Search Results

Search found 21235 results on 850 pages for 'www'.

Page 147/850 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• Squid SSL transparent proxy - SSL_connect:error in SSLv2/v3 read server hello A

  - by larryzhao

  I am trying to setup a SSL proxy for one of my internal servers to visit https://www.googleapis.com using Squid, to make my Rails application on that server to reach googleapis.com via the proxy. I am new to this, so my approach is to setup a SSL transparent proxy with Squid. I build Squid 3.3 on Ubuntu 12.04, generated a pair of ssl key and crt, and configure squid like this: http_port 443 transparent cert=/home/larry/ssl/server.csr key=/home/larry/ssl/server.key And leaves almost all other configurations default. The authorization of the dir that holds key/crt is drwxrwxr-x 2 proxy proxy 4096 Oct 17 15:45 ssl Back on my dev laptop, I put <proxy-server-ip> www.googleapis.com in my /etc/hosts to make the call goes to my proxy server. But when I try it in my rails application, I got: SSL_connect returned=1 errno=0 state=SSLv2/v3 read server hello A: unknown protocol And I also tried with openssl in cli: openssl s_client -state -nbio -connect www.googleapis.com:443 2>&1 | grep "^SSL" SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:error in SSLv2/v3 read server hello A SSL_connect:error in SSLv2/v3 read server hello A Where did I do wrong?

  Read the article

• Apache + PHP via FastCGI

  - by Wilco

  I'm running into some problems while attempting to run PHP via FastCGI in Apache. I have the FastCGI module loaded, but get the following error when attempting to load a page: The requested URL /fastcgi/php54.fcgi/index.php was not found on this server. Somewhere, it seems that the script to be executed is appended to the executable without any spaces. Is this where the problem likely is? Below I've included snippets from my Apache configuration (hopefully this is enough): LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so FastCgiIpcDir /var/run/fastcgi AddHandler fastcgi-script .fcgi FastCgiConfig -autoUpdate -singleThreshold 100 -killInterval 300 AddType application/x-httpd-php .php ScriptAlias /fastcgi/ /Library/WebServer/FCGI-Executables/ <Directory "/Library/WebServer/FCGI-Executables"> Options +ExecCGI SetHandler fastcgi-script Order allow,deny Allow from all <VirtualHost *:80> ServerName www.somedomain.com ServerAdmin [email protected] DocumentRoot "/Web/www.somedomain.com" DirectoryIndex index.html index.php default.html CustomLog /var/log/apache2/access_log combinedvhost ErrorLog /var/log/apache2/error_log Action application/x-httpd-php /fastcgi/php54.fcgi <IfModule mod_ssl.c> SSLEngine Off SSLCipherSuite "ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM" SSLProtocol -ALL +SSLv3 +TLSv1 SSLProxyEngine On SSLProxyProtocol -ALL +SSLv3 +TLSv1 </IfModule> <Directory "/Web/www.somedomain.com"> Options All -Indexes +ExecCGI +Includes +MultiViews AllowOverride All <IfModule mod_dav.c> DAV Off </IfModule> <IfDefine !WEBSERVICE_ON> Deny from all ErrorDocument 403 /customerror/websitesoff403.html </IfDefine> </Directory> </VirtualHost> ... and this is the executable: #!/bin/sh PHP_FCGI_CHILDREN=1 PHP_FCGI_MAX_REQUESTS=5000 export PHP_FCGI_CHILDREN export PHP_FCGI_MAX_REQUESTS exec /opt/local/bin/php-cgi54

  Read the article

• Postfix: Using google apps for stmp errors

  - by Zed Said

  I am using postfix and need to send the mail using google apps smtp. I am getting errors after I thought I had set everything up correctly: May 11 09:50:57 zedsaid postfix/error[22214]: 00E009693FB: to=<[email protected]>, relay=none, delay=2466, delays=2462/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) May 11 09:50:57 zedsaid postfix/error[22213]: 0ACB36D1B94: to=<[email protected]>, relay=none, delay=2486, delays=2482/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) May 11 09:50:57 zedsaid postfix/error[22232]: 067379693D3: to=<[email protected]>, relay=none, delay=2421, delays=2417/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = zedsaid.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = #relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all delay_warning_time = 4h smtpd_recipient_limit = 16 # how many error before back off. smtpd_soft_error_limit = 3 # how many max errors before blocking it. smtpd_hard_error_limit = 12 ## Gmail Relay relayhost = [smtp.gmail.com]:587 smtp_use_tls = yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_sasl_mechanism_filter = login smtp_tls_eccert_file = smtp_tls_eckey_file = smtp_use_tls = yes smtp_enforce_tls = no smtp_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_received_header = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport debug_peer_list = smtp.gmail.com debug_peer_level = 3 What am I doing wrong?

  Read the article

• Expanding to dual video cards

  - by Anthony Greco

  I know a lot of factors can go into play here, so I will list my current hardware and setup: MOBO: GIGABYTE GA-890FXA-UD5 [http://www.newegg.com/Product/Product.aspx?Item=N82E16813128441] Processor: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz [http://www.newegg.com/Product/Product.aspx?Item=N82E16819103849] Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) [https://secure.newegg.com/NewMyAccount/OrderHistory.aspx?RandomID=4933910872745320111128011418] Current video card: EVGA 01G-P3-1366-TR GeForce GTX 460 SE [http://www.newegg.com/Product/Product.aspx?Item=N82E16814130591] OS: Windows 7 Ultimate x64 Currently I can run 2 monitors just fine in my setup. However, I want to upgrade this to 4 monitors. My question is, what is the best way to do this? I remember in the past reading I need the same type of video card, however would any GeForce GTX work, or do i need that very specific model (EVGA 01G-P3-1366-TR GeForce GTX 460 SE)? Are there any issues I should be aware of before I order 2 new monitors and a video card? Are there video cards better setup for this? I know NVidia offers SLI, however I do not know if my mobo is compliant. My mobo also offers CrossFireX configuration, though from what it says only Radeon are compliant. Any suggestions / feedbacks on my best route with my current setup is appreciated. Even if you suggest buying 2 new identical video cards, as long as you can mention which and why that is better I really appreciate it. Note: I really do not do any gaming. I sometimes do some 3D work in Unity and very rarely in Maya. Besides that I mostly do all my computer work in Visual Studios and Photoshop. I however need the 2 extra monitors because I monitor sometimes 5 remote desktops at once and switching on only 2 is becoming a very big pain. Also seeing 3 side by side while I work on the 4th will be very helpful. Again, I appreciate any feedback, as I have googled a bunch and just want to make sure what I buy will work.

  Read the article

• Either, nginx+php-fpm bad config or nginx+php-fpm cannot handle high query?

  - by The Wolf

  I have wordpress installed in my server configured(hopefully with nginx+php-fpm+mariaDB). I am trying to import using wordpress importer a 1.5MB xml file. Everytime I try to upload it using the importer, it got cut of... meaning just blank screen result.. Here is my error log: actually I just posted 2 of the errors [error] 858#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xxx.xx.xx, server: xxx.com, request: "GET xxxx.html HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" [error] 858#0: *13 connect() failed (111: Connection refused) while connecting to upstream, client: xxx.x.xx.xx, server: xxx.com, request: "GET xxxx.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" I don't know what is the reason why it can't process the wordpress export .xml. I already increased max_file_upload & etc., but nothing happens. Hope somebody can help me. Here are my conf: nginx.conf user nginx; worker_processes 8; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; server_tokens off; keepalive_timeout 65; fastcgi_read_timeout 500; #gzip on; client_max_body_size 2M; php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf [root@host etc]# vim php-fpm.conf [root@host etc]# vim php-fpm.conf ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf ps aux [root@host etc]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 2900 1380 ? Ss Jun02 0:00 init root 2 0.0 0.0 0 0 ? S Jun02 0:00 [kthreadd/9308] root 3 0.0 0.0 0 0 ? S Jun02 0:00 [khelper/9308] root 124 0.0 0.0 2464 576 ? S<s Jun02 0:00 /sbin/udevd -d root 460 0.0 0.1 35976 1308 ? Sl Jun02 0:00 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5 root 474 0.0 0.0 8940 1028 ? Ss Jun02 0:00 /usr/sbin/sshd root 481 0.0 0.0 3264 876 ? Ss Jun02 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 491 0.0 0.1 6268 1432 ? S Jun02 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/host.busilak.com. mysql 584 0.1 6.8 679072 71456 ? Sl Jun02 0:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --use root 586 0.0 0.3 12008 3820 ? Ss Jun02 0:01 sshd: root@pts/0 root 629 0.0 0.0 9140 756 ? Ss Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 630 0.0 0.0 9140 520 ? S Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 645 0.0 0.1 12788 1928 ? Ss Jun02 0:01 sendmail: accepting connections smmsp 653 0.0 0.1 12576 1728 ? Ss Jun02 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 691 0.0 0.1 7148 1184 ? Ss Jun02 0:00 crond root 698 0.0 0.1 6272 1688 pts/0 Ss Jun02 0:00 -bash root 1006 0.0 0.0 7828 924 ? Ss 00:30 0:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf nginx 1007 0.0 0.1 8156 1724 ? S 00:30 0:00 nginx: worker process nginx 1008 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1009 0.0 0.1 8020 1356 ? S 00:30 0:00 nginx: worker process nginx 1011 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1012 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1013 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1014 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1015 0.0 0.1 8024 1344 ? S 00:30 0:00 nginx: worker process root 1030 0.0 0.2 25396 2904 ? Ss 00:30 0:00 php-fpm: master process (/etc/php-fpm.conf) apache 1031 0.0 1.9 40700 20624 ? S 00:30 0:00 php-fpm: pool www apache 1032 0.0 2.0 41924 21888 ? S 00:30 0:01 php-fpm: pool www apache 1033 0.0 1.9 41212 20848 ? S 00:30 0:01 php-fpm: pool www apache 1034 0.0 1.9 40956 20792 ? S 00:30 0:01 php-fpm: pool www apache 1035 0.0 2.0 41560 21556 ? S 00:30 0:02 php-fpm: pool www apache 1040 0.0 1.8 39292 19120 ? S 00:30 0:00 php-fpm: pool www root 1125 0.0 0.0 6080 1040 pts/0 R+ 01:04 0:00 ps aux netstat -l [root@host etc]# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 localhost.locald:cslistener *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 60575947 /var/run/saslauthd/mux unix 2 [ ACC ] STREAM LISTENING 60574168 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 60575873 /var/lib/mysql/mysql.sock Hope somebody can help me to figure out what is the problem.

  Read the article

• Change OpenVZ route to pass through ip failover

  - by Kevin Campion

  I have one dedicaced server with its own IP and another IP (failover) who refer to the first. I will wish to change the gateway of a Proxmox virtual machine (openvz) who runs on this dedicaced server to go through the failover IP rather than the ip of host main server. Once connected to a virtual machine, when I do a traceroute VE# traceroute www.google.fr traceroute to www.google.fr (209.85.229.104), 30 hops max, 60 byte packets 1 MY_SERVER_NAME.ovh.net (xxx.xxx.xxx.xxx FIRST_IP_MAIN_SERVER) 0.021 ms 0.010 ms 0.009 ms The first line tells me the ip of host main server. I would like that the traceroute display the second IP failover. VE# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0 default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0 With iptables HOST# iptables -t nat -L Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere MASQUERADE all -- anywhere anywhere SNAT tcp -- anywhere 10.10.101.2 tcp dpt:www state NEW,RELATED,ESTABLISHED,UNTRACKED to:SECOND_IP_FAILOVER SNAT all -- 10.10.101.2 anywhere to:SECOND_IP_FAILOVER 10.10.101.2 is the virtual machine IP (interface venet0) Any ideas ?

  Read the article

• Linux apache developing configuration

  - by Jeffrey Vandenborne

  Recenly reinstalled my system, and came to a point where I need apache and php. I've been searching a long time, but I can't figure out how to configure apache the best way for a developer computer. The plan is simple, I want to install apache 2 + mysql server so I can develop some php website. I don't want to install lamp though, just the apache2, php5 and mysql. The problem that I've been looking an answer for is the permissions on the /var/www/ folder. I've tried making it my folder using the chown command, followed by a chmod -R 755 /var/www. Most things work then, but fwrite for example won't work, because I need to give write permissions to everyone, unless I change my global umask to 000 I'm not sure what I can do. In short: I want to install apache2, php5, mysql-server without using lamp, but configured in a way so I can open up netbeans, start a project with root in /var/www/, and run every single function without permission faults. Does anyone have experiences or workarounds to this? Extra: OS: Ubuntu 10.04 ARCH: x86_64

  Read the article

• What is wrong with my Watcher (incron-like) daemon?

  - by eric01

  I have installed Watcher this way: both watcher.py and watcher.ini are located in /etc I also installed pyinotify and it does work when I use python -m pyinotify -v /var/www However, I want to use the daemon and when I start watcher.py, I get weird lines on my watcher.log (see below). I also included my watcher.ini file. Note: I have the latest version of Python. The watcher.py can be found here What is wrong with what I did? Also, do I really need pyinotify? Thanks a lot for your help watcher.ini: [DEFAULT] logfile=/var/log/watcher.log pidfile=/var/run/watcher.pid [job1] watch=/var/www events=create,delete,modify recursive=true command=mkdir /home/mockfolder ## just using this as test watcher.log: 2012-09-22 04:28:23.822029 Daemon started 2012-09-22 04:28:23.822596 job1: /var/www Traceback (most recent call last): File "/etc/watcher.py", line 359, in <module> daemon.start() File "/etc/watcher.py", line 124, in start self.run() File "/etc/watcher.py", line 256, in run autoadd = self.config.getboolean(section,'autoadd') File "/usr/lib/python2.7/ConfigParser.py", line 368, in getboolean v = self.get(section, option) File "/usr/lib/python2.7/ConfigParser.py", line 618, in get raise NoOptionError(option, section) ConfigParser.NoOptionError: No option 'autoadd' in section: 'job1'

  Read the article

• ServerName wildcards in Apache name-based virtual hosts?

  - by Martijn Heemels

  On our LAN I've set up several 'fake' TLDs in the DNS server, with the intention of using them for Apache name-based virtual hosting. I'd like to combine this with mass-virtual-hosting (i.e. VirtualDocumentRoot) on an Ubuntu 10.04 LAMP server. However, I can't get it to select the right vhost! Here is a summary of the Apache config: NameVirtualHost 10.10.0.205 <VirtualHost 10.10.0.205> ServerName *.test VirtualDocumentRoot /var/www/%-3.0.%-2/test/%1/ CustomLog /var/log/apache2/access.log vhost_combined </VirtualHost> <VirtualHost 10.10.0.205> ServerName *.dev VirtualDocumentRoot /var/www/%-3.0.%-2/dev/%1/ CustomLog /var/log/apache2/access.log vhost_combined </VirtualHost> A hostname such as www.domain.com.dev, correctly resolves to 10.10.0.205, but always selects the top vhost, instead of the bottom one, which matches more closely. I was under the impression that Apache would first try to match the ServerName before defaulting to the top vhost for a given IP. What am I doing wrong? Or is this not possible and must I use another IP for each TLD? apachectl -S outputs (trimmed): 10.10.0.205:* is a NameVirtualHost default server *.test port * namevhost *.test port * namevhost *.dev

  Read the article

• fcgiwrap listening to a unix socket file: how to change file permissions

  - by user36520

  I have a web server (nginx) and a CGI application (gitweb) that is ran with fcgiwrap to enable Fast CGI access to it. I want the Fast CGI protocol to take place over a unix socket file. To start the fcgiwrap daemon, I run: setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" (this is a daemontools daemon) The problem is that my web server runs as the user www-data and not the user git. And fcgiwrap creates the socket fastcgi.sock with user git, group git and read only fort the non owner. Thus, nginc with the user www-data can't access the socket. Apparently, fcgiwrap is not able to select permissions of unix socket files. And this is quite annoying. Moreover, if I manage to have the socket file exists before I run fcgiwrap (which is quite difficult given I did not find any shell command to create a socket file), it quits with the following error: Failed to bind: Address already in use The only solution I found is to start the server the following way: rm -f fastcgi.sock # Ensure that the socket doesn't already exists (sleep 5; chgrp www-data fastcgi.sock; chmod g+w fastcgi.sock) & exec setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" Which is far from the most elegant solution. Can you think of anything better ? Thanks

  Read the article

• Configuring DNS and IIS for multiple domains on a single server

  - by RichardS

  I might be over complicating this but...I am hosting several websites and dns for the domains on a single server: domain1.net domain1.com domain2.net I have three items which I'm trying to work out whether to achieve by DNS, by IIS hostnames(bindings), or by IIS redirect. 1. Where I have domain1.net and domain1.com, I want everything from both (all emails and web requests) to just point to the domain1.net. Can I do this at the DNS level, or do I have to set up the email as forwarders on the email server and the domain as a hostname in IIS? For example: [email protected] [email protected] www.domain1.com www.domain1.net 2. I want to make sure that requests for domain1.net and www.domain1.net both resolve to the same place. Should this be done with DNS or with multiple hostnames, or with IIS redirects? 3. If I then want to have one webmail site serving all of domains (webmail.domain1.net, webmail.domain2.net), is it best to this with a cname in DNS or with host headers in IIS?

  Read the article

• Trying to run a codeigniter app on custom php

  - by hamstar

  I have a CodeIgniter app that I deployed to a server with php 5.2 and my dev box has 5.3, and some stuff doesn't work anymore. I didn't want to upgrade php and risk the other app on the server having issues. Anyway I compiled a custom PHP and added the following to a single .conf file in /etc/httpd/conf.d/zcid.conf with all the other conf files. <VirtualHost *:80> DocumentRoot /var/www/cid/app ServerName sub.example.co.nz </VirtualHost> <Directory "/var/www/cid/app"> authtype Basic authname "oh dear how did this get here i am no good with computer" authuserfile /path/to/auth require valid-user RewriteEngine on RewriteCond $1 !^(index\.php|robots\.txt|createEvent\.php|/cgi-bin) RewriteRule ^(.*)$ /index.php/$1 [L] AddHandler custom-php .php Action custom-php /cgi-bin/php53.cgi </Directory> In /var/www/cid/app I have the cgi-bin folder and the php53.cgi that I copied from /usr/local/php53/bin/php-cgi But now when I navigate to the subdomain it says: The requested URL /cgi-bin/php53.cgi/index.php/ was not found on this server. And if I try to browse to /cgi-bin it says (what it is supposed to?): You don't have permission to access /cgi-bin/ on this server. Quite confused now. Anyone know what to do here? Thanks :)

  Read the article

• Is .htaccess slowing down my dedicated server?

  - by David Robles

  First of all, I consider myself more a programmer than a servers guy. I have a website where I receive about 3,000 visits per day, which I think is a lot less than the max capacity for a dedicated server. However, I've noticed that the connection to the website is pretty slow, e.g., to load images, to connect to it via SSH, etc. I configured .httaccess recently to avoid hotlinking to images in my server (i.e. .jpg, .gif and .png), and I was wondering if that could be slowing down my website. This is the configuration that I have: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteEngine on RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://www.mysite.com/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://www.mysite.com$ [NC] RewriteRule .*\.(jpg|jpeg|gif|png|bmp|swf)$ http://www.google.com/ [R,NC] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress I found some code to do that in google, and I just copied to .htacces since I'm not an expert in apache. It works, but I don't know if that is the best way to do it. How can I see if that is the reason why the server is slow? Are there any tools to monitor it? What would you do guys? Thanks in advance!

  Read the article

• Jenkins shell command isn't executing

  - by Dmitro

  In Jenkins project I add command for executiong rm /var/www/ru.liveyurist.ru/tmp/* But when I build project I get error: Started by user anonymous Building in workspace /var/www/ru.myproject.ru Updating https://subversion.assembla.com/svn/myproject/trunk At revision 1168 no change for https://subversion.assembla.com/svn/liveexpert/trunk since the previous build [ru.myproject.ru] $ /bin/sh -xe /tmp/hudson7189633355149866134.sh FATAL: command execution failed java.io.IOException: Cannot run program "/bin/sh" (in directory "/var/www/ru.myproject.ru"): java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at hudson.Proc$LocalProc.<init>(Proc.java:244) at hudson.Proc$LocalProc.<init>(Proc.java:216) at hudson.Launcher$LocalLauncher.launch(Launcher.java:709) at hudson.Launcher$ProcStarter.start(Launcher.java:338) at hudson.Launcher$ProcStarter.join(Launcher.java:345) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:82) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:703) at hudson.model.Build$RunnerImpl.build(Build.java:178) at hudson.model.Build$RunnerImpl.doRun(Build.java:139) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:473) at hudson.model.Run.run(Run.java:1410) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:238) Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 16 more Build step 'Execute shell' marked build as failure Finished: FAILURE I started Jenkins from root user. Please advise what can be reason of this error?

  Read the article

• How can I cornify a SharePoint site?

  - by Chris Farmer

  Inspired by the April 1 gravatar changes and the memory of last year's cornification of Stack Overflow, I wanted to add a cornify button to my company's SharePoint app. I just added their html snippet to a Content Editor Web Part. <a href="http://www.cornify.com" onclick="cornify_add();return false;"> <img src="http://www.cornify.com/assets/cornifycorn.gif" width="52" height="51" border="0" alt="Cornify" /> </a><script type="text/javascript" src="http://www.cornify.com/js/cornify.js"></script> The button renders all glittery and beautiful, and the magical functionality works fine in Chrome and Firefox (I'm on Windows 7) for me. But, in IE8, all the gorgeous unicorn images get added at the bottom of the page such that you can't see them unless you scroll down. Since most of our users are IE users, I fear that this just isn't going to be all that much fun. So, is there some known way to force this to work better in IE8, or is there another similarly fun site adornment utility that I could use that might behave better in a SharePoint 2007 app running in IE7/8?

  Read the article

• configs for several sites in apache with ssl

  - by elCapitano

  i need to secure two different sites in apache. One of them should only be a proxy for a different server which is running on port 8069. Now one (which is natively included in apache) runs with SSL: <VirtualHost *:443> ServerName 192.168.1.20 SSLEngine on SSLCertificateFile /etc/ssl/erp/oeserver.crt SSLCertificateKeyFile /etc/ssl/erp/oeserver.key DocumentRoot /var/www/cloud ServerPath /cloud/ #CustomLog /var/www/logs/ssl-access_log combined #ErrorLog /var/www/logs/ssl-error_log </VirtualHost> The other one is not running and even not registered. When i try to access it, i get an exception (ssl_error_rx_record_too_long): <VirtualHost *:443> ServerName 192.168.1.20 ServerPath /erp/ SSLEngine on SSLCertificateFile /etc/ssl/erp/oeserver.crt SSLCertificateKeyFile /etc/ssl/erp/oeserver.key ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyVia On ProxyPass / http://127.0.0.1:8069/ ProxyPassReverse / http://127.0.0.1:8069 RewriteEngine on RewriteRule ^/(.*) http://127.0.0.1:8069/$1 [P] RequestHeader set "X-Forwarded-Proto" "https" SetEnv proxy-nokeepalive 1 </VirtualHost> My whish is the following configuration: 192.168.1.20 ->> unsecured local path to website 192.168.1.20/cloud/ ->> secured local documentpath from cloud 192.168.1.20/erp/ ->> secured proxy on port 80 for http://192.168.1.20:8069 how is this possible? is this even possible? perhaps cloud.192.168.1.20 and erp.192.168.1.20 is better?! Thank you

  Read the article

• Nginx > Varnish > Gunicorn Error Too many Redirections

  - by kollo

  I have the following config: Nginx Varnish Gunicorn Django I want to cache 2 versions of same site (mobile & web) with Varnish. Gunicorn : WEB: gunicorn_django --bind 127.0.0.1:8181 MOBILE: gunicorn_django --bind 127.0.0.1:8182 Nginx: WEB: server { listen 80; server_name www.mysite.com; location / { proxy_pass http://127.0.0.1:8282; # pass to Varnish proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } MOBILE: server { listen 80; server_name m.mysite.com; location / { proxy_pass http://127.0.0.1:8282; # pass to Varnish proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } Varnish: default.vcl backend mobile_mysite { .host = "127.0.0.1"; .port = "8182"; } backend mysite { .host = "127.0.0.1"; .port = "8181"; } sub vcl_recv { if (req.http.host ~ "(?i)^(m.)?mysite.com$") { set req.http.host = "m.mysite.com"; set req.backend = mobile_mysite; }elsif (req.http.host ~ "(?i)^(www.)?mysite.com$") { set req.http.host = "mysite.com"; set req.backend = mysite; } if (req.url ~ ".*/static") { /* do not cache static content */ return (pass); } } The problem: On Nginx if I setup Mobile version with Varnish (port 8282) and let WEB version with Gunicorn( port 8181), MOBILE is cached by varnish, both WEB & MOBILE works but WEB is not cached. If I set the proxy_pass of WEB version to Varnish (port 8282) and restart Nginx I got an error when accessing web version (www.mysite.com) "Too many redirections" . I Think my problem come from the Varnish config file, as the site works well if I setup Nginx proxy_pass to Gunicorn ports (MOBILE & WEB).

  Read the article

• Ubuntu Pound Reverse Proxy Load Balancing Based off active server load?

  - by Andrew

  I have Pound installed on a loadbalancer. It seems to work okay, except that it randomly assigns the backend server to forward the request to. I've put 1 backend machine under so much load that it went into using swap, and I can't even ssh into it to test this scenareo. I would like the loadbalancer to realize that the machine is overloaded, and send it to a different backend machine. However it doesn't. I've read the man page and it seems like the directive "DynScale 1" is what would monitor this, but it still redirects to the overloaded server. I've also put in "HAport 22" to the backend figuring since I can't ssh in, neither could the loadbalancer and it would consider the backend server dead until it gets rid of the load and responds, but that didn't help either. If anyone could help with this, I'd appreciate it. My current config is below. ###################################################################### ## global options: User "www-data" Group "www-data" #RootJail "/chroot/pound" ## Logging: (goes to syslog by default) ## 0 no logging ## 1 normal ## 2 extended ## 3 Apache-style (common log format) LogLevel 3 ## check backend every X secs: Alive 5 DynScale 1 Client 1200 TimeOut 1500 # poundctl control socket Control "/var/run/pound/poundctl.socket" ###################################################################### ## listen, redirect and ... to: ## redirect all requests on port 80 to SSL ListenHTTP Address 192.168.1.XX Port 80 Service Redirect "https://xxx.com/" End End ListenHTTPS Address 192.168.1.XX Port 443 Cert "/files/www.xxx.com.pem" Service BackEnd Address 192.168.1.1 Port 80 HAport 22 End BackEnd Address 192.168.1.2 Port 80 HAport 22 End End End

  Read the article

• Trying to run a codeigniter app on custom php

  - by hamstar

  I have a CodeIgniter app that I deployed to a server with php 5.2 and my dev box has 5.3, and some stuff doesn't work anymore. I didn't want to upgrade php and risk the other app on the server having issues. Anyway I compiled a custom PHP and added the following to a single .conf file in /etc/httpd/conf.d/zcid.conf with all the other conf files. <VirtualHost *:80> DocumentRoot /var/www/cid/app ServerName sub.example.co.nz </VirtualHost> <Directory "/var/www/cid/app"> authtype Basic authname "oh dear how did this get here i am no good with computer" authuserfile /path/to/auth require valid-user RewriteEngine on RewriteCond $1 !^(index\.php|robots\.txt|createEvent\.php|/cgi-bin) RewriteRule ^(.*)$ /index.php/$1 [L] AddHandler custom-php .php Action custom-php /cgi-bin/php53.cgi </Directory> In /var/www/cid/app I have the cgi-bin folder and the php53.cgi that I copied from /usr/local/php53/bin/php-cgi But now when I navigate to the subdomain it says: The requested URL /cgi-bin/php53.cgi/index.php/ was not found on this server. And if I try to browse to /cgi-bin it says (what it is supposed to?): You don't have permission to access /cgi-bin/ on this server. Quite confused now. Anyone know what to do here? Thanks :)

  Read the article

• NGINX rewrite for vanity URLs when file doesn't exist (try_files and rewrite together)

  - by user1721724

  I'm trying to get vanity URLs on my server. If the file path from the URL doesn't exist, I want to rewrite the URL to profile.php, but if my users have periods in their usernames, their vanity URL doesn't work. Here is my conf block. server { listen 80; server_name www.example.com; rewrite ^/([a-zA-Z0-9-_]+)$ /profile.php?url=$1 last; root /var/www/html/example.com; error_page 404 = /404.php; location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 1y; log_not_found off; } location ~ \.php$ { fastcgi_pass example_fast_cgi; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/html/example.com$fastcgi_script_name; include fastcgi_params; } location / { index index.php index.html index.htm; } location ~ /\.ht { deny all; } location /404.php { internal; return 404; } } Any help would be appreciated. Thanks!

  Read the article

• WordPress permalinks not working, everything seems fine

  - by javipas

  I have a WordPress blog I've migrated from another CMS, and I've being having a lot of problems with my permalinks structure: lots of articles give a 404, although they are there, somewhere, published. The site is www.muycomputerpro.com (MCP for short), and for example an article that should be found is: http://muycomputerpro.com/Actualidad/Especiales/2009-las-grandes-crecen-en-la-bolsa If I do a search on the search tool at MCP, the result is there (see EnlacesMCP-1.jpg) But when I click on the link, our 404 error page appears (see EnlacesMCP-2.jpg) The weird thing is, the article is published, and the permalink is the right one, as you can see on this screenshot of the WordPress CMS: The permalink (below the title) is correct (http://www.muycomputerpro.com/Actualidad/Especiales/2009-las-grandes-crecen-en-la-bolsa/) but it does not work. In fact, if I try to use the short link (http://www.muycomputerpro.com/?p=5023) the article does not show either. I've accessed my WordPress DB and I've search the article to see if there is something wrong there, but from what I can tell all the fields are OK, here's a screenshot: I really don't know what is causing this. The permalink structure should work (I'm using the "Custom permalink" plugin to preserve the old URLs that had a alphanumeric code at the end of the postname) and the permalink config on wordpress is "/%postname%/". I really need help :(

  Read the article

• Can I use multiple URLs in the URL field of KeePass?

  - by Sammy

  I am using KeePass version 2.19. What I would like to do is have more than just one URL address associated with a given user name and password. The entry for a given website might look something like this... Title google User Name email Password pass URL https://accounts.google.com/ServiceLogin?hl=en&continue=https://www.google.com/ https://accounts.google.com/ServiceLogin?hl=sv&continue=https://www.google.com/ https://accounts.google.com/ServiceLogin?hl=de&continue=https://www.google.com/ As you can see the ?hl=en changes into ?hl=sv and then to ?hl=de for the three different languages in which I wish to view the Google log-in page. But this of course could be something completely different, like different web services from the same provider like YouTube and Gmail by Google. Very much like SE where you have several websites but only use one user name and password. I imagine something along the lines of having multiple entries for one and the same website, where KeePass would actually prompt you to choose which one you want to use. So you have several user names and passwords that use the same URL. But is it possible to have several URLs using the same user name and password, so that KeePass asks me "to which of the following three URLs do you want to auto-log into with this password"?

  Read the article

• My Ruby on Rails application only works if the address contains the port

  - by True Soft

  I have a Ruby on Rails application that works ok on my notebook ( http://localhost:3000/ ) I uploaded it on my hosting server, created with CPanel X an application, the URL is http://example.com:12007/ created a rewrite from http://example.com/ to http://example.com:12007/, and started it. If I write in my browser http://example.com:12007/ or http://www.example.com:12007/ all the pages work as expected. But if I write http://example.com/ or http://www.example.com/ the first page is displayed, but without any css or images (just like it wouldn't find them). I can see all the text (even the text from my MySQL database), but with no format. And if I click on any link, I get a error page like this: Not Found The requested URL /some_controller was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. What should I do to make my website work without writing the port in the address bar? The content of my /public_html/.htaccess file is RewriteEngine on RewriteCond %{HTTP_HOST} ^example.com$ [OR] RewriteCond %{HTTP_HOST} ^www.example.com$ RewriteRule ^/?$ "http\:\/\/127\.0\.0\.1\:12007%{REQUEST_URI}" [P,QSA,L] which I guess was generated by CPanel Rewrites.

  Read the article

• Apache Server Redirect Subdomain to Port

  - by Matt Clark

  I am trying to setup my server with a Minecraft server on a non-standard port with a subdomain redirect, which when navigated to by minecraft will go to its correct port, or if navigated to by a web browser will show a web-page. i.e.: **Minecraft** minecraft.example.com:25565 -> example.com:25465 **Web Browser** minecraft.example.com:80 -> Displays HTML Page I am attempting to do this by using the following VirtualHosts in Apache: Listen 25565 <VirtualHost *:80> ServerAdmin [email protected] ServerName minecraft.example.com DocumentRoot /var/www/example.com/minecraft <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/example.com/minecraft/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> <VirtualHost *:25565> ServerAdmin [email protected] ServerName minecraft.example.com ProxyPass / http://localhost:25465 retry=1 acquire=3000 timeout=6$ ProxyPassReverse / http://localhost:25465 </VirtualHost> Running this configuration when I browse to minecraft.example.com I am able to see the files in the /var/www/example.com/minecraft/ folder, however if I try and connect in minecraft I get an exception, and in the browser I get a page with the following information: minecraft.example.com:25565 -> Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /. Reason: Error reading from remote server Could anybody share some insight on what I may be doing wrong and what the best possible solution would be to fix this? Thanks.

  Read the article

• My URL has been identified as a phishing site

  - by user2118559

  Some months before ordered VPS at Ramnode According to tutorial (ZPanelCP on CentOS 6.4) http://www.zvps.co.uk/zpanelcp/centos-6 Installed CentOS and ZPanel) Today received email We are requesting that you secure and investigate the phishing website identified below. This URL has been identified as a phishing site and is currently involved in identity theft activities. URL: hxxp://111.11.111.111/www.connet-itunes.fr/iTunesConnect.woasp/ //IP is modified (not real) This site is being used to display false or spoofed content in an apparent effort to steal personal and financial information. This matter is URGENT. We believe that individuals are being falsely directed to this page and may be persuaded into divulging personal information to a criminal, if the content is not immediately disabled. Trying to understand. Some hacker hacked VPS, placed some file (?) with content that redirects to www.connet-itunes.fr/iTunesConnect.woasp? Then questions 1) how can I find the file? Where it may be located? url is URL: hxxp://111.11.111.111/ IP address, not domain name 2) What to do to protect VPS (with CentOS)? Any tutorial? Where may be security problem? I mean may be someone faced something similar....

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >