a 04 d7 00 00 08 00 [52803.360374] sd 2:0:0:0: [sdc] Unhandled error code [52803.360377] sd 2:0:0:0: [sdc] [52803.360379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360382] sd 2:0:0:0: [sdc] CDB: [52803.360383] Read(10): 28 00 00 67 65 b7 00 00 08 00 [52803.360581] sd 2:0:0:0: [sdc] Unhandled error code [52803.360584] sd 2:0:0:0: [sdc] [52803.360586] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360588] sd 2:0:0:0: [sdc] CDB: [52803.360589] Read(10): 28 00 00 67 65 c7 00 00 08 00 [52803.361352] sd 2:0:0:0: [sdc] Unhandled error code [52803.361355] sd 2:0:0:0: [sdc] [52803.361357] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.361359] sd 2:0:0:0: [sdc] CDB: [52803.361360] Read(10): 28 00 09 bd e1 af 00 00 08 00 [52803.362096] sd 2:0:0:0: [sdc] Unhandled error code [52803.362099] sd 2:0:0:0: [sdc] [52803.362101] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362103] sd 2:0:0:0: [sdc] CDB: [52803.362104] Read(10): 28 00 07 0a 64 e7 00 00 08 00 [52803.362555] sd 2:0:0:0: [sdc] Unhandled error code [52803.362558] sd 2:0:0:0: [sdc] [52803.362560] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362562] sd 2:0:0:0: [sdc] CDB: [52803.362563] Read(10): 28 00 00 67 65 d7 00 00 08 00 [52803.362747] sd 2:0:0:0: [sdc] Unhandled error code [52803.362750] sd 2:0:0:0: [sdc] [52803.362752] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362754] sd 2:0:0:0: [sdc] CDB: [52803.362755] Read(10): 28 00 01 4c 12 6f 00 00 08 00 [52803.362977] sd 2:0:0:0: [sdc] Unhandled error code [52803.362980] sd 2:0:0:0: [sdc] [52803.362982] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362984] sd 2:0:0:0: [sdc] CDB: [52803.362985] Read(10): 28 00 03 85 43 7f 00 00 08 00 [52803.365197] sd 2:0:0:0: [sdc] Unhandled error code [52803.365200] sd 2:0:0:0: [sdc] [52803.365202] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365204] sd 2:0:0:0: [sdc] CDB: [52803.365206] Read(10): 28 00 07 15 46 4f 00 00 08 00 [52803.365524] sd 2:0:0:0: [sdc] Unhandled error code [52803.365527] sd 2:0:0:0: [sdc] [52803.365528] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365531] sd 2:0:0:0: [sdc] CDB: [52803.365532] Read(10): 28 00 07 11 78 8f 00 00 08 00 [52803.369355] sd 2:0:0:0: [sdc] Unhandled error code [52803.369360] sd 2:0:0:0: [sdc] [52803.369362] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.369365] sd 2:0:0:0: [sdc] CDB: [52803.369366] Read(10): 28 00 09 bd e2 8f 00 00 08 00 [52803.370806] sd 2:0:0:0: [sdc] Unhandled error code [52803.370809] sd 2:0:0:0: [sdc] [52803.370811] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.370814] sd 2:0:0:0: [sdc] CDB: [52803.370815] Read(10): 28 00 07 1a c6 37 00 00 08 00 [52803.371630] sd 2:0:0:0: [sdc] Unhandled error code [52803.371634] sd 2:0:0:0: [sdc] [52803.371636] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371639] sd 2:0:0:0: [sdc] CDB: [52803.371640] Read(10): 28 00 00 67 66 57 00 00 08 00 [52803.371863] sd 2:0:0:0: [sdc] Unhandled error code [52803.371867] sd 2:0:0:0: [sdc] [52803.371868] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371871] sd 2:0:0:0: [sdc] CDB: [52803.371872] Read(10): 28 00 00 64 0b df 00 00 08 00 [52803.373467] sd 2:0:0:0: [sdc] Unhandled error code [52803.373470] sd 2:0:0:0: [sdc] [52803.373472] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373474] sd 2:0:0:0: [sdc] CDB: [52803.373476] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.373655] sd 2:0:0:0: [sdc] Unhandled error code [52803.373658] sd 2:0:0:0: [sdc] [52803.373660] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373662] sd 2:0:0:0: [sdc] CDB: [52803.373663] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.374063] sd 2:0:0:0: [sdc] Unhandled error code [52803.374066] sd 2:0:0:0: [sdc] [52803.374068] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374070] sd 2:0:0:0: [sdc] CDB: [52803.374071] Read(10): 28 00 08 db d5 5f 00 00 08 00 [52803.374602] sd 2:0:0:0: [sdc] Unhandled error code [52803.374605] sd 2:0:0:0: [sdc] [52803.374607] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374609] sd 2:0:0:0: [sdc] CDB: [52803.374611] Read(10): 28 00 07 1a bf a7 00 00 08 00 [52803.375259] sd 2:0:0:0: [sdc] Unhandled error code [52803.375264] sd 2:0:0:0: [sdc] [52803.375267] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375270] sd 2:0:0:0: [sdc] CDB: [52803.375272] Read(10): 28 00 00 67 66 87 00 00 08 00 [52803.375515] sd 2:0:0:0: [sdc] Unhandled error code [52803.375520] sd 2:0:0:0: [sdc] [52803.375522] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375526] sd 2:0:0:0: [sdc] CDB: [52803.375527] Read(10): 28 00 00 62 54 8f 00 00 08 00 [52803.378506] sd 2:0:0:0: [sdc] Unhandled error code [52803.378513] sd 2:0:0:0: [sdc] [52803.378516] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.378520] sd 2:0:0:0: [sdc] CDB: [52803.378522] Read(10): 28 00 00 67 66 bf 00 00 08 00 [52803.381048] sd 2:0:0:0: [sdc] Unhandled error code [52803.381054] sd 2:0:0:0: [sdc] [52803.381057] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381061] sd 2:0:0:0: [sdc] CDB: [52803.381063] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381238] sd 2:0:0:0: [sdc] Unhandled error code [52803.381242] sd 2:0:0:0: [sdc] [52803.381245] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381248] sd 2:0:0:0: [sdc] CDB: [52803.381250] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381382] sd 2:0:0:0: [sdc] Unhandled error code [52803.381386] sd 2:0:0:0: [sdc] [52803.381388] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381392] sd 2:0:0:0: [sdc] CDB: [52803.381394] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381569] sd 2:0:0:0: [sdc] Unhandled error code [52803.381573] sd 2:0:0:0: [sdc] [52803.381575] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381579] sd 2:0:0:0: [sdc] CDB: [52803.381581] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.382295] sd 2:0:0:0: [sdc] Unhandled error code [52803.382300] sd 2:0:0:0: [sdc] [52803.382302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382306] sd 2:0:0:0: [sdc] CDB: [52803.382307] Read(10): 28 00 00 67 6a 87 00 00 08 00 [52803.382552] sd 2:0:0:0: [sdc] Unhandled error code [52803.382556] sd 2:0:0:0: [sdc] [52803.382558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382562] sd 2:0:0:0: [sdc] CDB: [52803.382564] Read(10): 28 00 00 67 6a af 00 00 08 00 [52803.382794] sd 2:0:0:0: [sdc] Unhandled error code [52803.382798] sd 2:0:0:0: [sdc] [52803.382801] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382804] sd 2:0:0:0: [sdc] CDB: [52803.382806] Read(10): 28 00 00 67 6a c7 00 00 08 00 [52803.383269] sd 2:0:0:0: [sdc] Unhandled error code [52803.383274] sd 2:0:0:0: [sdc] [52803.383277] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383280] sd 2:0:0:0: [sdc] CDB: [52803.383282] Read(10): 28 00 00 67 6a f7 00 00 08 00 [52803.383556] sd 2:0:0:0: [sdc] Unhandled error code [52803.383560] sd 2:0:0:0: [sdc] [52803.383563] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383566] sd 2:0:0:0: [sdc] CDB: [52803.383568] Read(10): 28 00 00 67 6b 2f 00 00 08 00 [52803.386185] sd 2:0:0:0: [sdc] Unhandled error code [52803.386191] sd 2:0:0:0: [sdc] [52803.386194] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386198] sd 2:0:0:0: [sdc] CDB: [52803.386200] Read(10): 28 00 01 4c 1b bf 00 00 08 00 [52803.386454] sd 2:0:0:0: [sdc] Unhandled error code [52803.386458] sd 2:0:0:0: [sdc] [52803.386461] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386465] sd 2:0:0:0: [sdc] CDB: [52803.386467] Read(10): 28 00 07 1a b4 1f 00 00 08 00 [52803.388320] sd 2:0:0:0: [sdc] Unhandled error code [52803.388324] sd 2:0:0:0: [sdc] [52803.388326] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388328] sd 2:0:0:0: [sdc] CDB: [52803.388329] Read(10): 28 00 09 bd de 17 00 00 08 00 [52803.388836] sd 2:0:0:0: [sdc] Unhandled error code [52803.388838] sd 2:0:0:0: [sdc] [52803.388839] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388841] sd 2:0:0:0: [sdc] CDB: [52803.388842] Read(10): 28 00 07 57 9f ff 00 00 08 00 [52803.389124] sd 2:0:0:0: [sdc] Unhandled error code [52803.389126] sd 2:0:0:0: [sdc] [52803.389127] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389129] sd 2:0:0:0: [sdc] CDB: [52803.389130] Read(10): 28 00 00 67 6b 8f 00 00 08 00 [52803.389244] sd 2:0:0:0: [sdc] Unhandled error code [52803.389246] sd 2:0:0:0: [sdc] [52803.389248] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389249] sd 2:0:0:0: [sdc] CDB: [52803.389250] Read(10): 28 00 07 e9 ee ff 00 00 08 00 [52803.390386] sd 2:0:0:0: [sdc] Unhandled error code [52803.390389] sd 2:0:0:0: [sdc] [52803.390390] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390392] sd 2:0:0:0: [sdc] CDB: [52803.390393] Read(10): 28 00 07 1a be 0f 00 00 08 00 [52803.390682] sd 2:0:0:0: [sdc] Unhandled error code [52803.390685] sd 2:0:0:0: [sdc] [52803.390686] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390688] sd 2:0:0:0: [sdc] CDB: [52803.390689] Read(10): 28 00 00 67 6b e7 00 00 08 00 [52803.390804] sd 2:0:0:0: [sdc] Unhandled error code [52803.390806] sd 2:0:0:0: [sdc] [52803.390808] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390809] sd 2:0:0:0: [sdc] CDB: [52803.390810] Read(10): 28 00 07 ed 17 bf 00 00 08 00 [52803.391449] sd 2:0:0:0: [sdc] Unhandled error code [52803.391451] sd 2:0:0:0: [sdc] [52803.391452] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391454] sd 2:0:0:0: [sdc] CDB: [52803.391455] Read(10): 28 00 09 bd e5 9f 00 00 08 00 [52803.391956] sd 2:0:0:0: [sdc] Unhandled error code [52803.391958] sd 2:0:0:0: [sdc] [52803.391960] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391961] sd 2:0:0:0: [sdc] CDB: [52803.391962] Read(10): 28 00 00 b5 86 a7 00 00 08 00 [52803.392293] sd 2:0:0:0: [sdc] Unhandled error code [52803.392295] sd 2:0:0:0: [sdc] [52803.392296] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392298] sd 2:0:0:0: [sdc] CDB: [52803.392299] Read(10): 28 00 07 18 bf bf 00 00 08 00 [52803.392843] sd 2:0:0:0: [sdc] Unhandled error code [52803.392845] sd 2:0:0:0: [sdc] [52803.392846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392848] sd 2:0:0:0: [sdc] CDB: [52803.392849] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.392929] sd 2:0:0:0: [sdc] Unhandled error code [52803.392931] sd 2:0:0:0: [sdc] [52803.392932] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392934] sd 2:0:0:0: [sdc] CDB: [52803.392935] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.393057] sd 2:0:0:0: [sdc] Unhandled error code [52803.393059] sd 2:0:0:0: [sdc] [52803.393060] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393062] sd 2:0:0:0: [sdc] CDB: [52803.393063] Read(10): 28 00 00 60 83 9f 00 00 08 00 [52803.393286] sd 2:0:0:0: [sdc] Unhandled error code [52803.393288] sd 2:0:0:0: [sdc] [52803.393289] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393291] sd 2:0:0:0: [sdc] CDB: [52803.393292] Read(10): 28 00 00 67 6b bf 00 00 08 00 [52803.393720] sd 2:0:0:0: [sdc] Unhandled error code [52803.393722] sd 2:0:0:0: [sdc] [52803.393723] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393725] sd 2:0:0:0: [sdc] CDB: [52803.393725] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393806] sd 2:0:0:0: [sdc] Unhandled error code [52803.393808] sd 2:0:0:0: [sdc] [52803.393809] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393810] sd 2:0:0:0: [sdc] CDB: [52803.393811] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393892] sd 2:0:0:0: [sdc] Unhandled error code [52803.393894] sd 2:0:0:0: [sdc] [52803.393895] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393896] sd 2:0:0:0: [sdc] CDB: [52803.393897] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393974] sd 2:0:0:0: [sdc] Unhandled error code [52803.393976] sd 2:0:0:0: [sdc] [52803.393977] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393978] sd 2:0:0:0: [sdc] CDB: [52803.393979] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.394298] sd 2:0:0:0: [sdc] Unhandled error code [52803.394300] sd 2:0:0:0: [sdc] [52803.394302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.394303] sd 2:0:0:0: [sdc] CDB: [52803.394304] Read(10): 28 00 00 5d a6 a7 00 00 08 00 [52803.395577] sd 2:0:0:0: [sdc] Unhandled error code [52803.395580] sd 2:0:0:0: [sdc] [52803.395582] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395584] sd 2:0:0:0: [sdc] CDB: [52803.395585] Read(10): 28 00 00 00 01 9f 00 00 08 00 [52803.395721] sd 2:0:0:0: [sdc] Unhandled error code [52803.395724] sd 2:0:0:0: [sdc] [52803.395725] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395726] sd 2:0:0:0: [sdc] CDB: [52803.395727] Read(10): 28 00 00 00 01 67 00 00 08 00 [52803.395843] sd 2:0:0:0: [sdc] Unhandled error code [52803.395845] sd 2:0:0:0: [sdc] [52803.395846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395847] sd 2:0:0:0: [sdc] CDB: [52803.395848] Read(10): 28 00 02 a8 33 77 00 00 08 00 [52803.395960] sd 2:0:0:0: [sdc] Unhandled error code [52803.395962] sd 2:0:0:0: [sdc] [52803.395963] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395965] sd 2:0:0:0: [sdc] CDB: [52803.395965] Read(10): 28 00 00 b5 ae 7f 00 00 08 00 [52803.396077] sd 2:0:0:0: [sdc] Unhandled error code [52803.396079] sd 2:0:0:0: [sdc] [52803.396080] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396082] sd 2:0:0:0: [sdc] CDB: [52803.396083] Read(10): 28 00 00 63 64 bf 00 00 08 00 [52803.396193] sd 2:0:0:0: [sdc] Unhandled error code [52803.396195] sd 2:0:0:0: [sdc] [52803.396196] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396198] sd 2:0:0:0: [sdc] CDB: [52803.396199] Read(10): 28 00 07 1a e2 e7 00 00 08 00 [52803.396313] sd 2:0:0:0: [sdc] Unhandled error code [52803.396315] sd 2:0:0:0: [sdc] [52803.396316] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396318] sd 2:0:0:0: [sdc] CDB: [52803.396319] Read(10): 28 00 07 1a b9 87 00 00 08 00 [52803.396435] sd 2:0:0:0: [sdc] Unhandled error code [52803.396437] sd 2:0:0:0: [sdc] [52803.396438] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396439] sd 2:0:0:0: [sdc] CDB: [52803.396441] Read(10): 28 00 02 ce 8e df 00 00 08 00 [52803.396555] sd 2:0:0:0: [sdc] Unhandled error code [52803.396557] sd 2:0:0:0: [sdc] [52803.396558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396560] sd 2:0:0:0: [sdc] CDB: [52803.396561] Read(10): 28 00 0e 66 6d f7 00 00 08 00 [52803.396769] sd 2:0:0:0: [sdc] Unhandled error code [52803.396770] sd 2:0:0:0: [sdc] [52803.396772] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396773] sd 2:0:0:0: [sdc] CDB: [52803.396774] Read(10): 28 00 07 1a e4 2f 00 00 08 00 [52803.396886] sd 2:0:0:0: [sdc] Unhandled error code [52803.396888] sd 2:0:0:0: [sdc] [52803.396889] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396890] sd 2:0:0:0: [sdc] CDB: [52803.396891] Read(10): 28 00 00 63 d4 3f 00 00 08 00 [52803.397002] sd 2:0:0:0: [sdc] Unhandled error code [52803.397004] sd 2:0:0:0: [sdc] [52803.397005] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.397007] sd 2:0:0:0: [sdc] CDB: [52803.397007] Read(10): 28 00 07 1a e4 1f 00 00 08 00 [52803.400074] sd 2:0:0:0: [sdc] Unhandled error code [52803.400078] sd 2:0:0:0: [sdc] [52803.400079] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400081] sd 2:0:0:0: [sdc] CDB: [52803.400082] Read(10): 28 00 07 16 c7 5f 00 00 08 00 [52803.400318] sd 2:0:0:0: [sdc] Unhandled error code [52803.400320] sd 2:0:0:0: [sdc] [52803.400322] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400323] sd 2:0:0:0: [sdc] CDB: [52803.400324] Read(10): 28 00 00 60 01 87 00 00 08 00 [52803.400408] sd 2:0:0:0: [sdc] Unhandled error code [52803.400410] sd 2:0:0:0: [sdc] [52803.400412] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400413] sd 2:0:0:0: [sdc] CDB: [52803.400414] Read(10): 28 00 00 60 01 0f 00 00 08 00 [52803.400564] sd 2:0:0:0: [sdc] Unhandled error code [52803.400566] sd 2:0:0:0: [sdc] [52803.400568] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400569] sd 2:0:0:0: [sdc] CDB: [52803.400570] Read(10): 28 00 00 5d d1 d7 00 00 08 00 [52803.400841] sd 2:0:0:0: [sdc] Unhandled error code [52803.400843] sd 2:0:0:0: [sdc] [52803.400844] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400846] sd 2:0:0:0: [sdc] CDB: [52803.400847] Read(10): 28 00 07 1a e3 47 00 00 08 00 [52803.401151] sd 2:0:0:0: [sdc] Unhandled error code [52803.401153] sd 2:0:0:0: [sdc] [52803.401155] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401156] sd 2:0:0:0: [sdc] CDB: [52803.401157] Read(10): 28 00 07 1a b9 1f 00 00 08 00 [52803.401310] sd 2:0:0:0: [sdc] Unhandled error code [52803.401312] sd 2:0:0:0: [sdc] [52803.401313] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401315] sd 2:0:0:0: [sdc] CDB: [52803.401316] Read(10): 28 00 00 a4 1b 57 00 00 08 00 [52803.401877] sd 2:0:0:0: [sdc] Unhandled error code [52803.401879] sd 2:0:0:0: [sdc] [52803.401880] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401881] sd 2:0:0:0: [sdc] CDB: [52803.401882] Read(10): 28 00 0e 66 35 47 00 00 08 00 [52803.402032] sd 2:0:0:0: [sdc] Unhandled error code [52803.402033] sd 2:0:0:0: [sdc] [52803.402034] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402036] sd 2:0:0:0: [sdc] CDB: [52803.402037] Read(10): 28 00 06 30 69 ff 00 00 08 00 [52803.402148] sd 2:0:0:0: [sdc] Unhandled error code [52803.402150] sd 2:0:0:0: [sdc] [52803.402151] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402153] sd 2:0:0:0: [sdc] CDB: [52803.402154] Read(10): 28 00 09 bd d8 77 00 00 08 00 [52803.402263] sd 2:0:0:0: [sdc] Unhandled error code [52803.402265] sd 2:0:0:0: [sdc] [52803.402266] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402267] sd 2:0:0:0: [sdc] CDB: [52803.402268] Read(10): 28 00 00 5d ff 77 00 00 08 00 [52803.402376] sd 2:0:0:0: [sdc] Unhandled error code [52803.402378] sd 2:0:0:0: [sdc] [52803.402379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402381] sd 2:0:0:0: [sdc] CDB: [52803.402382] Read(10): 28 00 00 5d ff 7f 00 00 08 00 [52803.402490] sd 2:0:0:0: [sdc] Unhandled error code [52803.402492] sd 2:0:0:0: [sdc] [52803.402493] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402495] sd 2:0:0:0: [sdc] CDB: [52803.402496] Read(10): 28 00 00 00 01 2f 00 00 08 00 [52803.402602] sd 2:0:0:0: [sdc] Unhandled error code [52803.402604] sd 2:0:0:0: [sdc] [52803.402605] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402607] sd 2:0:0:0: [sdc] CDB: [52803.402608] Read(10): 28 00 00 b5 ac 8f 00 00 08 00 [52803.402715] sd 2:0:0:0: [sdc] Unhandled error code [52803.402717] sd 2:0:0:0: [sdc] [52803.402719] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402720] sd 2:0:0:0: [sdc] CDB: [52803.402721] Read(10): 28 00 00 e1 18 ff 00 00 08 00 [52803.402829] sd 2:0:0:0: [sdc] Unhandled error code [52803.402831] sd 2:0:0:0: [sdc] [52803.402833] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402834] sd 2:0:0:0: [sdc] CDB: [52803.402835] Read(10): 28 00 09 bd ea cf 00 00 08 00 [52803.403999] sd 2:0:0:0: [sdc] Unhandled error code [52803.404001] sd 2:0:0:0: [sdc] [52803.404003] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.404005] sd 2:0:0:0: [sdc] CDB: [52803.404006] Read(10): 28 00 07 1a b8 f7 00 00 08 00 [52832.950225] sd 2:0:0:0: [sdc] Unhandled error code [52832.950230] sd 2:0:0:0: [sdc] [52832.950233] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950235] sd 2:0:0:0: [sdc] CDB: [52832.950237] Write(10): 2a 00 00 60 bf 7f 00 00 08 00 [52832.950247] blk_update_request: 1077 callbacks suppressed [52832.950250] end_request: I/O error, dev sdc, sector 6340479 [52832.950253] quiet_error: 1077 callbacks suppressed [52832.950256] Buffer I/O error on device sdc1, logical block 792552 [52832.950258] lost page write due to I/O error on sdc1 [52832.950269] sd 2:0:0:0: [sdc] Unhandled error code [52832.950272] sd 2:0:0:0: [sdc] [52832.950273] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950276] sd 2:0:0:0: [sdc] CDB: [52832.950277] Write(10): 2a 00 01 a5 f1 4f 00 00 08 00 [52832.950285] end_request: I/O error, dev sdc, sector 27652431 [52832.950287] Buffer I/O error on device sdc1, logical block 3456546 [52832.950289] lost page write due to I/O error on sdc1

  Read the article

• How to (un)dock IBM Thinkpad X41 from X4 Dock(ing station) successfully?

  - by nutty about natty

  I'd like to start using my docking station again; however, it still doesn't work as it should, see the following bug descriptions (with special focus on Thinkpad X41 & the X4 Dock). Given that it still doesn't work (effective April 2012), my hope is fading that it will start working all of a sudden with Precise Pangolin at the end of the month. This issue is VERY important to me and I would be MOST grateful to anyone being able to sieve through the following links (some of which are actually quite recent) and translate their meaning into reliable and concrete simple (?) steps. I've read briefly about hal and udev, and can imagine that they are somewhat related to this, see links below. I don't want to fire at random. I don't want to tinker around with bash scripts if avoidable... Problem description (more or less ;-) Pressing the undock button on a "ThinkPad X4 Dock" with a ThinkPad X40 does not cause any udev events. And the lights on the dock never change to indicate it is safe to undock. and IBM Thinkpad X41 & docking station no joy :-( ... when pressing the blue undock button on the docking station: - The screen goes blank (with backlight remaining on), - with some SSD/HDD activity; - ctrl alt del causes a shut down after ... seconds, indicating that the system itself hasn't "crashed" but is still (somewhat ?) responsive. and With recent distributions, docking and undocking should function out of the box. You can monitor this by running # udevadm monitor and when you dock or press the undock button you should see a flurry of events. There are some issues though: No event on undock. - In some cases you may not get any events on undock. This is due to the ACPI dock drivers only registering the first logical Dock port they encounter and in some rare cases there may be more then one, such as on a ThinkPad X40 with ThinkPad X4 Dock. Patches are available, and are merged in 2.6.34. Now, if patches are available and merged into 2.6.34 - why isn't (un)docking simply working / fully supported in the latest version of Natty (which to my humble understanding has surpassed kernel version 2.6.34 a while ago)? More relevant links: ThinkPad X41 Docking Station issues and [HOWTO] Run scripts for laptop lid open/close and dock/undock events and finally Symptoms corrected by the latest BIOS Update - ThinkPad X41 - (Fix) USB devices connected to UltraBase X4 or ThinkPad X4 Dock may not be recognized in Boot Menu by pressing F12 during POST. Thanks!!

  Read the article

• OTN ???? ?????? ???????

  - by Yusuke.Yamamoto

  Database ?? Database ??????? Database ?????????? Java WebLogic Server/????????·???? SOA/BPM/????? ???????/???? ID??/?????? ?????EPM/BI EPM/BI ??????? EPM/BI ???? OS/??? ???? ????? MySQL Database ?? ???? ?? ????????? ??? ?? ORACLE MASTER??Master??ORACLE MASTER Bronze?Bronze DBA11g? ??(WMV)??(MP4)2011/6/22 ORACLE MASTER??Master??ORACLE MASTER Bronze?11g SQL??????(WMV)??(MP4)2011/3/9 ORACLE MASTER??Master??ORACLE MASTER Silver?Silver DBA11g???(WMV)??(MP4)2010/3/2 ORACLE MASTER??Master??ORACLE MASTER Silver?Silver DBA11g?[10g-11g???] ??(WMV)??(MP4)2012/4/23 ORACLE MASTER??Master??ORACLE MASTER Gold DBA11g ??(WMV)??(MP4)2011/2/23 ORACLE MASTER??Master??ORACLE MASTER Gold ?Gold DBA11g ????[??]??(WMV)??(MP4)2012/4/23 ORACLE MASTER??Master??30?????? ORACLE MASTER??????(WMV)??(MP4)2012/9/3 Oracle Database???????????????!Oracle??????????!???(WMV)??(MP4)2010/9/8 Oracle Database???????????????????!? Oracle?? ?????(WMV)??(MP4)2011/4/13 Oracle Database???????????????????!? Oracle?? ??????????(WMV)??(MP4)2011/4/20 Oracle Database???????????????????????????!? ??????????-?????(WMV)??(MP4)2012/2/20 Oracle Database???????????????????????????!? ??????????-?????(WMV)??(MP4)2012/2/20 Oracle Database????????????60???????!?????????????·???????? ??(WMV)??(MP4)2011/5/17 Oracle Database???Step by Step?????!? Oracle Database 11g -?????????-??(WMV)??(MP4)2009/12/17 Oracle Database???Step by Step?????!? OracleDatabase11g -???????????(WMV)??(MP4)2009/12/24 Oracle Database???Step by Step?????!? Oracle Database 11g -?????????(WMV)??(MP4)2009/12/10 Oracle Database DBA?????????????????!???????????(WMV)??(MP4)2010/12/21 Oracle Database DBA?????????????????!????????·??????????(WMV)??(MP4)2010/11/16 Oracle Database DBA?????????????????!???????·????????(WMV)??(MP4)2010/12/15 Oracle Database DBA?????????????????!???????????(WMV)??(MP4)2010/7/21 Oracle Database DBA?????????????????!?Export/Import?????(WMV)??(MP4)2010/9/8 Oracle Database DBA??????????????????!??????????????(WMV)??(MP4)2011/7/20 Oracle Database DBA?????????·????????!!????????!?????????SQL????????(WMV)??(MP4)2010/11/24 Oracle Database DBA?????????·?????????SQL????????????!SQL????????(WMV)??(MP4)2012/1/23 Oracle Database DBA?????????·????????!!???????·??????~DiskI/O?????????~??(WMV)??(MP4)2011/3/9 Oracle Database DBA?????????·????????!!???????·??????~SQL???????~??(WMV)??(MP4)2011/9/20 Oracle Database DBA?????????·????????!???????·??????-Statspack??-??(WMV)??(MP4)2010/7/28 Oracle Database DBA?????????·????????!!???????·??????~??????????~??(WMV)??(MP4)2010/8/4 Oracle Database DBA?????????·????????!!???????·??????-?????????-??(WMV)??(MP4)2010/7/14 Oracle Database DBA?????????·?????? ??!????????????? ??????(WMV)??(MP4)2010/7/7 Oracle Database DBA?????????·????????!????????????? ??????(WMV)??(MP4)2010/7/7 Oracle Database DBA?????????·????????!! ????????DB ??????Tips??(WMV)??(MP4)2010/8/5 Oracle Database DBA??????????!!??????~Oracle Database???~??(WMV)??(MP4)2010/8/31 Oracle Database DBA??????????!!??????~OracleDatabase????~??(WMV)??(MP4)2010/8/24 Oracle Database DBA???????????????????????????????????????(WMV)??(MP4)2010/4/27 Oracle Database DBA????????&?????????????·???? - ?????RMAN??????(WMV)??(MP4)2010/10/13 Oracle Database DBA????????&???????!!??????·????-???????????-??(WMV)??(MP4)2010/9/8 Oracle Database DBA????????&???????!??????·???? ~?????? VS RMAN ?????????~??(WMV)??(MP4)2012/1/23 Oracle Database DBA????????&???????!??????·???? ~????????????~??(WMV)??(MP4)2011/7/27 Oracle Database DBA????????&?????????????????-???????????????????(WMV)??(MP4)2010/10/6 Oracle Database Developer??????????????? Oracle SQL????(WMV)??(MP4)2010/10/20 Oracle Database Developer??????????????? Oracle PL/SQL????(WMV)??(MP4)2012/1/23 Oracle Database Developer????????!!PL/SQL????????(WMV)??(MP4)2011/03 Oracle Database Developer?????????????????????(WMV)??(MP4)2011/5/25 Oracle Database Developer??Java??java???!??(WMV)??(MP4)2009/11/26 Database ??????? ???? ?? ????????? ??? ?? DB???????????????!Oracle Database????????(WMV)??(MP4)2010/5/12 DB???????????????????? Oracle Enterprise Manager??(WMV)??(MP4)2012/1/23 DB??????????!Oracle Enterprise Manager???????????????? ??(WMV)??(MP4)2012/1/23 DB??????????!Oracle Enterprise Manager??????????????·?????? ??(WMV)??(MP4)2012/1/23 DB?????????????(UX)????????????????????(WMV)??(MP4)2011/4/6 DB???????????????????????????????Oracle Enterprise Manager??????!??(WMV)??(MP4)2012/1/23 DB???JP1??????????????????????!JP1???????????(WMV)??(MP4)2011/6/9 DB???JP1JP1???????!DB????????·??????!??(WMV)??(MP4)2011/1/12 DB???SAP"SAP on Oracle Database"???Tips??(WMV)??(MP4)2011/1/12 DB?????????????????! Oracle Database ????????(WMV)??(MP4)2012/1/23 DB?????????Web????????? ~????????~??(WMV)??(MP4)2010/3/10 DB?????????Web??????? ~????????????????????????~??(WMV)??(MP4)2010/2/3 DB??????????Oracle Database Upgrade?????(WMV)??(MP4)2011/9/20 DB??????????Oracle Database Client??????????????(WMV)??(MP4)2011/4/26 DB??????????Oracle Database 11g Release 2????????????????? ??(WMV)??(MP4)2012/1/23 DB?????????????!Oracle???????????????????????????(WMV)??(MP4)2011/1/18 DB???PL/SQLPL/SQL??????? ????(WMV)??(MP4)2012/1/23 DB???PL/SQLPL/SQL??????? ????(WMV)??(MP4)2012/1/23 DB???SQL DeveloperOracle SQL Developer????????????????(WMV)??(MP4)2012/1/23 DB???Jdeveloper??IDE Oracle JDeveloper??????????????????(WMV)??(MP4)2012/1/23 DB???APEX?????????!!APEX??????????????(WMV)??(MP4)2011/4/13 DB???APEX????!60??????Web??????????(WMV)??(MP4)2011/3/3 DB???APEXOracle??????????????! APEX4.0??????(WMV)??(MP4)2011/2/9 DB???APEX?????!????????!Oracle APEX???????????(WMV)??(MP4)2011/6/23 DB???Large Object??·???????DB????? -LOB???????-??(WMV)??(MP4)2010/2/4 DB???XMLOracle Database???????XML???????(WMV)??(MP4)2011/3/16 DB???XML??????XML?? - ?????! XML??? -??(WMV)??(MP4)2010/8/18 DB???XML??????XML?? - Oracle????XML -??(WMV)??(MP4)2010/8/25 DB???????SQL?????!Oracle Database????????Oracle Text???????(WMV)??(MP4) - DB???Oracle Data Guard??!Oracle Data Guard ????????????????????(WMV)??(MP4)2012/1/23 DB???Oracle Real Application Clusters??!?????????? ~RAC???~??(WMV)??(MP4)2012/1/23 DB???Oracle Real Application Clusters??!?????????? ~RAC??? ~??(WMV)??(MP4)2012/1/23 DB???Oracle Real Application Clusters??!Oracle RAC????????????????????????(WMV)??(MP4)2012/1/23 DB???Oracle Real Application Clusters??????!RAC????????????(WMV)??(MP4)2012/1/23 DB???Oracle Real Application Clusters?????????????!!60?????RAC????(WMV)??(MP4)2010/12/8 DB???????????????????????????!!?Oracle Database Firewall? ??(WMV)??(MP4)2012/1/23 DB?????????Oracle Database Firewall??????????? ??(WMV)??(MP4)2012/5/14 DB?????????????????????????????????????????(WMV)??(MP4)2011/5/11 DB??????????????????????????????????????(WMV)??(MP4)2011/4/19 DB????????????????! ???????????????(WMV)??(MP4)2012/1/23 DB?????????????????????????????????(WMV)??(MP4)2010/11/16 DB???????????????????????????????????????????????(WMV)??(MP4)2011/2/9 DB???????????????~???????~??(WMV)??(MP4)2010/12/22 DB???????????????~????/????????~??(WMV)??(MP4)2011/5/24 DB??????Oracle VM 3.0 ???????(WMV)??(MP4)2011/10/3 DB??????????????BCP/BCM???Oracle??????????(WMV)??(MP4)2011/7/13 DB???????????????????????????????????????(WMV)??(MP4)2011/7/12 DB????????DB??????????!??????? Oracle ????????????? ??(WMV)??(MP4)2012/1/23 DB??????????????????!?????????????????(WMV)??(MP4)2011/6/22 DB??????????????????????(WMV)??(MP4)2011/10/17 DB???????????????????????????(WMV)??(MP4)2011/10/17 DB????????????????~?????????????????IT????~??(WMV)??(MP4)2009/12/22 DB??????????!???????? ~????????????????~??(WMV)??(MP4)2011/11/1 DB???????????????????? -???????????(WMV)??(MP4)2011/6/21 DB????????20?????? Oracle GoldenGate??(WMV)??(MP4)2012/4/23 DB????????Oracle GoldenGate?????????????(WMV)??(MP4)2012/5/14 DB???????????????????????????!Oracle GoldenGate??????(WMV)??(MP4)2011/11/1 DB???????????????????!GoldenGate????DB?????????(WMV)??(MP4)2011/8/24 DB????????????????????????? Oracle GoldenGate ????????????! ??(WMV)??(MP4)2012/1/23 DB???????? ??????????????????????????????(WMV)??(MP4)2011/03 DB???????????????!! Oracle Data Integrator??????????(WMV)??(MP4)2009/12/17 DB??????????!??????????????????????(WMV)??(MP4)2011/4/6 DB???????????????????????Oracle Database ????? ????(WMV)??(MP4)2012/1/23 DB???????????????????????Oracle Database ????? ????(WMV)??(MP4)2012/1/23 DB????????????!??????·??????????????????(WMV)??(MP4)2012/1/23 DB???Oracle Partitioning??!????????????????? ????(WMV)??(MP4)2012/1/23 DB???Oracle Partitioning??!????????????????? ????(WMV)??(MP4)2012/1/23 DB?????????????????!SQL?????????? ??(WMV)??(MP4)2010/12/21 DB???Exadata20?????? Oracle Exadata??(WMV)??(MP4)2012/4/23 DB???ExadataOracle Exadata??????????????????(WMV)??(MP4)2012/5/14 DB???Exadata????!Oracle Exadata????? ??(WMV)??(MP4)2011/10/17 DB???ExadataOracle Exadata????????????????????????? ??(WMV)??(MP4)2012/1/23 DB?????????DB?????DB????????????????? -Oracle TimesTen ????-??(WMV)??(MP4)2012/1/23 DB?????????DBWeb????????????!????????????????(WMV)??(MP4)2010/11/4 DB????????DBA?"???????" ????????????????(WMV)??(MP4)2010/8/25 DB?????????????!?Oracle ASM??????????????(WMV)??(MP4)2011/7/8 DB????????Oracle ASM ? Oracle Clusterware ??????????? ??(WMV)??(MP4)2012/1/23 DB????????????????????????????????? - Oracle ASM Cluster File System (ACFS)????! ??(WMV)??(MP4)2012/1/23 DB??????????????????/????·????????Flashback Database with SSD???(WMV)??(MP4)2011/10/17 DB???????????????????DB??????~RAC VM with SSD??(WMV)??(MP4)2011/1/11 DB????????Oracle???????????? SSD?????!??(WMV)??(MP4)2010/8/11 DB??????????????NAS??????!Oracle Database?I/O???????NFS????????????SSD?????????????(WMV)??(MP4)2012/1/23 DB????????????! ???????????? ~????·???????????????~??(WMV)??(MP4)2009/3/25 DB??????????!???????????????????(WMV)??(MP4)2011/3/15 DB???????????????????????!??????·?????????(WMV)??(MP4)2010/6/23 Windows/.Net?????????Oracle on Windows-???? OVM,Hyper-V????(WMV)??(MP4)2011/4/13 Windows/.Net????????Windows Server?Oracle?????!??(WMV)??(MP4)2010/5/19 Windows/.Net????????Oracle on Windows - ??????&???? ?????(WMV)??(MP4)2011/4/20 Windows/.Net??????.Net.NET + Oracle Database ??????????????????????(WMV)??(MP4)2012/1/23 Windows/.Net??????.Net.NET????????Oracle Database ??(WMV)??(MP4)2011/1/20 Windows/.Net??????.NetOracle on Windows-.NET+Oracle ???????(WMV)??(MP4)2011/6/28 Windows/.Net??????.NetVB6????.NET? ~DB????????????~??(WMV)??(MP4)2010/8/4 Windows/.Net??????.Net.NET+Oracle ???????????????????(WMV)??(MP4)2011/10/3 Windows/.Net??????Active Directory30????!Active Directory+Oracle??(WMV)??(MP4)2010/9/8 Windows/.Net??????AccessAccess????WEB?????????????????????????(WMV)??(MP4)2011/7/20 Windows/.Net??????Oracle Real Application ClustersWindows?RAC??!????????????(WMV)??(MP4)2010/9/1 Windows/.Net????????????Oracle on Windows ~???????~ ??(WMV)??(MP4)2011/1/18 Windows/.Net????????????Oracle on Windows ~???????~ ??(WMV)??(MP4)2011/1/20 Windows/.Net???????????MSCS????!?Windows+Oracle????????(WMV)??(MP4)2010/8/4 ???????11gR2???????!Oracle DB 11g???????/??????(WMV)??(MP4)2011/4/14 ???????11gR2???! Oracle Database 11g R2 ?????????(WMV)??(MP4)2010/11/17 ???????11gR2DB??????·??????????11g R2?????(WMV)??(MP4)2010/9/15 ????????????????DWH????????????????·??????????(WMV)??(MP4)2010/11/25 ????????????????DWH????????????????·??????????(WMV)??(MP4)2010/11/25 ????????????????DWH????????????????·??????????(WMV)??(MP4)2010/11/25 Database ?????????? ???? ?? ????????? ??? ?? Oracle Master Platinum??Oracle Real Application Clusters?Platinum???????Platinum???!?????? Oracle RAC ?????????(WMV)??(MP4)2010/1/26 Oracle Master Platinum??????????Platinum??????? Platinum???!???????Oracle??????????????(WMV)??(MP4)2010/4/21 Oracle Master Platinum????????Platinum??:?????????????????????(WMV)??(MP4)2010/5/26 Oracle Master Platinum????????·?????Platinum??????? Platinum???! ????????????·?????????(WMV)??(MP4)2010/3/9 ????????????????????????????!?????????&?????????(WMV)??(MP4)2012/1/23 ????????????????????????????!SQL????????? ??? Part1&2??(WMV)??(MP4)2010/10/12 ????????????????????????????!SQL????????? ??? Part3 ??(WMV)??(MP4)2010/10/19 ????????????????????????????!SQL????????? ??? Part4 ??(WMV)??(MP4)2011/1/27 ????????????????????????????!SQL????????? ??? Part5 ??(WMV)??(MP4)2011/1/27 ????????????????????????????!?????????????????????(WMV)??(MP4)2012/1/23 ????????????????????????????!????????? Part1 ??(WMV)??(MP4) - ????????????????????????????!????????? Part2 ??(WMV)??(MP4)2011/7/26 ????????????????????????????!????????? Part3 ??(WMV)??(MP4)2010/4/28 ????????????????????????????!??????? Part1 ??(WMV)??(MP4)2011/11/1 ????????????????????????????????????????? Part2 ??(WMV)??(MP4)2012/5/28 ????????????????????????????!???????????????????????????? ??(WMV)??(MP4)2012/1/23 ??????????????????????????!??????? Part1 ??(WMV)??(MP4)2011/2/10 ??????????????????????????!??????? Part2 ??(WMV)??(MP4)2011/3/23 ??????????????????????????!??????? Part3 ??(WMV)??(MP4)2011/4/26 ??????????????????????????!??????? Part4 ??(WMV)??(MP4)2011/5/26 ???????????Exadata???????????!Exadata???????????????????Tips??(WMV)??(MP4)2012/1/23 ?????????????????DB???????????!??TimesTen?????????? ??(WMV)??(MP4)2012/1/23 ???????????????????????????!GoldenGate?????????????????????(WMV)??(MP4)2012/1/23 ???????????EDA/CEP???????????!Oracle CEP?????????·?????????????(WMV)??(MP4)2012/1/23 ????????????????????????????????!???????????????????(WMV)??(MP4)2011/2/15 ???????????????????????????????RAC ????????????????(WMV)??(MP4)2012/1/23 ????????????????????????????????!Oracle Net ??????????????(WMV)??(MP4)2012/1/23 ?????????????????????????????:???????????????0??????(WMV)??(MP4)2010/5/19 ???????????????????????????!???????????????????????(WMV)??(MP4)2012/1/23 ?????????Oracle Real Application Clusters????????????!RAC????????????????????(WMV)??(MP4)2011/3/1 ???????Core Tech Oracle Database Core Tech SeminarOracle Data Guard,Oracle Recovery Manager(RMAN),Flashback??(WMV)??(MP4)2012/5/14 ???????Core Tech Oracle Database Core Tech SeminarOracle Real Application Clusters,Oracle Clusterware,Oracle Automatic Storage Management??(WMV)??(MP4)2012/5/14 ???????Big Data Appliance?????????????????????(WMV)??(MP4)2012/5/14 ???????Oracle Real Application ClustersRAC????10??!US Oracle??????????????Oracle Real Application Clusters????????????(WMV)??(MP4)2012/2/20 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ???????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ???????/?????????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c ???????/????????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ??????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ??????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ????????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ????????? ????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c Exadata?????(WMV)??(MP4)2012/1/23 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager 12c ???????????(WMV)??(MP4)2012/2/6 ???????Oracle Enterprise Manager 12cOracle Enterprise Manager???????????·?????????????(WMV)??(MP4)2012/5/14 ???????Database Appliance???????????1Box?????2???????? Oracle Database Appliance ??????(WMV)??(MP4)2011/12/19 ???????Database ApplianceOracle Database Appliance????????·????????(WMV)??(MP4)2012/5/14 ???????Oracle Data MiningOracle DB????!????????????(WMV)??(MP4)2010/9/14 ???????Oracle Data MiningOracleDB????????????(WMV)??(MP4)2011/6/29 OracleDirect ?????????????????!?????·???????ABC -Oracle Database???(WMV)??(MP4)2012/3/5 OracleDirect ???????????????????????-SE·EE??????-??(WMV)??(MP4)2010/5/19 OracleDirect ?????????????Oracle Database EE?SE???????????!???(WMV)??(MP4)2010/2/25 OracleDirect ????????????????98(????)???Oracle Database?????????! ~?????????????Oracle Database?????!~??(WMV)??(MP4)2009/12/2 OracleDirect ????????????!! Oracle Database????????(WMV)??(MP4)2010/10/13 OracleDirect ?????SQL?????????SQL?????????!SQL?????(WMV)??(MP4)2011/4/12 ???????????ACE????? ??Oracle Database???????(WMV)??(MP4)2012/5/14 ???????????????????????????????????????????? ??(WMV)??(MP4)2012/1/23 ????????????????!?????????????????·???????????? ????(WMV)??(MP4)2012/1/23 ????????????????!?????????????????·???????????? ????(WMV)??(MP4)2012/1/23 Java ???? ?? ????????? ??? ?? Java??Java EEJava EE 6 ??(132page)??(WMV)??(MP4)2011/04 Java?????!???????Java?????????(WMV)??(MP4)2011/06 Java??Java???????·???????????(WMV)??(MP4)2012/01 Java??Oracle ???? Java ??????? ??(WMV)??(MP4)2011/03 WebLogic Server/????????·???? ???? ?? ????????? ??? ?? WebLogic Server????Oracle????????WebLogic ????(WMV)??(MP4)2012/1/23 WebLogic Server????:????????? FastSwap??????·???????(??) ??(WMV)??(MP4)- WebLogic Server????:???????????????????(??)??(WMV)??(MP4)- WebLogic Server????:????????? ?????????????????????·??????????????????????(CAT)(??) ??(WMV)??(MP4)- WebLogic Server????:????????? ???????????????????????:????????????????????(??) ??(WMV)??(MP4)- WebLogic Server????:????????? JRockit Mission Control(??)??(WMV)??(MP4)- WebLogic Server????:????????? JRockit Flight Recorder????WebLogic????????????(??)??(WMV)??(MP4)- WebLogic Server????:????????? ?????????????? ???????????(??)??(WMV)??(MP4)- WebLogic Server????/???????????????????????????????????WebLogic????????(WMV)??(MP4)2011/3/24 WebLogic Server????WebLogic Server?JDBC??????????(WMV)??(MP4)2010/6/17 WebLogic Server????Oracle WebLogic Server???????Web??????? -???-??(WMV)??(MP4)2010/2/17 WebLogic Server????????????????? WebLogic Server ?????????????? ??(WMV)??(MP4)2012/1/23 WebLogic Server????????????????!WebLogic Scripting Tool?????WLS???·??????(WMV)??(MP4)2012/1/23 WebLogic Server????????????????????????~Oracle WebLogic Server 11g~??(WMV)??(MP4)2010/2/10 WebLogic Server????????????????!EM???WebLogic?????(WMV)??(MP4)2010/5/27 WebLogic Server ?????????????????WebLogic Server???????????????(WMV)??(MP4)2010/3/24 WebLogic Server????Oracle???????????????????????·????!??(WMV)??(MP4)2011/5/26 WebLogic Server??·????????OracleAS???????WebLogic Server??????????(WMV)??(MP4)2010/4/22 WebLogic ServerExalogicOracle Exalogic Elastic Cloud ?? ~ Exalogic ??? ~??(WMV)??(MP4)2012/1/23 JRockit??JVM JRockit?? ??Update??(WMV)??(MP4)2011/03 CoherenceOracle Coherence ?????·????????????????(WMV)??(MP4)2012/1/23 CoherenceOracle Coherence ????????????????(WMV)??(MP4)2012/1/23 Coherence???????????!???!Oracle Coherence?????????????????????????(WMV)??(MP4)2012/1/23 Coherence????????????Coherence??????(WMV)??(MP4)2011/04 SOA/BPM/????? ???? ?? ????????? ??? ?? BPM???????????BPM?????????????? ??(WMV)??(MP4)2011/04 BPMBPM Suite 11g??????????????????(WMV)??(MP4)2011/03 CEP??????????????????????????CEP????????(WMV)??(MP4)2011/04 ????????? ???? ?? ????????? ??? ?? ?????????????????????!???·????????????(WMV)??(MP4)2010/5/25 ???????Notes??????????????(WMV)??(MP4)2010/5/20 ???????Notes??13?????????????????????!??(WMV)??(MP4)2010/4/20 ??????????????????????Notes?????????????(WMV)??(MP4)2010/3/17 ???????Mashup Award5 ????????????????????????????????·?????????(WMV)??(MP4)2010/2/23 ID??/?????? ???? ?? ????????? ??? ?? ID????????????????!!~OracleDB?????????????????????????(WMV)??(MP4)2012/1/23 ID?????????????!????ID????????????(WMV)??(MP4)2010/6/15 ID???????????!????DB?OS?????/???????????(WMV)??(MP4)2010/1/27 ??????????/???????????????·???????????(WMV)??(MP4)2011/04 ?????????????~???????????????????(WMV)??(MP4)2011/4/5 ??????????!??ID·??????????????????(WMV)??(MP4)2010/12/7 ???????????????·???????????(WMV)??(MP4)2010/6/23 ?????EPM/BI EPM/BI ??????? ???? ?? ????????? ??? ?? ???BI????????????BI?????~5W1H1T?~??(WMV)??(MP4)2010/3/17 ???BI????????????BI?????~?????????~??(WMV)??(MP4)2010/2/24 ???????BI?????????? -Evidence-based Management- ??????????(WMV)??(MP4)2010/2/18 ???BI????????????BI?????~???KPI?~??(WMV)??(MP4)2010/1/28 EPM/BI ???? ???? ?? ????????? ??? ?? ??BIEE?????????????????(WMV)??(MP4)2010/3/10 OS/??? ???? ?? ????????? ??? ?? ???Solaris??????Oracle Solaris??????(WMV)??(MP4)2010/10/14 ???SolarisSolaris 10 ?? ~????Solaris???~??(WMV)??(MP4)2010/9/14 ???ZFSZFS ???! ZFS ???????(???)??(WMV)??(MP4)2011/11/21 ???ZFSZFS ???! ??????????????????(WMV)??(MP4)2010/9/28 ???LinuxOracle Linux?Unbreakable Enterprise Kernel?????(WMV)??(MP4)2011/11/21 ???LinuxOracle Linux Unbreakable Enterprise Kernel?????????(WMV)??(MP4)2012/5/14 ???Linux??????Oracle?????????Linux????(WMV)??(MP4)2010/5/25 ????????????????????????????????????(WMV)??(MP4)2012/1/6 ???????SolarisSolaris: ??????????????? ??(WMV)??(MP4)2011/1/27 ???????SolarisOracle Solaris 11????????????????? ??(WMV)??(MP4)2012/5/14 ???????SolarisSolaris ? DTrace ?????????????(WMV)??(MP4)2010/9/21 ???SolarisOracle Solaris 11 ??????????????-IPS ??????? ??(WMV)??(MP4)2012/5/14 ???SolarisSolaris ?????????????????????????????? ??(WMV)??(MP4)2012/5/14 ???ZFSZFS?Oracle UCM????????????? ??(WMV)??(MP4)2011/12/19 ???? ???? ?? ????????? ??? ?? ???SPARCSPARC ????? ~ OVM ???????!??(WMV)??(MP4)2011/12/5 ????? ???? ?? ????????? ??? ?? ???SAN????????????? Pillar Axiom 600 ???? ??(WMV)??(MP4)2012/4/23 ???ZFSOracleDB????SunStorage7000?????(WMV)??(MP4)2010/9/9 ????????!??????????????????????(WMV)??(MP4)2012/2/6 ???ZFS??S7000???:S7000????????????(WMV)??(MP4)2011/12/5 MySQL ???? ?? ????????? ??? ?? MySQL????MySQL????MySQL?????? ????????(WMV)??(MP4)2011/7/25 MySQL???MySQL??MySQL?? ?????(WMV)??(MP4)2012/1/23 MySQL???MySQL??MySQL?? ?????(WMV)??(MP4)2012/5/28 MySQL???MySQL??MySQL?? ???????(WMV)??(MP4)2012/6/25 MySQL???MySQL??MySQL???????(WMV)??(MP4)2011/7/25 MySQL????????????????MySQL ???????????????(WMV)??(MP4)2012/1/23 MySQL???MySQL Cluster MySQL Cluster ??????(WMV)??(MP4)2012/2/6 MySQL???MySQL Cluster MySQL Cluster 7.2 ??????(WMV)??(MP4)2012/3/19 MySQL??????? MySQL ????????(WMV)??(MP4)2012/2/6

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• Step Away From That Computer! You’re Not Qualified to Use It!

  - by Michael Sorens

  Most things tend to come with warnings and careful instructions these days, but sadly not one of the most ubiquitous appliances of all, your computer. If a chainsaw is missing its instructions, you’re well advised not to use it, even though you probably know roughly how it’s supposed to work. I confess, there are days when I feel the same way about computers. Long ago, during the renaissance of the computer age, it was possible to know everything about computers. But today, it is challenging to be fully knowledgeable even in one small area, and most people aren’t as savvy as they like to think. And, if I may borrow from Edwin Abbott Abbott’s classic Flatland, that includes me. And you. Need an example of what I mean? Take a look at almost any recent month’s batch of Windows updates. Just two quick questions for you: Do you need all of those updates? Is it safe to install all of those updates? I do software design and development for a living on Windows and the .NET platform, but I will be quite candid: I often have little clue what the heck some of those updates are going to do or why they are needed. So, if you do not know why they are needed or what they do, how do you know if they are safe? Of course, one can sidestep both questions by accepting Microsoft’s recommended Windows Update setting of “install updates automatically”. That leads you to infer that you need all of them (which is not always the case) and, more significantly, that they are safe. Quite safe. Ah, lest reality intrude upon such a pretty picture! Sadly, there is no such thing as risk-free software installation, and payloads from Windows Update are no exception. Earlier this year, a Windows Secrets Patch Watch article touted this headline: Keep this troublesome kernel update on hold. It discusses KB 2862330, a security update originally published more than 4 months earlier, and yet the article still recommends not installing it! Most people simply do not have the time, resources, or interest, to go about figuring out which updates to install or postpone or skip for safety reasons. Windows Secrets Patch Watch is the best service I have encountered for getting advice, but it is still no panacea and using the service effectively requires a degree of computer literacy that I still think is beyond a good number of people. Which brings us full circle: Step Away From That Computer! You’re Not Qualified to Use It!

  Read the article

• Oracle VM Templates for EBS 12.1.3 for Exalogic Now Available

  - by Elke Phelps (Oracle Development)

  Oracle VM Templates for Oracle E-Business Suite 12.1.3 for x86 Exalogic Platform (64 bit) are now available on the Oracle Software Delivery Cloud.  The templates contain all the required elements to create an Oracle E-Business Suite R12 demonstration system on an Exalogic server. You can use these templates to quickly build an EBS 12.1.3 demonstration environment, bypassing the operating system and the software install (via the EBS Rapid Install).   The Oracle E-Business Suite Release 12.1.3 (64 bit) template for the Exalogic platform is a Oracle Virtual Server Guest template that contains a complete Oracle E-Business Suite Release 12.1.3 Database Tier and Application Tier Installation.  For additional details, please refer to the following My Oracle Support Note: Oracle E-Business Suite Release 12.1.3 Database Tier and Application Tier Template for Oracle Exalogic Platform (Note 1499132.1) The Oracle E-Business Suite system is installed on top of Oracle Linux Version 5 update 6. The templates have been optimized for performance, including OS kernel settings and E-Business Suite configuration settings tuned specifically for the Exalogic platform.  The configuration delivered with this template for a mid-tier running on Exalogic will support hundreds of concurrent users.  Please refer to Section 2: Performance Analysis in My Oracle Support Note 1499132.1 for additional details.   Additional Information The Oracle E-Business Suite VM templates for the Exalogic platform contain the following software versions: Operating System: Oracle Linux Version 5 Update 6 Oracle E-Business Suite 12.1.3 (Database Tier) Oracle E-Business Suite 12.1.3 (Application Tier) The following considerations were made when the Oracle E-Business Suite VM template for the Exalogic platform were designed: Templates use the hardware-virtualized architecture, supporting hardware with virtualization feature. Database Tier Template is configured to use the following configuration: 16 GB RAM 4 VCPUs 250 GB of Disk space for application installation Application Tier Template is configured to use the following configuration: 16 GB RAM 4 VCPUs 50 GB of Disk space for application installation References Oracle E-Business Suite Release 12.1.3 Database Tier and Application Tier Template for Oracle Exalogic Platform (Note 1499132.1) Related Articles Part 1: E-Business Suite 12.1.1 Templates for Oracle VM Now Available Part 2: Using Oracle VM with Oracle E-Business Suite Virtualization Kit Part 3: On Clouds and Virtualization in EBS Environments (OpenWorld 2009 Recap) Part 4: Deploying E-Business Suite on Amazon Web Services Elastic Compute Cloud Part 5: Live Migration of EBS Services Using Oracle VM Support Policies for Virtualization Technologies and Oracle E-Business Suite Virtualization and the E-Business Suite, Redux Virtualization and E-Business Suite

  Read the article

• The winning combination: Oracle VM Server for x86 + Oracle Sun Fire HW

  - by Karim Berrah

  You might be wondering why OVM Server for x86 (OVM/x86 here and below) should be seriously considered as a nice (business point of view) alternative to standard Hypervisors, if you are virtualizing Oracle Software, especially if you are planning to move to Oracle x86 Hardware (rackmount or blades). Well, let see some "not well known" facts that might interest you and help you in saving more money for your entire company (and not only the Virtulization team). Fact 1: OVM/x86 is considered as a hard partitionning technology (check page 2 of Oracle Server Partitionning Licencing Policies), so if you are buying new servers based on the latest INTEL Xeon E7 CPUs (10 cores per Socket) and have some licencing issues in deploying further Oracle SW, because you are using a hypervisor not recognized as a hard partitionning technology (like VMware), then you need to check here how to do it with OVM . This might help you to continue to deploy your Oracle DB instances on new x86 HW (12 cores, 40 cores, 64 cores servers) in a reasonable way, without having to pay licences for 12 CPU, 40 CPUs or 64 CPUs. You might also consider migrating your legacy Oracle DB DBs to a virtualized environment like OVM/x86 an recover some CPU licences, that can be reused somewhere else in production. Fact 2: OVM/x86 is free to use, without any extra licence for any specific feature (LiveMigration, High Availability, Embedded Management Console). If you want to use it on non Oracle HW, there is a support fee per  system and per year, that is much below VMware support (Oracle VM Premier Limited Support for systems up to 2 CPUs, and Oracle VM Premier Support for any bigger system, independently on the number of populated sockets). Fact 3: support is included with your Oracle x86 HW support (OPS for systems)  and you can re-install on you system Oracle Linux, Oracle Solaris or Oracle VM server for x86, without beeing charged, an keeping the same support level. Fact 4: it is less expensive to virtualize Oracle Linux or Oracle Solaris on OVM/x86 with Oracle HW that any other similar solution with VMware, because all the VMs are then supported and licenced when you buy Oracle HW with OPS. Fact 5: Oracle VM Templates bring you many Virtual Machines already installed, patched and optimized for various Oracle applications. And to be more specific, those templates are fully supported by Oracle, which is not really true when it comes to another hypervisor. By optimized VM Kernel, I mean PV drivers, OVM-ready kernels in the VM, single source clock for all the VMS, better memory management of the VM ... Fact 6: there is no extra costs for a management console. OVM comes with a free OVM Manager package for Linux.  More infos: Latest announcement of OVM/x86 update 2.2.2 A short flash demo of OVM server for x86 A short flash demo on OVM Templates and Virtual Assembly Builder Oracle Linux Support and Oracle VM Support Global Price List  ISVs: Benefits for Independant Sofwtare Vendors (ISVs) in using OVM/x86 Consultant Services: Advanced Customer Services for OVM/x86  Technical Features Best practices and Guideline for OVM with Oracle Blades Reduce TCO and get more Value from your x86 Infrastructure

  Read the article

• Can't install graphic drivers in 12.04

  - by yinon

  The driver is ATI/AMD proprietary FGLRX graphics driver. After clicking Activate, it asks for my password and starts downloading. Then it shows an error message: 2012-10-03 16:16:04,227 DEBUG: updating <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> 2012-10-03 16:16:06,172 DEBUG: reading modalias file /lib/modules/3.2.0-29-generic-pae/modules.alias 2012-10-03 16:16:06,383 DEBUG: reading modalias file /usr/share/jockey/modaliases/b43 2012-10-03 16:16:06,386 DEBUG: reading modalias file /usr/share/jockey/modaliases/disable-upstream-nvidia 2012-10-03 16:16:06,456 DEBUG: loading custom handler /usr/share/jockey/handlers/pvr-omap4.py 2012-10-03 16:16:06,506 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-10-03 16:16:06,509 DEBUG: Instantiated Handler subclass __builtin__.PVROmap4Driver from name PVROmap4Driver 2012-10-03 16:16:06,682 DEBUG: PowerVR SGX proprietary graphics driver for OMAP 4 not available 2012-10-03 16:16:06,682 DEBUG: loading custom handler /usr/share/jockey/handlers/cdv.py 2012-10-03 16:16:06,727 WARNING: modinfo for module cedarview_gfx failed: ERROR: modinfo: could not find module cedarview_gfx 2012-10-03 16:16:06,728 DEBUG: Instantiated Handler subclass __builtin__.CdvDriver from name CdvDriver 2012-10-03 16:16:06,728 DEBUG: cdv.available: falling back to default 2012-10-03 16:16:06,772 DEBUG: Intel Cedarview graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,772 DEBUG: loading custom handler /usr/share/jockey/handlers/vmware-client.py 2012-10-03 16:16:06,781 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-10-03 16:16:06,781 DEBUG: Instantiated Handler subclass __builtin__.VmwareClientHandler from name VmwareClientHandler 2012-10-03 16:16:06,795 DEBUG: VMWare Client Tools availability undetermined, adding to pool 2012-10-03 16:16:06,796 DEBUG: loading custom handler /usr/share/jockey/handlers/fglrx.py 2012-10-03 16:16:06,801 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:06,805 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriverUpdate from name FglrxDriverUpdate 2012-10-03 16:16:06,805 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,833 DEBUG: ATI/AMD proprietary FGLRX graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:06,836 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:06,840 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriver from name FglrxDriver 2012-10-03 16:16:06,840 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,873 DEBUG: ATI/AMD proprietary FGLRX graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,873 DEBUG: loading custom handler /usr/share/jockey/handlers/dvb_usb_firmware.py 2012-10-03 16:16:06,925 DEBUG: Instantiated Handler subclass __builtin__.DvbUsbFirmwareHandler from name DvbUsbFirmwareHandler 2012-10-03 16:16:06,926 DEBUG: Firmware for DVB cards not available 2012-10-03 16:16:06,926 DEBUG: loading custom handler /usr/share/jockey/handlers/nvidia.py 2012-10-03 16:16:06,961 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-10-03 16:16:06,967 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96 from name NvidiaDriver96 2012-10-03 16:16:06,968 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:06,980 DEBUG: XorgDriverHandler(nvidia_96, nvidia-96, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:06,980 DEBUG: NVIDIA accelerated graphics driver not available 2012-10-03 16:16:06,983 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-10-03 16:16:06,987 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrent from name NvidiaDriverCurrent 2012-10-03 16:16:06,987 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,015 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,018 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-10-03 16:16:07,021 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrentUpdates from name NvidiaDriverCurrentUpdates 2012-10-03 16:16:07,022 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,066 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,069 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-10-03 16:16:07,072 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173Updates from name NvidiaDriver173Updates 2012-10-03 16:16:07,073 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,105 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,112 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-10-03 16:16:07,118 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173 from name NvidiaDriver173 2012-10-03 16:16:07,119 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,159 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,166 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-10-03 16:16:07,171 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96Updates from name NvidiaDriver96Updates 2012-10-03 16:16:07,171 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,188 DEBUG: XorgDriverHandler(nvidia_96_updates, nvidia-96-updates, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:07,188 DEBUG: NVIDIA accelerated graphics driver (post-release updates) not available 2012-10-03 16:16:07,188 DEBUG: loading custom handler /usr/share/jockey/handlers/madwifi.py 2012-10-03 16:16:07,195 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-10-03 16:16:07,195 DEBUG: Instantiated Handler subclass __builtin__.MadwifiHandler from name MadwifiHandler 2012-10-03 16:16:07,196 DEBUG: Alternate Atheros "madwifi" driver availability undetermined, adding to pool 2012-10-03 16:16:07,196 DEBUG: loading custom handler /usr/share/jockey/handlers/sl_modem.py 2012-10-03 16:16:07,213 DEBUG: Instantiated Handler subclass __builtin__.SlModem from name SlModem 2012-10-03 16:16:07,234 DEBUG: Software modem not available 2012-10-03 16:16:07,234 DEBUG: loading custom handler /usr/share/jockey/handlers/broadcom_wl.py 2012-10-03 16:16:07,239 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-10-03 16:16:07,277 DEBUG: Instantiated Handler subclass __builtin__.BroadcomWLHandler from name BroadcomWLHandler 2012-10-03 16:16:07,277 DEBUG: Broadcom STA wireless driver availability undetermined, adding to pool 2012-10-03 16:16:07,278 DEBUG: all custom handlers loaded 2012-10-03 16:16:07,278 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027D8sv00001043sd000082EAbc04sc03i00') 2012-10-03 16:16:07,568 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0000v0000p0000e0000-e0,5,kramlsfw6,') 2012-10-03 16:16:07,704 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,704 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,704 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00') 2012-10-03 16:16:07,707 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801'} 2012-10-03 16:16:07,707 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C01:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0B00:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001969d00001026sv00001043sd00008304bc02sc00i00') 2012-10-03 16:16:07,710 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'atl1e'} 2012-10-03 16:16:07,710 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'atl1e', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,710 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0003v04F2p0816e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:pcspkr') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp'} 2012-10-03 16:16:07,712 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v1D6Bp0001d0302dc09dsc00dp00ic09isc00ip00') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0019v0000p0001e0000-e0,1,k74,ramlsfw') 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C04:') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:eisa') 2012-10-03 16:16:07,725 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:Fixed MDIO bus') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00') 2012-10-03 16:16:07,731 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v045Ep0766d0101dcEFdsc02dp01ic01isc01ip00') 2012-10-03 16:16:07,777 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio'} 2012-10-03 16:16:07,777 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0F03:PNP0F13:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0000:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001002d000095C5sv0000174Bsd0000E400bc03sc00i00') 2012-10-03 16:16:08,072 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx_updates', 'package': 'fglrx-updates'} 2012-10-03 16:16:08,133 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,134 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,072 DEBUG: found match in handler pool xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,136 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:08,147 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,173 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,173 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,162 DEBUG: got handler xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,173 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx', 'package': 'fglrx'} 2012-10-03 16:16:08,184 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,184 DEBUG: fglrx is not the alternative in use 2012-10-03 16:16:08,173 DEBUG: found match in handler pool xorg:fglrx([FglrxDriver, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver) 2012-10-03 16:16:08,187 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:08,190 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,216 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None . . . 2012-10-03 16:18:10,552 DEBUG: install progress initramfs-tools 62.500000 2012-10-03 16:18:22,249 DEBUG: install progress libc-bin 62.500000 2012-10-03 16:18:23,251 DEBUG: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,256 ERROR: Package failed to install: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,590 WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver 2012-10-03 16:18:43,601 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,601 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:43,617 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,617 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,143 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,144 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,154 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,154 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,182 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,182 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:54,215 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,215 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,229 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,229 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,268 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,268 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,279 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,279 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,298 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,298 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:57,828 DEBUG: Shutting down I don't know how to troubleshoot from looking at the log file, could somebody assist me with this please? You can download the log file at: https://www.dropbox.com/s/a59d2hyabo02q5z/jockey.log

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work correcltly

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk PS: I could now install ubuntu with an external USB Keyboard/Mouse Set. But now, after showing the grub menu, a kernel panic error appears and booting stops :-/ Seems that the ubuntu images fit not to a macbook pro retina 13" (10,2) yet. PPS: Ok, there are new facts: If I edit the boot options and enter " nomodeset noapic" ubuntu starts and Keyboard and Touchpad work! Now I have to enable WiFi... PPPS: After installing Broadcom firmware from USB Live stick as described in other posts, WiFi was enabled. Then I could update ubuntu normally to 12.10. After this, I must not enter "nomodeset noapic" in the grub menu anymore. Last Thing now is the Touchpad. The driver seems not to be there. The touch pad is only showing as mouse. t.b.c.

  Read the article

• Ubuntu turns off instead of suspend / sleeping

  - by Marcos

  I'm using Ubuntu 11.10 on my notebook as the main OS. How ever, I've been facing a serious problem: Every time I try to suspend it, or it just stays idle for a while, the computer shuts down, instead of suspending. It actually seems to be suspended, but when I press the button the awake it, it turns on, the open works are all lost. How can i fix this? P.s: On windows 7 the suspend / sleep resumes just fine. Here is a complete list of hardware: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) 00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 02:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 80) 02:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 80) 02:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 80) 02:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03) I've updated the kernel to 3.2 still and hibernate or suspend is still not working. SWAP is 1/4 of my RAM.

  Read the article

• How do I get my blacked out ttys back?

  - by con-f-use

  Original Question: After I replaced my Ubuntu 10.10 with 11.04 all I get when I Strg+Alt+F1-6 into a tty is a black screen. Also when I boot there's a while of black screen after grub2 menu is displayed. Then until just before gnome starts it stays black. I have an Nvida Geforce Quadro FX 770M on my HP EliteBook 8530w. How do I get my ttys (aka 'virtual terminals') to work again? My effords in chronological order: So grub and gfx-payload seems to be the problem, I figured. I went along with this guide for higher tty resolution. Which led to the grub2 menu displaying in my native resolution rather than 800x600. The black screen problem remains. I googlehit some bugreports on other nvidia crads having that problem. I tried uninstalling the nvidia driver. No effect. Also tried different resolutions With an older version of the kernel it works. Though not perfectly. The ttys are usable, black screen between grub2 menu and gnome start remains. Not really a solution. Tried so much, that I lost track. Reinstalled grub2 and linux-image-2.6.38-8-generic. Then did this to my /etc/default/grub in accordance with the aforementioned guide (/etc/grub.d/00_header edited as well): GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=3 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` #GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_GFXMODE=1680x1050x32 To my surprise I can now use my ttys in native resolution. Black screen between grub2 menu and gnome login screen is still there though. That is annoying since I also use an encrypted disk thus having to enter my passphrase in total dark... Still looking for a solution but urgency is low. Downloaded and installed a later version of nvidia driver. No difference to last edit. Tried GRUB_CMDLINE_LINUX="vga="-parameter. No effect. nomodeset has no effect. not even in combination with vga=... Tried echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash no effect (see comment) On the verge of resignation... Bounty period soon to end.

  Read the article

• JRockit Virtual Edition Debug Key

  - by changjae.lee

  There are a few keys that can help the debugging of the JRVE env in console. you can type in each keys in JRVE console to see what's happening under the hood. key '0' : System information key '5' : Enable shutdown key '7' : Start JRockit Management Server (port 7091) key '8' : Statistics Counters key '9' : Full Thread Dump key '0' : Status of Debug-key Below is the sample out from each keys. Debug-key '1' pressed ============ JRockitVE System Information ============ JRockitVE version : 11.1.1.3.0-67-131044 Kernel version : 6.1.0.0-97-131024 JVM version : R27.6.6-28_o-125824-1.6.0_17-20091214-2104-linux-ia32 Hypervisor version : Xen 3.4.0 Boot state : 0x007effff Uptime : 0 days 02:04:31 CPU : uniprocessor @2327 Mhz CPU usage : 0% ctx/s: 285 preempt/s: 0 migrations/s: 0 Physical pages : 82379/261121 (321/1020 MB) Network info : 10.179.97.64 (10.179.97.64/255.255.254.0) GateWay : 10.179.96.1 MAC address : 00:16:3e:7e:dc:78 Boot options : vfsCwd : /application/user_projects/domains/wlsve_domain mainArgs : java -javaagent:/jrockitve/services/sshd/sshd.jar -cp /jrockitve/jrockit/lib/tools.jar:/jrockitve/lib/common.jar:/application/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/application/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.Name=WlsveAdmin -Dweblogic.Domain=wlsve_domain -Dweblogic.management.username=weblogic -Dweblogic.management.password=welcome1 -Dweblogic.management.GenerateDefaultConfig=true weblogic.Server consLog : /jrockitve/log/jrockitve.log mounts : ext2 / dev0; posixLocale : en_US posixTimezone : Asia/Seoul posixEncoding : ISO-8859-1 Local disk : Size: 1024M, Used: 728M, Free: 295M ======================================================== Debug-key '5' pressed Shutdown enabled. Debug-key '7' pressed [JRockit] Management server already started. Ignoring request. Debug-key '8' pressed Starting stat recording Debug-key '8' pressed ========= Statistics Counters for the last second ========= dev.eth0_rx.cnt : 22 packets dev.eth0_rx_bytes.cnt : 2704 bytes dev.net_interrupts.cnt : 22 interrupts evt.timer_ticks.cnt : 123 ticks hyper.priv_entries.cnt : 144 entries schedule.context_switches.cnt : 271 switches schedule.idle_cpu_time.cnt : 997318849 nanoseconds schedule.idle_cpu_time_0.cnt : 997318849 nanoseconds schedule.total_cpu_time.cnt : 1000031757 nanoseconds time.system_time.cnt : 1000 ns time.timer_updates.cnt : 123 updates time.wallclock_time.cnt : 1000 ns ======================================= Debug-key '9' pressed ===== FULL THREAD DUMP =============== Fri Jun 4 08:22:12 2010 BEA JRockit(R) R27.6.6-28_o-125824-1.6.0_17-20091214-2104-linux-ia32 "Main Thread" id=1 idx=0x4 tid=1 prio=5 alive, in native, waiting -- Waiting for notification on: weblogic/t3/srvr/T3Srvr@0x646ede8[fat lock] at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method) at java/lang/Object.wait(J)V(Native Method) at java/lang/Object.wait(Object.java:485) at weblogic/t3/srvr/T3Srvr.waitForDeath(T3Srvr.java:919) ^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr@0x646ede8[fat lock] at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:479) at weblogic/Server.main(Server.java:67) at jrockit/vm/RNI.c2java(IIIII)V(Native Method) -- end of trace "(Signal Handler)" id=2 idx=0x8 tid=2 prio=5 alive, in native, daemon Open lock chains ================ Chain 1: "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" id=23 idx=0x50 tid=20 waiting for java/lang/String@0x630c588 held by: "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" id=24 idx=0x54 tid=21 (active) ===== END OF THREAD DUMP =============== Debug-key '0' pressed Debug-keys enabled Happy Cloud Walking :)

  Read the article

• No HDMI audio in 13.04

  - by King84

  I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

  Read the article

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• Back-sliding into Unmanaged Code

  - by Laila

  It is difficult to write about Microsoft's ambivalence to .NET without mentioning clichés about dog food.  In case you've been away a long time, you'll remember that Microsoft surprised everyone with the speed and energy with which it introduced and evangelised the .NET Framework for managed code. There was good reason for this. Once it became obvious to all that it had sleepwalked into third place as a provider of development languages, behind Borland and Sun, it reacted quickly to attract the best talent in the industry to produce a windows version of the Java runtime, with Bounds-checking, Automatic Garbage collection, structures exception handling and common data types. To develop applications for this managed runtime, it produced several excellent languages, and more are being provided. The only thing Microsoft ever got wrong was to give it a stupid name. The logical step for Microsoft would be to base the entire operating system on the .NET framework, and to re-engineer its own applications. In 2002, Bill Gates, then Microsoft Chairman and Chief Software Architect said about their plans for .NET, "This is a long-term approach. These things don't happen overnight." Now, eight years later, we're still waiting for signs of the 'long-term approach'. Microsoft's vision of an entirely managed operating system has subsided since the Vista fiasco, but stays alive yet dormant as Midori, still being developed by Microsoft Research. This is an Internet-centric fork of the singularity operating system, a research project started in 2003 to build a highly-dependable operating system in which the kernel, device drivers, and applications are all written in managed code. Midori is predicated on the prevalence of connected systems, with provisions for distributed concurrency where application components exist 'in the cloud', and supports a programming model that can tolerate cancellation, intermittent connectivity and latency. It features an entirely new security model that sandboxes applications for increased security. So have Microsoft converted its existing applications to the .NET framework? It seems not. What Windows applications can run on Mono? Very few, it seems. We all thought that .NET spelt the end of DLL Hell and the need for COM interop, but it looks as if Bill Gates' idea of 'not overnight' might stretch to a decade or more. The Operating System has shown only minimal signs of migrating to .NET. Even where the use of .NET has come to dominate, when used for server applications with IIS, IIS itself is still entirely developed in unmanaged code. This is an irritation to Microsoft's greatest supporters who committed themselves fully to the NET framework, only to find parts of the Ambivalent Microsoft Empire quietly backsliding into unmanaged code and the awful C++. It is a strategic mistake that the invigorated Apple didn't make with the Mac OS X Architecture. Cheers, Laila

  Read the article

• Brendan Gregg's "Systems Performance: Enterprise and the Cloud"

  - by user12608550

  Long ago, the prerequisite UNIX performance book was Adrian Cockcroft's 1994 classic, Sun Performance and Tuning: Sparc & Solaris, later updated in 1998 as Java and the Internet. As Solaris evolved to include the invaluable DTrace observability features, new essential performance references have been published, such as Solaris Performance and Tools: DTrace and MDB Techniques for Solaris 10 and OpenSolaris (2006)  by McDougal, Mauro, and Gregg, and DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD (2011), also by Mauro and Gregg. Much has occurred in Solaris Land since those books appeared, notably Oracle's acquisition of Sun Microsystems in 2010 and the demise of the OpenSolaris community. But operating system technologies have continued to improve markedly in recent years, driven by stunning advances in multicore processor architecture, virtualization, and the massive scalability requirements of cloud computing. A new performance reference was needed, and I eagerly waited for something that thoroughly covered modern, distributed computing performance issues from the ground up. Well, there's a new classic now, authored yet again by Brendan Gregg, former Solaris kernel engineer at Sun and now Lead Performance Engineer at Joyent. Systems Performance: Enterprise and the Cloud is a modern, very comprehensive guide to general system performance principles and practices, as well as a highly detailed reference for specific UNIX and Linux observability tools used to examine and diagnose operating system behaviour.  It provides thorough definitions of terms, explains performance diagnostic Best Practices and "Worst Practices" (called "anti-methods"), and covers key observability tools including DTrace, SystemTap, and all the traditional UNIX utilities like vmstat, ps, iostat, and many others. The book focuses on operating system performance principles and expands on these with respect to Linux (Ubuntu, Fedora, and CentOS are cited), and to Solaris and its derivatives [1]; it is not directed at any one OS so it is extremely useful as a broad performance reference. The author goes beyond the intricacies of performance analysis and shows how to interpret and visualize statistical information gathered from the observability tools.  It's often difficult to extract understanding from voluminous rows of text output, and techniques are provided to assist with summarizing, visualizing, and interpreting the performance data. Gregg includes myriad useful references from the system performance literature, including a "Who's Who" of contributors to this great body of diagnostic tools and methods. This outstanding book should be required reading for UNIX and Linux system administrators as well as anyone charged with diagnosing OS performance issues.  Moreover, the book can easily serve as a textbook for a graduate level course in operating systems [2]. [1] Solaris 11, of course, and Joyent's SmartOS (developed from OpenSolaris) [2] Gregg has taught system performance seminars for many years; I have also taught such courses...this book would be perfect for the OS component of an advanced CS curriculum.

  Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >