Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 147/210 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

  • Scan And Fix a RAW drive

    - by Claus Jørgensen
    Hi Basically I got the same problem as described in this thread. When I plug my HTC Hero Android Phone with USB into my Windows 7 computer I get a "Do you want to Scan and Fix" message. However, if I click "Scan and Fix", the USB instantly unplug itself, so that's no good. I've tried updating drivers from HTC with no luck. I've also tried running chkdisk from command-line with the message that it can't be used in RAW drives. This is really really annoying, and the SD card works just fine if I ignore the message, so I just want a way to disable/hide this message permanently. If anyone have some ideas how this can be done, please let me know. Thanks.

    Read the article

  • Disable laptop's display on boot when used with external display

    - by Ryan
    I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

    Read the article

  • HP 1210 Scan Button does nothing.

    - by Jack M.
    I have an HP 1210 all-in-one nightmare of a printer which has decided not to listen to the scan button anymore. I've dug into it, and see in the properties of the scanner in Windows XP that it says "No applications are registered for this event" under what to do when the Scan button is pressed. I've tried re-installing the HP software, didn't help. Updated the drivers off the website, and downgraded them to the ones on the CD, neither had an effect. Is there any way to tell Windows to just open the Scan/Cammera wizard when I press the Scan button on the printer? Windows XP SP3, if that matters.

    Read the article

  • Windows Server 2008 hangs up while booting

    - by Jim R
    Windows Server 2008 hangs up while booting after Windows update applied several updates. The server is a virtual instance on a Server 2008 Hyper-V host. Other virtual servers are fine, but have not been updated. The normal boot shows the horizontal barber poll forever. When I do a safe boot it also hangs up. With a "Please Wait..." after loading many '.sys' files. The last successfully loaded file listed is: '\Windows\system32\drivers\crcdisk.sys' That is the extent of what I have been able to determine.

    Read the article

  • RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

    - by Deepak Narwal
    Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

    Read the article

  • OpenSolaris with no gcc vs. Nexenta with no ext3

    - by Jake Wharton
    I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

    Read the article

  • File corruption after copying files in Windows 7 64 bit using two methods

    - by DustByte
    I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

    Read the article

  • Linux and ClickPads

    - by John
    I just got my Arch / Windows 7 dual-boot setup running... except for one thing. I have an HP dv6-3127dx laptop, which is an issue when it comes to Linux because it does not have a traditional touchpad, but a "ClickPad." This means where the left and right buttons exist, it is also sensitive to moving the pointer. The issue comes in when I try to steady the mouse with one finger, while clicking the left click with another, because the mouse freaks out. It's also an issue because it's not recognizing the right click whatsoever. I am currently using the default Synaptics drivers downloaded from pacman on Arch Linux, running Linux v2.6.36. EDIT: The question of course is, how can I fix this?

    Read the article

  • How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

    - by pratikk
    I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

    Read the article

  • Western Digital not recognized by Windows after power Outage on windows

    - by vikasde
    I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

    Read the article

  • PC doesn't select right monitor sometimes

    - by Madhur Ahuja
    I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

    Read the article

  • Unable to make my bios see my sata hdd

    - by Stefan
    I know there are many question about that, but I tried everything and I'm still not able to make my bios see my sata2 hdd. I've got a QDI motherbord with no sata port; only 2 ide ports. I had an old ide hdd, now i've removed it and bought a sata2 hdd. Since my pc has no sata slots i bouth a ide-to-sata adapter. So, i don't have any os installed on the new drive, and the old drive is removed. My problem is that I'm unable to see my hdd on bios. I suppose that my bios, since it's an old version, doesn't have sata drivers, but I don't know if I must install it and also I dont know how to do it. Anyone can help me?

    Read the article

  • Windows shuts down unexpectedly when waking up from sleep

    - by Kush
    I've been facing this issue since yesterday, whenever I put the computer into sleep mode and when I wake up, it takes me to boot menu with choices; start Windows normally, safe mode, etc. in short, it shuts down unexpectedly while waking up. I have my laptop dual booted with up-to-date Windows 7 SP1 (32-bit) and Ubuntu 10.10. This problem is not happening with Ubuntu. I googled the issue and went through this, this and this page. But, none of the threads were helpful to solve it. I've found that there's something to do with device drivers. What can be done to resolve the issue? Can SFC utility solve it if it is due to corrupt system files?

    Read the article

  • Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

    - by Breadtruck
    So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

    Read the article

  • How to fix choppy video with VLC player?

    - by Brian Ojeda
    When playing most movies in VLC player, the video feed is choppy. Furthermore, the sound is near perfect. Another catch is, this video issue wasn't always an issue. I use to play movies with no problem with video or sound. I can not pin point what has changed between the it use to work fine and the time it started being choppy though. I have an ASUS G73JW-A1. This system should be more than enough to handle the demand of playing HD videos. Movies that are normally effected are HD videos. These video range from 4 to 9 gigs. In addition, the videos are in MKV, MP4 (or M4V), and AVCHD (or M2TS) formats. I get the same results when playing move directly off my hard drive or off an external. Finally, all the drivers have been recently checked and updated if needed.

    Read the article

  • Does anyone have experience with BSODs while creating a universal image with FOG?

    - by Devator
    I want to create a Windows XP universal image to image our computers using FOG server. The FOG server part is running fine, however when creating a Windows XP universal image, it keeps crashing (BSOD) with the 0x000007b error. I believe this has todo with the Mass Storage drivers, I followed many tutorials, but each of them crashes with the 0x000007b error. FYI, I followed this tutorial (but couldn't download the files, the host is down). I was wondering if any of you had experience with this and knows how to solve my problem?

    Read the article

  • Backup VSS Issues

    - by MJ
    I've got this server, and we've been having VSS issues for quite awhile. We've tried every form of re-registering the VSS drivers we can think of. NTbackup won't run a system state backup vssadmin list writers doesn't list anything. We're getting VSS error 12302 in the event log. Has anyone ran into a situation like this before? We're thinking the next step, if possible, is a complete reinstall of the VSS. Any other ideas?

    Read the article

  • Building a new PC, Installing XP, blue screen of death

    - by Tim
    I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

    Read the article

  • Universal Windows XP With Ghost and Sysprep

    - by RobertPitt
    Hey I have an idea but im not sure whether it is possible and looking for advice on how to accomplish this. If i was to try and deploy Windows XP Sysprepped image from a Lenovo Thinkcentre 6073-CTO and tried to drop it onto a Dell Optiplex for instance I would get a BSOD due to the hardware change. What im looking to do is create a few images like so: Windows XP x86 SP3 (Sysprepped) Windows XP x64 SP3 (Sysprepped) ... So that we can use throughout the organization without having to create individual images per computer type. Is there anyway's to accomplish this such as some modification of files pre-ghost, removal a certain drivers pre-sysprep Any advice is appreciated.

    Read the article

  • Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

    - by oKtosiTe
    My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

    Read the article

  • PGP Desktop Whole disk Encryption paused on a toshiba ultrabook z935

    - by garg
    I have a Toshiba z930 Ultrabook with PGP Desktop installed for whole disk encryption. It installed correctly, and started encrypting but it stays paused. If I reboot, it shows me the PGP desktop username, password, domain screen. If I enter in my credentials, it allows me to get into windows but encryption remains paused. If I click on resume, it lets me enter a password, accepts it but then it doesn't do anything. One suspicious thing is that in the 'Select disk or partition to encrypt' box, it says, C: 120B fixed disk. Unknown Bus: TOSHIBA THNSNS12... Do I need to change something in the BIOS, or install any drivers so that it doesn't see it as an Unknown Bus?

    Read the article

  • Overclocking a nVIDIA GTX 660M GPU?

    - by heron1000
    I have a MSI GE60 0ND laptop with a GTX 660M GPU. When I play games like Minecraft or Portal 2, the core clock is stable at 835 MHz. Recently I tried to overclock it using MSI Afterburner but it wouldn't let me change the voltages or the clock speed no matter what I tried. Various Google searches yielded solutions that all didn't work. Is there any way I can overclock the GPU? Further Info: I have the nVIDIA 310.70 drivers and Windows 8.

    Read the article

  • How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

    - by koldovsky
    While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

    Read the article

  • RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

    - by Deepak Narwal
    Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

    Read the article

  • Can't access some websites with any browser

    - by Charles Kingsmill
    I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

    Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >