Search Results

Search found 4136 results on 166 pages for 'micro optimization'.

Page 148/166 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• graphic error on console

  - by Christian Elsner

  I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

• Unable to install SQL 2008 on Windows 7

  - by Axel

  SQL 2008 install hangs on Windows 7 The story: Trying to install SQL2008 on Windows 7 hangs on SqlEngineDBStartconfigAction_install_configrc_Cpu32. What I Tried: Uninstall hangs on validation Manual uninstall using msiinv.exe and msiexec /x works Added SQL service accounts to local admins no help Turn of UAC no help Last lines in setup log: 2010-04-01 16:18:05 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle' 2010-04-01 16:18:05 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' to be created 2010-04-01 16:18:07 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' or sql process handle to be signaled 2010-04-01 16:18:07 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents' 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize script 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize default connection string 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NotSpecified 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NamedPipes 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup 2010-04-01 16:18:53 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect' 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL.... 2010-04-01 16:18:53 Slp: Sco: Attempting to connect script 2010-04-01 16:18:53 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup And now comes the fun part: When I open conf mgr I can see the service running, I enabled named pipes and TCP/IP, restarted the service I'm able to connect to the server using an OLE DB connection but not with the Native Client. And what I find suspicious is the following error in my app log: .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\Tools\VDT\DataProjects.dll . Error code = 0x8007000b In MS connect this is reported as a bug but MS is unable to reproduce the problem altough when you search the fora I'm not the only one with this problem. So any help is appreciated.

  Read the article

• Professional WordPress Business Themes

  - by Matt

  Every now and then JustSkins.com receives quote requests for WordPress design for business websites. Most companies now keep up to date with a blog on their corporate website, that showcases their day to day activities & progresses.  Getting such professional wordpress driven website designed from the scratch costs you a lot. If you have decided to make WordPress the CMS for your business website, there are some Professional WordPress themes you can take a look at. We have created this list to help you save some time to do all the trying and the testing. Optimize by WooThemes Last year one of the most popular Business theme by WooThemes was the Coffee Break theme, Optimize is further adaptation of the same. It is simple, sleek design with great functionality. The customizable front page lets you showcase your work or product etc. Demo | Price: $70, Developer Price: $150 | DOWNLOAD WooThemes is also offering their whole Business theme pack for a very very reasonable fee, If you like multiple designs from them you can get this big deal for only $125 Onyx , Impacto by Simple Themes Simple Themes has been making very crisp & beautiful WordPress Themes & are also very reasonably priced. If their themes solve your purpose $39 membership for 3 months is a good deal.  If you are looking to create quick website, landing page or micro site their templates are best. Demo | Price: $39 for 3 Months Membership Rejuvenate by Templatic One of the most beautiful Premium WordPress Theme, Available in 4 elegant color schemes. This theme can be used for your Beauty, Spa and Studio Business. Demo | Price: $65  | DOWNLOAD Templatic has created great professional business templates, such as Gourmet, Real Estate, Job Board, Automobile & lots More. You can also get a Best Value Offer in $299 for all of Templatic Themes. TheProfessional by ElegantThemes Elegant Themes is known to provide very beautiful & straightforward designs. The professional wordpress theme is a simple, crisp & concise Theme you can use to create a business website. The 3 short blurbs on the homepage are simple, which can be used to point them to your major offerings and the prominent slider indicates a clear call to action. There are 52 themes to choose from & Elegant Themes is giving a great offer at such a small yearly fee. Demo | Price: $39 Yearly Membership  | DOWNLOAD Elegant Themes has a cluster of 52 magnificent themes, and all you have to do is pay $39 to win access to all of them. Join today! Some of the Professional designs that I like for a business website are SimplePress and Corporation. Extatic by Chimera Themes The theme includes plenty of great features including custom feature tour pages, portfolio sections, static feature areas, pricing table page, 20+ shortcodes, multiple page/post options, unlimited custom sidebars which can be assigned to posts/pages, advanced theme style editor and options page and much more. Its a must buy Demo | Price: $37 | DOWNLOAD Corporate by Clover Themes Simple Theme for a small business. Corporate is an clean, powerful and feature-rich corporate theme with dynamic and energy design. Demo | Price: $69.95 | DOWNLOAD Bizco by Themify Bizco is a very professional template for wordpress targeted at corporate and product based businesses. This theme is simple yet highly functional and is suitable for showcasing features of your service or product. With the custom page template you can change the display of your pages and posts easily with our visual custom panel. Demo | Price: $70  |DOWNLOAD Devision by Themetrust Devision is a small business wordpress theme that can be used to make a business website within a few minutes. It makes it very easy to showcase and highlight your services or product on the homepage. Demo | Price: Euro 39 | DOWNLOAD BizPress by WPZoom A professional business WordPress theme from WPZoom suitable for companies, organizations, product showcases or other business websites. The theme comes with 4 colour options, featured products / services slider on the homepage, drop down menus, theme options page etc. Demo | Price: $ 69 | DOWNLOAD Clean Classy Corporate by ThemeFuse A very impressive WordPress business theme, that can be used in multiple ways. It is suitable for many kinds, like web products, services, hosting etc etc. Clean Classy Corporate WordPress Theme has a clean crisp look and is professional in appeal. Demo | Price: $49  | DOWNLOAD Insdustry by ThemeJam A powerful Business WordPress Template along with lots of options, colors, and customizable features. This is one for almost any kind of blogger, corporate, or organization. Lots of features, gives it the kind of scalability you might need to create any kind of website. Demo | Price: $ 59 | DOWNLOAD AppPress by ChimeraThemes This professional business WordPress theme includes 5 different colour schemes, advanced theme options page, multiple homepage sliders, custom widgets and page templates. The theme also includes a range of other unique features such as custom title, live style editor to modify colours, font styles, sizes etc, and 20+ shortcodes for creating pricing tables, content columns, boxes, buttons and others. Demo | Price: $ 37 | DOWNLOAD Why WordPress Professional Template? You can modify them, these usually come with a lot of fancy features that enable you to create the website as per your usability & choice. In some cases the  Premium WordPress business themes can be accessed through a subscription service. Premium Vs Free WordPress Themes There are very good Free WordPress themes out there that you can use to modify and code further or create what you want, but this possible when you are technically able. On the contrary Premium WordPress business themes offers great features & can save you a lot of time and money. It varies from business to business, some like to keep their website simple while most want to keep cool nifty features and abilities to scale it differently for various sections, products or categories. All this & more is possible with a Professional Business theme that is suitable/close to your needs.

  Read the article

• SQL SERVER – Database Dynamic Caching by Automatic SQL Server Performance Acceleration

  - by pinaldave

  My second look at SafePeak’s new version (2.1) revealed to me few additional interesting features. For those of you who hadn’t read my previous reviews SafePeak and not familiar with it, here is a quick brief: SafePeak is in business of accelerating performance of SQL Server applications, as well as their scalability, without making code changes to the applications or to the databases. SafePeak performs database dynamic caching, by caching in memory result sets of queries and stored procedures while keeping all those cache correct and up to date. Cached queries are retrieved from the SafePeak RAM in microsecond speed and not send to the SQL Server. The application gets much faster results (100-500 micro seconds), the load on the SQL Server is reduced (less CPU and IO) and the application or the infrastructure gets better scalability. SafePeak solution is hosted either within your cloud servers, hosted servers or your enterprise servers, as part of the application architecture. Connection of the application is done via change of connection strings or adding reroute line in the c:\windows\system32\drivers\etc\hosts file on all application servers. For those who would like to learn more on SafePeak architecture and how it works, I suggest to read this vendor’s webpage: SafePeak Architecture. More interesting new features in SafePeak 2.1 In my previous review of SafePeak new I covered the first 4 things I noticed in the new SafePeak (check out my article “SQLAuthority News – SafePeak Releases a Major Update: SafePeak version 2.1 for SQL Server Performance Acceleration”): Cache setup and fine-tuning – a critical part for getting good caching results Database templates Choosing which database to cache Monitoring and analysis options by SafePeak Since then I had a chance to play with SafePeak some more and here is what I found. 5. Analysis of SQL Performance (present and history): In SafePeak v.2.1 the tools for understanding of performance became more comprehensive. Every 15 minutes SafePeak creates and updates various performance statistics. Each query (or a procedure execute) that arrives to SafePeak gets a SQL pattern, and after it is used again there are statistics for such pattern. An important part of this product is that it understands the dependencies of every pattern (list of tables, views, user defined functions and procs). From this understanding SafePeak creates important analysis information on performance of every object: response time from the database, response time from SafePeak cache, average response time, percent of traffic and break down of behavior. One of the interesting things this behavior column shows is how often the object is actually pdated. The break down analysis allows knowing the above information for: queries and procedures, tables, views, databases and even instances level. The data is show now on all arriving queries, both read queries (that can be cached), but also any types of updates like DMLs, DDLs, DCLs, and even session settings queries. The stats are being updated every 15 minutes and SafePeak dashboard allows going back in time and investigating what happened within any time frame. 6. Logon trigger, for making sure nothing corrupts SafePeak cache data If you have an application with many parts, many servers many possible locations that can actually update the database, or the SQL Server is accessible to many DBAs or software engineers, each can access some database directly and do some changes without going thru SafePeak – this can create a potential corruption of the data stored in SafePeak cache. To make sure SafePeak cache is correct it needs to get all updates to arrive to SafePeak, and if a DBA will access the database directly and do some changes, for example, then SafePeak will simply not know about it and will not clean SafePeak cache. In the new version, SafePeak brought a new feature called “Logon Trigger” to solve the above challenge. By special click of a button SafePeak can deploy a special server logon trigger (with a CLR object) on your SQL Server that actually monitors all connections and informs SafePeak on any connection that is coming not from SafePeak. In SafePeak dashboard there is an interface that allows to control which logins can be ignored based on login names and IPs, while the rest will invoke cache cleanup of SafePeak and actually locks SafePeak cache until this connection will not be closed. Important to note, that this does not interrupt any logins, only informs SafePeak on such connection. On the Dashboard screen in SafePeak you will be able to see those connections and then decide what to do with them. Configuration of this feature in SafePeak dashboard can be done here: Settings -> SQL instances management -> click on instance -> Logon Trigger tab. Other features: 7. User management ability to grant permissions to someone without changing its configuration and only use SafePeak as performance analysis tool. 8. Better reports for analysis of performance using 15 minute resolution charts. 9. Caching of client cursors 10. Support for IPv6 Summary SafePeak is a great SQL Server performance acceleration solution for users who want immediate results for sites with performance, scalability and peak spikes challenges. Especially if your apps are packaged or 3rd party, since no code changes are done. SafePeak can significantly increase response times, by reducing network roundtrip to the database, decreasing CPU resource usage, eliminating I/O and storage access. SafePeak team provides a free fully functional trial www.safepeak.com/download and actually provides a one-on-one assistance during such trial. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• 6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’

  - by Gopinath

  Humans quest for exploring the surrounding planets to see whether we can live there or not is taking new shape today. NASA’s Mars probing robot, Curiosity, blasted off today on its 9 months journey to reach Mars and explore it for the possibilities of life there. Scientist says that Curiosity is one most advanced rover ever launched to probe life on other planets. Here is the launch video and some analysis by a news reporter Lets look at the 6 interesting facts about the mission 1. It’s as big as a car Curiosity is the biggest ever rover ever launched by NASA to probe life on outer planets. It’s as big as a car and almost double the size of its predecessor rover Spirit. The length of Curiosity is around 9 feet 10 inches(3 meters), width is 9 feet 1 inch (2.8 meters) and height is 7 feet (2.1 meters). 2. Powered by Plutonium – Lasts 24×7 for 23 months The earlier missions of NASA to explore Mars are powered by Solar power and that hindered capabilities of the rovers to move around when the Sun is hiding. Due to dependency of Sun the earlier rovers were not able to traverse the places where there is no Sun light. Curiosity on the other hand is equipped with a radioisotope power system that generates electricity from the heat emitted by plutonium’s radioactive decay. The plutonium weighs around 10 pounds and can generate power required for operating the rover close to 23 weeks. The best part of the new power system is, Curiosity can roam around in darkness, light and all year around. 3. Rocket powered backpack for a science fiction style landing The Curiosity is so heavy that NASA could not use parachute and balloons to air-drop the rover on the surface of Mars like it’s previous missions. They are trying out a new science fiction style air-dropping mechanism that is similar to sky crane heavy-lift helicopter. The landing of the rover begins first with entry into the Mars atmosphere protected by a heat shield. At about 6 miles to the surface, the heat shield is jettisoned and a parachute is deployed to glide the rover smoothly. When the rover touches 3 miles above the surface, the parachute is jettisoned and the eight motors rocket backpack is used for a smooth and impact free landing as shown in the image. Here is an animation created by NASA on the landing sequence. If you are interested in getting more detailed information about the landing process check this landing sequence picture available on NASA website 4. Equipped with Star Wars style laser gun Hollywood movie directors and novelist always imagined aliens coming to earth with spaceships full of laser guns and blasting the objects which comes on their way. With Curiosity the equations are going to change. It has a powerful laser gun equipped in one of it’s arms to beam laser on rocks to vaporize them. This is not part of any assault mission Curiosity is expected to carry out, the laser gun is will be used to carry out experiments to detect life and understand nature. 5. Most sophisticated laboratory powered by 10 instruments Around 10 state of art instruments are part of Curiosity rover and the these 10 instruments form a most advanced rover based lab ever built by NASA. There are instruments to cut through rocks to examine them and other instruments will search for organic compounds. Mounted cameras can study targets from a distance, arm mounted instruments can study the targets they touch. Microscopic lens attached to the arm can see and magnify tiny objects as tiny as 12.5 micro meters. 6. Rover Carrying 1.24 million names etched on silicon Early June 2009 NASA launched a campaign called “Send Your Name to Mars” and around 1.24 million people registered their names through NASA’s website. All those 1.24 million names are etched on Silicon chips mounted onto Curiosity’s deck. If you had registered your name in the campaign may be your name is going to reach Mars soon. Curiosity On Web If you wish to follow the mission here are few links to help you NASA’s Curiosity Web Page Follow Curiosity on Facebook Follow @MarsCuriosity on Twitter Artistic Gallery Image of Mars Rover Curiosity A printable sheet of Curiosity Mission [pdf] Images credit: NASA This article titled,6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• 6 Reasons Why You Can’t Move Your Cell Phone To Any Carrier You Want

  - by Chris Hoffman

  You can buy a laptop or Wi-Fi tablet and use it on Wi-Fi anywhere in the world, so why are cell phones and devices with mobile data not portable between different cellular networks in the same country? Unlike with Wi-Fi, there are many different competing cellular network standards — both around the world and within countries. Cellular carriers also like locking you to their specific network and making it difficult to move. That’s what contracts are for. Phone Locking Many phones are sold locked to a specific network. When you buy a phone from a cellular carrier, they often lock that phone to their network so you can’t take it to a competitor’s network. That’s why you’ll often need to unlock a phone before you can move it to a different cellular provider or take it to a different country and use it on a local provider instead of roaming. Cellular carriers will generally unlock your phone for you as long as you’re no longer in a contract with them. However, unlocking a cell phone you’ve paid for without your carrier’s permission is currently a crime in the USA. GSM vs. CDMA Some cellular networks use the GSM (Global System for Mobile Communications) standard, while some use CDMA (Code-division multiple access). Worldwide, most cellular networks use GSM. In the USA, both GSM and CDMA are popular. Verizon, Sprint, and other carriers that use their networks use CDMA. AT&T, T-Mobile, and other carriers that use their networks are use GSM. These are two competing standards and are not interoperable. This means you can’t simply take a phone from Verizon to T-Mobile, or from AT&T to Sprint. These carriers have incompatible phones. CDMA Restrictions CDMA is more restricted than GSM. GSM phones have SIM cards. Simply open the phone, pop out the SIM card, and pop in a new SIM card to switch carriers. (In reality, it’s more complicated thanks to phone locking and other factors here.) CDMA phones don’t have removable modules like this. All CDMA phones ship locked to a specific network and you’d have to get both your old carrier and your new carrier to cooperate to switch phones between them. In reality, many people just consider CDMA phones eternally locked to a specific carrier. Frequencies Different cellular networks throughout the USA and the rest of the world use different frequencies. These radio frequencies have to be supported by your phone’s hardware or your phone simply can’t work on a network using those frequencies. Many GSM phones support three or four bands of frequencies — 900/1800/1900 MHz, 850/1800/1900 MHz, or 850/900/1800/1900 MHz. These are sometimes called “world phones” because they allow easier roaming. This allows the manufacturer to produce a phone that will support all GSM networks in the world and allows their customers to travel with those phones. If your phone doesn’t support the appropriate frequencies, it won’t work on certain networks. LTE Bands When it comes to newer, faster LTE networks, different frequencies are still a concern. LTE frequencies are generally known as “LTE bands.” To use a smartphone on a certain LTE network, that smartphone will have to support that LTE network’s frequency. Different models of phones are often created to work on different LTE networks around the world. However, phones are generally supporting more and more LTE networks and becoming more and more interoperable over time. SIM Card Sizes The SIM cards used in GSM phones come in different sizes. Newer phones use smaller SIM cards to save space and be more compact. This isn’t a big obstacle, as the different sizes of SIM cards — full-size SIM, mini-SIM, micro-SIM, and nano-SIM are actually compatible. The only difference between them is the size of the plastic card surrounding the SIM’s chip. The actual chip is the same size between all the SIM cards. This means you can take an old SIM card and cut the plastic off until it becomes a smaller-size SIM card that fits in a modern phone. Or, you can take a smaller-size SIM card and insert it into a tray so that it becomes a larger-size SIM card that fits in an older phone. Be aware that it’s very possible to damage your SIM card and make it not work properly by cutting it to the wrong dimensions. Your cellular carrier will often be able to cut your SIM card for you or give you a new one if you want to use an old SIM card in a new phone. Hopefully they won’t overcharge you for this service, too. Be sure to check what types of networks, frequencies, and LTE bands your phone supports before trying to move it between networks. You may have to buy a new phone when moving between certain cellular carriers. Image Credit: Morgan on Flickr, 22n on Flickr

  Read the article

• APC fragmention woes on Apache AWS EC2 Small instance with WordPress and W3TC

  - by two7s_clash

  AWS EC2 Small instance, Apache 2 running WordPress and W3TC. Within an hour, my APC fragmentation hits 100%. My APC settings are: apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 100M apc.optimization = 0 apc.num_files_hint = 512 apc.user_entries_hint = 1024 apc.ttl = 7200 apc.user_ttl = 7200 apc.gc_ttl = 3600 apc.cache_by_default = 1 apc.use_request_time = 1 apc.filters = "apc\.php$" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 2M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.rfc1867 = 0 apc.rfc1867_prefix = "upload_" apc.rfc1867_name = "APC_UPLOAD_PROGRESS" apc.rfc1867_freq = 0 apc.localcache = 0 apc.localcache.size = 256M apc.coredump_unmap = 0 apc.stat_ctime = 0 apc.canonicalize = 1 apc.lazy_functions = 0 apc.lazy_classes = 0 /etc/php.d/apc.ini More poop can be seen here. Mostly cribed settings from here. The shm was meant to be whittled down from such a high value after some observation, but apparently such a large value isn't even high enough.... I found an similar question/answer here. I do have some virtual hosts setup, but they aren't being touched much at all. Having users logged into the admin panel of WP does make things worse, but that's certainly not the main culprit. The question asker seems to suggest that it turns out W3TC is probably causing the problem, which the plugin author seems to agree with, but there aren't any helpful details beyond that. Why is it causing the problem? Do I just take it for now and turn off object caching with APC? Is there nothing I can do? Does having it turned on without being used for object caching actually help anything? Would memcache be an ok substitute just for object caching here? Finally, maybe I just shouldn't worry so much about the fragmentation?

  Read the article

• AWS: setting up auto-scale for EC2 instances

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/16/aws-setting-up-auto-scale-for-ec2-instances.aspxWith Amazon Web Services, there’s no direct equivalent to Azure Worker Roles – no Elastic Beanstalk-style application for .NET background workers. But you can get the auto-scale part by configuring an auto-scaling group for your EC2 instance. This is a step-by-step guide, that shows you how to create the auto-scaling configuration, which for EC2 you need to do with the command line, and then link your scaling policies to CloudWatch alarms in the Web console. I’m using queue size as my metric for CloudWatch,  which is a good fit if your background workers are pulling messages from a queue and processing them.  If the queue is getting too big, the “high” alarm will fire and spin up a new instance to share the workload. If the queue is draining down, the “low” alarm will fire and shut down one of the instances. To start with, you need to manually set up your app in an EC2 VM, for a background worker that would mean hosting your code in a Windows Service (I always use Topshelf). If you’re dual-running Azure and AWS, then you can isolate your logic in one library, with a generic entry point that has Start() and Stop()  functions, so your Worker Role and Windows Service are essentially using the same code. When you have your instance set up with the Windows Service running automatically, and you’ve tested it starts up and works properly from a reboot, shut the machine down and take an image of the VM, using Create Image (EBS AMI) from the Web Console: When that completes, you’ll have your own AMI which you can use to spin up new instances, and you’re ready to create your auto-scaling group. You need to dip into the command-line tools for this, so follow this guide to set up the AWS autoscale command line tool. Now we’re ready to go. 1. Create a launch configuration This launch configuration tells AWS what to do when a new instance needs to be spun up. You create it with the as-create-launch-config command, which looks like this: as-create-launch-config sc-xyz-launcher # name of the launch config --image-id ami-7b9e9f12 # id of the AMI you extracted from your VM --region eu-west-1 # which region the new instance gets created in --instance-type t1.micro # size of the instance to create --group quicklaunch-1 #security group for the new instance 2. Create an auto-scaling group The auto-scaling group links to the launch config, and defines the overall configuration of the collection of instances: as-create-auto-scaling-group sc-xyz-asg # auto-scaling group name --region eu-west-1 # region to create in --launch-configuration sc-xyz-launcher # name of the launch config to invoke for new instances --min-size 1 # minimum number of nodes in the group --max-size 5 # maximum number of nodes in the group --default-cooldown 300 # period to wait (in seconds) after each scaling event, before checking if another scaling event is required --availability-zones eu-west-1a eu-west-1b eu-west-1c # which availability zones you want your instances to be allocated in – multiple entries means EC@ will use any of them 3. Create a scale-up policy The policy dictates what will happen in response to a scaling event being triggered from a “high” alarm being breached. It links to the auto-scaling group; this sample results in one additional node being spun up: as-put-scaling-policy scale-up-policy # policy name -g sc-psod-woker-asg # auto-scaling group the policy works with --adjustment 1 # size of the adjustment --region eu-west-1 # region --type ChangeInCapacity # type of adjustment, this specifies a fixed number of nodes, but you can use PercentChangeInCapacity to make an adjustment relative to the current number of nodes, e.g. increasing by 50% 4. Create a scale-down policy The policy dictates what will happen in response to a scaling event being triggered from a “low” alarm being breached. It links to the auto-scaling group; this sample results in one node from the group being taken offline: as-put-scaling-policy scale-down-policy -g sc-psod-woker-asg "--adjustment=-1" # in Windows, use double-quotes to surround a negative adjustment value –-type ChangeInCapacity --region eu-west-1 5. Create a “high” CloudWatch alarm We’re done with the command line now. In the Web Console, open up the CloudWatch view and create a new alarm. This alarm will monitor your metrics and invoke the scale-up policy from your auto-scaling group, when the group is working too hard. Configure your metric – this example will fire the alarm if there are more than 10 messages in my queue for over a minute: Then link the alarm to the scale-up policy in your group: 6. Create a “low” CloudWatch alarm The opposite of step 4, this alarm will trigger when the instances in your group don’t have enough work to do (e.g fewer than 2 messages in the queue for 1 minute), and will invoke the scale-down policy. And that’s it. You don’t need your original VM as the auto-scale group has a minimum number of nodes connected. You can test out the scaling by flexing your CloudWatch metric – in this example, filling up a queue from a  stub publisher – and watching AWS create new nodes as required, then stopping the publisher and watch AWS kill off the spare nodes.

  Read the article

• Is it possible to shrink the size of an HP Smart Array logical drive?

  - by ewwhite

  I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• How can i get more low memory with the following setup:

  - by user539484

  Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- MSDOS 14 317 (14K) 14 317 (14K) 0 (0K) HIMEM 1 120 (1K) 1 120 (1K) 0 (0K) EMM386 3 120 (3K) 3 120 (3K) 0 (0K) OAKCDROM 36 064 (35K) 36 064 (35K) 0 (0K) POWER 80 (0K) 80 (0K) 0 (0K) NLSFUNC 2 784 (3K) 2 784 (3K) 0 (0K) COMMAND 2 928 (3K) 2 928 (3K) 0 (0K) MSCDEX 15 712 (15K) 15 712 (15K) 0 (0K) SMARTDRV 30 384 (30K) 13 984 (14K) 16 400 (16K) KEYB 6 752 (7K) 6 752 (7K) 0 (0K) MOUSE 17 296 (17K) 17 296 (17K) 0 (0K) DISPLAY 8 336 (8K) 0 (0K) 8 336 (8K) SETVER 512 (1K) 0 (0K) 512 (1K) DOSKEY 4 144 (4K) 0 (0K) 4 144 (4K) POWER 4 672 (5K) 0 (0K) 4 672 (5K) Free 552 944 (540K) 539 088 (526K) 13 856 (14K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 653 312 114 224 539 088 Upper 47 920 34 064 13 856 Reserved 0 0 0 Extended (XMS)* 64 898 256 2 671 824 62 226 432 ---------------- ---------- ---------- ---------- Total memory 65 599 488 2 820 112 62 779 376 Total under 1 MB 701 232 148 288 552 944 Total Expanded (EMS) 33 947 648 (33 152K Free Expanded (EMS)* 33 538 048 (32 752K * EMM386 is using XMS memory to simulate EMS memory as needed. Free EMS memory may change as free XMS memory changes. Largest executable program size 538 976 (526K) Largest free upper memory block 7 488 (7K) MS-DOS is resident in the high memory area. I'm running MS-DOS 6.22 on VMWare virtual hardware. This is memory state after memmaker pass, so i'm looking for optimization beyond memmaker. Note: NLS drivers (DISPLAY, KEYB, NSLFUNC) are essential for me. Thanks to @mtone for valuable reminder about MSCDEX /E which gave me 16KiB of low memory (see the diff)!

  Read the article

• mpirun -np N, what if N is larger than my core number?

  - by Daniel

  Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• Automatically Kill/Restart Process(es) When Memory is Critically Low

  - by nemesisfixx

  I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

  Read the article

• How do I prove or disprove "god" objects are wrong?

  - by honestduane

  Problem Summary: Long story short, I inherited a code base and an development team I am not allowed to replace and the use of God Objects is a big issue. Going forward, I want to have us re-factor things but I am getting push-back from the teams who want to do everything with God Objects "because its easier" and this means I would not be allowed to re-factor. I pushed back citing my years of dev experience, that I'm the new boss who was hired to know these things, etc, and so did the third party offshore companies account sales rep, and this is now at the executive level and my meeting is tomorrow and I want to go in with a lot of technical ammo to advocate best practices because I feel it will be cheaper in the long run (And I personally feel that is what the third party is worried about) for the company. My issue is from a technical level, I know its good long term but I'm having trouble with the ultra short term and 6 months term, and while its something I "know" I cant prove it with references and cited resources outside of one person (Robert C. Martin, aka Uncle Bob), as that is what I am being asked to do as I have been told having data from one person and only one person (Robert C Martin) is not good enough of an argument. Question: What are some resources I can cite directly (Title, year published, page number, quote) by well known experts in the field that explicitly say this use of "God" Objects/Classes/Systems is bad (or good, since we are looking for the most technically valid solution)? Research I have already done: I have a number of books here and I have searched their indexes for the use of the words "god object" and "god class". I found that oddly its almost never used and the copy of the GoF book I have for example, never uses it (At least according to the index in front of me) but I have found it in 2 books per the below, but I want more I can use. I checked the Wikipedia page for "God Object" and its currently a stub with little reference links so although I personally agree with that it says, It doesn't have much I can use in an environment where personal experience is not considered valid. The book cited is also considered too old to be valid by the people I am debating these technical points with as the argument they are making is that "it was once thought to be bad but nobody could prove it, and now modern software says "god" objects are good to use". I personally believe that this statement is incorrect, but I want to prove the truth, whatever it is. In Robert C Martin's "Agile Principles, Patterns, and Practices in C#" (ISBN: 0-13-185725-8, hardcover) where on page 266 it states "Everybody knows that god classes are a bad idea. We don't want to concentrate all the intelligence of a system into a single object or a single function. One of the goals of OOD is the partitioning and distribution of behavior into many classes and many function." -- And then goes on to say sometimes its better to use God Classes anyway sometimes (Citing micro-controllers as an example). In Robert C Martin's "Clean Code: A Handbook of Agile Software Craftsmanship" page 136 (And only this page) talks about the "God class" and calls it out as a prime example of a violation of the "classes should be small" rule he uses to promote the Single Responsibility Principle" starting on on page 138. The problem I have is all my references and citations come from the same person (Robert C. Martin), and am from the same single person/source. I am being told that because he is just one guy, my desire to not use "God Classes" is invalid and not accepted as a standard best practice in the software industry. Is this true? Am I doing things wrong from a technical perspective by trying to keep to the teaching of Uncle Bob? God Objects and Object Oriented Programming and Design: The more I think of this the more I think this is more something you learn when you study OOP and its never explicitly called out; Its implicit to good design is my thinking (Feel free to correct me, please, as I want to learn), The problem is I "know" this, but but not everybody does, so in this case its not considered a valid argument because I am effectively calling it out as universal truth when in fact most people are statistically ignorant of it since statistically most people are not programmers. Conclusion: I am at a loss on what to search for to get the best additional results to cite, since they are making a technical claim and I want to know the truth and be able to prove it with citations like a real engineer/scientist, even if I am biased against god objects due to my personal experience with code that used them. Any assistance or citations would be deeply appreciated.

  Read the article

• How can I run Gnome or KDE locally in Cygwin?

  - by John Peter Thompson Garcés

  Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

  Read the article

• How to make creating viewmodels at runtime less painful

  - by Mr Happy

  I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painful. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genius since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use a DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an in-depth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

  Read the article

• MySQL Server hitting 100% unexpectedly (Amazon AWS RDS)

  - by Luc

  Please help! We've been struggling with this one for months. This week we upped our RDS instance to the highest performing instance and although the occurrences have reduced, we're still having our DB all of a sudden hit 100%. It comes out of nowhere. Sometimes 2am, sometimes midday. I've ruled out a DOS - our pages access logs have normal traffic I've ruled out memcached suddenly dieing (hits and misses continue as normal). The SHOW PROCESSLIST while we have issues reports about 500 queries in queue. If I kill them off or restart the server, they just keep coming back and then eventually out of knowhere, our server resumes back to normal. Sometimes up to 3 hours. Our bad performing queries take .02 seconds to execute when the server eventually returns back to normal but while we're in this 100% CPU physco phase, those queries never finish executing. Please help!!!!! Anybody know anything about MYSQL query optimization? Could it be the server deciding to use different indexes all of a sudden, which puts it into a spiral?

  Read the article

• Estimating compressed file size using a list parameter

  - by Sai

  I am currently compressing a list of files from a directory in the following format: tar -cvjf test_1.tar.gz -T test_1.lst --no-recursion The above command will compress only those files mentioned in the list. I am doing this because this list is generated such that it fits a DVD. However, during compression the compression rate decreases the estimated file size and there is abundant space left in the DVD. This is something like a Knapsack algorithm. I would like to estimate the compressed file size and add some more files to the list. I found that it is possible to estimate file size using the following command: tar -cjf - Folder/ | wc -c This command does not take a list parameter. Is there a way to estimate compressed file size? I am also looking into options like perl scripts etc. Edit: I think I should provide more information since I have been doing a lot of web search. I came across a perl script(Link)that sort of emulates the Knapsack algorithm. The current problem with the above mentioned script is that it splits the files in their original state. When I compress the files after splitting them, there are opportunities for adding more files which I consider to be inefficient. There are 2 ways I could resolve the inefficiency: a) Compress individual files and save them in a directory using a script. The compressed file could provide a best estimate. I could generate a script using a folder of compressed files and use them on the uncompressed ones. b) Check whether the compressed file's size is less than the required size. If so, I should keep adding files until I meet the requirement. However, the addition of new files to the compressed file is an optimization problem by itself.

  Read the article

• MVVM - how to make creating viewmodels at runtime less painfull

  - by Mr Happy

  I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by homli322

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

• HyperV - low CPU usage

  - by Klark

  I am very new to HyperV and virtual machine philosophy in general, so please expect more or less nooby questions :) I have a server that is only used as a host for virtual machines. OS is windows server 2008 R2 and it is running on 16 CPU and 48 GBs of RAM. On aforementioned server there are 8 VMs, each having 4 CPUs and 4 GBs of RAM. On those VMs we are running some CPU intensive tasks. Each machine has nearly 100% cpu usage. After I noticed slow performance I went to the host machine and started playing with process explorer. It turned out that cpu usage is very low. Also I/O is very low, and of course, memory consumption is high, which is expected. Of course, I don't expect that those 4 virtual cores dedicated to a VM work as fast as real, hardware 4 cores, but still I expected a higher consumption of real hardware. Is this sort of behaviour normal? I see that the most of CPU usage on host machine are marked as interrupts (which I guess is normal) and all those interrupts are passed to only one core (which is strange). Are there out of box optimization that I could perform to finally use all that processing power that is under the hood. My knowledge of virtualization technology is near to embarrassing, so I would be grateful for any links that could enlightened me :) Thanks.

  Read the article

• Why is my apache2, mod_fcgid, php configuration causing 100% cpu usage?

  - by Scott Lundgren

  Page load makes a quick initial connection, then hangs about 10 seconds before the page renders. When the server load goes up I start watching top & I see that both CPUs get pegged at times to 100% by between 4-8 processes of php-cgi. My theory is that since I never see RAM usage never go above 50%, that apache is able to handle the requests coming in, but is queueing them for PHP to process. What is wrong with my mod_fcgid/php configuration ? RHEL 5.4 2 Xeon E5420s @ 2.50 Ghz 4 Gb RAM Apache 2.2.3 Timeout 30 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 5 <IfModule worker.c> StartServers 2 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> mod_fcgid 2.2.10 LoadModule fcgid_module modules/mod_fcgid.so <IfModule !mod_fastcgi.c> AddHandler fcgid-script fcg fcgi fpl php </IfModule> SocketPath run/mod_fcgid SharememPath run/mod_fcgid/fcgid_shm DefaultInitEnv PHPRC "/etc/" FCGIWrapper /usr/bin/php-cgi .php MaxRequestsPerProcess 1500 MaxProcessCount 20 IPCCommTimeout 240 IdleTimeout 240 APC 3.0.19 extension = apc.so apc.enabled=1 apc.shm_segments=1 apc.optimization=0 apc.shm_size=32 apc.ttl=7200 APC cache is 43% used with a 99% hit rate

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by user57999

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >