Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 148/215 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• Collision with half of a semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: Pixel-perfect collision (Microsoft has a sample) , but then I wouldn't know how to change the meteor angle after the collision 3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• Five years old Ubuntu system - dist-upgrades always went fine, however some tasks remain

  - by knb

  I have a PC with a current Ubuntu distribution installed. I've upgraded many times since 5.10. It always went well, however some tools or features were kind of left behind in a unsatisfactory state: grub to grub2 - is it an really necessary to switch the boot loader some time to grub2. Upgrading this scares me abit. I still have ext3 devices - is it worth upgrading to ext4? should I wait for btrfs? hibernation and suspend- it only worked in 5.10, since 6.04 it was messed up. Should I really care? Any chance to repair this myself? Simply by cleanup or hacking config files. It is a desktop PC after all. So energy saving functionality is not really needed. I am using vmware workstation 6.5 and the latest kernel that supports it is 2.6.32. This is my default kernel now, ignoring 2.6.35. Am I missing anything important in the new kernel now?

  Read the article

• Ubuntu 12.04 - default Radeon driver does not work at all

  - by mumble

  I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

  Read the article

• Google+ Platform Office Hours for April 25, 2012: Q&A with the Hangouts API Team

  Google+ Platform Office Hours for April 25, 2012: Q&A with the Hangouts API Team This week we were joined by Richard Dunn of the Hangouts API team who answered questions about the Hangouts API. Discuss this video on Google+: goo.gl 1:09 - What's going on with the Hangouts API? 3:43 - Jason shares information about his current projects 5:40 - Can I prevent a Hangout app from running within a Hangout On Air? 8:05 - Can we have APIs to control On Air features? 10:05 - Could a Silverlight / JavaScript bridge be created so we can use them in Hangout Apps? 12:01 - Is there a way to obfuscate the code for a Hangouts app? 15:24 - Are there plans to consolidate the various comment and chat channels for Hangouts On Air? 18:53 - When will Hangouts On Air come to Android? 20:48 - How can I access the OAuth token from the API? - developers.google.com 22:39 - When will we have Hangout apps on the mobile devices? 24:57 - Is it possible to search for 2 or more hash tags via the search REST API? 25:45 - Will we see a PHP REST API demo today? 26:20 - How can I restrict usage of a Hangout app? 30:07 - How do you hold a hangout that is simulcast on YouTube? 31:07 - Why do users show up as empty objects before they've authorized the app? 32:52 - What are the best practice for storing user specific configuration? 38:06 - Is anyone doing in application payment? 39:22 - Has anyone written any books about Hangout apps? From: GoogleDevelopers Views: 1619 19 ratings Time: 42:04 More in Science & Technology

  Read the article

• How to force Multiple Monitors correct resolutions for LightDM?

  - by Hanynowsky

  I am affected by the BUG: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/874241 Otherwise, if like me you have a laptop connected to a second monitor of higher resolution, LIGHTDM at the login stage, mirrors the displays in both screens and assign to them a common resolution (1024X768) in my case, instead of extending the desktop (Primary screen with the greeter and secondary with just a logo as mentioned in the Multiple Monitors UX specifications book for 12.04). Here is my xrandr -q @L502X:~$ xrandr -q Screen 0: minimum 320 x 200, current 1920 x 1848, maximum 8192 x 8192 LVDS1 connected 1366x768+309+1080 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm 1920x1080 60.0*+ 1600x1200 60.0 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1280x800 59.8 1024x768 60.0 800x600 60.3 56.2 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) I tried to force lightdm to execute some xrandr commands in order to set the right resolution for each monitor and extend the desktop, but I get a LOW GRAPHICS MODE ERROR (You're running in low graphics mode, your screen, input devices...did not get detected..) I created a simple script named lightdmxrand.sh: #!/bin/sh xrandr --output HDMI1 --primary --mode 1920x1080 --output LVDS1 --mode 1366x768 --below HDMI1 And told lightdm to run it : /etc/lightdm/lightdm.conf [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-setup-script=/usr/bin/numlockx on display-setup-script=/home/hanynowsky/lightdmxrandr.sh Someone knows what is wrong!? Thanks in advance.

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Is my project a web site or a mobile app?

  - by Evik James

  I am a web developer. I have been developing web sites professionally for 15+ years using ColdFusion, SQL Server, and jQuery. I am doing a project for a client that uses the above technologies. The site has a mobile facet too. For that, I am using jQuery Mobile. The site enables retail store personnel to gather a store customer's preferences using any smart phone or tablet. The store personnel just needs to access a special link via a QR code and a login. Anyone can easily access the site from a PC's browser, too. Some sources suggest that mobile apps must be downloaded and installed using a third party, such as from Google, Amazon, or Apple. Others sources suggest that any information designed for use on mobile device is a mobile app. Regarding the site that is specifically designed for use by mobile devices that extensively uses jQuery Mobile, is this a "web site" or a "mobile app"? What is the "proper" description for this type of site? My customer insists that it is one and not the other. I insist that it is the other and not the one. Can you help me clarify this?

  Read the article

• Low Graphics and laggy screen after update to 13.10 from 13.04

  - by Wh0RU

  After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

  Read the article

• SEO and external sites that serve responsive images (like Re-SRC)

  - by Baumr

  Re-SRC is a tool that allows you to automatically serve responsive images for your website from their cloud servers. It delivers a new image file each time the browser window (viewport) is resized. To use it in your HTML when linking to an image, you would do the following: <img src="http://app.resrc.it//www.your-domain.com/img/img001.jpg"/> Some more background for SEO considerations: As an example, looking at their demo page's code, the src of the Arc de Triomphe photo — when the browser window is resized to be at a tablet-width — shows this particular file at it's widest. It is found under the following URL: http://app4-uk.resrc.it/s=w560,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg If the viewport is increased to desktop-width, then a smaller image is served in line with the design; see this URL: http://app4-uk.resrc.it/s=w320,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg If I change the viewport to be about half-way between those two, then the image's URL is: http://app4-uk.resrc.it/s=w240,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg In other words, I found that there is a separate file for every 10-pixel increment of the image width. Very cool for saving bandwidth on mobile devices and service responsive/retina images on others, but... Here are two problems I see for SEO: The img on your site, part of your semantic markup, will not be hosted on your site at all, or even a server you control. Any links to these images will pass on "link juice" to Re-SRC's site instead. You are serving a vast array of different image files to different people — some may link to one, others to another size. Then there's the question of what different search engine crawlers will see. Also: There seems to be no fallback option if their servers are down. Do you see any other concerns? Or, perhaps, do you not see those as concerns?

  Read the article

• Gmail Now Supports Google Drive Integration; Share Files Up to 10GB

  - by Jason Fitzpatrick

  Gmail users can now easily send large files thanks to Google Drive’s increased integration with Gmail–blow through the 25MB in-email attachment limit and share files up to 10GB. From the official Gmail announcement: Have you ever tried to attach a file to an email only to find out it’s too large to send? Now with Drive, you can insert filesup to 10GB – 400 times larger than what you can send as a traditional attachment. Also, because you’re sending a file stored in the cloud, all your recipients will have access to the same, most-up-to-date version.  Like a smart assistant, Gmail will also double-check that your recipients all have access to any files you’re sending. This works like Gmail’s forgotten attachment detector: whenever you send a file from Drive that isn’t shared with everyone, you’ll be prompted with the option to change the file’s sharing settings without leaving your email. It’ll even work with Drive links pasted directly into emails.  The new Gmail/Drive integration is rolling out in waves to users over the next few days and is accessible via the new Gmail compose window. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Cities from Space: A Tour of Urban Planning Patterns

  - by Jason Fitzpatrick

  While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• 'Buy the app' landing page implementations: redirect or javascript popup?

  - by benwad

  My site (using Django) has an app that I'm trying to push - I currently have a piece of middleware that redirects the user to a page advertising the app if they're accessing the page on the iPhone, then setting a cookie so that the user isn't bugged by the message every time they visit the site. This works fine, however checking the page with the mobile Googlebot checker shows that the Googlebot gets stuck in the redirect (since it doesn't store cookies) and therefore won't index the proper content. So, I'm trying to think of an alternative implementation that won't hurt the site's Google ranking and won't have any other adverse effects. I've considered a couple of options: Redirect (the current solution), but don't redirect if the user agent matches the Googlebot's UA string. This would be ideal, however I'm not sure if Google like their bot being treated differently from other users, and I'm afraid the site's ranking may be somehow penalised if I go ahead with this. Use a Javascript popup instead of a redirect. This would make sure the Googlebot finds the content it needs, however I envision this approach causing compatibility issues with the myriad mobile devices/browsers out there, and may affect the page load time. How valid are these options? And is there a better option for implementing this feature out there? I've tried researching this topic but surprisingly can't find any reputable-looking blog posts that explore this topic.

  Read the article

• Installing 10.04 server on HP xw9400 Workstation with RAID 5

  - by Dave Long

  I have a workstation that was given to me that is a friggen powerhouse, so I figured I would set it up as my development and demo server. This is my first experience installing Ubuntu onto a RAID array and so far it has not been a fun one. I have been following the Advanced Installation guide for installing Ubuntu 10.04 server, and it says that there will be an option on the Partition Disks screen to manually create the partitions, but the only options I have are: Configure iSCSI volumes Undo changes to partitions Finish partitioning and write changes to disk Just before I got to that screen I got a message that said: One or more drives containing Serial ATA RAID configurations have been found. Do you wish to activate these RAID devices? It doesn't matter whether I answer yes or no to that, I still get the same Partition Disks screen. When I try to select Finish partitioning and write changes to disk I just get the No root file system error. Has anyone else experienced this, and how do I get past it? Can I not run Ubuntu on this machine?

  Read the article

• preseeded installation keeps asking for confirmation while creating RAID-Partitions on certain hardware-platform

  - by Marc Shennon

  I am aware of the partman-md/confirm_nooverwrite thing, that was the solution to most of this problems in the past. The thing is, that the preseed-file works for almost all hardware-platforms I tested, but only for one (Primergy MX130) it keeps asking for confirmation, before writing the partition-layout to the disks. All machines I tested are running with two SATA Disks, nothing special. I'm not really sure, what information could be needed in order to investigate the cause of this behaviour, but I would of course be willing to provide more information, if someone has an idea. Relevant part of the preseed file is the following: d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/method string raid d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman-md/device_remove_md boolean true d-i partman/choose_partition select finish d-i partman-md/confirm_nooverwrite boolean true # Write the changes to disks? d-i partman/confirm boolean true d-i mdadm/boot_degraded boolean true # RECIPE # Next you need to specify the physical partitions that will be used. d-i partman-auto/expert_recipe string \ multiraid :: \ 500 10000 1000000000 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 512 1000 786 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 8192 10240 10240 raid $lvmignore{ }\ method{ raid } \ . # Parameters are: # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> <devices> <sparedevices> d-i partman-auto-raid/recipe string \ 1 2 0 ext4 / /dev/sda1#/dev/sdb1 . \ 1 2 0 ext2 /boot /dev/sda2#/dev/sdb2 . \ 1 2 0 swap - /dev/sda5#/dev/sdb5 .

  Read the article

• Java and what to do with it

  - by SterAllures

  I've been browsing through several websites and several topics on this website. Now I'm just a starting programmer and I want to make a good decision. From what I understand is that Java is used alot for server stuff, and web applets but not really for computer applications running on a client, it's also used for Android programming and several other mobiles. I'm really interested in Android programming, I really love to program for mobile devices, in this case Android because I really think it has a lot of potential and I don't like the iPhone. If I want to program on Android I have to learn Java (aside from Mono). but if my decision changes over the next couple of years I don't think Java is the right language to get a job that programs computer applications. I think I get a job where I have to program server stuff, rather than computer applications. That's why I think C# is a good choice. I can program for Windows Phone 7 (I hope that will get big). and I have the feeling C# is more widely used for computer applications. so I think C# is more versatile looking at Mobile programming and computer programming. Or am I totally wrong thinking this?

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• When does a programmer know when a new job is not right?

  - by Mysterion

  I believe that the interview process is a selling of both parties - what can the employee offer the employer and vice versa. Assuming an individual has been careful in selecting their new employer (via thorough questioning in the interview process), however when they arrive at the job they find the employer has not been honest about certain aspects of the job. Examples of this dishonesty could include: The employee making it clear that technical excellence is an important factor, which is promised by the employer, but is not fully delivered or a good technical structure does not exist. The employee states they want to work on well architected and short (lets say less than 1 yr) long projects, yet when they start they find they are placed on a poorly architected older project. The employee being told of a pair programming environment to get him up to speed on the project, but being left to his own devices/questioning on arrival. The employee is promised a culture that encourages innovation and technical excellence but finds that this is not the case (eg. using technology for knowledge retention is laughed at). I know that a lot of famous developers feel that you make the place you work at. Is it realistic for a new employee with limited experience in the industry (say less than 5 years) to be able to join the company and change attitudes or even challenge the employer on the perceived dishonesty? Should they stay in this job or cut their losses?

  Read the article

• Working with Active Directory and Windows Small Business Server 2008

  - by AreYouSerious

  I have to say that in most of my time as a network engineer I have had the opportunity to play with servers, but mostly it's been to put our management software on, and that was about it. I have been a Systems Network Engineer for about three months now, and as such I have been respnosible for the configuration of our test devices... this being said, I have had to start working through how to configure and apply such things as GPO through a new forest, domain and OU. This being said I have configured about three different GPO's and applied them to different locations. The first laptop that I brought into the domain took the default Domain group Policy... this was cool, I got excited... then When I tried to bring in the second Laptop, it didn't take the policy. I looked at the configuration, and the default domain policy was applied to domain computers, however since the laptop resides in the SBS Computers of the OU that was created, SBS created individual policies for XP and Vista for that OU, which I was unaware of. So the default policy for that ou overrode the domain policy and none of the options that were defined in the Domain policy were applied... this being said, I am now working on putting the default Domain as an applicable policy in the OU, thus I won't have to reconfigure another policy to mirror the Domain Policy... here goes nothing!!!.... More to follow Later.

  Read the article

• .NET vs Windows 8: Rematch!

  - by Simon Cooper

  So, although you will be able to use your existing .NET skills to develop Metro apps, it turns out Microsoft are limiting Visual Studio 2011 Express to Metro-only. From the Express website: Visual Studio 11 Express for Windows 8 provides tools for Metro style app development. To create desktop apps, you need to use Visual Studio 11 Professional, or higher. Oh dear. To develop any sort of non-Metro application, you will need to pay for at least VS Professional. I suspect Microsoft (or at least, certain groups within Microsoft) have a very explicit strategy in mind. By making VS Express Metro-only, developers who don't want to pay for Professional will be forced to make their simple one-shot or open-source application in Metro. This increases the number of applications available for Windows 8 and Windows mobile devices, which in turn make those platforms more attractive for consumers. When you use the free VS 11 Express, instead of paying Microsoft, you provide them a service by making applications for Metro, which in turn makes Microsoft's mobile offering more attractive to consumers, increasing their market share. Of course, it remains to be seen if developers forced to jump onto the Metro bandwagon will simply jump ship to Android or iOS instead. At least, that's what I think is going on. With Microsoft, who really knows?

  Read the article

• Unity , libgdx, or something else to develop my first game for Android?

  - by capcom

  I want to start by saying that I absolutely love Unity (even more when I team it up with Blender). I really want to start developing games for Android, but it seems like Unity poses way too many roadblocks in terms of which devices it supports (and even if it does support them, it doesn't work well on all of them). I've been looking around for alternatives, and found something called libgdx. Well, it's nothing like Unity unfortunately, but at least it seems like I may be able to reach a larger audience in the market. I'd like to start by making 2D games, but with 3D graphics (say, imported from Blender). I can do this very easily in Unity, and it seems like it should be alright with libgdx too. But I really want to know if ditching Unity is a smart idea, considering how comfortable I am with it already, and how much I like it. Finally, is libgdx something you would recommend considering my requirements/situation? BTW, I am quite familiar with Eclipse too. Many thanks. Feel free to request further details.

  Read the article

• Including Microsoft.XNA.Framework.Input.Touch in a project?

  - by steven_desu

  So after running through tutorials by both Microsoft and www.xnadevelopment.com I feel very confident in my ability to get to work on my first game using the XNA Framework. I've manipulated sprites, added audio, changed game states, and even went a step further to apply the knowledge I had and figure out how to make animations and basic 2-dimensional physics (including impulses, force, acceleration, and speed calculations) But then shortly into the project I hit a curious bump that I've been unable to figure out. In wanting to implement menus, pause screens, and several different aspects of play (a "pre-level" prep screen, the level itself, and a screen after the level to review how well you did) I took a look at Microsoft's Game State Management sample. I understood the concept, although it was admittedly quite a lot to take in. Not wanting to recreate the entire concept by scratch (after all- what purpose would that serve?) I tried copying and pasting the sample code into my own ScreenManager class (as well as InputState and GameScreen classes) to try and borrow their ingenuity. When I did this, however, my project stopped compiling. I was getting the following error: The type or namespace name 'Touch' does not exist in the namespace 'Microsoft.Xna.Framework.Input' (are you missing an assembly reference?) Having read through their sample code already, I realized that this namespace and every function and class within it could be safely ripped from the code without losing functionality. It's a namespace simply for integrating with touchscreen devices (presumably Windows Phone 7, but maybe also tablets). But then I began to wonder- how come Microsoft's sample compiled but mine didn't? I copied their code exactly so there must be a setting somewhere that I need to change in Visual Studio in order to correct this. I tried creating a new project as a Windows Phone 7 game rather than a Windows game, however that only forced it to compile to a Windows Phone emulator and denied me the ability to change the resolution and other features which I clearly had the power to do in the sample code. So my question is simple - how do I properly use the namespace Microsoft.XNA.Framework.Input.Touch?

  Read the article

• Cryptswap not mounted?

  - by woody

  I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 The file /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla already exists and its contents are: [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Is my swap not setup correctly or is it not mounting?

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >