static site - Page 148 - Developer IT

Is there an application to check a site for infections?

- by Chris

A friend of mine says that a site I frequent was reported by his antivirus software to be infected with a trojan. I can't confirm this because I'm on a Mac, and he's running PC so nothing happens on my end. I'm wondering if there's a web site that I could use to check the site for infection or malicious script.

Read the article

Setting up a copy of a site with IIS 7?

- by SJaguar13

I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

Read the article

what's the PC version of "wget -r" to get files off an ftp site in the command line?

- by Bec

someone showed me a really quick way to get folders off an ftp site via the shell on a Mac using the command "wget -r ftp://" (then the address of the ftp site folder location) and it would download to whatever folder i was in, keeping all the sub directories the same as the ftp site seemed really quick and easy, but how do i do a similar thing on a PC?

Read the article

configure domino web server to use internet site document?

- by kasper_341

internet site configurations view has - security options - Accept SSL site certificates: default is NO Accept expired SSL certificates: default is Yes question: how does this effect server behaviour ? e.g. if i change the default behaviour -Accept SSL site certificates to yes then what effect will it have on server ? i hope the questions is clear enough, if not please let me know i will rephrase it. thanks

Read the article

which software/plugin is best and easy to use to dowload any embeded video audio from any site?

- by Jitendra vyas

which software/plug-in is best and easy to use to download any embedded video audio ( like from you tube and similar type of site or from any site where video is on page flv,quicklime etc from any site? like 1-2-3 and done? and with resume facility. Any application can do this or any browser can do this very well? I'm on windows . need any freeware and portable would be better

Read the article

Firefox: how to block cookies by name, not by site?

- by deepc

Firefox allows to block all cookies on a site-by-site level. This is ok for the most part. However, it does not help with blocking only Google Analytics cookies. The GA cookie names start with __ut. Is there a Firefox add-on which can block all __ut* cookies? I know there are many cookie related add-ons for Firefox - but apparently all of them simply fine tune cookie site-by-site blocking, according to their descriptions. Hopefully I missed the one who can do this... I also know about Google's plugin to opt out of analytics. Installing a specific plug-in for that purpose (as opposed to an add-on) seems a bit overdone. Plus, I would have to trust Google with that and that is exactly what I don't.

Read the article

Is there a good [and modern] reason to not have static HTML pages with AJAX content , rather than generate pages?

- by user1725

Assumptions: We don't care about IE6, and Noscript users. Lets pretend we have the following design concept: All your pages are HTML/CSS that create the ascetics, layout, colours, general design related things. Lets pretend this basic code below is that: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <link href="/example.css" rel="stylesheet" type="text/css"/> <script src="example.js" type="text/javascript"></script> <head> <body> <div class="left"> </div> <div class="mid"> </div> <div class="right"> </div> </body> </html> Which in theory should produce, with the right CSS, three vertical columns on the web page. Now, here's the root of the question, what are the serious advantages and/or disadvantages of loading the content of these columns (lets assume they are all indeed dynamic content, not static) via AJAX requests, or have the content pre-set with a scripting language? So for instance, we would have, in the AJAX example, lets asume jquery is used on-load: //Multiple http requests $("body > div.left").load("./script.php?content=news"); $("body > div.right").load("./script.php?content=blogs"); $("body > div.mid").load("./script.php?content=links"); OR--- //Single http request $.ajax({ url: './script.php?content=news|blogs|links', method: 'json', type: 'text', success: function (data) { $("body > div.left").html(data.news); $("body > div.right").html(data.blogs); $("body > div.mid").html(data.links); } }) Verses doing this: <body> <div class="left"> <?php echo function_returning_news(); ?> </div> <div class="mid"> <?php echo function_returning_blogs(); ?> </div> <div class="right"> <?php echo function_returning_links(); ?> </div> </body> I'm personally thinking right now that doing static HTML pages is a better method, my reasoning is: I've separated my data, logic, and presentation (ie, "MVC") code. I can make changes to one without others. Browser caches mean I'm just getting server load mostly for the content, not the presentation wrapped around it. I could turn my "script.php" into a more robust API for the website. But I'm not certain or clear that these are legitimately good reasons, and I'm not confidently aware of other issues that could happen, so I would like to know the pros-and-cons, so to speak.

Read the article

How to access static members in a Velocity template?

- by matt b

I'm not sure if there is a way to do this in Velocity or not: I have a User POJO which a property named Status, which looks like an enum (but it is not, since I am stuck on Java 1.4), the definition looks something like this: public class User { // default status to User private Status status = Status.USER; public void setStatus(Status status) { this.status = status; } public Status getStatus() { return status; } And Status is a static inner class: public static final class Status { private String statusString; private Status(String statusString) { this.statusString = statusString; } public final static Status USER = new Status("user"); public final static Status ADMIN = new Status("admin"); public final static Status STATUS_X = new Status("blah"); //.equals() and .hashCode() implemented as well } With this pattern, a user status can easily be tested in a conditional such as if(User.Status.ADMIN.equals(user.getStatus())) ... ... without having to reference any constants for the status ID, any magic numbers, etc. However, I can't figure out how to test these conditionals in my Velocity template with VTL. I'd like to just print a simple string based upon the user's status, such as: Welcome <b>${user.name}</b>! <br/> <br/> #if($user.status == com.company.blah.User.Status.USER) You are a regular user #elseif($user.status == com.company.blah.User.Status.ADMIN) You are an administrator #etc... #end But this throws an Exception that looks like org.apache.velocity.exception.ParseErrorException: Encountered "User" at webpages/include/dashboard.inc[line 10, column 21] Was expecting one of: "[" ... From the VTL User Guide, there is no mention of accessing a Java class/static member directly in VTL, it appears that the right hand side (RHS) of a conditional can only be a number literal, string literal, property reference, or method reference. So is there any way that I can access static Java properties/references in a Velocity template? I'm aware that as a workaround, I could embed the status ID or some other identifier as a reference in my controller (this is a web MVC application using Velocity as the View technology), but I strongly do not want to embed any magic numbers or constants in the view layer.

Read the article

Am I allowed to display a small image on top of a Google Maps Static Api map?

- by Fábio Santos

I am the webmaster to my company's website. I was asked to make the Google Map on this page smaller, but the interactive map doesn't work well at all at 300x200. I was asked to place a screenshot there but since that seems to be a violation of Google's terms I decided to use the Static Maps API. As you can see, on the page, I have a custom pointer icon. I don't want to lose it, so I intend to use HTML and CSS to place the pointer over the map, thus replacing the original pointer on the client side. Am I allowed to do that?

Read the article

Assemble static site from templates? (don't want to reinvent the wheel)

- by raindog308

I have a site that is 100% static content (no php, just some javascript). There's several "blocks" like the header, menu, footer, etc. that are the same on each page. Rather than do a lot of copy/pasting, I was thinking of some kind of template system where I could run a CLI command (in php, perl, python, shell, whatever) and have it replace all the block tags with the actual block text. I did see some answers in this question, but those seem oriented towards "we provide the style and layout, you provide the text". In my case, I have everything as far as layout, css, etc. - just want to do a glorified sed. Before I invent the wheel, I was wondering if there was a tool out there already.

Read the article

How to create a Request Specific Thread Safe Static int Counter?

- by user960567

In one of my server application I have a class that look like, class A { static int _value = 0; void DoSomething() { // a request start here _value = 0; _value++; // a request end here } // This method can be called many time during request void SomeAsyncMethods() { _value++; } } The problem is SomeAsyncMethods is async. Can be called many times. What I need when a request start set _value = 0 and then asynchrosnously increment this. After end of request I need the total. But the problem is that another request at the same time can access the class.

Read the article

Script to connect to hidden wireless network with static IP?

- by nLinked

Would like a script, when run, it should connect to a hidden wireless network with these details: SSID is "Wireless" Network is not broadcasting its SSID above (is hidden) WPA2-PSK, AES, password is "password" Static IP: 192.168.1.1 Def. gateway: 192.168.1.254 DNS: 192.168.1.254 No idea how to do this. But I do know the wireless interface is called wlan0 and I'm on Ubuntu 10.10. I don't want to use the built in Network Manager as it never auto-connects on startup. WICD doesn't work either. Any ideas most welcome.

Read the article

how to use a class method as a WIN32 application callback method (WINPROC)... Error static struct HI

- by numerical25

I am receiving errors and at the same time trying to make this work so please read what I got to say. Thanks.... I am creating a c++ application and majority of the application is encapsulated into a class. That means that my WinProc function is a static class method that I use as my call back method for my win32 application. The problem is that since I created that as a win32 application, every class member I use inside that method has to be static as well. Including my HINSTANCE class which I use inside of it. Now I receive this error error LNK2001: unresolved external symbol "public: static struct HINSTANCE__ I need to figure out how to make this all work and below is my class declaration. My static member static HINSTANCE m_hInst is causing the error I believe. #pragma once #include "stdafx.h" #include "resource.h" #define MAX_LOADSTRING 100 class RenderEngine { protected: int m_width; int m_height; ATOM RegisterEngineClass(); public: static HINSTANCE m_hInst; //<------ This is causing the error HWND m_hWnd; int m_nCmdShow; TCHAR m_szTitle[MAX_LOADSTRING]; // The title bar text TCHAR m_szWindowClass[MAX_LOADSTRING]; // the main window class name bool InitWindow(); bool InitDirectX(); bool InitInstance(); //static functions static LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam); static INT_PTR CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam); int Run(); }; Below is the implementation #include "stdafx.h" #include "RenderEngine.h" bool RenderEngine::InitWindow() { RenderEngine::m_hInst = NULL; // Initialize global strings LoadString(m_hInst, IDS_APP_TITLE, m_szTitle, MAX_LOADSTRING); LoadString(m_hInst, IDC_RENDERENGINE, m_szWindowClass, MAX_LOADSTRING); if(!RegisterEngineClass()) { return false; } if(!InitInstance()) { return false; } return true; } ATOM RenderEngine::RegisterEngineClass() { WNDCLASSEX wcex; wcex.cbSize = sizeof(WNDCLASSEX); wcex.style = CS_HREDRAW | CS_VREDRAW; wcex.lpfnWndProc = RenderEngine::WndProc; wcex.cbClsExtra = 0; wcex.cbWndExtra = 0; wcex.hInstance = m_hInst; wcex.hIcon = LoadIcon(m_hInst, MAKEINTRESOURCE(IDI_RENDERENGINE)); wcex.hCursor = LoadCursor(NULL, IDC_ARROW); wcex.hbrBackground = (HBRUSH)(COLOR_WINDOW+1); wcex.lpszMenuName = MAKEINTRESOURCE(IDC_RENDERENGINE); wcex.lpszClassName = m_szWindowClass; wcex.hIconSm = LoadIcon(wcex.hInstance, MAKEINTRESOURCE(IDI_SMALL)); return RegisterClassEx(&wcex); } LRESULT CALLBACK RenderEngine::WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam) { int wmId, wmEvent; PAINTSTRUCT ps; HDC hdc; switch (message) { case WM_COMMAND: wmId = LOWORD(wParam); wmEvent = HIWORD(wParam); // Parse the menu selections: switch (wmId) { case IDM_ABOUT: DialogBox(m_hInst, MAKEINTRESOURCE(IDD_ABOUTBOX), hWnd, About); break; case IDM_EXIT: DestroyWindow(hWnd); break; default: return DefWindowProc(hWnd, message, wParam, lParam); } break; case WM_PAINT: hdc = BeginPaint(hWnd, &ps); // TODO: Add any drawing code here... EndPaint(hWnd, &ps); break; case WM_DESTROY: PostQuitMessage(0); break; default: return DefWindowProc(hWnd, message, wParam, lParam); } return 0; } bool RenderEngine::InitInstance() { m_hWnd = NULL; m_hWnd = CreateWindow(m_szWindowClass, m_szTitle, WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, 0, CW_USEDEFAULT, 0, NULL, NULL, m_hInst, NULL); if (!m_hWnd) { return FALSE; } if(!ShowWindow(m_hWnd, m_nCmdShow)) { return false; } UpdateWindow(m_hWnd); return true; } // Message handler for about box. INT_PTR CALLBACK RenderEngine::About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam) { UNREFERENCED_PARAMETER(lParam); switch (message) { case WM_INITDIALOG: return (INT_PTR)TRUE; case WM_COMMAND: if (LOWORD(wParam) == IDOK || LOWORD(wParam) == IDCANCEL) { EndDialog(hDlg, LOWORD(wParam)); return (INT_PTR)TRUE; } break; } return (INT_PTR)FALSE; } int RenderEngine::Run() { MSG msg; HACCEL hAccelTable; hAccelTable = LoadAccelerators(m_hInst, MAKEINTRESOURCE(IDC_RENDERENGINE)); // Main message loop: while (GetMessage(&msg, NULL, 0, 0)) { if (!TranslateAccelerator(msg.hwnd, hAccelTable, &msg)) { TranslateMessage(&msg); DispatchMessage(&msg); } } return (int) msg.wParam; } and below is the code being used within the WinMain RenderEngine go; int APIENTRY _tWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { UNREFERENCED_PARAMETER(hPrevInstance); UNREFERENCED_PARAMETER(lpCmdLine); // TODO: Place code here. RenderEngine::m_hInst = hInstance; go.m_nCmdShow = nCmdShow; if(!go.InitWindow()) { return 0; } go.Run(); return 0; } If anything does not make any sense, then I apologize, I am a newb. Thanks for the help!!

Read the article

How to create persistent static route on Mac OS X 10.6?

- by kopobamypa

I need to add static route on MAC OS. I found good description here Permanent Static Route Mac Os X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

Read the article

How to create persistent static route on Mac OS X 10.6?

- by kopobamypa

I need to add static route on Mac OS. I found good description here Permanent Static Route Mac OS X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

Read the article

Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

- by SeanMcAlinden

I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started… Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Class for creating an assembly builder. /// </summary> internal static class DynamicAssemblyBuilder { #region Create /// <summary> /// Creates an assembly builder. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> public static AssemblyBuilder Create(string assemblyName) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.Run); DynamicAssemblyCache.Add(assembly); return assembly; } /// <summary> /// Creates an assembly builder and saves the assembly to the passed in location. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> /// <param name="filePath">The file path.</param> public static AssemblyBuilder Create(string assemblyName, string filePath) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.RunAndSave, filePath); DynamicAssemblyCache.Add(assembly); return assembly; } #endregion } } So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache. DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Cache for storing the dynamic assembly builder. /// </summary> internal static class DynamicAssemblyCache { #region Declarations private static object syncRoot = new object(); internal static AssemblyBuilder Cache = null; #endregion #region Adds a dynamic assembly to the cache. /// <summary> /// Adds a dynamic assembly builder to the cache. /// </summary> /// <param name="assemblyBuilder">The assembly builder.</param> public static void Add(AssemblyBuilder assemblyBuilder) { lock (syncRoot) { Cache = assemblyBuilder; } } #endregion #region Gets the cached assembly /// <summary> /// Gets the cached assembly builder. /// </summary> /// <returns></returns> public static AssemblyBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache); } } #endregion } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache. The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for creating a module builder. /// </summary> internal static class DynamicModuleBuilder { /// <summary> /// Creates a module builder using the cached assembly. /// </summary> public static ModuleBuilder Create() { string assemblyName = DynamicAssemblyCache.Get.GetName().Name; ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule (assemblyName, string.Format("{0}.dll", assemblyName)); DynamicModuleCache.Add(moduleBuilder); return moduleBuilder; } } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for storing the module builder. /// </summary> internal static class DynamicModuleCache { #region Declarations private static object syncRoot = new object(); internal static ModuleBuilder Cache = null; #endregion #region Add /// <summary> /// Adds a dynamic module builder to the cache. /// </summary> /// <param name="moduleBuilder">The module builder.</param> public static void Add(ModuleBuilder moduleBuilder) { lock (syncRoot) { Cache = moduleBuilder; } } #endregion #region Get /// <summary> /// Gets the cached module builder. /// </summary> /// <returns></returns> public static ModuleBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache); } } #endregion } } The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods. The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types { /// <summary> /// Cache for storing proxy types. /// </summary> internal static class DynamicTypeCache { #region Declarations static object syncRoot = new object(); public static Dictionary<string, Type> Cache = new Dictionary<string, Type>(); #endregion /// <summary> /// Adds a proxy to the type cache. /// </summary> /// <param name="type">The type.</param> /// <param name="proxy">The proxy.</param> public static void AddProxyForType(Type type, Type proxy) { lock (syncRoot) { Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy); } } /// <summary> /// Tries the type of the get proxy for. /// </summary> /// <param name="type">The type.</param> /// <returns></returns> public static Type TryGetProxyForType(Type type) { lock (syncRoot) { Type proxyType; Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType); return proxyType; } } #region Private Methods private static string GetHashCode(string fullName) { SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider(); Byte[] buffer = Encoding.UTF8.GetBytes(fullName); Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length); return Convert.ToBase64String(hash); } #endregion } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions) Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

Read the article

Oracle Coherence, Split-Brain and Recovery Protocols In Detail

- by Ricardo Ferreira

This article provides a high level conceptual overview of Split-Brain scenarios in distributed systems. It will focus on a specific example of cluster communication failure and recovery in Oracle Coherence. This includes a discussion on the witness protocol (used to remove failed cluster members) and the panic protocol (used to resolve Split-Brain scenarios). Note that the removal of cluster members does not necessarily indicate a Split-Brain condition. Oracle Coherence does not (and cannot) detect a Split-Brain as it occurs, the condition is only detected when cluster members that previously lost contact with each other regain contact. Cluster Topology and Configuration In order to create an good didactic for the article, let's assume a cluster topology and configuration. In this example we have a six member cluster, consisting of one JVM on each physical machine. The member IDs are as follows: Member ID IP Address 1 10.149.155.76 2 10.149.155.77 3 10.149.155.236 4 10.149.155.75 5 10.149.155.79 6 10.149.155.78 Members 1, 2, and 3 are connected to a switch, and members 4, 5, and 6 are connected to a second switch. There is a link between the two switches, which provides network connectivity between all of the machines. Member 1 is the first member to join this cluster, thus making it the senior member. Member 6 is the last member to join this cluster. Here is a log snippet from Member 6 showing the complete member set: 2010-02-26 15:27:57.390/3.062 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=6): Started DefaultCacheServer... SafeCluster: Name=cluster:0xDDEB Group{Address=224.3.5.3, Port=35465, TTL=4} MasterMemberSet ( ThisMember=Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=6, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) At approximately 15:30, the connection between the two switches is severed: Thirty seconds later (the default packet timeout in development mode) the logs indicate communication failures across the cluster. In this example, the communication failure was caused by a network failure. In a production setting, this type of communication failure can have many root causes, including (but not limited to) network failures, excessive GC, high CPU utilization, swapping/virtual memory, and exceeding maximum network bandwidth. In addition, this type of failure is not necessarily indicative of a split brain. Any communication failure will be logged in this fashion. Member 2 logs a communication failure with Member 5: 2010-02-26 15:30:32.638/196.928 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) ) The Coherence clustering protocol (TCMP) is a reliable transport mechanism built on UDP. In order for the protocol to be reliable, it requires an acknowledgement (ACK) for each packet delivered. If a packet fails to be acknowledged within the configured timeout period, the Coherence cluster member will log a packet timeout (as seen in the log message above). When this occurs, the cluster member will consult with other members to determine who is at fault for the communication failure. If the witness members agree that the suspect member is at fault, the suspect is removed from the cluster. If the witnesses unanimously disagree, the accuser is removed. This process is known as the witness protocol. Since Member 2 cannot communicate with Member 5, it selects two witnesses (Members 1 and 4) to determine if the communication issue is with Member 5 or with itself (Member 2). However, Member 4 is on the switch that is no longer accessible by Members 1, 2 and 3; thus a packet timeout for member 4 is recorded as well: 2010-02-26 15:30:35.648/199.938 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) Member 1 has the ability to confirm the departure of member 4, however Member 6 cannot as it is also inaccessible. At the same time, Member 3 sends a request to remove Member 6, which is followed by a report from Member 3 indicating that Member 6 has departed the cluster: 2010-02-26 15:30:35.706/199.996 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft request for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) 2010-02-26 15:30:35.709/199.999 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft notification for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) The log for Member 3 determines how Member 6 departed the cluster: 2010-02-26 15:30:35.161/191.694 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=3): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ) 2010-02-26 15:30:35.165/191.698 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=3): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ); removing Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) In this case, Member 3 happened to select two witnesses that it still had connectivity with (Members 1 and 2) thus resulting in a simple decision to remove Member 6. Given the departure of Member 6, Member 2 is left with a single witness to confirm the departure of Member 4: 2010-02-26 15:30:35.713/200.003 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=2): Member departure confirmed by MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ); removing Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) In the meantime, Member 4 logs a missing heartbeat from the senior member. This message is also logged on Members 5 and 6. 2010-02-26 15:30:07.906/150.453 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=PacketListenerN, member=4): Scheduled senior member heartbeat is overdue; rejoining multicast group. Next, Member 4 logs a TcpRing failure with Member 2, thus resulting in the termination of Member 2: 2010-02-26 15:30:21.421/163.968 Oracle Coherence GE 3.5.3/465p2 <D4> (thread=Cluster, member=4): TcpRing: Number of socket exceptions exceeded maximum; last was "java.net.SocketTimeoutException: connect timed out"; removing the member: 2 For quick process termination detection, Oracle Coherence utilizes a feature called TcpRing which is a sparse collection of TCP/IP-based connections between different members in the cluster. Each member in the cluster is connected to at least one other member, which (if at all possible) is running on a different physical box. This connection is not used for any data transfer, only heartbeat communications are sent once a second per each link. If a certain number of exceptions are thrown while trying to re-establish a connection, the member throwing the exceptions is removed from the cluster. Member 5 logs a packet timeout with Member 3 and cites witnesses Members 4 and 6: 2010-02-26 15:30:29.791/165.037 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=5): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) 2010-02-26 15:30:29.798/165.044 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=5): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ); removing Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Eventually we are left with two distinct clusters consisting of Members 1, 2, 3 and Members 4, 5, 6, respectively. In the latter cluster, Member 4 is promoted to senior member. The connection between the two switches is restored at 15:33. Upon the restoration of the connection, the cluster members immediately receive cluster heartbeats from the two senior members. In the case of Members 1, 2, and 3, the following is logged: 2010-02-26 15:33:14.970/369.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): The member formerly known as Member(Id=4, Timestamp=2010-02-26 15:30:35.341, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. Likewise for Members 4, 5, and 6: 2010-02-26 15:33:14.343/336.890 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=4): The member formerly known as Member(Id=1, Timestamp=2010-02-26 15:30:31.64, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. This message indicates that a senior heartbeat is being received from members that were previously removed from the cluster, in other words, something that should not be possible. For this reason, the recipients of these messages will initially ignore them. After several iterations of these messages, the existence of multiple clusters is acknowledged, thus triggering the panic protocol to reconcile this situation. When the presence of more than one cluster (i.e. Split-Brain) is detected by a Coherence member, the panic protocol is invoked in order to resolve the conflicting clusters and consolidate into a single cluster. The protocol consists of the removal of smaller clusters until there is one cluster remaining. In the case of equal size clusters, the one with the older Senior Member will survive. Member 1, being the oldest member, initiates the protocol: 2010-02-26 15:33:45.970/400.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): An existence of a cluster island with senior Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) containing 3 nodes have been detected. Since this Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) is the senior of an older cluster island, the panic protocol is being activated to stop the other island's senior and all junior nodes that belong to it. Member 3 receives the panic: 2010-02-26 15:33:45.803/382.336 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=3): Received panic from senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) caused by Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member 4, the senior member of the younger cluster, receives the kill message from Member 3: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. In turn, Member 4 requests the departure of its junior members 5 and 6: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:43.343/349.015 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=6): Received a Kill message from a valid Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer); stopping cluster service. Once Members 4, 5, and 6 restart, they rejoin the original cluster with senior member 1. The log below is from Member 4. Note that it receives a different member id when it rejoins the cluster. 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:46.921/369.468 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Service Cluster left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:InvocationService, member=4): Service InvocationService left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=OptimisticCache, member=4): Service OptimisticCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=ReplicatedCache, member=4): Service ReplicatedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=DistributedCache, member=4): Service DistributedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:Management, member=4): Service Management left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service Management with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service DistributedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service ReplicatedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service OptimisticCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service InvocationService with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member(Id=6, Timestamp=2010-02-26 15:33:47.046, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) left Cluster with senior member 4 2010-02-26 15:33:49.218/371.765 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=n/a): Restarting cluster 2010-02-26 15:33:49.421/371.968 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a 2010-02-26 15:33:49.625/372.172 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2010-02-26 15:33:50.499, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xDDEB" with senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) Cool isn't it?

Read the article

ASP.NET MVC 3: Layouts and Sections with Razor

- by ScottGu

This is another in a series of posts I’m doing that cover some of the new ASP.NET MVC 3 features: Introducing Razor (July 2nd) New @model keyword in Razor (Oct 19th) Layouts with Razor (Oct 22nd) Server-Side Comments with Razor (Nov 12th) Razor’s @: and <text> syntax (Dec 15th) Implicit and Explicit code nuggets with Razor (Dec 16th) Layouts and Sections with Razor (Today) In today’s post I’m going to go into more details about how Layout pages work with Razor. In particular, I’m going to cover how you can have multiple, non-contiguous, replaceable “sections” within a layout file – and enable views based on layouts to optionally “fill in” these different sections at runtime. The Razor syntax for doing this is clean and concise. I’ll also show how you can dynamically check at runtime whether a particular layout section has been defined, and how you can provide alternate content (or even an alternate layout) in the event that a section isn’t specified within a view template. This provides a powerful and easy way to customize the UI of your site and make it clean and DRY from an implementation perspective. What are Layouts? You typically want to maintain a consistent look and feel across all of the pages within your web-site/application. ASP.NET 2.0 introduced the concept of “master pages” which helps enable this when using .aspx based pages or templates. Razor also supports this concept with a feature called “layouts” – which allow you to define a common site template, and then inherit its look and feel across all the views/pages on your site. I previously discussed the basics of how layout files work with Razor in my ASP.NET MVC 3: Layouts with Razor blog post. Today’s post will go deeper and discuss how you can define multiple, non-contiguous, replaceable regions within a layout file that you can then optionally “fill in” at runtime. Site Layout Scenario Let’s look at how we can implement a common site layout scenario with ASP.NET MVC 3 and Razor. Specifically, we’ll implement some site UI where we have a common header and footer on all of our pages. We’ll also add a “sidebar” section to the right of our common site layout. On some pages we’ll customize the SideBar to contain content specific to the page it is included on: And on other pages (that do not have custom sidebar content) we will fall back and provide some “default content” to the sidebar: We’ll use ASP.NET MVC 3 and Razor to enable this customization in a nice, clean way. Below are some step-by-step tutorial instructions on how to build the above site with ASP.NET MVC 3 and Razor. Part 1: Create a New Project with a Layout for the “Body” section We’ll begin by using the “File->New Project” menu command within Visual Studio to create a new ASP.NET MVC 3 Project. We’ll create the new project using the “Empty” template option: This will create a new project that has no default controllers in it: Creating a HomeController We will then right-click on the “Controllers” folder of our newly created project and choose the “Add->Controller” context menu command. This will bring up the “Add Controller” dialog: We’ll name the new controller we create “HomeController”. When we click the “Add” button Visual Studio will add a HomeController class to our project with a default “Index” action method that returns a view: We won’t need to write any Controller logic to implement this sample – so we’ll leave the default code as-is. Creating a View Template Our next step will be to implement the view template associated with the HomeController’s Index action method. To implement the view template, we will right-click within the “HomeController.Index()” method and select the “Add View” command to create a view template for our home page: This will bring up the “Add View” dialog within Visual Studio. We do not need to change any of the default settings within the above dialog (the name of the template was auto-populated to Index because we invoked the “Add View” context menu command within the Index method). When we click the “Add” Button within the dialog, a Razor-based “Index.cshtml” view template will be added to the \Views\Home\ folder within our project. Let’s add some simple default static content to it: Notice above how we don’t have an <html> or <body> section defined within our view template. This is because we are going to rely on a layout template to supply these elements and use it to define the common site layout and structure for our site (ensuring that it is consistent across all pages and URLs within the site). Customizing our Layout File Let’s open and customize the default “_Layout.cshtml” file that was automatically added to the \Views\Shared folder when we created our new project: The default layout file (shown above) is pretty basic and simply outputs a title (if specified in either the Controller or the View template) and adds links to a stylesheet and jQuery. The call to “RenderBody()” indicates where the main body content of our Index.cshtml file will merged into the output sent back to the browser. Let’s modify the Layout template to add a common header, footer and sidebar to the site: We’ll then edit the “Site.css” file within the \Content folder of our project and add 4 CSS rules to it: And now when we run the project and browse to the home “/” URL of our project we’ll see a page like below: Notice how the content of the HomeController’s Index view template and the site’s Shared Layout template have been merged together into a single HTML response. Below is what the HTML sent back from the server looks like: Part 2: Adding a “SideBar” Section Our site so far has a layout template that has only one “section” in it – what we call the main “body” section of the response. Razor also supports the ability to add additional "named sections” to layout templates as well. These sections can be defined anywhere in the layout file (including within the <head> section of the HTML), and allow you to output dynamic content to multiple, non-contiguous, regions of the final response. Defining the “SideBar” section in our Layout Let’s update our Layout template to define an additional “SideBar” section of content that will be rendered within the <div id=”sidebar”> region of our HTML. We can do this by calling the RenderSection(string sectionName, bool required) helper method within our Layout.cshtml file like below: The first parameter to the “RenderSection()” helper method specifies the name of the section we want to render at that location in the layout template. The second parameter is optional, and allows us to define whether the section we are rendering is required or not. If a section is “required”, then Razor will throw an error at runtime if that section is not implemented within a view template that is based on the layout file (which can make it easier to track down content errors). If a section is not required, then its presence within a view template is optional, and the above RenderSection() code will render nothing at runtime if it isn’t defined. Now that we’ve made the above change to our layout file, let’s hit refresh in our browser and see what our Home page now looks like: Notice how we currently have no content within our SideBar <div> – that is because the Index.cshtml view template doesn’t implement our new “SideBar” section yet. Implementing the “SideBar” Section in our View Template Let’s change our home-page so that it has a SideBar section that outputs some custom content. We can do that by opening up the Index.cshtml view template, and by adding a new “SiderBar” section to it. We’ll do this using Razor’s @section SectionName { } syntax: We could have put our SideBar @section declaration anywhere within the view template. I think it looks cleaner when defined at the top or bottom of the file – but that is simply personal preference. You can include any content or code you want within @section declarations. Notice above how I have a C# code nugget that outputs the current time at the bottom of the SideBar section. I could have also written code that used ASP.NET MVC’s HTML/AJAX helper methods and/or accessed any strongly-typed model objects passed to the Index.cshtml view template. Now that we’ve made the above template changes, when we hit refresh in our browser again we’ll see that our SideBar content – that is specific to the Home Page of our site – is now included in the page response sent back from the server: The SideBar section content has been merged into the proper location of the HTML response : Part 3: Conditionally Detecting if a Layout Section Has Been Implemented Razor provides the ability for you to conditionally check (from within a layout file) whether a section has been defined within a view template, and enables you to output an alternative response in the event that the section has not been defined. This provides a convenient way to specify default UI for optional layout sections. Let’s modify our Layout file to take advantage of this capability. Below we are conditionally checking whether the “SideBar” section has been defined without the view template being rendered (using the IsSectionDefined() method), and if so we render the section. If the section has not been defined, then we now instead render some default content for the SideBar: Note: You want to make sure you prefix calls to the RenderSection() helper method with a @ character – which will tell Razor to execute the HelperResult it returns and merge in the section content in the appropriate place of the output. Notice how we wrote @RenderSection(“SideBar”) above instead of just RenderSection(“SideBar”). Otherwise you’ll get an error. Above we are simply rendering an inline static string (<p>Default SideBar Content</p>) if the section is not defined. A real-world site would more likely refactor this default content to be stored within a separate partial template (which we’d render using the Html.RenderPartial() helper method within the else block) or alternatively use the Html.Action() helper method within the else block to encapsulate both the logic and rendering of the default sidebar. When we hit refresh on our home-page, we will still see the same custom SideBar content we had before. This is because we implemented the SideBar section within our Index.cshtml view template (and so our Layout rendered it): Let’s now implement a “/Home/About” URL for our site by adding a new “About” action method to our HomeController: The About() action method above simply renders a view back to the client when invoked. We can implement the corresponding view template for this action by right-clicking within the “About()” method and using the “Add View” menu command (like before) to create a new About.cshtml view template. We’ll implement the About.cshtml view template like below. Notice that we are not defining a “SideBar” section within it: When we browse the /Home/About URL we’ll see the content we supplied above in the main body section of our response, and the default SideBar content will rendered: The layout file determined at runtime that a custom SideBar section wasn’t present in the About.cshtml view template, and instead rendered the default sidebar content. One Last Tweak… Let’s suppose that at a later point we decide that instead of rendering default side-bar content, we just want to hide the side-bar entirely from pages that don’t have any custom sidebar content defined. We could implement this change simply by making a small modification to our layout so that the sidebar content (and its surrounding HTML chrome) is only rendered if the SideBar section is defined. The code to do this is below: Razor is flexible enough so that we can make changes like this and not have to modify any of our view templates (nor make change any Controller logic changes) to accommodate this. We can instead make just this one modification to our Layout file and the rest happens cleanly. This type of flexibility makes Razor incredibly powerful and productive. Summary Razor’s layout capability enables you to define a common site template, and then inherit its look and feel across all the views/pages on your site. Razor enables you to define multiple, non-contiguous, “sections” within layout templates that can be “filled-in” by view templates. The @section {} syntax for doing this is clean and concise. Razor also supports the ability to dynamically check at runtime whether a particular section has been defined, and to provide alternate content (or even an alternate layout) in the event that it isn’t specified. This provides a powerful and easy way to customize the UI of your site - and make it clean and DRY from an implementation perspective. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Rename Applications and Virtual Directories in IIS7

- by AngelEyes

from http://lanitdev.wordpress.com/2010/09/02/rename-applications-and-virtual-directories-in-iis7/ Rename Applications and Virtual Directories in IIS7 September 2, 2010 — Brian Grinstead Have you ever wondered why the box to change the name or “Alias” on an application or virtual directory is greyed out (see screenshot below)? I found a way to change the name without recreating all your settings. It uses the built in administration commands in IIS7, called appcmd. Renaming Applications In IIS7 Open a command prompt to see all of your applications. 1 C:> %systemroot%\system32\inetsrv\appcmd list app 2 3 APP "Default Web Site/OldApplicationName" 4 APP "Default Web Site/AnotherApplication" Run a command like this to change your “OldApplicationName” path to “NewApplicationName”. Now you can use http://localhost/newapplicationname 1 C:> %systemroot%\system32\inetsrv\appcmd set app "Default Web Site/OldApplicationName" -path:/NewApplicationName 2 3 APP object "Default Web Site/OldApplicationName" changed Renaming Virtual Directories In IIS7 Open a command prompt to see all of your virtual directories. 1 C:> %systemroot%\system32\inetsrv\appcmd list appcmd 2 3 VDIR "Default Web Site/OldApplicationName/Images" (physicalPath:\\server\images) 4 VDIR "Default Web Site/OldApplicationName/Data/Config" (physicalPath:\\server\config) We want to rename /Images to /Images2 and /Data/Config to /Data/Config2. Here are the example commands: 1 C:> %systemroot%\system32\inetsrv\appcmd set vdir "Default Web Site/OldApplicationName/Images" -path:/Images2 2 3 VDIR object "Default Web Site/OldApplicationName/Images" changed 4 5 C:> %systemroot%\system32\inetsrv\appcmd set vdir "Default Web Site/OldApplicationName/Data/Config" -path:/Data/Config2 6 7 VDIR object "Default Web Site/OldApplicationName/Data/Config" changed

Read the article

Can´t verify my site on Google (error 403 Forbidden). I have other sites in the same host with no problems whatsoever

- by Rosamunda Rosamunda

I can´t verify my site on Google. I´ve done this several times for several sites, all inside the same host. I´ve tried the HTML tag method, HTML upload, Domain Name provider (I canp´t find the options that Google tell me that I should activate...), and Google Analytics. I always get this response: Verification failed for http://www.mysite.com/ using the Google Analytics method (1 minute ago). Your verification file returns a status of 403 (Forbidden) instead of 200 (OK). I´ve checked the server headers, and I get this result: REQUESTING: http://www.mysite.com GET / HTTP/1.1 Connection: Keep-Alive Keep-Alive: 300 Accept:/ Host: www.mysite.com Accept-Language: en-us Accept-Encoding: gzip, deflate User-Agent: Mozilla/4.0 (compatible; MSIE 7.0b; Windows NT 6.0) SERVER RESPONSE: HTTP/1.1 403 Forbidden Date: Wed, 19 Sep 2012 03:25:22 GMT Server: Apache/2.2.19 (Unix) mod_ssl/2.2.19 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 PHP/5.2.17 Connection: close Content-Type: text/html; charset=iso-8859-1 Final Destination Page (It shows my actual homepage). What can I do? The hosting is the very same as in my other sites, where I didn´t have any issue at all! Thanks for your help! Note: As I have a Drupal 7 site, I´ve tried a "Drupal solution" first, but haven´t found any that solved this issue... How can it be forbidden when I can access the link perfectly ok? Is there any solution to this? Thanks!

Read the article

Converting 2D Physics to 3D.

- by static void main

I'm new to game physics and I am trying to adapt a simple 2D ball simulation for a 3D simulation with the Java3D library. I have this problem: Two things: 1) I noted down the values generated by the engine: X/Y are too high and minX/minY/maxY/maxX values are causing trouble. Sometimes the balls are drawing but not moving Sometimes they are going out of the panel Sometimes they're moving on little area Sometimes they just stick at one place... 2) I'm unable to select/define/set the default correct/suitable values considering the 3D graphics scaling/resolution while they are set with respect to 2D screen coordinates, that is my only problem. Please help. This is the code: public class Ball extends GameObject { private float x, y; // Ball's center (x, y) private float speedX, speedY; // Ball's speed per step in x and y private float radius; // Ball's radius // Collision detected by collision detection and response algorithm? boolean collisionDetected = false; // If collision detected, the next state of the ball. // Otherwise, meaningless. private float nextX, nextY; private float nextSpeedX, nextSpeedY; private static final float BOX_WIDTH = 640; private static final float BOX_HEIGHT = 480; /** * Constructor The velocity is specified in polar coordinates of speed and * moveAngle (for user friendliness), in Graphics coordinates with an * inverted y-axis. */ public Ball(String name1,float x, float y, float radius, float speed, float angleInDegree, Color color) { this.x = x; this.y = y; // Convert velocity from polar to rectangular x and y. this.speedX = speed * (float) Math.cos(Math.toRadians(angleInDegree)); this.speedY = speed * (float) Math.sin(Math.toRadians(angleInDegree)); this.radius = radius; } public void move() { if (collisionDetected) { // Collision detected, use the values computed. x = nextX; y = nextY; speedX = nextSpeedX; speedY = nextSpeedY; } else { // No collision, move one step and no change in speed. x += speedX; y += speedY; } collisionDetected = false; // Clear the flag for the next step } public void collideWith() { // Get the ball's bounds, offset by the radius of the ball float minX = 0.0f + radius; float minY = 0.0f + radius; float maxX = 0.0f + BOX_WIDTH - 1.0f - radius; float maxY = 0.0f + BOX_HEIGHT - 1.0f - radius; double gravAmount = 0.9811111f; double gravDir = (90 / 57.2960285258); // Try moving one full step nextX = x + speedX; nextY = y + speedY; System.out.println("In serializedBall in collision."); // If collision detected. Reflect on the x or/and y axis // and place the ball at the point of impact. if (speedX != 0) { if (nextX > maxX) { // Check maximum-X bound collisionDetected = true; nextSpeedX = -speedX; // Reflect nextSpeedY = speedY; // Same nextX = maxX; nextY = (maxX - x) * speedY / speedX + y; // speedX non-zero } else if (nextX < minX) { // Check minimum-X bound collisionDetected = true; nextSpeedX = -speedX; // Reflect nextSpeedY = speedY; // Same nextX = minX; nextY = (minX - x) * speedY / speedX + y; // speedX non-zero } } // In case the ball runs over both the borders. if (speedY != 0) { if (nextY > maxY) { // Check maximum-Y bound collisionDetected = true; nextSpeedX = speedX; // Same nextSpeedY = -speedY; // Reflect nextY = maxY; nextX = (maxY - y) * speedX / speedY + x; // speedY non-zero } else if (nextY < minY) { // Check minimum-Y bound collisionDetected = true; nextSpeedX = speedX; // Same nextSpeedY = -speedY; // Reflect nextY = minY; nextX = (minY - y) * speedX / speedY + x; // speedY non-zero } } speedX += Math.cos(gravDir) * gravAmount; speedY += Math.sin(gravDir) * gravAmount; } public float getSpeed() { return (float) Math.sqrt(speedX * speedX + speedY * speedY); } public float getMoveAngle() { return (float) Math.toDegrees(Math.atan2(speedY, speedX)); } public float getRadius() { return radius; } public float getX() { return x; } public float getY() { return y; } public void setX(float f) { x = f; } public void setY(float f) { y = f; } } Here's how I'm drawing the balls: public class 3DMovingBodies extends Applet implements Runnable { private static final int BOX_WIDTH = 800; private static final int BOX_HEIGHT = 600; private int currentNumBalls = 1; // number currently active private volatile boolean playing; private long mFrameDelay; private JFrame frame; private int currentFrameRate; private Ball[] ball = new Ball[currentNumBalls]; private Random rand; private Sphere[] sphere = new Sphere[currentNumBalls]; private Transform3D[] trans = new Transform3D[currentNumBalls]; private TransformGroup[] objTrans = new TransformGroup[currentNumBalls]; public 3DMovingBodies() { rand = new Random(); float angleInDegree = rand.nextInt(360); setLayout(new BorderLayout()); GraphicsConfiguration config = SimpleUniverse .getPreferredConfiguration(); Canvas3D c = new Canvas3D(config); add("Center", c); ball[0] = new Ball(0.5f, 0.0f, 0.5f, 0.4f, angleInDegree, Color.yellow); // ball[1] = new Ball(1.0f, 0.0f, 0.25f, 0.8f, angleInDegree, // Color.yellow); // ball[2] = new Ball(0.0f, 1.0f, 0.15f, 0.11f, angleInDegree, // Color.yellow); trans[0] = new Transform3D(); // trans[1] = new Transform3D(); // trans[2] = new Transform3D(); sphere[0] = new Sphere(0.5f); // sphere[1] = new Sphere(0.25f); // sphere[2] = new Sphere(0.15f); // Create a simple scene and attach it to the virtual universe BranchGroup scene = createSceneGraph(); SimpleUniverse u = new SimpleUniverse(c); u.getViewingPlatform().setNominalViewingTransform(); u.addBranchGraph(scene); startSimulation(); } public BranchGroup createSceneGraph() { // Create the root of the branch graph BranchGroup objRoot = new BranchGroup(); for (int i = 0; i < currentNumBalls; i++) { // Create a simple shape leaf node, add it to the scene graph. objTrans[i] = new TransformGroup(); objTrans[i].setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); Transform3D pos1 = new Transform3D(); pos1.setTranslation(randomPos()); objTrans[i].setTransform(pos1); objTrans[i].addChild(sphere[i]); objRoot.addChild(objTrans[i]); } BoundingSphere bounds = new BoundingSphere(new Point3d(0.0, 0.0, 0.0), 100.0); Color3f light1Color = new Color3f(1.0f, 0.0f, 0.2f); Vector3f light1Direction = new Vector3f(4.0f, -7.0f, -12.0f); DirectionalLight light1 = new DirectionalLight(light1Color, light1Direction); light1.setInfluencingBounds(bounds); objRoot.addChild(light1); // Set up the ambient light Color3f ambientColor = new Color3f(1.0f, 1.0f, 1.0f); AmbientLight ambientLightNode = new AmbientLight(ambientColor); ambientLightNode.setInfluencingBounds(bounds); objRoot.addChild(ambientLightNode); return objRoot; } public void startSimulation() { playing = true; Thread t = new Thread(this); t.start(); } public void stop() { playing = false; } public void run() { long previousTime = System.currentTimeMillis(); long currentTime = previousTime; long elapsedTime; long totalElapsedTime = 0; int frameCount = 0; while (true) { currentTime = System.currentTimeMillis(); elapsedTime = (currentTime - previousTime); // elapsed time in // seconds totalElapsedTime += elapsedTime; if (totalElapsedTime > 1000) { currentFrameRate = frameCount; frameCount = 0; totalElapsedTime = 0; } for (int i = 0; i < currentNumBalls; i++) { ball[i].move(); ball[i].collideWith(); drawworld(); } try { Thread.sleep(88); } catch (Exception e) { e.printStackTrace(); } previousTime = currentTime; frameCount++; } } public void drawworld() { for (int i = 0; i < currentNumBalls; i++) { printTG(objTrans[i], "SteerTG"); trans[i].setTranslation(new Vector3f(ball[i].getX(), ball[i].getY(), 0.0f)); objTrans[i].setTransform(trans[i]); } } private Vector3f randomPos() /* * Return a random position vector. The numbers are hardwired to be within * the confines of the box. */ { Vector3f pos = new Vector3f(); pos.x = rand.nextFloat() * 5.0f - 2.5f; // -2.5 to 2.5 pos.y = rand.nextFloat() * 2.0f + 0.5f; // 0.5 to 2.5 pos.z = rand.nextFloat() * 5.0f - 2.5f; // -2.5 to 2.5 return pos; } // end of randomPos() public static void main(String[] args) { System.out.println("Program Started"); 3DMovingBodiesbb = new 3DMovingBodies(); bb.addKeyListener(bb); MainFrame mf = new MainFrame(bb, 600, 400); } }

Read the article

Online Password Security Tactics

- by BuckWoody

Recently two more large databases were attacked and compromised, one at the popular Gawker Media sites and the other at McDonald’s. Every time this kind of thing happens (which is FAR too often) it should remind the technical professional to ensure that they secure their systems correctly. If you write software that stores passwords, it should be heavily encrypted, and not human-readable in any storage. I advocate a different store for the login and password, so that if one is compromised, the other is not. I also advocate that you set a bit flag when a user changes their password, and send out a reminder to change passwords if that bit isn’t changed every three or six months. But this post is about the *other* side – what to do to secure your own passwords, especially those you use online, either in a cloud service or at a provider. While you’re not in control of these breaches, there are some things you can do to help protect yourself. Most of these are obvious, but they contain a few little twists that make the process easier. Use Complex Passwords This is easily stated, and probably one of the most un-heeded piece of advice. There are three main concepts here: · Don’t use a dictionary-based word · Use mixed case · Use punctuation, special characters and so on So this: password Isn’t nearly as safe as this: P@ssw03d Of course, this only helps if the site that stores your password encrypts it. Gawker does, so theoretically if you had the second password you’re in better shape, at least, than the first. Dictionary words are quickly broken, regardless of the encryption, so the more unusual characters you use, and the farther away from the dictionary words you get, the better. Of course, this doesn’t help, not even a little, if the site stores the passwords in clear text, or the key to their encryption is broken. In that case… Use a Different Password at Every Site What? I have hundreds of sites! Are you kidding me? Nope – I’m not. If you use the same password at every site, when a site gets attacked, the attacker will store your name and password value for attacks at other sites. So the only safe thing to do is to use different names or passwords (or both) at each site. Of course, most sites use your e-mail as a username, so you’re kind of hosed there. So even though you have hundreds of sites you visit, you need to have at least a different password at each site. But it’s easier than you think – if you use an algorithm. What I’m describing is to pick a “root” password, and then modify that based on the site or purpose. That way, if the site is compromised, you can still use that root password for the other sites. Let’s take that second password: P@ssw03d And now you can append, prepend or intersperse that password with other characters to make it unique to the site. That way you can easily remember the root password, but make it unique to the site. For instance, perhaps you read a lot of information on Gawker – how about these: P@ssw03dRead ReadP@ssw03d PR@esasdw03d If you have lots of sites, tracking even this can be difficult, so I recommend you use password software such as Password Safe or some other tool to have a secure database of your passwords at each site. DO NOT store this on the web. DO NOT use an Office document (Microsoft or otherwise) that is “encrypted” – the encryption office automation packages use is very trivial, and easily broken. A quick web search for tools to do that should show you how bad a choice this is. Change Your Password on a Schedule I know. It’s a real pain. And it doesn’t seem worth it…until your account gets hacked. A quick note here – whenever a site gets hacked (and I find out about it) I change the password at that site immediately (or quit doing business with them) and then change the root password on every site, as quickly as I can. If you follow the tip above, it’s not as hard. Just add another number, year, month, day, something like that into the mix. It’s not unlike making a Primary Key in an RDBMS. P@ssw03dRead10242010 Change the site, and then update your password database. I do this about once a month, on the first or last day, during staff meetings. (J) If you have other tips, post them here. We can all learn from each other on this.

Read the article

How should I work out VAT (UK tax) in my eCommerce site?

- by Leonard Challis

We have an ecommerce system in place. The sales actually go through Sage, so we have an export script from our system that uses a third-party Sage Importer program. With a new version of this importer, values are checked more thoroughly. We are getting 1 pence discrepancies because of the way rounding works - our system has always held prices and worked to 4 decimal places. In the checkout the totals would be worked out first, then the rounding to 2 decimal places. The importer does rounding first, though. So, for instance: Our way: Product 1: £13.4561 Qty: 2 Total inc VAT = £32.29 (to 2dp) Importer way: Our way: Product 1: £13.4561 Qty: 2 Total inc VAT = £32.30 (to 2dp) Management are reluctant to lose the 4dp but the developers of the Sage importer have said that this is correct and makes sense -- you woudn't sell a product for £13.4561 in a shop, nor would you charge someone tax at 4 decimal places. I contacted the HMRC and the operator didn't really give me much to go on, telling me a technician would phone back, to which they haven't and I'm still waiting after almost a week and numerous follow-up calls. I did find a PDF on the HMRC's web site, but this did about us much to confuse me as it did to answer my questions. I see that they're happy for people to round up or down, as long it is consistent, but I can't tell whether it should be done on a line by line basis or on the end total of the order. We are now in the position where we need to decide whether it's worth us doing one of the following, or something completely different. Please advise with any experience or information I can read. Change all products on the site to use 2dp Keep 4dp but round each line in the order to 2dp before working out tax Keep it as it is and "fudge" the values at the export script (i.e. make that values correct by adding or subtracting 1p and changing the shipping cost to make the totals still work out) Any thoughts?

Read the article

VHOST not working in Apache

- by Starx

I got a LAMP server working in Ubuntu 11.04. Now the problem is that the websites have to enabled and disabled from the terminal. All all of them have to be accessed from http://localhost which is not so much efficient. So I created a VHOSTS, using some tutorials off the net. Here is the coding for it <VirtualHost *:80> ServerAdmin webmaster@localhost Servername site.com ServerAlias www.site.com DocumentRoot /home/starx/public_html/site/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/starx/public_html/site/public> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> nGen ErrorLog ${APACHE_LOG_DIR}/site-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/site-access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Now, still I can't access the page in http://site.com but if i access using http://localhsot/ it is accessed. I have disabled all others site including default and have just enabled one site i.e. site How to fix this?

Read the article

Is there a pattern or best practice for passing a reference type to multiple classes vs a static class?

- by Dave

My .NET application creates HTML files, and as such, the structure looks like variable myData BuildHomePage() variable graph = new BuildGraphPage(myData) variable table = BuildTablePage(myData) BuildGraphPage and BuildTablePage both require access data, the myData object. In the above example, I've passed the myData object to 2 constructors. This is what I'm doing now, in my current project. The myData object, and it's properties are all readonly. The problem is, the number of pages which will require this object has grown. In the real project, there are currently 4, but the new spec is to have about 20. Passing this object to the constructor of each new object and assigning it to a field is a little time consuming, but not a hardship! This poses the question whether it's better practice to continue as I have, or to refactor and create a new static class for myData which can be referenced from any where in my project. I guess my abilities to use Google are poor, because I did try and find an appropriate pattern as I am sure this type of design must be common place but my results returned nothing. Is there a pattern which is suited, or do best practices lean towards one implementation over another.

Search Results

Search found 37739 results on 1510 pages for 'static site'.

Page 148/1510 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155 | Next Page >

- by Chris

- by SJaguar13

- by Bec

- by kasper_341

- by Jitendra vyas

- by deepc

- by user1725

- by matt b

- by Fábio Santos

- by raindog308

- by user960567

- by nLinked

- by numerical25

- by kopobamypa

- by kopobamypa

- by SeanMcAlinden

- by Ricardo Ferreira

- by ScottGu

- by AngelEyes

- by Rosamunda Rosamunda

- by static void main

- by BuckWoody

- by Leonard Challis

- by Starx

- by Dave

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155 | Next Page >