Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 148/450 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Cannot access boot menu with compaq 8510p

  - by pinouchon

  I have a problem with my HP compaq 8510p laptop: when I start it, the fan starts and the power light is on, but the screen displays nothing. When I insert a bootable hard drive, it activates the hard drive light (meaning that the CD is recognized) but it stops after a few seconds. Same thing with any hard drive: the drive is recognized but does not boot. What I've tried so far: Changing the hard drive or booting with no hard drive (same problem) Plugging anoher display via VGA : no display on the other screen Inserting a windows-7 CD (same problem) Booting only on battery, with battery and power cable, only with power cable (same problem) So it looks like something is preventing the laptop from booting and displaying the boot menu. Do you have experienced something similar with a laptop ? What could be wrong ? The laptop is out of warranty. The system used to be windows-7 x64. Edit: I went to the help desk of my university. A guy took a look (he also tried to plug an external screen) and said that the computer is dead: on the HP laptops eventually the GPU card dies and so does the motherboard because they are linked. He saw this many times, and even if I can fix the problem, the laptop would crash again after a while. Do you have similar experience with HP laptops ? (mine is 4 years old) Edit 2: Believe it or not, my laptop is magically working again. I have no clue about what is going on. Now it is like starting and old car: when you turn it on you secretly hope it will actually start... With that said, I expect my laptop to break again in the near future (its an HP after all) and I will accept an answer or add my own accordingly. Edit 3: As expected, the laptop is down again. This time, sometimes when I power it up, it shuts down automatically after 3 seconds, sometimes not at all. In addition, when it does not shut down on its own, the power button does not work : the only way to shut it down is by unplugging the battery. As before, the screen is black, and only the power and battery lights are on. (the other ones: hard drive and wifi are off). I have tried to plug in another power plug, removing the battery and removing the hard drive without success. I might buy another laptop. I've brought the laptop to a repair shop. The problem is indeed that the graphic card is down. It will be replaced by a new one.

  Read the article

• Does installing windows format the hard disk?

  - by Jason

  My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

  Read the article

• Grub hangs intermittently on "Starting Up..."

  - by Griffo

  Hi all, I've had this problem for a while now. My linux server is set to wake-on-lan but occasionally it halts at Grubs "Starting Up..." and goes no further. This is not due to additional hardware being attached such as a flash drive or anything as I never plug anything into it. It may boot perfectly 40 times in a row and then hit this issue. Sometimes it gets the issue a couple of times in quick succession and doesn't happen for ages again. I'm not sure how to diagnose it since it doesn't seem to be reproducible. Any help much appreciated. Thanks

  Read the article

• Trying to move Users And Program Files Directories to Another Partition

  - by Jharwood

  Currently I've Followed this guide. I pointed my C:\Users, C:\Program Files (x86), and C:\Program Files directories to their respective counterparts on the B: drive. I used mklink /J D:\Users B:\Users (D was the C: drives name in recovery) but when the computer boots, all I get is that the profile can't be loaded. I have to accomplish this, and don't really mind reinstalling as its a fresh install anyway.

  Read the article

• Backup windows image to thumb drive?

  - by Dean

  I recently bought a new netbook from Malasia. It doesn't have a brand name, or officially supporting drivers. It came with a version of windows, and working drivers for all the hardware - but I want to install Ubuntu on here. Being a netbook, it has no CD/DVD drive. I want some free easy to use software to image the entire drive onto a thumb drive, which I could later use to boot up a recovery program to reinstall windows, should I fail to get all the hardware supported on Linux. I have already done some research and found driver backup/restore software in this thread, and will probably use that failing a more all-encompasing solution.

  Read the article

• Windows 7 Install command prompt can't access the C drive

  - by theouteredge

  I'm trying to create a new Windows 7 Professional VHD which I can dual boot to, following Scott Hanselman's guide to creating a bootable VHD. When I get to the command prompt in the Windows 7 installation and try to create a VHD or select/attach a pre-created VHD file I get an error saying that diskpart can't find the path specified. If I try and switch to the c drive using cd c: I see c:\ x:\something\> I already have a Windows 7 Ultimate install and my C drive is an SSD – if that makes a difference.

  Read the article

• My hard disk does't get recognized

  - by SteveL

  For a few days now I have a problem with my 500GB internal hard disk. I am on Linux Mint 13 but I have the same problem with my Windows installation. When running fdisk -l I can see my hard disk (same on BIOS) but I can't mount it even via the disk utility program. In Windows XP I can see it on the My Computer menu but when I click it, it say's: D:\ is not accessible The file or directory is corrupted and unreadable Is there a way to fix it? Or at least save some of my files and format it? Should I be thinking about the worst-case scenario e.g. my HDD is dead? Edit: The filesystem is NTFS.

  Read the article

• Cannot install boot camp 3.1 drivers on windows 7

  - by Chris

  Hi all, I have a 64 bit windows 7 install (thru bootcamp) on my 17" macbook pro, with the bootcamp 3.0 drivers. Whenever i run the apple software update to install the 3.1 drivers, it downloads and installs them, then reboots, and when i've rebooted, it's still stuck on version 3.0 according to 'about boot camp' on the system tray icon. I've tried installing several times, it keeps happening. Any ideas? Thanks

  Read the article

• How to renew permissions on existing partition after upgrade to Windows 7

  - by jayrdub

  My machine has 2 drives. I reformatted and upgraded from XP to Windows 7, but now all the permissions are messed up on the D: drive. What is the best practice for getting the permissions on the D: drive set up to coincide with the new users of the OS. Who should I make owner? And is there a way to clear out all the unknown user's in the D: drive's ACLs?

  Read the article

• Why am I having trouble loading Ubuntu alongside Windows as an application?

  - by STEVE PEAVEY

  I have two good CD ISO files. Both load OK, but when I boot to Ubuntu the screen is fragmented by dozens of white lines. Program works but is useless. I'm running Windows XP SP3 on D201GLY MB, CELERON CPU 220 1.02 GHZ, 512 RAM What could be my problem? CPU? Not enough RAM? Or maybe even the graphics card? to be clearer i am trying to load either ubuntu 8.04 or 9.04 inside windows as an aplication from known GOOD cd's. trying to load with the wubi installer that is loaded on the cd's. sis mirage graphics 32mb vid prosser sis 662.

  Read the article

• Best way to copy large amount of data between partitions

  - by skinp

  I'm looking to transfer data across 2 lv of an HP-UX server. I have a couple of those transfers to do, some of which are mostly binary (Oracle tablespace...) and some others are more text files (logs...). Used data size of the volumes is between 100Gb and 1Tb. Also, I will be changing the block size from 1K to 8K on some of these partitions... Things I'm looking for: Guarantees data integrity Fastest data transfer speed Keeps file ownership and permissions Right now, I've thought about dd, cp and rsync, but I'm not sure on the best one to use and the best way to use them...

  Read the article

• Why does Ubuntu 10.04 not see my hard drives?

  - by CT

  I am trying to install Ubuntu Desktop 10.04 64bit to a new machine. mobo = gigabyte x58a-ud3r cpu = i7 930 ssd = Kingston 64GB V+ hhd = wd 1tb black When the installation gets to the prepare partions step, no partitions are listed. Drives are recognized by BIOS and WinXP setup sees them. I have also tried Ubuntu 9.10. It does not see the drives also. Just searching around I found a suggestion to select "no dmraid" in additional options screen. This did not seem to help. Any ideas?

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• Ubuntu server boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

  Read the article

• Which CD Drive is used during boot if have multiple drives

  - by Mirage

  I have 7 CD Drives attached to my computer. Now i want to install Linux on computer. But i am not sure which drive is used when i boot. I tried once putting in any drive. The Linux starts but after sometime it says there is Ubuntu Live CD present. I tried pn computer with one drive and it worked perfectly

  Read the article

• How to remove unwanted entries in the grub boot loader

  - by Nrew

  How to remove unwanted entries in the grub boot loader? There is still an entry for vista even if its not existing anymore. And the Memtest entry its also not needed. How do I remove those from ubuntu 10.04

  Read the article

• Shrink NTFS Partition Windows 2003

  - by Coops

  We have an iSCSI target provided by a CentOS server attached to a Windows Server 2003 Standard box, formatted in NTFS. My question is this - I know we can resize the backend block device fine (LVM et al.), however how do you tell Windows the NTFS filesystem has shrunk afterwards? [note we want to shrink]. I'm imagining a world of pain if it's not done correctly! This is a production box, so ideally we'd like the process to keep the drive mounted and online during the process, but downtime can be scheduled if need be. 90% of what I've found on the subject so far basically involves using the 'ntfsresize' command in Linux to do the job -- but surely Windows can do this itself? Cheers!

  Read the article

• OS won’t boot during Visual Studio 2010 install on vista 64

  - by Noam Honig

  I am installing Visual Studio 2010 on a vista 64 bits machine. During the install it asked for a restart. Since that, vista won't load. I tried restore to previous good configuration - didn't help. I am only able to boot it using safe mode with networking. When I did that, it continued the vista part of the install (the screen with the 3 out of 3 updates) but after that when I restarted again - still fails.

  Read the article

• Computer loads BIOS, but won't load OS

  - by LEGEND383

  I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

  Read the article

• mdadm lvm and ext4 slowness - How can I speed it up?

  - by beatbreaker

  I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

  Read the article

• Which is the recommended filesystem for VMware Server / ESXi?

  - by elitalon

  We have a couple of servers in office with VMware Server as virtualization solution. We are planning an upgrade of our infrastructure. Some servers will remain with VMware Server, but we want to migrate some others to VMware ESXi. In both cases we are making a fresh install, and I wonder if there any suggestion/guidelines regarding the host filesystem and its partitions. EDIT: We are using local storage instead of SAN/NAS external storage, because we are not sure if it is worth it to use them given our office size/requirements.

  Read the article

• Computer restarts infinitely after Bios/Motherboard screen

  - by user13176

  Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

  Read the article

• Python Daemon Subprocess not working at boot

  - by Adam Richardson

  I am attempting to write a python daemon that will launch at boot. The goal of the script is to receive a job from our gearman load balancing server and complete the job. I am using the python-daemon module from pypi (http://pypi.python.org/pypi/python-daemon/). The nature of the job that it is completing is converting images in the orf (olympus raw image format) to jpeg. In order to accomplish this an outside program is used, ufraw in this case. The problem comes in when I start the daemon at boot, if I launch from the shell it runs perfectly and completes the work. When it starts at boot it is unable to launch the subprocess command. commandString = '/usr/bin/ufraw-batch --interpolation=four-color --wb=camera --compression=100 --output="' + outfile + '" --out-type=jpg --overwrite "' + infile + '"' args = shlex.split(commandString) process = subprocess.Popen(args).wait() I am not sure what I am doing wrong. Thanks for any help.

  Read the article

• Ubuntu option vanishes after setting up windows XP(?) [closed]

  - by Ravi

  I have installed both windows XP as well as Ubuntu 9.04 on my machine.I can choose between them using dual boot option at the startup.Up to this, it is fine. But unfortunately when my XP crashes, I need to install XP again.But when I do it,after installing XP successfully, dual boot option no longer appears at the startup. So the Ubuntu goes in vein. What is the problem here? How do I solve it?

  Read the article

• "Windows failed to start" loop with 0xc0000225. No install discs, EasyRE/USB iso hasn't worked

  - by mvidaure

  I've been suffering from this "Windows failed to start" loop with 0xc0000225 for 3 days now and I still can't fix it. The major problem is that I don't have any sort of installation disc. However, I have tried EasyRE via both CD and USB but both result in the same problem.  I try to perform an 'Automated Repair' on my computer and I get in red text "The selected partition is corrupted and could not be accessed or repaired. Please select a different drive to continue." It is also labeled as NO under Active. Since I do not have a the installation discs, I made a USB with a Windows_7_Recovery_Disc  iso (as shown here http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html) but it also doesn't work. I get a blue screen that says "RECOVERY You pc needs to be repaired. The application or operating system could not be uploaded because a required file is missing or contains errors... File:\WINDOWS\system32\winload.efi Error code: 0xc0000225 You'll need to use the recovery tools on your installation media. If you don't have any installation media, contact your system administrator or PC manufacturer." Thanks in advance! Miguel

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >