Search Results

Search found 4118 results on 165 pages for 'attributes'.

Page 147/165 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• .Net Crystal Report printing application running on termianal service connection errors when session

  - by MrEdmundo

  I have created a .Net application to run on an App Server that gets requests for a report and prints out the requested report. The C# application uses Crystal Reports to load the report and subsequently print it out. The application is run on Server which is connected to via a Remote Desktop connection under a particular user account (required for old apps). When I disconnect from the Remote Session the application starts raising exceptions such as: Message: CrystalDecisions.Shared.CrystalReportsException: Load report failed This type of error is never raised when the Remote Session is active. The server running the app is running Windows Server 2003, my box which creates the connection is Windows XP. I appreciate this is fairly weird, however I cannot see any problem with the application deployment I have created. Does anyone know what could be cause this issue? EDIT: I bit the bullet and created the application as a windows service, obviously this doesn't take long I just wasn't convinced it would solve the problem. Anyway it doesn't!!! I have also tried removing the multi-thread code that was calling the print function asynchronously. I did this in order to simply the app and narrow down the reason it could fail. Anyway, this didn't improve the situation either! EDIT: The two errors I get are: System.Runtime.InteropServices.COMException (0x80000201): Invalid printer specified. at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal) at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) The printer isn't invalid, this is confirmed when 60 seconds later the time ticks and the report is printed successfully. And The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) EDIT: I ran filemon to check if there were any access issue. At the point when the error occurs file mon reports Request: OPEN | Path: C:\windows\assembly\gac_msil\system\2.0.0.0__b77a5c561934e089\ws2_32.dll | Result: NOT FOUND | Other: Attributes Error

  Read the article

• ASP.NET MVC 2 loading partial view using jQuery - no client side validation

  - by brainnovative

  I am using jQuery.load() to render a partial view. This part looks like this: $('#sizeAddHolder').load( '/MyController/MyAction', function () { ... }); The code for actions in my controller is the following: public ActionResult MyAction(byte id) { var model = new MyModel { ObjectProp1 = "Some text" }; return View(model); } [HttpPost] public ActionResult MyAction(byte id, FormCollection form) { // TODO: DB insert logic goes here var result = ...; return Json(result); } I am returning a partial view that looks something like this: <% using (Html.BeginForm("MyAction", "MyController")) {%> <%= Html.ValidationSummary(true) %> <h3>Create my object</h3> <fieldset> <legend>Fields</legend> <div class="editor-label"> <%= Html.LabelFor(model => model.ObjectProp1) %> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Size.ObjectProp1) %> <%= Html.ValidationMessageFor(model => model.ObjectProp1) %> </div> div class="editor-label"> <%= Html.LabelFor(model => model.ObjectProp2) %> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.ObjectProp2) %> <%= Html.ValidationMessageFor(model => model.ObjectProp2) %> </div> <p> <input type="submit" value="Create" /> </p> </fieldset> <% } %> Client side validation does not work in this case. What is more the script that contains validation messages also isn't included in the view that's returned. Both properties in my model class have Required and StringLength attributes. Is there any way to trigger client side validation in a view which has been loaded like this?

  Read the article

• MetadataType, inherited properties and client validation in ASP.NET MVC 2

  - by Kristoffer Ahl

  Inherited properties and MetadataType does not seem to work with client side validation in ASP.NET MVC 2. The validation of our MetadataTypes work as expected on the server but for some reason it does not generate the appropriate client scripts for it. Client side validation kicks in as expected for properties with the DataAnnotations attributes set on the PersonView so I know that client side validation is active and that it works. Does anyone know if or how it can be fixed? Here's what we have: public abstract class PersonView { public string FirstName { get; set; } public string LastName { get; set; } public string Email { get; set; } [Required] public string PhoneNumber { get; set; } public string AddressLine1 { get; set; } public string AddressLine2 { get; set; } public string AddressZipCode { get; set; } public string AddressCity { get; set; } public string AddressCountry { get; set; } } [MetadataType(typeof(CustomerViewMetaData))] public class CustomerView : PersonView {} [MetadataType(typeof(GuestViewMetaData))] public class GuestView : PersonView {} public class GuestViewMetaData { [Required(ErrorMessage = "The guests firstname is required")] public string FirstName { get; set; } [Required(ErrorMessage = "The guests lastname is required")] public string LastName { get; set; } } public class CustomerViewMetaData { [Required(ErrorMessage = "The customers firstname is required")] public string FirstName { get; set; } [Required(ErrorMessage = "The customers lastname is required")] public string LastName { get; set; } [Required(ErrorMessage = "The customers emails is required")] public string Email { get; set; } } As you can see, it's nothing fancy or strange in there... Can it be fixed? Is it a bug in ASP.NET MVC 2?

  Read the article

• [Java] RSA BadPaddingException : data must start with zero

  - by Robin Monjo

  Hello everyone. I try to implement an RSA algorithm in a Java program. I am facing the "BadPaddingException : data must start with zero". Here are the methods used to encrypt and decrypt my data : public byte[] encrypt(byte[] input) throws Exception { Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");// cipher.init(Cipher.ENCRYPT_MODE, this.publicKey); return cipher.doFinal(input); } public byte[] decrypt(byte[] input) throws Exception { Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");/// cipher.init(Cipher.DECRYPT_MODE, this.privateKey); return cipher.doFinal(input); } privateKey and publicKey attributes are read from files this way : public PrivateKey readPrivKeyFromFile(String keyFileName) throws IOException { PrivateKey key = null; try { FileInputStream fin = new FileInputStream(keyFileName); ObjectInputStream ois = new ObjectInputStream(fin); BigInteger m = (BigInteger) ois.readObject(); BigInteger e = (BigInteger) ois.readObject(); RSAPrivateKeySpec keySpec = new RSAPrivateKeySpec(m, e); KeyFactory fact = KeyFactory.getInstance("RSA"); key = fact.generatePrivate(keySpec); ois.close(); } catch (Exception e) { e.printStackTrace(); } return key; } Private key and Public key are created this way : public void Initialize() throws Exception { KeyPairGenerator keygen = KeyPairGenerator.getInstance("RSA"); keygen.initialize(2048); keyPair = keygen.generateKeyPair(); KeyFactory fact = KeyFactory.getInstance("RSA"); RSAPublicKeySpec pub = fact.getKeySpec(keyPair.getPublic(), RSAPublicKeySpec.class); RSAPrivateKeySpec priv = fact.getKeySpec(keyPair.getPrivate(), RSAPrivateKeySpec.class); saveToFile("public.key", pub.getModulus(), pub.getPublicExponent()); saveToFile("private.key", priv.getModulus(), priv.getPrivateExponent()); } and then saved in files : public void saveToFile(String fileName, BigInteger mod, BigInteger exp) throws IOException { FileOutputStream f = new FileOutputStream(fileName); ObjectOutputStream oos = new ObjectOutputStream(f); oos.writeObject(mod); oos.writeObject(exp); oos.close(); } I can't figured out how the problem come from. Any help would be appreciate ! Thanks in advance.

  Read the article

• 'NoneType' object has no attribute 'get' error using SQLAlchemy

  - by Az

  I've been trying to map an object to a database using SQLAlchemy but have run into a snag. Version info if handy: [OS: Mac OSX 10.5.8 | Python: 2.6.4 | SQLAlchemy: 0.5.8] The class I'm going to map: class Student(object): def __init__(self, name, id): self.id = id self.name = name self.preferences = collections.defaultdict(set) self.allocated_project = None self.allocated_rank = 0 def __repr__(self): return str(self) def __str__(self): return "%s %s" %(self.id, self.name) Background: Now, I've got a function that reads in the necessary information from a text database into these objects. The function more or less works and I can easily access the information from the objects. Before the SQLAlchemy code runs, the function will read in the necessary info and store it into the Class. There is a dictionary called students which stores this as such: students = {} students[id] = Student(<all the info from the various "reader" functions>) Afterwards, there is an "allocation" algorithm that will allocate projects to student. It does that well enough. The allocated_project remains as None if a student is unsuccessful in getting a project. SQLAlchemy bit: So after all this happens, I'd like to map my object to a database table. Using the documentation, I've used the following code to only map certain bits. I also begin to create a Session. from sqlalchemy import * from sqlalchemy.orm import * engine = create_engine('sqlite:///:memory:', echo=False) metadata = MetaData() students_table = Table('studs', metadata, Column('id', Integer, primary_key=True), Column('name', String) ) metadata.create_all(engine) mapper(Student, students_table) Session = sessionmaker(bind=engine) sesh = Session() Now after that, I was curious to see if I could print out all the students from my students dictionary. for student in students.itervalues(): print student What do I get but an error: Traceback (most recent call last): File "~/FYP_Tests/FYP_Tests.py", line 140, in <module> print student File "/~FYP_Tests/Parties.py", line 30, in __str__ return "%s %s" %(self.id, self.name) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/SQLAlchemy-0.5.8-py2.6.egg/sqlalchemy/orm/attributes.py", line 158, in __get__ return self.impl.get(instance_state(instance), instance_dict(instance)) AttributeError: 'NoneType' object has no attribute 'get' I'm at a loss as to how to resolve this issue, if it is an issue. If more information is required, please ask and I will provide it.

  Read the article

• Specifying Android project dependencies (in Eclipse)

  - by Henrik Gustafsson

  I have two Android projects, a 'library project' containing a custom layout, and an 'application project' containing an application which uses the layout. Everything seems to build and execute fine, except that the visual layout editor throws a ClassNotFoundException (which I assume is a bug in the plug-in), but when I try to start to make use of the attributes I defined for the custom layout in the xml, I can no longer build. That is; this works: <?xml version="1.0" encoding="utf-8"?> <se.fnord.android.layout.PredicateLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="asdfasdf" /> </se.fnord.android.layout.PredicateLayout> Whereas this does not: <?xml version="1.0" encoding="utf-8"?> <se.fnord.android.layout.PredicateLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:fnord="http://schemas.android.com/apk/res/se.fnord.android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView fnord:layout_horizontalSpacing="1px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="asdfasdf" /> </se.fnord.android.layout.PredicateLayout> The build fails with a message from aapt: ERROR No resource identifier found for attribute 'layout_horizontalSpacing' in package 'se.fnord.android' The resource identifier does exist in the R-file and attrs.xml contained the library project, and if I put the layout code and resources directly in the application project everything works fine. The layout_horizontalSpacing attribute (and layout_verticalSpacing) is a custom attribute used in the PredicateLayout.LayoutParam class to specify the distance to the next widget. So far I've tried the standard eclipse ways by specifying project references and build path project dependencies. I was also told to try the tag in the application manifest, which did not help. So, what do I need to do for the references in the xml-file to work? I don't know if it's relevant, but the 'library' manifest looks like this: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="se.fnord.android" android:versionCode="1" android:versionName="1.0.0"> </manifest> The 'application' manifest like this: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="se.fnord.appname" android:versionCode="1" android:versionName="1.0.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".AppName" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> </manifest> (The 'PredicateLayout', btw, is a cleaned-up version of this).

  Read the article

• Asp.Net MVC Data Annotations. How to get client side validation on 2 properties being equal

  - by Mark

  How do you get client side validation on two properties such as the classic password confirm password scenario. I'm using a metadata class based on EF mapping to my DB table, heres the code. The commented out attributes on my class will get me server side validation but not client side. [MetadataType(typeof(MemberMD))] public partial class Member { //[CustomValidation(typeof(MemberMD), "Verify", ErrorMessage = "The password and confirmation password did not match.")] //[PropertiesMustMatch("Password", "ConfirmPassword", ErrorMessage = "The password and confirmation password did not match.")] public class MemberMD { [Required(ErrorMessage = "Name is required.")] [StringLength(50, ErrorMessage = "No more than 50 characters")] public object Name { get; set; } [Required(ErrorMessage = "Email is required.")] [StringLength(50, ErrorMessage = "No more than 50 characters.")] [RegularExpression(".+\\@.+\\..+", ErrorMessage = "Valid email required e.g. [email protected]")] public object Email { get; set; } [Required(ErrorMessage = "Password is required.")] [StringLength(30, ErrorMessage = "No more than 30 characters.")] [RegularExpression("[\\S]{6,}", ErrorMessage = "Must be at least 6 characters.")] public object Password { get; set; } [Required] public object ConfirmPassword { get; set; } [Range(0, 150), Required] public object Age { get; set; } [Required(ErrorMessage = "Postcode is required.")] [RegularExpression(@"^[a-zA-Z0-9 ]{1,10}$", ErrorMessage = "Postcode must be alphanumeric and no more than 10 characters in length")] public object Postcode { get; set; } [DisplayName("Security Question")] [Required] public object SecurityQuestion { get; set; } [DisplayName("Security Answer")] [Required] [StringLength(50, ErrorMessage = "No more than 50 characters.")] public object SecurityAnswer { get; set; } public static ValidationResult Verify(MemberMD t) { if (t.Password == t.ConfirmPassword) return ValidationResult.Success; else return new ValidationResult(""); } } Any help would be greatly appreciated, as I have only been doing this 5 months please try not to blow my mind.

  Read the article

• Asynchronous callback for network in Objective-C Iphone

  - by vodkhang

  I am working with network request - response in Objective-C. There is something with asynchronous model that I don't understand. In summary, I have a view that will show my statuses from 2 social networks: Twitter and Facebook. When I clicked refresh, it will call a model manager. That model manager will call 2 service helpers to request for latest items. When 2 service helpers receive data, it will pass back to model manager and this model will add all data into a sorted array. What I don't understand here is that : when response from social networks come back, how many threads will handle the response. From my understanding about multithreading and networking (in Java), there must have 2 threads handle 2 responses and those 2 threads will execute the code to add the responses to the array. So, it can have race condition and the program can go wrong right? Is it the correct working model of iphone objective-C? Or they do it in a different way that it will never have race condition and we don't have to care about locking, synchronize? Here is my example code: ModelManager.m - (void)updateMyItems:(NSArray *)items { self.helpers = [self authenticatedHelpersForAction:NCHelperActionGetMyItems]; for (id<NCHelper> helper in self.helpers) { [helper updateMyItems:items]; // NETWORK request here } } - (void)helper:(id <NCHelper>)helper didReturnItems:(NSArray *)items { [self helperDidFinishGettingMyItems:items callback:@selector(model:didGetMyItems:)]; break; } } // some private attributes int *_currentSocialNetworkItemsCount = 0; // to count the number of items of a social network - (void)helperDidFinishGettingMyItems:(NSArray *)items { for (Item *item in items) { _currentSocialNetworkItemsCount ++; } NSLog(@"count: %d", _currentSocialNetworkItemsCount); _currentSocialNetworkItemsCount = 0; } I want to ask if there is a case that the method helperDidFinishGettingMyItems is called concurrently. That means, for example, faceboook returns 10 items, twitter returns 10 items, will the output of count will ever be larger than 10? And if there is only one single thread, how can the thread finishes parsing 1 response and jump to the other response because, IMO, thread is only executed sequently, block of code by block of code

  Read the article

• Connecting to Active Directory Application Mode from Perl

  - by Khurram Aziz

  I am trying to connect to Active Directory Application Mode instance. The instance is conenctable from third party LDAP clients like Softerra LDAP Browser. But I am getting the following error when connecting from Perl Net::LDAP=HASH(0x876d8e4) sending: Net::LDAP=HASH(0x876d8e4) received: 30 84 00 00 00 A7 02 01 02 65 84 00 00 00 9E 0A 0........e...... 01 01 04 00 04 84 00 00 00 93 30 30 30 30 30 34 ..........000004 44 43 3A 20 4C 64 61 70 45 72 72 3A 20 44 53 49 DC: LdapErr: DSI 44 2D 30 43 30 39 30 36 32 42 2C 20 63 6F 6D 6D D-0C09062B, comm 65 6E 74 3A 20 49 6E 20 6F 72 64 65 72 20 74 6F ent: In order to 20 70 65 72 66 6F 72 6D 20 74 68 69 73 20 6F 70 perform this op 65 72 61 74 69 6F 6E 20 61 20 73 75 63 63 65 73 eration a succes 73 66 75 6C 20 62 69 6E 64 20 6D 75 73 74 20 62 sful bind must b 65 20 63 6F 6D 70 6C 65 74 65 64 20 6F 6E 20 74 e completed on t 68 65 20 63 6F 6E 6E 65 63 74 69 6F 6E 2E 2C 20 he connection., 64 61 74 61 20 30 2C 20 76 65 63 65 00 __ __ __ data 0, vece.` My directory structure is Partition: CN=Apps,DC=MyCo,DC=COM User exists as CN=myuser,CN=Apps,DC=MyCo,DC=COM I have couple of other entries of the custom class which I am interested to browse; those instances appear fine in ADSI Edit, Softerra LDAP Browser etc. I am new to Perl....My perl code is #!/usr/bin/perl use Net::LDAP; $ldap = Net::LDAP->new("127.0.0.1", debug => 2, user => "CN=myuser,CN=Apps,DC=MyCo,DC=COM", password => "secret" ) or die "$@"; $ldap->bind(version => 3) or die "$@"; print "Connected to ldap\n"; $mesg = $ldap->search( filter => "(objectClass=*)" ) or die ("Failed on search.$!"); my $max = $mesg->count; print "$max records found!\n"; for( my $index = 0 ; $index < $max ; $index++) { my $entry = $mesg->entry($index); my $dn = $entry->dn; @attrs = $entry->attributes; foreach my $var (@attrs) { $attr = $entry->get_value( $var, asref => 1 ); if ( defined($attr) ) { foreach my $value ( @$attr ) { print "$var: $value\n"; } } } } $ldap->unbind();

  Read the article

• NSObjectController confusion binding to a class property. Help!

  - by scottw

  Hi, I'm teaching myself cocoa and enjoying the experience most of the time. I have been struggling all day with a simple problem that google has let me down on. I have read the Cocoa Bindings Program Topics and think I grok it but still can't solve my issue. I have a very simple class called MTSong that has various properties. I have used @synthesize to create getter/setters and can use KVC to change properties. i.e in my app controller the following works: mySong = [[MTSong alloc]init]; [mySong setValue:@"2" forKey:@"version"]; In case I am doing something noddy in my class code MTSong.h is: #import <Foundation/Foundation.h> @interface MTSong : NSObject { NSNumber *version; NSString *name; } @property(readwrite, assign) NSNumber *version; @property(readwrite, assign) NSString *name; @end and MTSong.m is: #import "MTSong.h" @implementation MTSong - (id)init { [super init]; return self; } - (void)dealloc { [super dealloc]; } @synthesize version; @synthesize name; @end In Interface Builder I have a label (NSTextField) that I want to update whenever I use KVC to change the version of the song. I do the following: Drag NSObjectController object into the doc window and in the Inspector-Attributes I set: Mode: Class Class Name: MTSong Add a key called version and another called name Go to Inspector-Bindings-Controller Content Bind To: File's Owner (Not sure this is right...) Model Key Path: version Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: mySong Model Key Path: version I have attempted changing the Model Key Path in step 2 to "mySong" which makes more sense but the compiler complains. Any suggestions would be greatly appreciated. Scott Update Post Comments I wasn't exposing mySong property so have changed my AppController.h to be: #import <Cocoa/Cocoa.h> @class MTSong; @interface AppController : NSObject { IBOutlet NSButton *start; IBOutlet NSTextField *tf; MTSong *mySong; } -(IBAction)convertFile:(id)sender; @end I suspect File's owner was wrong as I am not using a document based application and I need to bind to the AppController, so step 2 is now: Go to Inspector-Bindings-Controller Content Bind To: App Controller Model Key Path: mySong I needed to change 3. to Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: selection Model Key Path: version All compiles and is playing nice!

  Read the article

• How to inherit from DataAnnotations.ValidationAttribute (it appears SecureCritical under Visual Stud

  - by codetuner

  Hi, I have an [AllowPartiallyTrustedCallers] class library containing subtypes of the System.DataAnnotations.ValidationAttribute. The library is used on contract types of WCF services. In .NET 2/3.5, this worked fine. Since .NET 4.0 however, running a client of the service in the Visual Studio debugger results in the exception "Inheritance security rules violated by type: '(my subtype of ValidationAttribute)'. Derived types must either match the security accessibility of the base type or be less accessible." (System.TypeLoadException) The error appears to occure only when all of the following conditions are met: a subclass of ValidationAttribute is in an AllowPartiallyTrustedCallers assembly reflection is used to check for the attribute the Visual Studio hosting process is enabled (checkbox on Project properties, Debug tab) So basically, in Visual Studio.NET 2010: create a new Console project, add a reference to "System.ComponentModel.DataAnnotations" 4.0.0.0, write the following code: . using System; [assembly: System.Security.AllowPartiallyTrustedCallers()] namespace TestingVaidationAttributeSecurity { public class MyValidationAttribute : System.ComponentModel.DataAnnotations.ValidationAttribute { } [MyValidation] public class FooBar { } class Program { static void Main(string[] args) { Console.WriteLine("ValidationAttribute IsCritical: {0}", typeof(System.ComponentModel.DataAnnotations.ValidationAttribute).IsSecurityCritical); FooBar fb = new FooBar(); fb.GetType().GetCustomAttributes(true); Console.WriteLine("Press enter to end."); Console.ReadLine(); } } } Press F5 and you get the exception ! Press Ctrl-F5 (start without debugging), and it all works fine without exception... The strange thing is that the ValidationAttribute will or will not be securitycritical depending on the way you run the program (F5 or Ctrl+F5). As illustrated by the Console.WriteLine in the above code. But then again, this appear to happen with other attributes (and types?) too. Now the questions... Why do I have this behaviour when inheriting from ValidationAttribute, but not when inheriting from System.Attribute ? (Using Reflector I don't find special settings on the ValidationAttribute class or it's assembly) And what can I do to solve this ? How can I keep MyValidationAttribute inheriting from ValidationAttribute in an AllowPartiallyTrustedCallers assembly without marking it SecurityCritical, still using the new .NET 4 level 2 security model and still have it work using the VS.NET debug host (or other hosts) ?? Thanks a lot! Rudi

  Read the article

• Color Theory: How to convert Munsell HVC to RGB/HSB/HSL

  - by Ian Boyd

  I'm looking at at document that describes the standard colors used in dentistry to describe the color of a tooth. They quote hue, value, chroma values, and indicate they are from the 1905 Munsell description of color: The system of colour notation developed by A. H. Munsell in 1905 identifies colour in terms of three attributes: HUE, VALUE (Brightness) and CHROMA (saturation) [15] HUE (H): Munsell defined hue as the quality by which we distinguish one colour from another. He selected five principle colours: red, yellow, green, blue, and purple; and five intermediate colours: yellow-red, green-yellow, blue-green, purple-blue, and red-purple. These were placed around a colour circle at equal points and the colours in between these points are a mixture of the two, in favour of the nearer point/colour (see Fig 1.). VALUE (V): This notation indicates the lightness or darkness of a colour in relation to a neutral grey scale, which extends from absolute black (value symbol 0) to absolute white (value symbol 10). This is essentially how ‘bright’ the colour is. CHROMA (C): This indicates the degree of divergence of a given hue from a neutral grey of the same value. The scale of chroma extends from 0 for a neutral grey to 10, 12, 14 or farther, depending upon the strength (saturation) of the sample to be evaluated. There are various systems for categorising colour, the Vita system is most commonly used in Dentistry. This uses the letters A, B, C and D to notate the hue (colour) of the tooth. The chroma and value are both indicated by a value from 1 to 4. A1 being lighter than A4, but A4 being more saturated than A1. If placed in order of value, i.e. brightness, the order from brightest to darkest would be: A1, B1, B2, A2, A3, D2, C1, B3, D3, D4, A3.5, B4, C2, A4, C3, C4 The exact values of Hue, Value and Chroma for each of the shades is shown below (16) So my question is, can anyone convert Munsell HVC into RGB, HSB or HSL? Hue Value (Brightness) Chroma(Saturation) === ================== ================== 4.5 7.80 1.7 2.4 7.45 2.6 1.3 7.40 2.9 1.6 7.05 3.2 1.6 6.70 3.1 5.1 7.75 1.6 4.3 7.50 2.2 2.3 7.25 3.2 2.4 7.00 3.2 4.3 7.30 1.6 2.8 6.90 2.3 2.6 6.70 2.3 1.6 6.30 2.9 3.0 7.35 1.8 1.8 7.10 2.3 3.7 7.05 2.4 They say that Value(Brightness) varies from 0..10, which is fine. So i take 7.05 to mean 70.5%. But what is Hue measured in? i'm used to hue being measured in degrees (0..360). But the values i see would all be red - when they should be more yellow, or brown. Finally, it says that Choma/Saturation can range from 0..10 ...or even higher - which makes it sound like an arbitrary scale. So can anyone convert Munsell HVC to HSB or HSL, or better yet, RGB?

  Read the article

• How to call function that inside JQuery Plugin From outside the plugin?

  - by CaTz

  hi, i am using textarea elastic plugin JQuery. this is the plugin (function(jQuery){ jQuery.fn.extend({ elastic: function() { // We will create a div clone of the textarea // by copying these attributes from the textarea to the div. var mimics = [ 'paddingTop', 'paddingRight', 'paddingBottom', 'paddingLeft', 'fontSize', 'lineHeight', 'fontFamily', 'width', 'fontWeight']; return this.each( function() { // Elastic only works on textareas if ( this.type != 'textarea' ) { return false; } var $textarea = jQuery(this), $twin = jQuery('<div />').css({'position': 'absolute','display':'none','word-wrap':'break-word'}), lineHeight = parseInt($textarea.css('line-height'),10) || parseInt($textarea.css('font-size'),'10'), minheight = parseInt($textarea.css('height'),10) || lineHeight*3, maxheight = parseInt($textarea.css('max-height'),10) || Number.MAX_VALUE, goalheight = 0, i = 0; // Opera returns max-height of -1 if not set if (maxheight < 0) { maxheight = Number.MAX_VALUE; } // Append the twin to the DOM // We are going to meassure the height of this, not the textarea. $twin.appendTo($textarea.parent()); // Copy the essential styles (mimics) from the textarea to the twin var i = mimics.length; while(i--){ $twin.css(mimics[i].toString(),$textarea.css(mimics[i].toString())); } // Sets a given height and overflow state on the textarea function setHeightAndOverflow(height, overflow){ curratedHeight = Math.floor(parseInt(height,10)); if($textarea.height() != curratedHeight){ $textarea.css({'height': curratedHeight + 'px','overflow':overflow}); } } // This function will update the height of the textarea if necessary function update() { // Get curated content from the textarea. var textareaContent = $textarea.val().replace(/&/g,'&amp;').replace(/ /g, '&nbsp;').replace(/<|>/g, '&gt;').replace(/\n/g, '<br />'); var twinContent = $twin.html(); if(textareaContent+'&nbsp;' != twinContent){ // Add an extra white space so new rows are added when you are at the end of a row. $twin.html(textareaContent+'&nbsp;'); // Change textarea height if twin plus the height of one line differs more than 3 pixel from textarea height if(Math.abs($twin.height()+lineHeight/3 - $textarea.height()) > 3){ var goalheight = $twin.height()+lineHeight/3; if(goalheight >= maxheight) { setHeightAndOverflow(maxheight,'auto'); } else if(goalheight <= minheight) { setHeightAndOverflow(minheight,'hidden'); } else { setHeightAndOverflow(goalheight,'hidden'); } } } } // Hide scrollbars $textarea.css({'overflow':'hidden'}); // Update textarea size on keyup $textarea.keyup(function(){ update(); }); $textarea.focus(function(){ update(); }); // And this line is to catch the browser paste event $textarea.live('input paste',function(e){ setTimeout( update, 250); }); // Run update once when elastic is initialized update(); }); } }); })(jQuery); How can i call from the outside of the plugin to the update function that is inside?

  Read the article

• NameClaimType in ClaimsIdentity from SAML

  - by object88

  I am attempting to understand the world of WIF in context of a WCF Data Service / REST / OData server. I have a hacked up version of SelfSTS that is running inside a unit test project. When the unit tests start, it kicks off a WCF service, which generates my SAML token. This is the SAML token being generated: <saml:Assertion MajorVersion="1" MinorVersion="1" ... > <saml:Conditions>...</saml:Conditions> <saml:AttributeStatement> <saml:Subject> <saml:NameIdentifier Format="EMAIL">4bd406bf-0cf0-4dc4-8e49-57336a479ad2</saml:NameIdentifier> <saml:SubjectConfirmation>...</saml:SubjectConfirmation> </saml:Subject> <saml:Attribute AttributeName="emailaddress" AttributeNamespace="http://schemas.xmlsoap.org/ws/2005/05/identity/claims"> <saml:AttributeValue>[email protected]</saml:AttributeValue> </saml:Attribute> <saml:Attribute AttributeName="name" AttributeNamespace="http://schemas.xmlsoap.org/ws/2005/05/identity/claims"> <saml:AttributeValue>bob</saml:AttributeValue> </saml:Attribute> </saml:AttributeStatement> <ds:Signature>...</ds:Signature> </saml:Assertion> (I know the Format of my NameIdentifier isn't really EMAIL, this is something I haven't gotten to cleaning up yet.) Inside my actual server, I put some code borrowed from Pablo Cabraro / Cibrax. This code seems to run A-OK, although I confess that I don't understand what's happening. I note that later in my code, when I need to check my identity, Thread.CurrentPrincipal.Identity is an instance of Microsoft.IdentityModel.Claims.ClaimsIdentity, which has a claim for all the attributes, plus a nameidentifier claim with the value in my NameIdentifier element in saml:Subject. It also has a property NameClaimType, which points to "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name". It would make more sense if NameClaimType mapped to nameidentifier, wouldn't it? How do I make that happen? Or am I expecting the wrong thing of the name claim? Thanks!

  Read the article

• Page expired issue with back button and wicket SortableDataProvider and DataTable

  - by David

  Hi, I've got an issue with SortableDataProvider and DataTable in wicket. I've defined my DataTable as such: IColumn<Column>[] columns = new IColumn[9]; //column values are mapped to the private attributes listed in ColumnImpl.java columns[0] = new PropertyColumn(new Model("#"), "columnPosition", "columnPosition"); columns[1] = new PropertyColumn(new Model("Description"), "description"); columns[2] = new PropertyColumn(new Model("Type"), "dataType", "dataType"); Adding it to the table: DataTable<Column> dataTable = new DataTable<Column>("columnsTable", columns, provider, maxRowsPerPage) { @Override protected Item<Column> newRowItem(String id, int index, IModel<Column> model) { return new OddEvenItem<Column>(id, index, model); } }; My data provider: public class ColumnSortableDataProvider extends SortableDataProvider<Column> { private static final long serialVersionUID = 1L; private List list = null; public ColumnSortableDataProvider(Table table, String sortProperty) { this.list = Arrays.asList(table.getColumns().toArray(new Column[0])); setSort(sortProperty, true); } public ColumnSortableDataProvider(List list, String sortProperty) { this.list = list; setSort(sortProperty, true); } @Override public Iterator iterator(int first, int count) { /* first - first row of data count - minimum number of elements to retrieve So this method returns an iterator capable of iterating over {first, first+count} items */ Iterator iterator = null; try { if(getSort() != null) { Collections.sort(list, new Comparator() { private static final long serialVersionUID = 1L; @Override public int compare(Column c1, Column c2) { int result=1; PropertyModel<Comparable> model1= new PropertyModel<Comparable>(c1, getSort().getProperty()); PropertyModel<Comparable> model2= new PropertyModel<Comparable>(c2, getSort().getProperty()); if(model1.getObject() == null && model2.getObject() == null) result = 0; else if(model1.getObject() == null) result = 1; else if(model2.getObject() == null) result = -1; else result = ((Comparable)model1.getObject()).compareTo(model2.getObject()); result = getSort().isAscending() ? result : -result; return result; } }); } if (list.size() (first+count)) iterator = list.subList(first, first+count).iterator(); else iterator = list.iterator(); } catch (Exception e) { e.printStackTrace(); } return iterator; } The problem is the following: - I click a column header to sort by that column. - I navigate to a different page - I click Back (or Forward if I do the opposite scenario) - Page has expired. It'd be nice to generate the page using PageParameters but I somehow need to intercept the sort event to do so. Any pointers would be greatly appreciated. Thanks a ton!! David

  Read the article

• What is the semantically correct way to use the `<article>` tag in HTML 5, with `<ol>, <ul>, and <li

  - by viatropos

  I currently have an ordered list that I want to markup using the new HTML 5 attributes. It looks like this: <ol class="section"> <li class="article"> <h2>Article A</h2> <p>Some text</p> </li> <li class="article"> <h2>Article B</h2> <p>Some text</p> </li> <li class="article"> <h2>Article C</h2> <p>Some text</p> </li> </ol> It seems the only way to keep the list AND use HTML 5 tags is to add a whole bunch of unnecessary divs: <section> <ol> <li> <article> <h2>Article A</h2> <p>Some text</p> </article> </li> <li> <article> <h2>Article B</h2> <p>Some text</p> </article> </li> <li> <article> <h2>Article C</h2> <p>Some text</p> </article> </li> </ol> </section> Is there a better way to do this? What are your thoughts?

  Read the article

• NSXMLParser Memory Allocation Efficiency for the iPhone

  - by Staros

  Hello, I've recently been playing with code for an iPhone app to parse XML. Sticking to Cocoa, I decided to go with the NSXMLParser class. The app will be responsible for parsing 10,000+ "computers", all which contain 6 other strings of information. For my test, I've verified that the XML is around 900k-1MB in size. My data model is to keep each computer in an NSDictionary hashed by a unique identifier. Each computer is also represented by a NSDictionary with the information. So at the end of the day, I end up with a NSDictionary containing 10k other NSDictionaries. The problem I'm running into isn't about leaking memory or efficient data structure storage. When my parser is done, the total amount of allocated objects only does go up by about 1MB. The problem is that while the NSXMLParser is running, my object allocation is jumping up as much as 13MB. I could understand 2 (one for the object I'm creating and one for the raw NSData) plus a little room to work, but 13 seems a bit high. I can't imaging that NSXMLParser is that inefficient. Thoughts? Code... The code to start parsing... NSXMLParser *parser = [[NSXMLParser alloc] initWithData: data]; [parser setDelegate:dictParser]; [parser parse]; output = [[dictParser returnDictionary] retain]; [parser release]; [dictParser release]; And the parser's delegate code... -(void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qualifiedName attributes:(NSDictionary *)attributeDict { if(mutableString) { [mutableString release]; mutableString = nil; } mutableString = [[NSMutableString alloc] init]; } -(void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if(self.mutableString) { [self.mutableString appendString:string]; } } -(void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if([elementName isEqualToString:@"size"]){ //The initial key, tells me how many computers returnDictionary = [[NSMutableDictionary alloc] initWithCapacity:[mutableString intValue]]; } if([elementName isEqualToString:hashBy]){ //The unique identifier if(mutableDictionary){ [mutableDictionary release]; mutableDictionary = nil; } mutableDictionary = [[NSMutableDictionary alloc] initWithCapacity:6]; [returnDictionary setObject:[NSDictionary dictionaryWithDictionary:mutableDictionary] forKey:[NSMutableString stringWithString:mutableString]]; } if([fields containsObject:elementName]){ //Any of the elements from a single computer that I am looking for [mutableDictionary setObject:mutableString forKey:elementName]; } } Everything initialized and released correctly. Again, I'm not getting errors or leaking. Just inefficient. Thanks for any thoughts!

  Read the article

• rails paperclip unable to access image from another view

  - by curiousCoder

  my app has an habtm relation b/w listings and categories. now from the categories index page, a user filters select box to view listings in the show page. now i am not able to access images attached to listings in the category show page. listing.rb attr_accessible :placeholder, :categories_ids has_and_belongs_to_many :categories has_attached_file :placeholder, :styles => { :medium => "300x300>", :thumb => "100x100>" }, :default_url => "/images/:style/missing.png", :url => "/system/:hash.:extension", :hash_secret => "longSecretString" categories controller def index @categories = Category.all end def show @categories = Category.find_by_sql ["select distinct l.* from listings l , categories c, categories_listings cl where c.id = cl.category_id and l.id = cl.listing_id and c.id in (?,?)" , params[:c][:id1] , params[:c][:id2]] end the sql just filters and displays the listings in show page where i can show its attributes, but cant access the placeholder. note the plural @categories in show categories show page <ul> <% @categories.each_with_index do |c, index| %> <% if index == 0 %> <li class="first"><%= c.place %></li> <%= image_tag c.placeholder.url(:thumb) %> <li><%= c.price %></li> <% else %> <li><%= c.place %></li> <li><%= c.price %></li> <%= image_tag c.placeholder.url(:thumb) %> <% end %> <% end %> </ul> Access image from different view in a view with paperclip gem ruby on rails this said to make the object plural and call a loop, wch shall allow to access the image. it does not work in this case. undefined method `placeholder' for #<Category:0x5c78640> but the amazing thing is, placeholder will be displayed as an array of all images for all the listings if used as suggested in that stackoverflow, wch is, obviously, not the way i prefer. where's the issue? what am i missing?

  Read the article

• CreateProcessAsUser error 1314

  - by kampi

  Hi! I want create a process under another user. So I use LogonUser and CreateProcessAsUser. But my problem is, that CreatePtocessAsUser always returns the errorcode 1314, which means "A required privilige is not held by the client". So my question is, what I am doing wrong? Or how can i give the priviliges to the handle? (I think the handle should have the privileges, or I am wrong?) Sorry for my english mistakes, but my english knowledge isn't the best :) Plesase help if anyone knows how to correct my application. This a part of my code. STARTUPINFO StartInfo; PROCESS_INFORMATION ProcInfo; TOKEN_PRIVILEGES tp; memset(&ProcInfo, 0, sizeof(ProcInfo)); memset(&StartInfo, 0 , sizeof(StartInfo)); StartInfo.cb = sizeof(StartInfo); HANDLE handle = NULL; if (!OpenProcessToken(GetCurrentProcess(), TOKEN_ALL_ACCESS, &handle)) printf("\nOpenProcessError"); if (!LookupPrivilegeValue(NULL,SE_TCB_NAME, //SE_TCB_NAME, &tp.Privileges[0].Luid)) { printf("\nLookupPriv error"); } tp.PrivilegeCount = 1; tp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;//SE_PRIVILEGE_ENABLED; if (!AdjustTokenPrivileges(handle, FALSE, &tp, 0, NULL, 0)) { printf("\nAdjustToken error"); } i = LogonUser(user, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, &handle); printf("\nLogonUser return : %d",i); i = GetLastError(); printf("\nLogonUser getlast : %d",i); if (! ImpersonateLoggedOnUser(handle) ) printf("\nImpLoggedOnUser!"); i = CreateProcessAsUser(handle, "c:\\windows\\system32\\notepad.exe",NULL, NULL, NULL, true, CREATE_UNICODE_ENVIRONMENT |NORMAL_PRIORITY_CLASS | CREATE_NEW_CONSOLE, NULL, NULL, &StartInfo, &ProcInfo); printf("\nCreateProcessAsUser return : %d",i); i = GetLastError(); printf("\nCreateProcessAsUser getlast : %d",i); CloseHandle(handle); CloseHandle(ProcInfo.hProcess); CloseHandle(ProcInfo.hThread); Thanks in advance!

  Read the article

• .NET XML Serialization without <?xml> root node

  - by Graphain

  Hi, I'm trying to generate XML like this: <?xml version="1.0"?> <!DOCTYPE APIRequest SYSTEM "https://url"> <APIRequest> <Head> <Key>123</Key> </Head> <ObjectClass> <Field>Value</Field </ObjectClass> </APIRequest> I have a class (ObjectClass) decorated with XMLSerialization attributes like this: [XmlRoot("ObjectClass")] public class ObjectClass { [XmlElement("Field")] public string Field { get; set; } } And my really hacky intuitive thought to just get this working is to do this when I serialize: ObjectClass inst = new ObjectClass(); XmlSerializer serializer = new XmlSerializer(inst.GetType(), ""); StringWriter w = new StringWriter(); w.WriteLine(@"<?xml version=""1.0""?>"); w.WriteLine("<!DOCTYPE APIRequest SYSTEM"); w.WriteLine(@"""https://url"">"); w.WriteLine("<APIRequest>"); w.WriteLine("<Head>"); w.WriteLine(@"<Field>Value</Field>"); w.WriteLine(@"</Head>"); XmlSerializerNamespaces ns = new XmlSerializerNamespaces(); ns.Add("", ""); serializer.Serialize(w, inst, ns); w.WriteLine("</APIRequest>"); However, this generates XML like this: <?xml version="1.0"?> <!DOCTYPE APIRequest SYSTEM "https://url"> <APIRequest> <Head> <Key>123</Key> </Head> <?xml version="1.0" encoding="utf-16"?> <ObjectClass> <Field>Value</Field> </ObjectClass> </APIRequest> i.e. the serialize statement is automatically adding a <?xml root element. I know I'm attacking this wrong so can someone point me in the right direction? As a note, I don't think it will make practical sense to just make an APIRequest class with an ObjectClass in it (because there are say 20 different types of ObjectClass that each needs this boilerplate around them) but correct me if I'm wrong.

  Read the article

• doofus ASP.Net master page scrollbar question

  - by Stephen Falken

  Like happens to all of us sometimes, I inherited some crappy code I have to fix. We need to center our pages on widescreen machines, so we have a master page layout div like so: .MasterLayout { width:1100px; height: 100%; position:absolute; left:50%; margin-left:-550px; vertical-align:top; } I removed most of the detailed attributes for readability here, but here's how the table for the master page is laid out: <table border="0" cellpadding="0" cellspacing="0" style="width: 100%;"> <tr> <td style="width: 100%" align="center" colspan="2"> </td> </tr> <tr> <td colspan="2" style="height: 20px; background-color: #333;"> <asp:SiteMapPath/> </td> </tr> <tr> <td style="width: 86px; height: 650px; background-color: #B5C7DE; margin: 6px;" valign="top"> <asp:Menu /> <asp:SiteMapDataSource /> </td> <td style="background-color:#ffffff; margin:5px; width:1000px;" valign="top"> <asp:contentplaceholder id="ContentPlaceHolder1" runat="server"/> </td> </tr> </table> When resizing the browser window, the horizontal scrollbar only reaches as far as the left edge of the <asp:contentplaceholder/> control, and the <asp:menu/> that's in the 86px wide <td> is hidden. How can I fix this problem? THANKS IN ADVANCE

  Read the article

• UIScrollView works as expected but scrollRectToVisible: does nothing

  - by mahboudz

  HI. I have used UIScrollView before, and am using it now, and never had a problem. I'm now adding it to an old app, and while it works as expected (I can look at the contents, scroll around with my finger, all the bounds and sizes are setup right so there is no empty space in the content, etc.), I just can't get scrollToRectVisible to work. I have even simplified the call so that it merely moves to the 0,0 position: [scrollView scrollRectToVisible:CGRectMake(0, 0, 10, 10) animated:YES]; or move it to 0,200: [scrollView scrollRectToVisible:CGRectMake(0, 200, 10, 10) animated:YES]; I even made a quick app to test this and I can get scrollRectToVisible to work there as I expect. But in my old app, I can't seem to make it do anything. I can make the scrollView scroll with setContentOffset:, but that's not what I want. This scrollView and its contents are defined in the nib by IB and used with an IBOutlet. The only code I am using in my app to handle the scrollView is [scrollView setContentSize:CGSizeMake(scrollView.contentSize.width, imageView.frame.size.height)]; (I'm only interested in vertical scrolling not horizontal). Has anyone run into a problem like this? I have compared the scrollView attributes in both apps and they are identical. ADDENDUM: My scrollViews frame is: 0.000000 0.000000 480.000000 179.000000 My scrollViews contentSize is: 0.000000 324.000000 It still acts like the rect I want to scroll to is already visible and no scrolling is needed. Not sure if that is what is happening. This is just the darnest thing. Seems like such an easy thing to resolve... ADDENDUM #2: This is how I am making do without scrollRectToVisible: CGPoint point = myRect.origin; if (![clefScrollView pointInside:point withEvent:nil]) { point.x = 0; if (point.y > clefScrollView.contentSize.height - clefScrollView.bounds.size.height) point.y = clefScrollView.contentSize.height - clefScrollView.bounds.size.height; [clefScrollView setContentOffset:point animated: YES]; } Everything else about this scrollView works as expected, but scrollRectToVisible. WHY?!? Any wild guesses?

  Read the article

• Custom validator not invoked when using Validation Application Block through configuration

  - by Chris

  I have set up a ruleset in my configuration file which has two validators, one of which is a built-in NotNullValidator, the other of which is a custom validator. The problem is that I see the NotNullValidator hit, but not my custom validator. The custom validator is being used to validate an Entity Framework entity object. I have used the debugger to confirm the NotNull is hit (I forced a failure condition so I saw it set an invalid result), but it never steps into the custom one. I am using MVC as the web app, so I defined the ruleset in a config file at that layer, but my custom validator is defined in another project. However, I wouldn't have thought that to be a problem because when I use the Enterprise Library Configuration tool inside Visual Studio 2008 it is able to set the type properly for the custom validator. As well, I believe the custom validator is fine as it builds ok, and the config tool can reference it properly. Does anybody have any ideas what the problem could be, or even what to do/try to debug further? Here is a stripped down version of my custom validator: [ConfigurationElementType(typeof(CustomValidatorData))] public sealed class UserAccountValidator : Validator { public UserAccountValidator(NameValueCollection attributes) : base(string.Empty, "User Account") { } protected override string DefaultMessageTemplate { get { throw new NotImplementedException(); } } protected override void DoValidate(object objectToValidate, object currentTarget, string key, ValidationResults results) { if (!currentTarget.GetType().Equals(typeof(UserAccount))) { throw new Exception(); } UserAccount userAccountToValidate = (UserAccount)currentTarget; // snipped code ... this.LogValidationResult(results, "The User Account is invalid", currentTarget, key); } } Here is the XML of my ruleset in Validation.config (the NotNull rule is only there to force a failure so I could see it getting hit, and it does): <validation> <type defaultRuleset="default" assemblyName="MyProj.Entities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="MyProj.Entities.UserAccount"> <ruleset name="default"> <properties> <property name="HashedPassword"> <validator negated="true" messageTemplate="" messageTemplateResourceName="" messageTemplateResourceType="" tag="" type="Microsoft.Practices.EnterpriseLibrary.Validation.Validators.NotNullValidator, Microsoft.Practices.EnterpriseLibrary.Validation, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Not Null Validator" /> </property> <property name="Property"> <validator messageTemplate="" messageTemplateResourceName="" messageTemplateResourceType="" tag="" type="MyProj.Entities.UserAccountValidator, MyProj.Entities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Custom Validator" /> </property> </properties> </ruleset> </type> </validation> And here is the stripped down version of the way I invoke the validation: var type = entity.GetType() var validator = ValidationFactory.CreateValidator(type, "default", new FileConfigurationSource("Validation.config")) var results = validator.Validate(entity) Any advice would be much appreciated! Thanks, Chris

  Read the article

• understanding semcor corpus structure h

  - by Sharmila

  I'm learning NLP. I currently playing with Word Sense Disambiguation. I'm planning to use the semcor corpus as training data but I have trouble understanding the xml structure. I tried googling but did not get any resource describing the content structure of semcor. <s snum="1"> <wf cmd="ignore" pos="DT">The</wf> <wf cmd="done" lemma="group" lexsn="1:03:00::" pn="group" pos="NNP" rdf="group" wnsn="1">Fulton_County_Grand_Jury</wf> <wf cmd="done" lemma="say" lexsn="2:32:00::" pos="VB" wnsn="1">said</wf> <wf cmd="done" lemma="friday" lexsn="1:28:00::" pos="NN" wnsn="1">Friday</wf> <wf cmd="ignore" pos="DT">an</wf> <wf cmd="done" lemma="investigation" lexsn="1:09:00::" pos="NN" wnsn="1">investigation</wf> <wf cmd="ignore" pos="IN">of</wf> <wf cmd="done" lemma="atlanta" lexsn="1:15:00::" pos="NN" wnsn="1">Atlanta</wf> <wf cmd="ignore" pos="POS">'s</wf> <wf cmd="done" lemma="recent" lexsn="5:00:00:past:00" pos="JJ" wnsn="2">recent</wf> <wf cmd="done" lemma="primary_election" lexsn="1:04:00::" pos="NN" wnsn="1">primary_election</wf> <wf cmd="done" lemma="produce" lexsn="2:39:01::" pos="VB" wnsn="4">produced</wf> <punc>``</punc> <wf cmd="ignore" pos="DT">no</wf> <wf cmd="done" lemma="evidence" lexsn="1:09:00::" pos="NN" wnsn="1">evidence</wf> <punc>''</punc> <wf cmd="ignore" pos="IN">that</wf> <wf cmd="ignore" pos="DT">any</wf> <wf cmd="done" lemma="irregularity" lexsn="1:04:00::" pos="NN" wnsn="1">irregularities</wf> <wf cmd="done" lemma="take_place" lexsn="2:30:00::" pos="VB" wnsn="1">took_place</wf> <punc>.</punc> </s> I'm assuming wnsn is 'word sense'. Is it correct? What does the attribute lexsn mean? How does it map to wordnet? What does the attribute pn refer to? (third line) How is the rdf attribute assigned? (again third line) In general, what are the possible attributes?

  Read the article

• ASP.Net master page scrollbar question

  - by Stephen Falken

  Like happens to all of us sometimes, I inherited some crappy code I have to fix. We need to center our pages on widescreen machines, so we have a master page layout div like so: .MasterLayout { width:1100px; height: 100%; position:absolute; left:50%; margin-left:-550px; vertical-align:top; } I removed most of the detailed attributes for readability here, but here's how the table for the master page is laid out: <table border="0" cellpadding="0" cellspacing="0" style="width: 100%;"> <tr> <td style="width: 100%" align="center" colspan="2"> </td> </tr> <tr> <td colspan="2" style="height: 20px; background-color: #333;"> <asp:SiteMapPath/> </td> </tr> <tr> <td style="width: 86px; height: 650px; background-color: #B5C7DE; margin: 6px;" valign="top"> <asp:Menu /> <asp:SiteMapDataSource /> </td> <td style="background-color:#ffffff; margin:5px; width:1000px;" valign="top"> <asp:contentplaceholder id="ContentPlaceHolder1" runat="server"/> </td> </tr> </table> When resizing the browser window, the horizontal scrollbar only reaches as far as the left edge of the <asp:contentplaceholder/> control, and the <asp:menu/> that's in the 86px wide <td> is hidden. How can I fix this problem? THANKS IN ADVANCE

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >