Search Results

Search found 171496 results on 6860 pages for 'not joe bloggs'.

Page 148/6860 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• External USB HD issues with a twist (works on Windows7 but not XP)

  - by Eruditass

  I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

  Read the article

• OS X will not register newly installed network adapters

  - by Chris

  I have purchased an Edimax 7318USg and tested it on a Windows machine (works). The installation process for the software for this adapter runs smoothly. However, OS X simply does not recognize new network adapters. When you go to System Preferences/Network, a new network adapter should be present/there should be an alert. This is not the case. Why might this be? Is there a setting I may reset to force the operating system to recognize this? Thanks!

  Read the article

• Wake On Lan only works on first boot, not sequent ones

  - by sp3ctum

  I have converted my old Dell Latitude D410 laptop to a server for tinkering. It is running an updated Debian Squeeze (6) with a Xen enabled kernel (I want to toy with virtual machines later on). I am running it 'headless' via an ethernet connection. I am struggling to enable Wake On Lan for the box. I have enabled the setting in the BIOS, and it works nicely, but only for the first time after the power cord is plugged in. Here is my test: Plug in power cord, don't boot yet Send magic Wake On Lan packet from test machine (Ubuntu) using the wakeonlan program Server expected to start (does every time) Once server has booted, log in via ssh and shut it down via the operating system After shutdown, wake server up via WOL again (fails every time) Some observations: Right after step 1 I can see the integrated NIC has a light on. I deduce this means the NIC gets adequate power and that the ethernet cable is connected to my switch. This light is not on after step 4 (the shutdown stage). The light becomes back on after I disconnect and reconnect the power cord, after which WOL works as well. After step 4 I can verify that wake on lan is enabled via the ethtool program (repeatable each time) This blog post suggested the problem may lay in the fact the motherboard might not be giving adequate power to the NIC after shutdown, so I copied an acpitool script that supposedly should signal the system to give the needed power to the card when shut down. Obviously it did not fix my issue. I have included the relevant power settings in the paste below. I have tried different combinations of parameters of shutdown (the program) options, as well as the poweroff program. I even tried "telinit 0", which I figured would do the most direct boot via software. If I keep the laptop's power button pressed down and do a hard boot this way, the light on the ethernet port stays lit and a WOL is possible. I copied a bunch of hopefully useful information in this paste I have tried this with the laptop battery connected and without it. I get the same result. Promptly pressing the power button causes the system to shut down with the message "The system is going down for system halt NOW!", and WOL is still unsuccessful.

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• Debian Testing install USB menu does not respond to keyboard

  - by neurolysis

  I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, and installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing. I did some searching and couldn't find anything that looked similar. Any ideas?

  Read the article

• CURL on PHP 5.2 works in CLI but not in IIS

  - by Ben Reisner

  I have a Windows 2003 Server running IIS with php 5.2.8, I'm trying to use CURL, and it works in CLI mode (if i execute php.exe) but it does not seem to be registered when running under IIS. The output of PHP info in both CLI and IIS show the same 'Loaded Configuration File', but under IIS it does not give the CURL info box. c:\program files\php\php.exe -i shows ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... curl cURL support => enabled cURL Information => libcurl/7.16.0 OpenSSL/0.9.8i zlib/1.2.3 phpinfo() ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... NOTE: This server also runs php 5.3 in c:\program files\php-5.3.0 and CURL does properly work with that installation.

  Read the article

• Unable to log into Windows XP Pro Domain Not Available

  - by Belliez

  Trying to access an old laptop I have but at the windows login screen I attempt to log in and get the message "Unable to log in because is unavailable". This laptop is not on a domain or a network and I do not know the computer name. I have blanked the passwords of the local administrator and user account using Offline NT Password and Registry Editor but still unable to log in? Any advice would be grateful or if you can point me to the registry location I can edit or delete to remove the domain. Thanks

  Read the article

• Postgresql init.d script not working

  - by Bram Jetten

  I installed Postgresql 8.4 on my VPS with Ubuntu 10.04. Default setup, nothing unusual. After the installation the dbserver is automatically started and is running great. The installer also sets a init.d script in place. This script however, doesn't seem to affect Postgres. $ sudo /etc/init.d/postgresql stop The above line is not stopping the server. The command does not fail or show any message. The logs won't say anything as well. After killing all postgres processes with killall I cannot get Postgres working again using the init script. When rebooting my VPS it somehow starts up and works again.

  Read the article

• Targus USB-to-RS232 not working with Linux?

  - by Ethan Leroy

  I have the Targus PA088 USB to RS232 converter, but it seems that it does not work with linux. Its RX and TX lights are flashing, but I can't see the data in minicom/picocom. When using it with Windows and hterm, everything's fine. Any idea what could be the problem? Additional info: When I plug in the adapter, I can see the following messages in /var/log/messages.log Nov 25 01:47:31 localhost kernel: [ 831.787066] usb 2-1.1: new full speed USB device number 5 using ehci_hcd Nov 25 01:47:32 localhost kernel: [ 832.554810] mct_u232 2-1.1:1.0: MCT U232 converter detected Nov 25 01:47:32 localhost kernel: [ 832.555002] usb 2-1.1: MCT U232 converter now attached to ttyUSB0 Nov 25 01:47:32 localhost mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1" Nov 25 01:47:32 localhost mtp-probe: bus: 2, device: 5 was not an MTP device

  Read the article

• Public folder not visible from front end Exchange 2003 Server

  - by Kyle Brandt

  I have a public folder that does not receive emails when the emails are sent via the Front-End Exchange Servers. When I go into the System Manager on the Front-End I don't see this particular public folder listed under the Public Folders. However, I do see it listed from the Front-End server. I see the emails that are not making it to the public folder listed in the local delivery queue on the front end server and they are in a retry state. Does anyone know how I might troubleshoot this?

  Read the article

• Using Bazaar (BZR) on AFT or SMB mounted server not wroking

  - by Dan Berlyoung

  Has anyone been able to get BZR working on a mounted AFT or SMB mounted share? I've tried both (The AFP volume is actually coming off an Xserver.) and neither work. I have BZR 2.0.0 and am running it on a Mac with 10.5. I keep getting an error like this bzr: ERROR: Could not acquire lock "/Volumes/joeserver/Documents/bzr/remote_test/.bzr/checkout/dirstate": [Errno 45] Operation not supported I googled around a bit but only found a fairly stale (2007) bug report on launchad.com (Bug #313625 to be specific.) Any ideas?

  Read the article

• Flash not working in Safari on OS X 10.5

  - by bhuga

  About 2 weeks ago my browsers started bothering me to upgrade flash. Eventually, I did, and now I have no flash at all in Safari. I downloaded and installed the newest flash installer from Adobe. Firefox works fine. Safari does not, I just get the blue lego and a 'No handler for this content type' message. Other plugins, such as 1Password, seem fine. I have tried: Reinstalling flash umpteen times Deleting /Library/Internet Plug-Ins/Flash Player.plugin and flashplayer.xpt Deleting ~/Library/Application Data/Safari I'm not sure what else to do.

  Read the article

• Windows redirect traffic to different DNS name not fixed IP address (hosts file equivalent)

  - by Arik Raffael Funke

  Using the Windows hosts file, one can redirect traffic for a domain to a specific IP address, e.g. domainA.com -- 127.0.0.1 I am looking for a SIMPLE way to do the same, but for a target domain name not for a target IP address (as this is dynamic), I.e. domainA.com -- domainB.com Addition: After the getting some initial answers I think I need to concretise my question. Situation: I have an application which looks up the IP of the target domain via DNS and then connects via HTTP to the IP address. I do not have control over any proxy settings. Option 1 Basically I am looking for a way to: intercept DNS requests for a domainA.com launch a DNS request for a domainB.com serve the IP of domainB.com in response to the request for domainA.com Without running an entire DNS server. Option 2 If a DNS server is the only way, in the alternative I would also be happy with an solution to how to define a non-standard DNS-server for a single application. Any ideas for wrapper applications, etc?

  Read the article

• Internet Working, Browsing Not.

  - by jeffreypriebe

  I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

  Read the article

• apcupsd on Linux does not report on APC BackUPS Pro 900

  - by lserni

  From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

  Read the article

• Error- D:\ is not accessible. Access is denied

  - by Aaron

  All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

  Read the article

• OpenSuSE 11 iscsi target: HFS+ partition not seen by clients

  - by radiopaque

  I have an openSuSE machine as a file server, which has an Areca 1880i inside. It contains several partitions. There is a dm-0 and a dm-1 partition, for example. The partitions are formatted as EFI system partitions, with HFS+ file systems. My opensuse could not read them but the iscsitarget exported them for my Macs. This worked for more than a year. For some reason now, after some network problems which were "solved", my dm-0 partition is not seen anymore! I suspect it is a problem on the iscsi target side, i.e. the OpenSuSE machine. Can anyone suggest what I should look into? Any logs, any settings on the linux machine? None of my macs can access the partition, and they use different client software!! Thanks!

  Read the article

• SSL FTP fails on Windows 7 but not Windows XP clients

  - by Andrew Neely

  We currently use a free SSL-FTP client called Move-It-Freely to transmit data from a custom data entry program at over forty facilities scattered around the state to our central server. Under XP, it works flawlessly. Some facilities have upgraded to Windows 7. On these machines, uploads (transfers to us) work, downloads (transfers from us to them) fail. Replacing the Windows 7 machine with an XP machine solves the problem. We have also verified that the network firewall settings have not changed. This problem persists even if Windows firewall is not running. We were able to remote into one of the Windows 7 machines to verify that the Windows firewall was indeed turned off. We cannot replicate the problem on our own Windows 7 machines, and are at a loss of how to fix this feature for our customers. The data contain health-related information, and needs to be encrypted (hence SSL-FTP.) Despite hours spent on Google, we cannot find a solution.

  Read the article

• ICQ offline messages (do not show up)

  - by Nils Riedemann

  Hi there, I have a weird problem with offline messages: I use Adium on 2 Macs (home and office) and Beejive (iPhone) for connecting to ICQ and other protocols. When someone sends me an offline messages I expect them to show up the next time I login with any of my 3 devices. But thats not the case. Recently some show up at the office, some at home and some on my iPhone – couldnt figure out any logic behind it, seems rather random. I thought for a while that it depends on the last device i have been logged in with. But thats not the case either. A friend can send me offline Messages during the weekend, i can login with my Mac at home or iPhone, yet in some cases it only shows up when logging in from office. Weird. It really freaks me out – and no, i can't make 'em go to jabber or the like. Anyone experiencing a similar problem?

  Read the article

• Visible Keylogger (ie not evil)

  - by Ben Haley

  I want keylogging software on my laptop for lifelogging purposes. But the software I can find is targeted towards stealth activity. Can anyone recommend a keylogging software targeted towards personal backup. Ideal Functionality Runs publicly (like in the task bar). Easy to turn off (via keyboard shortcut is best... at least via button click) Encrypted log Fast Free Cross platform ( windows at least ) The best I have found is pykeylogger which does not attempt to be stealthy, but does not attempt to be visible either. I want a keylogger focused on transparency, speed, and security so I can safely record myself. *note: Christian has a similar question with a different emphasis

  Read the article

• nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

  - by Sergey Osypchuk

  I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

  Read the article

• Windows scheduled task not running

  - by Ravi Kumar Singh

  I have several SQL server backups on a server. I have created a batch file which then copies these to network drives. These are mapped to the server, and it works properly. Now, I've created a scheduled task to do this. If I select "run the task when logged in", I can test the task. It works fine. However I cannot test it with the other option "run task if logged in or not". I've read that testing this task is not possible manually. However the task runs when we log off the server automatically.

  Read the article

• How to make iTunes download all podcast episodes irrespective of listened/not

  - by user15660

  I am a big iPod user (especially podcasts). I have used iPod touch, iPod classic and iPod nano. I noticed that iTunes stops downloading podcasts that you no longer listen to and stops downloading them. Is there a way to force iTunes to download all episodes of podcasts irrespective of whether you listen to them or not? I am not interested in just clicking a episode to make iTunes think that I'm listening. I need some kind of programmatic work around or batch script that runs and updates all podcasts/episodes automatically.

  Read the article

• Using Bazaar (BZR) on AFP or SMB mounted server not wroking

  - by Dan Berlyoung

  Has anyone been able to get BZR working on a mounted AFT or SMB mounted share? I've tried both (The AFP volume is actually coming off an Xserver.) and neither work. I have BZR 2.0.0 and am running it on a Mac with 10.5. I keep getting an error like this bzr: ERROR: Could not acquire lock "/Volumes/joeserver/Documents/bzr/remote_test/.bzr/checkout/dirstate": [Errno 45] Operation not supported I googled around a bit but only found a fairly stale (2007) bug report on launchad.com (Bug #313625 to be specific.) Any ideas?

  Read the article

• what damage can be caused if scandisk is not run before defrag

  - by Justin Gregoire

  Hello, I would like to know what the damage to a drive can be if a scandisk is not performed before a disk defrag. I have looked up some sites that say a scandisk should be run to correct any issues that may be apparent on the system, making sure that the drive is free of errors before a disk defrag is done. I have to perform a defrag on a computer without having physical access to it (using remote connection). I know that the scandisk requires a reboot to the system (causing me to lose my connection) which would be difficult to restart physically if the system does not come back on by itself once rebooted (this has happened before). Any suggestions? Thank you.

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >