double click - Page 147

Vector Usage in MPI(C++)

- by lsk1985

I am new to MPI programming,stiil learning , i was successful till creating the Derived data-types by defining the structures . Now i want to include Vector in my structure and want to send the data across the Process. for ex: struct Structure{ //Constructor Structure(): X(nodes),mass(nodes),ac(nodes) { //code to calculate the mass and accelerations } //Destructor Structure() {} //Variables double radius; double volume; vector<double> mass; vector<double> area; //and some other variables //Methods to calculate some physical properties Now using MPI i want to sent the data in the structure across the processes. Is it possible for me to create the MPI_type_struct vectors included and send the data? I tried reading through forums, but i am not able to get the clear picture from the responses given there. Hope i would be able to get a clear idea or approach to send the data PS: i can send the data individually , but its an overhead of sending the data using may MPI_Send/Recieve if we consider the domain very large(say 10000*10000)

Read the article

I want to create a simple function to reset all input values without target input. (Javascript, Jque

- by question_about_the_problem

Hi, I want to create a simple function to reset all input values without target input. I don't know how i can do it. Thanks. Here is my sample codes: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script> function reset_other_inputs(room) { $("input[name^='check_in_date_']").each(function () { if ( $("input[name!='check_in_date_'+room]") ) { this.val(""); } }); $("input[name^='check_out_date_']").each(function () { if ( $("input[name!='check_out_date_'+room]") ) { this.val(""); } }); } </script> <input type="text" name="check_in_date_single" value="single" onClick="reset_other_inputs('single');"> <input type="text" name="check_out_date_single" value="single" onClick="reset_other_inputs('single');"> <input type="text" name="check_in_date_double" value="double" onClick="reset_other_inputs('double');"> <input type="text" name="check_out_date_double" value="double" onClick="reset_other_inputs('double');"> <input type="text" name="check_in_date_triple" value="triple" onClick="reset_other_inputs('triple');"> <input type="text" name="check_out_date_triple" value="triple" onClick="reset_other_inputs('triple');"> <input type="text" name="check_in_date_suite" value="suite" onClick="reset_other_inputs('suite');"> <input type="text" name="check_out_date_suite" value="suite" onClick="reset_other_inputs('suite');">

Read the article

What else I must do allow my method to handle any type of objects

- by NewHelpNeeder

So to allow any type object I must use generics in my code. I have rewrote this method to do so, but then when I create an object, for example Milk, it won't let me pass it to my method. Ether there's something wrong with my generic revision, or Milk object I created is not good. How should I pass my object correctly and add it to linked list? This is a method that causes error when I insert an item: public void insertFirst(T dd) // insert at front of list { Link newLink = new Link(dd); // make new link if( isEmpty() ) // if empty list, last = newLink; // newLink <-- last else first.previous = newLink; // newLink <-- old first newLink.next = first; // newLink --> old first first = newLink; // first --> newLink } This is my class I try to insert into linked list: class Milk { String brand; double size; double price; Milk(String a, double b, double c) { brand = a; size = b; price = c; } } This is test method to insert the data: public static void main(String[] args) { // make a new list DoublyLinkedList theList = new DoublyLinkedList(); // this causes: // The method insertFirst(Comparable) in the type DoublyLinkedList is not applicable for the arguments (Milk) theList.insertFirst(new Milk("brand", 1, 2)); // insert at front theList.displayForward(); // display list forward theList.displayBackward(); // display list backward } // end main() } // end class DoublyLinkedApp Declarations: class Link<T extends Comparable<T>> {} class DoublyLinkedList<T extends Comparable<T>> {}

Read the article

C++: Calculate probability percentage during each iteration

- by Mur Quirk

Can't seem to get this to work. The idea is to calculate the percentage of heads and tails after each count, accumulating after each iteration. Except I keep getting nan% for my calculations. Anybody see what I'm doing wrong? void flipCoin(time_t seconds, int flipCount){ vector<int> flips; float headCount = 0; float tailCount = 0; double headProbability = double((headCount/(headCount + tailCount))*100); double tailProbability = double((tailCount/(headCount + tailCount))*100); for (int i=0; i < flipCount; i++) { int flip = rand() % (HEADS - TAILS + 1) + TAILS; flips.push_back(flip); if (flips[i] == 1) { tailCount++; cout << "Tail Percent: " << tailProbability << "%" << endl; }else{ headCount++; cout << "Head Percent: " << headProbability << "%" << endl; } } }

Read the article

Efficient way to call .Sum() on multiple properties

- by SherCoder

I have a function that uses Linq to get data from the database and then I call that function in another function to sum all the individual properties using .Sum on each individual property. I was wondering if there is an efficient way to sum all the properties at once rather than calling .Sum() on each individual property. I think the way I am doing as of right now, is very slow (although untested). public OminitureStats GetAvgOmnitureData(int? fnsId, int dateRange) { IQueryable<OminitureStats> query = GetOmnitureDataAsQueryable(fnsId, dateRange); int pageViews = query.Sum(q => q.PageViews); int monthlyUniqueVisitors = query.Sum(q => q.MonthlyUniqueVisitors); int visits = query.Sum(q => q.Visits); double pagesPerVisit = (double)query.Sum(q => q.PagesPerVisit); double bounceRate = (double)query.Sum(q => q.BounceRate); return new OminitureStats(pageViews, monthlyUniqueVisitors, visits, bounceRate, pagesPerVisit); }

Read the article

Something missing

- by DHF

The error of "} expected" appears at line 5. Why is that? I have included it at line 15. The error of "Declaration missing ;" appears at line 8. Why? There is ";" at the end of the line. #include<iostream> using namespace std; class PEmployee { public: PEmployee(); PEmployee(string employee_name, double initial_salary); void set_salary(double new_salary); double get_salary() const; string get_name() const; private: Person person_data; double salary; }; //line 15 int main() { PEmployee f("Patrick", 1000.00); cout << f.get_name() << " earns a salary of " << f.get_salary() << endl; return 0; } Newbie here, sorry for unclear question

Read the article

Enabling Kerberos Authentication for Reporting Services

- by robcarrol

Recently, I’ve helped several customers with Kerberos authentication problems with Reporting Services and Analysis Services, so I’ve decided to write this blog post and pull together some useful resources in one place (there are 2 whitepapers in particular that I found invaluable configuring Kerberos authentication, and these can be found in the references section at the bottom of this post). In most of these cases, the problem has manifested itself with the Login failed for User ‘NT Authority\Anonymous’ (“double-hop”) error. By default, Reporting Services uses Windows Integrated Authentication, which includes the Kerberos and NTLM protocols for network authentication. Additionally, Windows Integrated Authentication includes the negotiate security header, which prompts the client to select Kerberos or NTLM for authentication. The client can access reports which have the appropriate permissions by using Kerberos for authentication. Servers that use Kerberos authentication can impersonate those clients and use their security context to access network resources. You can configure Reporting Services to use both Kerberos and NTLM authentication; however this may lead to a failure to authenticate. With negotiate, if Kerberos cannot be used, the authentication method will default to NTLM. When negotiate is enabled, the Kerberos protocol is always used except when: Clients/servers that are involved in the authentication process cannot use Kerberos. The client does not provide the information necessary to use Kerberos. An in-depth discussion of Kerberos authentication is beyond the scope of this post, however when users execute reports that are configured to use Windows Integrated Authentication, their logon credentials are passed from the report server to the server hosting the data source. Delegation needs to be set on the report server and Service Principle Names (SPNs) set for the relevant services. When a user processes a report, the request must go through a Web server on its way to a database server for processing. Kerberos authentication enables the Web server to request a service ticket from the domain controller; impersonate the client when passing the request to the database server; and then restrict the request based on the user’s permissions. Each time a server is required to pass the request to another server, the same process must be used. Kerberos authentication is supported in both native and SharePoint integrated mode, but I’ll focus on native mode for the purpose of this post (I’ll explain configuring SharePoint integrated mode and Kerberos authentication in a future post). Configuring Kerberos avoids the authentication failures due to double-hop issues. These double-hop errors occur when a users windows domain credentials can’t be passed to another server to complete the user’s request. In the case of my customers, users were executing Reporting Services reports that were configured to query Analysis Services cubes on a separate machine using Windows Integrated security. The double-hop issue occurs as NTLM credentials are valid for only one network hop, subsequent hops result in anonymous authentication. The client attempts to connect to the report server by making a request from a browser (or some other application), and the connection process begins with authentication. With NTLM authentication, client credentials are presented to Computer 2. However Computer 2 can’t use the same credentials to access Computer 3 (so we get the Anonymous login error). To access Computer 3 it is necessary to configure the connection string with stored credentials, which is what a number of customers I have worked with have done to workaround the double-hop authentication error. However, to get the benefits of Windows Integrated security, a better solution is to enable Kerberos authentication. Again, the connection process begins with authentication. With Kerberos authentication, the client and the server must demonstrate to one another that they are genuine, at which point authentication is successful and a secure client/server session is established. In the illustration above, the tiers represent the following: Client tier (computer 1): The client computer from which an application makes a request. Middle tier (computer 2): The Web server or farm where the client’s request is directed. Both the SharePoint and Reporting Services server(s) comprise the middle tier (but we’re only concentrating on native deployments just now). Back end tier (computer 3): The Database/Analysis Services server/Cluster where the requested data is stored. In order to enable Kerberos authentication for Reporting Services it’s necessary to configure the relevant SPNs, configure trust for delegation for server accounts, configure Kerberos with full delegation and configure the authentication types for Reporting Services. Service Principle Names (SPNs) are unique identifiers for services and identify the account’s type of service. If an SPN is not configured for a service, a client account will be unable to authenticate to the servers using Kerberos. You need to be a domain administrator to add an SPN, which can be added using the SetSPN utility. For Reporting Services in native mode, the following SPNs need to be registered --SQL Server Service SETSPN -S mssqlsvc/servername:1433 Domain\SQL For named instances, or if the default instance is running under a different port, then the specific port number should be used. --Reporting Services Service SETSPN -S http/servername Domain\SSRS SETSPN -S http/servername.domain.com Domain\SSRS The SPN should be set for the NETBIOS name of the server and the FQDN. If you access the reports using a host header or DNS alias, then that should also be registered SETSPN -S http/www.reports.com Domain\SSRS --Analysis Services Service SETSPN -S msolapsvc.3/servername Domain\SSAS Next, you need to configure trust for delegation, which refers to enabling a computer to impersonate an authenticated user to services on another computer: Location Description Client 1. The requesting application must support the Kerberos authentication protocol. 2. The user account making the request must be configured on the domain controller. Confirm that the following option is not selected: Account is sensitive and cannot be delegated. Servers 1. The service accounts must be trusted for delegation on the domain controller. 2. The service accounts must have SPNs registered on the domain controller. If the service account is a domain user account, the domain administrator must register the SPNs. In Active Directory Users and Computers, verify that the domain user accounts used to access reports have been configured for delegation (the ‘Account is sensitive and cannot be delegated’ option should not be selected): We then need to configure the Reporting Services service account and computer to use Kerberos with full delegation: We also need to do the same for the SQL Server or Analysis Services service accounts and computers (depending on what type of data source you are connecting to in your reports). Finally, and this is the part that sometimes gets over-looked, we need to configure the authentication type correctly for reporting services to use Kerberos authentication. This is configured in the Authentication section of the RSReportServer.config file on the report server. <Authentication> <AuthenticationTypes> <RSWindowsNegotiate/> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> </Authentication> This will enable Kerberos authentication for Internet Explorer. For other browsers, see the link below. The report server instance must be restarted for these changes to take effect. Once these changes have been made, all that’s left to do is test to make sure Kerberos authentication is working properly by running a report from report manager that is configured to use Windows Integrated authentication (either connecting to Analysis Services or SQL Server back-end). Resources: Manage Kerberos Authentication Issues in a Reporting Services Environment http://download.microsoft.com/download/B/E/1/BE1AABB3-6ED8-4C3C-AF91-448AB733B1AF/SSRSKerberos.docx Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23176 How to: Configure Windows Authentication in Reporting Services http://msdn.microsoft.com/en-us/library/cc281253.aspx RSReportServer Configuration File http://msdn.microsoft.com/en-us/library/ms157273.aspx#Authentication Planning for Browser Support http://msdn.microsoft.com/en-us/library/ms156511.aspx

Read the article

Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1

- by rajbk

The Open Data Protocol, referred to as OData, is a new data-sharing standard that breaks down silos and fosters an interoperative ecosystem for data consumers (clients) and producers (services) that is far more powerful than currently possible. It enables more applications to make sense of a broader set of data, and helps every data service and client add value to the whole ecosystem. WCF Data Services (previously known as ADO.NET Data Services), then, was the first Microsoft technology to support the Open Data Protocol in Visual Studio 2008 SP1. It provides developers with client libraries for .NET, Silverlight, AJAX, PHP and Java. Microsoft now also supports OData in SQL Server 2008 R2, Windows Azure Storage, Excel 2010 (through PowerPivot), and SharePoint 2010. Many other other applications in the works. * This post walks you through how to create an OData feed, define a shape for the data and pre-filter the data using Visual Studio 2010, WCF Data Services and the Entity Framework. A sample project is attached at the bottom of Part 2 of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Create the Web Application File –› New –› Project, Select “ASP.NET Empty Web Application” Add the Entity Data Model Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “ADO.NET Entity Data Model” under "Data”. Name the Model “Northwind” and click “Add”. In the “Choose Model Contents”, select “Generate Model From Database” and click “Next” Define a connection to your database containing the Northwind database in the next screen. We are going to expose the Products table through our OData feed. Select “Products” in the “Choose your Database Object” screen. Click “Finish”. We are done creating our Entity Data Model. Save the Northwind.edmx file created. Add the WCF Data Service Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “WCF Data Service” from the list and call the service “DataService” (creative, huh?). Click “Add”. Enable Access to the Data Service Open the DataService.svc.cs class. The class is well commented and instructs us on the next steps. public class DataService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } Replace the comment that starts with “/* TODO:” with “NorthwindEntities” (the entity container name of the Model we created earlier). WCF Data Services is initially locked down by default, FTW! No data is exposed without you explicitly setting it. You have explicitly specify which Entity sets you wish to expose and what rights are allowed by using the SetEntitySetAccessRule. The SetServiceOperationAccessRule on the other hand sets rules for a specified operation. Let us define an access rule to expose the Products Entity we created earlier. We use the EnititySetRights.AllRead since we want to give read only access. Our modified code is shown below. public class DataService : DataService<NorthwindEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Products", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } We are done setting up our ODataFeed! Compile your project. Right click on DataService.svc and select “View in Browser” to see the OData feed. To view the feed in IE, you must make sure that "Feed Reading View" is turned off. You set this under Tools -› Internet Options -› Content tab. If you navigate to “Products”, you should see the Products feed. Note also that URIs are case sensitive. ie. Products work but products doesn’t. Filtering our data OData has a set of system query operations you can use to perform common operations against data exposed by the model. For example, to see only Products in CategoryID 2, we can use the following request: /DataService.svc/Products?$filter=CategoryID eq 2 At the time of this writing, supported operations are $orderby, $top, $skip, $filter, $expand, $format†, $select, $inlinecount. Pre-filtering our data using Query Interceptors The Product feed currently returns all Products. We want to change that so that it contains only Products that have not been discontinued. WCF introduces the concept of interceptors which allows us to inject custom validation/policy logic into the request/response pipeline of a WCF data service. We will use a QueryInterceptor to pre-filter the data so that it returns only Products that are not discontinued. To create a QueryInterceptor, write a method that returns an Expression<Func<T, bool>> and mark it with the QueryInterceptor attribute as shown below. [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.Discontinued == false; } Viewing the feed after compilation will only show products that have not been discontinued. We also confirm this by looking at the WHERE clause in the SQL generated by the entity framework. SELECT [Extent1].[ProductID] AS [ProductID], ... ... [Extent1].[Discontinued] AS [Discontinued] FROM [dbo].[Products] AS [Extent1] WHERE 0 = [Extent1].[Discontinued] Other examples of Query/Change interceptors can be seen here including an example to filter data based on the identity of the authenticated user. We are done pre-filtering our data. In the next part of this post, we will see how to shape our data. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Foot Notes * http://msdn.microsoft.com/en-us/data/aa937697.aspx † $format did not work for me. The way to get a Json response is to include the following in the request header “Accept: application/json, text/javascript, */*” when making the request. This is easily done with most JavaScript libraries.

Read the article

Xobni Free Powers Up Outlook’s Search and Contacts

- by Matthew Guay

Want to find out more about your contacts, discover email trends, and even sync Yahoo! email accounts in Outlook? Here’s how you can do this and more with Xobni Free. Email is one of the most important communications mediums today, but even with all of the advances in Outlook over the years it can still be difficult to keep track of conversations, files, and contacts. Xobni makes it easy by indexing your emails and organizing them by sender. You can use its powerful search to quickly find any email, find related messages, and then view more information about that contact with information from social networks. And, to top it off, it even lets you view your Yahoo! emails directly in Outlook without upgrading to a Yahoo! Plus account. Xobni runs in Outlook 2003, 2007, and 2010, including the 64 bit version of Outlook 2010, and users of older versions will especially enjoy the new features Xobni brings for free. Getting started Download the Xobni Free installer (link below), and run to start the installation. Make sure to exit Outlook before installing. Xobni may need to download additional files which may take a few moments. When the download is finished, proceed with the install as normal. You can opt out of the Product Improvement Program at the end of the installation by unchecking the box. Additionally, you are asked to share Xobni with your friends on social networks, but this is not required. Next time you open Outlook, you’ll notice the new Xobni sidebar in Outlook. You can choose to watch an introduction video that will help you quickly get up to speed on how Xobni works. While this is playing, Xobni is working at indexing your email in the background. Once the first indexing is finished, click Let’s Go! to start using Xobni. Here’s how Xobni looks in Outlook 2010: Advanced Email Information Select an email, and now you can see lots of info about it in your new Xobni sidebar. On the top of the sidebar, select the graph icon to see when and how often you email with a contact. Each contact is given an Xobni rank so you can quickly see who you email the most. You can see all related emails sorted into conversations, and also all attachments in the conversation, not just this email. Xobni can also show you all scheduled appointments and links exchanged with a contact, but this is only available in the Plus version. If you’d rather not see the tab for a feature you can’t use, click Don’t show this tab to banish it from Xobni for good. Searching emails from the Xobni toolbar is very fast, and you can preview a message by simply hovering over it from the search pane. Get More Information About Your Contacts Xobni’s coolest feature is its social integration. Whenever you select an email, you may see a brief bio, picture, and more, all pulled from social networks. Select one of the tabs to find more information. You may need to login to view information on your contacts from certain networks. The Twitter tab lets you see recent tweets. Xobni will search for related Twitter accounts, and will ask you to confirm if the choice is correct. Now you can see this contact’s recent Tweets directly from Outlook. The Hoovers tab can give you interesting information about the businesses you’re in contact with. If the information isn’t correct, you can edit it and add your own information. Click the Edit button, and the add any information you want. You can also remove a network you don’t wish to see. Right-click on the network tabs, select Manage Extensions, and uncheck any you don’t want to see. But sometimes online contact just doesn’t cut it. For these times, click on the orange folder button to request a contact’s phone number or schedule a time with them. This will open a new email message ready to send with the information you want. Edit as you please, and send. Add Yahoo! Email to Outlook for Free One of Xobni’s neatest features is that it let’s you add your Yahoo! email account to Outlook for free. Click the gear icon in the bottom of the Xobni sidebar and select Options to set it up. Select the Integration tab, and click Enable to add Yahoo! mail to Xobni. Sign in with your Yahoo! account, and make sure to check the Keep me signed in box. Note that you may have to re-signin every two weeks to keep your Yahoo! account connected. Select I agree to finish setting it up. Xobni will now download and index your recent Yahoo! mail. Your Yahoo! messages will only show up in the Xobni sidebar. Whenever you select a contact, you will see related messages from your Yahoo! account as well. Or, you can search from the sidebar to find individual messages from your Yahoo! account. Note the Y! logo beside Yahoo! messages. Select a message to read it in the Sidebar. You can open the email in Yahoo! in your browser, or can reply to it using your default Outlook email account. If you have many older messages in your Yahoo! account, make sure to go back to the Integration tab and select Index Yahoo! Mail to index all of your emails. Conclusion Xobni is a great tool to help you get more out of your daily Outlook experience. Whether you struggle to find attachments a coworker sent you or want to access Yahoo! email from Outlook, Xobni might be the perfect tool for you. And with the extra things you learn about your contacts with the social network integration, you might boost your own PR skills without even trying! Link Download Xobni Similar Articles Productive Geek Tips Speed up Windows Vista Start Menu Search By Limiting ResultsFix for New Contact Group Button Not Displaying in VistaGet Maps and Directions to Your Contacts in Outlook 2007Backup Windows Mail Messages and Contacts in VistaHow to Import Gmail Contacts Into Outlook 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

Read the article

Getting MySQL work with Entity Framework 4.0

- by DigiMortal

Does MySQL work with Entity Framework 4.0? The answer is: yes, it works! I just put up one experimental project to play with MySQL and Entity Framework 4.0 and in this posting I will show you how to get MySQL data to EF. Also I will give some suggestions how to deploy your applications to hosting and cloud environments. MySQL stuff As you may guess you need MySQL running somewhere. I have MySQL installed to my development machine so I can also develop stuff when I’m offline. The other thing you need is MySQL Connector for .NET Framework. Currently there is available development version of MySQL Connector/NET 6.3.5 that supports Visual Studio 2010. Before you start download MySQL and Connector/NET: MySQL Community Server Connector/NET 6.3.5 If you are not big fan of phpMyAdmin then you can try out free desktop client for MySQL – HeidiSQL. I am using it and I am really happy with this program. NB! If you just put up MySQL then create also database with couple of table there. To use all features of Entity Framework 4.0 I suggest you to use InnoDB or other engine that has support for foreign keys. Connecting MySQL to Entity Framework 4.0 Now create simple console project using Visual Studio 2010 and go through the following steps. 1. Add new ADO.NET Entity Data Model to your project. For model insert the name that is informative and that you are able later recognize. Now you can choose how you want to create your model. Select “Generate from database” and click OK. 2. Set up database connection Change data connection and select MySQL Database as data source. You may also need to set provider – there is only one choice. Select it if data provider combo shows empty value. Click OK and insert connection information you are asked about. Don’t forget to click test connection button to see if your connection data is okay. If everything works then click OK. 3. Insert context name Now you should see the following dialog. Insert your data model name for application configuration file and click OK. Click next button. 4. Select tables for model Now you can select tables and views your classes are based on. I have small database with events data. Uncheck the checkbox “Include foreign key columns in the model” – it is damn annoying to get them away from model later. Also insert informative and easy to remember name for your model. Click finish button. 5. Define your classes Now it’s time to define your classes. Here you can see what Entity Framework generated for you. Relations were detected automatically – that’s why we needed foreign keys. The names of classes and their members are not nice yet. After some modifications my class model looks like on the following diagram. Note that I removed attendees navigation property from person class. Now my classes look nice and they follow conventions I am using when naming classes and their members. NB! Don’t forget to see properties of classes (properties windows) and modify their set names if set names contain numbers (I changed set name for Entity from Entity1 to Entities). 6. Let’s test! Now let’s write simple testing program to see if MySQL data runs through Entity Framework 4.0 as expected. My program looks for events where I attended. using(var context = new MySqlEntities()) { var myEvents = from e in context.Events from a in e.Attendees where a.Person.FirstName == "Gunnar" && a.Person.LastName == "Peipman" select e; Console.WriteLine("My events: "); foreach(var e in myEvents) { Console.WriteLine(e.Title); } } Console.ReadKey(); And when I run it I get the result shown on screenshot on right. I checked out from database and these results are correct. At first run connector seems to work slow but this is only the effect of first run. As connector is loaded to memory by Entity Framework it works fast from this point on. Now let’s see what we have to do to get our program work in hosting and cloud environments where MySQL connector is not installed. Deploying application to hosting and cloud environments If your hosting or cloud environment has no MySQL connector installed you have to provide MySQL connector assemblies with your project. Add the following assemblies to your project’s bin folder and include them to your project (otherwise they are not packaged by WebDeploy and Azure tools): MySQL.Data MySQL.Data.Entity MySQL.Web You can also add references to these assemblies and mark references as local so these assemblies are copied to binary folder of your application. If you have references to these assemblies then you don’t have to include them to your project from bin folder. Also add the following block to your application configuration file. <?xml version="1.0" encoding="utf-8"?> <configuration> ... <system.data> <DbProviderFactories> <add name=”MySQL Data Provider” invariant=”MySql.Data.MySqlClient” description=”.Net Framework Data Provider for MySQL” type=”MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.2.0.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d” /> </DbProviderFactories> </system.data> ... </configuration> Conclusion It was not hard to get MySQL connector installed and MySQL connected to Entity Framework 4.0. To use full power of Entity Framework we used InnoDB engine because it supports foreign keys. It was also easy to query our model. To get our project online we needed some easy modifications to our project and configuration files.

Read the article

Silverlight Recruiting Application Part 4 - Navigation and Modules

After our brief intermission (and the craziness of Q1 2010 release week), we're back on track here and today we get to dive into how we are going to navigate through our applications as well as how to set up our modules. That way, as I start adding the functionality- adding Jobs and Applicants, Interview Scheduling, and finally a handy Dashboard- you'll see how everything is communicating back and forth. This is all leading up to an eventual webinar, in which I'll dive into this process and give a honest look at the current story for MVVM vs. Code-Behind applications. (For a look at the future with SL4 and a little thing called MEF, check out what Ross is doing over at his blog!) Preamble... Before getting into really talking about this app, I've done a little bit of work ahead of time to create a ton of files that I'll need. Since the webinar is going to cover the Dashboard, it's not here, but otherwise this is a look at what the project layout looks like (and remember, this is both projects since they share the .Web): So as you can see, from an architecture perspective, the code-behind app is much smaller and more streamlined- aka a better fit for the one man shop that is me. Each module in the MVVM app has the same setup, which is the Module class and corresponding Views and ViewModels. Since the code-behind app doesn't need a go-between project like Infrastructure, each MVVM module is instead replaced by a single Silverlight UserControl which will contain all the logic for each respective bit of functionality. My Very First Module Navigation is going to be key to my application, so I figured the first thing I would setup is my MenuModule. First step here is creating a Silverlight Class Library named MenuModule, creatingthe View and ViewModel folders, and adding the MenuModule.cs class to handle module loading. The most important thing here is that my MenuModule inherits from IModule, which runs an Initialize on each module as it is created that, in my case, adds the views to the correct regions. Here's the MenuModule.cs code: public class MenuModule : IModule { private readonly IRegionManager regionManager; private readonly IUnityContainer container; public MenuModule(IUnityContainer container, IRegionManager regionmanager) { this.container = container; this.regionManager = regionmanager; } public void Initialize() { var addMenuView = container.Resolve<MenuView>(); regionManager.Regions["MenuRegion"].Add(addMenuView); } } Pretty straightforward here... We inject a container and region manager from Prism/Unity, then upon initialization we grab the view (out of our Views folder) and add it to the region it needs to live in. Simple, right? When the MenuView is created, the only thing in the code-behind is a reference to the set the MenuViewModel as the DataContext. I'd like to achieve MVVM nirvana and have zero code-behind by placing the viewmodel in the XAML, but for the reasons listed further below I can't. Navigation - MVVM Since navigation isn't the biggest concern in putting this whole thing together, I'm using the Button control to handle different options for loading up views/modules. There is another reason for this- out of the box, Prism has command support for buttons, which is one less custom command I had to work up for the functionality I would need. This comes from the Microsoft.Practices.Composite.Presentation assembly and looks as follows when put in code: <Button x:Name="xGoToJobs" Style="{StaticResource menuStyle}" Content="Jobs" cal:Click.Command="{Binding GoModule}" cal:Click.CommandParameter="JobPostingsView" /> For quick reference, 'menuStyle' is just taking care of margins and spacing, otherwise it looks, feels, and functions like everyone's favorite Button. What MVVM's this up is that the Click.Command is tying to a DelegateCommand (also coming fromPrism) on the backend. This setup allows you to tie user interaction to a command you setup in your viewmodel, which replaces the standard event-based setup you'd see in the code-behind app. Due to databinding magic, it all just works. When we get looking at the DelegateCommand in code, it ends up like this: public class MenuViewModel : ViewModelBase { private readonly IRegionManager regionManager; public DelegateCommand<object> GoModule { get; set; } public MenuViewModel(IRegionManager regionmanager) { this.regionManager = regionmanager; this.GoModule = new DelegateCommand<object>(this.goToView); } public void goToView(object obj) { MakeMeActive(this.regionManager, "MainRegion", obj.ToString()); } } Another for reference, ViewModelBase takes care of iNotifyPropertyChanged and MakeMeActive, which switches views in the MainRegion based on the parameters. So our public DelegateCommand GoModule ties to our command on the view, that in turn calls goToView, and the parameter on the button is the name of the view (which we pass with obj.ToString()) to activate. And how do the views get the names I can pass as a string? When I called regionManager.Regions[regionname].Add(view), there is an overload that allows for .Add(view, "viewname"), with viewname being what I use to activate views. You'll see that in action next installment, just wanted to clarify how that works. With this setup, I create two more buttons in my MenuView and the MenuModule is good to go. Last step is to make sure my MenuModule loads in my Bootstrapper: protected override IModuleCatalog GetModuleCatalog() { ModuleCatalog catalog = new ModuleCatalog(); // add modules here catalog.AddModule(typeof(MenuModule.MenuModule)); return catalog; } Clean, simple, MVVM-delicious. Navigation - Code-Behind Keeping with the history of significantly shorter code-behind sections of this series, Navigation will be no different. I promise. As I explained in a prior post, due to the one-project setup I don't have to worry about the same concerns so my menu is part of MainPage.xaml. So I can cheese-it a bit, though, since I've already got three buttons all set I'm just copying that code and adding three click-events instead of the command/commandparameter setup:  <StackPanel Grid.Row="1" Orientation="Vertical"> <Button x:Name="xJobsButton" Content="Jobs" Style="{StaticResource menuStyleCB}" Click="xJobsButton_Click" /> <Button x:Name="xApplicantsButton" Content="Applicants" Style="{StaticResource menuStyleCB}" Click="xApplicantsButton_Click" /> <Button x:Name="xSchedulingModule" Content="Scheduling" Style="{StaticResource menuStyleCB}" Click="xSchedulingModule_Click" /> </StackPanel> Simple, easy to use events, and no extra assemblies required! Since the code for loading each view will be similar, we'll focus on JobsView for now.The code-behind with this setup looks something like... private JobsView _jobsView; public MainPage() { InitializeComponent(); } private void xJobsButton_Click(object sender, RoutedEventArgs e) { if (MainRegion.Content.GetType() != typeof(JobsView)) { if (_jobsView == null) _jobsView = new JobsView(); MainRegion.Content = _jobsView; } } What am I doing here? First, for each 'view' I create a private reference which MainPage will hold on to. This allows for a little bit of state-maintenance when switching views. When a button is clicked, first we make sure the 'view' typeisn't active (why load it again if it is already at center stage?), then we check if the view has been created and create if necessary, then load it up. Three steps to switching views and is easy as pie. Part 4 Results The end result of all this is that I now have a menu module (MVVM) and a menu section (code-behind) that load their respective views. Since I'm using the same exact XAML (except with commands/events depending on the project), the end result for both is again exactly the same and I'll show a slightly larger image to show it off: Next time, we add the Jobs Module and wire up RadGridView and a separate edit page to handle adding and editing new jobs. That's when things get fun. And somewhere down the line, I'll make the menu look slicker. :) Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

readonly keyword

- by nmarun

This is something new that I learned about the readonly keyword. Have a look at the following class: 1: public class MyClass 2: { 3: public string Name { get; set; } 4: public int Age { get; set; } 5: 6: private readonly double Delta; 7: 8: public MyClass() 9: { 10: Initializer(); 11: } 12: 13: public MyClass(string name = "", int age = 0) 14: { 15: Name = name; 16: Age = age; 17: Initializer(); 18: } 19: 20: private void Initializer() 21: { 22: Delta = 0.2; 23: } 24: } I have a couple of public properties and a private readonly member. There are two constructors – one that doesn’t take any parameters and the other takes two parameters to initialize the public properties. I’m also calling the Initializer method in both constructors to initialize the readonly member. Now when I build this, the code breaks and the Error window says: “A readonly field cannot be assigned to (except in a constructor or a variable initializer)” Two things after I read this message: It’s such a negative statement. I’d prefer something like: “A readonly field can be assigned to (or initialized) only in a constructor or through a variable initializer” But in my defense, I AM assigning it in a constructor (only indirectly). All I’m doing is creating a method that does it and calling it in a constructor. Turns out, .net was not ‘frameworked’ this way. We need to have the member initialized directly in the constructor. If you have multiple constructors, you can just use the ‘this’ keyword on all except the default constructors to call the default constructor. This default constructor can then initialize your readonly members. This will ensure you’re not repeating the code in multiple places. A snippet of what I’m talking can be seen below: 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8: 9: private readonly string Alpha; 10: private readonly int Beta; 11: private readonly double Delta; 12: private readonly double Gamma; 13: 14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21: 22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: } 26: } See the syntax in line 22 and you’ll know what I’m talking about. So the default constructor gets called before the one in line 22. These are known as constructor initializers and they allow one constructor to call another. The other ‘myth’ I had about readonly members is that you can set it’s value only once. This was busted as well (I recall Adam and Jamie’s show). Say you’ve initialized the readonly member through a variable initializer. You can over-write this value in any of the constructors any number of times. 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8: 9: private readonly string Alpha = "asdf"; 10: private readonly int Beta = 15; 11: private readonly double Delta = 0.077; 12: private readonly double Gamma = 1.0; 13: 14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21: 22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: Beta = 3; 26: } 27: 28: public Person(string name, DateTime dob) : this() 29: { 30: Name = name; 31: DateOfBirth = dob; 32: 33: Alpha = ";LKJ"; 34: Gamma = 0.0898; 35: } 36: 37: public Person(int uniqueNumber, string name, int age, DateTime dob, string invoiceNumber) : this() 38: { 39: UniqueNumber = uniqueNumber; 40: Name = name; 41: Age = age; 42: DateOfBirth = dob; 43: InvoiceNumber = invoiceNumber; 44: 45: Alpha = "QWER"; 46: Beta = 5; 47: Delta = 1.0; 48: Gamma = 0.0; 49: } 50: } In the above example, every constructor over-writes the values for the readonly members. This is perfectly valid. There is a possibility that based on the way the object is instantiated, the readonly member will have a different value. Well, that’s all I have for today and read this as it’s on a related topic.

Read the article

Move penetrating OBB out of another OBB to resolve collision

- by Milo

I'm working on collision resolution for my game. I just need a good way to get an object out of another object if it gets stuck. In this case a car. Here is a typical scenario. The red car is in the green object. How do I correctly get it out so the car can slide along the edge of the object as it should. I tried: if(buildings.size() > 0) { Entity e = buildings.get(0); Vector2D vel = new Vector2D(); vel.x = vehicle.getVelocity().x; vel.y = vehicle.getVelocity().y; vel.normalize(); while(vehicle.getRect().overlaps(e.getRect())) { vehicle.setCenter(vehicle.getCenterX() - vel.x * 0.1f, vehicle.getCenterY() - vel.y * 0.1f); } colided = true; } But that does not work too well. Is there some sort of vector I could calculate to use as the vector to move the car away from the object? Thanks Here is my OBB2D class: public class OBB2D { // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(Vector2D center, float w, float h, float angle) { set(center,w,h,angle); } public OBB2D(float left, float top, float width, float height) { set(new Vector2D(left + (width / 2), top + (height / 2)),width,height,0.0f); } public void set(Vector2D center,float w, float h,float angle) { Vector2D X = new Vector2D( (float)Math.cos(angle), (float)Math.sin(angle)); Vector2D Y = new Vector2D((float)-Math.sin(angle), (float)Math.cos(angle)); X = X.multiply( w / 2); Y = Y.multiply( h / 2); corner[0] = center.subtract(X).subtract(Y); corner[1] = center.add(X).subtract(Y); corner[2] = center.add(X).add(Y); corner[3] = center.subtract(X).add(Y); computeAxes(); extents.x = w / 2; extents.y = h / 2; computeDimensions(center,angle); } private void computeDimensions(Vector2D center,float angle) { this.center.x = center.x; this.center.y = center.y; this.angle = angle; boundingRect.left = Math.min(Math.min(corner[0].x, corner[3].x), Math.min(corner[1].x, corner[2].x)); boundingRect.top = Math.min(Math.min(corner[0].y, corner[1].y),Math.min(corner[2].y, corner[3].y)); boundingRect.right = Math.max(Math.max(corner[1].x, corner[2].x), Math.max(corner[0].x, corner[3].x)); boundingRect.bottom = Math.max(Math.max(corner[2].y, corner[3].y),Math.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(new Vector2D(rect.centerX(),rect.centerY()),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0] = corner[1].subtract(corner[0]); axis[1] = corner[3].subtract(corner[0]); // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { axis[a] = axis[a].divide((axis[a].length() * axis[a].length())); origin[a] = corner[0].dot(axis[a]); } } public void moveTo(Vector2D center) { Vector2D centroid = (corner[0].add(corner[1]).add(corner[2]).add(corner[3])).divide(4.0f); Vector2D translation = center.subtract(centroid); for (int c = 0; c < 4; ++c) { corner[c] = corner[c].add(translation); } computeAxes(); computeDimensions(center,angle); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } };

Read the article

Finding the normal of OBB face with an OBB penetrating

- by Milo

Below is an illustration: I have an OBB in an OBB (see below for OBB2D code if needed). What I need to determine is, what face it is in, and what direction do I point the normal? The goal is to get the OBB out of the OBB so the normal needs to face outward of the OBB. How could I go about: Finding what face the line is penetrating given the 4 corners of the OBB and the class below: if we define dx=x2-x1 and dy=y2-y1, then the normals are (-dy, dx) and (dy, -dx). Which normal points outward of the OBB? Thanks public class OBB2D { // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(Vector2D center, float w, float h, float angle) { set(center,w,h,angle); } public OBB2D(float left, float top, float width, float height) { set(new Vector2D(left + (width / 2), top + (height / 2)),width,height,0.0f); } public void set(Vector2D center,float w, float h,float angle) { Vector2D X = new Vector2D( (float)Math.cos(angle), (float)Math.sin(angle)); Vector2D Y = new Vector2D((float)-Math.sin(angle), (float)Math.cos(angle)); X = X.multiply( w / 2); Y = Y.multiply( h / 2); corner[0] = center.subtract(X).subtract(Y); corner[1] = center.add(X).subtract(Y); corner[2] = center.add(X).add(Y); corner[3] = center.subtract(X).add(Y); computeAxes(); extents.x = w / 2; extents.y = h / 2; computeDimensions(center,angle); } private void computeDimensions(Vector2D center,float angle) { this.center.x = center.x; this.center.y = center.y; this.angle = angle; boundingRect.left = Math.min(Math.min(corner[0].x, corner[3].x), Math.min(corner[1].x, corner[2].x)); boundingRect.top = Math.min(Math.min(corner[0].y, corner[1].y),Math.min(corner[2].y, corner[3].y)); boundingRect.right = Math.max(Math.max(corner[1].x, corner[2].x), Math.max(corner[0].x, corner[3].x)); boundingRect.bottom = Math.max(Math.max(corner[2].y, corner[3].y),Math.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(new Vector2D(rect.centerX(),rect.centerY()),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0] = corner[1].subtract(corner[0]); axis[1] = corner[3].subtract(corner[0]); // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { axis[a] = axis[a].divide((axis[a].length() * axis[a].length())); origin[a] = corner[0].dot(axis[a]); } } public void moveTo(Vector2D center) { Vector2D centroid = (corner[0].add(corner[1]).add(corner[2]).add(corner[3])).divide(4.0f); Vector2D translation = center.subtract(centroid); for (int c = 0; c < 4; ++c) { corner[c] = corner[c].add(translation); } computeAxes(); computeDimensions(center,angle); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } };

Read the article

OS Analytics - Deep Dive Into Your OS

- by Eran_Steiner

Enterprise Manager Ops Center provides a feature called "OS Analytics". This feature allows you to get a better understanding of how the Operating System is being utilized. You can research the historical usage as well as real time data. This post will show how you can benefit from OS Analytics and how it works behind the scenes. We will have a call to discuss this blog - please join us!Date: Thursday, November 1, 2012Time: 11:00 am, Eastern Daylight Time (New York, GMT-04:00)1. Go to https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209833067&UID=1512092402&PW=NY2JhMmFjMmFh&RT=MiMxMQ%3D%3D2. If requested, enter your name and email address.3. If a password is required, enter the meeting password: oracle1234. Click "Join". To join the teleconference:Call-in toll-free number: 1-866-682-4770 (US/Canada) Other countries: https://oracle.intercallonline.com/portlets/scheduling/viewNumbers/viewNumber.do?ownerNumber=5931260&audioType=RP&viewGa=true&ga=ONConference Code: 7629343#Security code: 7777# Here is quick summary of what you can do with OS Analytics in Ops Center: View historical charts and real time value of CPU, memory, network and disk utilization Find the top CPU and Memory processes in real time or at a certain historical day Determine proper monitoring thresholds based on historical data View Solaris services status details Drill down into a process details View the busiest zones if applicable Where to start To start with OS Analytics, choose the OS asset in the tree and click the Analytics tab. You can see the CPU utilization, Memory utilization and Network utilization, along with the current real time top 5 processes in each category (click the image to see a larger version): In the above screen, you can click each of the top 5 processes to see a more detailed view of that process. Here is an example of one of the processes: One of the cool things is that you can see the process tree for this process along with some port binding and open file descriptors. On Solaris machines with zones, you get an extra level of tabs, allowing you to get more information on the different zones: This is a good way to see the busiest zones. For example, one zone may not take a lot of CPU but it can consume a lot of memory, or perhaps network bandwidth. To see the detailed Analytics for each of the zones, simply click each of the zones in the tree and go to its Analytics tab. Next, click the "Processes" tab to see real time information of all the processes on the machine: An interesting column is the "Target" column. If you configured Ops Center to work with Enterprise Manager Cloud Control, then the two products will talk to each other and Ops Center will display the correlated target from Cloud Control in this table. If you are only using Ops Center - this column will remain empty. Next, if you view a Solaris machine, you will have a "Services" tab: By default, all services will be displayed, but you can choose to display only certain states, for example, those in maintenance or the degraded ones. You can highlight a service and choose to view the details, where you can see the Dependencies, Dependents and also the location of the service log file (not shown in the picture as you need to scroll down to see the log file). The "Threshold" tab is particularly helpful - you can view historical trends of different monitored values and based on the graph - determine what the monitoring values should be: You can ask Ops Center to suggest monitoring levels based on the historical values or you can set your own. The different colors in the graph represent the current set levels: Red for critical, Yellow for warning and Blue for Information, allowing you to quickly see how they're positioned against real data. It's important to note that when looking at longer periods, Ops Center smooths out the data and uses averages. So when looking at values such as CPU Usage, try shorter time frames which are more detailed, such as one hour or one day. Applying new monitoring values When first applying new values to monitored attributes - a popup will come up asking if it's OK to get you out of the current Monitoring Policy. This is OK if you want to either have custom monitoring for a specific machine, or if you want to use this current machine as a "Gold image" and extract a Monitoring Policy from it. You can later apply the new Monitoring Policy to other machines and also set it as a default Monitoring Profile. Once you're done with applying the different monitoring values, you can review and change them in the "Monitoring" tab. You can also click the "Extract a Monitoring Policy" in the actions pane on the right to save all the new values to a new Monitoring Policy, which can then be found under "Plan Management" -> "Monitoring Policies". Visiting the past Under the "History" tab you can "go back in time". This is very helpful when you know that a machine was busy a few hours ago (perhaps in the middle of the night?), but you were not around to take a look at it in real time. Here's a view into yesterday's data on one of the machines: You can see an interesting CPU spike happening at around 3:30 am along with some memory use. In the bottom table you can see the top 5 CPU and Memory consumers at the requested time. Very quickly you can see that this spike is related to the Solaris 11 IPS repository synchronization process using the "pkgrecv" command. The "time machine" doesn't stop here - you can also view historical data to determine which of the zones was the busiest at a given time: Under the hood The data collected is stored on each of the agents under /var/opt/sun/xvm/analytics/historical/ An "os.zip" file exists for the main OS. Inside you will find many small text files, named after the Epoch time stamp in which they were taken If you have any zones, there will be a file called "guests.zip" containing the same small files for all the zones, as well as a folder with the name of the zone along with "os.zip" in it If this is the Enterprise Controller or the Proxy Controller, you will have folders called "proxy" and "sat" in which you will find the "os.zip" for that controller The actual script collecting the data can be viewed for debugging purposes as well: On Linux, the location is: /opt/sun/xvmoc/private/os_analytics/collect On Solaris, the location is /opt/SUNWxvmoc/private/os_analytics/collect If you would like to redirect all the standard error into a file for debugging, touch the following file and the output will go into it: # touch /tmp/.collect.stderr The temporary data is collected under /var/opt/sun/xvm/analytics/.collectdb until it is zipped. If you would like to review the properties for the Analytics, you can view those per each agent in /opt/sun/n1gc/lib/XVM.properties. Find the section "Analytics configurable properties for OS and VSC" to view the Analytics specific values. I hope you find this helpful! Please post questions in the comments below. Eran Steiner

Read the article

How to use Azure storage for uploading and displaying pictures.

- by Magnus Karlsson

Basic set up of Azure storage for local development and production. This is a somewhat completion of the following guide from http://www.windowsazure.com/en-us/develop/net/how-to-guides/blob-storage/ that also involves a practical example that I believe is commonly used, i.e. upload and present an image from a user. First we set up for local storage and then we configure for them to work on a web role. Steps: 1. Configure connection string locally. 2. Configure model, controllers and razor views. 1. Setup connectionsstring 1.1 Right click your web role and choose “Properties”. 1.2 Click Settings. 1.3 Add setting. 1.4 Name your setting. This will be the name of the connectionstring. 1.5 Click the ellipsis to the right. (the ellipsis appear when you mark the area. 1.6 The following window appears- Select “Windows Azure storage emulator” and click ok. Now we have a connection string to use. To be able to use it we need to make sure we have windows azure tools for storage. 2.1 Click Tools –> Library Package manager –> Manage Nuget packages for solution. 2.2 This is what it looks like after it has been added. Now on to what the code should look like. 3.1 First we need a view which collects images to upload. Here Index.cshtml. 1: @model List<string> 2: 3: @{ 4: ViewBag.Title = "Index"; 5: } 6: 7: <h2>Index</h2> 8: <form action="@Url.Action("Upload")" method="post" enctype="multipart/form-data"> 9: 10: <label for="file">Filename:</label> 11: <input type="file" name="file" id="file1" /> 12: <br /> 13: <label for="file">Filename:</label> 14: <input type="file" name="file" id="file2" /> 15: <br /> 16: <label for="file">Filename:</label> 17: <input type="file" name="file" id="file3" /> 18: <br /> 19: <label for="file">Filename:</label> 20: <input type="file" name="file" id="file4" /> 21: <br /> 22: <input type="submit" value="Submit" /> 23: 24: </form> 25: 26: @foreach (var item in Model) { 27: 28: <img src="@item" alt="Alternate text"/> 29: } 3.2 We need a controller to receive the post. Notice the “containername” string I send to the blobhandler. I use this as a folder for the pictures for each user. If this is not a requirement you could just call it container or anything with small characters directly when creating the container. 1: public ActionResult Upload(IEnumerable<HttpPostedFileBase> file) 2: { 3: BlobHandler bh = new BlobHandler("containername"); 4: bh.Upload(file); 5: var blobUris=bh.GetBlobs(); 6: 7: return RedirectToAction("Index",blobUris); 8: } 3.3 The handler model. I’ll let the comments speak for themselves. 1: public class BlobHandler 2: { 3: // Retrieve storage account from connection string. 4: CloudStorageAccount storageAccount = CloudStorageAccount.Parse( 5: CloudConfigurationManager.GetSetting("StorageConnectionString")); 6: 7: private string imageDirecoryUrl; 8: 9: /// <summary> 10: /// Receives the users Id for where the pictures are and creates 11: /// a blob storage with that name if it does not exist. 12: /// </summary> 13: /// <param name="imageDirecoryUrl"></param> 14: public BlobHandler(string imageDirecoryUrl) 15: { 16: this.imageDirecoryUrl = imageDirecoryUrl; 17: // Create the blob client. 18: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 19: 20: // Retrieve a reference to a container. 21: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 22: 23: // Create the container if it doesn't already exist. 24: container.CreateIfNotExists(); 25: 26: //Make available to everyone 27: container.SetPermissions( 28: new BlobContainerPermissions 29: { 30: PublicAccess = BlobContainerPublicAccessType.Blob 31: }); 32: } 33: 34: public void Upload(IEnumerable<HttpPostedFileBase> file) 35: { 36: // Create the blob client. 37: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 38: 39: // Retrieve a reference to a container. 40: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 41: 42: if (file != null) 43: { 44: foreach (var f in file) 45: { 46: if (f != null) 47: { 48: CloudBlockBlob blockBlob = container.GetBlockBlobReference(f.FileName); 49: blockBlob.UploadFromStream(f.InputStream); 50: } 51: } 52: } 53: } 54: 55: public List<string> GetBlobs() 56: { 57: // Create the blob client. 58: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 59: 60: // Retrieve reference to a previously created container. 61: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 62: 63: List<string> blobs = new List<string>(); 64: 65: // Loop over blobs within the container and output the URI to each of them 66: foreach (var blobItem in container.ListBlobs()) 67: blobs.Add(blobItem.Uri.ToString()); 68: 69: return blobs; 70: } 71: } 3.4 So, when the files have been uploaded we will get them to present them to out user in the index page. Pretty straight forward. In this example we only present the image by sending the Uri’s to the view. A better way would be to save them up in a view model containing URI, metadata, alternate text, and other relevant information but for this example this is all we need. 4. Now press F5 in your solution to try it out. You can see the storage emulator UI here: 4.1 If you get any exceptions or errors I suggest to first check if the service Is running correctly. I had problem with this and they seemed related to the installation and a reboot fixed my problems. 5. Set up for Cloud storage. To do this we need to add configuration for cloud just as we did for local in step one. 5.1 We need our keys to do this. Go to the windows Azure menagement portal, select storage icon to the right and click “Manage keys”. (Image from a different blog post though). 5.2 Do as in step 1.but replace step 1.6 with: 1.6 Choose “Manually entered credentials”. Enter your account name. 1.7 Paste your Account Key from step 5.1. and click ok. 5.3. Save, publish and run! Please feel free to ask any questions using the comments form at the bottom of this page. I will get back to you to help you solve any questions. Our consultancy agency also provides services in the Nordic regions if you would like any further support.

Read the article

The code works but when using printf it gives me a weird answer. Help please [closed]

- by user71458

//Programmer-William Chen //Seventh Period Computer Science II //Problem Statement - First get the elapsed times and the program will find the //split times for the user to see. // //Algorithm- First the programmer makes the prototype and calls them in the //main function. The programmer then asks the user to input lap time data. //Secondly, you convert the splits into seconds and subtract them so you can //find the splits. Then the average is all the lap time's in seconds. Finally, //the programmer printf all the results for the user to see. #include <iostream> #include <stdlib.h> #include <math.h> #include <conio.h> #include <stdio.h> using namespace std; void thisgetsElapsedTimes( int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5); //this is prototype void thisconvertstoseconds ( int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5, int &split1, int &split2, int &split3, int &split4, int &split5);//this too void thisfindsSplits(int &m1, int &m2, int &m3, int &m4, int &m5, int &split1, int &split2, int &split3, int &split4, int &split5, int &split6, int &split7, int &split8, int &split9, int &split10);// this is part of prototype void thisisthesecondconversation (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S,int &split2S, int &split3S, int &split4S, int &split5S, int &split1, int &split2, int &split3, int &split4, int &split5);//this gets a value void thisfindstheaverage(double &average, int &split1, int &split2, int &split3, int &split4, int &split5);//and this void thisprintsstuff( int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S, int &split2S, int &split3S, int &split4S, int &split5S, double &average); //this prints int main(int argc, char *argv[]) { int m1, m2, m3, m4, m5, s1, s2, s3, s4, s5, split1, split2, split3, split4, split5, split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S; int split6, split7, split8, split9, split10; double average; char thistakescolon; thisgetsElapsedTimes ( m1, m2, m3, m4, m5, s1, s2, s3, s4, s5); thisconvertstoseconds ( m1, m2, m3, m4, m5, s1, s2, s3, s4, s5, split1, split2, split3, split4, split5); thisfindsSplits ( m1, m2, m3, m4, m5, split1, split2, split3, split4, split5, split6, split7, split8, split9, split10); thisisthesecondconversation ( split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S, split1, split2, split3, split4, split5); thisfindstheaverage ( average, split1, split2, split3, split4, split5); thisprintsstuff ( split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S, average); // these are calling statements and they call from the main function to the other functions. system("PAUSE"); return 0; } void thisgetsElapsedTimes(int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5) { char thistakescolon; cout << "Enter the elapsed time:" << endl; cout << " Kilometer 1 "; cin m1 thistakescolon s1; cout << " Kilometer 2 "; cin m2 thistakescolon s2; cout << " Kilometer 3 " ; cin m3 thistakescolon s3; cout << " Kilometer 4 "; cin m4 thistakescolon s4; cout << " Kilometer 5 "; cin m5 thistakescolon s5; // this gets the data required to get the results needed for the user to see // . } void thisconvertstoseconds (int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5, int &split1, int &split2, int &split3, int &split4, int &split5) { split1 = (m1 * 60) + s1;//this converts for minutes to seconds for m1 split2 = (m2 * 60) + s2;//this converts for minutes to seconds for m2 split3 = (m3 * 60) + s3;//this converts for minutes to seconds for m3 split4 = (m4 * 60) + s4;//this converts for minutes to seconds for m4 split5 = (m5 * 60) + s5;//this converts for minutes to seconds for m5 } void thisfindsSplits (int &m1, int &m2, int &m3, int &m4, int &m5,int &split1, int &split2, int &split3, int &split4, int &split5, int &split6, int &split7, int &split8, int &split9, int &split10)//this is function heading { split6 = split1; //this is split for the first lap. split7 = split2 - split1;//this is split for the second lap. split8 = split3 - split2;//this is split for the third lap. split9 = split4 - split3;//this is split for the fourth lap. split10 = split5 - split4;//this is split for the fifth lap. } void thisfindstheaverage(double &average, int &split1, int &split2, int &split3, int &split4, int &split5) { average = (split1 + split2 + split3 + split4 + split5)/5; // this finds the average from all the splits in seconds } void thisisthesecondconversation (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S,int &split2S, int &split3S, int &split4S, int &split5S, int &split1, int &split2, int &split3, int &split4, int &split5) { split1M = split1 * 60; //this finds the split times split1S = split1M - split1 * 60; //then this finds split2M = split2 * 60; //and all of this split2S = split2M - split2 * 60; //does basically split3M = split3 * 60; //the same thing split3S = split3M - split3 * 60; //all of it split4M = split4 * 60; //it's also a split4S = split4M - split4 * 60; //function split5M = split5 * 60; //and it finds the splits split5S = split5M - split5 * 60; //for each lap. } void thisprintsstuff (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S, int &split2S, int &split3S, int &split4S, int &split5S, double &average)// this is function heading { printf("\n kilometer 1 %d" , ":02%d",'split1M','split1S'); printf("\n kilometer 2 %d" , ":02%d",'split2M','split2S'); printf("\n kilometer 3 %d" , ":02%d",'split3M','split3S'); printf("\n kilometer 4 %d" , ":02%d",'split4M','split4S'); printf("\n kilometer 5 %d" , ":02%d",'split5M','split5S'); printf("\n your average pace is ",'average',"per kilometer \n", "William Chen\n"); // this printf so the programmer // can allow the user to see // the results from the data gathered. }

Read the article

Problem Implementing Texture on Libgdx Mesh of Randomized Terrain

- by BrotherJack

I'm having problems understanding how to apply a texture to a non-rectangular object. The following code creates textures such as this: from the debug renderer I think I've got the physical shape of the "earth" correct. However, I don't know how to apply a texture to it. I have a 50x50 pixel image (in the environment constructor as "dirt.png"), that I want to apply to the hills. I have a vague idea that this seems to involve the mesh class and possibly a ShapeRenderer, but the little i'm finding online is just confusing me. Bellow is code from the class that makes and regulates the terrain and the code in a separate file that is supposed to render it (but crashes on the mesh.render() call). Any pointers would be appreciated. public class Environment extends Actor{ Pixmap sky; public Texture groundTexture; Texture skyTexture; double tankypos; //TODO delete, temp public Tank etank; //TODO delete, temp int destructionRes; // how wide is a static pixel private final float viewWidth; private final float viewHeight; private ChainShape terrain; public Texture dirtTexture; private World world; public Mesh terrainMesh; private static final String LOG = Environment.class.getSimpleName(); // Constructor public Environment(Tank tank, FileHandle sfileHandle, float w, float h, int destructionRes) { world = new World(new Vector2(0, -10), true); this.destructionRes = destructionRes; sky = new Pixmap(sfileHandle); viewWidth = w; viewHeight = h; skyTexture = new Texture(sky); terrain = new ChainShape(); genTerrain((int)w, (int)h, 6); Texture tankSprite = new Texture(Gdx.files.internal("TankSpriteBase.png")); Texture turretSprite = new Texture(Gdx.files.internal("TankSpriteTurret.png")); tank = new Tank(0, true, tankSprite, turretSprite); Rectangle tankrect = new Rectangle(300, (int)tankypos, 44, 45); tank.setRect(tankrect); BodyDef terrainDef = new BodyDef(); terrainDef.type = BodyType.StaticBody; terrainDef.position.set(0, 0); Body terrainBody = world.createBody(terrainDef); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = terrain; terrainBody.createFixture(fixtureDef); BodyDef tankDef = new BodyDef(); Rectangle rect = tank.getRect(); tankDef.type = BodyType.DynamicBody; tankDef.position.set(0,0); tankDef.position.x = rect.x; tankDef.position.y = rect.y; Body tankBody = world.createBody(tankDef); FixtureDef tankFixture = new FixtureDef(); PolygonShape shape = new PolygonShape(); shape.setAsBox(rect.width*WORLD_TO_BOX, rect.height*WORLD_TO_BOX); fixtureDef.shape = shape; dirtTexture = new Texture(Gdx.files.internal("dirt.png")); etank = tank; } private void genTerrain(int w, int h, int hillnessFactor){ int width = w; int height = h; Random rand = new Random(); //min and max bracket the freq's of the sin/cos series //The higher the max the hillier the environment int min = 1; //allocating horizon for screen width Vector2[] horizon = new Vector2[width+2]; horizon[0] = new Vector2(0,0); double[] skyline = new double[width]; //TODO skyline necessary as an array? //ratio of amplitude of screen height to landscape variation double r = (int) 2.0/5.0; //number of terms to be used in sine/cosine series int n = 4; int[] f = new int[n*2]; //calculating omegas for sine series for(int i = 0; i < n*2 ; i ++){ f[i] = rand.nextInt(hillnessFactor - min + 1) + min; } //amp is the amplitude of the series int amp = (int) (r*height); double lastPoint = 0.0; for(int i = 0 ; i < width; i ++){ skyline[i] = 0; for(int j = 0; j < n; j++){ skyline[i] += ( Math.sin( (f[j]*Math.PI*i/height) ) + Math.cos(f[j+n]*Math.PI*i/height) ); } skyline[i] *= amp/(n*2); skyline[i] += (height/2); skyline[i] = (int)skyline[i]; //TODO Possible un-necessary float to int to float conversions tankypos = skyline[i]; horizon[i+1] = new Vector2((float)i, (float)skyline[i]); if(i == width) lastPoint = skyline[i]; } horizon[width+1] = new Vector2(800, (float)lastPoint); terrain.createChain(horizon); terrain.createLoop(horizon); //I have no idea if the following does anything useful :( terrainMesh = new Mesh(true, (width+2)*2, (width+2)*2, new VertexAttribute(Usage.Position, (width+2)*2, "a_position")); float[] vertices = new float[(width+2)*2]; short[] indices = new short[(width+2)*2]; for(int i=0; i < (width+2); i+=2){ vertices[i] = horizon[i].x; vertices[i+1] = horizon[i].y; indices[i] = (short)i; indices[i+1] = (short)(i+1); } terrainMesh.setVertices(vertices); terrainMesh.setIndices(indices); } Here is the code that is (supposed to) render the terrain. @Override public void render(float delta) { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); // tell the camera to update its matrices. camera.update(); // tell the SpriteBatch to render in the // coordinate system specified by the camera. backgroundStage.draw(); backgroundStage.act(delta); uistage.draw(); uistage.act(delta); batch.begin(); debugRenderer.render(this.ground.getWorld(), camera.combined); batch.end(); //Gdx.graphics.getGL10().glEnable(GL10.GL_TEXTURE_2D); ground.dirtTexture.bind(); ground.terrainMesh.render(GL10.GL_TRIANGLE_FAN); //I'm particularly lost on this ground.step(); }

Read the article

Windows Azure: Import/Export Hard Drives, VM ACLs, Web Sockets, Remote Debugging, Continuous Delivery, New Relic, Billing Alerts and More

- by ScottGu

Two weeks ago we released a giant set of improvements to Windows Azure, as well as a significant update of the Windows Azure SDK. This morning we released another massive set of enhancements to Windows Azure. Today’s new capabilities include: Storage: Import/Export Hard Disk Drives to your Storage Accounts HDInsight: General Availability of our Hadoop Service in the cloud Virtual Machines: New VM Gallery, ACL support for VIPs Web Sites: WebSocket and Remote Debugging Support Notification Hubs: Segmented customer push notification support with tag expressions TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services Developer Analytics: New Relic support for Web Sites + Mobile Services Service Bus: Support for partitioned queues and topics Billing: New Billing Alert Service that sends emails notifications when your bill hits a threshold you define All of these improvements are now available to use immediately (note that some features are still in preview). Below are more details about them. Storage: Import/Export Hard Disk Drives to Windows Azure I am excited to announce the preview of our new Windows Azure Import/Export Service! The Windows Azure Import/Export Service enables you to move large amounts of on-premises data into and out of your Windows Azure Storage accounts. It does this by enabling you to securely ship hard disk drives directly to our Windows Azure data centers. Once we receive the drives we’ll automatically transfer the data to or from your Windows Azure Storage account. This enables you to import or export massive amounts of data more quickly and cost effectively (and not be constrained by available network bandwidth). Encrypted Transport Our Import/Export service provides built-in support for BitLocker disk encryption – which enables you to securely encrypt data on the hard drives before you send it, and not have to worry about it being compromised even if the disk is lost/stolen in transit (since the content on the transported hard drives is completely encrypted and you are the only one who has the key to it). The drive preparation tool we are shipping today makes setting up bitlocker encryption on these hard drives easy. How to Import/Export your first Hard Drive of Data You can read our Getting Started Guide to learn more about how to begin using the import/export service. You can create import and export jobs via the Windows Azure Management Portal as well as programmatically using our Server Management APIs. It is really easy to create a new import or export job using the Windows Azure Management Portal. Simply navigate to a Windows Azure storage account, and then click the new Import/Export tab now available within it (note: if you don’t have this tab make sure to sign-up for the Import/Export preview): Then click the “Create Import Job” or “Create Export Job” commands at the bottom of it. This will launch a wizard that easily walks you through the steps required: For more comprehensive information about Import/Export, refer to Windows Azure Storage team blog. You can also send questions and comments to the [email protected] email address. We think you’ll find this new service makes it much easier to move data into and out of Windows Azure, and it will dramatically cut down the network bandwidth required when working on large data migration projects. We hope you like it. HDInsight: 100% Compatible Hadoop Service in the Cloud Last week we announced the general availability release of Windows Azure HDInsight. HDInsight is a 100% compatible Hadoop service that allows you to easily provision and manage Hadoop clusters for big data processing in Windows Azure. This release is now live in production, backed by an enterprise SLA, supported 24x7 by Microsoft Support, and is ready to use for production scenarios. HDInsight allows you to use Apache Hadoop tools, such as Pig and Hive, to process large amounts of data in Windows Azure Blob Storage. Because data is stored in Windows Azure Blob Storage, you can choose to dynamically create Hadoop clusters only when you need them, and then shut them down when they are no longer required (since you pay only for the time the Hadoop cluster instances are running this provides a super cost effective way to use them). You can create Hadoop clusters using either the Windows Azure Management Portal (see below) or using our PowerShell and Cross Platform Command line tools: The import/export hard drive support that came out today is a perfect companion service to use with HDInsight – the combination allows you to easily ingest, process and optionally export a limitless amount of data. We’ve also integrated HDInsight with our Business Intelligence tools, so users can leverage familiar tools like Excel in order to analyze the output of jobs. You can find out more about how to get started with HDInsight here. Virtual Machines: VM Gallery Enhancements Today’s update of Windows Azure brings with it a new Virtual Machine gallery that you can use to create new VMs in the cloud. You can launch the gallery by doing New->Compute->Virtual Machine->From Gallery within the Windows Azure Management Portal: The new Virtual Machine Gallery includes some nice enhancements that make it even easier to use: Search: You can now easily search and filter images using the search box in the top-right of the dialog. For example, simply type “SQL” and we’ll filter to show those images in the gallery that contain that substring. Category Tree-view: Each month we add more built-in VM images to the gallery. You can continue to browse these using the “All” view within the VM Gallery – or now quickly filter them using the category tree-view on the left-hand side of the dialog. For example, by selecting “Oracle” in the tree-view you can now quickly filter to see the official Oracle supplied images. MSDN and Supported checkboxes: With today’s update we are also introducing filters that makes it easy to filter out types of images that you may not be interested in. The first checkbox is MSDN: using this filter you can exclude any image that is not part of the Windows Azure benefits for MSDN subscribers (which have highly discounted pricing - you can learn more about the MSDN pricing here). The second checkbox is Supported: this filter will exclude any image that contains prerelease software, so you can feel confident that the software you choose to deploy is fully supported by Windows Azure and our partners. Sort options: We sort gallery images by what we think customers are most interested in, but sometimes you might want to sort using different views. So we’re providing some additional sort options, like “Newest,” to customize the image list for what suits you best. Pricing information: We now provide additional pricing information about images and options on how to cost effectively run them directly within the VM Gallery. The above improvements make it even easier to use the VM Gallery and quickly create launch and run Virtual Machines in the cloud. Virtual Machines: ACL Support for VIPs A few months ago we exposed the ability to configure Access Control Lists (ACLs) for Virtual Machines using Windows PowerShell cmdlets and our Service Management API. With today’s release, you can now configure VM ACLs using the Windows Azure Management Portal as well. You can now do this by clicking the new Manage ACL command in the Endpoints tab of a virtual machine instance: This will enable you to configure an ordered list of permit and deny rules to scope the traffic that can access your VM’s network endpoints. For example, if you were on a virtual network, you could limit RDP access to a Windows Azure virtual machine to only a few computers attached to your enterprise. Or if you weren’t on a virtual network you could alternatively limit traffic from public IPs that can access your workloads: Here is the default behaviors for ACLs in Windows Azure: By default (i.e. no rules specified), all traffic is permitted. When using only Permit rules, all other traffic is denied. When using only Deny rules, all other traffic is permitted. When there is a combination of Permit and Deny rules, all other traffic is denied. Lastly, remember that configuring endpoints does not automatically configure them within the VM if it also has firewall rules enabled at the OS level. So if you create an endpoint using the Windows Azure Management Portal, Windows PowerShell, or REST API, be sure to also configure your guest VM firewall appropriately as well. Web Sites: Web Sockets Support With today’s release you can now use Web Sockets with Windows Azure Web Sites. This feature enables you to easily integrate real-time communication scenarios within your web based applications, and is available at no extra charge (it even works with the free tier). Higher level programming libraries like SignalR and socket.io are also now supported with it. You can enable Web Sockets support on a web site by navigating to the Configure tab of a Web Site, and by toggling Web Sockets support to “on”: Once Web Sockets is enabled you can start to integrate some really cool scenarios into your web applications. Check out the new SignalR documentation hub on www.asp.net to learn more about some of the awesome scenarios you can do with it. Web Sites: Remote Debugging Support The Windows Azure SDK 2.2 we released two weeks ago introduced remote debugging support for Windows Azure Cloud Services. With today’s Windows Azure release we are extending this remote debugging support to also work with Windows Azure Web Sites. With live, remote debugging support inside of Visual Studio, you are able to have more visibility than ever before into how your code is operating live in Windows Azure. It is now super easy to attach the debugger and quickly see what is going on with your application in the cloud. Remote Debugging of a Windows Azure Web Site using VS 2013 Enabling the remote debugging of a Windows Azure Web Site using VS 2013 is really easy. Start by opening up your web application’s project within Visual Studio. Then navigate to the “Server Explorer” tab within Visual Studio, and click on the deployed web-site you want to debug that is running within Windows Azure using the Windows Azure->Web Sites node in the Server Explorer. Then right-click and choose the “Attach Debugger” option on it: When you do this Visual Studio will remotely attach the debugger to the Web Site running within Windows Azure. The debugger will then stop the web site’s execution when it hits any break points that you have set within your web application’s project inside Visual Studio. For example, below I set a breakpoint on the “ViewBag.Message” assignment statement within the HomeController of the standard ASP.NET MVC project template. When I hit refresh on the “About” page of the web site within the browser, the breakpoint was triggered and I am now able to debug the app remotely using Visual Studio: Note above how we can debug variables (including autos/watchlist/etc), as well as use the Immediate and Command Windows. In the debug session above I used the Immediate Window to explore some of the request object state, as well as to dynamically change the ViewBag.Message property. When we click the the “Continue” button (or press F5) the app will continue execution and the Web Site will render the content back to the browser. This makes it super easy to debug web apps remotely. Tips for Better Debugging To get the best experience while debugging, we recommend publishing your site using the Debug configuration within Visual Studio’s Web Publish dialog. This will ensure that debug symbol information is uploaded to the Web Site which will enable a richer debug experience within Visual Studio. You can find this option on the Web Publish dialog on the Settings tab: When you ultimately deploy/run the application in production we recommend using the “Release” configuration setting – the release configuration is memory optimized and will provide the best production performance. To learn more about diagnosing and debugging Windows Azure Web Sites read our new Troubleshooting Windows Azure Web Sites in Visual Studio guide. Notification Hubs: Segmented Push Notification support with tag expressions In August we announced the General Availability of Windows Azure Notification Hubs - a powerful Mobile Push Notifications service that makes it easy to send high volume push notifications with low latency from any mobile app back-end. Notification hubs can be used with any mobile app back-end (including ones built using our Mobile Services capability) and can also be used with back-ends that run in the cloud as well as on-premises. Beginning with the initial release, Notification Hubs allowed developers to send personalized push notifications to both individual users as well as groups of users by interest, by associating their devices with tags representing the logical target of the notification. For example, by registering all devices of customers interested in a favorite MLB team with a corresponding tag, it is possible to broadcast one message to millions of Boston Red Sox fans and another message to millions of St. Louis Cardinals fans with a single API call respectively. New support for using tag expressions to enable advanced customer segmentation With today’s release we are adding support for even more advanced customer targeting. You can now identify customers that you want to send push notifications to by defining rich tag expressions. With tag expressions, you can now not only broadcast notifications to Boston Red Sox fans, but take that segmenting a step farther and reach more granular segments. This opens up a variety of scenarios, for example: Offers based on multiple preferences—e.g. send a game day vegetarian special to users tagged as both a Boston Red Sox fan AND a vegetarian Push content to multiple segments in a single message—e.g. rain delay information only to users who are tagged as either a Boston Red Sox fan OR a St. Louis Cardinal fan Avoid presenting subsets of a segment with irrelevant content—e.g. season ticket availability reminder to users who are tagged as a Boston Red Sox fan but NOT also a season ticket holder To illustrate with code, consider a restaurant chain app that sends an offer related to a Red Sox vs Cardinals game for users in Boston. Devices can be tagged by your app with location tags (e.g. “Loc:Boston”) and interest tags (e.g. “Follows:RedSox”, “Follows:Cardinals”), and then a notification can be sent by your back-end to “(Follows:RedSox || Follows:Cardinals) && Loc:Boston” in order to deliver an offer to all devices in Boston that follow either the RedSox or the Cardinals. This can be done directly in your server backend send logic using the code below: var notification = new WindowsNotification(messagePayload); hub.SendNotificationAsync(notification, "(Follows:RedSox || Follows:Cardinals) && Loc:Boston"); In your expressions you can use all Boolean operators: AND (&&), OR (||), and NOT (!). Some other cool use cases for tag expressions that are now supported include: Social: To “all my group except me” - group:id && !user:id Events: Touchdown event is sent to everybody following either team or any of the players involved in the action: Followteam:A || Followteam:B || followplayer:1 || followplayer:2 … Hours: Send notifications at specific times. E.g. Tag devices with time zone and when it is 12pm in Seattle send to: GMT8 && follows:thaifood Versions and platforms: Send a reminder to people still using your first version for Android - version:1.0 && platform:Android For help on getting started with Notification Hubs, visit the Notification Hub documentation center. Then download the latest NuGet package (or use the Notification Hubs REST APIs directly) to start sending push notifications using tag expressions. They are really powerful and enable a bunch of great new scenarios. TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services With today’s Windows Azure release we are making it really easy to enable continuous delivery support with Windows Azure and Team Foundation Services. Team Foundation Services is a cloud based offering from Microsoft that provides integrated source control (with both TFS and Git support), build server, test execution, collaboration tools, and agile planning support. It makes it really easy to setup a team project (complete with automated builds and test runners) in the cloud, and it has really rich integration with Visual Studio. With today’s Windows Azure release it is now really easy to enable continuous delivery support with both TFS and Git based repositories hosted using Team Foundation Services. This enables a workflow where when code is checked in, built successfully on an automated build server, and all tests pass on it – I can automatically have the app deployed on Windows Azure with zero manual intervention or work required. The below screen-shots demonstrate how to quickly setup a continuous delivery workflow to Windows Azure with a Git-based ASP.NET MVC project hosted using Team Foundation Services. Enabling Continuous Delivery to Windows Azure with Team Foundation Services The project I’m going to enable continuous delivery with is a simple ASP.NET MVC project whose source code I’m hosting using Team Foundation Services. I did this by creating a “SimpleContinuousDeploymentTest” repository there using Git – and then used the new built-in Git tooling support within Visual Studio 2013 to push the source code to it. Below is a screen-shot of the Git repository hosted within Team Foundation Services: I can access the repository within Visual Studio 2013 and easily make commits with it (as well as branch, merge and do other tasks). Using VS 2013 I can also setup automated builds to take place in the cloud using Team Foundation Services every time someone checks in code to the repository: The cool thing about this is that I don’t have to buy or rent my own build server – Team Foundation Services automatically maintains its own build server farm and can automatically queue up a build for me (for free) every time someone checks in code using the above settings. This build server (and automated testing) support now works with both TFS and Git based source control repositories. Connecting a Team Foundation Services project to Windows Azure Once I have a source repository hosted in Team Foundation Services with Automated Builds and Testing set up, I can then go even further and set it up so that it will be automatically deployed to Windows Azure when a source code commit is made to the repository (assuming the Build + Tests pass). Enabling this is now really easy. To set this up with a Windows Azure Web Site simply use the New->Compute->Web Site->Custom Create command inside the Windows Azure Management Portal. This will create a dialog like below. I gave the web site a name and then made sure the “Publish from source control” checkbox was selected: When we click next we’ll be prompted for the location of the source repository. We’ll select “Team Foundation Services”: Once we do this we’ll be prompted for our Team Foundation Services account that our source repository is hosted under (in this case my TFS account is “scottguthrie”): When we click the “Authorize Now” button we’ll be prompted to give Windows Azure permissions to connect to the Team Foundation Services account. Once we do this we’ll be prompted to pick the source repository we want to connect to. Starting with today’s Windows Azure release you can now connect to both TFS and Git based source repositories. This new support allows me to connect to the “SimpleContinuousDeploymentTest” respository we created earlier: Clicking the finish button will then create the Web Site with the continuous delivery hooks setup with Team Foundation Services. Now every time someone pushes source control to the repository in Team Foundation Services, it will kick off an automated build, run all of the unit tests in the solution , and if they pass the app will be automatically deployed to our Web Site in Windows Azure. You can monitor the history and status of these automated deployments using the Deployments tab within the Web Site: This enables a really slick continuous delivery workflow, and enables you to build and deploy apps in a really nice way. Developer Analytics: New Relic support for Web Sites + Mobile Services With today’s Windows Azure release we are making it really easy to enable Developer Analytics and Monitoring support with both Windows Azure Web Site and Windows Azure Mobile Services. We are partnering with New Relic, who provide a great dev analytics and app performance monitoring offering, to enable this - and we have updated the Windows Azure Management Portal to make it really easy to configure. Enabling New Relic with a Windows Azure Web Site Enabling New Relic support with a Windows Azure Web Site is now really easy. Simply navigate to the Configure tab of a Web Site and scroll down to the “developer analytics” section that is now within it: Clicking the “add-on” button will display some additional UI. If you don’t already have a New Relic subscription, you can click the “view windows azure store” button to obtain a subscription (note: New Relic has a perpetually free tier so you can enable it even without paying anything): Clicking the “view windows azure store” button will launch the integrated Windows Azure Store experience we have within the Windows Azure Management Portal. You can use this to browse from a variety of great add-on services – including New Relic: Select “New Relic” within the dialog above, then click the next button, and you’ll be able to choose which type of New Relic subscription you wish to purchase. For this demo we’ll simply select the “Free Standard Version” – which does not cost anything and can be used forever: Once we’ve signed-up for our New Relic subscription and added it to our Windows Azure account, we can go back to the Web Site’s configuration tab and choose to use the New Relic add-on with our Windows Azure Web Site. We can do this by simply selecting it from the “add-on” dropdown (it is automatically populated within it once we have a New Relic subscription in our account): Clicking the “Save” button will then cause the Windows Azure Management Portal to automatically populate all of the needed New Relic configuration settings to our Web Site: Deploying the New Relic Agent as part of a Web Site The final step to enable developer analytics using New Relic is to add the New Relic runtime agent to our web app. We can do this within Visual Studio by right-clicking on our web project and selecting the “Manage NuGet Packages” context menu: This will bring up the NuGet package manager. You can search for “New Relic” within it to find the New Relic agent. Note that there is both a 32-bit and 64-bit edition of it – make sure to install the version that matches how your Web Site is running within Windows Azure (note: you can configure your Web Site to run in either 32-bit or 64-bit mode using the Web Site’s “Configuration” tab within the Windows Azure Management Portal): Once we install the NuGet package we are all set to go. We’ll simply re-publish the web site again to Windows Azure and New Relic will now automatically start monitoring the application Monitoring a Web Site using New Relic Now that the application has developer analytics support with New Relic enabled, we can launch the New Relic monitoring portal to start monitoring the health of it. We can do this by clicking on the “Add Ons” tab in the left-hand side of the Windows Azure Management Portal. Then select the New Relic add-on we signed-up for within it. The Windows Azure Management Portal will provide some default information about the add-on when we do this. Clicking the “Manage” button in the tray at the bottom will launch a new browser tab and single-sign us into the New Relic monitoring portal associated with our account: When we do this a new browser tab will launch with the New Relic admin tool loaded within it: We can now see insights into how our app is performing – without having to have written a single line of monitoring code. The New Relic service provides a ton of great built-in monitoring features allowing us to quickly see: Performance times (including browser rendering speed) for the overall site and individual pages. You can optionally set alert thresholds to trigger if the speed does not meet a threshold you specify. Information about where in the world your customers are hitting the site from (and how performance varies by region) Details on the latency performance of external services your web apps are using (for example: SQL, Storage, Twitter, etc) Error information including call stack details for exceptions that have occurred at runtime SQL Server profiling information – including which queries executed against your database and what their performance was And a whole bunch more… The cool thing about New Relic is that you don’t need to write monitoring code within your application to get all of the above reports (plus a lot more). The New Relic agent automatically enables the CLR profiler within applications and automatically captures the information necessary to identify these. This makes it super easy to get started and immediately have a rich developer analytics view for your solutions with very little effort. If you haven’t tried New Relic out yet with Windows Azure I recommend you do so – I think you’ll find it helps you build even better cloud applications. Following the above steps will help you get started and deliver you a really good application monitoring solution in only minutes. Service Bus: Support for partitioned queues and topics With today’s release, we are enabling support within Service Bus for partitioned queues and topics. Enabling partitioning enables you to achieve a higher message throughput and better availability from your queues and topics. Higher message throughput is achieved by implementing multiple message brokers for each partitioned queue and topic. The multiple messaging stores will also provide higher availability. You can create a partitioned queue or topic by simply checking the Enable Partitioning option in the custom create wizard for a Queue or Topic: Read this article to learn more about partitioned queues and topics and how to take advantage of them today. Billing: New Billing Alert Service Today’s Windows Azure update enables a new Billing Alert Service Preview that enables you to get proactive email notifications when your Windows Azure bill goes above a certain monetary threshold that you configure. This makes it easier to manage your bill and avoid potential surprises at the end of the month. With the Billing Alert Service Preview, you can now create email alerts to monitor and manage your monetary credits or your current bill total. To set up an alert first sign-up for the free Billing Alert Service Preview. Then visit the account management page, click on a subscription you have setup, and then navigate to the new Alerts tab that is available: The alerts tab allows you to setup email alerts that will be sent automatically once a certain threshold is hit. For example, by clicking the “add alert” button above I can setup a rule to send myself email anytime my Windows Azure bill goes above $100 for the month: The Billing Alert Service will evolve to support additional aspects of your bill as well as support multiple forms of alerts such as SMS. Try out the new Billing Alert Service Preview today and give us feedback. Summary Today’s Windows Azure release enables a ton of great new scenarios, and makes building applications hosted in the cloud even easier. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Issues with signal handling [closed]

- by user34790

I am trying to actually study the signal handling behavior in multiprocess system. I have a system where there are three signal generating processes generating signals of type SIGUSR1 and SIGUSR1. I have two handler processes that handle a particular type of signal. I have another monitoring process that also receives the signals and then does its work. I have a certain issue. Whenever my signal handling processes generate a signal of a particular type, it is sent to the process group so it is received by the signal handling processes as well as the monitoring processes. Whenever the signal handlers of monitoring and signal handling processes are called, I have printed to indicate the signal handling. I was expecting a uniform series of calls for the signal handlers of the monitoring and handling processes. However, looking at the output I could see like at the beginning the monitoring and signal handling processes's signal handlers are called uniformly. However, after I could see like signal handler processes handlers being called in a burst followed by the signal handler of monitoring process being called in a burst. Here is my code and output #include <iostream> #include <sys/types.h> #include <sys/wait.h> #include <sys/time.h> #include <signal.h> #include <cstdio> #include <stdlib.h> #include <sys/ipc.h> #include <sys/shm.h> #define NUM_SENDER_PROCESSES 3 #define NUM_HANDLER_PROCESSES 4 #define NUM_SIGNAL_REPORT 10 #define MAX_SIGNAL_COUNT 100000 using namespace std; volatile int *usrsig1_handler_count; volatile int *usrsig2_handler_count; volatile int *usrsig1_sender_count; volatile int *usrsig2_sender_count; volatile int *lock_1; volatile int *lock_2; volatile int *lock_3; volatile int *lock_4; volatile int *lock_5; volatile int *lock_6; //Used only by the monitoring process volatile int monitor_count; volatile int usrsig1_monitor_count; volatile int usrsig2_monitor_count; double time_1[NUM_SIGNAL_REPORT]; double time_2[NUM_SIGNAL_REPORT]; //Used only by the main process int total_signal_count; //For shared memory int shmid; const int shareSize = sizeof(int) * (10); double timestamp() { struct timeval tp; gettimeofday(&tp, NULL); return (double)tp.tv_sec + tp.tv_usec / 1000000.; } pid_t senders[NUM_SENDER_PROCESSES]; pid_t handlers[NUM_HANDLER_PROCESSES]; pid_t reporter; void signal_catcher_1(int); void signal_catcher_2(int); void signal_catcher_int(int); void signal_catcher_monitor(int); void signal_catcher_main(int); void terminate_processes() { //Kill the child processes int status; cout << "Time up terminating the child processes" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); //Wait for the child processes to finish for(int i=0; i<NUM_SENDER_PROCESSES; i++) { waitpid(senders[i], &status, 0); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { waitpid(handlers[i], &status, 0); } waitpid(reporter, &status, 0); } int main(int argc, char *argv[]) { if(argc != 2) { cout << "Required parameters missing. " << endl; cout << "Option 1 = 1 which means run for 30 seconds" << endl; cout << "Option 2 = 2 which means run until 100000 signals" << endl; exit(0); } int option = atoi(argv[1]); pid_t pid; if(option == 2) { if(signal(SIGUSR1, signal_catcher_main) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, signal_catcher_main) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } if(signal(SIGINT, signal_catcher_int) == SIG_ERR) { perror("3"); exit(1); } /////////////////////////////////////////////////////////////////////////////////////// ////////////////////// Initializing the shared memory ///////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////// cout << "Initializing the shared memory" << endl; if ((shmid=shmget(IPC_PRIVATE,shareSize,IPC_CREAT|0660))< 0) { perror("shmget fail"); exit(1); } usrsig1_handler_count = (int *) shmat(shmid, NULL, 0); usrsig2_handler_count = usrsig1_handler_count + 1; usrsig1_sender_count = usrsig2_handler_count + 1; usrsig2_sender_count = usrsig1_sender_count + 1; lock_1 = usrsig2_sender_count + 1; lock_2 = lock_1 + 1; lock_3 = lock_2 + 1; lock_4 = lock_3 + 1; lock_5 = lock_4 + 1; lock_6 = lock_5 + 1; //Initialize them to be zero *usrsig1_handler_count = 0; *usrsig2_handler_count = 0; *usrsig1_sender_count = 0; *usrsig2_sender_count = 0; *lock_1 = 0; *lock_2 = 0; *lock_3 = 0; *lock_4 = 0; *lock_5 = 0; *lock_6 = 0; cout << "End of initializing the shared memory" << endl; ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////// End of initializing the shared memory /////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////Registering the signal handlers/////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal handlers" << endl; for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { if((pid = fork()) == 0) { if(i%2 == 0) { struct sigaction action; action.sa_handler = signal_catcher_1; sigset_t block_mask; action.sa_flags = 0; sigaction(SIGUSR1,&action,NULL); if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1 ,SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } struct sigaction action; action.sa_handler = signal_catcher_2; action.sa_flags = 0; sigaction(SIGUSR2,&action,NULL); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { //cout << "Registerd the handler " << pid << endl; handlers[i] = pid; } } cout << "End of registering the signal handlers" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////End of registering the signal handlers ////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// ///////////////////////////Registering the monitoring process ////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the monitoring process" << endl; if((pid = fork()) == 0) { struct sigaction action; action.sa_handler = signal_catcher_monitor; sigemptyset(&action.sa_mask); sigset_t block_mask; sigemptyset(&block_mask); sigaddset(&block_mask,SIGUSR1); sigaddset(&block_mask,SIGUSR2); action.sa_flags = 0; action.sa_mask = block_mask; sigaction(SIGUSR1,&action,NULL); sigaction(SIGUSR2,&action,NULL); if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { cout << "Monitor's pid is " << pid << endl; reporter = pid; } cout << "End of registering the monitoring process" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////End of registering the monitoring process//////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Sleep to make sure that the monitor and handler processes are well initialized and ready to handle signals sleep(5); ////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////Registering the signal generators/////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal generators" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { if((pid = fork()) == 0) { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } srand(i); while(true) { int signal_id = rand()%2 + 1; if(signal_id == 1) { killpg(getpgid(getpid()), SIGUSR1); while(__sync_lock_test_and_set(lock_4,1) != 0) { } (*usrsig1_sender_count)++; *lock_4 = 0; } else { killpg(getpgid(getpid()), SIGUSR2); while(__sync_lock_test_and_set(lock_5,1) != 0) { } (*usrsig2_sender_count)++; *lock_5=0; } int r = rand()%10 + 1; double s = (double)r/100; sleep(s); } exit(0); } else { //cout << "Registered the sender " << pid << endl; senders[i] = pid; } } //cout << "End of registering the signal generators" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////End of registering the signal generators/////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Either sleep for 30 seconds and terminate the program or if the number of signals generated reaches 10000, terminate the program if(option = 1) { sleep(90); terminate_processes(); } else { while(true) { if(total_signal_count >= MAX_SIGNAL_COUNT) { terminate_processes(); } else { sleep(0.001); } } } } void signal_catcher_1(int the_sig) { while(__sync_lock_test_and_set(lock_1,1) != 0) { } (*usrsig1_handler_count) = (*usrsig1_handler_count) + 1; cout << "Signal Handler 1 " << *usrsig1_handler_count << endl; __sync_lock_release(lock_1); } void signal_catcher_2(int the_sig) { while(__sync_lock_test_and_set(lock_2,1) != 0) { } (*usrsig2_handler_count) = (*usrsig2_handler_count) + 1; __sync_lock_release(lock_2); } void signal_catcher_main(int the_sig) { while(__sync_lock_test_and_set(lock_6,1) != 0) { } total_signal_count++; *lock_6 = 0; } void signal_catcher_int(int the_sig) { for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); exit(3); } void signal_catcher_monitor(int the_sig) { cout << "Monitoring process " << *usrsig1_handler_count << endl; } Here is the initial segment of output Monitoring process 0 Monitoring process 0 Monitoring process 0 Monitoring process 0 Signal Handler 1 1 Monitoring process 2 Signal Handler 1 2 Signal Handler 1 3 Signal Handler 1 4 Monitoring process 4 Monitoring process Signal Handler 1 6 Signal Handler 1 7 Monitoring process 7 Monitoring process 8 Monitoring process 8 Signal Handler 1 9 Monitoring process 9 Monitoring process 9 Monitoring process 10 Signal Handler 1 11 Monitoring process 11 Monitoring process 12 Signal Handler 1 13 Signal Handler 1 14 Signal Handler 1 15 Signal Handler 1 16 Signal Handler 1 17 Signal Handler 1 18 Monitoring process 19 Signal Handler 1 20 Monitoring process 20 Signal Handler 1 21 Monitoring process 21 Monitoring process 21 Monitoring process 22 Monitoring process 22 Monitoring process 23 Signal Handler 1 24 Signal Handler 1 25 Monitoring process 25 Signal Handler 1 27 Signal Handler 1 28 Signal Handler 1 29 Here is the segment when the signal handler processes signal handlers are called in a burst Signal Handler 1 456 Signal Handler 1 457 Signal Handler 1 458 Signal Handler 1 459 Signal Handler 1 460 Signal Handler 1 461 Signal Handler 1 462 Signal Handler 1 463 Signal Handler 1 464 Signal Handler 1 465 Signal Handler 1 466 Signal Handler 1 467 Signal Handler 1 468 Signal Handler 1 469 Signal Handler 1 470 Signal Handler 1 471 Signal Handler 1 472 Signal Handler 1 473 Signal Handler 1 474 Signal Handler 1 475 Signal Handler 1 476 Signal Handler 1 477 Signal Handler 1 478 Signal Handler 1 479 Signal Handler 1 480 Signal Handler 1 481 Signal Handler 1 482 Signal Handler 1 483 Signal Handler 1 484 Signal Handler 1 485 Signal Handler 1 486 Signal Handler 1 487 Signal Handler 1 488 Signal Handler 1 489 Signal Handler 1 490 Signal Handler 1 491 Signal Handler 1 492 Signal Handler 1 493 Signal Handler 1 494 Signal Handler 1 495 Signal Handler 1 496 Signal Handler 1 497 Signal Handler 1 498 Signal Handler 1 499 Signal Handler 1 500 Signal Handler 1 501 Signal Handler 1 502 Signal Handler 1 503 Signal Handler 1 504 Signal Handler 1 505 Signal Handler 1 506 Here is the segment when the monitoring processes signal handlers are called in a burst Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Why isn't it uniform afterwards. Why are they called in a burst?

Read the article

C#/.NET Little Wonders: Interlocked CompareExchange()

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Two posts ago, I discussed the Interlocked Add(), Increment(), and Decrement() methods (here) for adding and subtracting values in a thread-safe, lightweight manner. Then, last post I talked about the Interlocked Read() and Exchange() methods (here) for safely and efficiently reading and setting 32 or 64 bit values (or references). This week, we’ll round out the discussion by talking about the Interlocked CompareExchange() method and how it can be put to use to exchange a value if the current value is what you expected it to be. Dirty reads can lead to bad results Many of the uses of Interlocked that we’ve explored so far have centered around either reading, setting, or adding values. But what happens if you want to do something more complex such as setting a value based on the previous value in some manner? Perhaps you were creating an application that reads a current balance, applies a deposit, and then saves the new modified balance, where of course you’d want that to happen atomically. If you read the balance, then go to save the new balance and between that time the previous balance has already changed, you’ll have an issue! Think about it, if we read the current balance as $400, and we are applying a new deposit of $50.75, but meanwhile someone else deposits $200 and sets the total to $600, but then we write a total of $450.75 we’ve lost $200! Now, certainly for int and long values we can use Interlocked.Add() to handles these cases, and it works well for that. But what if we want to work with doubles, for example? Let’s say we wanted to add the numbers from 0 to 99,999 in parallel. We could do this by spawning several parallel tasks to continuously add to a total: 1: double total = 0; 2: 3: Parallel.For(0, 10000, next => 4: { 5: total += next; 6: }); Were this run on one thread using a standard for loop, we’d expect an answer of 4,999,950,000 (the sum of all numbers from 0 to 99,999). But when we run this in parallel as written above, we’ll likely get something far off. The result of one of my runs, for example, was 1,281,880,740. That is way off! If this were banking software we’d be in big trouble with our clients. So what happened? The += operator is not atomic, it will read in the current value, add the result, then store it back into the total. At any point in all of this another thread could read a “dirty” current total and accidentally “skip” our add. So, to clean this up, we could use a lock to guarantee concurrency: 1: double total = 0.0; 2: object locker = new object(); 3: 4: Parallel.For(0, count, next => 5: { 6: lock (locker) 7: { 8: total += next; 9: } 10: }); Which will give us the correct result of 4,999,950,000. One thing to note is that locking can be heavy, especially if the operation being locked over is trivial, or the life of the lock is a high percentage of the work being performed concurrently. In the case above, the lock consumes pretty much all of the time of each parallel task – and the task being locked on is relatively trivial. Now, let me put in a disclaimer here before we go further: For most uses, lock is more than sufficient for your needs, and is often the simplest solution! So, if lock is sufficient for most needs, why would we ever consider another solution? The problem with locking is that it can suspend execution of your thread while it waits for the signal that the lock is free. Moreover, if the operation being locked over is trivial, the lock can add a very high level of overhead. This is why things like Interlocked.Increment() perform so well, instead of locking just to perform an increment, we perform the increment with an atomic, lockless method. As with all things performance related, it’s important to profile before jumping to the conclusion that you should optimize everything in your path. If your profiling shows that locking is causing a high level of waiting in your application, then it’s time to consider lighter alternatives such as Interlocked. CompareExchange() – Exchange existing value if equal some value So let’s look at how we could use CompareExchange() to solve our problem above. The general syntax of CompareExchange() is: T CompareExchange<T>(ref T location, T newValue, T expectedValue) If the value in location == expectedValue, then newValue is exchanged. Either way, the value in location (before exchange) is returned. Actually, CompareExchange() is not one method, but a family of overloaded methods that can take int, long, float, double, pointers, or references. It cannot take other value types (that is, can’t CompareExchange() two DateTime instances directly). Also keep in mind that the version that takes any reference type (the generic overload) only checks for reference equality, it does not call any overridden Equals(). So how does this help us? Well, we can grab the current total, and exchange the new value if total hasn’t changed. This would look like this: 1: // grab the snapshot 2: double current = total; 3: 4: // if the total hasn’t changed since I grabbed the snapshot, then 5: // set it to the new total 6: Interlocked.CompareExchange(ref total, current + next, current); So what the code above says is: if the amount in total (1st arg) is the same as the amount in current (3rd arg), then set total to current + next (2nd arg). This check and exchange pair is atomic (and thus thread-safe). This works if total is the same as our snapshot in current, but the problem, is what happens if they aren’t the same? Well, we know that in either case we will get the previous value of total (before the exchange), back as a result. Thus, we can test this against our snapshot to see if it was the value we expected: 1: // if the value returned is != current, then our snapshot must be out of date 2: // which means we didn't (and shouldn't) apply current + next 3: if (Interlocked.CompareExchange(ref total, current + next, current) != current) 4: { 5: // ooops, total was not equal to our snapshot in current, what should we do??? 6: } So what do we do if we fail? That’s up to you and the problem you are trying to solve. It’s possible you would decide to abort the whole transaction, or perhaps do a lightweight spin and try again. Let’s try that: 1: double current = total; 2: 3: // make first attempt... 4: if (Interlocked.CompareExchange(ref total, current + i, current) != current) 5: { 6: // if we fail, go into a spin wait, spin, and try again until succeed 7: var spinner = new SpinWait(); 8: 9: do 10: { 11: spinner.SpinOnce(); 12: current = total; 13: } 14: while (Interlocked.CompareExchange(ref total, current + i, current) != current); 15: } 16: This is not trivial code, but it illustrates a possible use of CompareExchange(). What we are doing is first checking to see if we succeed on the first try, and if so great! If not, we create a SpinWait and then repeat the process of SpinOnce(), grab a fresh snapshot, and repeat until CompareExchnage() succeeds. You may wonder why not a simple do-while here, and the reason it’s more efficient to only create the SpinWait until we absolutely know we need one, for optimal efficiency. Though not as simple (or maintainable) as a simple lock, this will perform better in many situations. Comparing an unlocked (and wrong) version, a version using lock, and the Interlocked of the code, we get the following average times for multiple iterations of adding the sum of 100,000 numbers: 1: Unlocked money average time: 2.1 ms 2: Locked money average time: 5.1 ms 3: Interlocked money average time: 3 ms So the Interlocked.CompareExchange(), while heavier to code, came in lighter than the lock, offering a good compromise of safety and performance when we need to reduce contention. CompareExchange() - it’s not just for adding stuff… So that was one simple use of CompareExchange() in the context of adding double values -- which meant we couldn’t have used the simpler Interlocked.Add() -- but it has other uses as well. If you think about it, this really works anytime you want to create something new based on a current value without using a full lock. For example, you could use it to create a simple lazy instantiation implementation. In this case, we want to set the lazy instance only if the previous value was null: 1: public static class Lazy<T> where T : class, new() 2: { 3: private static T _instance; 4: 5: public static T Instance 6: { 7: get 8: { 9: // if current is null, we need to create new instance 10: if (_instance == null) 11: { 12: // attempt create, it will only set if previous was null 13: Interlocked.CompareExchange(ref _instance, new T(), (T)null); 14: } 15: 16: return _instance; 17: } 18: } 19: } So, if _instance == null, this will create a new T() and attempt to exchange it with _instance. If _instance is not null, then it does nothing and we discard the new T() we created. This is a way to create lazy instances of a type where we are more concerned about locking overhead than creating an accidental duplicate which is not used. In fact, the BCL implementation of Lazy<T> offers a similar thread-safety choice for Publication thread safety, where it will not guarantee only one instance was created, but it will guarantee that all readers get the same instance. Another possible use would be in concurrent collections. Let’s say, for example, that you are creating your own brand new super stack that uses a linked list paradigm and is “lock free”. We could use Interlocked.CompareExchange() to be able to do a lockless Push() which could be more efficient in multi-threaded applications where several threads are pushing and popping on the stack concurrently. Yes, there are already concurrent collections in the BCL (in .NET 4.0 as part of the TPL), but it’s a fun exercise! So let’s assume we have a node like this: 1: public sealed class Node<T> 2: { 3: // the data for this node 4: public T Data { get; set; } 5: 6: // the link to the next instance 7: internal Node<T> Next { get; set; } 8: } Then, perhaps, our stack’s Push() operation might look something like: 1: public sealed class SuperStack<T> 2: { 3: private volatile T _head; 4: 5: public void Push(T value) 6: { 7: var newNode = new Node<int> { Data = value, Next = _head }; 8: 9: if (Interlocked.CompareExchange(ref _head, newNode, newNode.Next) != newNode.Next) 10: { 11: var spinner = new SpinWait(); 12: 13: do 14: { 15: spinner.SpinOnce(); 16: newNode.Next = _head; 17: } 18: while (Interlocked.CompareExchange(ref _head, newNode, newNode.Next) != newNode.Next); 19: } 20: } 21: 22: // ... 23: } Notice a similar paradigm here as with adding our doubles before. What we are doing is creating the new Node with the data to push, and with a Next value being the original node referenced by _head. This will create our stack behavior (LIFO – Last In, First Out). Now, we have to set _head to now refer to the newNode, but we must first make sure it hasn’t changed! So we check to see if _head has the same value we saved in our snapshot as newNode.Next, and if so, we set _head to newNode. This is all done atomically, and the result is _head’s original value, as long as the original value was what we assumed it was with newNode.Next, then we are good and we set it without a lock! If not, we SpinWait and try again. Once again, this is much lighter than locking in highly parallelized code with lots of contention. If I compare the method above with a similar class using lock, I get the following results for pushing 100,000 items: 1: Locked SuperStack average time: 6 ms 2: Interlocked SuperStack average time: 4.5 ms So, once again, we can get more efficient than a lock, though there is the cost of added code complexity. Fortunately for you, most of the concurrent collection you’d ever need are already created for you in the System.Collections.Concurrent (here) namespace – for more information, see my Little Wonders – The Concurent Collections Part 1 (here), Part 2 (here), and Part 3 (here). Summary We’ve seen before how the Interlocked class can be used to safely and efficiently add, increment, decrement, read, and exchange values in a multi-threaded environment. In addition to these, Interlocked CompareExchange() can be used to perform more complex logic without the need of a lock when lock contention is a concern. The added efficiency, though, comes at the cost of more complex code. As such, the standard lock is often sufficient for most thread-safety needs. But if profiling indicates you spend a lot of time waiting for locks, or if you just need a lock for something simple such as an increment, decrement, read, exchange, etc., then consider using the Interlocked class’s methods to reduce wait. Technorati Tags: C#,CSharp,.NET,Little Wonders,Interlocked,CompareExchange,threading,concurrency

Read the article

Adding Polynomials (Linked Lists)......Bug Help

- by Brian

I have written a program that creates nodes that in this class are parts of polynomials and then the two polynomials get added together to become one polynomial (list of nodes). All my code compiles so the only problem I am having is that the nodes are not inserting into the polynomial via the insert method I have in polynomial.java and when running the program it does create nodes and displays them in the 2x^2 format but when it comes to add the polynomials together it displays o as the polynomials, so if anyone can figure out whats wrong and what I can do to fix it it would be much appreciated. Here is the code: import java.util.Scanner; class Polynomial{ public termNode head; public Polynomial() { head = null; } public boolean isEmpty() { return (head == null); } public void display() { if (head == null) System.out.print("0"); else for(termNode cur = head; cur != null; cur = cur.getNext()) { System.out.println(cur); } } public void insert(termNode newNode) { termNode prev = null; termNode cur = head; while (cur!=null && (newNode.compareTo(cur)<0)) { prev = null; cur = cur.getNext(); } if (prev == null) { newNode.setNext(head); head = newNode; } else { newNode.setNext(cur); prev.setNext(newNode); } } public void readPolynomial(Scanner kb) { boolean done = false; double coefficient; int exponent; termNode term; head = null; //UNLINK ANY PREVIOUS POLYNOMIAL System.out.println("Enter 0 and 0 to end."); System.out.print("coefficient: "); coefficient = kb.nextDouble(); System.out.println(coefficient); System.out.print("exponent: "); exponent = kb.nextInt(); System.out.println(exponent); done = (coefficient == 0 && exponent == 0); while(!done) { Polynomial poly = new Polynomial(); term = new termNode(coefficient,exponent); System.out.println(term); poly.insert(term); System.out.println("Enter 0 and 0 to end."); System.out.print("coefficient: "); coefficient = kb.nextDouble(); System.out.println(coefficient); System.out.print("exponent: "); exponent = kb.nextInt(); System.out.println(exponent); done = (coefficient==0 && exponent==0); } } public static Polynomial add(Polynomial p, Polynomial q) { Polynomial r = new Polynomial(); double coefficient; int exponent; termNode first = p.head; termNode second = q.head; termNode sum = r.head; termNode term; while (first != null && second != null) { if (first.getExp() == second.getExp()) { if (first.getCoeff() != 0 && second.getCoeff() != 0); { double addCoeff = first.getCoeff() + second.getCoeff(); term = new termNode(addCoeff,first.getExp()); sum.setNext(term); first.getNext(); second.getNext(); } } else if (first.getExp() < second.getExp()) { sum.setNext(second); term = new termNode(second.getCoeff(),second.getExp()); sum.setNext(term); second.getNext(); } else { sum.setNext(first); term = new termNode(first.getNext()); sum.setNext(term); first.getNext(); } } while (first != null) { sum.setNext(first); } while (second != null) { sum.setNext(second); } return r; } } Here is my Node class: class termNode implements Comparable { private int exp; private double coeff; private termNode next; public termNode(double coefficient, int exponent) { coeff = coefficient; exp = exponent; next = null; } public termNode(termNode inTermNode) { coeff = inTermNode.coeff; exp = inTermNode.exp; } public void setData(double coefficient, int exponent) { coefficient = coeff; exponent = exp; } public double getCoeff() { return coeff; } public int getExp() { return exp; } public void setNext(termNode link) { next = link; } public termNode getNext() { return next; } public String toString() { if (exp == 0) { return(coeff + " "); } else if (exp == 1) { return(coeff + "x"); } else { return(coeff + "x^" + exp); } } public int compareTo(Object other) { if(exp ==((termNode) other).exp) return 0; else if(exp < ((termNode) other).exp) return -1; else return 1; } } And here is my Test class to run the program. import java.util.Scanner; class PolyTest{ public static void main(String [] args) { Scanner kb = new Scanner(System.in); Polynomial r; Polynomial p = new Polynomial(); System.out.println("Enter first polynomial."); p.readPolynomial(kb); Polynomial q = new Polynomial(); System.out.println(); System.out.println("Enter second polynomial."); q.readPolynomial(kb); r = Polynomial.add(p,q); System.out.println(); System.out.print("The sum of "); p.display(); System.out.print(" and "); q.display(); System.out.print(" is "); r.display(); } }

Read the article

Unexpected ArrayIndexOutOfBoundsException in JavaFX application, refering to no array

- by Eugene

I have the following code: public void setContent(Importer3D importer) { if (DEBUG) { System.out.println("Initialization of Mesh's arrays"); } coords = importer.getCoords(); texCoords = importer.getTexCoords(); faces = importer.getFaces(); if (DEBUG) { System.out.println("Applying Mesh's arrays"); } mesh = new TriangleMesh(); mesh.getPoints().setAll(coords); mesh.getTexCoords().setAll(texCoords); mesh.getFaces().setAll(faces); if (DEBUG) { System.out.println("Initialization of the material"); } initMaterial(); if (DEBUG) { System.out.println("Setting the MeshView"); } meshView.setMesh(mesh); meshView.setMaterial(material); meshView.setDrawMode(DrawMode.FILL); if (DEBUG) { System.out.println("Adding to 3D scene"); } root3d.getChildren().clear(); root3d.getChildren().add(meshView); if (DEBUG) { System.out.println("3D model is ready!"); } } The Imporeter3D class part: private void load(File file) { stlLoader = new STLLoader(file); } public float[] getCoords() { return stlLoader.getCoords(); } public float[] getTexCoords() { return stlLoader.getTexCoords(); } public int[] getFaces() { return stlLoader.getFaces(); } The STLLoader: public class STLLoader{ public STLLoader(File file) { stlFile = new STLFile(file); loadManager = stlFile.loadManager; pointsArray = new PointsArray(stlFile); texCoordsArray = new TexCoordsArray(); } public float[] getCoords() { return pointsArray.getPoints(); } public float[] getTexCoords() { return texCoordsArray.getTexCoords(); } public int[] getFaces() { return pointsArray.getFaces(); } private STLFile stlFile; private PointsArray pointsArray; private TexCoordsArray texCoordsArray; private FacesArray facesArray; public SimpleBooleanProperty finished = new SimpleBooleanProperty(false); public LoadManager loadManager;} PointsArray file: public class PointsArray { public PointsArray(STLFile stlFile) { this.stlFile = stlFile; initPoints(); } private void initPoints() { ArrayList<Double> pointsList = stlFile.getPoints(); ArrayList<Double> uPointsList = new ArrayList<>(); faces = new int[pointsList.size()*2]; int n = 0; for (Double d : pointsList) { if (uPointsList.indexOf(d) == -1) { uPointsList.add(d); } faces[n] = uPointsList.indexOf(d); faces[++n] = 0; n++; } int i = 0; points = new float[uPointsList.size()]; for (Double d : uPointsList) { points[i] = d.floatValue(); i++; } } public float[] getPoints() { return points; } public int[] getFaces() { return faces; } private float[] points; private int[] faces; private STLFile stlFile; public static boolean DEBUG = true; } And STLFile: ArrayList<Double> coords = new ArrayList<>(); double temp; private void readV(STLParser parser) { for (int n = 0; n < 3; n++) { if(!(parser.ttype==STLParser.TT_WORD && parser.sval.equals("vertex"))) { System.err.println("Format Error:expecting 'vertex' on line " + parser.lineno()); } else { if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.println("Vertex:"); System.out.print("X=" + temp + " "); } if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.print("Y=" + temp + " "); } if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.println("Z=" + temp + " "); } readEOL(parser); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } if (n < 2) { try { parser.nextToken(); } catch (IOException e) { System.err.println("IO Error on line " + parser.lineno() + ": " + e.getMessage()); } } } } public ArrayList<Double> getPoints() { return coords; } As a result of all of this code, I expected to get 3d model in MeshView. But the present result is very strange: everything works and in DEBUG mode I get 3d model is ready! from setContent(), and then unexpected ArrayIndexOutOfBoundsException: File readed Initialization of Mesh's arrays Applying Mesh's arrays Initialization of the material Setting the MeshView Adding to 3D scene 3D model is ready! java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 32252 at com.sun.javafx.collections.ObservableFloatArrayImpl.rangeCheck(ObservableFloatArrayImpl.java:276) at com.sun.javafx.collections.ObservableFloatArrayImpl.get(ObservableFloatArrayImpl.java:184) at javafx.scene.shape.TriangleMesh.computeBounds(TriangleMesh.java:262) at javafx.scene.shape.MeshView.impl_computeGeomBounds(MeshView.java:151) at javafx.scene.Node.updateGeomBounds(Node.java:3497) at javafx.scene.Node.getGeomBounds(Node.java:3450) at javafx.scene.Node.getLocalBounds(Node.java:3432) at javafx.scene.Node.updateTxBounds(Node.java:3510) at javafx.scene.Node.getTransformedBounds(Node.java:3350) at javafx.scene.Node.updateBounds(Node.java:516) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.SubScene.updateBounds(SubScene.java:556) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Scene$ScenePulseListener.pulse(Scene.java:2309) at com.sun.javafx.tk.Toolkit.firePulse(Toolkit.java:329) at com.sun.javafx.tk.quantum.QuantumToolkit.pulse(QuantumToolkit.java:479) at com.sun.javafx.tk.quantum.QuantumToolkit.pulse(QuantumToolkit.java:459) at com.sun.javafx.tk.quantum.QuantumToolkit$13.run(QuantumToolkit.java:326) at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:95) at com.sun.glass.ui.win.WinApplication._runLoop(Native Method) at com.sun.glass.ui.win.WinApplication.access$300(WinApplication.java:39) at com.sun.glass.ui.win.WinApplication$3$1.run(WinApplication.java:101) at java.lang.Thread.run(Thread.java:724) Exception in thread "JavaFX Application Thread" java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 32252 at com.sun.javafx.collections.ObservableFloatArrayImpl.rangeCheck(ObservableFloatArrayImpl.java:276) at com.sun.javafx.collections.ObservableFloatArrayImpl.get(ObservableFloatArrayImpl.java:184) The stranger thing is that this stack doesn't stop until I close the program. And moreover it doesn't point to any my array. What is this? And why does it happen?

Read the article

Incorrect output on changing sequence of declarations

- by max

Writing C++ code to implement Sutherland-Hodgeman polygon clipping. This order of declaration of these 2 statements gives correct output, reverse does not. int numberOfVertices = 5; Point pointList[] = { {50,50}, {200,300}, {310,110}, {130,90}, {70,40} }; I am passing the polygon vertex set to clippers in order - LEFT, RIGHT, TOP, BOTTOM. The exact error which comes when the declarations are reversed is that the bottom clipper, produces an empty set of vertices so no polygon is displayed after clipping. Correct: Incorrent: Confirmed by outputting the number of vertices produced after each pass: Correct: Incorrect: What is the reason for this error? Code: #include <iostream> #include <GL/glut.h> #define MAXVERTICES 10 #define LEFT 0 #define RIGHT 1 #define TOP 2 #define BOTTOM 3 using namespace std; /* Clipping window */ struct Window { double xmin; double xmax; double ymin; double ymax; }; struct Point { double x; double y; }; /* If I interchange these two lines, the code doesn't work. */ /**************/ int numberOfVertices = 5; Point pointList[] = { {50,50}, {200,300}, {310,110}, {130,90}, {70,40} }; /**************/ const Window w = { 100, 400, 60, 200 }; /* Checks whether a point is inside or outside a window side */ int isInside(Point p, int side) { switch(side) { case LEFT: return p.x >= w.xmin; case RIGHT: return p.x <= w.xmax; case TOP: return p.y <= w.ymax; case BOTTOM: return p.y >= w.ymin; } } /* Calculates intersection of a segment and a window side */ Point intersection(Point p1, Point p2, int side) { Point temp; double slope, intercept; bool infinite; /* Find slope and intercept of segment, taking care of inf slope */ if(p2.x - p1.x != 0) { slope = (p2.y - p1.y) / (p2.x - p1.x); infinite = false; } else { infinite = true; } intercept = p1.y - p1.x * slope; /* Calculate intersections */ switch(side) { case LEFT: temp.x = w.xmin; temp.y = temp.x * slope + intercept; break; case RIGHT: temp.x = w.xmax; temp.y = temp.x * slope + intercept; break; case TOP: temp.y = w.ymax; temp.x = infinite ? p1.x : (temp.y - intercept) / slope; break; case BOTTOM: temp.y = w.ymin; temp.x = infinite ? p1.x : (temp.y - intercept) / slope; break; } return temp; } /* Clips polygon against a side, updating the point list (called once for each side) */ void clipAgainstSide(int sideToClip) { int i, j=0; Point s,p; Point outputList[MAXVERTICES]; /* Main algorithm */ s = pointList[numberOfVertices-1]; for(i=0 ; i<numberOfVertices ; i++) { p = pointList[i]; if(isInside(p, sideToClip)) { /* p inside */ if(!isInside(s, sideToClip)) { /* p inside, s outside */ outputList[j] = intersection(p, s, sideToClip); j++; } outputList[j] = p; j++; } else if(isInside(s, sideToClip)) { /* s inside, p outside */ outputList[j] = intersection(s, p, sideToClip); j++; } s = p; } /* Updating number of points and point list */ numberOfVertices = j; /* ERROR: In last call with BOTTOM argument, numberOfVertices becomes 0 */ /* all earlier 3 calls have correct output */ cout<<numberOfVertices<<endl; for(i=0 ; i<numberOfVertices ; i++) { pointList[i] = outputList[i]; } } void SutherlandHodgemanPolygonClip() { clipAgainstSide(LEFT); clipAgainstSide(RIGHT); clipAgainstSide(TOP); clipAgainstSide(BOTTOM); } void init() { glClearColor(1,1,1,0); glMatrixMode(GL_PROJECTION); gluOrtho2D(0,1000,0,500); } void display() { glClear(GL_COLOR_BUFFER_BIT); /* Displaying ORIGINAL box and polygon */ glColor3f(0,0,1); glBegin(GL_LINE_LOOP); glVertex2i(w.xmin, w.ymin); glVertex2i(w.xmin, w.ymax); glVertex2i(w.xmax, w.ymax); glVertex2i(w.xmax, w.ymin); glEnd(); glColor3f(1,0,0); glBegin(GL_LINE_LOOP); for(int i=0 ; i<numberOfVertices ; i++) { glVertex2i(pointList[i].x, pointList[i].y); } glEnd(); /* Clipping */ SutherlandHodgemanPolygonClip(); /* Displaying CLIPPED box and polygon, 500px right */ glColor3f(0,0,1); glBegin(GL_LINE_LOOP); glVertex2i(w.xmin+500, w.ymin); glVertex2i(w.xmin+500, w.ymax); glVertex2i(w.xmax+500, w.ymax); glVertex2i(w.xmax+500, w.ymin); glEnd(); glColor3f(1,0,0); glBegin(GL_LINE_LOOP); for(int i=0 ; i<numberOfVertices ; i++) { glVertex2i(pointList[i].x+500, pointList[i].y); } glEnd(); glFlush(); } int main(int argc, char** argv) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); glutInitWindowSize(1000,500); glutCreateWindow("Sutherland-Hodgeman polygon clipping"); init(); glutDisplayFunc(display); glutMainLoop(); return 0; }

Read the article

AngularJS databinding

- by user3652865

How can I add multiple values to one object in an Array. I am having Environment and Cluster, I am able to assign multiple clusters to one environment. Now I want to add application name to this environment and cluster pair. I am having page called "Add Application". Here I am using select menu to for environment and Cluster. My first question is, when I select environment then want to show only those clusters which are assigned to that environment name. And assign application name to that pair. Also should be able to edit the Application field. I am using environmentServices and clusterServices to store updated data. link of JSFiddle: http://jsfiddle.net/avinashMaddy/J2KLK/5/ Please if someone can help me in this. Below is my code: <div class="maincontent" ng-controller="manageApplicationController"> <div class="article"> <form> <section>  <div class="col-md-4"> <label>Environment:</label> <select ng-model="newApp.selectedEnvironment" class="form-control" ng-options="environment.name for environment in environments"> <option value='' disabled style='display:none;'> Select Environment </option> </select> <span> <select ng-switch-when="true" disabled ng-model="newApp.selectedEnvironment" class="form-control" ng-options="environment.name for environment in environments"> <option value='' disabled style='display:none;'> Select Environment </option> </select> </span> </div>  <div class="col-md-4"> <label>Cluster:</label> <span ng-switch on="newApp.showCancel"> <select ng-switch-default ng-model="newApp.selectedCluster" class="form-control" ng-options="cluster for cluster in clusters"> <option value='' disabled style='display:none;'> Select Environment </option> </select> <select ng-switch-when="true" disabled ng-model="newApp.selectedCluster" class="form-control" ng-options="cluster for cluster in clusters"> <option value='' disabled style='display:none;'> Select Environment </option> </select> </span> </div>  <div class="col-md-4"> <label>Application Name:</label> <input type="text" class="form-control" name="applicationName" placeholder="Application" ng-model="app.name" required> <br/> <input type="hidden" ng-model="app.id" /> </div> </section>  <section class="col-md-12"> <button type="button" class="btn btn-default pull-right" ng-click="saveNewApplicatons()">Save</button> </section> </form> </div>  <div class="article"> <table class="table table-bordered table-striped"> <tr> <th colspan="6"> <div class="pull-left">Cluster Info</div> </th> </tr> <tr> <th>Environment</th> <th>Cluster</th> <th>Application</th> <th>Edit</th> <th>Header Ifo</th> </tr> <tr ng-repeat="app in applications"> <td>{{app.environment}}</td> <td>{{app.cluster}}</td> <td>{{app.name}}</td> <td> <a href="" ng-click="edit(app.id)" title="Edit">edit</span></a> | <a href="" ng-click="remove(app.id)" title="Delete">delete</a> </td> <td>  <script type="text/ng-template" id="addHederInfo.html"> <div class="modal-header"> <h3>Add Header Info</h3> </div> <div class="modal-body"> <input type="text" class="form-control" name="eName" placeholder="Header Key" ng-model="$parent.header.key"> <br/> <input type="text" class="form-control" name="eName" placeholder="Header Value" ng-model="$parent.header.value"> <br /> <input type="hidden" ng-model="header.id" /> <section> <div class="pull-right"> <button class="btn btn-primary" ng-click="saveHeader()">Add</button> <button class="btn btn-warning" ng-click="cancel()">Close</button> </div> </section> </div> <div class="modal-footer"> <h3>Existing Header Info for </h3> <table class="table table-bordered table-striped"> <tr> <th>Header Key</th> <th>Header Vlaue</th> </tr> <tr ng-repeat="header in headers"> <td>{{header.key}}</td> <td>{{header.value}}</td> </tr> </table> </div> </script>  <script type="text/ng-template" id="editHederInfo.html"> <div class="modal-header"> <h3>Edit Header Info</h3> </div> <div class="modal-body"> <input type="text" class="form-control" name="eName" placeholder="Header Key" ng-model="$parent.header.key"> <br/> <input type="text" class="form-control" name="eName" placeholder="Header Value" ng-model="$parent.header.value"> <br /> <input type="hidden" ng-model="header.id" /> <section> <div class="pull-right"> <button class="btn btn-primary" ng-click="saveHeader()">Update</button> <button class="btn btn-warning" ng-click="cancel()">Close</button> </div> </section> </div> <div class="modal-footer"> <h3>Existing Header Info for</h3> <table class="table table-bordered table-striped"> <tr> <th>Header Key</th> <th>Header Vlaue</th> <th>Edit</th> </tr> <tr ng-repeat="header in headers"> <td>{{header.key}}</td> <td>{{header.value}}</td> <td> <a href="" ng-click="editHeader(header.id)" title="Edit"><span class="glyphicon glyphicon-edit" ></span></a> | <a href="" ng-click="removeHeader(header.id)" title="Edit"><span class="glyphicon glyphicon-trash"></span></a> </td> </tr> </table> </div> </script>   <a href="" ng-click="addInfo()">Add</a> | <a href="" ng-click="editInfo()">Edit</a> </td> </tr> </table> </div> </div> Controller.js: var apsApp = angular.module('apsApp', []); apsApp.service('clusterService', function(){ var clusters=[]; //simply returns the environment list this.list = function () { return clusters; }; }); apsApp.service('environmentService', function(){ var environments=[ {name :'DEV',}, {name:'PROD',}, {name:'QA',}, {name:'Linux_Dev',} ]; //simply returns the environment list this.list = function () { return environments; }; apsApp.controller('manageApplicationController', function ($scope, environmentService, clusterService) { var uid = 0; $scope.environments= environmentService.list(); $scope.clusters= clusterService.list(); $scope.newApp = {}; $scope.newApp.selectedEnvironment = $scope.environments[0]; $scope.newApp.selectedCluster = $scope.clusters[0]; $scope.newApp.buttonLabel = 'Save'; $scope.newApp.showCancel = false; /*$scope.applications=[ {'name': 'Enterprice App Store' }, {'name': 'UsageGateway'}, {'name': 'Click 2 Fill'}, {'name': 'ATT SmartWiFi'} ];*/ //add new application $scope.saveNewApplicatons = function() { if ($scope.select.id == undefined) { //if this is new application, add it in applications array $scope.clusters.push({ id: uid++, cluster: $scope.newApp.cluster, environment: $scope.newApp.selectedEnvironment }); } else { $scope.clusters[$scope.select.id].cluster = $scope.select.cluster; $scope.newApp.id = undefined; $scope.newApp.buttonLabel = 'Save Cluster'; $scope.newApp.showCancel = false; }; //clear the add appplicaitons form $scope.newApp.selectedEnvironment = $scope.environments[0]; }; //delete application $scope.remove = function (id) { //search app with given id and delete it for (i in $scope.clusters) { if ($scope.clusters[i].id == id) { confirm("This Cluster will get deleted permanently"); $scope.clusters.splice(i, 1); $scope.clust = {}; } } }; $scope.cancelUpdate = function () { $scope.newApp.buttonLabel = 'Save Cluster'; $scope.newApp.showCancel = false; $scope.newApp.id = undefined; $scope.newApp.cluster = ""; $scope.newApp.selectedEnvironment = $scope.environments[0]; }; });

Search Results

Search found 24935 results on 998 pages for 'double click'.

Page 147/998 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >

- by lsk1985

- by question_about_the_problem

- by NewHelpNeeder

- by Mur Quirk

- by SherCoder

- by DHF

- by robcarrol

- by rajbk

- by Matthew Guay

- by DigiMortal

- by nmarun

- by Milo

- by Milo

- by Eran_Steiner

- by Magnus Karlsson

- by user71458

- by BrotherJack

- by ScottGu

- by user34790

- by James Michael Hare

- by Brian

- by Eugene

- by max

- by user3652865

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >