unknown fool - Page 147

Can only bring up one of two interfaces

- by mstaessen

I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

Read the article

MySQL won't start, reinstall fails on Ubuntu 12.04

- by Evils

My problem started yesterday night when I tried to change the my.cnf config on my ubuntu 12.04 x64 System. I simply tried to changed the bind-address parameter from 127.0.0.1 to 0.0.0.0. A simple restart after a reboot gave this error: stop: Unknown instance: start: Job failed to start I tried to start mysql then by using 'mysqld' which outputs this: 130701 11:05:59 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 130701 11:05:59 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 130701 11:05:59 InnoDB: The InnoDB memory heap is disabled 130701 11:05:59 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130701 11:05:59 InnoDB: Compressed tables use zlib 1.2.3.4 130701 11:05:59 InnoDB: Initializing buffer pool, size = 128.0M 130701 11:05:59 InnoDB: Completed initialization of buffer pool 130701 11:05:59 InnoDB: highest supported file format is Barracuda. 130701 11:05:59 InnoDB: Waiting for the background threads to start 130701 11:06:00 InnoDB: 5.5.31 started; log sequence number 1595675 130701 11:06:00 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130701 11:06:00 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130701 11:06:00 [Note] Server socket created on IP: '127.0.0.1'. 130701 11:06:00 [ERROR] Can't start server : Bind on unix socket: Permission denied 130701 11:06:00 [ERROR] Do you already have another mysqld server running on socket: /var/run/mysqld/mysqld.sock ? 130701 11:06:00 [ERROR] Aborting 130701 11:06:00 InnoDB: Starting shutdown... 130701 11:06:00 InnoDB: Shutdown completed; log sequence number 1595675 130701 11:06:00 [Note] mysqld: Shutdown complete Meanwhile I already tried to reinstall and purge the complete mysql package which results in another error which says that dpkg cant change the admins password. While this error appeared another error came with it. When trying to install something new with apt, it always says 'fopen: permission denied' right after it tries to update my man-db. This is my dmesg output: [ 6879.687998] type=1400 audit(1372669683.397:36): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=9336 comm="apparmor_parser" [ 6881.323215] init: mysql main process (9340) terminated with status 1 [ 6881.323316] init: mysql respawning too fast, stopped Any help will be appreciated as this is a productive server which renders useless without mysql.

Read the article

FTP script needs blank line

- by Ones and Zeroes

I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

Read the article

EXC_BAD_ACCESS and KERN_INVALID_ADDRESS after intiating a print sequence.

- by Edward M. Bergmann

MAC G4/1.5GHz/2GB/1TB+ OS10.4.11 Start up Volume has been erased/complete reinstall with updated software. Current problem only occurs when printing to an Epson Artisan 800 [USB as well as Ethernet connected] when using Macromedia FreeHand 10.0.1.67. All other apps/printers work fine. Memory has been removed/swapped/reinstalled several times, CPU was changed from 1.5GB to 1.3GB. Page(s) will print, but application quits within a second or two after selecting "print." Apple has never replied, Epson hasn't a clue, and I am befuddled!! Perhaps there is GURU out their who and see a bigger-better picture and understands how to interpret all of this stuff. If so, it would be a terrific pleasure to get a handle on how to cure this problem or get some A M M U N I T I O N to fire in the right direction. I thank you in advance. FreeHand 10 MAC OS10.4.11 unexpectedly quits after invoking a print command, the result: Date/Time: 2010-04-20 14:23:18.371 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: FreeHand 10 Path: /Applications/Macromedia FreeHand 10.0.1.67/FreeHand 10 Parent: WindowServer [1060] Version: 10.0.1.67 (10.0.1.67, Copyright © 1988-2002 Macromedia Inc. and its licensors. All rights reserved.) PID: 1217 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x07d7e000 Thread 0 Crashed: 0 <<00000000>> 0xffff8a60 __memcpy + 704 (cpu_capabilities.h:189) 1 FreeHand X 0x011d2994 0x1008000 + 1878420 2 FreeHand X 0x01081da4 0x1008000 + 499108 3 FreeHand X 0x010f5474 0x1008000 + 971892 4 FreeHand X 0x010d0278 0x1008000 + 819832 5 FreeHand X 0x010fa808 0x1008000 + 993288 6 FreeHand X 0x01113608 0x1008000 + 1095176 7 FreeHand X 0x01113748 0x1008000 + 1095496 8 FreeHand X 0x01099ebc 0x1008000 + 597692 9 FreeHand X 0x010fa358 0x1008000 + 992088 10 FreeHand X 0x010fa170 0x1008000 + 991600 11 FreeHand X 0x010f9830 0x1008000 + 989232 12 FreeHand X 0x01098678 0x1008000 + 591480 13 FreeHand X 0x010f7a5c 0x1008000 + 981596 Thread 1: 0 libSystem.B.dylib 0x90005dec syscall + 12 1 com.apple.OpenTransport 0x9ad015a0 BSD_waitevent + 44 2 com.apple.OpenTransport 0x9ad06360 CarbonSelectThreadFunc + 176 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 2: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad01e94 CarbonOperationThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 3: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad11df0 CarbonInetOperThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 4: 0 libSystem.B.dylib 0x90053f88 semaphore_timedwait_signal_trap + 8 1 libSystem.B.dylib 0x900707e8 pthread_cond_timedwait_relative_np + 556 2 ...ple.CoreServices.CarbonCore 0x90bf9330 TSWaitOnSemaphoreCommon + 176 3 ...ple.CoreServices.CarbonCore 0x90c012d0 TimerThread + 60 4 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 5: 0 libSystem.B.dylib 0x9001f48c select + 12 1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472 2 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 6: 0 libSystem.B.dylib 0x9002188c access + 12 1 ...e.print.framework.PrintCore 0x9169a620 CreateProxyURL(__CFURL const*) + 192 2 ...e.print.framework.PrintCore 0x9169a4f8 CreateOriginalPrinterProxyURL() + 80 3 ...e.print.framework.PrintCore 0x9169a034 CheckPrinterProxyVersion(OpaquePMPrinter*, __CFURL const*) + 192 4 ...e.print.framework.PrintCore 0x91699d94 PJCPrinterProxyCreateURL + 932 5 ...e.print.framework.PrintCore 0x916997bc PJCLaunchPrinterProxy(OpaquePMPrinter*, PMLaunchPCReason) + 32 6 ...e.print.framework.PrintCore 0x91699730 PJCLaunchPrinterProxyThread(void*) + 136 7 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 0 crashed with PPC Thread State 64: srr0: 0x00000000ffff8a60 srr1: 0x000000000200f030 vrsave: 0x00000000ff000000 cr: 0x24002244 xer: 0x0000000020000002 lr: 0x00000000011d2994 ctr: 0x00000000000003f6 r0: 0x0000000000000000 r1: 0x00000000bfffea60 r2: 0x0000000000000000 r3: 0x00000000083bb000 r4: 0x00000000083c0040 r5: 0x0000000000014d84 r6: 0x0000000000000010 r7: 0x0000000000000020 r8: 0x0000000000000030 r9: 0x0000000000000000 r10: 0x0000000000000060 r11: 0x0000000000000080 r12: 0x0000000007d7e000 r13: 0x0000000000000000 r14: 0x00000000005cbd26 r15: 0x0000000000000001 r16: 0x00000000017b03a0 r17: 0x0000000000000000 r18: 0x000000000068fa80 r19: 0x0000000000000001 r20: 0x0000000006c639c4 r21: 0x00000000006900f8 r22: 0x0000000006e09480 r23: 0x0000000006e0a250 r24: 0x0000000000000002 r25: 0x0000000000000000 r26: 0x00000000bfffed2c r27: 0x0000000006e05ce0 r28: 0x0000000000014d84 r29: 0x0000000000000000 r30: 0x0000000000014d84 r31: 0x00000000083bb000 Binary Images Description: 0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp 0x27f000 - 0x2ce3c7 CarbonLibpwpc PEF binary: CarbonLibpwpc 0x2ce3d0 - 0x2e66bd Apple;Carbon;Multimedia PEF binary: Apple;Carbon;Multimedia 0x2e7c00 - 0x2e998b Apple;Carbon;Networking PEF binary: Apple;Carbon;Networking 0x31ab10 - 0x31abb3 CFMPriv_QuickTime PEF binary: CFMPriv_QuickTime 0x31ac20 - 0x31ac97 CFMPriv_System PEF binary: CFMPriv_System 0x31af30 - 0x31b000 CFMPriv_CarbonSound PEF binary: CFMPriv_CarbonSound 0x31b080 - 0x31b153 CFMPriv_CommonPanels PEF binary: CFMPriv_CommonPanels 0x31b230 - 0x31b2eb CFMPriv_Help PEF binary: CFMPriv_Help 0x31b2f0 - 0x31b3ba CFMPriv_HIToolbox PEF binary: CFMPriv_HIToolbox 0x31b440 - 0x31b516 CFMPriv_HTMLRendering PEF binary: CFMPriv_HTMLRendering 0x31b550 - 0x31b602 CFMPriv_CoreFoundation PEF binary: CFMPriv_CoreFoundation 0x31b7f0 - 0x31b8a5 CFMPriv_DVComponentGlue PEF binary: CFMPriv_DVComponentGlue 0x31f760 - 0x31f833 CFMPriv_ImageCapture PEF binary: CFMPriv_ImageCapture 0x31f8c0 - 0x31f9a5 CFMPriv_NavigationServices PEF binary: CFMPriv_NavigationServices 0x31fa20 - 0x31faf6 CFMPriv_OpenScripting?MacBLib PEF binary: CFMPriv_OpenScripting?MacBLib 0x31fbd0 - 0x31fc8e CFMPriv_Print PEF binary: CFMPriv_Print 0x31fcb0 - 0x31fd7d CFMPriv_SecurityHI PEF binary: CFMPriv_SecurityHI 0x31fe00 - 0x31fee2 CFMPriv_SpeechRecognition PEF binary: CFMPriv_SpeechRecognition 0x31ff60 - 0x320033 CFMPriv_CarbonCore PEF binary: CFMPriv_CarbonCore 0x3200b0 - 0x320183 CFMPriv_OSServices PEF binary: CFMPriv_OSServices 0x320260 - 0x320322 CFMPriv_AE PEF binary: CFMPriv_AE 0x320330 - 0x3203f5 CFMPriv_ATS PEF binary: CFMPriv_ATS 0x320470 - 0x320547 CFMPriv_ColorSync PEF binary: CFMPriv_ColorSync 0x3205d0 - 0x3206b3 CFMPriv_FindByContent PEF binary: CFMPriv_FindByContent 0x320730 - 0x32080a CFMPriv_HIServices PEF binary: CFMPriv_HIServices 0x320880 - 0x320960 CFMPriv_LangAnalysis PEF binary: CFMPriv_LangAnalysis 0x3209f0 - 0x320ad6 CFMPriv_LaunchServices PEF binary: CFMPriv_LaunchServices 0x320bb0 - 0x320c87 CFMPriv_PrintCore PEF binary: CFMPriv_PrintCore 0x320c90 - 0x320d52 CFMPriv_QD PEF binary: CFMPriv_QD 0x320e50 - 0x320f39 CFMPriv_SpeechSynthesis PEF binary: CFMPriv_SpeechSynthesis 0x405000 - 0x497f7a PowerPlant Shared Library PEF binary: PowerPlant Shared Library 0x498000 - 0x4f0012 Player PEF binary: Player 0x4f1000 - 0x54a4c0 KodakCMSC PEF binary: KodakCMSC 0x6bd000 - 0x6eca10 <Unknown disk fragment> PEF binary: <Unknown disk fragment> 0x7fc000 - 0x7fdb8b xRes Palette Importc PEF binary: xRes Palette Importc 0x1008000 - 0x17770a5 FreeHand X PEF binary: FreeHand X 0x17770b0 - 0x17a6fe7 MW_MSL.Carbon.Shlb PEF binary: MW_MSL.Carbon.Shlb 0x17fb000 - 0x17fff03 Smudge PEF binary: Smudge 0x5ce6000 - 0x5cecebe PICT Import Export68 PEF binary: PICT Import Export68 0x5ced000 - 0x5d24267 PNG Import Exportr68 PEF binary: PNG Import Exportr68 0x5d25000 - 0x5d30dde Release To Layerswpc PEF binary: Release To Layerswpc 0x5d31000 - 0x5d37fd2 Roughen PEF binary: Roughen 0x5d38000 - 0x5d459ae Shadow PEF binary: Shadow 0x5d46000 - 0x5d4b0de Spiral PEF binary: Spiral 0x5d4c000 - 0x5d57f07 Targa Import Export8 PEF binary: Targa Import Export8 0x5d58000 - 0x5d8d959 TIFF Import Export68 PEF binary: TIFF Import Export68 0x5d93000 - 0x5da0f65 Color Utilities PEF binary: Color Utilities 0x5f62000 - 0x5f6e795 Mirror PEF binary: Mirror 0x5f6f000 - 0x5fbd656 HTML Export PEF binary: HTML Export 0x5fc8000 - 0x5fd442f Graphic Hose PEF binary: Graphic Hose 0x5fd5000 - 0x5fe4b5a BMP Import Exportr68 PEF binary: BMP Import Exportr68 0x5fe5000 - 0x60342d6 PDF Export PEF binary: PDF Export 0x6041000 - 0x6042f44 Fractalizej@ PEF binary: Fractalizej@ 0x6043000 - 0x6075214 Chart Tool™ PEF binary: Chart Tool™ 0x6076000 - 0x607d46d Bend PEF binary: Bend 0x607e000 - 0x60cda7b PDF Import PEF binary: PDF Import 0x60dc000 - 0x60e38f2 Photoshop ImportChartCursor PEF binary: Photoshop ImportChartCursor 0x60e4000 - 0x60eb9b1 3D Rotationp PEF binary: 3D Rotationp 0x60ec000 - 0x611b458 JPEG Import ExportANEL PEF binary: JPEG Import ExportANEL 0x611c000 - 0x613d89f GIF Import Export PEF binary: GIF Import Export 0x613e000 - 0x616d7f7 Flash Export PEF binary: Flash Export 0x616e000 - 0x6175d75 Fisheye Lens PEF binary: Fisheye Lens 0x6176000 - 0x6182343 IPTC File Info PEF binary: IPTC File Info 0x6184000 - 0x6193790 PEF binary: 0x6194000 - 0x61965e5 Photoshop Palette Import PEF binary: Photoshop Palette Import 0x6197000 - 0x619c5a4 Add PointsZ PEF binary: Add PointsZ 0x619d000 - 0x61ad92b Emboss PEF binary: Emboss 0x61ae000 - 0x61be6e1 AppleScript™ Xtrawpc PEF binary: AppleScript™ Xtrawpc 0x61bf000 - 0x61d16de Navigation PEF binary: Navigation 0x61d2000 - 0x61ff94e CorelDRAW 7-8 Import PEF binary: CorelDRAW 7-8 Import 0x620a000 - 0x620d7f1 Trap PEF binary: Trap 0x620e000 - 0x62149d4 Import RGB Color Table PEF binary: Import RGB Color Table 0x6215000 - 0x6217dfe Arc PEF binary: Arc 0x6218000 - 0x62211e3 Delete Empty Text Blocks PEF binary: Delete Empty Text Blocks 0x6222000 - 0x624c8da MIX Services PEF binary: MIX Services 0x7d0b000 - 0x7d37fff com.apple.print.framework.Print.Private 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI 0x7dbf000 - 0x7ddffff com.apple.print.PrintingCocoaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Plugins/PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs 0x7f05000 - 0x7f39fff com.epson.ijprinter.pde.PrintSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/PrintSetting.plugin/Contents/MacOS/PrintSetting 0x7f49000 - 0x8044fff com.epson.ijprinter.IJPFoundation 6.54 /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPFoundation.framework/Versions/A/IJPFoundation 0x809a000 - 0x80cdfff com.epson.ijprinter.pde.ColorManagement.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ColorManagement.plugin/Contents/MacOS/ColorManagement 0x80dd000 - 0x8110fff com.epson.ijprinter.pde.ExpandMargin.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExpandMargin.plugin/Contents/MacOS/ExpandMargin 0x8120000 - 0x8153fff com.epson.ijprinter.pde.ExtensionSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExtensionSetting.plugin/Contents/MacOS/ExtensionSetting 0x8163000 - 0x8196fff com.epson.ijprinter.pde.DoubleSidePrint.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/DoubleSidePrint.plugin/Contents/MacOS/DoubleSidePrint 0x81a6000 - 0x81bffff com.apple.print.PrintingTiogaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Frameworks/Print.framework/Versions/A/Plugins/PrintingTiogaPDEs.bundle/Contents/MacOS/PrintingTiogaPDEs 0x838f000 - 0x8397fff com.apple.print.converter.plugin 4.5 (163.8) /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter 0x78e00000 - 0x78e07fff libLW8Utils.dylib /System/Library/Printers/Libraries/libLW8Utils.dylib 0x79200000 - 0x7923ffff libLW8Converter.dylib /System/Library/Printers/Libraries/libLW8Converter.dylib 0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld 0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib 0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib 0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib 0x90aea000 - 0x90b5cfff IOKit /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib 0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90f92000 - 0x90fd4fff com.apple.CFNetwork 129.24 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore 0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib 0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security 0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib 0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib 0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent 0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib 0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib 0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib 0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x91d0c000 - 0x91deafff libxml2.2.dylib /usr/lib/libxml2.2.dylib 0x91e0a000 - 0x91e48fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91e4f000 - 0x91e4ffff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x91e51000 - 0x91f36fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x91f3e000 - 0x91f5dfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x91fc9000 - 0x92037fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92042000 - 0x920d7fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x920f1000 - 0x92679fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x926ac000 - 0x929d7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x92a07000 - 0x92af5fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x92af8000 - 0x92b80fff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x92bc1000 - 0x92df4fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x93714000 - 0x93734fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib 0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9477d000 - 0x9478cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib 0x94794000 - 0x947a1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib 0x947a7000 - 0x947c6fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib 0x947e7000 - 0x94800fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib 0x94807000 - 0x94b3afff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x94c22000 - 0x94c93fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib 0x94e09000 - 0x94f39fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook 0x94fcc000 - 0x94fdbfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers 0x94fe3000 - 0x95010fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x95017000 - 0x95027fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib 0x9502b000 - 0x9505afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib 0x9506a000 - 0x95087fff libresolv.9.dylib /usr/lib/libresolv.9.dylib 0x9acff000 - 0x9ad1dfff com.apple.OpenTransport 2.0 /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport 0x9ad98000 - 0x9ad99fff com.apple.iokit.dvcomponentglue 1.7.9 /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue 0x9b1db000 - 0x9b1f2fff libCFilter.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCFilter.A.dylib 0x9c69b000 - 0x9c6bdfff libmx.A.dylib /usr/lib/libmx.A.dylib 0xeab00000 - 0xeab25fff libConverter.dylib /System/Library/Printers/Libraries/libConverter.dylib Model: PowerMac3,1, BootROM 4.2.8f1, 1 processors, PowerPC G4 (3.3), 1.3 GHz, 2 GB Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333 Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333 Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333 Memory Module: DIMM3/J24, 512 MB, SDRAM, PC133-333 Modem: Spring, UCJ, V.90, 3.0F, APPLE VERSION 0001, 4/7/1999 Network Service: Built-in Ethernet, Ethernet, en0 PCI Card: SeriTek/1V2E2 v.5.1.3,11/22/05, 23:47:18, ata, SLOT-B PCI Card: pci-bridge, pci, SLOT-C PCI Card: firewire, ieee1394, 2x8 PCI Card: usb, usb, 2x9 PCI Card: usb, usb, 2x9 PCI Card: pcie55,2928, 2x9 PCI Card: ATTO,ExpressPCIPro, scsi, SLOT-D Parallel ATA Device: MATSHITADVD-ROM SR-8585 Parallel ATA Device: IOMEGA ZIP 100 ATAPI USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMic USB audio system, Griffin Technology, Inc, Up to 12 Mb/sec, 500 mA USB Device: USB Storage Device, Generic, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 MFP, EPSON, Up to 12 Mb/sec, 500 mA USB Device: DYMO LabelWriter Twin Turbo, DYMO, Up to 12 Mb/sec, 500 mA USB Device: USB 2.0 CD + HDD, DMI, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMate, USB To ADB Adaptor, Griffin Technology, Inc., Up to 1.5 Mb/sec, 500 mA USB Device: Hub in Apple Pro Keyboard, Alps Electric, Up to 12 Mb/sec, 500 mA USB Device: Griffin PowerMate, Griffin Technology, Inc., Up to 1.5 Mb/sec, 100 mA

Read the article

Design by Contract with Microsoft .Net Code Contract

- by Fredrik N

I have done some talks on different events and summits about Defensive Programming and Design by Contract, last time was at Cornerstone’s Developer Summit 2010. Next time will be at SweNug (Sweden .Net User Group). I decided to write a blog post about of some stuffs I was talking about. Users are a terrible thing! Protect your self from them ”Human users have a gift for doing the worst possible thing at the worst possible time.” – Michael T. Nygard, Release It! The kind of users Michael T. Nygard are talking about is the users of a system. We also have users that uses our code, the users I’m going to focus on is the users of our code. Me and you and another developers. “Any fool can write code that a computer can understand. Good programmers write code that humans can understand.” – Martin Fowler Good programmers also writes code that humans know how to use, good programmers also make sure software behave in a predictable manner despise inputs or user actions. Design by Contract Design by Contract (DbC) is a way for us to make a contract between us (the code writer) and the users of our code. It’s about “If you give me this, I promise to give you this”. It’s not about business validations, that is something completely different that should be part of the domain model. DbC is to make sure the users of our code uses it in a correct way, and that we can rely on the contract and write code in a way where we know that the users will follow the contract. It will make it much easier for us to write code with a contract specified. Something like the following code is something we may see often: public void DoSomething(Object value) { value.DoIKnowThatICanDoThis(); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Where “value” can be uses directly or passed to other methods and later be used. What some of us can easily forget here is that the “value” can be “null”. We will probably not passing a null value, but someone else that uses our code maybe will do it. I think most of you (including me) have passed “null” into a method because you don’t know if the argument need to be specified to a valid value etc. I bet most of you also have got the “Null reference exception”. Sometimes this “Null reference exception” can be hard and take time to fix, because we need to search among our code to see where the “null” value was passed in etc. Wouldn’t it be much better if we can as early as possible specify that the value can’t not be null, so the users of our code also know it when the users starts to use our code, and before run time execution of the code? This is where DbC comes into the picture. We can use DbC to specify what we need, and by doing so we can rely on the contract when we write our code. So the code above can actually use the DoIKnowThatICanDoThis() method on the value object without being worried that the “value” can be null. The contract between the users of the code and us writing the code, says that the “value” can’t be null. Pre- and Postconditions When working with DbC we are specifying pre- and postconditions. Precondition is a condition that should be met before a query or command is executed. An example of a precondition is: “The Value argument of the method can’t be null”, and we make sure the “value” isn’t null before the method is called. Postcondition is a condition that should be met when a command or query is completed, a postcondition will make sure the result is correct. An example of a postconditon is “The method will return a list with at least 1 item”. Commands an Quires When using DbC, we need to know what a Command and a Query is, because some principles that can be good to follow are based on commands and queries. A Command is something that will not return anything, like the SQL’s CREATE, UPDATE and DELETE. There are two kinds of Commands when using DbC, the Creation commands (for example a Constructor), and Others. Others can for example be a Command to add a value to a list, remove or update a value etc. //Creation commands public Stack(int size) //Other commands public void Push(object value); public void Remove(); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } A Query, is something that will return something, for example an Attribute, Property or a Function, like the SQL’s SELECT. There are two kinds of Queries, the Basic Queries (Quires that aren’t based on another queries), and the Derived Queries, queries that is based on another queries. Here is an example of queries of a Stack: //Basic Queries public int Count; public object this[int index] { get; } //Derived Queries //Is related to Count Query public bool IsEmpty() { return Count == 0; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To understand about some principles that are good to follow when using DbC, we need to know about the Commands and different Queries. The 6 Principles When working with DbC, it’s advisable to follow some principles to make it easier to define and use contracts. The following DbC principles are: Separate commands and queries. Separate basic queries from derived queries. For each derived query, write a postcondition that specifies what result will be returned, in terms of one or more basic queries. For each command, write a postcondition that specifies the value of every basic query. For every query and command, decide on a suitable precondition. Write invariants to define unchanging properties of objects. Before I will write about each of them I want you to now that I’m going to use .Net 4.0 Code Contract. I will in the rest of the post uses a simple Stack (Yes I know, .Net already have a Stack class) to give you the basic understanding about using DbC. A Stack is a data structure where the first item in, will be the first item out. Here is a basic implementation of a Stack where not contract is specified yet: public class Stack { private object[] _array; //Basic Queries public uint Count; public object this[uint index] { get { return _array[index]; } set { _array[index] = value; } } //Derived Queries //Is related to Count Query public bool IsEmpty() { return Count == 0; } //Is related to Count and this[] Query public object Top() { return this[Count]; } //Creation commands public Stack(uint size) { Count = 0; _array = new object[size]; } //Other commands public void Push(object value) { this[++Count] = value; } public void Remove() { this[Count] = null; Count--; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: The Stack is implemented in a way to demonstrate the use of Code Contract in a simple way, the implementation may not look like how you would implement it, so don’t think this is the perfect Stack implementation, only used for demonstration. Before I will go deeper into the principles I will simply mention how we can use the .Net Code Contract. I mention before about pre- and postcondition, is about “Require” something and to “Ensure” something. When using Code Contract, we will use a static class called “Contract” and is located in he “System.Diagnostics.Contracts” namespace. The contract must be specified at the top or our member statement block. To specify a precondition with Code Contract we uses the Contract.Requires method, and to specify a postcondition, we uses the Contract.Ensure method. Here is an example where both a pre- and postcondition are used: public object Top() { Contract.Requires(Count > 0, "Stack is empty"); Contract.Ensures(Contract.Result<object>() == this[Count]); return this[Count]; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The contract above requires that the Count is greater than 0, if not we can’t get the item at the Top of a Stack. We also Ensures that the results (By using the Contract.Result method, we can specify a postcondition that will check if the value returned from a method is correct) of the Top query is equal to this[Count]. 1. Separate Commands and Queries When working with DbC, it’s important to separate Command and Quires. A method should either be a command that performs an Action, or returning information to the caller, not both. By asking a question the answer shouldn’t be changed. The following is an example of a Command and a Query of a Stack: public void Push(object value) public object Top() .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The Push is a command and will not return anything, just add a value to the Stack, the Top is a query to get the item at the top of the stack. 2. Separate basic queries from derived queries There are two different kinds of queries, the basic queries that doesn’t rely on another queries, and derived queries that uses a basic query. The “Separate basic queries from derived queries” principle is about about that derived queries can be specified in terms of basic queries. So this principles is more about recognizing that a query is a derived query or a basic query. It will then make is much easier to follow the other principles. The following code shows a basic query and a derived query: //Basic Queries public uint Count; //Derived Queries //Is related to Count Query public bool IsEmpty() { return Count == 0; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We can see that IsEmpty will use the Count query, and that makes the IsEmpty a Derived query. 3. For each derived query, write a postcondition that specifies what result will be returned, in terms of one or more basic queries. When the derived query is recognize we can follow the 3ed principle. For each derived query, we can create a postcondition that specifies what result our derived query will return in terms of one or more basic queries. Remember that DbC is about contracts between the users of the code and us writing the code. So we can’t use demand that the users will pass in a valid value, we must also ensure that we will give the users what the users wants, when the user is following our contract. The IsEmpty query of the Stack will use a Count query and that will make the IsEmpty a Derived query, so we should now write a postcondition that specified what results will be returned, in terms of using a basic query and in this case the Count query, //Basic Queries public uint Count; //Derived Queries public bool IsEmpty() { Contract.Ensures(Contract.Result<bool>() == (Count == 0)); return Count == 0; } The Contract.Ensures is used to create a postcondition. The above code will make sure that the results of the IsEmpty (by using the Contract.Result to get the result of the IsEmpty method) is correct, that will say that the IsEmpty will be either true or false based on Count is equal to 0 or not. The postcondition are using a basic query, so the IsEmpty is now following the 3ed principle. We also have another Derived Query, the Top query, it will also need a postcondition and it uses all basic queries. The Result of the Top method must be the same value as the this[] query returns. //Basic Queries public uint Count; public object this[uint index] { get { return _array[index]; } set { _array[index] = value; } } //Derived Queries //Is related to Count and this[] Query public object Top() { Contract.Ensures(Contract.Result<object>() == this[Count]); return this[Count]; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 4. For each command, write a postcondition that specifies the value of every basic query. For each command we will create a postconditon that specifies the value of basic queries. If we look at the Stack implementation we will have three Commands, one Creation command, the Constructor, and two others commands, Push and Remove. Those commands need a postcondition and they should include basic query to follow the 4th principle. //Creation commands public Stack(uint size) { Contract.Ensures(Count == 0); Count = 0; _array = new object[size]; } //Other commands public void Push(object value) { Contract.Ensures(Count == Contract.OldValue<uint>(Count) + 1); Contract.Ensures(this[Count] == value); this[++Count] = value; } public void Remove() { Contract.Ensures(Count == Contract.OldValue<uint>(Count) - 1); this[Count] = null; Count--; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see the Create command will Ensures that Count will be 0 when the Stack is created, when a Stack is created there shouldn’t be any items in the stack. The Push command will take a value and put it into the Stack, when an item is pushed into the Stack, the Count need to be increased to know the number of items added to the Stack, and we must also make sure the item is really added to the Stack. The postconditon of the Push method will make sure the that old value of the Count (by using the Contract.OldValue we can get the value a Query has before the method is called) plus 1 will be equal to the Count query, this is the way we can ensure that the Push will increase the Count with one. We also make sure the this[] query will now contain the item we pushed into the Stack. The Remove method must make sure the Count is decreased by one when the top item is removed from the Stack. The Commands is now following the 4th principle, where each command now have a postcondition that used the value of basic queries. Note: The principle says every basic Query, the Remove only used one Query the Count, it’s because this command can’t use the this[] query because an item is removed, so the only way to make sure an item is removed is to just use the Count query, so the Remove will still follow the principle. 5. For every query and command, decide on a suitable precondition. We have now focused only on postcondition, now time for some preconditons. The 5th principle is about deciding a suitable preconditon for every query and command. If we starts to look at one of our basic queries (will not go through all Queries and commands here, just some of them) the this[] query, we can’t pass an index that is lower then 1 (.Net arrays and list are zero based, but not the stack in this blog post ;)) and the index can’t be lesser than the number of items in the stack. So here we will need a preconditon. public object this[uint index] { get { Contract.Requires(index >= 1); Contract.Requires(index <= Count); return _array[index]; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Think about the Contract as an documentation about how to use the code in a correct way, so if the contract could be specified elsewhere (not part of the method body), we could simply write “return _array[index]” and there is no need to check if index is greater or lesser than Count, because that is specified in a “contract”. The implementation of Code Contract, requires that the contract is specified in the code. As a developer I would rather have this contract elsewhere (Like Spec#) or implemented in a way Eiffel uses it as part of the language. Now when we have looked at one Query, we can also look at one command, the Remove command (You can see the whole implementation of the Stack at the end of this blog post, where precondition is added to more queries and commands then what I’m going to show in this section). We can only Remove an item if the Count is greater than 0. So we can write a precondition that will require that Count must be greater than 0. public void Remove() { Contract.Requires(Count > 0); Contract.Ensures(Count == Contract.OldValue<uint>(Count) - 1); this[Count] = null; Count--; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 6. Write invariants to define unchanging properties of objects. The last principle is about making sure the object are feeling great! This is done by using invariants. When using Code Contract we can specify invariants by adding a method with the attribute ContractInvariantMethod, the method must be private or public and can only contains calls to Contract.Invariant. To make sure the Stack feels great, the Stack must have 0 or more items, the Count can’t never be a negative value to make sure each command and queries can be used of the Stack. Here is our invariant for the Stack object: [ContractInvariantMethod] private void ObjectInvariant() { Contract.Invariant(Count >= 0); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: The ObjectInvariant method will be called every time after a Query or Commands is called. Here is the full example using Code Contract: public class Stack { private object[] _array; //Basic Queries public uint Count; public object this[uint index] { get { Contract.Requires(index >= 1); Contract.Requires(index <= Count); return _array[index]; } set { Contract.Requires(index >= 1); Contract.Requires(index <= Count); _array[index] = value; } } //Derived Queries //Is related to Count Query public bool IsEmpty() { Contract.Ensures(Contract.Result<bool>() == (Count == 0)); return Count == 0; } //Is related to Count and this[] Query public object Top() { Contract.Requires(Count > 0, "Stack is empty"); Contract.Ensures(Contract.Result<object>() == this[Count]); return this[Count]; } //Creation commands public Stack(uint size) { Contract.Requires(size > 0); Contract.Ensures(Count == 0); Count = 0; _array = new object[size]; } //Other commands public void Push(object value) { Contract.Requires(value != null); Contract.Ensures(Count == Contract.OldValue<uint>(Count) + 1); Contract.Ensures(this[Count] == value); this[++Count] = value; } public void Remove() { Contract.Requires(Count > 0); Contract.Ensures(Count == Contract.OldValue<uint>(Count) - 1); this[Count] = null; Count--; } [ContractInvariantMethod] private void ObjectInvariant() { Contract.Invariant(Count >= 0); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Summary By using Design By Contract we can make sure the users are using our code in a correct way, and we must also make sure the users will get the expected results when they uses our code. This can be done by specifying contracts. To make it easy to use Design By Contract, some principles may be good to follow like the separation of commands an queries. With .Net 4.0 we can use the Code Contract feature to specify contracts.

Read the article

How to get sound on macbook pro 4,1

- by Thomas

I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

Read the article

OSB/OSR/OER in One Domain - QName violates loader constraints

- by John Graves

For demos, testing and prototyping, I wanted a single domain which contained three servers:OSB - Oracle Service BusOSR - Oracle Service RegistryOER - Oracle Enterprise Repository These three can work together to help with service governance in an enterprise. When building out the domain, I found errors in the OSR server due to some conflicting classes from the OSB. This wouldn't be an issue if each server was given a unique classpath setting with the node manager, but I was having the node manager use the standard startup scripts. The domain's bin/setDomainEnv.sh script has a large set of extra libraries added for OSB which look like this: if [ "${POST_CLASSPATH}" != "" ] ; then POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar${CLASSPATHSEP}${POST_CLASSPATH}" export POST_CLASSPATH else POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar" export POST_CLASSPATH fi if [ "${PRE_CLASSPATH}" != "" ] ; then PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar${CLASSPATHSEP}${PRE_CLASSPATH}" export PRE_CLASSPATH else PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar" export PRE_CLASSPATH fi POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}/oracle/fmwhome/Oracle_OSB1/soa/modules/oracle.soa.common.adapters_11.1.1/oracle.soa.common.adapters.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/version.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/alsb.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-ant.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-common.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-core.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-dameon.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/classes${CLASSPATHSEP}\ ${ALSB_HOME}/lib/external/log4j_1.2.8.jar${CLASSPATHSEP}\ ${DOMAIN_HOME}/config/osb" I didn't take the time to sort out exactly which jar was causing the problem, but I simply surrounded this block with a conditional statement: if [ "${SERVER_NAME}" == "osr_server1" ] ; then POST_CLASSPATH=""else if [ "${POST_CLASSPATH}" != "" ] ; then POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar${CLASSPATHSEP}${POST_CLASSPATH}" export POST_CLASSPATH else POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar" export POST_CLASSPATH fi if [ "${PRE_CLASSPATH}" != "" ] ; then PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar${CLASSPATHSEP}${PRE_CLASSPATH}" export PRE_CLASSPATH else PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar" export PRE_CLASSPATH fi POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}/oracle/fmwhome/Oracle_OSB1/soa/modules/oracle.soa.common.adapters_11.1.1/oracle.soa.common.adapters.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/version.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/alsb.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-ant.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-common.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-core.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-dameon.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/classes${CLASSPATHSEP}\ ${ALSB_HOME}/lib/external/log4j_1.2.8.jar${CLASSPATHSEP}\ ${DOMAIN_HOME}/config/osb" fi I could have also just done an if [ ${SERVER_NAME} = "osb_server1" ], but I would have also had to include the AdminServer because they are needed there too. Since the oer_server1 didn't mind, I did the negative case as shown above. To help others find this post, I'm including the error that was reported in the OSR server before I made this change. ####<Mar 30, 2012 4:20:28 PM EST> <Error> <HTTP> <localhost.localdomain> <osr_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:30e96542:13662023753:-8000-000000000000001c> <1333084828916> <BEA-101017> <[ServletContext@470316600[app:registry module:registry.war path:/registry spec-version:null]] Root cause of ServletException. java.lang.LinkageError: Class javax/xml/namespace/QName violates loader constraints at com.idoox.wsdl.extensions.PopulatedExtensionRegistry.<init>(PopulatedExtensionRegistry.java:84) at com.idoox.wsdl.factory.WSDLFactoryImpl.newDefinition(WSDLFactoryImpl.java:61) at com.idoox.wsdl.xml.WSDLReaderImpl.parseDefinitions(WSDLReaderImpl.java:419) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:309) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:272) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:198) at com.idoox.wsdl.util.WSDLUtil.readWSDL(WSDLUtil.java:126) at com.systinet.wasp.admin.PackageRepositoryImpl.validateServicesNamespaceAndName(PackageRepositoryImpl.java:885) at com.systinet.wasp.admin.PackageRepositoryImpl.registerPackage(PackageRepositoryImpl.java:807) at com.systinet.wasp.admin.PackageRepositoryImpl.updateDir(PackageRepositoryImpl.java:611) at com.systinet.wasp.admin.PackageRepositoryImpl.updateDir(PackageRepositoryImpl.java:643) at com.systinet.wasp.admin.PackageRepositoryImpl.update(PackageRepositoryImpl.java:553) at com.systinet.wasp.admin.PackageRepositoryImpl.init(PackageRepositoryImpl.java:242) at com.idoox.wasp.ModuleRepository.loadModules(ModuleRepository.java:198) at com.systinet.wasp.WaspImpl.boot(WaspImpl.java:383) at org.systinet.wasp.Wasp.init(Wasp.java:151) at com.systinet.transport.servlet.server.Servlet.init(Unknown Source) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:244) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3732) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Read the article

Out of disk space - /boot at 100%

- by uvasal

My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

Read the article

Editing sqlcmdvariable nodes in SSDT Publish Profile files using msbuild

- by jamiet

Publish profile files are a new feature of SSDT database projects that enable you to package up all environment-specific properties into a single file for use at publish time; I have written about them before at Publish Profile Files in SQL Server Data Tools (SSDT) and if it wasn’t obvious from that blog post, I’m a big fan! As I have used Publish Profile files more and more I have realised that there may be times when you need to edit those Publish profile files during your build process, you may think of such an operation as a kind of pre-processor step. In my case I have a sqlcmd variable called DeployTag, it holds a value representing the current build number that later gets inserted into a table using a Post-Deployment script (that’s a technique that I wrote about in Implementing SQL Server solutions using Visual Studio 2010 Database Projects – a compendium of project experiences – search for “Putting a build number into the DB”). Here are the contents of my Publish Profile file (simplified for demo purposes) : Notice that DeployTag defaults to “UNKNOWN”. On my current project we are using msbuild scripts to control what gets built and what I want to do is take the build number from our build engine and edit the Publish profile files accordingly. Here is the pertinent portion of the the msbuild script I came up with to do that: <ItemGroup> <Namespaces Include="myns"> <Prefix>myns</Prefix> <Uri>http://schemas.microsoft.com/developer/msbuild/2003</Uri> </Namespaces> </ItemGroup> <Target Name="UpdateBuildNumber"> <ItemGroup> <SSDTPublishFiles Include="$(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml" /> </ItemGroup> <MSBuild.ExtensionPack.Xml.XmlFile Condition="%(SSDTPublishFiles.Identity) != ''" TaskAction="UpdateElement" File="%(SSDTPublishFiles.Identity)" Namespaces="@(Namespaces)" XPath="//myns:SqlCmdVariable[@Include='DeployTag']/myns:Value" InnerText="$(BuildNumber)"/> </Target> The important bits here are the definition of the namespace http://schemas.microsoft.com/developer/msbuild/2003: and the XPath expression //myns:SqlCmdVariable[@Include='DeployTag']/myns:Value: Some extra info: I use a fantastic tool called XMLPad to discover/test XPath expressions, read more at XMLPad – a new tool in my developer utility belt MSBuild.ExtensionPack.Xml.XmlFile is a msbuild task used to edit XML files and is available from Mike Fourie’s MSBuild Extension Pack I’m using a property called $(BuildNumber) to hold the value to substitute into the file and also $(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml to define an ItemGroup all of my Publish Profile files. Populating those properties is basic msbuild stuff and is therefore outside the scope of this blog post however if you want to learn more check out MSBuild properties & How To: Use Wildcards to Build All Files in a Directory. Hope this is useful! @Jamiet

Read the article

Do Not Optimize Without Measuring

- by Alois Kraus

Recently I had to do some performance work which included reading a lot of code. It is fascinating with what ideas people come up to solve a problem. Especially when there is no problem. When you look at other peoples code you will not be able to tell if it is well performing or not by reading it. You need to execute it with some sort of tracing or even better under a profiler. The first rule of the performance club is not to think and then to optimize but to measure, think and then optimize. The second rule is to do this do this in a loop to prevent slipping in bad things for too long into your code base. If you skip for some reason the measure step and optimize directly it is like changing the wave function in quantum mechanics. This has no observable effect in our world since it does represent only a probability distribution of all possible values. In quantum mechanics you need to let the wave function collapse to a single value. A collapsed wave function has therefore not many but one distinct value. This is what we physicists call a measurement. If you optimize your application without measuring it you are just changing the probability distribution of your potential performance values. Which performance your application actually has is still unknown. You only know that it will be within a specific range with a certain probability. As usual there are unlikely values within your distribution like a startup time of 20 minutes which should only happen once in 100 000 years. 100 000 years are a very short time when the first customer tries your heavily distributed networking application to run over a slow WIFI network… What is the point of this? Every programmer/architect has a mental performance model in his head. A model has always a set of explicit preconditions and a lot more implicit assumptions baked into it. When the model is good it will help you to think of good designs but it can also be the source of problems. In real world systems not all assumptions of your performance model (implicit or explicit) hold true any longer. The only way to connect your performance model and the real world is to measure it. In the WIFI example the model did assume a low latency high bandwidth LAN connection. If this assumption becomes wrong the system did have a drastic change in startup time. Lets look at a example. Lets assume we want to cache some expensive UI resource like fonts objects. For this undertaking we do create a Cache class with the UI themes we want to support. Since Fonts are expensive objects we do create it on demand the first time the theme is requested. A simple example of a Theme cache might look like this: using System; using System.Collections.Generic; using System.Drawing; struct Theme { public Color Color; public Font Font; } static class ThemeCache { static Dictionary<string, Theme> _Cache = new Dictionary<string, Theme> { {"Default", new Theme { Color = Color.AliceBlue }}, {"Theme12", new Theme { Color = Color.Aqua }}, }; public static Theme Get(string theme) { Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } return cached; } } class Program { static void Main(string[] args) { Theme item = ThemeCache.Get("Theme12"); item = ThemeCache.Get("Theme12"); } } This cache does create font objects only once since on first retrieve of the Theme object the font is added to the Theme object. When we let the application run it should print “Creating new font” only once. Right? Wrong! The vigilant readers have spotted the issue already. The creator of this cache class wanted to get maximum performance. So he decided that the Theme object should be a value type (struct) to not put too much pressure on the garbage collector. The code Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } does work with a copy of the value stored in the dictionary. This means we do mutate a copy of the Theme object and return it to our caller. But the original Theme object in the dictionary will have always null for the Font field! The solution is to change the declaration of struct Theme to class Theme or to update the theme object in the dictionary. Our cache as it is currently is actually a non caching cache. The funny thing was that I found out with a profiler by looking at which objects where finalized. I found way too many font objects to be finalized. After a bit debugging I found the allocation source for Font objects was this cache. Since this cache was there for years it means that the cache was never needed since I found no perf issue due to the creation of font objects. the cache was never profiled if it did bring any performance gain. to make the cache beneficial it needs to be accessed much more often. That was the story of the non caching cache. Next time I will write something something about measuring.

Read the article

ct.sym steals the ASM class

- by Geertjan

Some mild consternation on the Twittersphere yesterday. Marcus Lagergren not being able to find the ASM classes in JDK 8 in NetBeans IDE: And there's no such problem in Eclipse (and apparently in IntelliJ IDEA). Help, does NetBeans (despite being incredibly awesome) suck, after all? The truth of the matter is that there's something called "ct.sym" in the JDK. When javac is compiling code, it doesn't link against rt.jar. Instead, it uses a special symbol file lib/ct.sym with class stubs. Internal JDK classes are not put in that symbol file, since those are internal classes. You shouldn't want to use them, at all. However, what if you're Marcus Lagergren who DOES need these classes? I.e., he's working on the internal JDK classes and hence needs to have access to them. Fair enough that the general Java population can't access those classes, since they're internal implementation classes that could be changed anytime and one wouldn't want all unknown clients of those classes to start breaking once changes are made to the implementation, i.e., this is the rt.jar's internal class protection mechanism. But, again, we're now Marcus Lagergen and not the general Java population. For the solution, read Jan Lahoda, NetBeans Java Editor guru, here: https://netbeans.org/bugzilla/show_bug.cgi?id=186120 In particular, take note of this: AFAIK, the ct.sym is new in JDK6. It contains stubs for all classes that existed in JDK5 (for compatibility with existing programs that would use private JDK classes), but does not contain implementation classes that were introduced in JDK6 (only API classes). This is to prevent application developers to accidentally use JDK's private classes (as such applications would be unportable and may not run on future versions of JDK). Note that this is not really a NB thing - this is the behavior of javac from the JDK. I do not know about any way to disable this except deleting ct.sym or the option mentioned above. Regarding loading the classes: JVM uses two classpath's: classpath and bootclasspath. rt.jar is on the bootclasspath and has precedence over anything on the "custom" classpath, which is used by the application. The usual way to override classes on bootclasspath is to start the JVM with "-Xbootclasspath/p:" option, which prepends the given jars (and presumably also directories) to bootclasspath. Hence, let's take the first option, the simpler one, and simply delete the "ct.sym" file. Again, only because we need to work with those internal classes as developers of the JDK, not because we want to hack our way around "ct.sym", which would mean you'd not have portable code at the end of the day. Go to the JDK 8 lib folder and you'll find the file: Delete it. Start NetBeans IDE again, either on JDK 7 or JDK 8, doesn't make a difference for these purposes, create a new Java application (or use an existing one), make sure you have set the JDK above as the JDK of the application, and hey presto: The above obviously assumes you have a build of JDK 8 that actually includes the ASM package. And below you can see that not only are the classes found but my build succeeded, even though I'm using internal JDK classes. The yellow markings in the sidebar mean that the classes are imported but not used in the code, where normally, if I hadn't removed "ct.sym", I would have seen red error marking instead, and the code wouldn't have compiled. Note: I've tried setting "-XDignore.symbol.file" in "netbeans.conf" and in other places, but so far haven't got that to work. Simply deleting the "ct.sym" file (or back it up somewhere and put it back when needed) is quite clearly the most straightforward solution. Ultimately, if you want to be able to use those internal classes while still having portable code, do you know what you need to do? You need to create a JDK bug report stating that you need an internal class to be added to "ct.sym". Probably you'll get a motivation back stating WHY that internal class isn't supposed to be used externally. There must be a reason why those classes aren't available for external usage, otherwise they would have been added to "ct.sym". So, now the only remaining question is why the Eclipse compiler doesn't hide the internal JDK classes. Apparently the Eclipse compiler ignores the "ct.sym" file. In other words, at the end of the day, far from being a bug in NetBeans... we have now found a (pretty enormous, I reckon) bug in Eclipse. The Eclipse compiler does not protect you from using internal JDK classes and the code that you create in Eclipse may not work with future releases of the JDK, since the JDK team is simply going to be changing those classes that are not found in the "ct.sym" file while assuming (correctly, thanks to the presence of "ct.sym" mechanism) that no code in the world, other than JDK code, is tied to those classes.

Read the article

Cant get lm-sensors to load ATI Radeon temp or fan

- by woody

New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

Read the article

Developing Schema Compare for Oracle (Part 3): Ghost Objects

- by Simon Cooper

In the previous blog post, I covered how we solved the problem of dependencies between objects and between schemas. However, that isn’t the end of the issue. The dependencies algorithm I described works when you’re querying live databases and you can get dependencies for a particular schema direct from the server, and that’s all well and good. To throw a (rather large) spanner in the works, Schema Compare also has the concept of a snapshot, which is a read-only compressed XML representation of a selection of schemas that can be compared in the same way as a live database. This can be useful for keeping historical records or a baseline of a database schema, or comparing a schema on a computer that doesn’t have direct access to the database. So, how do snapshots interact with dependencies? Inter-database dependencies don't pose an issue as we store the dependencies in the snapshot. However, comparing a snapshot to a live database with cross-schema dependencies does cause a problem; what if the live database has a dependency to an object that does not exist in the snapshot? Take a basic example schema, where you’re only populating SchemaA: SOURCE TARGET (using snapshot) CREATE TABLE SchemaA.Table1 ( Col1 NUMBER REFERENCES SchemaB.Table1(col1)); CREATE TABLE SchemaA.Table1 ( Col1 VARCHAR2(100)); CREATE TABLE SchemaB.Table1 ( Col1 NUMBER PRIMARY KEY); CREATE TABLE SchemaB.Table1 ( Col1 VARCHAR2(100)); In this case, we want to generate a sync script to synchronize SchemaA.Table1 on the database represented by the snapshot. When taking a snapshot, database dependencies are followed, but because you’re not comparing it to anything at the time, the comparison dependencies algorithm described in my last post cannot be used. So, as you only take a snapshot of SchemaA on the target database, SchemaB.Table1 will not be in the snapshot. If this snapshot is then used to compare against the above source schema, SchemaB.Table1 will be included in the source, but the object will not be found in the target snapshot. This is the same problem that was solved with comparison dependencies, but here we cannot use the comparison dependencies algorithm as the snapshot has not got any information on SchemaB! We've now hit quite a big problem - we’re trying to include SchemaB.Table1 in the target, but we simply do not know the status of this object on the database the snapshot was taken from; whether it exists in the database at all, whether it’s the same as the target, whether it’s different... What can we do about this sorry state of affairs? Well, not a lot, it would seem. We can’t query the original database, as it may not be accessible, and we cannot assume any default state as it could be wrong and break the script (and we currently do not have a roll-back mechanism for failed synchronizes). The only way to fix this properly is for the user to go right back to the start and re-create the snapshot, explicitly including the schemas of these 'ghost' objects. So, the only thing we can do is flag up dependent ghost objects in the UI, and ask the user what we should do with it – assume it doesn’t exist, assume it’s the same as the target, or specify a definition for it. Unfortunately, such functionality didn’t make the cut for v1 of Schema Compare (as this is very much an edge case for a non-critical piece of functionality), so we simply flag the ghost objects up in the sync wizard as unsyncable, and let the user sort out what’s going on and edit the sync script as appropriate. There are some things that we do do to alleviate somewhat this rather unhappy situation; if a user creates a snapshot from the source or target of a database comparison, we include all the objects registered from the database, not just the ones in the schemas originally selected for comparison. This includes any extra dependent objects registered through the comparison dependencies algorithm. If the user then compares the resulting snapshot against the same database they were comparing against when it was created, the extra dependencies will be included in the snapshot as required and everything will be good. Fortunately, this problem will come up quite rarely, and only when the user uses snapshots and tries to sync objects with unknown cross-schema dependencies. However, the solution is not an easy one, and lead to some difficult architecture and design decisions within the product. And all this pain follows from the simple decision to allow schema pre-filtering! Next: why adding a column to a table isn't as easy as you would think...

Read the article

I have a problem with a AE1200 Cisco/Linksys Wireless-N USB adapter having stopped working after I ran the update manager in Ubuntu 12.04

- by user69670

Here is the problem, I use a Cisco/Linksys AE1200 wireless network adapter to connect my desktop to a public wifi internet connection. I use ndiswrapper to use the windows driver and it had been working fine for me untill I ran the update manager overnight a few days ago. When I woke up it was asking for the normal computer restart to implement the changes but after rebooting the computer, the wireless adapter did not work, the status light on the adapter did not light up even though ubuntu recognizes it is there and according to ndiswrapper the drivers are loaded and the hardware is present. the grep command is being a bitch for some unknown reason today so this will be long sorry Output from "lspci": 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge (rev 01) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] 02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem 02:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Output from "lsusb": Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 13b1:0039 Linksys AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235] Bus 003 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse Bus 004 Device 002: ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB Output from "ifconfig": eth0 Link encap:Ethernet HWaddr 00:19:21:b6:af:7c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0xb400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13232 errors:0 dropped:0 overruns:0 frame:0 TX packets:13232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1084624 (1.0 MB) TX bytes:1084624 (1.0 MB) Output from "iwconfig": lo no wireless extensions. eth0 no wireless extensions. Output from "lsmod": Module Size Used by nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat uas 17828 0 usb_storage 39646 1 nls_utf8 12493 1 udf 84366 1 crc_itu_t 12627 1 udf snd_ca0106 39279 2 snd_ac97_codec 106082 1 snd_ca0106 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80845 2 snd_ca0106,snd_ac97_codec rfcomm 38139 0 snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_ca0106,snd_seq_midi bnep 17830 2 parport_pc 32114 0 bluetooth 158438 10 rfcomm,bnep ppdev 12849 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd 62064 11 snd_ca0106, snd_ac97_codec,snd_pcm,snd_rawj9fe snd_ca0106,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_ca0106,snd_pcm sp5100_tco 13495 0 i2c_piix4 13093 0 radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon mac_hid 13077 0 shpchp 32325 0 ati_agp 13242 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid 8139too 23283 0 8139cp 26759 0 pata_atiixp 12999 1 Output from "sudo lshw -C network": *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 5 bus info: pci@0000:02:05.0 logical name: eth0 version: 10 serial: 00:19:21:b6:af:7c size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 10 0bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:20 ioport:b400(size=256) memory:ff5fdc00-ff5fdcff Output from "iwlist scan": lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Output from "lsb_release -d": Ubuntu 12.04 LTS Output from "uname -mr": 3.2.0-24-generic-pae i686 Output from "sudo /etc/init.d/networking restart": * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... [ OK ]

Read the article

JQuery + WCF + HTTP 404 Error

- by hangar18

HI All, I've searched high and low and finally decided to post a query here. I'm writing a very basic HTML page from which I'm trying to call a WCF service using jQuery and parse it using JSON. Service: IMyDemo.cs [ServiceContract] public interface IMyDemo { [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, ResponseFormat = WebMessageFormat.Json)] Employee DoWork(); [OperationContract] [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, ResponseFormat = WebMessageFormat.Json)] Employee GetEmp(int age, string name); } [DataContract] public class Employee { [DataMember] public int EmpId { get; set; } [DataMember] public string EmpName { get; set; } [DataMember] public int EmpSalary { get; set; } } MyDemo.svc.cs public Employee DoWork() { // Add your operation implementation here Employee obj = new Employee() { EmpSalary = 12, EmpName = "SomeName" }; return obj; } public Employee GetEmp(int age, string name) { Employee emp = new Employee(); if (age > 0) emp.EmpSalary = 12 + age; if (!string.IsNullOrEmpty(name)) emp.EmpName = "Server" + name; return emp; } WEb.Config <system.serviceModel> <services> <service behaviorConfiguration="EmployeesBehavior" name="MySample.MyDemo"> <endpoint address="" binding="webHttpBinding" contract="MySample.IMyDemo" behaviorConfiguration="EmployeesBehavior"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="EmployeesBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> <endpointBehaviors> <behavior name="EmployeesBehavior"> <webHttp/> </behavior> </endpointBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> MyDemo.htm <head> <title></title> <script type="text/javascript" language="javascript" src="Scripts/jquery-1.4.1.js"></script> <script type="text/javascript" language="javascript" src="Scripts/json.js"></script> <script type="text/javascript"> //create a global javascript object for the AJAX defaults. debugger; var ajaxDefaults = {}; ajaxDefaults.base = { type: "POST", timeout : 1000, dataFilter: function (data) { //see http://encosia.com/2009/06/29/never-worry-about-asp-net-ajaxs-d-again/ data = JSON.parse(data); //use the JSON2 library if you aren’t using FF3+, IE8, Safari 3/Google Chrome return data.hasOwnProperty("d") ? data.d : data; }, error: function (xhr) { //see if (!xhr) return; if (xhr.responseText) { var response = JSON.parse(xhr.responseText); //console.log works in FF + Firebug only, replace this code if (response) alert(response); else alert("Unknown server error"); } } }; ajaxDefaults.json = $.extend(ajaxDefaults.base, { //see http://encosia.com/2008/03/27/using-jquery-to-consume-aspnet-json-web-services/ contentType: "application/json; charset=utf-8", dataType: "json" }); var ops = { baseUrl: "/MyService/MySample/MyDemo.svc/", doWork: function () { //see http://api.jquery.com/jQuery.extend/ var ajaxOptions = $.extend(ajaxDefaults.json, { url: ops.baseUrl + "DoWork", data: "{}", success: function (msg) { console.log("success"); console.log(typeof msg); if (typeof msg !== "undefined") { console.log(msg); } } }); $.ajax(ajaxOptions); return false; }, getEmp: function () { var ajaxOpts = $.extend(ajaxDefaults.json, { url: ops.baseUrl + "GetEmp", data: JSON.stringify({ age: 12, name: "NameName" }), success: function (msg) { $("span#lbl").html("age: " + msg.Age + "name:" + msg.Name); } }); $.ajax(ajaxOpts); return false; } } </script> </head> <body> <span id="lbl">abc</span> <br /><br /> <input type="button" value="GetEmployee" id="btnGetEmployee" onclick="javascript:ops.getEmp();" /> </body> I'm just not able to get this running. When I debug, I see the error being returned from the call is " Server Error in '/jQuerySample' Application. <h2> <i>HTTP Error 404 - Not Found.</i> </h2></span> " Looks like I'm missing something basic here. My sample is based on this I've been trying to fix the code for sometime now so I'd like you to take a look and see if you can figure out what is it that I'm doing wrong here. I'm able to see that the service is created when I browse the service in IE. I've also tried changing the setting as mentioned here Appreciate your help. I'm gonna blog about this as soon as the issue is resolved for the benefit of other devs Thanks -Soni

Read the article

Can't connect to Wired Network after installing 12.04

- by ezz9

I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

Read the article

Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

- by woody

New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

Read the article

The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

- by david.talamelli

[Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

Read the article

Cannot connect to secure wireless with Netgear wna3100 USB

- by Vince Radice

I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

Read the article

Content Query Web Part and the Yes/No Field

- by Bil Simser

The Content Query Web Part (CQWP) is a pretty powerful beast. It allows you to do multiple site queries and aggregate the results. This is great for rolling up content and doing some summary type reporting. Here’s a trick to remember about Yes/No fields and using the CQWP. If you’re building a news style site and want to aggregate say all the announcements that people tag a certain way, up onto the home page this might be a solution. First we need to allow a way for users of all our sites to mark an announcement for inclusion on our Intranet Home Page. We’ll do this by just modifying the Announcement Content type and adding a Yes/No field to it. There are alternate ways of doing this like building a new Announcement type or stapling a feature to all sites to add our column but this is pretty low impact and only affects our current site collection so let’s go with it for now, okay? You can berate me in the comments about the proper way I should have done this part. Go to the Site Settings for the Site Collection and click on Site Content Types under the Galleries. This takes you to the gallery for this site and all subsites. Scroll down until you see the List Content Types and click on Announcements. Now we’re modifying the Announcement content type which affects all those announcement lists that are created by default if you’re building sites using the Team Site template (or creating a new Announcements list on any site for that matter). Click on Add from new site column under the Column list. This will allow us to create a new Yes/No field that users will see in Announcement items. This field will allow the user to flag the announcement for inclusion on the home page. Feel free to modify the fields as you see fit for your environment, this is just an example. Now that we’ve added the column to our Announcements Content type we can go into any site that has an announcement list, modify that announcement and flag it to be included on our home page. See the new Featured column? That was the result of modifying our Announcements Content Type on this site collection. Now we can move onto the dirty part, displaying it in a CQWP on the home page. And here is where the fun begins (and the head scratching should end). On our home page we want to drop a Content Query Web Part and aggregate any Announcement that’s been flagged as Featured by the users (we could also add the filter to handle Expires so we don’t show old content so go ahead and do that if you want). First add a CQWP to the page then modify the settings for the web part. In the first section, Query, we want the List Type to be set to Announcements and the Content type to be Announcement so set your options like this: Click Apply and you’ll see the results display all Announcements from any site in the site collection. I have five team sites created each with a unique announcement added to them. Now comes the filtering. We don’t want to include every announcement, only ones users flag using that Featured column we added. At first blush you might scroll down to the Additional Filters part of the Query options and set the Featured column to be equal to Yes: This seems correct doesn’t it? After all, the column is a Yes/No column and looking at an announcement in the site, it displays the field as Yes or No: However after applying the filter you get this result: (I have the announcements from Team Site 1 and Team Site 4 flagged as Featured) Huh? It’s BACKWARDS! Let’s confirm that. Go back in and change the Additional Filters section from Yes to No and hit Apply and you get this: Wait a minute? Shouldn’t I see Team Site 1 and 4 if the logic is backwards? Why am I seeing the same thing as before. What gives… For whatever reason, unknown to me, a Yes/No field (even though it displays as such) really uses 1 and 0 behind the scenes. Yeah, someone was stuck on using integer values for booleans when they wrote SharePoint (probably after a long night of white boarding ways to mess with developers heads) and came up with this. The solution is pretty simple but not very discoverable. Set the filter to include your flagged items like so: And it will filter the items marked as Featured correctly giving you this result: This kind of solution could also be extended and enhanced. Here are a few suggestions and ideas: Modify the ItemStyle.xsl file to add a new style for this aggregation which would include the first few paragraphs of the body (or perhaps add another field to the Content type called Excerpt or Summary and display that instead) Add an Image column to the Announcement Content type to include a Picture field and display it in the summary Add a Category choice field (Employee News, Current Events, Headlines, etc.) and add multiple CQWPs to the home page filtering each one on a different category I know some may find this topic old and dusty but I didn’t see a lot out there specifically on filtering the Yes/No fields and the whole 1/0 trick was a little wonky, so I figured a few pictures would help walk through overcoming yet another SharePoint weirdness. With a little work and some creative juices you can easily us the power of aggregation and the CQWP to build a news site from content on your team sites.

Read the article

Is this how dynamic language copes with dynamic requirement?

- by Amumu

The question is in the title. I want to have my thinking verified by experienced people. You can add more or disregard my opinion, but give me a reason. Here is an example requirement: Suppose you are required to implement a fighting game. Initially, the game only includes fighters, who can attack each other. Each fighter can punch, kick or block incoming attacks. Fighters can have various fighting styles: Karate, Judo, Kung Fu... That's it for the simple universe of the game. In an OO like Java, it can be implemented similar to this way: abstract class Fighter { int hp, attack; void punch(Fighter otherFighter); void kick(Fighter otherFighter); void block(Figther otherFighter); }; class KarateFighter extends Fighter { //...implementation...}; class JudoFighter extends Fighter { //...implementation... }; class KungFuFighter extends Fighter { //...implementation ... }; This is fine if the game stays like this forever. But, somehow the game designers decide to change the theme of the game: instead of a simple fighting game, the game evolves to become a RPG, in which characters can not only fight but perform other activities, i.e. the character can be a priest, an accountant, a scientist etc... At this point, to make it more generic, we have to change the structure of our original design: Fighter is not used to refer to a person anymore; it refers to a profession. The specialized classes of Fighter (KaraterFighter, JudoFighter, KungFuFighter) . Now we have to create a generic class named Person. However, to adapt this change, I have to change the method signatures of the original operations: class Person { int hp, attack; List<Profession> skillSet; }; abstract class Profession {}; class Fighter extends Profession { void punch(Person otherFighter); void kick(Person otherFighter); void block(Person otherFighter); }; class KarateFighter extends Fighter { //...implementation...}; class JudoFighter extends Fighter { //...implementation... }; class KungFuFighter extends Fighter { //...implementation ... }; class Accountant extends Profession { void calculateTax(Person p) { //...implementation...}; void calculateTax(Company c) { //...implementation...}; }; //... more professions... Here are the problems: To adapt to the method changes, I have to fix the places where the changed methods are called (refactoring). Every time a new requirement is introduced, the current structural design has to be broken to adapt the changes. This leads to the first problem. Rigid structure makes it hard for code reuse. A function can only accept the predefined types, but it cannot accept future unknown types. A written function is bound to its current universe and has no way to accommodate to the new types, without modifications or rewrite from scratch. I see Java has a lot of deprecated methods. OO is an extreme case because it has inheritance to add up the complexity, but in general for statically typed language, types are very strict. In contrast, a dynamic language can handle the above case as follow: ;;fighter1 punch fighter2 (defun perform-punch (fighter1 fighter2) ...implementation... ) ;;fighter1 kick fighter2 (defun perform-kick (fighter1 fighter2) ...implementation... ) ;;fighter1 blocks attacks from fighter2 (defun perform-block (fighter1 fighter2) ...implementation... ) fighter1 and fighter2 can be anything as long as it has the required data for calculation; or methods (duck typing). You don't have to change from the type Fighter to Person. In the case of Lisp, because Lisp only has a single data structure: list, it's even easier to adapt to changes. However, other dynamic languages can have similar behaviors as well. I work primarily with static languages (mainly C and Java, but working with Java was a long time ago). I started learning Lisp and some other dynamic languages this year. I can see how it helps improving my productivity.

Read the article

Columnstore Case Study #2: Columnstore faster than SSAS Cube at DevCon Security

- by aspiringgeek

Preamble This is the second in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in my big deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. See also Columnstore Case Study #1: MSIT SONAR Aggregations Why Columnstore? As stated previously, If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. The Customer DevCon Security provides home & business security services & has been in business for 135 years. I met DevCon personnel while speaking to the Utah County SQL User Group on 20 February 2012. (Thanks to TJ Belt (b|@tjaybelt) & Ben Miller (b|@DBADuck) for the invitation which serendipitously coincided with the height of ski season.) The App: DevCon Security Reporting: Optimized & Ad Hoc Queries DevCon users interrogate a SQL Server 2012 Analysis Services cube via SSRS. In addition, the SQL Server 2012 relational back end is the target of ad hoc queries; this DW back end is refreshed nightly during a brief maintenance window via conventional table partition switching. SSRS, SSAS, & MDX Conventional relational structures were unable to provide adequate performance for user interaction for the SSRS reports. An SSAS solution was implemented requiring personnel to ramp up technically, including learning enough MDX to satisfy requirements. Ad Hoc Queries Even though the fact table is relatively small—only 22 million rows & 33GB—the table was a typical DW table in terms of its width: 137 columns, any of which could be the target of ad hoc interrogation. As is common in DW reporting scenarios such as this, it is often nearly to optimize for such queries using conventional indexing. DevCon DBAs & developers attended PASS 2012 & were introduced to the marvels of columnstore in a session presented by Klaus Aschenbrenner (b|@Aschenbrenner) The Details Classic vs. columnstore before-&-after metrics are impressive. Scenario Conventional Structures Columnstore ? SSRS via SSAS 10 - 12 seconds 1 second >10x Ad Hoc 5-7 minutes (300 - 420 seconds) 1 - 2 seconds >100x Here are two charts characterizing this data graphically. The first is a linear representation of Report Duration (in seconds) for Conventional Structures vs. Columnstore Indexes. As is so often the case when we chart such significant deltas, the linear scale doesn’t expose some the dramatically improved values corresponding to the columnstore metrics. Just to make it fair here’s the same data represented logarithmically; yet even here the values corresponding to 1 –2 seconds aren’t visible. The Wins Performance: Even prior to columnstore implementation, at 10 - 12 seconds canned report performance against the SSAS cube was tolerable. Yet the 1 second performance afterward is clearly better. As significant as that is, imagine the user experience re: ad hoc interrogation. The difference between several minutes vs. one or two seconds is a game changer, literally changing the way users interact with their data—no mental context switching, no wondering when the results will appear, no preoccupation with the spinning mind-numbing hurry-up-&-wait indicators. As we’ve commonly found elsewhere, columnstore indexes here provided performance improvements of one, two, or more orders of magnitude. Simplified Infrastructure: Because in this case a nonclustered columnstore index on a conventional DW table was faster than an Analysis Services cube, the entire SSAS infrastructure was rendered superfluous & was retired. PASS Rocks: Once again, the value of attending PASS is proven out. The trip to Charlotte combined with eager & enquiring minds let directly to this success story. Find out more about the next PASS Summit here, hosted this year in Seattle on November 4 - 7, 2014. DevCon BI Team Lead Nathan Allan provided this unsolicited feedback: “What we found was pretty awesome. It has been a game changer for us in terms of the flexibility we can offer people that would like to get to the data in different ways.” Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the second in a series of reports on columnstore implementations, results from DevCon Security, a live customer production app for which performance increased by factors of from 10x to 100x for all report queries, including canned queries as well as reducing time for results for ad hoc queries from 5 - 7 minutes to 1 - 2 seconds. As a result of columnstore performance, the customer retired their SSAS infrastructure. I invite you to consider leveraging columnstore in your own environment. Let me know if you have any questions.

Read the article

How to remap Fn key combinations (Lenovo G500)

- by Anatoli

I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

Read the article

CD/DVD drive not mounted when inserted with Disc of any kind

- by Cisco Sán

I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

Read the article

Can not print after upgrading from 12.x to 14.04

- by user318889

After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

Search Results

Search found 4065 results on 163 pages for 'unknown fool'.

Page 147/163 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >

- by mstaessen

- by Evils

- by Ones and Zeroes

- by Edward M. Bergmann

- by Fredrik N

- by Thomas

- by John Graves

- by uvasal

- by jamiet

- by Alois Kraus

- by Geertjan

- by woody

- by Simon Cooper

- by user69670

- by hangar18

- by ezz9

- by woody

- by david.talamelli

- by Vince Radice

- by Bil Simser

- by Amumu

- by aspiringgeek

- by Anatoli

- by Cisco Sán

- by user318889

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >