Search Results

Search found 4345 results on 174 pages for 'partition'.

Page 149/174 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• Problems after installing a plethora of updates

  - by box

  yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

  Read the article

• Run Win7 Guest (raw disk) in Ubuntu (which was installed as Dual Boot on existing Win7)

  - by kingdango

  I installed Ubuntu 12.10 on top of Win 7 as a dual boot (awesome!). I'm hoping to use VirtualBox to run my original Win7 instance as a guest OS under Ubuntu. I found this existing question and followed the directions to no avail. I can get the VMDK file created but when I run it I just get a blank black screen with no additional information and Windows never loads. I see no HD activity or anything that would indicate it's loading. I used this command to create the VMDK file: VBoxManager internalcommands createrawvmdk -filename ~/.VirtualBox/Win7Native.vmdk -rawdisk /dev/sda3 It looks like everything was created correctly but I just get a blank screen when I run the VM. I do get this warning when I boot the VM: VirtualBox - Warning The virtual machine execution may run into and error condition as described below... The medium '/home/XXX/.VirtualBox/Win7Native.vmdk' has a logical size of 583GB but the file system the medium is located on can only handle up to 16GB in theory. We strongly recommend to put all your virtual disk images and the snapshot folder on a proper file system (e.g. etc3) with a sufficient size. ErrorId: Fat Partition Detected Severity: Warning How can I get this working?

  Read the article

• Neverending issues with grub (ubuntu 14.04 on ASUS with Win8 dual boot)

  - by Mariana

  This is the most frustrating issue I have ever run into using Ubuntu and Windows in the same machine. I have an ASUS K46CB, 6GB RAM and preinstalled Windows 8.1 64-bits. I have successfully installed Ubuntu 14.04 LTS, also 64-bits. To do so,I followed this tutorial whenever possible. I only failed on the disable secure boot part: there is no 'Secure-boot' or even UEFI mention in my BIOS! Screenshots from other BIOS of the same model show the option under Boot, but in mine there is absolutely none. Because of this, I cannot boot into Ubuntu. The computer loads straight into Windows. I tried running boot repair, but got an error (i can show the log, but it's pretty long). Does anyone know how to fix this issue? UPDATE I reinstalled Ubuntu. Same problem, goes straight to Window. Boot-Repair informs me that i am using Windows in Legacy mode. It excecuted with no errors this time, but after restarting GRUB was still missing. I can't turn off Secure Boot yet. UPDATE I tried using Boot Repair to install grub on a boot-grub 1mb partition. Still boots straight to windows. I feel like punching something

  Read the article

• 2 folders in Sys/Class/Backlight?

  - by zebrapie

  ISSUE: Backlight brightness does not change. More Detail: Brightness will not change, using both 'System Settings-Screen', or FN keys (Brightness bar shows and moves, but screen brightness does not change). Notcied a post in this thread (http://ubuntuforums.org/showthread.php?t=1866283) about having multiple folders in Sys-Class-Backlight... I HAVE TWO FOLDERS TOO! 'intel_backlight' and 'acpi_video0' Using the function keys, alters the value in the acpi_video0's 'Brightness' file - But doesn't actually alter the brightness of the screen. If I add 'backlight=vendor' in Grub, my function keys then edit the value in the 'Intel_Backlight brightness file. - But again doesnt actually change the brightness of the screen. Computer: Fujitsu Siemans Pi2515, Intel Integrated Graphics, No hdd partition. Already Tried: -Editing grub to contain: acpi_osi=Linux acpi_backlight=vendor -http://ubuntuguide.net/change-screen-brightness-with-fn-key-in-ubuntu-11-0410-10 -sudo apt-get install acpi -$ sudo setpci -s 00:02.0 F4.B=20 -Brightness does not adjust in fallback mode either. -Reinstalling OS, Using Linux Mint (Same problem). -Upgrading and downgrading BIOS. Many thanks for reading, I understand this problem may need a bit of a Linux pro to sort. If anyones up for the challenge i'll spend any amount of time being walked through this, posting results. Don't want to give up here!

  Read the article

• Ubuntu 12.04 takes too long to boot

  - by msPeachy

  I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

  Read the article

• Velvet screen after grub selection

  - by Spleen

  After a fresh install of Ubuntu 11.10 64-bit, the boot seems to stop after selecting the ubuntu option (same with the rescue one) in the grub menu. At first I thought this was related to grub-efi, as I've had similar problems after a Ubuntu 11.04 update which replaced grub-efi with grub-pc and got me stuck on a "elf magic" grub console (https://bugs.launchpad.net/ubuntu/+source/apt/+bug/800910). While the 11.04 problem was resolved with a simple chroot and apt-get install from the live cd, that solution doesn't work this time. The drive with the bootloader is a sata3 ssd with 64 gb gpt (sdb1 20 mb efi boot partition fat16, sdb2 60 gb root ext4 and sdb3 4 gb swap) on a msi e350ia-e45 mainboard with a pair of 2 TB ext4 mbr drives for photos/music/movies. I've tried a few grub-install/update-grub with boot-directory sdb1 from chroot, but I cant seem to go anywhere. Even this guide: http://en.gentoo-wiki.com/wiki/Grub2#EFI (ofc I replaced grub2 with grub in the grub-install and efibootmgr commands) doesnt seem to get me anywhere. Any help or ideas are appeciated ;) edit: I guess its the combination of gpt/uefi that also seems to haunt f16 edit: same with 12.04 beta btw

  Read the article

• How to mount drive in /media/userName/ like nautilus do using udisks

  - by Bsienn

  As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

  Read the article

• Unable to log in due to freeze, occasional error message

  - by Xianlin Xiong

  I'm new to Ubuntu. And I have some problems now. I downloaded Ubuntu 11.10 and burned it onto a CD. Then I load it in my conputer, it's easy. But when I finished those and restarted the computer, the problem comes: After I choose to log in the Ubuntu system,the screen stays in pink, and it can't jump into (about 30 min), and then I have no choices but to press Ctrl+Alt+Del to reboot. Another time I choose Ubuntu to log in, it shows on the screen that "BusyBox v1.18.4 ...... built-in shell ...... initramfs". However the Live CD works very well. What’s more, there is a Windows 7 partition on the hard drive. (Windows 7 is also okay.) But I leave more than 20GB on the hard drive to Ubuntu. When I installed Ubuntu, I only made two partitions (swap and /). I don’t know where the problems happened and how to deal with them. And I hope someone can help me out with the troubles.

  Read the article

• Booting off a ZFS root in 14.04

  - by RJVB

  I've been running a Debian derivative (LMDE) on a ZFS root for half a year now. It was created by cloning a regular ext4-based install with all the necessary packages onto a ZFS pool, chrooting into that pool and recreating a grub menu and bootloader. The system uses an ext-3 dedicated /boot partition. I would like to do the same with Ubuntu 14.04, but have encountered several obstacles. There is no Trusty zfs-grub package The default grub package doesn't have ZFS support built in. I found a small bug in the build system responsible for that (report with patch created) and built my own grub packages. The built-in ZFS support is dysfunctional, it does not add the proper arguments to the kernel command line I thus installed the ZoL grub package I also use on my LMDE system, which does give me a correct grub.cfg However, even with that correct grub.cfg, the boot process apparently doesn't retrieve the bootfs parameter from the ZFS pool; instead the variable that's supposed to receive the value remains empty. As a result, initrd tries to load the default pool ("rpool"), which fails of course. I can however import the pool by hand, and complete the process by hand. If memory serves me well, I also had to disable apparmor, to avoid the boot process from blocking after importing the pool. Am I overlooking something? Just for comparison, I installed the Ubuntu 3.13 kernel on my LMDE system, and that works just fine (i.e. the identical kernel and grub binaries allow successful booting without glitches on LMDE but not on Ubuntu).

  Read the article

• Ubuntu install can't find hard drives

  - by Casey Hungler

  I recently got a Dell Inspiron Special Edition 7720 computer. I am trying to install Ubuntu along side Windows. When I use the WUBI installer, the installation of Ubuntu works as long as I do not boot into Windows; if I boot into Windows, when I go back into Ubuntu, I am given a variety of error messages which claim to have corrupt or missing kernel/root directory, etc. I have been working with this problem for about a week, and have reinstalled Ubuntu MANY times. So far, I have eliminated all of the following problems: Corrupt WUBI installation (Downloaded multiple times, used on other systems), I have tried using a CD and a flash drive, both of which work on other computers. I know that no program within Ubuntu is creating the problem. I know that others have successfully installed Ubuntu on a computer with my operating system (Windows 7 SP1). This is a much shortened version of the original question, which has been up for about 5 days, and included a more detailed description of the problem, but left everyone clueless as to the source of this problem. When I spoke with the Dell service technician who came over today to replace my keyboard, he suggested that the driver for my HDD was so new that it was not compatible with the current version of Ubuntu. His reasoning is as follows: 1) During an install from a flash drive or CD, where I am supposed to get the option to wipe my system or create a dual boot, I get a window that asks me to select a hard drive partition, but none are listed. 2) This model of computer was made public in June of this year, while Ubuntu was released in April Adopting this theory, it would seem to me that the WUBI install fails after booting into Windows because Ubuntu can no longer find the files that it needs to load. Does this theory seem at all plausible to anyone? I just want to install Ubuntu and have it stay on my computer. I don't care how I put it there, I just need it to work, so I would TRULY appreciate any advice or suggestions anyone could give. Thanks so much for your time and support!!!

  Read the article

• Strange traffic on fresh Ubuntu Server install

  - by Fishy

  I've just installed Ubuntu Server on my home box after becoming partially familiar with it at work and wanting to train up as a Pen Tester. I installed the latest version on a logical partition (the main one contained Win7), and selected none of the extra modules (I think). I installed ngrep and fired it up (along with TCPdump) and immediately saw some strange traffic which I am unable to identify. My pc is sending out UDP packets every couple of seconds to a seemingly random series of IP addresses, all on the same port (47669 - though I did also see it use another port for a while). I watched it do this for about 20 mins, whilst trying to work out why it was doing it. The only other traffic was the odd ARP request for the router and SSDP UPnP broadcasts from the router. Anyone know what this is, or have any advice on how best to find out? Thanks. EDIT: Actually, it's not my box generating the traffic. It's receiving the traffic on that port, from a series of IP addresses, and returning 'port unreachable' messages.

  Read the article

• Can't start system due to mdadm failing

  - by user101212

  I used to have a 5-disk RAID5 partition, all working very well. I have then decided to add 3 more disks on it, totaling 8 equal disks. I've opened Webmin and just asked to add the disks. Then I've realized the three disks had NTFS partitions, wich mdadm didn't complain, so I tried to stop the growing to remove the Windows partitions. I've tried to remove a disk using the same Webmin, but (as you might guess and call me fool...), the system became unstable. By restarting the system, I've started receiving these messages: "udev[126]: timeout: killing '/sbin/mdadm --incremental /dev/sdh1' [311]" "udev[124]: timeout: killing '/sbin/mdadm --detail --export /dev/md0' [316]" I've formated the system disk, hoping to get a system up and running. I did that with all RAID disks disconected, so everything was fine. I then reconnected the disks, wich was also ok. And finally installed mdadm using apt-get. By reboot, the system has found the mdadm intention of growing the system, so the same messages appear again. I other words: I can't even reach a command prompt to do something. Any ideas of what to do? I believe I could turn off the system, disconnect the disks and look for the mdadm.conf file. Would that be a good idead? I'm no Linux expert, so I'm really lost here.

  Read the article

• I have Ubuntu only and need to install Windows

  - by Terzuz

  I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

  Read the article

• Ubuntu 14.04 LTS 64-bit install alongside Windows 7

  - by user289222

  I've tried installing Ubuntu 14.04 LTS alongside my Windows 7 OS, following the exact procedure given by the Ubuntu website and random other tutorials. I've tried with a LiveCD and with a USB stick but I always run into the same problem. When I'm at the screen where I'm allowed to select how I want to install Ubuntu ("alongside", "erase Windows 7", "something else"), the first option says "Install Ubuntu inside Windows 7" instead of "Install Ubuntu alongside Windows 7". From pretty much all tutorials I've seen, the tutorial says that the option should say "alongside". I click "inside" anyway, and Ubuntu doesn't install at all. Instead, my computer just reboots, and goes back to the Try Ubuntu or Install Now screen. This happens regardless of using a LiveCD or a USB stick. I've also tried manually resizing my partitions using "something else". Oddly, I see 4 sda partitions: /dev/sda type size used /dev/sda1 1mb unknown Windows 7 (loader) /dev/sda2 ntsf 208mb unknown Recovery Windows Environment (loader) /dev/sda3 ntsf ~752000mb unknown Recovery Windows Environment (loader) /dev/sda4 ~18000mb unknown I try resizing the largest partition, but some sort of internal error occurs and it doesn't let me resize my partitions. Any ideas on what's going on and how to solve it?

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• raid advice with SSD and two HDD

  - by Nin

  I have a new machine with one 128GB SSD and two 1TB HDD. On the SSD is the OS and my initial thought was to put the two HDD in RAID 1 for user data. After some more thought I came up with two other setups and now I'm in doubt :) Can someone advise what would be the best setup? 1: single SSD and HDD in RAID 1 (original thought) 2: Create 2 partitions on the HDD (128GB and 872GB). Put the two 872GB in RAID 1 and create another RAID 1 with the SSD and one 128GB HDD partition. 3: Create 2 partitions on the HDD (750/250), put the 705GB in RAID 1 and use the 2 250GB as backup and make automatic snapshots of the SSD to (one of) these partitions. I think the 2 main questions are: Is it advisable to create a raid array with only part of a drive and actively use the other part of that drive or should you always use the full disk? Is it advisable to create a raid 1 array with a SSD and HDD or will that blow the whole speed advantage of the SSD?

  Read the article

• Dual boot problem with ubuntu 12.04 and Vista

  - by vendella dahlahdoo

  Greetings from New Zealand. I have installed Microsoft Windows Vista and then installed Ubuntu 12.04 on my refurbished Compaq nx8220 laptop. I get the following infamous head hurting prompt continually. error: no such partition. grub rescue> Have tried most of the common recommended solutions. Live-CD then install Boot-Repair through the Terminal didn't work. It repaired all the linux stuff when restoring grub and then can't boot into Windows Vista. When I use Boot-Repair to fix the MBR, then I can't boot into Ubuntu. Tried installing BCD 2.1 in Vista and tried all the options one after another in BCD. Still no Ubuntu when selected through the options menu from BCD on restart/reboot. I have tried the boot repair option on the Ubuntu server CD-ROM, tried installing earlier versions of Ubuntu 11.04, 11.10, and Ubuntu server 11.10 and 12.04. Still the same result. I tried deleting the Ubuntu partitions through Vista a number of times and reinstalling Ubuntu. I have been trying and retrying all the options in Boot-Repair in different combinations for the past week and a half. I have tried at least 10 times installing and reinstalling Ubuntu. I really love Ubuntu and believe I have exhausted most of the recommended solutions and have spent too much time on this. Its driving me nuts!! please can someone help, I have finally given up (sigh). The following are some outputs from Boot-Repair from my last attempts. http://paste.ubuntu.com/1019227 http://paste.ubuntu.com/1019264 I was only allowed to post two links being a newbie. The only thing left for me to do is the flying Samoan dropkick laptop trick. Thanks in advance. Francis.

  Read the article

• Re-installing Ubuntu without losing files, how to?

  - by moraleida

  Sometime back i bought a second PC to serve as my backup machine, but i've never managed to have it as i would like. Now i want to start over, but i've messed so much with it's disks that i'm kinda afraid to lose something on the way, thus this question. Right now, I have a 1Tb disk partitioned like this (as per GParted): /dev/sda1 (ext4) 346.12Gb - Is almost full, has an old install of Ubuntu 11.10. It no longer boots, ever since i installed Windows7 on /sda3. Everything that matters to me is tucked into /var/www/ all the rest can just go. /dev/sda2 (ext4) 196.45Gb - has an old install of 12.04 and nothing important, it's pretty much empty and also doesn't boot. /dev/sda3 (ntfs) 377.97Gb - is my boot partition with Windows 7, some important files and I'd like to keep it untouched. /dev/sda4 (extended) 10.97Gb - was created when i first installed Ubuntu, i think. In my ideal world, I'd like to safely reinstall Ubuntu from the 12.04 liveUSB and merge sda1 and sda2 without losing any files. Is that possible? How?

  Read the article

• Default mount options on auto-mounted NTFS partitions (how to add `noexec` and `fmask=0111`?)

  - by jetxee

  I use auto-mounting of external USB devices, and it works as expected, except that NTFS partitions are mounted with executability flag on. For example: /dev/sdb1 on /media/Elements type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) All normal files are -rwxrwxrwx on this partition. I am not happy with the xs. I know I can have it mounted the way I want if I pass the fmask=0111 option. Now I use Lucid, and suppose it uses some new auto-mounting mechanism (gvfs-mount?), but I don't really know how the default mounting options can be changed now. Gconf settings in /system/storage/default_options/ntfs/mount_options have no effect. So, how do I make fmask=0111 the default automounting option for all NTFS partitions? (I'd be grateful also if someone explains how the current automounting mechanism works, how to configure it, and if the default mounting options are hard-coded, what I have to recompile to change them). I know that I can put a line in the /etc/fstab and/or mount manually, but this is not the solution I want, because 1) I don't want to edit /etc/fstab for each and every external drive I use, 2) fstab records appear in the Places pane of Nautilus, even if the drives are not present. The questions is how to change the defaults.

  Read the article

• ubuntu boots only with usb

  - by klimat

  Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

  Read the article

• How do I add a boot from cd option to yaboot?

  - by Sergiu

  So I'm dual-booting Ubuntu 12.04.1 on my iMac G5 powepc alongside Mac OS X and I want to add a boot cd option to yaboot because I'm trying to boot a scratched Mac OS X installation DVD that takes a while to read and the frst bootstrap moves on too fast. How do I edit the timeout for the first bootstrap anyways? So, my main question is, how do I add a cd booting option to yaboot and then, how doI boot it? The devalias from OpenFrmware tells me that 1 have 2 cd-rom instaled, on is /ht/pci@3/ata-6/disk@0 and the other on ends with a 1 instead of a zero. These are the contents of my yaboot.conf file: yaboot.conf generated by the Ubuntu installer run: "man yaboot.conf" for details. Do not make changes until you have!! see also: /usr/share/doc/yaboot/examples for example configurations. For a dual-boot menu, add one or more of: bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ boot="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part2" device=/ht@0,f2000000/pci@3/k2-sata-root@c/@0/@0 partition=4 root="UUID=798a048f-ee48-49e0-bba3-111aed8dee04" timeout=12000 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot enablecdboot macosx="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part3" image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="quiet splash" What do I add here so that yaboot will boot from my cd in like 3 minutes after startup? Thanks!

  Read the article

• Not recognized as operating system on startup

  - by mastabruce

  I am new to Ubuntu and just decided to install it in (on my new lenovo thinkpad) in addition to my windows 7 operating system. Now, whenever I reboot the computer, it only runs window 7. I went (in windows) to Control Pannel ? System ? Advanced Settings ? Startup and Ubuntu is not even listed as a choice for operating system. I tried installing ubuntu again, but now it wants to partition the already partitioned windows folder. I can't figure out how to get Ubuntu, which seems to be installed, to run. I saw on another question here that I could be able to edit my mrb settings using EasyBCD but I can not figure out how to choose ubuntu as an operating system. My disk is already partitioned (seen from the attempted second install) so I'm pretty sure it is on the disk. Basically, how can I get ubuntu to run when I can't choose it as an operating system? Thank you for your help.

  Read the article

• Can't install on a Thinkpad W700ds

  - by Habstinat

  I want to install Ubuntu on my computer. I don't know much about Linux, but I know my way around a terminal and whatnot. My computer, a ThinkPad W700ds, refuses to read from my CD when booting. The md5sum is correct and the same CD boots fine from another computer. When I try to install from a USB, I can get the main screen, but when I select any of the options from there my screen turns black for more than 3 hours until I have to turn it off. Is there anything I can do about this? I want to have a true partition, don't want a Wubi'd install. It's a 10.10 x64 image, but my computer is 64 bit (running Windows 7 x64 right now) and the exact same CD is bootable on other computers. I've been on #ubuntu IRC for days trying to work this out but nobody knew, so I figured I would get more responses by posting to here. UPDATE: Thanks Jorge Castro. Both the alternate and desktop installers seem to not work at all with the CD. On a USB, the alternate installer lets me start installing, but in the middle of installation I get this message. The people on #ubuntu told me to just exit installation at that point, so I did.

  Read the article

• My new hard drive won't automount on boot

  - by user518

  I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >