Search Results

Search found 7114 results on 285 pages for 'auto'.

Page 147/285 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

  • OS X 10.6 Snow Leopard no longer mounting an external USB drive

    - by Brant Bobby
    I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on /Volumes/Test: Incorrect super block. ... but if I use the mount_hfs command it works fine, mounts, and is readable. $ mount_hfs /dev/disk1s2 /Volumes/Test/ fsck gives me an error about a bad super block: $ fsck /dev/disk1 ** /dev/rdisk1 (NO WRITE) BAD SUPER BLOCK: MAGIC NUMBER WRONG ... but fsck_hfs -fn /dev/disk1s2 doesn't find any problems and reports that the volume appears to be OK. In Disk Utility, the drive appears to have a single MS-DOS partition with a curious notice about how it appears to be partitioned for Boot Camp: I have the Boot Camp HFS driver installed in WIndows 7, and that OS sees the drive/partition normally. What's wrong with my disk?

    Read the article

  • Should EC2 server self register or have admin server

    - by hortitude
    I'm creating AWS servers using chef. I am also planning on enabling auto-scaling. While we have automatic monitoring setup already (server density or nagios etc), I was also going to setup the cloud watch alarm for the status check on the server. This led me down the path of trying to decide whether to install the ec2-command-line tools on the server itself (which then requires me to install java on the servers -- despite no other need for Java in our environment) or to possible have an "admin" box that will check periodically for servers and make sure they have their alarms set. I expect this paradigm to carry over to other things we want to configure (perhaps ensuring that termination protection is setup on production servers?). Any thoughts as to why to go one direction or another?

    Read the article

  • Is it possible to mount a hot-swappable drive when it is turned on?

    - by John
    In my PC, I have a hot-swap drive. Usually I keep it off to save power. I only really use it when accessing from another PC on the network. Is it possible to configure /etc/fstab to mount this drive when I turn it on (without having to shake the mouse, open file manager and click the drive to have it mounted? Currently, I have: UUID=a869e5ca-7d3b-4d64-91e2-eadbecd8c9e5 /media/i-TVShows ext4 rw,nosuid,nodev,auto,user,uhelper=udisks 0 0 in my /etc/fstab file but it doesn't seem to do the trick. I want the drive to be user-mountable, on power on, with RW access, and I'm thinking of adding 'nofail'...this is my first time writing to the fstab file, and a lot of the parameters I took from the output of 'mount' so feel free to correct any oddness you find. Thanks

    Read the article

  • Automatically keeping two excel data tables in-sync (w/out VBA)

    - by Neil
    I'm putting together a workbook for tracking a stock portfolio. The primary sheet contains a table with the list of the transactions. From this I would like to create an overview table on another sheet with only one row per unique stock symbol that includes things like cost basis, returns, etc. The problem is that nothing I've tried updates the overview table correctly when rows are added to the transaction table. The closest I've got is something like the following: http://www.get-digital-help.com/2009/04/14/create-a-unique-alphabetically-sorted-list-extracted-from-a-column/ However, this requires applying that formula to every cell in the primary column of the overview sheet. And even then the range of the table isn't extended down to include new rows as they become valid. Essentially I'm looking for a way that auto-adds rows to a table and copies the formula based on a different table changing without using VBA. Trivial example data Sheet1 Symbol Type Shares Price F Buy 100 12 MSFT Buy 100 25 MSFT Sell 50 28 F Buy 100 16 Sheet2 Symbol Quantity F 200 MSFT 50

    Read the article

  • Android: Get the X and Y coordinates of a TextView?

    - by Jep Knopz
    I am working now on a project. I have 2 draggable textView in a circle. I want to add those value inside the circle when the circle is drag over the other circle. the first option that I have is to get the X and Y of the circle, but I get it. Can anyone fix my code? Here is the Code: MainActivity public class MainActivity extends Activity { int windowwidth; int windowheight; TextView bola; TextView bola2; private float x; private float y; private android.widget.RelativeLayout.LayoutParams layoutParams; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); windowwidth = getWindowManager().getDefaultDisplay().getWidth(); windowheight = getWindowManager().getDefaultDisplay().getHeight(); bola = (TextView) findViewById(R.id.ball); bola2 = (TextView) findViewById(R.id.ball2); bola2.setOnTouchListener(new View.OnTouchListener() { @Override public boolean onTouch(View v, MotionEvent event) { // TODO Auto-generated method stub layoutParams = (RelativeLayout.LayoutParams) bola2 .getLayoutParams(); switch (event.getActionMasked()) { case MotionEvent.ACTION_DOWN: break; case MotionEvent.ACTION_MOVE: int x_cord = (int) event.getRawX(); int y_cord = (int) event.getRawY(); if (x_cord > windowwidth) { x_cord = windowwidth; } if (y_cord > windowheight) { y_cord = windowheight; } layoutParams.leftMargin = x_cord - 25; layoutParams.topMargin = y_cord - 75; bola2.setLayoutParams(layoutParams); break; default: break; } return true; } }); bola.setOnTouchListener(new View.OnTouchListener() { @Override public boolean onTouch(View v, MotionEvent event) { layoutParams = (RelativeLayout.LayoutParams) bola .getLayoutParams(); switch (event.getActionMasked()) { case MotionEvent.ACTION_DOWN: break; case MotionEvent.ACTION_MOVE: int x_cord = (int) event.getRawX(); int y_cord = (int) event.getRawY(); if (x_cord > windowwidth) { x_cord = windowwidth; } if (y_cord > windowheight) { y_cord = windowheight; } layoutParams.leftMargin = x_cord - 25; layoutParams.topMargin = y_cord - 75; bola.setLayoutParams(layoutParams); break; default: break; } // TODO Auto-generated method stub return true; } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_main, menu); return true; }} Activity_main.xml <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" > <TextView android:id= "@+id/ball" android:background="@drawable/bgshape" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="1" tools:context=".MainActivity" /> <TextView android:id= "@+id/ball2" android:background="@drawable/bgshape" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="2" tools:context=".MainActivity" android:layout_x="60dp" android:layout_y="20dp" /> The bgshape.xml(for the circle) <?xml version="1.0" encoding="utf-8"?> <shape xmlns:android="http://schemas.android.com/apk/res/android" > <padding android:bottom="20dp" android:left="25dp" android:right="25dp" android:top="20dp" /> <stroke android:width="2dp" android:color="#000000" /> <solid android:color="#ffffff" /> <corners android:bottomLeftRadius="30dp" android:bottomRightRadius="30dp" android:topLeftRadius="30dp" android:topRightRadius="30dp" /> This code works well. Could anyone fix this so that I can add the value inside the circle when they hit each other?

    Read the article

  • DataTrigger inside ControlTemplate doesn't update

    - by kennethkryger
    I have a ListBox that is bound to a list of CustomerViewModel-objects, that each has two dependency properties: - Name (string) - Description (string) - IsVisible (bool) (the IsVisible property is True by default and is reversed via the ToggleVisibility Command on the CustomerViewModel) I would like to display the Name and Description to the right of a Border-control, that is has a Transparent background when the IsVisible property is True and Green when the False. My problem is that the DataTrigger part of the code below doesn't work the way I want, because the Setter-part isn't triggered when the IsVisible is changed. What am I doing wrong? Here's my code: <UserControl.Resources> <Style x:Key="ListBoxStyle" TargetType="{x:Type ListBox}"> <Setter Property="Margin" Value="-1,-1,0,0" /> <Setter Property="BorderThickness" Value="0" /> <Setter Property="Background" Value="Transparent" /> <Setter Property="ItemContainerStyle" Value="{DynamicResource ListboxItemStyle}" /> <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Disabled" /> </Style> <Style x:Key="ListboxItemStyle" TargetType="{x:Type ListBoxItem}"> <Setter Property="Background" Value="Transparent" /> <Setter Property="FocusVisualStyle" Value="{x:Null}" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type ListBoxItem}"> <Grid> <Border x:Name="border" Background="{TemplateBinding Background}" BorderBrush="#FFD4D6D5" BorderThickness="0,0,0,1"> <Grid Height="70" Margin="0,0,10,0"> <Grid.RowDefinitions> <RowDefinition Height="10" /> <RowDefinition Height="Auto" /> <RowDefinition /> <RowDefinition Height="10" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition /> </Grid.ColumnDefinitions> <Border x:Name="visibilityColumn" Grid.Row="0" Grid.Column="0" Grid.RowSpan="4" Background="Transparent" Width="4" Margin="0,0,4,0" /> <TextBlock x:Name="customerName" Grid.Row="1" Grid.Column="1" Foreground="#FF191919" FontWeight="Bold" Text="{Binding Name}" VerticalAlignment="Top" /> <TextBlock Grid.Row="2" Grid.Column="1" VerticalAlignment="Stretch" Text="{Binding Description}" TextWrapping="Wrap" Foreground="#FFB4B4B4" TextTrimming="CharacterEllipsis" /> </Grid> <Border.ContextMenu> <ContextMenu> <MenuItem Header="Edit..." /> <MenuItem Header="Visible" IsCheckable="True" IsChecked="{Binding IsVisible}" Command="{Binding ToggleVisibility}"/> </ContextMenu> </Border.ContextMenu> </Border> </Grid> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="True"> <Setter Property="Background" Value="#FFEEEEEE" /> </Trigger> <Trigger Property="IsSelected" Value="True"> <Setter Property="Background" Value="#FFF5F5F5" /> <Setter TargetName="customerName" Property="Foreground" Value="Green" /> </Trigger> <DataTrigger Binding="{Binding IsVisible}" Value="False"> <!--If Value="True" the customerName Border shows up green!--> <Setter Property="Background" Value="Green" /> </DataTrigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <ListBox Style="{StaticResource ListBoxStyle}" ItemsSource="{Binding CustomerViewModels}" />

    Read the article

  • IPSec tunnel between FortiGate and iPhone / iOS - Works except for DNS / Wins

    - by user57988
    I have configured my Fortigate with a new VPN IPSec tunnel to allow the iOS Cisco client to connect. That works fine. I can RDP to my servers, browse to my servers via IP address, etc. But, the iPhone does not resolve my internal IP addresses. I have added the DNS servers that serve addresses for my internal users, as well as the WINS servers, but the iPhone acts like it doesn't see them at all. config vpn ipsec phase1-interface edit "iPhone_VPN" set type dynamic set interface "wan1" set dhgrp 2 set proposal 3des-sha1 3des-md5 set xauthtype auto set mode-cfg enable set authusrgrp "iPhone_VPN_Users" set ipv4-start-ip 10.10.99.100 set ipv4-end-ip 10.10.99.199 set ipv4-netmask 255.255.0.0 set ipv4-dns-server1 10.10.2.1 set ipv4-dns-server2 10.22.1.80 set ipv4-wins-server1 10.10.2.1 set ipv4-wins-server2 10.22.1.80 set ipv4-split-include "Dialup_VPN_Networks" set psksecret ENC xxxxx next end For whatever reason, as far as I can tell, the iPhone does not 'see' the DNS or WINS entries. I don't know how to check it...

    Read the article

  • SCCM 2012 R2 - OSD Task Sequence failure on physical computers

    - by Svanste
    I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

    Read the article

  • SCCM 2012 R2 - OSD Task Sequence failure on physical computers

    - by user1422136
    I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

    Read the article

  • HTTPS is not working in transparent proxy with Squid

    - by Supratik
    Hi I am using Squid proxy 3.1, all systems in the LAN connects to the internet through proxy. Direct connection is blocked using the iptables from the gateway server. There are some devices which does not have options for auto proxy or manual proxy and can only connect to the internet directly. So I enabled transparent proxy in Squid and redirected packets for port 80 and 443 to Squid proxy using iptables. Now the problem is it is working fine for HTTP port but HTTPS is not working. It is throwing "ssl_error_rx_record_too_long" error. If it is not possible through transparent proxy can you please suggest me another solution. Warm Regards Supratik

    Read the article

  • How do I use WAV files as a voicemail greeting in Exchange UM?

    - by Doug Luxem
    We are in the process of ditching Cisco Unity for Exchange 2007 Unified Messaging; however, I just came to realization that Exchange doesn't seem to provide a way to upload a WAV file to be used as a voicemail greeting. This could be a problem, since we have several mailboxes that use professionally recorded greetings. I found this article which shows how to access the data through MAPI, but it does not provide a way to upload new files. Note, this is not for the auto attendants, but for actual voicemail greetings.

    Read the article

  • Firewall software that can block access to certain applications on certain internet connections

    - by webmasters
    I have two internet connections, a LAN and a 3G modem on a Windows 7 machine. The LAN is connected to a Edimax router which is conneted to the ISP (with their own modem). Now, the Edimax router is set to auto assign IP adresses in the range: 168.192.2.100 and 192.168.2.200 I wanted to block internet explorer to access the LAN. I entered my AVG firewall, selected iexplorer and added a "block" rule which blocked all ports, TCP and UDP protocols for the above IP range. The problem is it did not work, not matter what rules I have tried. Can you recommend a firewall that can easily accomplish this? Ty

    Read the article

  • Win 7 BSOD stucks at dumping

    - by AFO
    Recently Ive been getting frequent bsods, which always gets stuck at dumping without finishing it, with most of them showing no error messages. This never happened before i upgraded to new rams, but 2 passes of memtest86 turned out fine. Tried reinstalling windows, problem still there. Tried initiating a manual crash, and that did create a successful dump. The SSD win 7 is on doesn't seem to have any problems, crystaldisk says its healthy. Varied the cpu multiplier between stock and +500Mhz, crashed regardless. Left voltage control to auto. Im fairly sure its a hardware problem, just cant pinpoint which specific part(s). The specs- Windows 7 x64 (1 day old) 955 x4 BE c3 (running at stock) (3.5 years old) GA-970A-D3 (1.5 years old) Gigabyte 6950, unlocked to 6970 (still at 6950 speeds) (<3 years old) 2x4GB 1600 CL9 HyperX Blu (running at 11-11-11, default motherboard setting) (<1 month old) Plextor M5s (around 5 months)

    Read the article

  • Getting chrome to distinguish between search engine query or URL entry?

    - by RoboShop
    So I use the quick search engine thing on chrome a lot. I type "w superman" if I want to find the wikipedia article for superman and even "tfs 13323" if I want to find the work item in TFS. The only problem is that with Google's new auto complete thing, sometimes I'll type in tfs 13030 and I'll get taken to the google search page having searched for "tfs 13030". The only way I can get rid of this is to clear my browser history. I guess the problem with using search and url on both the same bar is it gets confused about whether ur searching or ur entering a url. Is there a way around this?

    Read the article

  • Pyramind of DIVs

    - by sebastian
    Hi there, I'm trying to build a pyramid that's made of 4 DIVs. The layout looks like this: ------ | #1 | ------ ---------------- | #2 | #3 | #4 | ---------------- Moreover I need 3 additional DIVs starting at the center DIV (#3) and containing either #1, #2 or #3 additionally. These DIVs are used the build a sliding effect with jQueryUI later on. It's supposed to look like #1, #2 and #4 slide out of #3. The margin between the DIVs is supposed to be 2 pixels. I also want the whole block to be centered. Even with display: inline; and position: absolute; enabled on the visible and invisible DIVs I can't get the layout right. I used some negative margins and when it looked ok for the first time I saw that my top DIV was positioned outside of the html body. I suppose there is a more simple and elegant way to achieve what I want. Thanks in advance Sebastian Here's what I've got so far: HTML: <div id="centerbox"> <div id="main">main</div> <div id="rail_top"> <div id="top">top</div> </div> <div id="rail_left"> <div id="left">left</div> </div> <div id="rail_right"> <div id="right">right</div> </div> </div> CSS: #centerbox { height: 602px; width: 904px; margin-top: 640px; margin-left: auto; margin-right: auto; } /* blue */ #main { background-color: #33F; height: 300px; width: 300px; margin: 2px; z-index: 9999; position: absolute; display: inline; margin-left: 302px; } /* green */ #top { background-color: #3F0; height: 300px; width: 300px; z-index: 1; position: absolute; display: inline; } /* pink */ #left { background-color: #F06; height: 300px; width: 300px; z-index: 1; } /* orange */ #right { background-color: #FC0; height: 300px; width: 300px; z-index: 1; margin-left: 302px; } #rail_top { height: 602px; width: 300px; display: inline; position: absolute; margin-top: -300px; margin-left: 302px; } #rail_left { height: 300px; width: 602px; float: left; position: absolute; display: inline; margin-top: 2px; } #rail_right { height: 300px; width: 602px; float: right; position: absolute; display: inline; margin-left: 302px; margin-top: 2px; }

    Read the article

  • NFS-Root not working when booting over PXE

    - by Randy
    I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

    Read the article

  • AWS Autoscaling issue with existing nodes in ELB

    - by Ram Prasad
    I already have a ELB setup called MyLoadBalancer. I already have 2 nodes running on it with health checks (that checks a URL on the node to see if they are up) Created an autoscaling group (min 2, Max 10) Associated launchconfig mylaunchconfig that provisions a node using an AMI Created a trigger, that checks for avg min connections of 100 and Max of 500 (checks the load balancer and it is support to increase the node count by 1, if avg connections are 500 and decrease by one if less than 100) as-create-or-update-trigger MyTrigger --auto-scaling-group MyAutoScalingGroup --namespace "AWS/ELB" --measure RequestCount --statistic Average --dimensions "LoadBalancerName=MyLoadBalancer" --period 60 --lower-threshold 500 --upper-threshold 800 --lower-breach-increment=-1 --upper-breach-increment=1 --breach-duration 600 Now the issue is, as soon as I put in the trigger, it start 2 nodes .... but there are already two nodes in the LB. So, why is it provisioning 2 more nodes, when the nodes are there ? is it because it is not recognizing the existing 2 nodes ? then how do I add the existing nodes to the AutoScaling group ?

    Read the article

  • Spamassassin: How to delete all spam messages on the server?

    - by Beck
    Can't find out, how to configure spamassassin to delete all spam messages. Currenly it's only mark messages as spam, but pass them throught IMAP to client. How to block them from passing through to IMAP clients? http://spamassassin.apache.org/full/3.3.x/doc/Mail_SpamAssassin_Conf.html And it's blocking some of our notification messages... -1.4 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message 2.4 HTML_IMAGE_ONLY_08 BODY: HTML: images with 400-800 bytes of words 2.9 TVD_SPACE_RATIO BODY: TVD_SPACE_RATIO 1.7 MIME_HTML_ONLY BODY: Message only has text/html MIME parts 1.1 HTML_MIME_NO_HTML_TAG HTML-only message, but there is no HTML tag 1.1 HTML_SHORT_LINK_IMG_1 HTML is very short with a linked image -1.4 AWL AWL: From: address is in the auto white-list This is what clients getting on their mails in place of our notification messages. Any idea how to pass those messages through and how to delete incoming spam? Thanks ;) I have this setup: postfix spamassassin clamav-daemon amavis

    Read the article

  • Best Solution for Load Balancing geographically distributed NFS File Access?

    - by DairyKnight
    I'm trying to find an optimum solution for accessing the NFS file share in my company. We have a central file server in North America and has 30GB~50GB of updated data everyday. And it's very slow for our Europe and Asia branches to access directly. Therefore, I'm trying to setup two replicate servers in those continents. I'm currently using rsync, but wonder if there exists a better solution acts more like a distributed RAID, which allows the user to transparently access the file whether synced or not. And user request will be dispatched to remote server if the file is not yet synced. I'm now looking into DRBD, but it seems not to have the functionality of auto-dispatching requests. Does anyone know if there's a better solution?

    Read the article

  • How to automount SMB shared network drives in Mac OS X Lion

    - by cyppher
    In Mac OS X 10.7 (Lion) Apple has replaced good old SMB support. Now I can't auto connect to my shared (SMB) network drives. Workarounds? Or Impossible? In OS X Snow Leopard, I could automatically connect my Ubuntu (SMB) shared network drives with auto_smb / auto_master (autofs configuration in /private/etc/). I made three mount points (folders) directly in '/Volumes', I used /Volumes/Data and /Volumes/webroot (both SMB shared). Unfortunately Lion doesn't connect (automount) my network drives. I have to manually connect to the server (Ubuntu file server) in Finder, then open up Terminal to navigate to the mount points, and then it connects. This is not a workable solution. I've searched (Google/SO) but found no solutions apart from an unsupported hack. Isn't it possible any more to automatically connect to an SMB-shared drive during startup?

    Read the article

  • How do I get grep color in the file names before each match?

    - by chimerical
    If I run grep -ir "somethingtomatch" . from the current directory, I typically get results like this: ./some/path/file1.html: filecontent filecontent keyword filecontent ./some/path/file2.html: filecontent filecontent filecontent keyword ./some/path/file3.html: filecontent keyword filecontent filecontent ./some/path/file4.html: keyword filecontent filecontent filecontent I used grep --color=auto -ir 'somethingtomatch" . but it only highlights the keywords in white on a red highlight. I'm trying to get file names on the left color-coded too. How do I do that? I'm using Terminal.app in OS X with bash and xterm (and I tried xterm-color too).

    Read the article

  • Kerio group calendaring private/public functionality

    - by bsigrist
    We are considering a change of email servers and Kerio Connect is attractive. However, I am concerned about calendaring functionality. I found an old forum post that states the question well: "We want to create a single public calendar that everyone can see - using Windows XP/Outlook 2003/KOC 6.4.1. We want a way for people to put an entry in their own personal calendar and some how mark it so the entry auto add's or syncs with the public one. If an entry is private it wouldn't sync to the shared public calendar... Has anyone ever heard of a way to do this - in any way with any software?" This is a high priority feature, so if Kerio cannot do this, we may consider Exchange. Does Exchange provide functionality like that described?

    Read the article

  • How do you confirm network adapter is gigabit capable?

    - by StrandedPirate
    Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

    Read the article

  • Unable to Get IIS Response Times with Hyperic Monitoring Tool

    - by jwmajors81
    We have a very large .NET application (vendor) that I am trying to gather performance metrics for using Hyperic. In general I wanted to be able to report response times for each of the components within the application, which include: Web Services ASP.NET Pages MSMQ I am currently unable to successfully monitor the response times for IIS on my windows machines. I have successfully auto-discovered them and I am getting diagnostic information, but am not getting back the response times. After looking online at what other people are seeing, I found that I am missing a tab for the response times which is usually next to the metrics tab. Also, when I look at the configuration screen for IIS I do not see a field which enables me to specify where the log files are located at. Please note that my logs are located at e:\LogFiles\ instead of the usual location because our IT staff doesn't allocate much space for the C: drive. Please note that I have the MSMQ monitors up and running great. Any assistance would be greatly appreciated. Thanks, Jeremy

    Read the article

  • wpf exit thread automatically when application closes

    - by toni
    Hi, I have a main wpf window and one of its controls is a user control that I have created. this user control is an analog clock and contains a thread that update hour, minute and second hands. Initially it wasn't a thread, it was a timer event that updated the hour, minutes and seconds but I have changed it to a thread because the application do some hard work when the user press a start button and then the clock don't update so I changed it to a thread. COde snippet of wpf window: <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:GParts" xmlns:Microsoft_Windows_Themes="clr-namespace:Microsoft.Windows.Themes assembly=PresentationFramework.Aero" xmlns:UC="clr-namespace:GParts.UserControls" x:Class="GParts.WinMain" Title="GParts" WindowState="Maximized" Closing="Window_Closing" Icon="/Resources/Calendar-clock.png" x:Name="WMain" > <...> <!-- this is my user control --> <UC:AnalogClock Grid.Row="1" x:Name="AnalogClock" Background="Transparent" Margin="0" Height="Auto" Width="Auto"/> <...> </Window> My problem is when the user exits the application then the thread seems to continue executing. I would like the thread finishes automatically when main windows closes. code snippet of user control constructor: namespace GParts.UserControls { /// <summary> /// Lógica de interacción para AnalogClock.xaml /// </summary> public partial class AnalogClock : UserControl { System.Timers.Timer timer = new System.Timers.Timer(1000); public AnalogClock() { InitializeComponent(); MDCalendar mdCalendar = new MDCalendar(); DateTime date = DateTime.Now; TimeZone time = TimeZone.CurrentTimeZone; TimeSpan difference = time.GetUtcOffset(date); uint currentTime = mdCalendar.Time() + (uint)difference.TotalSeconds; christianityCalendar.Content = mdCalendar.Date("d/e/Z", currentTime, false); // this was before implementing thread //timer.Elapsed += new System.Timers.ElapsedEventHandler(timer_Elapsed); //timer.Enabled = true; // The Work to perform ThreadStart start = delegate() { // With this condition the thread exits when main window closes but // despite of this it seems like the thread continues executing after // exiting application because in task manager cpu is very busy // while ((this.IsInitialized) && (this.Dispatcher.HasShutdownFinished== false)) { this.Dispatcher.Invoke(DispatcherPriority.Normal, (Action)(() => { DateTime hora = DateTime.Now; secondHand.Angle = hora.Second * 6; minuteHand.Angle = hora.Minute * 6; hourHand.Angle = (hora.Hour * 30) + (hora.Minute * 0.5); DigitalClock.CurrentTime = hora; })); } Console.Write("Quit ok"); }; // Create the thread and kick it started! new Thread(start).Start(); } // this was before implementing thread void timer_Elapsed(object sender, System.Timers.ElapsedEventArgs e) { this.Dispatcher.Invoke(DispatcherPriority.Normal, (Action)(() => { DateTime hora = DateTime.Now; secondHand.Angle = hora.Second * 6; minuteHand.Angle = hora.Minute * 6; hourHand.Angle = (hora.Hour * 30) + (hora.Minute * 0.5); DigitalClock.CurrentTime = hora; })); } } // end class } // end namespace How can I exit correctly from thread automatically when main window closes and then application exits? Thanks very much!

    Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >