Search Results

Search found 8552 results on 343 pages for '14 04 1'.

Page 149/343 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Forward all traffic through an ssh tunnel

    - by Eamorr
    I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected].1.224 -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

    Read the article

  • Why are emails sent from my applications being marked as spam?

    - by Brian
    Hi. I have 2 web apps running on the same server. The first is www.nimikri.com and the other is www.hourjar.com. Both apps share the same IP address (75.127.100.175). My server is through a shared hosting company. I've been testing my apps, and at first all my emails were being delivered to me just fine. Then a few days ago every email from both apps got dumped into my spam box (in gmail and google apps). So far the apps have just been sending emails to me and nobody else, so I know people aren't manually flagging them as spam. I did a reverse DNS lookup for my IP and the results I got were these: 100.127.75.in-addr.arpa NS DNS2.GNAX.NET. 100.127.75.in-addr.arpa NS DNS1.GNAX.NET. Should the reverse DNS lookup point to nimikri.com and hourjar.com, or are they set up fine the way they are? I noticed in the email header these 2 lines: Received: from nimikri.nimikri.com From: Hour Jar <[email protected]> Would the different domain names be causing gmail to think this is spam? Here is the header from one of the emails. Please let me know if any of this looks like a red flag for spam. Thanks. Delivered-To: [email protected] Received: by 10.231.157.85 with SMTP id a21cs54749ibx; Sun, 25 Apr 2010 10:03:14 -0700 (PDT) Received: by 10.151.130.18 with SMTP id h18mr3056714ybn.186.1272214992196; Sun, 25 Apr 2010 10:03:12 -0700 (PDT) Return-Path: <[email protected]> Received: from nimikri.nimikri.com ([75.127.100.175]) by mx.google.com with ESMTP id 28si4358025gxk.44.2010.04.25.10.03.11; Sun, 25 Apr 2010 10:03:11 -0700 (PDT) Received-SPF: neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=75.127.100.175; Authentication-Results: mx.google.com; spf=neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] Received: from nimikri.nimikri.com (localhost.localdomain [127.0.0.1]) by nimikri.nimikri.com (8.14.3/8.14.3) with ESMTP id o3PH3A7a029986 for <[email protected]>; Sun, 25 Apr 2010 12:03:11 -0500 Date: Sun, 25 Apr 2010 12:03:10 -0500 From: Hour Jar <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: [email protected] has invited you to New Event MIME-Version: 1.0 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

    Read the article

  • Install SAS/SATA backplane in Dell PowerVault 220S

    - by e151280
    Is the backplane of a Dell PowerVault 220S svc tag 3sdpcb1 (14 drive, 80 pin hot swap scsi) upgradeable to a SAS/SATA backplane & controller card replacement? The unit already seems to be quite modular, with slide-out replaceable scsi controllers/connectors on the back, and slide out redundant power supplies. With everything else so modular, the backplane would seem to be the next logically upgradeable part of this unit. Thanks in advance for your input

    Read the article

  • How to specify what network interface to use with TTCP or IPERF?

    - by Sammy
    The PC has two Gigabit Ethernet ports. They function as two separate network adapters. I'm trying to do a simple loopback test between the two. I've tried TTCP and IPERF. They're giving me hard time because I'm using the same physical PC. Using pcattcp... On the receiver end: C:\PCATTCP-0114>pcattcp -r PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Receive Test 0... TCP Receive Test Local Host : GIGA ************** Listening...: On TCPv4 0.0.0.0:5001 Accept : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 Buffer Size : 8192; Alignment: 16384/0 Receive Mode: Sinking (discarding) Data Statistics : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 16777216 bytes in 0.076 real seconds = 215578.95 KB/sec +++ numCalls: 2052; msec/call: 0.038; calls/sec: 27000.000 C:\PCATTCP-0114> On the transmitter end: C:\PCATTCP-0114>PCATTCP.exe -t 10.1.1.1 PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Transmit Test 0... TCP Transmit Test Transmit : TCPv4 0.0.0.0 -> 10.1.1.1:5001 Buffer Size : 8192; Alignment: 16384/0 TCP_NODELAY : DISABLED (0) Connect : Connected to 10.1.1.1:5001 Send Mode : Send Pattern; Number of Buffers: 2048 Statistics : TCPv4 0.0.0.0 -> 10.1.1.1:5001 16777216 bytes in 0.075 real seconds = 218453.33 KB/sec +++ numCalls: 2048; msec/call: 0.037; calls/sec: 27306.667 C:\PCATTCP-0114> It's responding alright. But why does it say 0.0.0.0? Is it passing through only one of the network adapters? I want 10.1.1.1 to be the server (receiver) and 10.1.1.2 to be the client (transmitter). These are the IP addresses assigned manually to each network adapter. How do I specify these addresses in TTCP? There is also the IPERF tool which has the -B option. Unfortunately I've been only able to use this option to bind the server to the 10.1.1.1 address. I was unable to bind the client to the 10.1.1.2 address. I might be doing it wrong. Can the -B option be used for both the server as well as the client side? What does the syntax look like for the client?

    Read the article

  • Excessive CPU Utilization for Bind 9.8.1 `named` processes

    - by justinzane
    I just noticed that named is eating vast amounts of CPU time for a very small network with only a few domains. Can someone help me determine what is misconfigured, please? Or how to debug this. top top - 14:13:08 up 25 days, 14:16, 1 user, load average: 1.04, 1.04, 1.05 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.3 us, 4.3 sy, 0.0 ni, 78.2 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 2042776 total, 1347916 used, 694860 free, 249396 buffers KiB Swap: 3976080 total, 30552 used, 3945528 free, 574164 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17445 bind 20 0 244m 42m 3124 S 99.4 2.2 2345:03 named rndc stats +++ Statistics Dump +++ (1352931389) ++ Incoming Requests ++ 65869 QUERY ++ Incoming Queries ++ 31809 A 241 NS 3 CNAME 27455 SOA 276 PTR 123 MX 462 TXT 5400 AAAA 7 A6 1 DS 14 DNSKEY 15 SPF 55 AXFR 8 ANY ++ Outgoing Queries ++ [View: internal] 22206 A 509 NS 10 SOA 25 PTR 12 MX 524 TXT 4851 AAAA 62 DNSKEY 19 SPF 3157 DLV [View: external] 87 A 2 NS 80 AAAA 120 DNSKEY 7 DLV [View: _bind] ++ Name Server Statistics ++ 65869 IPv4 requests received 27670 requests with EDNS(0) received 112 TCP requests received 65652 responses sent 20 truncated responses sent 27670 responses with EDNS(0) sent 62920 queries resulted in successful answer 37117 queries resulted in authoritative answer 28482 queries resulted in non authoritative answer 7 queries resulted in referral answer 591 queries resulted in nxrrset 53 queries resulted in SERVFAIL 2081 queries resulted in NXDOMAIN 14530 queries caused recursion 162 duplicate queries received 55 requested transfers completed ++ Zone Maintenance Statistics ++ 109536 IPv4 notifies sent ++ Resolver Statistics ++ [Common] [View: internal] 29362 IPv4 queries sent 2013 IPv6 queries sent 28531 IPv4 responses received 4209 NXDOMAIN received 6 SERVFAIL received 31 FORMERR received 32 EDNS(0) query failures 3359 query retries 836 query timeouts 5348 IPv4 NS address fetches 3271 IPv6 NS address fetches 83 IPv4 NS address fetch failed 2779 IPv6 NS address fetch failed 17421 DNSSEC validation attempted 12731 DNSSEC validation succeeded 4690 DNSSEC NX validation succeeded 21104 queries with RTT 10-100ms 7418 queries with RTT 100-500ms 3 queries with RTT 500-800ms 1 queries with RTT 800-1600ms [View: external] 192 IPv4 queries sent 104 IPv6 queries sent 192 IPv4 responses received 2 NXDOMAIN received 104 query retries 44 IPv4 NS address fetches 44 IPv6 NS address fetches 1 IPv4 NS address fetch failed 1 IPv6 NS address fetch failed 4 DNSSEC validation attempted 3 DNSSEC validation succeeded 1 DNSSEC NX validation succeeded 152 queries with RTT 10-100ms 40 queries with RTT 100-500ms [View: _bind] ++ Cache DB RRsets ++ [View: internal (Cache: internal)] 2007 A 652 NS 131 CNAME 1 MX 32 TXT 421 AAAA 28 DS 244 RRSIG 110 NSEC 3 DNSKEY 2 !A 2 !TXT 89 !AAAA 2 !SPF 14 !DLV 148 NXDOMAIN [View: external (Cache: external)] 55 A 12 NS 34 AAAA 2 DS 10 RRSIG 1 DNSKEY [View: _bind (Cache: _bind)] ++ Socket I/O Statistics ++ 82958 UDP/IPv4 sockets opened 2118 UDP/IPv6 sockets opened 4 TCP/IPv4 sockets opened 1 TCP/IPv6 sockets opened 82956 UDP/IPv4 sockets closed 2117 UDP/IPv6 sockets closed 58 TCP/IPv4 sockets closed 15 UDP/IPv4 socket bind failures 2117 UDP/IPv6 socket connect failures 29554 UDP/IPv4 connections established 59 TCP/IPv4 connections accepted 2117 UDP/IPv6 send errors 5 UDP/IPv4 recv errors ++ Per Zone Query Statistics ++ --- Statistics Dump --- (1352931389)

    Read the article

  • Shows error message "ialmrnt 5 display driver stooped working".

    - by user68705
    when ever i play movie with high resolution(720hz) My Destop PC shows a black screen and after a while shows message "ialmrnt 5 display driver stooped working". and i am having the following configuration 1GB RAM DDR1 windows xp OS processor- Intel Pentium 4 Processor Srm-Motherboard Graphics Driver Product Detected -Intel® 845G Current Driver Installed-6.14.10.3889 Intel Chipset Software Installation Utility (Chipset INF) - Current Version Installed 9.1.0.1012 kindly help me to fix this problem

    Read the article

  • sendmail on ubuntu (9.10) machine "stopped" sending mail

    - by Doron
    I'm developing on my ubuntu 9.10 machine for the web (php). I'm using it sendmail for sending mails, and while developing on my local machine, I send local mails (to my user 'doron'). Up until a few days ago, I was able to send mails both from php's mail() function, and from the command line using the mail command. I'm using sendmail with mailutils. Since the last few days, it seems like it stopped working. When I try to send mail from the command line, I get the following in my syslog (and mail.info, and mail.log): Mar 3 13:27:58 doron-desktop sendmail[4693]: o23BRwlA004693: from=doron, size=84, class=0, nrcpts=1, msgid=<201003031127.o23BRwlA004693@doron-desktop.>, relay=doron@localhost Mar 3 13:27:58 doron-desktop sm-mta[4694]: o23BRwtQ004694: ruleset=check_rcpt, arg1=<doron@doron-desktop>, relay=localhost [127.0.0.1], reject=553 5.1.8 <doron@doron-desktop>... Domain of sender address doron@doron-desktop does not exist Mar 3 13:27:58 doron-desktop sendmail[4693]: o23BRwlA004693: to=<doron@doron-desktop>, ctladdr=doron (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30084, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.8, stat=User unknown Mar 3 13:27:58 doron-desktop sm-mta[4694]: o23BRwtQ004694: from=<doron@doron-desktop>, size=84, class=0, nrcpts=0, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Trying to telnet locally to port 25 results in the following (same output for doron@doron-desktop): doron@doron-desktop:/var/mail$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 doron-desktop. ESMTP Sendmail 8.14.3/8.14.3/Debian-9ubuntu1; Wed, 3 Mar 2010 13:26:06 +0200; (No UCE/UBE) logging access from: localhost(OK)-localhost [127.0.0.1] helo localhost 250 doron-desktop. Hello localhost [127.0.0.1], pleased to meet you mail from: doron@localhost 250 2.1.0 doron@localhost... Sender ok rcpt to: root@localhost 553 5.1.8 root@localhost... Domain of sender address doron@doron-desktop does not exist However - if I do the same, but use [email protected].1 in the mail from field, I get: 250 2.1.5 root... Recipient ok My /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 doron-desktop doron-desktop. (If I don't have the "doron-desktop." (with the ending dot), the mail command takes a lot of time (around 30 seconds) until it responds, but the results are the same.)

    Read the article

  • samba 3.5 "force user" doesn't seem to be sticking

    - by myCubeIsMyCell
    After installing a new OS with newer version of samba, I'm having trouble accessing my shares. I can browse to the specific share, but only to the top level. As best I can tell from the logs, it seems the "force user" in the samba config isn't sticking beyond the initial connection. Details below. I installed a new version of CentOS on my storage server. My old CentOS (4?)install had samba version 3.0.33, new CentOS is using 3.5.10. No domain/AD involved ... just home workgroup. no real security... just some shares hidden & some defined as read-only. here's my config: [global] workgroup = WORKGROUP server string = Samba Server Version %v netbios name = luna security = share # logs split per machine log file = /var/log/samba/log.%m log level = 2 # max 50KB per log file, then rotate max log size = 50 winbind use default domain = Yes [strge] comment = please path = /storage browseable = yes read only = no force user = windowsguest force group = users guest ok = yes So... the problem I'm running into is that the 'force user' only seems to hold for the initial connection & I see all the top level folders fine. When I drill into a folder I get access denied - which appears to be due to my windows user info being sent (trys to authenticate xuser - a non-existant user to samba, so maps to nobody & fails). Here's the smb error msg: [2012/11/29 14:30:27.326195, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [xuser] -> [xuser] FAILED with error NT_STATUS_NO_SUCH_USER [2012/11/29 14:30:27.326251, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [nobody] -> [nobody] FAILED with error NT_STATUS_NO_SUCH_USER Most of the top level directories are 755, some 777. Either way, can not access them. If I do a chown -R windowsguest.users ... no change... but if I do a chmod -R to 777 or 755 they become browsable... but still can't create files (even for 777 ones). Not sure what role it plays if any... but had to recreate the user windowsguest under the new os install, uid & gid match old user. Seems the main issue as far as I can tell is that samba isn't maintaining the 'force user' - but I could be wildly off base. Client OS is win7 pro x64. Thanks for any suggestions or advice!

    Read the article

  • Enabling login logging in Ubuntu 9.10

    - by Sopa Christian
    On a Ubuntu 9.10 system: $ uname -a Linux ionut-laptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux the files /var/log/wtmp and /var/log/btmp are empty: $ ls -la /var/log/?tmp -rw-rw---- 1 root utmp 0 2010-04-10 16:54 /var/log/btmp -rw-rw-r-- 1 root utmp 0 2010-04-10 16:54 /var/log/wtmp Because of this, the last(1) command is not working. What to do?

    Read the article

  • LVS Configuration issue (Using piranha Tool)

    - by PravinG
    I have configured LVS on cent os using piranha tool .I am using vip of internal n/w as gateway for real server we have two NIC one having exteranl Ip and other for internal n/w which is on 192.168.3.0/24 network. But I am not able to connect from client it shows connection refused error . Please suggest iptables rules for private n public n/w to communicate. May be I am missing this . Iptables rules that we have added are : iptables -t nat -A POSTROUTING -p tcp -s 192.168.3.0/24 --sport 5000 -j MASQUERADE this is my ipconfig: eth0 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.133 Bcast:122.166.233.255 Mask:255.255.255.0 inet6 addr: fe80::200:e8ff:fef6:74da/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94433 errors:0 dropped:0 overruns:0 frame:0 TX packets:130966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9469972 (9.0 MiB) TX bytes:19929308 (19.0 MiB) Interrupt:16 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.136 Bcast:122.166.233.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:20ff:fe14:f92d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:123718 errors:0 dropped:0 overruns:0 frame:0 TX packets:148856 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18738556 (17.8 MiB) TX bytes:11697153 (11.1 MiB) Interrupt:17 Memory:60000400-600004ff eth1:1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.10 Bcast:192.168.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:17 Memory:60000400-600004ff eth2 Link encap:Ethernet HWaddr 00:16:76:6E:D1:D2 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:21 Base address:0xa500 and ipvsadm -ln command [root@abts-kk-static-133 ~]# ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 122.166.233.136:5000 wlc TCP 122.166.233.136:5004 wlc lvs server routing table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 122.166.233.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 eth1 0.0.0.0 122.166.233.1 0.0.0.0 UG 0 0 0 eth0 real 1 real 2 we have configured various ports from 5000:5008 . Do we need to this iptables for all ports? Suggest me how should I solve this issue.

    Read the article

  • Asterisk Outgoing CDR Logging To Mysql

    - by user3295551
    Trying to utilize the cdr logging (to mysql) using custom fields. The problem I am facing is only when an outbound call is placed, during inbound calls the custom field I am able to log no problem. The reason I am having an issue is because the custom cdr field I need is a unique value for each user on the system. sip.conf ... ... [sales_department](!) type=friend host=dynamic context=SalesAgents disallow=all allow=ulaw allow=alaw qualify=yes qualifyfreq=30 ;; company sales agents: [11](sales_agent) secret=xxxxxx callerid="<...>" [12](sales_agent) secret=xxxxxx callerid="<...>" [13](sales_agent) secret=xxxxxx callerid="<...>" [14](sales_agent) secret=xxxxxx callerid="<...>" extensions.conf [SalesAgents] include => Services ; Outbound calls exten=>_1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@myprovider) ; Inbound calls exten=>100,1,NoOp() same => n,Set(CDR(agent_id)=11) same => n,CELGenUserEvent(Custom Event) same => n,Dial(${11_1},25) same => n,GotoIf($["${DIALSTATUS}" = "BUSY"]?busy:unavail) same => n(unavail),VoiceMail(11@asterisk) same => n,Hangup() same => n(busy),VoiceMail(11@asterisk) same => n,Hangup() exten=>101,1,NoOp() same => n,Set(CDR(agent_id)=12) same => n,CELGenUserEvent(Custom Event) same => n,Dial(${12_1},25) same => n,GotoIf($["${DIALSTATUS}" = "BUSY"]?busy:unavail) same => n(unavail),VoiceMail(12@asterisk) same => n,Hangup() same => n(busy),VoiceMail(12@asterisk) same => n,Hangup() ... ... For the inbound section of the dialplan in the above example I am able to insert the custom cdr field (agent_id). But above it you can see for the Oubound section of the dialplan I have been stumped on how I would be able to tell the dialplan which agent_id is making the outbound call. My Question: how to take the agent_id=[11] & agent_id=[12] and agent_id=[13] and agent_id=[14] etc and use that as a custom field for cdr on outbound calls?

    Read the article

  • Mnemonic external IP

    - by Click Ok
    When diagnosing networking problems, I ping to: My local IP My gateway IP An external IP An external domain name Usually, when troubleshooting, the internet is unaccessible, then I need to remember an external IP address. I need any (easy to remember) IP address. By example, google ip is 72.14.204.147. Cool, but it's hard to remember... What external IP you use? Do you have an mnemonic external IP address, then will be easy to remember?

    Read the article

  • How can I capture webcam view with Microsoft Movie Maker

    - by Edward Tanguay
    I used to use Microsoft Movie Maker to record video from my webcam. Now I have Win7 and just downloaded the latest version of movie maker (14.0.8091.0730), the one that has the Office-10-like Ribbon on the top. But in this version I find no way to capture video as in the older versions. How can I capture video from my webcam with this newest version of Movie Maker?

    Read the article

  • Workaround with paths in vista

    - by Argiropoulos Stavros
    Not really a programming question but i think quite relative. I have a .exe running in my windows XP PC. This exe needs a file in the same directory to run and has no problem finding it in XP BUT in Vista(I tried this in several machines and works in some of them) fails to run. I'm guessing there is a problem finding the path.The program is written in basic(Yes i know..) I attach the code below. Can you think of any workarounds? Thank you The exe is located in c:\tools Also the program runs in windows console(It starts but then during the execution cannot find a custom file type .TOP made by the creator of the program) ' PROGRAMM TOP11.BAS DEFDBL A-Z CLS LOCATE 1, 1 COLOR 14, 1 FOR i = 1 TO 80 PRINT "±"; NEXT i LOCATE 1, 35: PRINT "?? TOP11 ??" PRINT " €€‚—‚„‘ ’— ‹„’†‘„— ‘’† „”€„€ ’†‘ ‡€€‘‘†‘ ‰€ † „.‚.‘.€. " COLOR 7, 0 PRINT "-------------------------------------------------------------------------------" PRINT INPUT "ƒ?©« «¦¤ ©¬¤«?©«? ¤???... : ", Factor# INPUT "¤¦£ ¨®e¦¬ [.TOP] : ", topfile$ VIEW PRINT 7 TO 25 file1$ = topfile$ + ".TOP" file2$ = topfile$ + ".T_P" file3$ = "Syntel" OPEN file3$ FOR OUTPUT AS #3 PRINT #3, " ‘¬¤«?©«?? ¤??? = " + STR$(Factor#) + " †‹„‹†€: " + DATE$ CLOSE #3 command1$ = "copy" + " " + file1$ + " " + file2$ SHELL command1$ '’¦ ¨®e¦ .TOP ¤« ¨a­«  £ «¤ ?«a?¥ .T_P OPEN file2$ FOR INPUT AS #1 OPEN file1$ FOR OUTPUT AS #2 bb$ = " \\\ \ , ###.#### ###.#### ####.### ##.### " DO LINE INPUT #1, Line$ Line$ = RTRIM$(LTRIM$(Line$)) icode$ = LEFT$(Line$, 1) IF icode$ = "1" THEN Line$ = " " + Line$ PRINT #2, Line$ PRINT Line$ ELSEIF icode$ = "2" THEN Line$ = " " + Line$ PRINT #2, Line$ PRINT Line$ ELSEIF icode$ = "3" THEN Number$ = MID$(Line$, 3, 6) Hangle = VAL(MID$(Line$, 14, 9)) Zangle = VAL(MID$(Line$, 25, 9)) Distance = VAL(MID$(Line$, 36, 9)) Distance = Distance * Factor# Height = VAL(MID$(Line$, 48, 6)) PRINT #2, USING bb$; icode$; Number$; Hangle; Zangle; Distance; Height PRINT USING bb$; icode$; Number$; Hangle; Zangle; Distance; Height ELSE END IF LOOP UNTIL EOF(1) VIEW PRINT CLS LOCATE 1, 1 PRINT " *** ’„‘ ’“ ‚€‹‹€’‘ *** " END

    Read the article

  • Failed to convert a wmv file to mp4 with ffmpeg

    - by Olaf Erlandsen
    i need a help with this command FFMPEG COMMAND: ffmpeg -y -i /input.wmv -vcodec libx264 -acodec libfaac -ac 2 -bufsize 20M -sameq -f mp4 /output.mp4 Output: ffmpeg version 1.0 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 9 2012 07:04:08 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from '/input.wmv': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:01:35.10, start: 0.000000, bitrate: 496 kb/s Stream #0:0(spa): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 64 kb/s Stream #0:1(spa): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 320x240, 425 kb/s, SAR 1:1 DAR 4:3, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 0x16c3000] VBV bufsize set but maxrate unspecified, ignored [libx264 @ 0x16c3000] using SAR=1/1 [libx264 @ 0x16c3000] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x16c3000] profile High, level 1.3 [libx264 @ 0x16c3000] 264 - core 128 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Output #0, mp4, to '/output.mp4': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 encoder : Lavf54.29.104 Stream #0:0(spa): Video: h264 ([33][0][0][0] / 0x0021), yuv420p, 320x240 [SAR 1:1 DAR 4:3], q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(spa): Audio: aac ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (wmv3 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libfaac) Press [q] to stop, [?] for help [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping frame= 144 fps=0.0 q=29.0 size= 207kB time=00:00:03.38 bitrate= 500.3kbits/s frame= 259 fps=257 q=29.0 size= 447kB time=00:00:07.30 bitrate= 501.3kbits/s frame= 375 fps=248 q=29.0 size= 668kB time=00:00:11.01 bitrate= 496.5kbits/s frame= 487 fps=241 q=29.0 size= 836kB time=00:00:14.85 bitrate= 460.7kbits/s frame= 605 fps=240 q=29.0 size= 1080kB time=00:00:18.92 bitrate= 467.4kbits/s frame= 719 fps=238 q=29.0 size= 1306kB time=00:00:22.80 bitrate= 469.2kbits/s frame= 834 fps=237 q=29.0 size= 1546kB time=00:00:26.52 bitrate= 477.3kbits/s frame= 953 fps=237 q=29.0 size= 1763kB time=00:00:30.27 bitrate= 477.0kbits/s frame= 1071 fps=237 q=29.0 size= 1986kB time=00:00:34.36 bitrate= 473.4kbits/s frame= 1161 fps=231 q=29.0 size= 2160kB time=00:00:37.21 bitrate= 475.4kbits/s frame= 1221 fps=220 q=29.0 size= 2282kB time=00:00:39.53 bitrate= 472.9kbits/s frame= 1280 fps=212 q=29.0 size= 2392kB time=00:00:41.16 bitrate= 476.1kbits/s frame= 1331 fps=203 q=29.0 size= 2502kB time=00:00:43.23 bitrate= 474.1kbits/s frame= 1379 fps=195 q=29.0 size= 2618kB time=00:00:44.72 bitrate= 479.6kbits/s frame= 1430 fps=189 q=29.0 size= 2733kB time=00:00:46.34 bitrate= 483.0kbits/s frame= 1487 fps=184 q=29.0 size= 2851kB time=00:00:48.40 bitrate= 482.6kbits/s frame= 1546 fps=180 q=26.0 size= 2973kB time=00:00:50.43 bitrate= 482.9kbits/s frame= 1610 fps=177 q=29.0 size= 3112kB time=00:00:52.40 bitrate= 486.5kbits/s frame= 1672 fps=174 q=29.0 size= 3231kB time=00:00:54.35 bitrate= 487.0kbits/s frame= 1733 fps=171 q=29.0 size= 3348kB time=00:00:56.51 bitrate= 485.3kbits/s frame= 1792 fps=169 q=29.0 size= 3459kB time=00:00:58.28 bitrate= 486.2kbits/s frame= 1851 fps=166 q=29.0 size= 3588kB time=00:01:00.32 bitrate= 487.2kbits/s frame= 1910 fps=164 q=29.0 size= 3716kB time=00:01:02.36 bitrate= 488.1kbits/s frame= 1972 fps=162 q=29.0 size= 3833kB time=00:01:04.45 bitrate= 487.1kbits/s frame= 2032 fps=161 q=29.0 size= 3946kB time=00:01:06.40 bitrate= 486.8kbits/s frame= 2091 fps=159 q=29.0 size= 4080kB time=00:01:08.35 bitrate= 488.9kbits/s frame= 2150 fps=158 q=29.0 size= 4201kB time=00:01:10.54 bitrate= 487.9kbits/s frame= 2206 fps=156 q=29.0 size= 4315kB time=00:01:12.39 bitrate= 488.3kbits/s frame= 2263 fps=154 q=29.0 size= 4438kB time=00:01:14.21 bitrate= 489.9kbits/s frame= 2327 fps=154 q=29.0 size= 4567kB time=00:01:16.16 bitrate= 491.2kbits/s frame= 2388 fps=152 q=29.0 size= 4666kB time=00:01:18.48 bitrate= 487.0kbits/s frame= 2450 fps=152 q=29.0 size= 4776kB time=00:01:20.24 bitrate= 487.6kbits/s frame= 2511 fps=151 q=29.0 size= 4890kB time=00:01:22.15 bitrate= 487.6kbits/s frame= 2575 fps=150 q=29.0 size= 5015kB time=00:01:24.42 bitrate= 486.6kbits/s frame= 2635 fps=149 q=29.0 size= 5130kB time=00:01:26.62 bitrate= 485.2kbits/s frame= 2695 fps=148 q=29.0 size= 5258kB time=00:01:28.65 bitrate= 485.9kbits/s frame= 2758 fps=147 q=29.0 size= 5382kB time=00:01:30.64 bitrate= 486.4kbits/s frame= 2816 fps=147 q=29.0 size= 5521kB time=00:01:32.69 bitrate= 487.9kbits/s get_buffer() failed Error while decoding stream #0:0: Invalid argument frame= 2848 fps=143 q=-1.0 Lsize= 5787kB time=00:01:35.10 bitrate= 498.4kbits/s video:5099kB audio:581kB subtitle:0 global headers:0kB muxing overhead 1.884230% [libx264 @ 0x16c3000] frame I:12 Avg QP:22.64 size: 12092 [libx264 @ 0x16c3000] frame P:1508 Avg QP:25.39 size: 2933 [libx264 @ 0x16c3000] frame B:1328 Avg QP:30.62 size: 491 [libx264 @ 0x16c3000] consecutive B-frames: 10.0% 80.8% 8.1% 1.1% [libx264 @ 0x16c3000] mb I I16..4: 1.8% 72.1% 26.0% [libx264 @ 0x16c3000] mb P I16..4: 0.4% 2.4% 0.3% P16..4: 48.3% 19.6% 19.3% 0.0% 0.0% skip: 9.5% [libx264 @ 0x16c3000] mb B I16..4: 0.1% 0.2% 0.0% B16..8: 52.6% 6.6% 2.3% direct: 1.4% skip:36.8% L0:48.8% L1:42.5% BI: 8.7% [libx264 @ 0x16c3000] 8x8 transform intra:75.3% inter:55.4% [libx264 @ 0x16c3000] coded y,uvDC,uvAC intra: 77.9% 81.7% 33.1% inter: 24.2% 11.6% 1.1% [libx264 @ 0x16c3000] i16 v,h,dc,p: 25% 16% 44% 14% [libx264 @ 0x16c3000] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 15% 29% 6% 5% 6% 6% 7% 7% [libx264 @ 0x16c3000] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 20% 15% 17% 7% 9% 8% 9% 7% 7% [libx264 @ 0x16c3000] i8c dc,h,v,p: 50% 19% 24% 7% [libx264 @ 0x16c3000] Weighted P-Frames: Y:3.8% UV:1.1% [libx264 @ 0x16c3000] ref P L0: 75.6% 19.1% 4.2% 1.0% 0.1% [libx264 @ 0x16c3000] ref B L0: 98.1% 1.9% 0.0% [libx264 @ 0x16c3000] ref B L1: 98.9% 1.1% [libx264 @ 0x16c3000] kb/s:439.47 FFMPEG Configuration: --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-gpl --enable-postproc --enable-nonfree libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 59.100 / 54. 59.100 libavformat 54. 29.104 / 54. 29.104 libavdevice 54. 2.101 / 54. 2.101 libavfilter 3. 17.100 / 3. 17.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 PROBLEM #1: [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping PROBLEM #2: get_buffer() failed Error while decoding stream #0:0: Invalid argument

    Read the article

  • Kernel upgrade CentOS 5.3 mount: could not find filesystem '/dev/root'

    - by matt
    We have a CentOS 5.3 x64 server that by default runs kernel version 2.6.18-164.11.1 and we are attempting to upgrade the box to 2.6.31.12 The drive is LVM +ext3, and the problem I'm having is when I upgrade the kernel and attempt to boot from it, no matter what version of the kernel I use, I get /dev/root not found towards the end of the boot process, and the kernel panics, and than reboots. I'm installing the kernel exactly as it says in this doc. I've tried it "The centOS way " using make rpm and than installing that. I've updated my mkinitrd. The most interesting part of this problem is that it has been so frustrating that I decided to try and clean install centos on an identical machine without LVM, and the result is EXACTLY the same. After upgrading the kernel, I get /dev/root not found. Does anyone know how to fix this, or what information would be relevant to remedy it? I'm open to try anything at this point. One more interesting thing about this problem is that in the new version of the kernel, during boot it complains that dm-mapper is started twice, than panics right after that. I've tried this with other kernel versions, and the result is the same. What am I missing here? If you need any more files, please just ask. Linux cg 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.31.12-rt20) //NOT WORKING!!!! root (hd0,0) kernel /vmlinuz-2.6.31.12-rt20 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.31.12-rt20.img title CentOS (2.6.18-164.11.1.el5) //WORKING!! root (hd0,0) kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.18-164.11.1.el5.img

    Read the article

  • sendmail on ubuntu (9.10) machine "stopped" sending mail

    - by Doron
    I'm developing on my ubuntu 9.10 machine for the web (php). I'm using it sendmail for sending mails, and while developing on my local machine, I send local mails (to my user 'doron'). Up until a few days ago, I was able to send mails both from php's mail() function, and from the command line using the mail command. I'm using sendmail with mailutils. Since the last few days, it seems like it stopped working. When I try to send mail from the command line, I get the following in my syslog (and mail.info, and mail.log): Mar 3 13:27:58 doron-desktop sendmail[4693]: o23BRwlA004693: from=doron, size=84, class=0, nrcpts=1, msgid=<201003031127.o23BRwlA004693@doron-desktop.>, relay=doron@localhost Mar 3 13:27:58 doron-desktop sm-mta[4694]: o23BRwtQ004694: ruleset=check_rcpt, arg1=<doron@doron-desktop>, relay=localhost [127.0.0.1], reject=553 5.1.8 <doron@doron-desktop>... Domain of sender address doron@doron-desktop does not exist Mar 3 13:27:58 doron-desktop sendmail[4693]: o23BRwlA004693: to=<doron@doron-desktop>, ctladdr=doron (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30084, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.8, stat=User unknown Mar 3 13:27:58 doron-desktop sm-mta[4694]: o23BRwtQ004694: from=<doron@doron-desktop>, size=84, class=0, nrcpts=0, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Trying to telnet locally to port 25 results in the following (same output for doron@doron-desktop): doron@doron-desktop:/var/mail$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 doron-desktop. ESMTP Sendmail 8.14.3/8.14.3/Debian-9ubuntu1; Wed, 3 Mar 2010 13:26:06 +0200; (No UCE/UBE) logging access from: localhost(OK)-localhost [127.0.0.1] helo localhost 250 doron-desktop. Hello localhost [127.0.0.1], pleased to meet you mail from: doron@localhost 250 2.1.0 doron@localhost... Sender ok rcpt to: root@localhost 553 5.1.8 root@localhost... Domain of sender address doron@doron-desktop does not exist However - if I do the same, but use [email protected].1 in the mail from field, I get: 250 2.1.5 root... Recipient ok My /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 doron-desktop doron-desktop. (If I don't have the "doron-desktop." (with the ending dot), the mail command takes a lot of time (around 30 seconds) until it responds, but the results are the same.)

    Read the article

  • What the heck is a OPTIONS method in a IIS 7.5 web Log?

    - by Knox
    I know what a GET and a POST are, but it's almost impossible to Google for the word OPTIONS. Here's what I see (i deleted all the stuff at the end) of each: 11/23/11 0:02:13 10.100.0.14 GET /CUpdate2.cshtml _=1322006533495 11/23/11 0:02:13 10.200.0.10 OPTIONS /AssignmentCount _=1322006576798 11/23/11 0:02:13 10.200.0.10 GET /media/faxSound.wav - 11/23/11 0:02:13 10.200.0.10 GET /Star/StarUpdates _=1322006578729 11/23/11 0:02:13 10.100.0.10 GET /CUpdate2.cshtml _=1322006533268

    Read the article

  • RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

    - by zhallett
    I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

    Read the article

  • Firefox automatically switching to https

    - by Akshat Goel
    I am using firefox 14 and lately, I have been observing this weird problem with my firefox. Everytime I put an address in address bar and hit return, https version of the site opens. This has no problem to me but some of my the sites which do not support https can not be opened without typing full http:// followed by the site . I am not using https enabling extension. No extensions were changed when this problem popped up.

    Read the article

  • downgrade the system

    - by deddihp
    hello, actually i have some business to downgrade the kernel. I downgrade from kernel 2.6.31-14 (ubuntu 9.10) to 2.6.26.8. And then i got the following error in my boot process : warning: unable to find a suitable fs in /proc/mounts, is it mounted ? use --subdomainfs to override what is that mean anyway ? thanks.

    Read the article

  • Latency issues over internet

    - by Stevo
    I have a Media Temple server running http://www.popsapp.com which I am having latency issues with. If I run ab -n 100 -c 10 http://www.popsapp.com/ from my local machine I get very bad stats e.g.: Connection Times (ms) min mean[+/-sd] median max Connect: 179 3375 2185.4 2837 12525 Processing: 0 505 693.3 229 4564 Waiting: 0 50 115.4 0 415 Total: 964 3880 2094.5 3159 12608 Whereas if I run it from a rackspace server I have I get this: Connection Times (ms) min mean[+/-sd] median max Connect: 75 76 3.3 75 84 Processing: 235 339 81.4 315 579 Waiting: 159 249 61.7 234 411 Total: 311 415 82.0 390 663 To me this looks like intermediate network issues, but I wouldn't have thought it could be this bad! Any ideas how I can improve it? Here's the trace route traceroute to www.popsapp.com (216.70.105.183), 64 hops max, 52 byte packets 1 192.168.2.1 (192.168.2.1) 3.738 ms 0.953 ms 1.418 ms 2 host-92-22-112-1.as13285.net (92.22.112.1) 27.409 ms 97.093 ms 78.858 ms 3 host-78-151-225-141.static.as13285.net (78.151.225.141) 61.830 ms 170.484 ms 113.288 ms 4 host-78-151-225-80.static.as13285.net (78.151.225.80) 101.513 ms host-78-151-225-22.static.as13285.net (78.151.225.22) 64.718 ms 47.309 ms 5 xe-11-1-0-rt001.sov.as13285.net (62.24.240.14) 98.381 ms 114.424 ms xe-11-1-0-rt001.the.as13285.net (62.24.240.6) 96.592 ms 6 host-78-144-1-59.as13285.net (78.144.1.59) 36.799 ms host-78-144-1-63.as13285.net (78.144.1.63) 178.426 ms host-78-144-1-61.as13285.net (78.144.1.61) 85.516 ms 7 xe-10-0-0-scr010.thn.as13285.net (78.144.0.224) 88.158 ms host-78-144-0-207.as13285.net (78.144.0.207) 35.132 ms host-78-144-0-153.as13285.net (78.144.0.153) 121.464 ms 8 limelight-pp-thn.as13285.net (78.144.3.6) 46.987 ms limelight-pp-sov.as13285.net (78.144.5.18) 108.025 ms 40.169 ms 9 tge11-1.fr4.lga.llnw.net (69.28.172.149) 109.603 ms ve6.fr4.lon.llnw.net (68.142.88.221) 121.681 ms 38.609 ms 10 tge11-1.fr4.lga.llnw.net (69.28.172.149) 111.981 ms 113.744 ms 111.711 ms 11 tge8-2.fr4.iad.llnw.net (69.28.189.34) 117.102 ms ve5.fr4.iad.llnw.net (69.28.171.214) 184.372 ms 146.178 ms 12 cr02-1-1.iad1.net2ez.com (65.97.48.254) 182.880 ms net2ez.tge2-2.fr4.iad.llnw.net (69.28.156.170) 150.489 ms 121.862 ms 13 65.97.50.26 (65.97.50.26) 184.620 ms cr02-1-1.iad1.net2ez.com (65.97.48.254) 156.136 ms 131.963 ms 14 65.97.50.26 (65.97.50.26) 124.899 ms 126.537 ms 123.322 ms 15 e1.4.as02.iad01.mtsvc.net (70.32.64.246) 134.647 ms 186.307 ms 211.059 ms 16 popsapp.com (216.70.105.183) 118.876 ms 113.189 ms vzx258.mediatemple.net (216.70.104.17) 131.012 ms Looks to me like there is significant delay across the limelight network. This would explain why the traceroute via my rackspace server doesn't suffer from the same delay as they will be using their own trunk.

    Read the article

  • Windows periodically disconnects, reconnects to the network

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

    Read the article

  • Apache2 & .htaccess : Apache ignoring AccessFile

    - by Elyx0
    Hi there here is my server configuration: DEBIAN 32Bits / PHP 5 / Apache Server version: Apache/2.2.3 - Server built: Mar 22 2008 09:29:10 The AccessFiles : grep -ni AccessFileName * apache2.conf:134:AccessFileName .htaccess apache2.conf:667:AccessFileName .httpdoverride All the AllowOverride statements in my apache2/ folder. mods-available/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-available/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit mods-enabled/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-enabled/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit sites-enabled/default:8: AllowOverride All sites-enabled/default:14: AllowOverride All sites-enabled/default:19: AllowOverride All sites-enabled/default:24: AllowOverride All sites-enabled/default:42: AllowOverride All The sites-enabled/default file : 1 <VirtualHost *> 2 ServerAdmin [email protected] 3 ServerName mysite.com 4 ServerAlias mysite.com 5 DocumentRoot /var/www/mysite.com/ 6 <Directory /> 7 Options FollowSymLinks 8 AllowOverride All 9 Order Deny,Allow 10 Deny from all 11 </Directory> 12 <Directory /var/www/mysite.com/> 13 Options Indexes FollowSymLinks MultiViews 14 AllowOverride All 15 Order allow,deny 16 allow from all 17 </Directory> 18 <Directory /var/www/mysite.com/test/> 19 AllowOverride All 20 </Directory> 21 22 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ 23 <Directory "/usr/lib/cgi-bin"> 24 AllowOverride All 25 Options ExecCGI -MultiViews +SymLinksIfOwnerMatch 26 Order allow,deny 27 Allow from all 28 </Directory> 29 30 ErrorLog /var/log/apache2/error.log 31 32 # Possible values include: debug, info, notice, warn, error, crit, 33 # alert, emerg. 34 LogLevel warn 35 36 CustomLog /var/log/apache2/access.log combined 37 ServerSignature Off 38 39 Alias /doc/ "/usr/share/doc/" 40 <Directory "/usr/share/doc/"> 41 Options Indexes MultiViews FollowSymLinks 42 AllowOverride All 43 Order deny,allow 44 Deny from all 45 Allow from 127.0.0.0/255.0.0.0 ::1/128 46 </Directory> 47 48 49 50 51 52 53 54 </VirtualHost> If i change any Allow from all in Deny from all , it works whenever i put it. I've got one .htaccess at /mysite.com/.htaccess & one at /mysite.com/test/.htaccess with: Order Deny,Allow Deny from all Neither of them work i can still see my website. I've got mod_rewrite enabled but i don't think it does anything here. I've tried almost everything :/ It works on my local environnement (MAMP) but fails when on my Debian server.

    Read the article

  • What is the RSA SecurID packet format?

    - by bmatthews68
    I am testing a client application that authenticates using RSA SecurID hardware tokens. The authentication is failing and I am not finding any useful information in the log files. I am using Authentication Manager 8.0 and the Java SDK. I have a traffic capture which I would like to analyze with Wireshark to and from port 5500 on the authentication agent. But I can't find the packet format searching the internet or on the the RSA SecurCare knowledge base. Can anybody direct me to the packet format? Here is an extract from the rsa_api_debug.log file which dumps the UDP payload of the request and the response: [2013-11-06 15:11:08,602] main - b.a():? - Sending 508 bytes to 192.168.10.121; contents: 5c 5 0 3 3 5 0 0 2 0 0 0 0 0 1 ea 71 ee 50 6e 45 83 95 8 39 4 72 e 55 cf cc 62 6d d5 a4 10 79 89 13 d5 23 6a c1 ab 33 8 c3 a1 91 92 93 4f 1e 4 8d 2a 22 2c d0 c3 7 fc 96 5f ba bf 0 80 60 60 9d 1d 9c b9 f3 58 4b 43 18 5f e0 6d 5e f5 f4 5d df bf 41 b9 9 ae 46 a0 a9 66 2d c7 6 f6 d7 66 f1 4 f8 ad 8a 9f 4d 7e e5 9c 45 67 16 15 33 70 f0 1 d5 c0 38 39 f5 fd 5e 15 4f e3 fe ea 70 fa 30 c9 e0 18 ab 64 a9 fe 2c 89 78 a2 96 b6 76 3e 2e a2 ae 2e e0 69 80 8d 51 9 56 80 f4 1a 73 9a 70 f3 e7 c1 49 49 c3 41 3 c6 ce 3e a8 68 71 3f 2 b2 9b 27 8e 63 ce 59 38 64 d1 75 b7 b7 1f 62 eb 4d 1d de c7 21 e0 67 85 b e6 c3 80 0 60 54 47 e ef 3 f9 33 7b 78 e2 3e db e4 8e 76 73 45 3 38 34 1e dd 43 3e 72 a7 37 72 5 34 8e f4 ba 9d 71 6c e 45 49 fa 92 a f6 b bf 5 b 4f dc bd 19 0 7e d2 ef 94 d 3b 78 17 37 d9 ae 19 3a 7e 46 7d ea e4 3a 8c e1 e5 9 50 a2 eb df f2 57 97 bc f2 c3 a7 6f 19 7f 2c 1a 3f 94 25 19 4b b2 37 ed ce 97 f ae f ec c9 f5 be f0 8f 72 1c 34 84 1b 11 25 dd 44 8b 99 75 a4 77 3d e1 1d 26 41 58 55 5f d5 27 82 c d3 2a f8 4 aa 8d 5e e4 79 0 49 43 59 27 5e 15 87 a f4 c4 57 b6 e1 f8 79 3b d3 20 69 5e d0 80 6a 6b 9f 43 79 84 94 d0 77 b6 fc f 3 22 ca b9 35 c0 e8 7b e9 25 26 7f c9 fb e4 a7 fc bb b7 75 ac 7b bc f4 bb 4f a8 80 9b 73 da 3 94 da 87 e7 94 4c 80 b3 f1 2e 5b d8 2 65 25 bb 92 f4 92 e3 de 8 ee 2 30 df 84 a4 69 a6 a1 d0 9c e7 8e f 8 71 4b d0 1c 14 ac 7c c6 e3 2a 2e 2a c2 32 bc 21 c4 2f 4d df 9a f3 10 3e e5 c5 7f ad e4 fb ae 99 bf 58 0 20 0 0 0 0 0 0 0 0 0 0 [2013-11-06 15:11:08,602] main - b.b():? - Enterring getResponse [2013-11-06 15:11:08,618] main - b.a():? - Enterring getTimeoutValue(AceRequest AceAuthV4Request[AbstractAceRequest[ hdr=AcePacketHeader[Type=92 Ver=5 AppID=3 Enc=ENCRYPT Hi-Proto=5 Opt=0 CirID=0] created=1383750668571 trailer=AcePackeTrailer[nonce=39e7a607b517c4dd crc=722833884]] user=bmatthews node-sec-req=0 wpcodes=null resp-mac=0 m-resp-mac=0 client=192.168.10.3 passcode==ZTmY|? sec-sgmt=AceSecondarySegments[ cnt=3] response=none]) [2013-11-06 15:11:08,618] main - b.a():? - acm base timeout: 5 [2013-11-06 15:11:08,618] main - b.b():? - Timeout is 5000 [2013-11-06 15:11:08,618] main - b.b():? - Current retries: 0 [2013-11-06 15:11:10,618] main - b.b():? - Received 508 bytes from 192.168.10.121; contents: 6c 5 0 3 3 6 0 0 0 0 0 1 4d 18 55 ca 18 df 84 49 70 ee 24 4a a5 c3 1c 4e 36 d8 51 ad c7 ef 49 89 6e 2e 23 b4 7e 49 73 4 15 d f4 d5 c0 bf fc 72 5b be d1 62 be e0 de 23 56 bf 26 36 7f b f0 ba 42 61 9b 6f 4b 96 88 9c e9 86 df c6 82 e5 4c 36 ee dc 1e d8 a1 0 71 65 89 dc ca ee 87 ae d6 60 c 86 1c e8 ef 9f d9 b9 4c ed 7 55 77 f3 fc 92 61 f9 32 70 6f 32 67 4d fc 17 4e 7b eb c3 c7 8c 64 3f d0 d0 c7 86 ad 4e 21 41 a2 80 dd 35 ba 31 51 e2 a0 ef df 82 52 d0 a8 43 cb 7c 51 c 85 4 c5 b2 ec 8f db e1 21 90 f5 d7 1b d7 14 ca c0 40 c5 41 4e 92 ee 3 ec 57 7 10 45 f3 54 d7 e4 e6 6e 79 89 9a 21 70 7a 3f 20 ab af 68 34 21 b7 1b 25 e1 ab d 9f cd 25 58 5a 59 b1 b8 98 58 2f 79 aa 8a 69 b9 4c c1 7d 36 28 a3 23 f5 cc 2b ab 9e f a1 79 ab 90 fd 5f 76 9f d9 86 d1 fc 4c 7a 4 24 6d de 64 f1 53 22 b0 b7 91 9a 7c a2 67 2a 35 68 83 74 6a 21 ac eb f8 a2 29 53 21 2f 5a 42 d6 26 b8 f6 7f 79 96 5 3b c2 15 3a b d0 46 42 b7 74 4e 1f 6a ad f5 73 70 46 d3 f8 e a3 83 a3 15 29 6e 68 2 df 56 5c 88 8d 6c 2f ab 11 f1 5 73 58 ec 4 5f 80 e3 ca 56 ce 8 b9 73 7c 79 fc 3 ff f1 40 97 bb e3 fb 35 d1 8d ba 23 fc 2d 27 5b f7 be 15 de 72 30 b e d6 5c 98 e8 44 bd ed a4 3d 87 b8 9b 35 e9 64 80 9a 2a 3c a2 cf 3e 39 cb f6 a2 f4 46 c7 92 99 bc f7 4a de 7e 79 9d 9b d9 34 7f df 27 62 4f 5b ef 3a 4c 8d 2e 66 11 f7 8 c3 84 6e 57 ba 2a 76 59 58 78 41 18 66 76 fd 9d cb a2 14 49 e1 59 4a 6e f5 c3 94 ae 1a ba 51 fc 29 54 ba 6c 95 57 6b 20 87 cc b8 dc 5f 48 72 9c c0 2c dd 60 56 4e 4c 6c 1d 40 bd 4 a1 10 4e a4 b1 87 83 dd 1c f2 df 4c [2013-11-06 15:11:10,618] main - a.a():? - Response status is: 1 [2013-11-06 15:11:10,618] main - a.a():? - Authenticaton failed for bmatthews ! [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown invoked [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown successful

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >