Search Results

Search found 4067 results on 163 pages for 'dukes choice award'.

Page 149/163 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Why do some questions get closed for no reason? [closed]

    - by IVlad
    Recently there was a question asking about generating all subsets of a set using a stack and a queue, which was closed (and now deleted it seems) as not a real question for no good reason, since it didn't fit into any of these conditions: It's difficult to tell what is being asked here. No, it was clear what was being asked. This question is ambiguous, vague, incomplete, or rhetorical and cannot be reasonably answered in its current form. Not ambiguous, not vague, not incomplete, definitely not rhetorical and could easily be answered if one knew the solution. Now, the exact same thing has happened with this question: http://stackoverflow.com/questions/2791982/a-shortest-path-problem-with-superheroes-and-intergalactic-journeys/2793746#2793746 I am interested in hearing a logical argument for why that question is either ambiguous, vague, incomplete, rhetorical or cannot reasonably be answered in its current form. It seems that (the same bunch of) people like to close questions that they think are homework questions, especially when they think people want to be served the solution on a platter, which is also not the case: Any suggestions or ideas of how this problem might be solved would be most welcomed. Most of the time the people asking these questions are very reasonable and appreciate even the most vague idea, yet their question is closed. Let's go further and assume that it IS a homework problem. So what? When I registered here I didn't see any rule that said not to post homework problems, nor do I see such a rule now. What is wrong with posting homework problems that makes people hunt them down with a passion to close them without even reading the entire question body? This site is full of questions asked by people who get paid to know the things they are asking, yet their questions are considered fine. How is solving someone's homework problem worse? In some places (like where I live), computer science is a mandatory high school subject, and not everyone is interested in it. How is helping at least those people worse than doing someone's JOB? Not answering homework questions is fine and it's everyone's choice, but I consider closing them to be an act of power abuse, selfishness, and an insult to the fellow community members who are also interested in a solution or want feedback on their proposed solution. So my questions are: - Why do questions like the above get closed for reasons that do not apply? Why do you close them? Why don't you? - Why doesn't a vote to reopen a question reopen it automatically? Needing 5 votes for a reopen takes too long, and it's not fair because one reopen vote basically cancels out a close vote, making it 4 close votes (or 5 to 1, which is the same as only 4 people wanting to close the question), which isn't enough to close the question. I think a question should only be closed when CloseVotes - ReopenVotes >= 5. I'm hoping this will stay up, but I realize it probably won't. In either case, I think this is worth saying and discussing, since it IS community-related.

    Read the article

  • How can I read/write data from a file?

    - by samy
    I'm writing a simple chrome extension. I need to create the ability to add sites URLs to a list, or read from the list. I use the list to open the sites in the new tabs. I'm looking for a way to have a data file I can write to, and read from. I was thinking on XML. I read there is a problem changing the content of files with Javascript. Is XML the right choice for this kinda thing? I should add that there is no web server, and the app will run locally, so maybe the problem websites are having are not same as this. Before I wrote this question, I tried one thing, and started to feel insecure because it didn't work. I made a XML file called Site.xml: <?xml version="1.0" encoding="utf-8" ?> <Sites> <site> <url> http://www.sulamacademy.com/AddMsgForum.asp?FType=273171&SBLang=0&WSUAccess=0&LocSBID=20375 </url> </site> <site> <url> http://www.wow.co.il </url> </site> <site> <url> http://www.Google.co.il </url> </site> I made this script to read the data from him, and put in on the html file. function LoadXML() { var ajaxObj = new XMLHttpRequest(); ajaxObj.open('GET', 'Sites.xml', false); ajaxObj.send(); var myXML = ajaxObj.responseXML; document.write('<table border="2">'); var prs = myXML.getElementsByTagName("site"); for (i = 0; i < prs.length; i++) { document.write("<tr><td>"); document.write(prs[i].getElementsByName("url")[0].childNode[0].nodeValue); document.write("</td></tr>"); } document.write("</table"); }

    Read the article

  • How do you set the ZIndex on a TabItem?

    - by CC Inc
    I am wanting my TabItems to be positioned in between a border to achieve a "binder" affect, like this: However, I cannot seem to achieve this affect using ZIndex with my borders and each TabItem item. Currently, I get this result: Using this code: <Border CornerRadius="40,40,0,0" Background="Orange" Margin="8,31,2,21" Grid.RowSpan="4" Panel.ZIndex="-3" ></Border> <Border CornerRadius="40,40,0,0" Background="Red" Margin="6,29,4,23" Grid.RowSpan="4" Panel.ZIndex="-1"></Border> <Border CornerRadius="40,40,0,0" Background="Yellow" Margin="3,26,7,26" Grid.RowSpan="4" Panel.ZIndex="1"></Border> <Border CornerRadius="40,40,0,0" Background="DarkRed" Margin="1,23,9,29" Grid.RowSpan="4" Panel.ZIndex="3"></Border> <Border CornerRadius="40,40,0,0" Background="OrangeRed" Margin="-2,19,12,33" Grid.RowSpan="4" Name="border1" Panel.ZIndex="5"></Border> <TabControl Name="tabControl1" TabStripPlacement="Bottom" Background="Transparent" Margin="-2,32,15,6" Grid.RowSpan="4" BorderThickness="0"> <TabItem Name="tabItem1" Margin="0,0,0,1" Panel.ZIndex="4"> <TabItem.Header> <TextBlock> Main</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem2" Panel.ZIndex="5"> <TabItem.Header> <TextBlock Height="13" Width="91"> Internet Explorer</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem3" Panel.ZIndex="0"> <TabItem.Header> <TextBlock> Firefox</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem4" Panel.ZIndex="-2"> <TabItem.Header> <TextBlock> Chrome</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem5" Panel.ZIndex="-4"> <TabItem.Header> <TextBlock> Opera</TextBlock> </TabItem.Header> </TabItem> </TabControl> However, this does not achieve the desired affect. How can I do this in WPF? Is TabControl the best choice?

    Read the article

  • CSS - changing the font color for a from select option in firefox

    - by Mick
    I'm building a website for my church, and I'm teaching myself all about web design along the way. http://www.wilmingtonchurchofgod.org/contact_us.html is the link where you can see my issue. If you look at that page in firefox, and you click the select part of the form (next to, "Who would you like to contact?") you will see that when you hover over a choice, the font is white. I have tried various things to fix this, but can't find a solution. This seems to be specific to Firefox. Here is the relevant CSS. input, textarea, select, option{ padding: 6px; border: solid 1px #E5E5E5; outline: 0; font: normal 13px/100% Verdana, Tahoma, sans-serif; width: 200px; background: #FFFFFF url(images/from-grad.jpg) left top repeat-x; background: -webkit-gradient(linear, left top, left 25, from(#FFFFFF), color-stop(4%, #EEEEEE), to(#FFFFFF)); background: -moz-linear-gradient(top, #FFFFFF, #EEEEEE 1px, #FFFFFF 25px); box-shadow: rgba(0,0,0, 0.15) 0px 0px 8px; -moz-box-shadow: rgba(0,0,0, 0.15) 0px 0px 8px; -webkit-box-shadow: rgba(0,0,0, 0.15) 0px 0px 8px; } option{ padding:0px; } textarea { width: 400px; max-width: 400px; height: 150px; line-height: 150%; } input:hover, textarea:hover, input:focus, textarea:focus{ border-color: #C9C9C9; -webkit-box-shadow: rgba(0, 0, 0, 0.15) 0px 0px 8px; -moz-box-shadow: rgba(0,0,0, 0.15) 0px 0px 8px; } option:hover, option:focus, select:hover, select:focus { color: black; border-color: #C9C9C9; -webkit-box-shadow: rgba(0, 0, 0, 0.15) 0px 0px 8px; -moz-box-shadow: rgba(0,0,0, 0.15) 0px 0px 8px; } Another side note is that I can't get any background gradient at all to show up on Google Chome (yet it does on Safari and they are supposed to use the same kit?) Any help with these two things would be greatly appreciated.

    Read the article

  • How do display checked value in checkbox on Google plus style popup box?

    - by user946742
    After reading this post on Stackoverflow Google plus popup box when hovering over thumbnail? I was inspirted to add it on my site. I managed to do so and the script adds the contacts to my database. So far awesome! However, my problem (and also appears in the example) is it does not display the "checked" value... so the user will never know if they already added them to their list or not. Is the correct way to display checked values with PHP? Here is my html code: <ul style="list-style: none;padding:2px;"> <li style="padding:5px 2px;"> <input type="checkbox" id="Friends" name="circles" value="Friends" '.$checked1.'/> Friends </li> <li style="padding:5px 2px;"> <input type="checkbox" id="Following" name="circles" value="Following" '.$checked2.'/>Following </li> <li style="padding:5px 2px;"> <input type="checkbox" id="Family" name="circles" value="Family" '.$checked3.'/> Family </li> <li style="padding:5px 2px;"> <input type="checkbox" id="Acquaintances" name="circles" value="Acquaintances" '.$checked4.'/> Acquaintances </li> </ul> And my PHP code is: if($circle_check_friends>0) { $ckecked1='checked=""'; } else if ($circle_check_following>0) { $ckecked2='checked=""'; } else if ($circle_check_family>0) { $ckecked3='checked=""'; } else if ($circle_check_acquaintances>0) { $ckecked4='checked=""'; } else if ($circle_check_friends=0) { $ckecked1=''; } else if ($circle_check_following=0) { $ckecked2=''; } else if ($circle_check_family=0) { $ckecked3=''; } else if ($circle_check_acquaintances=0) { $ckecked4=''; } Im lost because this is not giving me the result I want... i.e. for the checked values to be displayed according to the users choice. Your help is highly appreciated Thank you all in advance George

    Read the article

  • Error Handling for Application in PHP

    - by Zubair1
    I was wondering if someone can show me a good way to handle errors in my PHP app, that i am also easily able to reuse in my codes. So far i have been using the following functions: Inline Errors function display_errors_for($fieldname) { global $errors; if (isset($errors[$fieldname])) { return '<label for="' .$fieldname. '" class="error">' . ucfirst($errors[$fieldname]). '</label>'; } else { return false; } } All Errrors function display_all_errors($showCounter = true) { global $errors; $counter = 0; foreach ($errors as $errorFieldName => $errorText) { if ($showCounter == true) { $counter++; echo '<li>' . $counter . ' - <label for="' .$errorFieldName. '">' .$errorText. '</label></li>'; } else { echo '<li><label for="' .$errorFieldName. '">' .$errorText. '</label></li>'; } } } I have a $errors = array(); defined on the top of my global file, so it is appended to all files. The way i use it is that if i encounter an error, i push a new error key/value to the $errors array holder, something like the following: if (strlen($username) < 3) { $errors['username'] = "usernames cannot be less then 3 characters."; } This all works great and all, But i wondering if some one has a better approach for this? with classes? i don't think i want to use Exceptions with try/catch seems like an overkill to me. I'm planning to make a new app, and i'll be getting my hands wet with OOP alot, though i have already made apps using OOP but this time i'm planning to go even deeper and use OOP approach more extensively. What i have in mind is something like this, though its just a basic class i will add further detail to it as i go deeper and deeper in my app to see what it needs. class Errors { public $errors = array(); public function __construct() { // Initialize Default Values // Initialize Methods } public function __destruct() { //nothing here too... } public function add($errorField, $errorDesc) { if (!is_string($errorField)) return false; if (!is_string($errorDesc)) return false; $this->errors[$errorField] = $errorDesc; } public function display($errorsArray) { // code to iterate through the array and display all errors. } } Please share your thoughts, if this is a good way to make a reusable class to store and display errors for an entire app, or is getting more familiar with exceptions and try/catch my only choice?

    Read the article

  • DCVS + hosting for a startup commercial multiplatform phone app

    - by AG
    I'm in lean startup mode, working on a simple phone app that will be published initially as a iThingy app and an Android app with, possibly, Blackberry and Symbian versions to follow. I'm about to go from no repository to needing a central repository that up to 4 very part-time resources will be sharing. Two of us have no version control background, one has used Subversion, and I've used most of the major centralized VCS systems. I'm not going to be pushing the technical limitations of any VCS for a long time; I'm sure that any of the major systems would work fine. And the hosting accounts I've looked at seem reasonable. So I'm really focussed on minimizing the downside risks. That is, I'd like to find a stable setup that is easy to learn in general, easy to use from Windows/Eclipse, and won't paint me into any obvious corners for the next 12 months or so. A quick search of the web had led me to consider the following pairs of DVCS and hosting service, with what I think I'm hearing as their strengths and weaknesses (for my purposes): Bazaar/Launchpad -- My initial choice since I need to get more familiar with this pair for the Google Summer of Code mentoring I'm doing. But, whatever the technical merits, a non-starter for me because they are purely open source, no private repositories plans to purchase that I can see. Git/GitHub -- Git: Fast, light, ultimately flexible, but relatively less Windows friendly, Eclipse plugin (eGit) available but relatively young, GitHub: widely used, pricing is fine Mercurial/BitBucket -- Mercurial: a little less flexible, a little more Windows friendly, Eclipse plugin seems a bit more mature, BitBucket: widely used, pricing is fine, includes a wiki and an issue tracker that we might be able to use instead of something like BaseCamp, at least for a while. Mercurial/BitBucket seem like the winning pair so far for my particular situation; at least two of us are definitely going to be working mostly from Eclipse on Windows and reducing my own learning curve is a priority. ;-) But I have two specific questions: 1) Am I wrong about Bazaar/Launchpad and is there a viable, secure way to use them for proprietary code? 2) Any reason to think that the Mecurial/Bitbucket pair will end up being a headache for my Mac developer, soon, or for Blackberry or Symbian developers a little later? ag

    Read the article

  • Audio/video streaming on Windows platform

    - by bushtucker
    I'm building an interactive language learning application to be used in a classroom environment. The idea is that a teacher should be able to talk to the students (=audio stream to all students), let students talk to each other (= audio P2P) in groups of two or more, let students watch a video coming from a the DVD player or coming from a media server. It should be possible to save the audio/video streams. The teacher should also be able to monitor, take-over or block the desktop of the students. The platform is Windows and it's a desktop application, no web application. The audio delay should be as minimal as poosible. Optionally a student sitting at home should be supported, but it's not a high priority. I am now finished with the classroom control part of the application (login, monitor, block, ...) and want to start the audio and video part. I've been evaluating several options like DirectX, GStreamer and SIP but now I have to make a decision. DirectX seems an obvious choice for the Windows platform, but it only lets me capture and playback audio and video. The encoding/decoding/network part I should do myself. GStreamer contains all kinds of options to capture/encode/stream/save audio and video streams. I've experimented a bit with it (ossbuild) and it does seem to involve a lot of trial and error to make something work: - microphone capture (via directsoundsrc) produces cracking noises on some computers - rtpL16 payloader didn't work well - streaming raw audio over the network only working at a sampling rate of 8000, no higher - there are a lot of errors when receiving mpeg4 video (bad I-frame), on some computers worse than others It is my impression that gstreamer is primary targetted at linux platforms. Development and support for the Windows platform seems to be a little behind. Nevertheless it's a powerful framework that could save me months and years of work. SIP seems to be able to do everything I want, but it is targeted towards telephony and IM. I don't know how flexible SIP is. It seems to me that the SIP layer would just be overhead as I already have a central (teacher) application that can control and setup all the streams. The interesting parts of frameworks like opalvoip and freeswitch are the actual audio/video capture, the encoding and transmission. Does anyone know how these interesting parts relate a framework like gstreamer? Are they easy to integrate into a custom application? Are they flexible enough? Does anyone have experience with all or one of these technologies? Maybe there are even other options I can look at? Many thanks for your advice

    Read the article

  • Should I add try/catch around when casting on an attribute of JSP implicit object?

    - by Michael Mao
    Hi all: Basically what I mean is like this: List<String[]> routes = (List<String[]>)application.getAttribute("routes"); For the above code, it tries to get an attribute named "routes" from the JSP implicit object - application. But as everyone knows, after this line of code, routes may very well contains a null - which means this application hasn't got an attribute named "routes". Is this "casting on null" good programming practice in Java or not? Basically I try to avoid exceptions such as java.io.InvalidCastException I reckon things like this are more as "heritage" of Java 1.4 when generic types were not introduced to this language. So I guess everything stored in application attributes as Objects (Similar to traditional ArrayList). And when you do "downcast", there might be invalid casts. What would you do in this case? Update: Just found that although in the implicit object application I did store a List of String arrays, when I do this : List<double[]> routes = (List<double[]>)application.getAttribute("routes"); It doesn't produce any error... And I felt not comfortable already... And even with this code: out.print(routes.get(0)); It does print out something strange : [Ljava.lang.String;@18b352f Am I printing a "pointer to String"? I can finally get an exception like this: out.print(routes.get(0)[1]); with error : java.lang.ClassCastException: [Ljava.lang.String; Because it was me to add the application attribute, I know which type should it be cast to. I feel this is not "good enough", what if I forget the exact type? I know there are still some cases where this sort of thing would happen, such as in JSP/Servlet when you do casting on session attributes. Is there a better way to do this? Before you say:"OMG, why you don't use Servlets???", I should justify my reason as this: - because my uni sucks, its server can only work with Servlets generated by JSP, and I don't really want to learn how to fix issues like that. look at my previous question on this , and this is uni homework, so I've got no other choice, forget all about war, WEB-INF,etc, but "code everything directly into JSP" - because the professors do that too. :)

    Read the article

  • Python/Biomolecular Physics- Trying to code a simple stochastic simulation of a system exhibiting co

    - by user359597
    *edited 6/17/10 I'm trying to understand how to improve my code (make it more pythonic). Also, I'm interested in writing more intuitive 'conditionals' that would describe scenarios that are commonplace in biochemistry. The conditional criteria in the below program is explained in Answer #2, but I am not satisfied with it- it is correct, but isn't obvious and isn't easy to implement for more complicated conditional scenarios. Ideas welcome. Comments/criticisms welcome. First posting experience @ stackoverflow- please comment on etiquette if needed. The code generates a list of values that are the solution to the following exercise: "In a programming language of your choice, implement Gillespie’s First Reaction Algorithm to study the temporal behaviour of the reaction A---B in which the transition from A to B can only take place if another compound, C, is present, and where C dynamically interconverts with D, as modelled in the Petri-net below. Assume that there are 100 molecules of A, 1 of C, and no B or D present at the start of the reaction. Set kAB to 0.1 s-1 and both kCD and kDC to 1.0 s-1. Simulate the behaviour of the system over 100 s." def sim(): # Set the rate constants for all transitions kAB = 0.1 kCD = 1.0 kDC = 1.0 # Set up the initial state A = 100 B = 0 C = 1 D = 0 # Set the start and end times t = 0.0 tEnd = 100.0 print "Time\t", "Transition\t", "A\t", "B\t", "C\t", "D" # Compute the first interval transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) # Loop until the end time is exceded or no transition can fire any more while t <= tEnd and transition >= 0: print t, '\t', transition, '\t', A, '\t', B, '\t', C, '\t', D t += interval if transition == 0: A -= 1 B += 1 if transition == 1: C -= 1 D += 1 if transition == 2: C += 1 D -= 1 transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) def transitionData(A, B, C, D, kAB, kCD, kDC): """ Returns nTransition, the number of the firing transition (0: A->B, 1: C->D, 2: D->C), and interval, the interval between the time of the previous transition and that of the current one. """ RAB = kAB * A * C RCD = kCD * C RDC = kDC * D dt = [-1.0, -1.0, -1.0] if RAB > 0.0: dt[0] = -math.log(1.0 - random.random())/RAB if RCD > 0.0: dt[1] = -math.log(1.0 - random.random())/RCD if RDC > 0.0: dt[2] = -math.log(1.0 - random.random())/RDC interval = 1e36 transition = -1 for n in range(len(dt)): if dt[n] > 0.0 and dt[n] < interval: interval = dt[n] transition = n return transition, interval if __name__ == '__main__': sim()

    Read the article

  • NSArraycontroller selectionIndexes bindings

    - by Michael Scherbaum
    Hi all, I have the following set-up: A Window that has a splitView in which I display I NSCollectionView in the left view and a detailView in the right view. Both views are set-up in separate xibs. Furthermore I have a Datacontroller (of class NSArrayController) that manages a mutable Array of NSMutableDictionaries (moviesForChoice). The dataController is set-up as application delegate. The movie objects in the array have properties like (name, plot, genre etc.) so far so good... In the xib for the NScollectionview I bound a NSArraycontroller content property to my datacontroller via Application.delegate.moviesForChoice The collectionView accesses the arraycontroller.arrrangedObjects and arraycontroller.selectionIndexes. This works fine the contents are displayed and the selection works fine in the collectionview (my collectionviewItem renders a selection color) In the xib for the detailView I want to display information for the selected object in the collectionview. Therefore I also added an arraycontroller to the xib, bound the content aray to Application.delegate.moviesForChoice and bound the NSTextfields in the view to e.g. arraycontroller.selection.name Here comes my issue: everytime I open the window with the two xibs, my collectionview displays all movies that are for choice correctly, and the detailview displays the information for the 1st object in my collectionview. Whenever I click on a different movie in the collectionView the res. item renders a selection color, but the detailView doesn't update. My understanding of it would be that the DataController is not informed about updates in the selectionIndexes and can therefore not trigger an update in the detailView. Correct me if I'm wrong... To remedy this I tried to bind the selectionIndexes property of the arraycontroller in the collectionView xib to Application.delegate.moviesForChoice.selecionIndexes but this failed with: addObserver:forKeyPath:options:context:] is not supported. Key path: selectionIndexes I could imagine that this means that the datacontroller is not KVO compliant for my Array moviesForChoice, but I implemented the following methods for it: -(void)insertObject:(NSDictionary *)dict inMoviesForChoiceAtIndex:(NSUInteger)index { [moviesForChoice insertObject:dict atIndex:index]; } -(void)removeObjectFromMoviesForChoiceAtIndex:(NSUInteger)index { [moviesForChoice removeObjectAtIndex:index]; } -(void)setMoviesForChoice:(NSMutableArray *)a { moviesForChoice = a; } -(NSArray*)moviesForChoice { return moviesForChoice; } -(NSUInteger)countOfMoviesForChoice { return [moviesForChoice count]; } - (void)addMovieForChoiceObject:(Movie *)anObject { [moviesForChoice addObject:anObject]; } So where am I wrong? How do I correctly bind to the selectionIndexes? You help is much appreciated! M

    Read the article

  • Delphi - Read File To StringList, then delete and write back to file.

    - by Jkraw90
    I'm currently working on a program to generate the hashes of files, in Delphi 2010. As part of this I have a option to create User Presets, e.g. pre-defined choice of hashing algo's which the user can create/save/delete. I have the create and load code working fine. It uses a ComboBox and loads from a file "fhpre.ini", inside this file is the users presets stored in format of:- PresetName PresetCode (a 12 digit string using 0 for don't hash and 1 for do) On application loading it loads the data from this file into the ComboBox and an Array with the ItemIndex of ComboBox matching the corrisponding correct string of 0's and 1's in the Array. Now I need to implement a feature to have the user delete a preset from the list. So far my code is as follows, procedure TForm1.Panel23Click(Sender : TObject); var fil : textfile; contents : TStringList; x,i : integer; filline : ansistring; filestream : TFileStream; begin //Start Procedure //Load data into StringList contents := TStringList.Create; fileStream := TFileStream.Create((GetAppData+'\RFA\fhpre.ini'), fmShareDenyNone); Contents.LoadFromStream(fileStream); fileStream.Destroy(); //Search for relevant Preset i := 0; if ComboBox4.Text <> Contents[i] then begin Repeat i := i + 1; Until ComboBox4.Text = Contents[i]; end; contents.Delete(i); //Delete Relevant Preset Name contents.Delete(i); //Delete Preset Digit String //Write StringList back to file. AssignFile(fil,(GetAppData+'\RFA\fhpre.ini')); ReWrite(fil); for i := 0 to Contents.Count -1 do WriteLn(Contents[i]); CloseFile(fil); Contents.Free; end; However if this is run, I get a 105 error when it gets to the WriteLn section. I'm aware that the code isn't great, for example doesn't have checks for presets with same name, but that will come, I want to get the base code working first then can tweak and add extra checks etc. Any help would be appreciated.

    Read the article

  • Commitment to Zend Framework - any arguments against?

    - by Pekka
    I am refurbishing a big CMS that I have been working on for quite a number of years now. The product itself is great, but some components, the Database and translation classes for example, need urgent replacing - partly self-made as far back as 2002, grown into a bit of a chaos over time, and might have trouble surviving a security audit. So, I've been looking closely at a number of frameworks (or, more exactly, component Libraries, as I do not intend to change the basic structure of the CMS) and ended up with liking Zend Framework the best. They offer a solid MVC model but don't force you into it, and they offer a lot of professional components that have obviously received a lot of attention (Did you know there are multiple plurals in Russian, and you can't translate them using a simple ($number == 0) or ($number > 1) switch? I didn't, but Zend_Translate can handle it. Just to illustrate the level of thorougness the library seems to have been built with.) I am now literally at the point of no return, starting to replace key components of the system by the Zend-made ones. I'm not really having second thoughts - and I am surely not looking to incite a flame war - but before going onward, I would like to step back for a moment and look whether there is anything speaking against tying a big system closely to Zend Framework. What I like about Zend: As far as I can see, very high quality code Extremely well documented, at least regarding introductions to how things work (Haven't had to use detailed API documentation yet) Backed by a company that has an interest in seeing the framework prosper Well received in the community, has a considerable user base Employs coding standards I like Comes with a full set of unit tests Feels to me like the right choice to make - or at least, one of the right choices - in terms of modern, professional PHP development. I have been thinking about encapsulating and abstracting ZF's functionality into own classes to be able to switch frameworks more easily, but have come to the conclusion that this would not be a good idea because: it would be an unnecessary level of abstraction it could cost performance the big advantage of using a framework - the existence of a developer base that is familiar with its components - would partly be cancelled out therefore, the commitment to ZF would be a deep one. Thus my question: Is there anything substantial speaking against committing to the Zend Framework? Do you have insider knowledge of plans of Zend Inc.'s to go evil in 2011, and make it a closed source library? Is Zend Inc. run by vampires? Are there conceptual flaws in the code base you start to notice when you've transitioned all your projects to it? Is the appearance of quality code an illusion? Does the code look good, but run terribly slow on anything below my quad-core workstation?

    Read the article

  • I'm searching for a messaging platform (like XMPP) that allows tight integration with a web applicat

    - by loxs
    Hi, At the company I work for, we are building a cluster of web applications for collaboration. Things like accounting, billing, CRM etc. We are using a RESTfull technique: For database we use CouchDB Different applications communicate with one another and with the database via http. Besides, we have a single sign on solution, so that when you login in one application, you are automatically logged to the other. For all apps we use Python (Pylons). Now we need to add instant messaging to the stack. We need to support both web and desktop clients. But just being able to chat is not enough. We need to be able to achieve all of the following (and more similar things). When somebody gets assigned to a task, they must receive a message. I guess this is possible with some system daemon. There must be an option to automatically group people in groups by lots of different properties. For example, there must be groups divided both by geographical location, by company division, by job type (all the programers from different cities and different company divisions must form a group), so that one can send mass messages to a group of choice. Rooms should be automatically created and destroyed. For example when several people visit the same invoice, a room for them must be automatically created (and they must auto-join). And when all leave the invoice, the room must be destroyed. Authentication and authorization from our applications. I can implement this using custom solutions like hookbox http://hookbox.org/docs/intro.html but then I'll have lots of problems in supporting desktop clients. I have no former experience with instant messaging. I've been reading about this lately. I've been looking mostly at things like ejabberd. But it has been a hard time and I can't find whether what I want is possible at all. So I'd be happy if people with experience in this field could help me with some advice, articles, tales of what is possible etc.

    Read the article

  • All possible combinations of length 8 in a 2d array

    - by CodeJunki
    Hi, I've been trying to solve a problem in combinations. I have a matrix 6X6 i'm trying to find all combinations of length 8 in the matrix. I have to move from neighbor to neighbor form each row,column position and i wrote a recursive program which generates the combination but the problem is it generates a lot of duplicates as well and hence is inefficient. I would like to know how could i eliminate calculating duplicates and save time. int a={{1,2,3,4,5,6}, {8,9,1,2,3,4}, {5,6,7,8,9,1}, {2,3,4,5,6,7}, {8,9,1,2,3,4}, {5,6,7,8,9,1}, } void genSeq(int row,int col,int length,int combi) { if(length==8) { printf("%d\n",combi); return; } combi = (combi * 10) + a[row][col]; if((row-1)>=0) genSeq(row-1,col,length+1,combi); if((col-1)>=0) genSeq(row,col-1,length+1,combi); if((row+1)<6) genSeq(row+1,col,length+1,combi); if((col+1)<6) genSeq(row,col+1,length+1,combi); if((row+1)<6&&(col+1)<6) genSeq(row+1,col+1,length+1,combi); if((row-1)>=0&&(col+1)<6) genSeq(row-1,col+1,length+1,combi); if((row+1)<6&&(row-1)>=0) genSeq(row+1,col-1,length+1,combi); if((row-1)>=0&&(col-1)>=0) genSeq(row-1,col-1,length+1,combi); } I was also thinking of writing a dynamic program basically recursion with memorization. Is it a better choice?? if yes than I'm not clear how to implement it in recursion. Have i really hit a dead end with approach??? Thankyou Edit Eg result 12121212,12121218,12121219,12121211,12121213. the restrictions are that you have to move to your neighbor from any point, you have to start for each position in the matrix i.e each row,col. you can move one step at a time, i.e right, left, up, down and the both diagonal positions. Check the if conditions. i.e if your in (0,0) you can move to either (1,0) or (1,1) or (0,1) i.e three neighbors. if your in (2,2) you can move to eight neighbors. so on...

    Read the article

  • objective C convert NSString to unsigned

    - by user1501354
    I have changed my question. I want to convert an NSString to an unsigned int. Why? Because I want to do parallel payment in PayPal. Below I have given my coding in which I want to convert the NSString to an unsigned int. My query is: //optional, set shippingEnabled to TRUE if you want to display shipping //options to the user, default: TRUE [PayPal getPayPalInst].shippingEnabled = TRUE; //optional, set dynamicAmountUpdateEnabled to TRUE if you want to compute //shipping and tax based on the user's address choice, default: FALSE [PayPal getPayPalInst].dynamicAmountUpdateEnabled = TRUE; //optional, choose who pays the fee, default: FEEPAYER_EACHRECEIVER [PayPal getPayPalInst].feePayer = FEEPAYER_EACHRECEIVER; //for a payment with multiple recipients, use a PayPalAdvancedPayment object PayPalAdvancedPayment *payment = [[PayPalAdvancedPayment alloc] init]; payment.paymentCurrency = @"USD"; // A payment note applied to all recipients. payment.memo = @"A Note applied to all recipients"; //receiverPaymentDetails is a list of PPReceiverPaymentDetails objects payment.receiverPaymentDetails = [NSMutableArray array]; NSArray *emailArray = [NSArray arrayWithObjects:@"[email protected]",@"[email protected]", nil]; for (int i = 1; i <= 2; i++) { PayPalReceiverPaymentDetails *details = [[PayPalReceiverPaymentDetails alloc] init]; // Customize the payment notes for one of the three recipient. if (i == 2) { details.description = [NSString stringWithFormat:@"Component %d", i]; } details.recipient = [NSString stringWithFormat:@"%@",[emailArray objectAtIndex:i-1]]; unsigned order; if (i==1) { order = [[feeArray objectAtIndex:0] unsignedIntValue]; } if (i==2) { order = [[amountArray objectAtIndex:0] unsignedIntValue]; } //subtotal of all items for this recipient, without tax and shipping details.subTotal = [NSDecimalNumber decimalNumberWithMantissa:order exponent:-4 isNegative:FALSE]; //invoiceData is a PayPalInvoiceData object which contains tax, shipping, and a list of PayPalInvoiceItem objects details.invoiceData = [[PayPalInvoiceData alloc] init]; //invoiceItems is a list of PayPalInvoiceItem objects //NOTE: sum of totalPrice for all items must equal details.subTotal //NOTE: example only shows a single item, but you can have more than one details.invoiceData.invoiceItems = [NSMutableArray array]; PayPalInvoiceItem *item = [[PayPalInvoiceItem alloc] init]; item.totalPrice = details.subTotal; [details.invoiceData.invoiceItems addObject:item]; [payment.receiverPaymentDetails addObject:details]; } [[PayPal getPayPalInst] advancedCheckoutWithPayment:payment]; Can anybody tell me how to do this conversion? Thanks and regards in advance.

    Read the article

  • Should I create a unique clustered index, or non-unique clustered index on this SQL 2005 table?

    - by Bremer
    I have a table storing millions of rows. It looks something like this: Table_Docs ID, Bigint (Identity col) OutputFileID, int Sequence, int …(many other fields) We find ourselves in a situation where the developer who designed it made the OutputFileID the clustered index. It is not unique. There can be thousands of records with this ID. It has no benefit to any processes using this table, so we plan to remove it. The question, is what to change it to… I have two candidates, the ID identity column is a natural choice. However, we have a process which does a lot of update commands on this table, and it uses the Sequence to do so. The Sequence is non-unique. Most records only contain one, but about 20% can have two or more records with the same Sequence. The INSERT app is a VB6 piece of crud throwing thousands insert commands at the table. The Inserted values are never in any particular order. So the Sequence of one insert may be 12345, and the next could be 12245. I know that this could cause SQL to move a lot of data to keep the clustered index in order. However, the Sequence of the inserts are generally close to being in order. All inserts would take place at the end of the clustered table. Eg: I have 5 million records with Sequence spanning 1 to 5 million. The INSERT app will be inserting sequence’s at the end of that range at any given time. Reordering of the data should be minimal (tens of thousands of records at most). Now, the UPDATE app is our .NET star. It does all UPDATES on the Sequence column. “Update Table_Docs Set Feild1=This, Field2=That…WHERE Sequence =12345” – hundreds of thousands of these a day. The UPDATES are completely and totally, random, touching all points of the table. All other processes are simply doing SELECT’s on this (Web pages). Regular indexes cover those. So my question is, what’s better….a unique clustered index on the ID column, benefiting the INSERT app, or a non-unique clustered index on the Sequence, benefiting the UPDATE app?

    Read the article

  • Dragging Custom Node in JavaFX

    - by Karussell
    I cannot get it working although I am very close to an acceptable solution. I can drag the Dock if it is only a rectangle. But if I add a node (e.g. an image) to this dock I am not able to get a working solution. Do you have a code snippet, link or other advices for me? Here is my code: public class Dock extends CustomNode { // initialize this with an 64x64 image of your choice // via ImageView { image: Image {..}} public var content: Node[]; public var width = 64; public var height = 64; public var xOffset: Number = 0; public var yOffset: Number = 0; var imgX: Number = 0; var imgY: Number = 0; var distX: Number; var distY: Number; public var rasterX = function (n: Number): Number { var MAX = 4 * 64; if (n < 0) { return 0 } else if (n > MAX) { return MAX } else return n } public var rasterY = rasterX; override protected function create(): Node { Group { // if we place the translate here then the whole dock will flicker //translateX: bind imgX; //translateY: bind imgY; content: [ Rectangle { // ... and here 'content' won't be dragged translateX: bind imgX; translateY: bind imgY; height: bind height width: bind width fill: Color.LIGHTGRAY strokeWidth: 4 stroke: Color.BLACK }, content] onMousePressed: function (e: MouseEvent): Void { xOffset = e.x; yOffset = e.y; // Calculate the distance of the mouse point from the image // top-left corner which will always come out as positive value distX = e.x - imgX; distY = e.y - imgY; } onMouseDragged: function (e: MouseEvent): Void { // Find out the new image postion by subtracting the distance // part from the mouse point. imgX = rasterX(e.x - distX); imgY = rasterY(e.y - distY); } } }

    Read the article

  • ZF Autoloader to load ancestor and requested class

    - by Pekka
    I am integrating Zend Framework into an existing application. I want to switch the application over to Zend's autoloading mechanism to replace dozens of include() statements. I have a specific requirement for the autoloading mechanism, though. Allow me to elaborate. The existing application uses a core library (independent from ZF), for example: /Core/Library/authentication.php /Core/Library/translation.php /Core/Library/messages.php this core library is to remain untouched at all times and serves a number of applications. The library contains classes like class ancestor_authentication { ... } class ancestor_translation { ... } class ancestor_messages { ... } in the application, there is also a Library directory: /App/Library/authentication.php /App/Library/translation.php /App/Library/messages.php these includes extend the ancestor classes and are the ones that actually get instantiated in the application. class authentication extends ancestor_authentication { } class translation extends ancestor_translation { } class messages extends ancestor_messages { } usually, these class definitions are empty. They simply extend their ancestors and provide the class name to instantiate. $authentication = new authentication(); The purpose of this solution is to be able to easily customize aspects of the application without having to patch the core libraries. Now, the autoloader I need would have to be aware of this structure. When an object of the class authentication is requested, the autoloader would have to: 1. load /Core/Library/authentication.php 2. load /App/Library/authentication.php My current approach would be creating a custom function, and binding that to Zend_Loader_Autoloader for a specific namespace prefix. Is there already a way to do this in Zend that I am overlooking? The accepted answer in this question kind of implies there is, but that may be just a bad choice of wording. Are there extensions to the Zend Autoloader that do this? Can you - I am new to ZF - think of an elegant way, conforming with the spirit of the framework, of extending the Autoloader with this functionality? I'm not necessary looking for a ready-made implementation, some pointers (This should be an extension to the xyz method that you would call like this...) would already be enough.

    Read the article

  • StaX: Content not allowed in prolog

    - by RalfB
    I have the following (test) XML file below and Java code that uses StaX. I want to apply this code to a file that is about 30 GB large but with fairly small elements, so I thought StaX is a good choice. I am getting the following error: Exception in thread "main" javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(XMLStreamReaderImpl.java:598) at at.tuwien.mucke.util.xml.staxtest.StaXTest.main(StaXTest.java:18) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:120) <?xml version='1.0' encoding='utf-8'?> <catalog> <book id="bk101"> <author>Gambardella, Matthew</author> <title>XML Developer's Guide</title> <price>44.95</price> <description>An in-depth look at creating applications with XML.</description> </book> <book id="bk102"> <author>Ralls, Kim</author> <title>Midnight Rain</title> <price>5.95</price> <description>A former architect battles corporate zombies, an evil sorceress, and her own childhood to become queen of the world.</description> </book> </catalog> Here the code: package xml.staxtest; import java.io.*; import javax.xml.stream.*; public class StaXTest { public static void main(String[] args) throws Exception { XMLInputFactory xif = XMLInputFactory.newInstance(); XMLStreamReader streamReader = xif.createXMLStreamReader(new FileReader("D:/Data/testFile.xml")); while(streamReader.hasNext()){ int eventType = streamReader.next(); if(eventType == XMLStreamReader.START_ELEMENT){ System.out.println(streamReader.getLocalName()); } //... more to come here later ... } } }

    Read the article

  • How do I create a safe local development environment?

    - by docgnome
    I'm currently doing web development with another developer on a centralized development server. In the past this has worked alright, as we have two separate projects we are working on and rarely conflict. Now, however, we are adding a third (possible) developer into the mix. This is clearly going to create problems with other developers changes affecting my work and vice versa. To solve this problem, I'm thinking the best solution would be to create a virtual machine to distribute between the developers for local use. The problem I have is when it comes to the database. Given that we all develop on laptops, simply keeping a local copy of the live data is plain stupid. I've considered sanitizing the data, but I can't really figure out how to replace the real data, with data that would be representative of what people actually enter with out repeating the same information over and over again, e.g. everyone's address becomes 123 Testing Lane, Test Town, WA, 99999 or something. Is this really something to be concerned about? Are there tools to help with this sort of thing? I'm using MySQL. Ideally, if I sanitized the db it should be done from a script that I can run regularly. If I do this I'd also need a way to reduce the size of the db itself. (I figure I could select all the records created after x and whack them and all the records in corresponding tables out so that isn't really a big deal.) The second solution I've thought of is to encrypt the hard drive of the vm, but I'm unsure of how practical this is in terms of speed and also in the event of a lost/stolen laptop. If I do this, should the vm hard drive file itself be encrypted or should it be encrypted in the vm? (I'm assuming the latter as it would be portable and doesn't require the devs to have any sort of encryption capability on their OS of choice.) The third is to create a copy of the database for each developer on our development server that they are then responsible to keep the schema in sync with the canonical db by means of migration scripts or what have you. This solution seems to be the simplest but doesn't really scale as more developers are added. How do you deal with this problem?

    Read the article

  • Publishing/subscribing multiple subsets of the same server collection

    - by matb33
    How does one go about publishing different subsets (or "views") of a single collection on the server as multiple collections on the client? Here is some pseudo-code to help illustrate my question: items collection on the server Assume that I have an items collection on the server with millions of records. Let's also assume that: 50 records have the enabled property set to true, and; 100 records have the processed property set to true. All others are set to false. items: { "_id": "uniqueid1", "title": "item #1", "enabled": false, "processed": false }, { "_id": "uniqueid2", "title": "item #2", "enabled": false, "processed": true }, ... { "_id": "uniqueid458734958", "title": "item #458734958", "enabled": true, "processed": true } Server code Let's publish two "views" of the same server collection. One will send down a cursor with 50 records, and the other will send down a cursor with 100 records. There are over 458 million records in this fictitious server-side database, and the client does not need to know about all of those (in fact, sending them all down would probably take several hours in this example): var Items = new Meteor.Collection("items"); Meteor.publish("enabled_items", function () { // Only 50 "Items" have enabled set to true return Items.find({enabled: true}); }); Meteor.publish("processed_items", function () { // Only 100 "Items" have processed set to true return Items.find({processed: true}); }); Client code In order to support the latency compensation technique, we are forced to declare a single collection Items on the client. It should become apparent where the flaw is: how does one differentiate between Items for enabled_items and Items for processed_items? var Items = new Meteor.Collection("items"); Meteor.subscribe("enabled_items", function () { // This will output 50, fine console.log(Items.find().count()); }); Meteor.subscribe("processed_items", function () { // This will also output 50, since we have no choice but to use // the same "Items" collection. console.log(Items.find().count()); }); My current solution involves monkey-patching _publishCursor to allow the subscription name to be used instead of the collection name. But that won't do any latency compensation. Every write has to round-trip to the server: // On the client: var EnabledItems = new Meteor.Collection("enabled_items"); var ProcessedItems = new Meteor.Collection("processed_items"); With the monkey-patch in place, this will work. But go into Offline mode and changes won't appear on the client right away -- we'll need to be connected to the server to see changes. What's the correct approach?

    Read the article

  • How to approach copying objects with smart pointers as class attributes?

    - by tomislav-maric
    From the boost library documentation I read this: Conceptually, smart pointers are seen as owning the object pointed to, and thus responsible for deletion of the object when it is no longer needed. I have a very simple problem: I want to use RAII for pointer attributes of a class that is Copyable and Assignable. The copy and assignment operations should be deep: every object should have its own copy of the actual data. Also, RTTI needs to be available for the attributes (their type may also be determined at runtime). Should I be searching for an implementation of a Copyable smart pointer (the data are small, so I don't need Copy on Write pointers), or do I delegate the copy operation to the copy constructors of my objects as shown in this answer? Which smart pointer do I choose for simple RAII of a class that is copyable and assignable? (I'm thinking that the unique_ptr with delegated copy/assignment operations to the class copy constructor and assignment operator would make a proper choice, but I am not sure) Here's a pseudocode for the problem using raw pointers, it's just a problem description, not a running C++ code: // Operation interface class ModelOperation { public: virtual void operate = (); }; // Implementation of an operation called Special class SpecialModelOperation : public ModelOperation { private: // Private attributes are present here in a real implementation. public: // Implement operation void operate () {}; }; // All operations conform to ModelOperation interface // These are possible operation names: // class MoreSpecialOperation; // class DifferentOperation; // Concrete model with different operations class MyModel { private: ModelOperation* firstOperation_; ModelOperation* secondOperation_; public: MyModel() : firstOperation_(0), secondOperation_(0) { // Forgetting about run-time type definition from input files here. firstOperation_ = new MoreSpecialOperation(); secondOperation_ = new DifferentOperation(); } void operate() { firstOperation_->operate(); secondOperation_->operate(); } ~MyModel() { delete firstOperation_; firstOperation_ = 0; delete secondOperation_; secondOperation_ = 0; } }; int main() { MyModel modelOne; // Some internal scope { // I want modelTwo to have its own set of copied, not referenced // operations, and at the same time I need RAII to work for it, // as soon as it goes out of scope. MyModel modelTwo (modelOne); } return 0; }

    Read the article

  • Play! Framework - Can my view template be localised when rendering it as an AsyncResult?

    - by avik
    I've recently started using the Play! framework (v2.0.4) for writing a Java web application. In the majority of my controllers I'm following the paradigm of suspending the HTTP request until the promise of a web service response has been fulfilled. Once the promise has been fulfilled, I return an AsyncResult. This is what most of my actions look like (with a bunch of code omitted): public static Result myActionMethod() { Promise<MyWSResponse> wsResponse; // Perform a web service call that will return the promise of a MyWSResponse... return async(wsResponse.map(new Function<MyWSResponse, Result>() { @Override public Result apply(MyWSResponse response) { // Validate response... return ok(myScalaViewTemplate.render(response.data())); } })); } I'm now trying to internationalise my app, but hit the following error when I try to render a template from an async method: [error] play - Waiting for a promise, but got an error: There is no HTTP Context available from here. java.lang.RuntimeException: There is no HTTP Context available from here. at play.mvc.Http$Context.current(Http.java:27) ~[play_2.9.1.jar:2.0.4] at play.mvc.Http$Context$Implicit.lang(Http.java:124) ~[play_2.9.1.jar:2.0.4] at play.i18n.Messages.get(Messages.java:38) ~[play_2.9.1.jar:2.0.4] at views.html.myScalaViewTemplate$.apply(myScalaViewTemplate.template.scala:40) ~[classes/:na] at views.html.myScalaViewTemplate$.render(myScalaViewTemplate.template.scala:87) ~[classes/:na] at views.html.myScalaViewTemplate.render(myScalaViewTemplate.template.scala) ~[classes/:na] In short, where I've got a message bundle lookup in my view template, some Play! code is attempting to access the original HTTP request and retrieve the accept-languages header, in order to know which message bundle to use. But it seems that the HTTP request is inaccessible from the async method. I can see a couple of (unsatisfactory) ways to work around this: Go back to the 'one thread per request' paradigm and have threads block waiting for responses. Figure out which language to use at Controller level, and feed that choice into my template. I also suspect this might not be an issue on trunk. I know that there is a similar issue in 2.0.4 with regards to not being able to access or modify the Session object which has recently been fixed. However I'm stuck on 2.0.4 for the time being, so is there a better way that I can resolve this problem?

    Read the article

  • Save/Load jFreechart TimeSeriesCollection chart from XML

    - by IMAnis_tn
    I'm working with this exemple wich put rondom dynamic data into a TimeSeriesCollection chart. My problem is that i can't find how to : 1- Make a track of the old data (of the last hour) when they pass the left boundary (because the data point move from the right to the left ) of the view area just by implementing a horizontal scroll bar. 2- Is XML a good choice to save my data into when i want to have all the history of the data? public class DynamicDataDemo extends ApplicationFrame { /** The time series data. */ private TimeSeries series; /** The most recent value added. */ private double lastValue = 100.0; public DynamicDataDemo(final String title) { super(title); this.series = new TimeSeries("Random Data", Millisecond.class); final TimeSeriesCollection dataset = new TimeSeriesCollection(this.series); final JFreeChart chart = createChart(dataset); final ChartPanel chartPanel = new ChartPanel(chart); final JPanel content = new JPanel(new BorderLayout()); content.add(chartPanel); chartPanel.setPreferredSize(new java.awt.Dimension(500, 270)); setContentPane(content); } private JFreeChart createChart(final XYDataset dataset) { final JFreeChart result = ChartFactory.createTimeSeriesChart( "Dynamic Data Demo", "Time", "Value", dataset, true, true, false ); final XYPlot plot = result.getXYPlot(); ValueAxis axis = plot.getDomainAxis(); axis.setAutoRange(true); axis.setFixedAutoRange(60000.0); // 60 seconds axis = plot.getRangeAxis(); axis.setRange(0.0, 200.0); return result; } public void go() { final double factor = 0.90 + 0.2 * Math.random(); this.lastValue = this.lastValue * factor; final Millisecond now = new Millisecond(); System.out.println("Now = " + now.toString()); this.series.add(new Millisecond(), this.lastValue); } public static void main(final String[] args) throws InterruptedException { final DynamicDataDemo demo = new DynamicDataDemo("Dynamic Data Demo"); demo.pack(); RefineryUtilities.centerFrameOnScreen(demo); demo.setVisible(true); while(true){ demo.go(); Thread.currentThread().sleep(1000); } } }

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >