Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 149/627 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• SQL SERVER – Fix : Error : 3117 : The log or differential backup cannot be restored because no files

  - by pinaldave

  I received the following email from one of my readers. Dear Pinal, I am new to SQL Server and our regular DBA is on vacation. Our production database had some problem and I have just restored full database backup to production server. When I try to apply log back I am getting following error. I am sure, this is valid log backup file. Screenshot is attached. [Few other details regarding server/ip address removed] Msg 3117, Level 16, State 1, Line 1 The log or differential backup cannot be restored because no files are ready to roll forward. Msg 3013, Level 16, State 1, Line 1 RESTORE LOG is terminating abnormally. Screenshot attached. [Removed as it contained live IP address] Please help immediately. Well I have answered this question in my earlier post, 2 years ago, over here SQL SERVER – Fix : Error : Msg 3117, Level 16, State 4 The log or differential backup cannot be restored because no files are ready to rollforward. However, I will try to explain it a little more this time. For SQL Server database to be used it should in online state. There are multiple states of SQL Server Database. ONLINE (Available – online for data) OFFLINE RESTORING RECOVERING RECOVERY PENDING SUSPECT EMERGENCY (Limited Availability) If the database is online, it means it is active and in operational mode. It will not make sense to apply further log from backup if the operations have continued on this database. The common practice during the backup restore process is to specify the keyword RECOVERY when the database is restored. When RECOVERY keyword is specified, the SQL Server brings back the database online and will not accept any further log backups. However, if you want to restore more than one backup files, i.e. after restoring the full back up if you want to apply further differential or log backup you cannot do that when database is online and already active. You need to have your database in the state where it can further accept the backup data and not the online data request. If the SQL Server is online and also accepts database backup file, then there can be data inconsistency. This is the reason that when there are more than one database backup files to be restored, one has to restore the database with NO RECOVERY keyword in the RESTORE operation. I suggest you all to read one more post written by me earlier. In this post, I explained the time line with image and graphic SQL SERVER – Backup Timeline and Understanding of Database Restore Process in Full Recovery Model. Sample Code for reference: RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksFull.bak' WITH NORECOVERY; RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksDiff.bak' WITH RECOVERY; In this post, I am not trying to cover complete backup and recovery. I am just attempting to address one type of error and its resolution. Please test these scenarios on the development server. Playing with live database backup and recovery is always very crucial and needs to be properly planned. Leave a comment here if you need help with this subject. Similar Post: SQL SERVER – Restore Sequence and Understanding NORECOVERY and RECOVERY Note: We will cover Standby Server maintenance and Recovery in another blog post and it is intentionally, not covered this post. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• GPGPU

  WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

  Read the article

• MySQL Syslog Audit Plugin

  - by jonathonc

  This post shows the construction process of the Syslog Audit plugin that was presented at MySQL Connect 2012. It is based on an environment that has the appropriate development tools enabled including gcc,g++ and cmake. It also assumes you have downloaded the MySQL source code (5.5.16 or higher) and have compiled and installed the system into the /usr/local/mysql directory ready for use.  The information provided below is designed to show the different components that make up a plugin, and specifically an audit type plugin, and how it comes together to be used within the MySQL service. The MySQL Reference Manual contains information regarding the plugin API and how it can be used, so please refer there for more detailed information. The code in this post is designed to give the simplest information necessary, so handling every return code, managing race conditions etc is not part of this example code. Let's start by looking at the most basic implementation of our plugin code as seen below: /*    Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.    Author:  Jonathon Coombes    Licence: GPL    Description: An auditing plugin that logs to syslog and                 can adjust the loglevel via the system variables. */ #include <stdio.h> #include <string.h> #include <mysql/plugin_audit.h> #include <syslog.h> There is a commented header detailing copyright/licencing and meta-data information and then the include headers. The two important include statements for our plugin are the syslog.h plugin, which gives us the structures for syslog, and the plugin_audit.h include which has details regarding the audit specific plugin api. Note that we do not need to include the general plugin header plugin.h, as this is done within the plugin_audit.h file already. To implement our plugin within the current implementation we need to add it into our source code and compile. > cd /usr/local/src/mysql-5.5.28/plugin > mkdir audit_syslog > cd audit_syslog A simple CMakeLists.txt file is created to manage the plugin compilation: MYSQL_ADD_PLUGIN(audit_syslog audit_syslog.cc MODULE_ONLY) Run the cmake  command at the top level of the source and then you can compile the plugin using the 'make' command. This results in a compiled audit_syslog.so library, but currently it is not much use to MySQL as there is no level of api defined to communicate with the MySQL service. Now we need to define the general plugin structure that enables MySQL to recognise the library as a plugin and be able to install/uninstall it and have it show up in the system. The structure is defined in the plugin.h file in the MySQL source code.  /*   Plugin library descriptor */ mysql_declare_plugin(audit_syslog) {   MYSQL_AUDIT_PLUGIN,           /* plugin type                    */   &audit_syslog_descriptor,     /* descriptor handle               */   "audit_syslog",               /* plugin name                     */   "Author Name",                /* author                          */   "Simple Syslog Audit",        /* description                     */   PLUGIN_LICENSE_GPL,           /* licence                         */   audit_syslog_init,            /* init function     */   audit_syslog_deinit,          /* deinit function */   0x0001,                       /* plugin version                  */   NULL,                         /* status variables        */   NULL,                         /* system variables                */   NULL,                         /* no reserves                     */   0,                            /* no flags                        */ } mysql_declare_plugin_end; The general plugin descriptor above is standard for all plugin types in MySQL. The plugin type is defined along with the init/deinit functions and interface methods into the system for sharing information, and various other metadata information. The descriptors have an internally recognised version number so that plugins can be matched against the api on the running server. The other details are usually related to the type-specific methods and structures to implement the plugin. Each plugin has a type-specific descriptor as well which details how the plugin is implemented for the specific purpose of that plugin type. /*   Plugin type-specific descriptor */ static struct st_mysql_audit audit_syslog_descriptor= {   MYSQL_AUDIT_INTERFACE_VERSION,                        /* interface version    */   NULL,                                                 /* release_thd function */   audit_syslog_notify,                                  /* notify function      */   { (unsigned long) MYSQL_AUDIT_GENERAL_CLASSMASK |                     MYSQL_AUDIT_CONNECTION_CLASSMASK }  /* class mask           */ }; In this particular case, the release_thd function has not been defined as it is not required. The important method for auditing is the notify function which is activated when an event occurs on the system. The notify function is designed to activate on an event and the implementation will determine how it is handled. For the audit_syslog plugin, the use of the syslog feature sends all events to the syslog for recording. The class mask allows us to determine what type of events are being seen by the notify function. There are currently two major types of event: 1. General Events: This includes general logging, errors, status and result type events. This is the main one for tracking the queries and operations on the database. 2. Connection Events: This group is based around user logins. It monitors connections and disconnections, but also if somebody changes user while connected. With most audit plugins, the principle behind the plugin is to track changes to the system over time and counters can be an important part of this process. The next step is to define and initialise the counters that are used to track the events in the service. There are 3 counters defined in total for our plugin - the # of general events, the # of connection events and the total number of events.  static volatile int total_number_of_calls; /* Count MYSQL_AUDIT_GENERAL_CLASS event instances */ static volatile int number_of_calls_general; /* Count MYSQL_AUDIT_CONNECTION_CLASS event instances */ static volatile int number_of_calls_connection; The init and deinit functions for the plugin are there to be called when the plugin is activated and when it is terminated. These offer the best option to initialise the counters for our plugin: /*  Initialize the plugin at server start or plugin installation. */ static int audit_syslog_init(void *arg __attribute__((unused))) {     openlog("mysql_audit:",LOG_PID|LOG_PERROR|LOG_CONS,LOG_USER);     total_number_of_calls= 0;     number_of_calls_general= 0;     number_of_calls_connection= 0;     return(0); } The init function does a call to openlog to initialise the syslog functionality. The parameters are the service to log under ("mysql_audit" in this case), the syslog flags and the facility for the logging. Then each of the counters are initialised to zero and a success is returned. If the init function is not defined, it will return success by default. /*  Terminate the plugin at server shutdown or plugin deinstallation. */ static int audit_syslog_deinit(void *arg __attribute__((unused))) {     closelog();     return(0); } The deinit function will simply close our syslog connection and return success. Note that the syslog functionality is part of the glibc libraries and does not require any external factors.  The function names are what we define in the general plugin structure, so these have to match otherwise there will be errors. The next step is to implement the event notifier function that was defined in the type specific descriptor (audit_syslog_descriptor) which is audit_syslog_notify. /* Event notifier function */ static void audit_syslog_notify(MYSQL_THD thd __attribute__((unused)), unsigned int event_class, const void *event) { total_number_of_calls++; if (event_class == MYSQL_AUDIT_GENERAL_CLASS) { const struct mysql_event_general *event_general= (const struct mysql_event_general *) event; number_of_calls_general++; syslog(audit_loglevel,"%lu: User: %s Command: %s Query: %s\n", event_general->general_thread_id, event_general->general_user, event_general->general_command, event_general->general_query ); } else if (event_class == MYSQL_AUDIT_CONNECTION_CLASS) { const struct mysql_event_connection *event_connection= (const struct mysql_event_connection *) event; number_of_calls_connection++; syslog(audit_loglevel,"%lu: User: %s@%s[%s] Event: %d Status: %d\n", event_connection->thread_id, event_connection->user, event_connection->host, event_connection->ip, event_connection->event_subclass, event_connection->status ); } }   In the case of an event, the notifier function is called. The first step is to increment the total number of events that have occurred in our database.The event argument is then cast into the appropriate event structure depending on the class type, of general event or connection event. The event type counters are incremented and details are sent via the syslog() function out to the system log. There are going to be different line formats and information returned since the general events have different data compared to the connection events, even though some of the details overlap, for example, user, thread id, host etc. On compiling the code now, there should be no errors and the resulting audit_syslog.so can be loaded into the server and ready to use. Log into the server and type: mysql> INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so'; This will install the plugin and will start updating the syslog immediately. Note that the audit plugin attaches to the immediate thread and cannot be uninstalled while that thread is active. This means that you cannot run the UNISTALL command until you log into a different connection (thread) on the server. Once the plugin is loaded, the system log will show output such as the following: Oct  8 15:33:21 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: (null)  Query: INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so' Oct  8 15:33:21 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: Query  Query: INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so' Oct  8 15:33:40 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: (null)  Query: show tables Oct  8 15:33:40 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: Query  Query: show tables Oct  8 15:33:43 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: (null)  Query: select * from t1 Oct  8 15:33:43 machine mysql_audit:[8337]: 87: User: root[root] @ localhost []  Command: Query  Query: select * from t1 It appears that two of each event is being shown, but in actuality, these are two separate event types - the result event and the status event. This could be refined further by changing the audit_syslog_notify function to handle the different event sub-types in a different manner.  So far, it seems that the logging is working with events showing up in the syslog output. The issue now is that the counters created earlier to track the number of events by type are not accessible when the plugin is being run. Instead there needs to be a way to expose the plugin specific information to the service and vice versa. This could be done via the information_schema plugin api, but for something as simple as counters, the obvious choice is the system status variables. This is done using the standard structure and the declaration: /*  Plugin status variables for SHOW STATUS */ static struct st_mysql_show_var audit_syslog_status[]= {   { "Audit_syslog_total_calls",     (char *) &total_number_of_calls,     SHOW_INT },   { "Audit_syslog_general_events",     (char *) &number_of_calls_general,     SHOW_INT },   { "Audit_syslog_connection_events",     (char *) &number_of_calls_connection,     SHOW_INT },   { 0, 0, SHOW_INT } };   The structure is simply the name that will be displaying in the mysql service, the address of the associated variables, and the data type being used for the counter. It is finished with a blank structure to show that there are no more variables. Remember that status variables may have the same name for variables from other plugin, so it is considered appropriate to add the plugin name at the start of the status variable name to avoid confusion. Looking at the status variables in the mysql client shows something like the following: mysql> show global status like "audit%"; +--------------------------------+-------+ | Variable_name                  | Value | +--------------------------------+-------+ | Audit_syslog_connection_events | 1     | | Audit_syslog_general_events    | 2     | | Audit_syslog_total_calls       | 3     | +--------------------------------+-------+ 3 rows in set (0.00 sec) The final connectivity piece for the plugin is to allow the interactive change of the logging level between the plugin and the system. This requires the ability to send changes via the mysql service through to the plugin. This is done using the system variables interface and defining a single variable to keep track of the active logging level for the facility. /* Plugin system variables for SHOW VARIABLES */ static MYSQL_SYSVAR_STR(loglevel, audit_loglevel,                         PLUGIN_VAR_RQCMDARG,                         "User can specify the log level for auditing",                         audit_loglevel_check, audit_loglevel_update, "LOG_NOTICE"); static struct st_mysql_sys_var* audit_syslog_sysvars[] = {     MYSQL_SYSVAR(loglevel),     NULL }; So now the system variable 'loglevel' is defined for the plugin and associated to the global variable 'audit_loglevel'. The check or validation function is defined to make sure that no garbage values are attempted in the update of the variable. The update function is used to save the new value to the variable. Note that the audit_syslog_sysvars structure is defined in the general plugin descriptor to associate the link between the plugin and the system and how much they interact. Next comes the implementation of the validation function and the update function for the system variable. It is worth noting that if you have a simple numeric such as integers for the variable types, the validate function is often not required as MySQL will handle the automatic check and validation of simple types. /* longest valid value */ #define MAX_LOGLEVEL_SIZE 100 /* hold the valid values */ static const char *possible_modes[]= { "LOG_ERROR", "LOG_WARNING", "LOG_NOTICE", NULL };  static int audit_loglevel_check(     THD*                        thd,    /*!< in: thread handle */     struct st_mysql_sys_var*    var,    /*!< in: pointer to system                                         variable */     void*                       save,   /*!< out: immediate result                                         for update function */     struct st_mysql_value*      value)  /*!< in: incoming string */ {     char buff[MAX_LOGLEVEL_SIZE];     const char *str;     const char **found;     int length;     length= sizeof(buff);     if (!(str= value->val_str(value, buff, &length)))         return 1;     /*         We need to return a pointer to a locally allocated value in "save".         Here we pick to search for the supplied value in an global array of         constant strings and return a pointer to one of them.         The other possiblity is to use the thd_alloc() function to allocate         a thread local buffer instead of the global constants.     */     for (found= possible_modes; *found; found++)     {         if (!strcmp(*found, str))         {             *(const char**)save= *found;             return 0;         }     }     return 1; } The validation function is simply to take the value being passed in via the SET GLOBAL VARIABLE command and check if it is one of the pre-defined values allowed  in our possible_values array. If it is found to be valid, then the value is assigned to the save variable ready for passing through to the update function. static void audit_loglevel_update(     THD*                        thd,        /*!< in: thread handle */     struct st_mysql_sys_var*    var,        /*!< in: system variable                                             being altered */     void*                       var_ptr,    /*!< out: pointer to                                             dynamic variable */     const void*                 save)       /*!< in: pointer to                                             temporary storage */ {     /* assign the new value so that the server can read it */     *(char **) var_ptr= *(char **) save;     /* assign the new value to the internal variable */     audit_loglevel= *(char **) save; } Since all the validation has been done already, the update function is quite simple for this plugin. The first part is to update the system variable pointer so that the server can read the value. The second part is to update our own global plugin variable for tracking the value. Notice that the save variable is passed in as a void type to allow handling of various data types, so it must be cast to the appropriate data type when assigning it to the variables. Looking at how the latest changes affect the usage of the plugin and the interaction within the server shows: mysql> show global variables like "audit%"; +-----------------------+------------+ | Variable_name         | Value      | +-----------------------+------------+ | audit_syslog_loglevel | LOG_NOTICE | +-----------------------+------------+ 1 row in set (0.00 sec) mysql> set global audit_syslog_loglevel="LOG_ERROR"; Query OK, 0 rows affected (0.00 sec) mysql> show global status like "audit%"; +--------------------------------+-------+ | Variable_name                  | Value | +--------------------------------+-------+ | Audit_syslog_connection_events | 1     | | Audit_syslog_general_events    | 11    | | Audit_syslog_total_calls       | 12    | +--------------------------------+-------+ 3 rows in set (0.00 sec) mysql> show global variables like "audit%"; +-----------------------+-----------+ | Variable_name         | Value     | +-----------------------+-----------+ | audit_syslog_loglevel | LOG_ERROR | +-----------------------+-----------+ 1 row in set (0.00 sec)   So now we have a plugin that will audit the events on the system and log the details to the system log. It allows for interaction to see the number of different events within the server details and provides a mechanism to change the logging level interactively via the standard system methods of the SET command. A more complex auditing plugin may have more detailed code, but each of the above areas is what will be involved and simply expanded on to add more functionality. With the above skeleton code, it is now possible to create your own audit plugins to implement your own auditing requirements. If, however, you are not of the coding persuasion, then you could always consider the option of the MySQL Enterprise Audit plugin that is available to purchase.

  Read the article

• New security options in UCM Patch Set 3

  - by kyle.hatlestad

  While the Patch Set 3 (PS3) release was mostly focused on bug fixes and such, some new features sneaked in there. One of those new features is to the security options. In 10gR3 and prior versions, UCM had a component called Collaboration Manager which allowed for project folders to be created and groups of users assigned as members to collaborate on documents. With this component came access control lists (ACL) for content and folders. Users could assign specific security rights on each and every document and folder within a project. And it was even possible to enable these ACL's without having the Collaboration Manager component enabled (see technote# 603148.1). When 11g came out, Collaboration Manager was no longer available. But the configuration settings to turn on ACLs were still there. Well, in PS3 they're implemented slightly differently. And there is a new component available which adds an additional dimension to define security on the object, Roles. So now instead of selecting individual users or groups of users (defined as an Alias in User Admin), you can select a particular role. And if a user has that role, they are granted that level of access. This can allow for a much more flexible and manageable security model instead of trying to manage with just user and group access as people come and go in the organization. The way that it is enabled is still through configuration entries. First log in as an administrator and go to Administration -> Admin Server. On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top. In the list of Disabled Components, enable the RoleEntityACL component. Then click the General Configuration link on the left. In the Additional Configuration Variables text area, enter the new configuration values: UseEntitySecurity=true SpecialAuthGroups=<comma separated list of Security Groups to honor ACLs> The SpecialAuthGroups should be a list of Security Groups that honor the ACL fields. If an ACL is applied to a content item with a Security Group outside this list, it will be ignored. Save the settings and restart the instance. Upon restart, three new metadata fields will be created: xClbraUserList, xClbraAliasList, xClbraRoleList. If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. On the Check In, Search, and Update pages, values are added by simply typing in the value and getting a type-ahead list of possible values. Select the value, click Add and then set the level of access (Read, Write, Delete, or Admin). If all of the fields are blank, then it simply falls back to just Security Group and Account access. For Users and Groups, these values are automatically picked up from the corresponding database tables. In the case of Roles, this is an explicitly defined list of choices that are made available. These values must match the role that is being defined from WebLogic Server or you LDAP/AD repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager. On the Views tab, edit the values for the ExternalRolesView. By default, 'guest' and 'authenticated' are added. Once added to through the view, they will be available to select from for the Roles Access List. As for how they are stored in the metadata fields, each entry starts with it's identifier: ampersand (&) symbol for users, "at" (@) symbol for groups, and colon (:) for roles. Following that is the entity name. And at the end is the level of access in paranthesis. e.g. (RWDA). And each entry is separated by a comma. So if you were populating values through batch loader or an external source, the values would be defined this way. Detailed information on Access Control Lists can be found in the Oracle Fusion Middleware System Administrator's Guide for Oracle Content Server.

  Read the article

• Time to stop using &ldquo;Execute Package Task&rdquo;&ndash; a way to execute package in SSIS catalog taking advantage of the new project deployment model ,and the logging and reporting feature

  - by Kevin Shyr

  I set out to find a way to dynamically call package in SSIS 2012.  The following are 2 excellent blogs I found; I used them heavily.  The code below has some addition to parameter types and message types, but was made essentially derived entirely from the blogs. http://sqlblog.com/blogs/jamie_thomson/archive/2011/07/16/ssis-logging-in-denali.aspx http://www.ssistalk.com/2012/07/24/quick-tip-run-ssis-2012-packages-synchronously-and-other-execution-options/   The code: Every package will be called by a PackageController package.  The packageController is initialized with some information on which package to run and what information to pass in.   The following is the stored procedure called from the “Execute SQL Task”.  Here is the highlight of the stored procedure It takes in packageName, project name, and folder name (folder in SSIS project deployment to SSIS catalog) The stored procedure sets the package variables of the upcoming package execution Execute package in SSIS Catalog Get the status of the execution.  Also, if exists, get the error message’s message_id and store them in the management database. Return value to “Execute SQL Task” to manage failure properly CREATE PROCEDURE [AUDIT].[LaunchPackageExecutionInSSISCatalog]        @PackageName NVARCHAR(255)        , @ProjectFolder NVARCHAR(255)        , @ProjectName NVARCHAR(255)        , @AuditKey INT        , @DisableNotification BIT        , @PackageExecutionLogID INT AS BEGIN TRY        DECLARE @execution_id BIGINT = 0;        -- Create a package execution        EXEC [SSISDB].[catalog].[create_execution]                     @package_name=@PackageName,                     @execution_id=@execution_id OUTPUT,                     @folder_name=@ProjectFolder,                     @project_name=@ProjectName,                     @use32bitruntime=False;          UPDATE [AUDIT].[PackageInstanceExecutionLog] WITH(ROWLOCK)        SET [SSISCatalogExecutionID] = @execution_id        WHERE [PackageInstanceExecutionLogID] = @PackageExecutionLogID          -- this is to set the execution synchronized so that I can check the result in the end        EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=50,                     @parameter_name=N'SYNCHRONIZED',                     @parameter_value=1; -- true          /********************************************************         ********************************************************              Section: setting parameters                     Source table:  SSISDB.internal.object_parameters              object_type list:                     20: project level variables                     30: package level variables                     50: execution parameter         ********************************************************         ********************************************************/        EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=30,                     @parameter_name=N'FromParent_AuditKey',                     @parameter_value=@AuditKey; -- true          EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=30,                     @parameter_name=N'FromParent_DisableNotification',                     @parameter_value=@DisableNotification; -- true          EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=30,                     @parameter_name=N'FromParent_PackageInstanceExecutionID',                     @parameter_value=@PackageExecutionLogID; -- true        /********************************************************         ********************************************************              Section: setting variables END         ********************************************************         ********************************************************/            /* This section is carried over from example code           I don't see a reason to change them yet        */        -- Set our package parameters        EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=50,                     @parameter_name=N'DUMP_ON_EVENT',                     @parameter_value=1; -- true          EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=50,                     @parameter_name=N'DUMP_EVENT_CODE',                     @parameter_value=N'0x80040E4D;0x80004005';          EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=50,                     @parameter_name=N'LOGGING_LEVEL',                     @parameter_value= 1; -- Basic          EXEC [SSISDB].[catalog].[set_execution_parameter_value]                     @execution_id,                      @object_type=50,                     @parameter_name=N'DUMP_ON_ERROR',                     @parameter_value=1; -- true                              /********************************************************         ********************************************************              Section: EXECUTING         ********************************************************         ********************************************************/        EXEC [SSISDB].[catalog].[start_execution]                     @execution_id;        /********************************************************         ********************************************************              Section: EXECUTING END         ********************************************************         ********************************************************/            /********************************************************         ********************************************************              Section: checking execution result                     Source table:  [SSISDB].[catalog].[executions]              status:                     1: created                     2: running                     3: cancelled                     4: failed                     5: pending                     6: ended unexpectedly                     7: succeeded                     8: stopping                     9: completed         ********************************************************         ********************************************************/        if EXISTS(SELECT TOP 1 1                            FROM [SSISDB].[catalog].[executions] WITH(NOLOCK)                            WHERE [execution_id] = @execution_id                                  AND [status] NOT IN (2, 7, 9)) BEGIN                /********************************************************               ********************************************************                     Section: logging error messages                            Source table:  [SSISDB].[internal].[operation_messages]                     message type:                            10:  OnPreValidate                             20:  OnPostValidate                             30:  OnPreExecute                             40:  OnPostExecute                             60:  OnProgress                             70:  OnInformation                             90:  Diagnostic                             110:  OnWarning                            120:  OnError                            130:  Failure                            140:  DiagnosticEx                             200:  Custom events                             400:  OnPipeline                     message source type:                            10:  Messages logged by the entry APIs (e.g. T-SQL, CLR Stored procedures)                             20:  Messages logged by the external process used to run package (ISServerExec)                             30:  Messages logged by the package-level objects                             40:  Messages logged by tasks in the control flow                             50:  Messages logged by containers (For, ForEach, Sequence) in the control flow                             60:  Messages logged by the Data Flow Task                                    ********************************************************               ********************************************************/                INSERT INTO AUDIT.PackageInstanceExecutionOperationErrorLink                     SELECT @PackageExecutionLogID                                  ,[operation_message_id]                            FROM [SSISDB].[internal].[operation_messages] WITH(NOLOCK)                            WHERE operation_id = @execution_id                                  AND message_type IN (120, 130)                           EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, 'SSISDB Internal operation_messages found'                GOTO ReturnTrueAsErrorFlag                /********************************************************               ********************************************************                     Section: checking messages END               ********************************************************               ********************************************************/                /* This part is not really working, so now using rowcount to pass status              --DECLARE @PackageErrorMessage NVARCHAR(4000)              --SET @PackageErrorMessage = @PackageName + 'failed with executionID: ' + CONVERT(VARCHAR(20), @execution_id)                --RAISERROR (@PackageErrorMessage -- Message text.              --     , 18 -- Severity,              --     , 1 -- State,              --     , N'check table AUDIT.PackageInstanceExecutionErrorMessages' -- First argument.              --     );              */        END        ELSE BEGIN              GOTO ReturnFalseAsErrorFlagToSignalSuccess        END        /********************************************************         ********************************************************              Section: checking execution result END         ********************************************************         ********************************************************/ END TRY BEGIN CATCH        DECLARE @SSISCatalogCallError NVARCHAR(MAX)        SELECT @SSISCatalogCallError = ERROR_MESSAGE()          EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, @SSISCatalogCallError          GOTO ReturnTrueAsErrorFlag END CATCH;     /********************************************************  ********************************************************    Section: end result  ********************************************************  ********************************************************/ ReturnTrueAsErrorFlag:        SELECT CONVERT(BIT, 1) AS PackageExecutionErrorExists ReturnFalseAsErrorFlagToSignalSuccess:        SELECT CONVERT(BIT, 0) AS PackageExecutionErrorExists   GO

  Read the article

• BIP BIServer Query Debug

  - by Tim Dexter

  With some help from Bryan, I have uncovered a way of being able to debug or at least log what BIServer is doing when BIP sends it a query request. This is not for those of you querying the database directly but if you are using the BIServer and its datamodel to fetch data for a BIP report. If you have written or used the query builder against BIServer and when you run the report it chokes with a cryptic message, that you have no clue about, read on. When BIP runs a piece of BIServer logical SQL to fetch data. It does not appear to validate it, it just passes it through, so what is BIServer doing on its end? As you may know, you are not writing regular physical sql its actually logical sql e.g. select Jobs."Job Title" as "Job Title", Employees."Last Name" as "Last Name", Employees.Salary as Salary, Locations."Department Name" as "Department Name", Locations."Country Name" as "Country Name", Locations."Region Name" as "Region Name" from HR.Locations Locations, HR.Employees Employees, HR.Jobs Jobs The tables might not even be a physical tables, we don't care, that's what the BIServer and its model are for. You have put all the effort into building the model, just go get me the data from where ever it might be. The BIServer takes the logical sql and uses its vast brain to work out what the physical SQL is, executes it and passes the result back to BIP. select distinct T32556.JOB_TITLE as c1, T32543.LAST_NAME as c2, T32543.SALARY as c3, T32537.DEPARTMENT_NAME as c4, T32532.COUNTRY_NAME as c5, T32577.REGION_NAME as c6 from JOBS T32556, REGIONS T32577, COUNTRIES T32532, LOCATIONS T32569, DEPARTMENTS T32537, EMPLOYEES T32543 where ( T32532.COUNTRY_ID = T32569.COUNTRY_ID and T32532.REGION_ID = T32577.REGION_ID and T32537.DEPARTMENT_ID = T32543.DEPARTMENT_ID and T32537.LOCATION_ID = T32569.LOCATION_ID and T32543.JOB_ID = T32556.JOB_ID ) Not a very tough example I know but you get the idea. How do I know what the BIServer is up to? How can I find out what the issue might be if BIServer chokes on my query? There are a couple of steps: In the Administrator tool you need to set the logging level for the Administrator user to something greater than the default '0'. '7' is going to give you the max. Just remember to take it back down after you have finished the debug. I needed to bounce my BIServer service Now here's the secret sauce. Prefix the following to your BIP query set variable LOGLEVEL = 7; Set the log level to that you have in the admin tool Now run your BIP report. With the prefix in place; BIServer will write to the NQQuery.log file. This is located in the ./OracleBI/server/Log directory. In there you are going to find the complete process the BIServer has gone through to try and get the data back for you A quick note, if the BIServer can, its going to hit that great BIEE cache to get your data and you may not see the full log. IF this is the case. Get inot hte Administration page (via the browser login) and clear out your BIP report cursor. Then re-run. This will hopefully help out if you are trying to debug that annoying BIP report that will not run or is getting some strange data. Don't forget to turn that logging level back down once you are done. This will avoid the DBA screaming at you for sucking up all the disk space on the system.

  Read the article

• Unable to either locate any wireless networks nor even connect to wifi

  - by Leo Chan

  I'm new to Linux. I currently have installed ubuntu 12.10. I had a previous problem with my wireless card (see url to see previous problem : How to enable wireless in a Fujitsu LH532?). It now shows Connect to hidden network and create new wireless network but now unfortunately it simply cannot find any wireless connections. I did have a very thorough look around about this problem such as wait a little longer since sometimes it cannot load all the wireless connections available that quickly. My wifi is a hidden network and I have used the connect to hidden network feature but it keeps asking for my wep key which has been checked 4 times (I counted) and it still seems to not work; It keeps asking for the WEP key. I did try both WEP 40/128-bit key and WPA & WPA2 since previously on my windows it worked; My family later decided to use WEP. I only have a quick fix using a usb wireless stick and I wish to have a more solid fix. Thanks Results from sudo iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1E:73:C8:62:BD Channel:6 Frequency:2.437 GHz (Channel 6) Quality=25/70 Signal level=-85 dBm Encryption key:on ESSID:"EnigmaHome" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bb10a5c Extra: Last beacon: 696ms ago IE: Unknown: 000A456E69676D61486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 Cell 02 - Address: C8:3A:35:34:C1:60 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=22/70 Signal level=-88 dBm Encryption key:on ESSID:"Tenda" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000001336e70ffdd Extra: Last beacon: 716ms ago IE: Unknown: 000554656E6461 IE: Unknown: 010882848B961224486C IE: Unknown: 030106 IE: Unknown: 32040C183060 IE: Unknown: 0706434E20010D10 IE: Unknown: 33082001020304050607 IE: Unknown: 33082105060708090A0B IE: Unknown: DD270050F204104A0001101044000101104700102880288028801880A880C83A3534C160103C000101 IE: Unknown: 050400010000 IE: Unknown: 2A0106 IE: Unknown: 2D1AEC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: 3D1606000500000000000000000000000000000000000000 IE: Unknown: 7F0101 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Preauthentication Supported IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 IE: Unknown: 0B05010089127A IE: Unknown: DD1E00904C33EC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: DD1A00904C3406000500000000000000000000000000000000000000 IE: Unknown: DD07000C4304000000 Cell 03 - Address: 00:1E:73:C8:62:BF Channel:6 Frequency:2.437 GHz (Channel 6) Quality=47/70 Signal level=-63 dBm Encryption key:on ESSID:"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bac614e Extra: Last beacon: 1064ms ago IE: Unknown: 00110000000000000000000000000000000000 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 050C010200000000000000000000 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD070050F202000100

  Read the article

• Windows Azure Use Case: New Development

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

  Read the article

• Developing an Implementation Plan with Iterations by Russ Pitts

  - by user535886

  Developing an Implementation Plan with Iterations by Russ Pitts  Ok, so you have come to grips with understanding that applying the iterative concept, as defined by OUM is simply breaking up the project effort you have estimated for each phase into one or more six week calendar duration blocks of work. Idea being the business user(s) or key recipient(s) of work product(s) being developed never go longer than six weeks without having some sort of review or prototyping of the work results for an iteration…”think-a-little”, “do-a-little”, and “show-a-little” in a six week or less timeframe…ideally the business user(s) or key recipients(s) are involved throughout. You also understand the OUM concept that you only plan for that which you have knowledge of. The concept further defined, a project plan initially is developed at a high-level, and becomes more detailed as project knowledge grows. Agreeing to this concept means you also have to admit to the fallacy that one can plan with precision beyond six weeks into a project…Anything beyond six weeks is a best guess in most cases when dealing with software implementation projects. Project planning, as defined by OUM begins with the Implementation Plan view, which is a very high-level perspective of the effort estimated for each of the five OUM phases, as well as the number of iterations within each phase. You might wonder how can you predict the number of iterations for each phase at this early point in the project. Remember project planning is not an exact science, and initially is high-level and abstract in nature, and then becomes more detailed and precise as the project proceeds. So where do you start in defining iterations for each phase for a project? The following are three easy steps to initially define the number of iterations for each phase: Step 1 => Start with identifying the known factors… …Prior to starting a project you should know: · The agreed upon time-period for an iteration (e.g 6 weeks, or 4 weeks, or…) within a phase (recommend keeping iteration time-period consistent within a phase, if not for the entire project) · The number of resources available for the project · The number of total number of man-day (effort) you have estimated for each of the five OUM phases of the project · The number of work days for a week Step 2 => Calculate the man-days of effort required for an iteration within a phase… Lets assume for the sake of this example there are 10 project resources, and you have estimated 2,536 man-days of work effort which will need to occur for the elaboration phase of the project. Let’s also assume a week for this project is defined as 5 business days, and that each iteration in the elaboration phase will last a calendar duration of 6 weeks. A simple calculation is performed to calculate the daily burn rate for a single iteration, which produces a result of… ((Number of resources * days per week) * duration of iteration) = Number of days required per iteration ((10 resources * 5 days/week) * 6 weeks) = 300 man days of effort required per iteration Step 3 => Calculate the number of iterations that can occur within a phase Next calculate the number of iterations that can occur for the amount of man-days of effort estimated for the phase being considered… (number of man-days of effort estimated / number of man-days required per iteration) = # of iterations for phase (2,536 man-days of estimated effort for phase / 300 man days of effort required per iteration) = 8.45 iterations, which should be rounded to a whole number such as 9 iterations* *Note - It is important to note this is an approximate calculation, not an exact science. This particular example is a simple one, which assumes all resources are utilized throughout the phase, including tech resources, etc. (rounding down or up to a whole number based on project factor considerations). It is also best in many cases to round up to higher number, as this provides some calendar scheduling contingency.

  Read the article

• Pimp my Silverlight Firestarter

  - by mbcrump

  So Silverlight Firestarter is over and your sitting on your couch thinking… what now? Well its time to So how exactly can you pimp the Silverlight Firestarter? Well read below and you will find out: 1) Pimp the videos: First we are going to use a program named Juice to download all of the Silverlight Firestarter videos. Go ahead and point your browser to http://juicereceiver.sourceforge.net/ and download the application. It works on Mac, Linux and PC. After it is downloaded you are going to want to add an RSS feed by clicking the button highlighted below. At this point you are going to want to add the following URL inside the textbox and hit Save: http://channel9.msdn.com/Series/Silverlight-Firestarter/RSS This RSS feed includes all the Silverlight Firestarter Labs and Presentations located below. The Future of Silverlight Data Binding Strategies with Silverlight and WP7 Building Compelling Apps with WCF using REST and LINQ Building Feature Rich Business Apps Today with RIA Services MVVM: Why and How? Tips and Patterns using MVVM and Service Patterns with Silverlight and WP7 Tips and Tricks for a Great Installation Experience Tune Your Application: Profiling and Performance Tips Performance Tips for Silverlight Windows Phone 7 Select all the videos and click the Download button located below (has blue arrow): Once all the videos are downloaded you will have about 4.64GB of Silverlight fun. You can now move these videos to your MediaServer and watch them with whatever device you want. Put it on an iPad, iPhone.. emm wait I mean WP7 or WMC7.  2) Pimp the Training Material – Download the offline installer for the labs here. This will give you almost a gig of free training materials. Here is the topics covered: Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7 You will notice that it install Firestarter to the default of C:\Firestarter. So you will have to navigate to that folder and double click on Default.htm to get started. Now if you followed part one of the pimping guide then you will already have all the videos on your pc. You will notice that once you go into the lab you will get a Lab Document and Source at the bottom of the article. Now instead of opening the Source Folder in a web browser you can just copy the folder C:\Firestarter\Labs into your Visual Studio 2010 Project Folder. This will save a lot of time later.   3) Pimp my Silverlight 5 Knowledge – Always keep reading as much as possible and remember that the Silverlight 5 Beta should come Q1 of 2011 and the final release at the end of 2011. Here are 5 great blog post on Silverlight 5. Scott Gu’s Blog Mary Jo’s Article on Silverlight 5 The Future of Silverlight (Official) Kunal Chowdhury Blog Tim Heuer’s Blog Thats all that I got for now. Have fun with all the new Silverlight content.  Subscribe to my feed

  Read the article

• St. Louis ALT.NET

  - by Brian Schroer

  I’m a huge fan of the St. Louis .NET User Group and a regular attendee of their meetings, but always wished there was a local group that discussed more advanced .NET topics. (That’s not a criticism of the group - I appreciate that they want to server developers with a broad range of skill levels). That’s why I was thrilled when Nicholas Cloud started a St. Louis ALT.NET group in 2010. Here’s the “about us” statement from the group’s web site: The ALT.NET community is a loosely coupled, highly cohesive group of like-minded individuals who believe that the best developers do not align themselves with platforms and languages, but with principles and ideas. In 2007, David Laribee created the term "ALT.NET" to explain this "alternative" view of the Microsoft development universe--a view that challenged the "Microsoft-only" approach to software development. He distilled his thoughts into four key developer characteristics which form the basis of the ALT.NET philosophy: You're the type of developer who uses what works while keeping an eye out for a better way. You reach outside the mainstream to adopt the best of any community: Open Source, Agile, Java, Ruby, etc. You're not content with the status quo. Things can always be better expressed, more elegant and simple, more mutable, higher quality, etc. You know tools are great, but they only take you so far. It's the principles and knowledge that really matter. The best tools are those that embed the knowledge and encourage the principles (e.g. Resharper.) The St. Louis ALT.NET meetup group is a place where .NET developers can learn, share, and critique approaches to software development on the .NET stack. We cater to the highest common denominator, not the lowest, and want to help all St. Louis .NET developers achieve a superior level of software craftsmanship. I don’t see a lot of ALT.NET talk in blogs these days. The movement was harmed early on by the negative attitudes of some of its early leaders, including jerk moves like the Entity Framework “vote of no confidence”, but I do see occasional mentions of local groups like the St. Louis one. I think ALT.NET has been successful at bringing some of its ideas into the .NET world, including heavily influencing ASP.NET MVC and raising the general level of software craftsmanship for developers working on the Microsoft stack. The ideas and ideals live on, they’re just not branded as “this is ALT.NET!” In the past 18 months, St. Louis ALT.NET meetups have discussed topics like: NHibernate F# and other functional languages AOP CoffeeScript “How Ruby Is Making Me a Stronger C# Developer” Using rake for builds CQRS .NET dynamic programming micro web frameworks – Nancy & Jessica Git ALT.NET doesn’t mean (to me, anyway) “alternatives to .NET”, but “alternatives for .NET”. We look at how things are done in Ruby and other languages/platforms, but always with the idea “What can I learn from this to take back to my “day job” with .NET?”. Meetings are held at 7PM on the fourth Wednesday of each month at the offices of Professional Employment Group. PEG is located at 999 Executive Parkway (Suite 100 – lower level) in Creve Coeur (South of Olive off of Mason Road - Here's a map). Food is not supplied (sorry if you’re a big fan of the Papa John’s Crust-Lovers’ Pizza that’s a staple of user group meetings), but attendees are encouraged to come early and bring/share beer, so that’s cool. Thanks to Nick for organizing, and to Professional Employment Group for lending their offices. Please visit the meetup site for more information.

  Read the article

• Windows Azure Use Case: New Development

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

  Read the article

• SQL SERVER – Performance Tuning Resolution

  - by pinaldave

  This blog post is written in response to T-SQL Tuesday hosted by MidnightDBAs. Taking resolutions is such an interesting subject. I think just like records, these are broken way more often. I find this is the funniest thing as we all take resolutions every year but not every year, we can manage to keep them. Well, does it mean we should not take resolutions? In fact I support resolutions. Every year, I take a resolution that I will strive reduce my body weight and I usually manage to keep eating healthy till the end of January. When February begins, I begin to loose focus from my goal and as March starts, the “As usual” eating habits begin. Looking at the positive side, what would happen if every year I do not eat healthy in January, I think that might cause terrible consequences to my health in the long run. So keeping resolutions is a good practise and following them to the extent one can is commendable. Let us come back to the world of SQL Server. What is my resolution for year 2011 for SQL Server? There are many, I am going to list three of very important resolutions that I have taken this new year over here. To understand SQL Server Performance Tuning at a deeper Level I think I am already half way through. I have been being very much busy during any given month doing hands-on performance tuning for at least 12 days on an average. That means, I am doing this activity for almost doing 2 weeks a month. I believe that I have a good understanding of the subject. Note that the word that I have used is “good,” and not “best.” There are often cases when I am stumped, and I have no clue of what to do next. Then, I usually go for my “trial and error” method - whichever method works, I make sure to keep a note on my blog. My goal is that I should never ever go for the trial and error method again to achieve the same solution. I should know the solution right away when I see the problem. I do understand that Performance Tuning can be a strange animal at times and one cannot guess the right step every time. However, aiming a high goal never hurts and I am going to learn more and more in this focused area. Going further from Basic BI understanding I do fairly decent with BI concepts. I know the nbasics of SSIS, SSRS, SSAS, PowerPivot and SharePoint (and few other things MDS, StreamInsight, etc). However, I still consider myself as a beginner. I do not have hands-on experience like many other BI Gurus around. I think I want to take my learning further in this direction. I do not want to be a BI expert as the first step but the goal is to move ahead from basic level towards an advanced level. I am going to start presenting in User Group Sessions and other places on this subject. When I have to prepare new subject for presentations, I think I force myself to learn more. I am committed to learn a bit more in this direction. Learning new features SQL Server 2011 Denali This is new thing from “Microsoft” for all the SQL Geeks. I am eagerly waiting for final product later this year and I am planning to learn it well. I think if I follow my above two goals, I think this goal will be automatically covered. I am eager and excited for this new offering from Microsoft. I guess, these are my resolutions; may be next year about the same time, I must revisit this post and see how much successful I am in following my goal. On a lighter note, I am particularly fan of following cartoon strip (Courtesy: Calvin and Hobbes). I think when we cannot resolve our resolutions, we tend to act like Calvin. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• Thoughts on C# Extension Methods

  - by Damon

  I'm not a huge fan of extension methods.  When they first came out, I remember seeing a method on an object that was fairly useful, but when I went to use it another piece of code that method wasn't available.  Turns out it was an extension method and I hadn't included the appropriate assembly and imports statement in my code to use it.  I remember being a bit confused at first about how the heck that could happen (hey, extension methods were new, cut me some slack) and it took a bit of time to track down exactly what it was that I needed to include to get that method back.  I just imagined a new developer trying to figure out why a method was missing and fruitlessly searching on MSDN for a method that didn't exist and it just didn't sit well with me. I am of the opinion that if you have an object, then you shouldn't have to include additional assemblies to get additional instance level methods out of that object.  That opinion applies to namespaces as well - I do not like it when the contents of a namespace are split out into multiple assemblies.  I prefer to have static utility classes instead of extension methods to keep things nicely packaged into a cohesive unit.  It also makes it abundantly clear where utility methods are used in code.  I will concede, however, that it can make code a bit more verbose and lengthy.  There is always a trade-off. Some people harp on extension methods because it breaks the tenants of object oriented development and allows you to add methods to sealed classes.  Whatever.  Extension methods are just utility methods that you can tack onto an object after the fact.  Extension methods do not give you any more access to an object than the developer of that object allows, so I say that those who cry OO foul on extension methods really don't have much of an argument on which to stand.  In fact, I have to concede that my dislike of them is really more about style than anything of great substance. One interesting thing that I found regarding extension methods is that you can call them on null objects. Take a look at this extension method: namespace ExtensionMethods {   public static class StringUtility   {     public static int WordCount(this string str)     {       if(str == null) return 0;       return str.Split(new char[] { ' ', '.', '?' },         StringSplitOptions.RemoveEmptyEntries).Length;     }   }   } Notice that the extension method checks to see if the incoming string parameter is null.  I was worried that the runtime would perform a check on the object instance to make sure it was not null before calling an extension method, but that is apparently not the case.  So, if you call the following code it runs just fine. string s = null; int words = s.WordCount(); I am a big fan of things working, but this seems to go against everything I've come to know about instance level methods.  However, an extension method is really a static method masquerading as an instance-level method, so I suppose it would be far more frustrating if it failed since there is really no reason it shouldn't succeed. Although I'm not a fan of extension methods, I will say that if you ever find yourself at an impasse with a die-hard fan of either the utility class or extension method approach, then there is a common ground.  Extension methods are defined in static classes, and you call them from those static classes as well as directly from the objects they extend.  So if you build your utility classes using extension methods, then you can have it your way and they can have it theirs. 

  Read the article

• Surviving MATLAB and R as a Hardcore Programmer

  - by dsimcha

  I love programming in languages that seem geared towards hardcore programmers. (My favorites are Python and D.) MATLAB is geared towards engineers and R is geared towards statisticians, and it seems like these languages were designed by people who aren't hardcore programmers and don't think like hardcore programmers. I always find them somewhat awkward to use, and to some extent I can't put my finger on why. Here are some issues I have managed to identify: (Both): The extreme emphasis on vectors and matrices to the extent that there are no true primitives. (Both): The difficulty of basic string manipulation. (Both): Lack of or awkwardness in support for basic data structures like hash tables and "real", i.e. type-parametric and nestable, arrays. (Both): They're really, really slow even by interpreted language standards, unless you bend over backwards to vectorize your code. (Both): They seem to not be designed to interact with the outside world. For example, both are fairly bulky programs that take a while to launch and seem to not be designed to make simple text filter programs easy to write. Furthermore, the lack of good string processing makes file I/O in anything but very standard forms near impossible. (Both): Object orientation seems to have a very bolted-on feel. Yes, you can do it, but it doesn't feel much more idiomatic than OO in C. (Both): No obvious, simple way to get a reference type. No pointers or class references. For example, I have no idea how you roll your own linked list in either of these languages. (MATLAB): You can't put multiple top level functions in a single file, encouraging very long functions and cut-and-paste coding. (MATLAB): Integers apparently don't exist as a first class type. (R): The basic builtin data structures seem way too high level and poorly documented, and never seem to do quite what I expect given my experience with similar but lower level data structures. (R): The documentation is spread all over the place and virtually impossible to browse or search. Even D, which is often knocked for bad documentation and is still fairly alpha-ish, is substantially better as far as I can tell. (R): At least as far as I'm aware, there's no good IDE for it. Again, even D, a fairly alpha-ish language with a small community, does better. In general, I also feel like MATLAB and R could be easily replaced by plain old libraries in more general-purpose langauges, if sufficiently comprehensive libraries existed. This is especially true in newer general purpose languages that include lots of features for library writers. Why do R and MATLAB seem so weird to me? Are there any other major issues that you've noticed that may make these languages come off as strange to hardcore programmers? When their use is necessary, what are some good survival tips? Edit: I'm seeing one issue from some of the answers I've gotten. I have a strong personal preference, when I analyze data, to have one script that incorporates the whole pipeline. This implies that a general purpose language needs to be used. I hate having to write a script to "clean up" the data and spit it out, then another to read it back in a completely different environment, etc. I find the friction of using MATLAB/R for some of my work and a completely different language with a completely different address space and way of thinking for the rest to be a huge source of friction. Furthermore, I know there are glue layers that exist, but they always seem to be horribly complicated and a source of friction.

  Read the article

• Dissing Architects, or "What's wrong with the coffee?"

  - by Bob Rhubart

  In my conversations with people in architect roles, tales of animosity, disrespect, and outright hostility aren't uncommon. And it's clear that in more than a few organizations architects regularly face a tough uphill climb. For architects with the requisite combination of technical, organizational, and people skills, that rough treatment is grossly undeserved. But tales of unqualified people in positions up and down the IT food chain are also easy to come by. So what's the other side of the architect story? Are some architects tarnishing the role and making life miserable for their more qualified colleagues? The various quotes included below were culled from a variety of sources. The criticism is harsh, and the people behind these quotes clearly have issues with architects. Still, whether based on mere opinion or actual experience, the comments shed some light on behaviors that should raise red flags for anyone pursuing a career as an architect. If you're an architect, and you've ever noticed that your coffee tastes like window cleaner, or your car is repeatedly keyed, or no one ever holds the elevator for you, maybe you need to do a little soul searching... Those Who Can, Code; Those Who Can't, Architect | Joe Winchester [May 18, 2007] "At the moment there seems to be an extremely unhealthy obsession in software with the concept of architecture. A colleague of mine, a recent graduate, told me he wished to become a software architect. He was drawn to the glamour of being able to come up with grandiose ideas - sweeping generalized designs, creating presentations to audiences of acronym addicts, writing esoteric academic papers, speaking at conferences attended by headless engineers on company expense accounts hungrily seeking out this year's grail, and creating e-mails with huge cc lists from people whose signature footer is more interesting than the content. I tried to re-orient him into actually doing some coding, to join a team that has a good product and keen users both of whom are pushing requirements forward, to no avail. Somehow the lure of being an architecture astronaut was too strong and I lost him to the dark side." Don't Let Architecture Astronauts Scare You | Joel Spolsky [April 21, 2001] "It's very hard to get them to write code or design programs, because they won't stop thinking about Architecture. They're astronauts because they are above the oxygen level, I don't know how they're breathing. They tend to work for really big companies that can afford to have lots of unproductive people with really advanced degrees that don't contribute to the bottom line. Remember that the architecture people are solving problems that they think they can solve, not problems which are useful to solve." Non Coding Architects Suck | Richard Henderson [May 24, 2010] "If a guy with a badge saying 'system architect' looks blank on low-level issues then he is not an architect, he is a business-analyst who went on a course. He will probably wax lyrical on all things high-level and 'important.' He will produce lovely object hierarchies without a clue to implementation. He will have a moustache and play golf." Architects Play Golf | Sunir Shah [August 15, 2012] "Often arrogant architects are difficult to get a hold of during the implementation phase because they no longer feel the need to stick around. Especially around midnight when most of the poor sob [sic] developers are still banging away. After all, they've already solved the problem--the rest is just an implementation exercise." Engineer vs Architect(Part of a discussion on the IT Architect Network Group on LinkedIn) "[An] architect spends his time producing white papers full of acronyms he does not understand but that impress his boss [while the] engineer keeps his head down and does the actual job." Architects Don't Code | [Author Unknown] "Faulty belief: System Architects don't need to code anymore. They know what they are talking about by virtue of the fact that they are System Architects."

  Read the article

• Drinking Our Own Champagne: Fusion Accounting Hub at Oracle

  - by Di Seghposs

  A guest post by Corey West, Senior Vice President, Oracle's Corporate Controller and Chief Accounting Officer There's no better story to tell than one about Oracle using its own products with blowout success. Here's how this one goes. As you know, Oracle has increased its share of the software market through a number of high-profile acquisitions. Legally combining companies is a very complicated process -- it can take months to complete, especially for the acquisitions with offices in several countries, each with its own unique laws and regulations. It's a mission critical and time sensitive process to roll an acquired company's legacy systems (running vital operations, such as accounts receivable and general ledger (GL)) into the existing systems at Oracle. To date, we've run our primary financial ledgers in E-Business Suite R12 -- and we've successfully met the requirements of the business and closed the books on time every single quarter. But there's always room for improvement and that comes in the form of Fusion Applications. We are now live on Fusion Accounting Hub (FAH), which is the first critical step in moving to a full Fusion Financials instance. We started with FAH so that we could design a global chart of accounts. Eventually, every transaction in every country will originate from this global chart of accounts -- it becomes the structure for managing our business more uniformly. In conjunction, we're using Oracle Hyperion Data Relationship Management (DRM) to centralize and automate governance of our global chart of accounts and related hierarchies, which will help us lower our costs and greatly reduce risk. Each month, we have to consolidate data from our primary general ledgers. We have been able to simplify this process considerably using FAH. We can now submit our primary ledgers running in E-Business Suite (EBS) R12 directly to FAH, eliminating the need for more than 90 redundant consolidation ledgers. Also we can submit incrementally, so if we need to book an adjustment in a primary ledger after close, we can do so without re-opening it and re-submitting. As a result, we have earlier visibility to period-end actuals during the close. A goal of this implementation, and one that we successfully achieved, is that we are able to use FAH globally with no customization. This means we have the ability to fully deploy ledger sets at the consolidation level, plus we can use standard functionality for currency translation and mass allocations. We're able to use account monitoring and drill down functionality from the consolidation level all the way through to EBS primary ledgers and sub-ledgers, which allows someone to click through a transaction appearing at the consolidation level clear through to its original source, a significant productivity enhancement when doing research. We also see a significant improvement in reporting using Essbase cube and Hyperion Smart View. Specifically, "the addition of an Essbase cube on top of the GL gives us tremendous versatility to automate and speed our elimination process," says Claire Sebti, Senior Director of Corporate Accounting at Oracle. A highlight of this story is that FAH is running in a co-existence environment. Our plan is to move to Fusion Financials in steps, starting with FAH. Next, our Oracle Financial Services Software subsidiary will move to a full Fusion Financials instance. Then we'll replace our EBS instance with Fusion Financials. This approach allows us to plan in steps, learn as we go, and not overwhelm our teams. It also reduces the risk that comes with moving the entire instance at once. Maria Smith, Vice President of Global Controller Operations, is confident about how they've positioned themselves to uptake more Fusion functionality and is eager to "continue to drive additional efficiency and cost savings." In this story, the happy customers are Oracle controllers, financial analysts, accounting specialists, and our management team that get earlier access to more flexible reporting. "Fusion Accounting Hub simplifies our processes and gives us more transparency into account activity," raves Alex SanJuan, Senior Director, Record to Report Strategic Process Owner. Overall, the team has been very impressed with the usability and functionality of FAH and are pleased with the quantifiable improvements. Claire Sebti states, "Our WD5 close activities have been reduced by at least four hours of system processing time, just for the consolidation group." Fusion Accounting Hub is an inspiring beginning to our Fusion Financials implementation story. There's no doubt it's going to be an international bestseller! Corey West, Senior Vice President Oracle's Corporate Controller and Chief Accounting Officer

  Read the article

• WebLogic Server Performance and Tuning: Part II - Thread Management

  - by Gokhan Gungor

  WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

  Read the article

• Future Of F# At Jazoon 2011

  - by Alois Kraus

  I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

  Read the article

• Impressions of Pivotal Tracker

  Pivotal Tracker is a free, online agile project management system. Ive been using it recently to better communicate to customers about the current state of our project. In Pivotal Tracker, the unit of work is a story and stories are arranged into iterations or delivery cycles. Stories can be any level of granularity you want, but the idea is to use stories to communicate clearly to customers, so you dont want to write a novel. You especially dont want to write a list of detailed programming tasks. A good story for a point of sale system might be: Allow managers to override the price of an item while ringing up a customer. A less useful story: Script out the process of adding a manager flag to the user table and stage that script into the deploy directory. Stories are estimated using a point scale, by default 1, 2 or 3. Iterations are then automatically laid out by combining enough tasks to fill the point total for that period of time. You have to start with a guess on how many points your team can do in an iteration, then adjust with real data as you complete iterations. This is basic agile methodology, but where Pivotal Tracker adds value is that it automatically and graphically lays out iterations for you on your project site. This makes communication and planning easy. Compiling release notes is no longer painful as it has been clear from the outset what work is going on. While I much prefer Pivotal Trackers customer facing interface over what we used previously (TFS), I see a couple of gaps. First, I have not able to make much headway with the reporting tools. Despite my complaints about TFS, it can produce some nice reports. Second, its not clear where if at all, Id keep track of purely internal tasks. Im talking about server maintenance, cleaning up source control, checking back on some code which you never quite felt right about. Theres no purpose in cluttering up an iteration backlog with these items, but if you dont track them, you lose them. Im not sure what a good answer for that is. One gap I thought Id see, which I dont, is more granular dev tasks. If Im implementing a story, Ill write out the steps and track my progress, but really, those steps arent useful to anybody but me. The only time Ive found that level of detail really useful is when my tasks are defined at too high a level anyway or when Im working with someone who needs more coaching and might not be able to finish a story in time without some scaffolding to get them going. You can learn more about Pivotal Tracker at: http://www.pivotaltracker.com/learnmore.   --- Relevant Links --- A good intro to stories: http://www.agilemodeling.com/artifacts/userStory.htmDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• disks not ready in array causes mdadm to force initramfs shell

  - by RaidPinata

  Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

  Read the article

• Ubiquitous BIP

  - by Tim Dexter

  The last number I heard from Mike and the PM team was that BIP is now embedded in more than 40 oracle products. That's a lot of products to keep track of and to help out with new releases, etc. Its interesting to see how internal Oracle product groups have integrated BIP into their products. Just as you might integrate BIP they have had to make a choice about how to integrate. 1. Library level - BIP is a pure java app and at the bottom of the architecture are a group of java libraries that expose APIs that you can use. they fall into three main areas, data extraction, template processing and formatting and delivery. There are post processing capabilities but those APIs are embedded withing the template processing libraries. Taking this integration route you are going to need to manage templates, data extraction and processing. You'll have your own UI to allow users to control all of this for themselves. Ultimate control but some effort to build and maintain. I have been trawling some of the products during a coffee break. I found a great post on the reporting capabilities provided by BIP in the records management product within WebCenter Content 11g. This integration falls into the first category, content manager looks after the report artifacts itself and provides you the UI to manage and run the reports. 2. Web Service level - further up in the stack is the web service layer. This is sitting on the BI Publisher server as a set of services, runReport and scheduleReport are the main protagonists. However, you can also manage the reports and users (locally managed) on the server and the catalog itself via the services layer.Taking this route, you still need to provide the user interface to choose reports and run them but the creation and management of the reports is all handled by the Publisher server. I have worked with a few customer on this approach. The web services provide the ability to retrieve a list of reports the user can access; then the parameters and LOVs for the selected report and finally a service to submit the report on the server. 3. Embedded BIP server UI- the final level is not so well supported yet. You can currently embed a report and its various levels of surrounding  'chrome' inside another html based application using a URL. Check the docs here. The look and feel can be customized but again, not easy, nor documented. I have messed with running the server pages inside an IFRAME, not bad, but not great. Taking this path should present the least amount of effort on your part to get BIP integrated but there are a few gotchas you need to get around. So a reasonable amount of choices with varying amounts of effort involved. There is another option coming soon for all you ADF developers out there, the ability to drop a BIP report into your application pages. But that's for another post.

  Read the article

• SharePoint For Newbie Developers: Code Scope

  - by Mark Rackley

  So, I continue to try to come up with diagrams and information to help new SharePoint developers wrap their heads around this SharePoint beast, especially when those newer to development are on my team. To that end, I drew up the below diagram to help some of our junior devs understand where/when code is being executed in SharePoint at a high level. Note that I say “High Level”… This is a simplistic diagram that can get a LOT more complicated if you want to dive in deeper.  For the purposes of my lesson it served its purpose well. So, please no comments from you peanut gallery about information 3 levels down that’s missing unless it adds to the discussion.  Thanks So, the diagram below details where code is executed on a page load and gives the basic flow of the page load. There are actually many more steps, but again, we are staying high level here. I just know someone is still going to say something like “Well.. actually… the dlls are getting executed when…”  Anyway, here’s the diagram with some information I like to point out: Code Scope / Where it is executed So, looking at the diagram we see that dlls and XSL are executed on the server and that JavaScript/jQuery are executed on the client. This is the main thing I like to point out for the following reasons: XSL (for the most part) is faster than JavaScript I actually get this question a lot. Since XSL is executed on the server less data is getting passed over the wire and a beefier machine (hopefully) is doing the processing. The outcome of course is better performance. When You are using jQuery and making Web Service calls you are building XML strings and sending them to the server, then ALL the results come back and the client machine has to parse through the XML and use what it needs and ignore the rest (and there is a lot of garbage that comes back from SharePoint Web Service calls). XSL and JavaScript cannot work together in the same scope Let me clarify. JavaScript can send data back to SharePoint in postbacks that XSL can then use. XSL can output JavaScript and initiate JavaScript variables.  However, XSL cannot call a JavaScript method to get a value and JavaScript cannot directly interact with XSL and call its templates. They are executed in there scope only. No crossing of boundaries here. So, what does this all mean? Well, nothing too deep. This is just some basic fundamental information that all SharePoint devs need to understand. It will help you determine what is the best solution for your specific development situation and it will help the new guys understand why they get an error when trying to call a JavaScript Function from within XSL.  Let me know if you think quick little blogs like this are helpful or just add to the noise. I could probably put together several more that are similar.  As always, thanks for stopping by, hope you learned something new.

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >