Search Results

Search found 3875 results on 155 pages for 'sha le'.

Page 148/155 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

    - by Lucidity
    Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

    Read the article

  • Squid external_acl_type Cannot run process

    - by Alex Rezistorman
    I want to restrict uploading for group of the users via squid. So I've choosen to use external_acl_type but after reload of the squid it returns error. WARNING: Cannot run '/usr/local/etc/squid/lists/newupload.sh' process. Permissions of newupload.sh and squid are the same. newupload.sh is executive. How can I solve this problem? Thnx in advance. newupload.sh #!/bin/sh while read line; do set -- $line length=$1 limit=$2 if [ -z "$length" ] || [ "$length" -le "$2" ]; then echo OK else echo ERR fi done Strings from squid.conf external_acl_type request_body protocol=2.5 %{Content-Lenght} /usr/local/etc/squid/lists/newupload.sh acl request_max_size external request_body 5000 http_access allow users request_max_size Squid version squid -v Squid Cache: Version 3.2.13 configure options: '--with-default-user=squid' '--bindir=/usr/local/sbin' '--sbindir=/usr/local/sbin' '--datadir=/usr/local/etc/squid' '--libexecdir=/usr/local/libexec/squid' '--localstatedir=/var' '--sysconfdir=/usr/local/etc/squid' '--with-logdir=/var/log/squid' '--with-pidfile=/var/run/squid/squid.pid' '--with-swapdir=/var/squid/cache/squid' '--enable-auth' '--enable-build-info' '--enable-loadable-modules' '--enable-removal-policies=lru heap' '--disable-epoll' '--disable-linux-netfilter' '--disable-linux-tproxy' '--disable-translation' '--enable-auth-basic=PAM' '--disable-auth-digest' '--enable-external-acl-helpers= kerberos_ldap_group' '--enable-auth-negotiate=kerberos' '--disable-auth-ntlm' '--without-pthreads' '--enable-storeio=diskd ufs' '--enable-disk-io=AIO Blocking DiskDaemon IpcIo Mmapped' '--enable-log-daemon-helpers=file' '--disable-url-rewrite-helpers' '--disable-ipv6' '--disable-snmp' '--disable-htcp' '--disable-forw-via-db' '--disable-cache-digests' '--disable-wccp' '--disable-wccpv2' '--disable-ident-lookups' '--disable-eui' '--disable-ipfw-transparent' '--disable-pf-transparent' '--disable-ipf-transparent' '--disable-follow-x-forwarded-for' '--disable-ecap' '--disable-icap-client' '--disable-esi' '--enable-kqueue' '--with-large-files' '--enable-cachemgr-hostname=proxy.adir.vbr.ua' '--with-filedescriptors=131072' '--disable-auto-locale' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd8.3' 'build_alias=amd64-portbld-freebsd8.3' 'CC=cc' 'CFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'LDFLAGS= -L/usr/local/lib' 'CPPFLAGS=-I/usr/local/include' 'CXX=c++' 'CXXFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'CPP=cpp' --enable-ltdl-convenience Related post: Restrict uploading for groups in squid http://squid-web-proxy-cache.1019090.n4.nabble.com/flexible-managing-of-request-body-max-size-with-squid-2-5-STABLE12-td1022653.html

    Read the article

  • Emails forwarded via postfix get flagged as spam and forged in Gmail

    - by Kendall Hopkins
    I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

    Read the article

  • NGINX MIME TYPE

    - by justanotherprogrammer
    I have my nginx conf file so that when ever a mobile device visits my site the url gets rewritten to m.mysite.com I did it by adding the following set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; break; } I got it from http://detectmobilebrowsers.com/ IT WORKS.But none of my images/js/css files load only the HTML. And I know its the chunk of code I mentioned above because when I remove it and visit m.mywebsite.com from my mobile device everything loads up.So this bit of code does SOMETHING to my css/img/js MIME TYPES. I found this out through the the console error messages from safari with the user agent set to iphone. text.cssResource interpreted as stylesheet but transferred with MIME type text/html. 960_16_col.cssResource interpreted as stylesheet but transferred with MIME type text/html. design.cssResource interpreted as stylesheet but transferred with MIME type text/html. navigation_menu.cssResource interpreted as stylesheet but transferred with MIME type text/html. reset.cssResource interpreted as stylesheet but transferred with MIME type text/html. slide_down_panel.cssResource interpreted as stylesheet but transferred with MIME type text/html. myrealtorpage_view.cssResource interpreted as stylesheet but transferred with MIME type text/html. head.jsResource interpreted as script but transferred with MIME type text/html. head.js:1SyntaxError: Parse error isaac:208ReferenceError: Can't find variable: head mrp_home_icon.pngResource interpreted as image but transferred with MIME type text/html. M_1_L_289_I_499_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_L_290_I_500_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_default.jpgResource interpreted as image but transferred with MIME type text/html. default_listing_image.pngResource interpreted as image but transferred with MIME type text/html. here is my whole nginx conf file just incase... worker_processes 1; events { worker_connections 1024; } http { include mime.types; include /etc/nginx/conf/fastcgi.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; #server1 server { listen 80; server_name mywebsite.com www.mywebsite.com ; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# #--------------- For Mobile Devices ----------------# set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; #rewrite ^(.*)$ $scheme://mywebsite.com/mobile/$1; #return 301 http://m.mywebsite.com; #break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever1 #server 2 server { listen 80; server_name m.mywebsite.com; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever2 }#http I could just detect the mobile browsers with php or javascript but i need to make the detection at the server level so that i can use the 'm' in m.mywebsite.com as a flag in my controllers (codeigniter) to serve up the right view. I hope someone can help me! Thank you!

    Read the article

  • OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

    - by Vladimir Kadalashvili
    I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

    Read the article

  • Low CPU performance with low usage and clock - Windows 8.1

    - by Daniele
    I recently deleted everything from my PC and reinstalled Windows 8.1 from scratch. When I first booted into Windows everything was extremely slow though the CPU usage was very low (about 1%). After installing some drivers the problem seemed to be solved, I was able to use my PC normally. Today I installed a game and I noticed a strange behavior: the game was playable but the performance worsened more and more in the time. This is the situation BEFORE opening the game (normal): This is AFTER some minutes inside the game (low CPU usage and clock): Some information about my system: PC: Sony Vaio S13 (SVS13A1C5E) OS: Windows 8.1 CPU: Intel Core i7-3520M 2.90GHz GPU(1): Intel HD Graphics 4000 GPU(2): NVIDIA GeForce GT 640M LE I tried searching for new drivers and other solutions but noting worked and I don't know what is the cause. I did not checked the temperatures but the fans are not running fast and the PC does not look overheated. Update: Max CPU Temp: 66°C, Max GPU Temp: 61°C The strange thing is that the GPU load is 99% (GPU-Z) and the fan is almost silent. Update 2: I had troubles with Sony Vaio software, I can't get the FN keys and the STAMINA/SPEED switch to work (it is a physical switch to enable/disable the Nvidia card and change the Power Profile). I'm saying this because I remember that before reinstalling Windows there was an option in the Vaio Control Center (now it is not there anymore) that allowed me to choose from something like "priority to performance (ventilation)" or "priority to silence". The current behavior looks like a "priority to silence", but I can't get the stamina-speed switch to work and so I don't see similar oprions in the Vaio Control Center. I don't know if the problem is related to this.

    Read the article

  • Resizing a LUKS encrypted volume

    - by mgorven
    I have a 500GiB ext4 filesystem on top of LUKS on top of an LVM LV. I want to resize the LV to 100GiB. I know how to resize ext4 on top of an LVM LV, but how do I deal with the LUKS volume? mgorven@moab:~% sudo lvdisplay /dev/moab/backup --- Logical volume --- LV Name /dev/moab/backup VG Name moab LV UUID nQ3z1J-Pemd-uTEB-fazN-yEux-nOxP-QQair5 LV Write Access read/write LV Status available # open 1 LV Size 500.00 GiB Current LE 128000 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 2048 Block device 252:3 mgorven@moab:~% sudo cryptsetup status backup /dev/mapper/backup is active and is in use. type: LUKS1 cipher: aes-cbc-essiv:sha256 keysize: 256 bits device: /dev/mapper/moab-backup offset: 3072 sectors size: 1048572928 sectors mode: read/write mgorven@moab:~% sudo tune2fs -l /dev/mapper/backup tune2fs 1.42 (29-Nov-2011) Filesystem volume name: backup Last mounted on: /srv/backup Filesystem UUID: 63877e0e-0549-4c73-8535-b7a81eb363ed Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131071616 Reserved block count: 0 Free blocks: 112894078 Free inodes: 32044830 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stride: 128 RAID stripe width: 128 Flex block group size: 16 Filesystem created: Sun Mar 11 19:24:53 2012 Last mount time: Sat May 19 13:29:27 2012 Last write time: Fri Jun 1 11:07:22 2012 Mount count: 0 Maximum mount count: 100 Last checked: Fri Jun 1 11:03:50 2012 Check interval: 31104000 (12 months) Next check after: Mon May 27 11:03:50 2013 Lifetime writes: 118 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 383bcbc5-fde9-4720-b98e-2d6224713ecf Journal backup: inode blocks

    Read the article

  • OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

    - by michael
    I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

    Read the article

  • Computer does not switch on after power outage

    - by cristian
    VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

    Read the article

  • Overclock Failed

    - by John
    This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

    Read the article

  • Usage of putty in command line from Hudson

    - by kij
    Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

    Read the article

  • LDAP over SSL with an EFI Fiery printer

    - by austinian
    I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

    Read the article

  • apache performance timing out

    - by Mike
    Im running a webserver where I'm hosting about 6-7 websites. Most of these websites get their content from MySQL which is hosted on the same server. Traffic average per day is about 500-600 unique visitors, about 150K hits per week. But for some reason sometimes websites send a timeout, OR sometimes websites dont load all images. I know that I should perhaps separate static content from dynamic content, but for now I think that's not a possibility. I would appreciate any suggestions on how could I improve the performance of apache, so it doesn't keep timing out. Server is running on Sempron LE 1300; 2.3GHz,512K Cache 2GB RAM 10Mbps/1Mbps Services: MySQL, ProFTPD, Apache. Private + Shared = RAM used Program ---------------------------------------------------- 1.2 MiB + 54.0 KiB = 1.2 MiB proftpd 4.1 MiB + 23.0 KiB = 4.1 MiB munin-node 20.8 MiB + 120.5 KiB = 20.9 MiB mysqld 47.3 MiB + 9.9 MiB = 57.3 MiB apache2 (22) top: Mem: 2075356k total, 1826196k used, 249160k free, Timeout 35 KeepAlive On MaxKeepAliveRequests 300 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 10 MinSpareServers 20 MaxSpareServers 20 MaxClients 60 MaxRequestsPerChild 1000 </IfModule> <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule>

    Read the article

  • Connecting a LAN to an OpenVPN server via a windows 7 client gateway

    - by user705142
    I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to assign static ip addresses to each client connection, with key authentication. It's working on my client machine (10.83.41.9), and when you go to the gateway IP address (10.83.41.1), it loads up the webapp. Now I really need the other computers on the client LAN to be able to connect to the webapp as well, via the windows machine. The client has a static IP address of 192.168.2.100 on the LAN, and I've enabled IP forwarding in windows (confirmed by ipconfig /all). In my router I've forwarded 10.83.41.1 / 255.255.255.255 to 192.168.2.100. In server.conf I have.. route 192.168.2.0 255.255.255.0 And in the office ccd.. ifconfig-push 10.83.41.9 10.83.41.10 iroute 192.168.2.0 255.255.255.0 The client log is as follows: Thu Mar 15 20:19:56 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Thu Mar 15 20:19:56 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Thu Mar 15 20:19:56 2012 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Thu Mar 15 20:19:56 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 LZO compression initialized Thu Mar 15 20:19:56 2012 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ] Thu Mar 15 20:19:56 2012 Socket Buffers: R=[8192->8192] S=[64512->64512] Thu Mar 15 20:19:56 2012 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ] Thu Mar 15 20:19:56 2012 Local Options hash (VER=V4): '9e7066d2' Thu Mar 15 20:19:56 2012 Expected Remote Options hash (VER=V4): '162b04de' Thu Mar 15 20:19:56 2012 UDPv4 link local: [undef] Thu Mar 15 20:19:56 2012 UDPv4 link remote: 111.65.224.202:1194 Thu Mar 15 20:19:56 2012 TLS: Initial packet from 111.65.224.202:1194, sid=ceb04c22 8cc6d151 Thu Mar 15 20:19:56 2012 VERIFY OK: depth=1, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 VERIFY OK: nsCertType=SERVER Thu Mar 15 20:19:56 2012 VERIFY OK: depth=0, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 Replay-window backtrack occurred [1] Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Mar 15 20:19:56 2012 [server] Peer Connection Initiated with 111.65.224.202:1194 Thu Mar 15 20:19:58 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Thu Mar 15 20:19:59 2012 PUSH: Received control message: 'PUSH_REPLY,route 10.83.41.1,topology net30,ping 10,ping-restart 120,ifconfig 10.83.41.9 10.83.41.10' Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: timers and/or timeouts modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: --ifconfig/up options modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: route options modified Thu Mar 15 20:19:59 2012 ROUTE default_gateway=192.168.2.1 Thu Mar 15 20:19:59 2012 TAP-WIN32 device [OpenVPN] opened: \\.\Global\{B32D85C9-1942-42E2-80BA-7E0B5BB5185F}.tap Thu Mar 15 20:19:59 2012 TAP-Win32 Driver Version 9.9 Thu Mar 15 20:19:59 2012 TAP-Win32 MTU=1500 Thu Mar 15 20:19:59 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.83.41.9/255.255.255.252 on interface {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} [DHCP-serv: 10.83.41.10, lease-time: 31536000] Thu Mar 15 20:19:59 2012 Successful ARP Flush on interface [45] {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} Thu Mar 15 20:20:04 2012 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up Thu Mar 15 20:20:04 2012 C:\WINDOWS\system32\route.exe ADD 10.83.41.1 MASK 255.255.255.255 10.83.41.10 Thu Mar 15 20:20:04 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Thu Mar 15 20:20:04 2012 Route addition via IPAPI succeeded [adaptive] Thu Mar 15 20:20:04 2012 Initialization Sequence Completed From the other machines I can ping 192.169.2.100, but not 10.83.41.1. In the how-to, it mentions "Make sure your network interface is in promiscuous mode." as well. I can't find in the windows network config, so this may or may not be part of it. Ideally this would be achieved without any special configuration the other LAN computers. Not sure how far I'm going to get on my own at this point, any ideas? Is there something I'm missing, or anything I should need to know?

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • FreeBSD ZFS RAID-Z2 performance issues

    - by Axel Gneiting
    I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

    Read the article

  • OpenVPN stopped working, what could have happened?

    - by jaja
    I have Openvpn, and it worked great when I used it on PC (Windows 8), then I copied all files (Certificates and config) to an Android 4 phone to use them. Now, Openvpn works on the phone, but not the PC. Specifically, when I open Google I get: The server at www.google.com can't be found, because the DNS lookup failed, but the VPN seems to be connected. I have a simple question, could the problem be because I copied the same files? Routing table before connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 =========================================================================== Routing table after connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 **.**.***.** 255.255.255.255 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Server conf:- port 1194 proto udp dev tun ca ca.crt cert myservername.crt key myservername.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 push "redirect-gateway def1" Client conf:- client dev tun proto udp remote 89.32.148.35 1194 resolv-retry infinite nobind persist-key persist-tun mute-replay-warnings ca ca.crt cert client1.crt key client1.key verb 3 comp-lzo redirect-gateway def1 Here is the log file:- Tue Dec 18 16:34:27 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Tue Dec 18 16:34:27 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Tue Dec 18 16:34:27 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Dec 18 16:34:27 2012 LZO compression initialized Tue Dec 18 16:34:27 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 18 16:34:27 2012 Socket Buffers: R=[65536-65536] S=[65536-65536] Tue Dec 18 16:34:27 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue Dec 18 16:34:27 2012 Local Options hash (VER=V4): '41690919' Tue Dec 18 16:34:27 2012 Expected Remote Options hash (VER=V4): '530fdded' Tue Dec 18 16:34:27 2012 UDPv4 link local: [undef] Tue Dec 18 16:34:27 2012 UDPv4 link remote: ..*.:1194 Tue Dec 18 16:34:27 2012 TLS: Initial packet from ..*.:1194, sid=4d1496ad 2079a5fa Tue Dec 18 16:34:28 2012 VERIFY OK: depth=1, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:28 2012 VERIFY OK: depth=0, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue Dec 18 16:34:29 2012 [myservername] Peer Connection Initiated with ..*.:1194 Tue Dec 18 16:34:32 2012 SENT CONTROL [myservername]: 'PUSH_REQUEST' (status=1) Tue Dec 18 16:34:32 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: timers and/or timeouts modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: --ifconfig/up options modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: route options modified Tue Dec 18 16:34:32 2012 ROUTE default_gateway=192.168.1.254 Tue Dec 18 16:34:32 2012 TAP-WIN32 device [Local Area Connection] opened: \.\Global{F0CFEBBF-9B1B-4CFB-8A82-027330974C30}.tap Tue Dec 18 16:34:32 2012 TAP-Win32 Driver Version 9.9 Tue Dec 18 16:34:32 2012 TAP-Win32 MTU=1500 Tue Dec 18 16:34:32 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Tue Dec 18 16:34:32 2012 Successful ARP Flush on interface [26] {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} Tue Dec 18 16:34:37 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD ..*. MASK 255.255.255.255 192.168.1.254 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 Initialization Sequence Completed

    Read the article

  • Allignment of ext3 partition on LVM RAID volume group

    - by John P
    I'm trying to add a partition on a LVM that resides on a RAID6 volume group and fdisk is complaining about the partition not residing on a physical sector boundry. My question is, how do you calculate the correct starting sector for a partition on a LVM? This partition will be formated ext3. Would it be better to just format the LVM directly instead of creating a new partition? Disk /dev/dedvol/backup: 2199.0 GB, 2199023255552 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 1048576 bytes / 8388608 bytes Disk identifier: 0x4e428f49 Device Boot Start End Blocks Id System /dev/dedvol/backup1 63 267349 2146982827+ 83 Linux Partition 1 does not start on physical sector boundary. lvdisplay /dev/dedvol/backup --- Logical volume --- LV Name /dev/dedvol/backup VG Name dedvol LV UUID OV2n5j-7LHb-exJL-t8dI-dU8A-2vxf-uIicCt LV Write Access read/write LV Status available # open 0 LV Size 2.00 TiB Current LE 524288 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 32768 Block device 253:1 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.55 TiB PE Size 4.00 MiB Total PE 3815448 Alloc PE / Size 3670016 / 14.00 TiB Free PE / Size 145432 / 568.09 GiB VG UUID 8fBcOk-aXGx-P3Qy-VVpJ-0zK1-fQgy-Cb691J

    Read the article

  • BugZilla XML RPC Interface

    - by Damo
    I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

    Read the article

  • Recommend a free temperature-monitoring utility for cores + video card, on Vista?

    - by smci
    Looking for your recommendations for a free temperature-monitoring utility, for my PC (Core 2) and graphics card for Vista. (Question reposted with the hyperlinks now I have 10 reputation). I don't want all the geeky details, I don't overclock, I don't see the need to mess with my fan speeds or motherboard settings, I just want something fairly basic to help with basic troubleshooting of intermittent overheats on video card and/or mobo: must run on Windows Vista (yes, don't laugh). ideally displays temperature when minimized to toolbar, and/or: automatically alerts me when temperature on either core or the video card exceeds a threshold ideally measures temperature of video card and system as well, not just the cores. HDD temperature is not necessary I think. logging is nice, graphs are also nice portability to Linux and Mac is nice Apparently Everest is the best paid option, but I'm not prepared to spend $40. I found the following free options, but no head-to-head at-a-glance comparison: CoreTemp (only does cores, not video card?) Open Hardware Monitor (nice graphs, displays when minimized to toolbar, no alerts) RealTemp (has alerts, works minimized, lightweight install) HWMonitor (no alerts, CNET: "[free version is] simple but effective") from CPUID CPUCool (not free: 21-day trialware, then $18) SpeedFan from Almico (too geeky, detail overload; CNET: "most users won't be able to make head or tail of the data this utility provides") Motherboard Monitor (CNET: not recommended, requires expert knowledge of your mobo, dangerous) Intel Thermal Analysis Tool (only does cores, not video card? has logging) Useful discussions I found: hardwarecanucks.com , superuser.com 1, 2 , forums.techarena.in (Update: I downloaded Real Temp 3.60 and it meets all my needs, the customizable alert temperature is great. Open Hardware Monitor seems to be the other one that mostly meets my needs, except no alerts; but it is portable. I tried SpeedFan but the interface is very cluttered, too much unnecessary detail (needs a Basic/Advanced mode and a revamp of the interface.) The answer to my underlying issue is nVidia Geforce LE 7500 video card which runs very hot.)

    Read the article

  • Host system resets (crashes) when using VMWare or VirtualBox and 64-bit guest systems

    - by sinni800
    I have been trying to install virtual systems on VMWare for a while now and encountered strange behaviour from my PC. The behaviour is as follows: On "automatic" virtualization mode it either outputs a cryptic error message (can MAYBE give later, if I can reproduce) right on startup (before even the BIOS) or it resets the complete HOST system (blackscreen, bios...) If I install a Windows XP on it it works well on "binary translation" mode. If I try installing Linux on it, in "binary translation" mode it crashes 1 or 2 seconds after I hit enter on the GRUB selection screen (after the first page of kernel messages rolled in) Using VirtualBox it crashes right in the BIOS. It gave me a Bluescreen though! 0x00000101: CLOCK_WATCHDOG_TIMEOUT: a clock interrupt was not received on a secondary processor within the allocated time interval NEWS: I tried VirtualBox again and it did not completely crash the computer this time. It gave me a critical error and a log file: http://pastebin.com/yKZSDs91 In conclusion, it will crash instantly if VT-x is activated. If not, it seemingly only crashed if I try to install something with 64 bits. Another update: Yes, it ONLY crashes when the guest is 64 bit! What I tried: Reinstalling Windows (my Windows installation was quite broken so it seemed natural. Didn't work though.) New BIOS What I am certain of: Virtualization extensions are activated in the BIOS What my computer specs are: ASUS P8P67 LE mainboard, newest BIOS/EFI firmware Intel Core i5 2500k Ati Radeon HD 5770 16 GB Corsair 1333mhz DDR3 RAM, 4 X 4 GB

    Read the article

  • Almost All Xenserver Logical Volumes Disappeared - Recovery?

    - by Alex
    We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top. edit2 Output of vgcfgrestore, but from the rescue system, as there is no root to chroot to. # vgcfgrestore --list VG_XenStorage-x-b4b0-x-x-408b91acdcae File: /etc/lvm/archive/VG_XenStorage-x-x-x-x-408b91acdcae_00000.vg VG name: VG_XenStorage-x-x-x-x-408b91acdcae Description: Created *before* executing '/sbin/vgscan --ignorelockingfailure --mknodes' Backup Time: Fri Jun 28 23:53:20 2013 File: /etc/lvm/backup/VG_XenStorage-x-x-x-x-408b91acdcae VG name: VG_XenStorage-x-x-x-x-408b91acdcae Description: Created *after* executing '/sbin/vgscan --ignorelockingfailure --mknodes' Backup Time: Fri Jun 28 23:53:20 2013

    Read the article

  • S3sync not working

    - by user57833
    Hello, I managed to get s3sync to upload my test folder to Amazon S3 and can see it in the MWS Managment Console. Downloading the data back to a test folder results in the following error message: root@mybucketname:/var/s3sync# ./week_download.sh s3Prefix backups/weekly localPrefix /var/s3sync/testdown/weekly s3TreeRecurse mybucketname backups/weekly Creating new connection Trying command list_bucket mybucketname prefix backups/weekly max-keys 200 delimiter / with 100 retries le ft Response code: 200 prefix found: / s3TreeRecurse mybucketname backups/weekly / Trying command list_bucket mybucketname prefix backups/weekly/ max-keys 200 delimiter / with 100 retries l eft Response code: 200 S3 item backups/weekly/ s3 node object init. Name: Path:backups/weekly Size:0 Tag:d41d8cd98f00b204e9800998ecf8427e Date:Fri O ct 29 14:21:53 UTC 2010 local node object init. Name: Path:/var/s3sync/testdown/weekly/ Size: Tag: Date: source: dest: Update node s3sync.rb:638:in initialize': No such file or directory - /var/s3sync/testdown/weekly/.s3syncTemp (E rrno::ENOENT) from s3sync.rb:638:inopen' from s3sync.rb:638:in updateFrom' from s3sync.rb:393:inmain' from s3sync.rb:735 I am using the following download script: !/bin/bash script to download local directory upto s3 cd /var/s3sync/ export AWS_ACCESS_KEY_ID=nothing to see here export AWS_SECRET_ACCESS_KEY=nothing to see here export SSL_CERT_DIR=/var/s3sync/certs ruby s3sync.rb -r -v -d --progress --make-dirs mybucket:backups/weekly /var/s3sync/testdown copy and modify line above for each additional folder to be synced Any idea's? Does the download script need to download to the source of Amazon S3 i.e testup folder? Was hoping on the instance of a complete failure and the original folders won't exist that it would just download everything from me. Note: changed my bucket names to "mybucketname" so that it is not public!

    Read the article

  • Why is my computer randomly restarting? How can I fix it?

    - by kinglime
    I have a custom built desktop computer that I've been using since about a year ago. The main specs are: ASUS P8Z68-V LE Motherboard Intel Core i7 2600k Corsair Vengeance 16GB Ram ASUS ENGTX570 GPU Corsair TX650M PSU I was running an overclock of 4.4ghz for my cpu (I have a Hyper212 EVO) and 1600mhz for my RAM but have it currently turned off due to my issues. I am also currently running Windows 8 but this problem occured in Windows 7 too. Basically my issue is that seemingly randomly, with no pattern my PC will reset itself and ASUS Anti-Surge will alert me that something went wrong. This issue is not related to system stress. I can run it fine for an hour maxxed out on Prime95 then later I can be watching a mere YouTube video when it will randomly reset. This has been occurring probably for the last two weeks and it seems to be getting worse. I believe this might be related to the power supply but when I monitor it in the bios and in Windows it appears to be putting out the proper voltages. Also possibly related or not but my Nvidia drivers frequently temporarily fail and then warn me of some kind of kernel error? If I have to buy a new power supply that is what I'll do but I want to make damn sure that's the only issue at hand. Thank you everyone in advance, please help me diagnose the issue and tell me what I can do to fix it. If you need any additional info about my setup please ask me.

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >