Search Results

Search found 4741 results on 190 pages for 'john watson'.

Page 147/190 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Bacula v5.0.2 Windows Installation Issues

    - by JohnyD
    First off, I am very new to Bacula but I'm very intriqued from what I've read. I'm looking to set up Bacula 5.0.2 on a Windows 2008 R2 server. I've run the installer and at the end it asks me to configure DIR name, DIR password, DIR Address. Windows documentation is somewhat hard to come by and I'm not certain what exactly I'm supposed to enter here. Do I need to create a local account that matches this info? Will the installation process create the account for me? Will this be the account that handles the FD daemon/service? I'm also not certain if Address means network location or local direcory. I apologize for my ignorance. Currently I'm trying to use the following information: Name: john pass: john address: thin1 (server name although I have also tried thin1.fqdm.local and 10.0.0.104) This info allows for the installer to complete successfully. However, when I run the BAT it hangs at, "Connecting to Director thin1:9101". The Bacula File Service is currently running under the local system account. What am I doing wrong? What do I have yet to do? Once I get this working properly I assume I will need to install clients on all my Windows boxes? Also, this is a 64-bit cpu but I am installing the 32-bit client. Are there any issues with this? Should I be using the 32-bit client? Thanks very much for the help.

    Read the article

  • Mail.app doesn't detect sender in Address Book

    - by CoreSandello
    Hi there. I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

    Read the article

  • Mail.app doesn't detect sender in Address Book

    - by CoreSandello
    I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

    Read the article

  • RTL8192SU + RTL8191E Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8191E working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? new in Mandriva Linux Control Center 2010.0 it shows up in Other/Unknown as RTL8191S WLAN Adapter and on the right pane this shows up Identification Vendor: ?Manufacturer Realtek Description: ?RTL8191S WLAN Adapter Media class: ? Connection Bus: ?USB Bus PCI #: ?1 PCI device #: ?5 Vendor ID: ?0x0bda Device ID: ?0x8172 Sub vendor ID: ?0x0000 Sub device ID: ?0x0000 Misc Module: ?rtl819xU In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Retrieve a user's Exchange database in powershell

    - by Paul
    Hey Everyone, I've scoured the interwebs for a few days now off and on to find this. I am creating a powershell script for email-enabling new user's(Exchange 2007). To give you a little background when we have a new hire, their AD account is created at our off-site helpdesk, but they don't create their email account. I'm trying to automate the process of mail-enabling the user which involves putting them in the same database as an existing user, disable imap pop activesync, and lastly email the requester of the ticket. I would like to just get prompted for the New User's name, User to Replicate(mailbox, storage group, database), and the person to email after it's been created. So if someone could just help with a command to Retrieve a user's Exchange database in powershell that would be great, but if people also want to help with my hacked up script please do so as well!!! Here is what I have so far: Write-output “ENTER THE FOLLOWING DETAILS” $DName = Read-Host “User Diplay Name" $RUser = Read-Host "Replicate User(Database Grab)" ***$RData = #get the Replicate user's mailbox database here*** $REmail = #either just use a Read-Host “Requester's Email address" or ask for Requester's name and pipe through their email address by digging for it w/ powershell Enable-Mailbox -Identity "$DName" -Database "$RData" Send-MailMessage -From "John Doe <[email protected]>" -To (put $REmail here which is the Requester's email) -Subject "Test Person's email account" -Body "Test Person's email account has been setup.`n`n`nJohn Doe`nGeneric Company`nSystems Administrator`nOffice: 123.456.7890`[email protected]" -SmtpServer genericexchange.exchange.com

    Read the article

  • MS Excel and Access - which is better for reports?

    - by Nat
    Where I work, staff have just started to use a basic table in excel (1 october) to record sales which has about 10 columns (name, client, renewed, discount, paid etc). I record the data (total sold etc) every hour and email it to the manager. Each staff has the their own file on the network which they use constantly for that day (eg. John 08-10.xlsx; John 09-10.xlsx etc) and have been told to save the file after they complete a row with client data. I can see the file (in read only mode) to update the report but I am sure there must be a way of doing an autoupdate of their worksheets in real time. I can link worksheets and workbooks to my main workbook but manually. Does anyone have suggestions on have to do this on Excel? Or would Access allow me to make a report which shows the sales total for that hour without the staff closing the file or constantly clicking save every few minutes? We use office 2010. thanks

    Read the article

  • Gmail: Received an email intended for another person. [closed]

    - by jonescb
    I'm not really sure how email routing works, but someone ordered something on Amazon and I received the email instead of them. Or maybe we both got it, I don't know. The order doesn't show up in my account, so I'm certain I wasn't charged for it, but I shouldn't be getting other peoples' emails. We'll say that my email is [email protected], and somebody who's email is john[email protected] places an order on Amazon. The confirmation email is sent to me at [email protected]. I checked the email header, and it did say To: john[email protected] which is not my email address. At first I thought that Google ignores periods in email addresses, but I tested the account setup and it doesn't give any error when you put a period in the address. I didn't create the account; I just used the "check availability" function and the address I chose with a period was fine. Maybe someone with knowledge about how Email works could tell me why this happened. Is this a bug in the way Amazon sends emails? Or is it a bug in how Google receives them? Who should I report this issue to?

    Read the article

  • Can we do a DNSSEC 101? [closed]

    - by PAStheLoD
    Please share your opinions, FAQs, HOWTOs, best practices (or links to the one you think is the best) and your fears and thoughts about the whole migration (or should I just call it a new piece of tech?). Is DNSSEC just for DNS providers (name server operators)? What ought John Doe to do, who hosts johndoe.com at some random provider (GoDaddy, DreamHost and such)? Also, what if the provider's name server doesn't do automatic signing magic, can John do it manually? In a fire-and-forget way, without touching KSKs and ZSKs rollovers and updating and headaches?) Does it bring any change regarding CERT records? Do browsers support it? How come it became so complex? Why didn't they just merged it with SSL? DKIM is pretty straightforward, IANA/IETF could've opted for something like that. (Yes I know that creating a trust anchor would be still problematic, but browsers are already full of CA certs. So, they could've just let anyone get a cert for a domain for shiny green padlocks, or just generate one for a poor blue lock, put it into a TXT record, encrypt the other records and let the parent zone sign the whole for you with its cert.) Thanks! And for disclosure (it seemed like the customary thing to do around here), I've asked the same on the netsec subreddit.

    Read the article

  • CakePHP 3-level-deep model associatons

    - by user357452
    Hi, I am relatively new to CakePHP, I am doing fine with the documentation, but I've been trying to find a way out to this problem for weeks and I don't seem to find the solution, I am sure it is easy and maybe even automagicaly doable, but I just don't know how to find it (maybe I don't know the jargon for these kind of things) My model structure is like this: <?php class Trip extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Start' => array( 'className' => 'Place', 'foreignKey' => 'start_id' ), 'End' => array( 'className' => 'Place', 'foreignKey' => 'end_id' ), 'Transport' => array( 'className' => 'Transport', 'foreignKey' => 'transport_id' ) ); } ?> <?php class Place extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id' ), 'State' => array( 'className' => 'State', 'foreignKey' => 'state_id' ), 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id' ) ); var $hasMany = array( 'PlaceStart' => array( 'className' => 'trip', 'foreignKey' => 'start_id', 'dependent' => false ), 'PlaceEnd' => array( 'className' => 'trip', 'foreignKey' => 'end_id', 'dependent' => false ) ); } ?> <?php class State extends AppModel { var $belongsTo = array( 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id', 'conditions' => '', 'fields' => '', 'order' => '' ) ); var $hasMany = array( 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id', 'dependent' => false ) ); } ?> ... and so forth with User, City, Country, and Transport Models. What I am trying to achieve is to get all the information of the whole tree when I search for a Trip. <?php class TripController extends AppController { function index() { debug($this->Trip->find('first')); } } Outputs Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [user_id] => 4 [start_id] => 2 [end_id] => 1 [title] => My trip [transport_id] => 1 ) [User] => Array ( [id] => 4 [name] => John Doe [email] => john[email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 1 [direccion] => Lincoln Street ) [End] => Array ( [id] => 1 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 4 [address] => Fifth Avenue ) [Transport] => Array ( [id] => 1 [name] => car ) ) Here is the question: How do I get in one query all the information down the tree? I would like to have something like Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [User] => Array ( [id] => 4 [name] => John Doe [email] => john[email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [Country] => Array ( [id] => 1 [name] = Spain ) [State] => Array ( [id] => 1 [name] = Barcelona ) [City] => Array ( [id] => 1 [name] = La Floresta ) [address] => Lincoln Street ) [End] => (same as Start) [title] => My trip [Transport] => Array ( [id] => 1 [name] => car ) ) ) Can CakePHP create this kind of data? Not only for $this->Model->find() but also for $this->paginate() as for example: // filter by start if(isset($this->passedArgs['start'])) { //debug('isset '.$this->passedArgs['start']); $start = $this->passedArgs['start']; $this->paginate['conditions'][] = array( 'OR' => array( 'Start.address LIKE' => "%$start%", 'Start.State.name LIKE' => "%$start%", 'Start.City.name LIKE' => "%$start%", 'Start.Country.name LIKE' => "%$start%" ) ); $this->data['Search']['start'] = $start; } It seems like a rough question but I am sure this is extensively done and documented, I'd really appreciate any help. Thanks Cheers Naoise

    Read the article

  • Scrolling an HTML 5 page using JQuery

    - by nikolaosk
    In this post I will show you how to use JQuery to scroll through an HTML 5 page.I had to help a friend of mine to implement this functionality and I thought it would be a good idea to write a post.I will not use any JQuery scrollbar plugin,I will just use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/download.Please find here all my posts regarding JQuery.Also have a look at my posts regarding HTML 5.In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. Let me move on to the actual example.This is the sample HTML 5 page<!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >        <link rel="stylesheet" type="text/css" href="style.css">        <script type="text/javascript" src="jquery-1.8.2.min.js"> </script>     <script type="text/javascript" src="scroll.js">     </script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>        <div id="main">        <table>        <caption>Liverpool Players</caption>        <thead>            <tr>                <th>Name</th>                <th>Photo</th>                <th>Position</th>                <th>Age</th>                <th>Scroll</th>            </tr>        </thead>        <tfoot class="footnote">            <tr>                <td colspan="4">We will add more photos soon</td>            </tr>        </tfoot>    <tbody>        <tr class="maintop">        <td>Alan Hansen</td>            <td>            <figure>            <img src="images\Alan-hansen-large.jpg" alt="Alan Hansen">            <figcaption>The best Liverpool Defender <a href="http://en.wikipedia.org/wiki/Alan_Hansen">Alan Hansen</a></figcaption>            </figure>            </td>            <td>Defender</td>            <td>57</td>            <td class="top">Middle</td>        </tr>        <tr>        <td>Graeme Souness</td>            <td>            <figure>            <img src="images\graeme-souness-large.jpg" alt="Graeme Souness">            <figcaption>Souness was the captain of the successful Liverpool team of the early 1980s <a href="http://en.wikipedia.org/wiki/Graeme_Souness">Graeme Souness</a></figcaption>            </figure>            </td>            <td>MidFielder</td>            <td>59</td>        </tr>        <tr>        <td>Ian Rush</td>            <td>            <figure>            <img src="images\ian-rush-large.jpg" alt="Ian Rush">            <figcaption>The deadliest Liverpool Striker <a href="http://it.wikipedia.org/wiki/Ian_Rush">Ian Rush</a></figcaption>            </figure>            </td>            <td>Striker</td>            <td>51</td>        </tr>        <tr class="mainmiddle">        <td>John Barnes</td>            <td>            <figure>            <img src="images\john-barnes-large.jpg" alt="John Barnes">            <figcaption>The best Liverpool Defender <a href="http://en.wikipedia.org/wiki/John_Barnes_(footballer)">John Barnes</a></figcaption>            </figure>            </td>            <td>MidFielder</td>            <td>49</td>            <td class="middle">Bottom</td>        </tr>                <tr>        <td>Kenny Dalglish</td>            <td>            <figure>            <img src="images\kenny-dalglish-large.jpg" alt="Kenny Dalglish">            <figcaption>King Kenny <a href="http://en.wikipedia.org/wiki/Kenny_Dalglish">Kenny Dalglish</a></figcaption>            </figure>            </td>            <td>Midfielder</td>            <td>61</td>        </tr>        <tr>            <td>Michael Owen</td>            <td>            <figure>            <img src="images\michael-owen-large.jpg" alt="Michael Owen">            <figcaption>Michael was Liverpool's top goal scorer from 1997–2004 <a href="http://www.michaelowen.com/">Michael Owen</a></figcaption>            </figure>            </td>            <td>Striker</td>            <td>33</td>        </tr>        <tr>            <td>Robbie Fowler</td>            <td>            <figure>            <img src="images\robbie-fowler-large.jpg" alt="Robbie Fowler">            <figcaption>Fowler scored 183 goals in total for Liverpool <a href="http://en.wikipedia.org/wiki/Robbie_Fowler">Robbie Fowler</a></figcaption>            </figure>            </td>            <td>Striker</td>            <td>38</td>        </tr>        <tr class="mainbottom">            <td>Steven Gerrard</td>            <td>            <figure>            <img src="images\steven-gerrard-large.jpg" alt="Steven Gerrard">            <figcaption>Liverpool's captain <a href="http://en.wikipedia.org/wiki/Steven_Gerrard">Steven Gerrard</a></figcaption>            </figure>            </td>            <td>Midfielder</td>            <td>32</td>            <td class="bottom">Top</td>        </tr>    </tbody></table>          </div>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>  The markup is very easy to follow and understand. You do not have to type all the code,simply copy and paste it.For those that you are not familiar with HTML 5, please take a closer look at the new tags/elements introduced with HTML 5.When I view the HTML 5 page with Firefox I see the following result. I have also an external stylesheet (style.css). body{background-color:#efefef;}h1{font-size:2.3em;}table { border-collapse: collapse;font-family: Futura, Arial, sans-serif; }caption { font-size: 1.2em; margin: 1em auto; }th, td {padding: .65em; }th, thead { background: #000; color: #fff; border: 1px solid #000; }tr:nth-child(odd) { background: #ccc; }tr:nth-child(even) { background: #404040; }td { border-right: 1px solid #777; }table { border: 1px solid #777;  }.top, .middle, .bottom {    cursor: pointer;    font-size: 22px;    font-weight: bold;    text-align: center;}.footnote{text-align:center;font-family:Tahoma;color:#EB7515;}a{color:#22577a;text-decoration:none;}     a:hover {color:#125949; text-decoration:none;}  footer{background-color:#505050;width:1150px;}These are just simple CSS Rules that style the various HTML 5 tags,classes. The jQuery code that makes it all possible resides inside the scroll.js file.Make sure you type everything correctly.$(document).ready(function() {                 $('.top').click(function(){                     $('html, body').animate({                         scrollTop: $(".mainmiddle").offset().top                     },4000 );                  });                 $('.middle').click(function(){                     $('html, body').animate({                         scrollTop: $(".mainbottom").offset().top                     },4000);                  });                     $('.bottom').click(function(){                     $('html, body').animate({                         scrollTop: $(".maintop").offset().top                     },4000);                  }); });  Let me explain what I am doing here.When I click on the Middle word (  $('.top').click(function(){ ) this relates to the top class that is clicked.Then we declare the elements that we want to participate in the scrolling. In this case is html,body ( $('html, body').animate).These elements will be part of the vertical scrolling.In the next line of code we simply move (navigate) to the element (class mainmiddle that is attached to a tr element.)      scrollTop: $(".mainmiddle").offset().top  Make sure you type all the code correctly and try it for yourself. I have tested this solution will all 4-5 major browsers.Hope it helps!!!

    Read the article

  • Error with SQL Server Setup 2012 on Windows 2012

    - by Jeff
    I am trying to install SQL Server on Windows 2012. I was able to finally get the wizard up and running after making some changes on the server, but now it fails no matter what I do with the following error: TITLE: SQL Server Setup failure. SQL Server Setup has encountered the following error: There is an error in XML document (108, 148).. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0x066FCAFD%25400x5539C151 LinkID: 20476 Product Name: Microsoft SQL Server Message Source setup.rll Message ID: 50000 EvtType: 0x066FCAFD%400x5539C151 What I've tried: Installing from commandline with /q Result from CL installation: Error result: -2147467259 Result facility code: 0 Result error code: 16389 Please review the summary.txt log for further details The Verbose CL installation reveals: Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1033: NotInstalled Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1036: NotInstalled Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1040: NotInstalled Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1041: NotInstalled Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1042: NotInstalled Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1046: NotInstalled Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1049: NotInstalled Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_2052: NotInstalled Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_3082: NotInstalled Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\x64\sql_bids_loc.msi' does not exist Package ID sql_bids_loc_Cpu64_1053: NotInstalled Sco: File 'C:\SQL Install\x64\setup\x64\sql_ssms.msi' does not exist Sco: File 'C:\SQL Install\x64\setup\x64\sql_ssms.msi' does not exist Package ID sql_ssms_Cpu64: NotInstalled Sco: File 'C:\SQL Install\1028_CHT_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1028_CHT_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1028: NotInstalled Sco: File 'C:\SQL Install\1031_DEU_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1031_DEU_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1031: NotInstalled Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1033: NotInstalled Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1036: NotInstalled Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1040: NotInstalled Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1041: NotInstalled Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1042: NotInstalled Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1046: NotInstalled Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1049: NotInstalled Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_2052: NotInstalled Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_3082: NotInstalled Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\x64\sql_ssms_loc.msi' does not exist Package ID sql_ssms_loc_Cpu64_1053: NotInstalled Sco: File 'C:\SQL Install\x64\setup\sql_common_core_msi\x64\sql_common_core.msi' does not e Sco: File 'C:\SQL Install\x64\setup\sql_common_core_msi\x64\sql_common_core.msi' does not e Package ID sql_common_core_Cpu64: NotInstalled Sco: File 'C:\SQL Install\1028_CHT_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1028_CHT_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1028: NotInstalled Sco: File 'C:\SQL Install\1031_DEU_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1031_DEU_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1031: NotInstalled Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1033: NotInstalled Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1036_FRA_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1036: NotInstalled Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1040_ITA_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1040: NotInstalled Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1041_JPN_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1041: NotInstalled Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1042_KOR_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1042: NotInstalled Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1046_PTB_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1046: NotInstalled Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1049_RUS_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1049: NotInstalled Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\2052_CHS_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_2052: NotInstalled Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\3082_ESN_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_3082: NotInstalled Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Sco: File 'C:\SQL Install\1053_SVE_LP\x64\setup\sql_common_core_loc_msi\x64\sql_common_core Package ID sql_common_core_loc_Cpu64_1053: NotInstalled Sco: File 'C:\Users\Administrator\AppData\Local\Temp\2\SQL Server 2012\Setup\1033_ENU_LP\x6 lSupport.msi' does not exist Sco: File 'C:\Users\Administrator\AppData\Local\Temp\2\SQL Server 2012\Setup\1033_ENU_LP\x6 lSupport.msi' does not exist Package ID SqlSupport_Cpu64: NotInstalled Sco: File 'C:\SQL Install\redist\watson\x86\dw20shared.msi' does not exist Sco: File 'C:\SQL Install\redist\watson\x86\dw20shared.msi' does not exist Package ID WatsonX86_Cpu32: NotInstalled Package ID sqlncli_Cpu64: NotInstalled Package ID SqlLocalDB_Cpu64: NotInstalled Package ID SqlLocalDB_CTP3_Cpu64: NotInstalled Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x86\SSDTStub.msi' does not exist Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x86\SSDTStub.msi' does not exist Package ID SSDTStub_Cpu32: NotInstalled Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x86\SSDTDBSvcExternals.msi' does not exist Sco: File 'C:\SQL Install\1033_ENU_LP\x64\setup\x86\SSDTDBSvcExternals.msi' does not exist What does this mean?

    Read the article

  • exchange server 2010 Outlook Web Access - Exchange Control Panel WEB Interface

    - by Aceth
    from what i can gather the mailbox bit of the web interface works fine.. when any of the users go to options (top right) and try to use some of the features such as the Organise Mail Delivery Reports to find messages etc... it comes up with a message .. "An item with the same key has already been added" I've looked in the event viewer and i think its this error - Watson report about to be sent for process id: 7016, with parameters: E12IIS, c-RTL-AMD64, 14.00.0639.021, ECP, ECP.Powershell, https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList, UnexpectedCondition:ArgumentException, c09, 14.00.0639.021. ErrorReportingEnabled: False and Request for URL 'https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList' failed with the following error: System.ArgumentException: An item with the same key has already been added. at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.ExecuteSynchronous(HttpApplication context, Boolean flowContext) at Microsoft.Exchange.Management.ControlPanel.WebServiceHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I've tried googling but no luck that's relevant :(

    Read the article

  • exchange server 2010 Outlook Web Access - Exchange Control Panel WEB Interface

    - by Aceth
    from what i can gather the mailbox bit of the web interface works fine.. when any of the users go to options (top right) and try to use some of the features such as the Organise Mail Delivery Reports to find messages etc... it comes up with a message .. "An item with the same key has already been added" I've looked in the event viewer and i think its this error - Watson report about to be sent for process id: 7016, with parameters: E12IIS, c-RTL-AMD64, 14.00.0639.021, ECP, ECP.Powershell, https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList, UnexpectedCondition:ArgumentException, c09, 14.00.0639.021. ErrorReportingEnabled: False and Request for URL 'https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList' failed with the following error: System.ArgumentException: An item with the same key has already been added. at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.ExecuteSynchronous(HttpApplication context, Boolean flowContext) at Microsoft.Exchange.Management.ControlPanel.WebServiceHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I've tried googling but no luck that's relevant :(

    Read the article

  • How useful is mounting /tmp noexec?

    - by Novelocrat
    Many people (including the Securing Debian Manual) recommend mounting /tmp with the noexec,nodev,nosuid set of options. This is generally presented as one element of a 'defense-in-depth' strategy, by preventing the escalation of an attack that lets someone write a file, or an attack by a user with a legitimate account but no other writable space. Over time, however, I've encountered arguments (most prominently by Debian/Ubuntu Developer Colin Watson) that noexec is a useless measure, for a couple potential reasons: The user can run /lib/ld-linux.so <binary> in an attempt to get the same effect. The user can still run system-provided interpreters on scripts that can't be run directly Given these arguments, the potential need for more configuration (e.g. debconf likes an executable temporary directory), and the potential loss of convenience, is this a worthwhile security measure? What other holes do you know of that enable circumvention?

    Read the article

  • Introducing Ben Barreth, Community Builder &amp; Software Developer at GWB

    - by Staff of Geeks
    Please extend a warm welcome to Ben Barreth as the new community builder and full-time software developer at Geeks With Blogs. We've been wanting to add some cool features to the site but haven't had the opportunity until now. Adding Ben to the team should give us a big kick in the right direction. Ben has several years of .Net development experience and is heavily involved in the startup community in Kansas City, including the KC Startup Village as well as his own startup initiatives: Homes for Hackers and FreeIdeas.co. He loves working with people even more than coding and is excited to serve the GWB community in any way possible. Ben originally met Matt Watson as a beta tester for Stackify, the software company that gives developers the safe & secure access to troubleshoot in production. Jeff Julian and Matt are old friends and recently decided the site needed new ownership to carry it forward and build the enhancements it deserves. The site management transferred in October and Matt quickly began looking for a full-time community builder to lead the charge. Ben bumped into Matt once again at a Tech Cocktail event at the Boulevard Brewery where Stackify was presenting and an alliance was forged. Yes, the beer really IS that good! Which brings us to the biggest question of all: Where do you want Geeks with Blogs to go next? As a contributor to the GWB community, now is your chance to be heard! What are we missing? Features on our radar: New templates Add a code "formatter" to posts Add categories to blog feeds Re-skin the site and redesign the logo Feel free to contact Ben with further questions and ideas below. We need your help! @BenBarreth [email protected] Cell: 816-332-9770 www.linkedin.com/in/benbarreth

    Read the article

  • Using Razor together with ASP.NET Web API

    - by Fredrik N
    On the blog post “If Then, If Then, If Then, MVC” I found the following code example: [HttpGet]public ActionResult List() { var list = new[] { "John", "Pete", "Ben" }; if (Request.AcceptTypes.Contains("application/json")) { return Json(list, JsonRequestBehavior.AllowGet); } if (Request.IsAjaxRequest()) [ return PartialView("_List", list); } return View(list); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is a ASP.NET MVC Controller where it reuse the same “business” code but returns JSON if the request require JSON, a partial view when the request is an AJAX request or a normal ASP.NET MVC View. The above code may have several reasons to be changed, and also do several things, the code is not closed for modifications. To extend the code with a new way of presenting the model, the code need to be modified. So I started to think about how the above code could be rewritten so it will follow the Single Responsibility and open-close principle. I came up with the following result and with the use of ASP.NET Web API: public String[] Get() { return new[] { "John", "Pete", "Ben" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   It just returns the model, nothing more. The code will do one thing and it will do it well. But it will not solve the problem when it comes to return Views. If we use the ASP.NET Web Api we can get the result as JSON or XML, but not as a partial view or as a ASP.NET MVC view. Wouldn’t it be nice if we could do the following against the Get() method?   Accept: application/json JSON will be returned – Already part of the Web API   Accept: text/html Returns the model as HTML by using a View   The best thing, it’s possible!   By using the RazorEngine I created a custom MediaTypeFormatter (RazorFormatter, code at the end of this blog post) and associate it with the media type “text/html”. I decided to use convention before configuration to decide which Razor view should be used to render the model. To register the formatter I added the following code to Global.asax: GlobalConfiguration.Configuration.Formatters.Add(new RazorFormatter()); Here is an example of a ApiController that just simply returns a model: using System.Web.Http; namespace WebApiRazor.Controllers { public class CustomersController : ApiController { // GET api/values public Customer Get() { return new Customer { Name = "John Doe", Country = "Sweden" }; } } public class Customer { public string Name { get; set; } public string Country { get; set; } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Because I decided to use convention before configuration I only need to add a view with the same name as the model, Customer.cshtml, here is the example of the View:   <!DOCTYPE html> <html> <head> <script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.5.1.min.js" type="text/javascript"></script> </head> <body> <div id="body"> <section> <div> <hgroup> <h1>Welcome '@Model.Name' to ASP.NET Web API Razor Formatter!</h1> </hgroup> </div> <p> Using the same URL "api/values" but using AJAX: <button>Press to show content!</button> </p> <p> </p> </section> </div> </body> <script type="text/javascript"> $("button").click(function () { $.ajax({ url: '/api/values', type: "GET", contentType: "application/json; charset=utf-8", success: function(data, status, xhr) { alert(data.Name); }, error: function(xhr, status, error) { alert(error); }}); }); </script> </html> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Now when I open up a browser and enter the following URL: http://localhost/api/customers the above View will be displayed and it will render the model the ApiController returns. If I use Ajax against the same ApiController with the content type set to “json”, the ApiController will now return the model as JSON. Here is a part of a really early prototype of the Razor formatter (The code is far from perfect, just use it for testing). I will rewrite the code and also make it possible to specify an attribute to the returned model, so it can decide which view to be used when the media type is “text/html”, but by default the formatter will use convention: using System; using System.Net.Http.Formatting; namespace WebApiRazor.Models { using System.IO; using System.Net; using System.Net.Http.Headers; using System.Reflection; using System.Threading.Tasks; using RazorEngine; public class RazorFormatter : MediaTypeFormatter { public RazorFormatter() { SupportedMediaTypes.Add(new MediaTypeHeaderValue("text/html")); SupportedMediaTypes.Add(new MediaTypeHeaderValue("application/xhtml+xml")); } //... public override Task WriteToStreamAsync( Type type, object value, Stream stream, HttpContentHeaders contentHeaders, TransportContext transportContext) { var task = Task.Factory.StartNew(() => { var viewPath = // Get path to the view by the name of the type var template = File.ReadAllText(viewPath); Razor.Compile(template, type, type.Name); var razor = Razor.Run(type.Name, value); var buf = System.Text.Encoding.Default.GetBytes(razor); stream.Write(buf, 0, buf.Length); stream.Flush(); }); return task; } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Summary By using formatters and the ASP.NET Web API we can easily just extend our code without doing any changes to our ApiControllers when we want to return a new format. This blog post just showed how we can extend the Web API to use Razor to format a returned model into HTML.   If you want to know when I will post more blog posts, please feel free to follow me on twitter:   @fredrikn

    Read the article

  • The Citroen GT – An Awesome Video Game Car Brought to Life [Video]

    - by Asian Angel
    If you are familiar with the Gran Turismo 5 video game releases, then you will definitely recognize the Citroen GT. French automaker Citroen and Japanese racing simulation developer Polyphony Digital decided to take things one step further and collaborated to bring this awesome car to life. Then they turned it loose on the streets of London! Citroen GT on the Streets of London (HD) [via BoingBoing] You can learn more about the Citroen GT, car show appearances, and more at Wikipedia: GT by Citroen Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • Google Sky Map Turns Your Android Phone into a Digital Telescope

    - by ETC
    Whether you’re an astronomy buff or just somebody looking for a perfect “look how sweet my smartphone is!’ application, Google’s Sky Map application for Android phones is a must have app. If all the application did was show you detailed views of the night sky it would be pretty awesome based on that alone. Where Sky Map dazzles, however, is in linking together the GPS and tilt-sensors on your phone to turn your phone into a sky-watching window. Whatever you point the phone at, the screen displays. Want to see what stars are directly above you despite it being the middle of the day? Point the phone up. Curious what people on the opposite side of the word are seeing? Point the phone down and take a peek right through the Earth. Check out the video below to see the application in action: Google Sky Map is free and works wherever Android does. Google Sky Map [AppBrain] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • The Splendiferous Array of Culinary Tools [Infographic]

    - by ETC
    If your geeking out extends from the workbench to the kitchen counter, you’ll love this swanky infographic detailing the families of utensils in your kitchen drawers and cupboards. The poster showcases everything from scissors to strainers in a retro-style poster. If you can find a culinary tool in your kitchen that isn’t on the chart then you’re obviously a culinary wizard of the highest order. You can hit up the link below to check out the poster in full-size and downloadable glory or head over to the design company that created it here (and pre-order a printed copy for your kitchen). A Complete Guide to Your Kitchen Tools [Fast Co. Design via Design Sponge] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Splendiferous Array of Culinary Tools [Infographic] Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker

    Read the article

  • Ubuntu 12.04 does not see windows already install on my computer (dual installation)

    - by jacinta
    I was trying to install the ubuntu 12.4 along side windows 7 on my new HP Pavilion 64k desktop with windows 7 computer but Ubuntu said that ( This computer has no detected operating system) and some one said (I suggest you chkdsk your Windows partition. I also suggest you resize the NTFS in WIndows then install Ubuntu to the free space.) Therefore I did (To shrink a simple or spanned volume using the Windows interface In Disk Management, right-click the simple or spanned volume you want to shrink. Click Shrink Volume…. Follow the instructions on your screen.) Then When I try to install ubuntu 12.4 after doing this, I received the same error. I was going to undo what I did but I see that I lose 1g when I do that so now what do I do? it says I can do a new simple volume and maybe then the space will no longer be unallocated. Please help me. I think I have a bad cd (ubuntu 12.4) cause from my research I see that I am not suppose to get a screen saying that (The computer has no detected operating system) I think this is a bad cd and I hope I did not mess up my computer. Please help. .................................................................................... O k I think I am following what you said about how to edit my question irrational john. I did chkdsk as you and actionparsnip (andrew-woodhead666) told me to AND ALSO did a lot of other things before I found out how to chkdsk. No problems. Thank you. Then I put back the space (extended) I took from system. I still was only able to put back 15 and not 16 so it is up to 99mb not back to 100mb. Then I shrank HP (C) as you told me, to 10 13,240 mb which is (12.93gb Unallocated). I did not change it into NTSF by doing the (New Simple Volume Action) I just left it. Then I tried to install UBUNTU 12.04 live CD amd64 and it gave me the results it was sometimes giving me before which is result (THAT Ubuntu) does not tell me weather I have or have not an already installed windows7. It just goes to a window that would have showed me information on what I have and on the bottom (DEVICE FOR BOOT LOADER INSTALLATION /dev/sda ) and the option to go BACK, QUIT, or INSTALL. (I think it is the INSTALLATION TYPE window). Therefore I do what I have been doing and I QUIT. What do I do now? Sorry that it seems like I cannot do anything on my own. On the Youtube video how to install ubuntu dual-boot alongside windows UBUNTU is installed so easy. The installation option page gives 3 options including dual instillation and the disk even lets you use a slider to slide to the size of the partition size you want. Yet my UBUNTU live cd is a mess and I checked it as one of you guys told me and got back information that it is good. Oh well this guy says you should press a control key to tell which device you are using to install ubuntu before the screen comes up. I guess cause it is old. This page also shows you easy stuff that do not show up on my cd. how to dual-boot UBUNTU and windows 7 P.S.. I saw this on the windows 7 website windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions CREATE A BOOT PARTITION I HAD TO LEAVE OUT THE HTTP STUFF CAUSE I AM ONLY ALLOWED 2 ON A PAGE IT SAID To create a boot partition Warning Warning If you are installing different versions of Windows, you must install the earliest version first. If you don't do this, your computer may become inoperable. Open Computer Management by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management.? Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation. In the left pane, under Storage, click Disk Management. Right-click an unallocated region on your hard disk, and then click New Simple Volume. In the New Simple Volume Wizard, click Next. Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next. Accept the default drive letter or choose a different drive letter to identify the volume, and then click Next. In the Format Partition dialog box, do one of the following: If you don't want to format the volume right now, click Do not format this volume, and then click Next. To format the volume with the default settings, click Next. For more information about formatting, see Formatting disks and drives: frequently asked questions. Review your choices, and then click Finish. AND THIS ON ANOTHER PAGE. Formatting disks and drives: frequently asked questions Hard disks, the primary storage devices on your computer, need to be formatted before you can use them. When you format a disk, you configure it with a file system so that Windows can store information on the disk. Hard disks in new computers running Windows are already formatted. If you buy an additional hard disk to expand the storage of your computer, you might need to format it. Storage devices such as USB flash drives and flash memory cards usually come preformatted by the manufacturer, so you probably won't need to format them. CDs and DVDs, on the other hand, use different formats from hard disks and removable storage devices. For information about formatting CDs and DVDs, see Which CD or DVD format should I use? Warning Warning Formatting erases any existing files on a hard disk. If you format a hard disk that has files on it, the files will be deleted. WHAT I DID WAS I GOT TO COMPUTER MANAGEMENT SECTION THEN I CLICKED ON DRIVE HP(C) (it put stripes on to show it is selected) Then I click on ACTION selected ALL TASKS AND THEN selected SHRINK VOLUME and then chose how much space from what it was giving me that I wanted. (12.93gb) AND THAT WAS ALL I DID. THEN I TRIED TO INSTALL UBUNTU i NEVER GOT THE 3RD SCREEN THAT IS IN THE VIDEO I INCLUDED (THE YOUTUBE WITH THE ENGLISH GUY) INSTALLATION TYPE I ALSO DID NOT GET THE 4TH SCREEN THAT ALLOWS YOU TO SELECT PARTITION SIZE what i got next was the 2nd INSTILLATION TYPE window shown on the (LINUX BS DOS.COM) PAGE THAT I INCLUDED and it showed no information about any drives (no drives /partition or stuff was shown) only the Boot Loader statement and the dev/sda bar and that's why i did not press install but chose to QUIT. SORRY I JUST NOW SAW YOUR ANSWER IRRATIONAL JOHN. I SHRANK HP(C) BY 12.93GB MY UNALLOCATED SPACE IS NOW 12.93GB HP(C) = 907.17gb NTSF...YOU ARE CORRECT WITH EVERYTHING YOU SAID This is what i read on (http://)windows.microsoft.com/en-US/windows7/Create-a-boot-partition I am only allowed 2 links Create a boot partition You must be logged on as an administrator to perform these steps. A boot partition is a partition that contains the files for the Windows operating system. If you want to install a second operating system on your computer (called a dual-boot or multiboot configuration), you need to create another partition on the hard disk, and then install the additional operating system on the new partition. Your hard disk would then have one system partition and two boot partitions. (A system partition is the partition that contains the hardware-related files. These tell the computer where to look to start Windows.) To create a partition on a basic disk, there must be unallocated disk space on your hard disk. With Disk Management, you can create a maximum of three primary partitions on a hard disk. You can create extended partitions, which include logical drives within them, if you need more partitions on the disk. Picture of disk space in Computer ManagementUnallocated disk space If there is no unallocated space, you will either need to create space by shrinking or deleting an existing partition or by using a third-party partitioning tool to repartition your hard disk. For more information, see Can I repartition my hard disk? To create a boot partition Warning Warning If you are installing different versions of Windows, you must install the earliest version first. If you don't do this, your computer may become inoperable. Open Computer Management by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management.? Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation. In the left pane, under Storage, click Disk Management. Right-click an unallocated region on your hard disk, and then click New Simple Volume. In the New Simple Volume Wizard, click Next. Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next. Accept the default drive letter or choose a different drive letter to identify the volume, and then click Next. In the Format Partition dialog box, do one of the following: If you don't want to format the volume right now, click Do not format this volume, and then click Next. To format the volume with the default settings, click Next. For more information about formatting, see Formatting disks and drives: frequently asked questions. Review your choices, and then click Finish. I did what you told me @irrational john and this is the screen shot. I ENTERED ubuntu@ubuntu:~$ sudo os-prober computer did not respond so I entered ubuntu@ubuntu:~$ sudo apt-get -y remove dmraid computer responded with Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: dmraid 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 141 kB disk space will be freed. (Reading database ... 147515 files and directories currently installed.) Removing dmraid ... update-initramfs is disabled since running on read-only media Processing triggers for man-db ... I entered ubuntu@ubuntu:~$ sudo os-prober Computer Responded with /dev/sda1:Windows 7 (loader):Windows:chain /dev/sda3:Windows Recovery Environment (loader):Windows1:chain ubuntu@ubuntu:~$ ............... @obsessiveFOSS I don't know what is a Grub menu and I do not know what is the Ubuntu boot option The answer you gave to me was correct. This one {This apparently removes the dmraid metadata. After doing that, you can use the desktop icon Install Ubuntu 12.04 LTS to start the Ubuntu installer. This time the Installation Type window should contain the option to Install Ubuntu alongside Windows 7.} This is what I decided to do. I did not see the rest of your help 'till now. Never the less. I think the best thing for me to do now is to get a cheap used laptop and either do a dual installation or just install Ubuntu on to it. This way if I have any issues that I cannot solve like the one I had here, at least I will still have a usable computer to work on and to use to get answers with because I am not an expert like the people on this forum. Thanks a lot I will try to keep learning and do research enough to some day help someone else.

    Read the article

  • Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX

    - by Asian Angel
    Are you tired of the same old wallpaper on your Ubuntu desktop? Now you can go from blah to literally spacious, real-time styled views of Earth with the xplanetFX Wallpaper App for Linux. You can conveniently access the “file type” downloads, screenshots, and jump-to links all on the front page. For our example we downloaded the .deb setup file on our system. The setup file will need to download three additional files to complete the setup process. After those are downloaded all dependencies will have been met and you can complete the installation process. Once that is done you can find xplanetFX by going to the Accessories Section of your Ubuntu Menu. This is what the main control window looks like when you start xplanetFX for the first time. You should take a few moments to look through the various tabs and tweak the settings for items like location, screen resolution, timing, auto-start, etc. When you are done click on Execute and within a few moments your desktop will have a fresh new look! Note: It took ~30 seconds for the display to activate on our system. Have fun with xplanetFX! xplanetFX Homepage [via OMG! Ubuntu!] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope

    Read the article

  • Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu

    - by Asian Angel
    Desktop notifications from Chromium-based browsers are an awesome feature, but they do not blend in well at all with the native system theming in Ubuntu. Now you can fix that small problem using the wonderful Chromify-OSD extension created by Marco Ceppi. Once you get the extension installed you can give it a quick test run using the link and information we have listed below. As you can see in the image above the new notification style looks absolutely wonderful. Chromify-OSD (Chrome Web Store) [via OMG! Ubuntu!] You can test the new look of the notifications for yourself using the following webpage. Keep in mind that the extension needs to be installed first before this will work though. Note: Enter the following image URL into the Icon Blank (http://www.rgraph.net/images/logo.png) or the URL for an appropriate image, otherwise the notification may not work properly during your test. Chromify Sample HTML5 Notification Test Page The wallpaper shown in the screenshot above can be downloaded here: anime sport [DesktopNexus] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • How to View Netflix Watch Instantly in XBMC

    - by Justin Garrison
    Netflix streaming isn’t just a feature that is nice to have, for many people it is a must have for any video streaming software. Unfortunately it has been missing from XBMC for various reasons, until today. In order to get Netflix Watch Instantly working in XBMC you just need to have XBMC 10.0+ installed on Windows or OS X. Because of a lack of Silverlight support, this currently does not work on XBMC Live, Linux, or iOS devices (iPhone, iPad, AppleTV). You also need to live in a region that offers Netflix streaming (currently US and Canada) Latest Features How-To Geek ETC How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7

    Read the article

  • Chrome Time Track Is a Simple Task Time Tracker

    - by ETC
    If you don’t need advanced project tracking but still want to track how long it takes you to finish certain tasks or projects, Chrome Time Tracker is a free Chrome extension with a dead simple interface. Install the extension and a Time Track icon appears in your toolbar. Click it to create new tasks, delete old tasks, and start, stop, and reset your task timers. When the timer is running the icon changes to indicate you’re on the clock; pause the timer and it toggles back to the default icon. Hit up the link below to grab a copy. Chrome Time Track is free and works wherever Google Chrome does. Chrome Time Track [Google Chrome Extensions] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >