Search Results

Search found 9596 results on 384 pages for 'remote assistance'.

Page 149/384 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• RHEL 5/CentOS 5 - sshd becomes unresponsive

  - by ewwhite

  I have a number of CentOS 5.x and RHEL 5.x systems whose SSH daemons become unresponsive, preventing remote logins. The typical error from the connecting side is: $ ssh db1 db1 : ssh_exchange_identification: Connection closed by remote host Examining /var/log/messages after a forced reboot shows the following leading up to the restart: Dec 10 10:45:51 db1 sshd[14593]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:02 db1 sshd[14595]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:54 db1 sshd[14711]: fatal: Privilege separation user sshd does not exist Dec 10 10:47:38 db1 sshd[14730]: fatal: Privilege separation user sshd does not exist These systems use LDAP authentication and the nsswitch.conf file is configured to look at local "files" first. [root@db1 ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # passwd: files ldap shadow: files ldap group: files ldap hosts: files dns The Privilege-separated SSH user exists in the local password file. [root@db1 ~]# grep ssh /etc/passwd sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin Any ideas on what the root cause is? I did not see any Red Hat errata that covers this.

  Read the article

• Accessing A Shared Directory That Has An Account White List

  - by Xan

  I'm on a LAN here at work and I have my desktop sharing some of my project folders. I can access the computer via \\ComputerIP\, but I can't actually open any of the folders. Upon attempting, I get the error: Windowns cannot access \ComputerIP\ProjectFolder You do not have permission to access \ComputerIP\ProjectFolder. Contact your network administrator to request access. For more information about permissions, see Windows Help and Support Now, this is understood considering I've made it so that you had to utilize the "Project" credentials to connect. I have a user account on my main computer hosting these shared folders that gives full access to the folders if you are this "Project" user. I can Remote Desktop the computer just fine from my laptop using either set of credentials. When I try to open these folders it doesn't give me the option to attempt to apply any credentials like it does when I remote desktop. How am I supposed to gain access to these folders?

  Read the article

• Managing Active Directory Group Membership with a Non-Administrator Account In Server 2008

  - by Laranostz

  I am running Server 2008 R2 in an Active Directory Domain Environment. I have created a group in Active Directory and I have delegated management authority to that group to a user. I want this user to be able to add and remove accounts as needed from that group so that they are exercising some measurement of control without giving them other authority. When I have the user attempt to access the Active Directory Users & Computers Console it prompts them for Administrator credentials. They are using Remote Desktop to access the server, because they do not have Windows 7, and firewall rules prevent using the Remote Management Kit. I do not want to provide them with any level of Administrative rights except the minimum required for them to add/remove users from this group. There are two servers that 'talk' to each other in this isolated environment, a domain controller and a member server, both are only reachable through RDP. Any suggestions?

  Read the article

• Socat and rich terminals (with Ctrl+C/Ctrl+Z/Ctrl+D propagation)

  - by Vi

  socat - exec:'bash -li',pty,stderr,ctty - bash: no job control in this shell What options should I use to get fully fledged shell as I get with ssh/sshd? I want to be able to connect the shell to everything socat can handle (SOCKS 5, UDP, OpenSSL), but also to have a nice shell which correctly interprets all keys, various Ctrl+C/Ctrl+Z, tab completion, up/down keys (with remote history). Update: Found "setsid" socat option. It fixes "no job control". Now trying to fix Ctrl+D. Update 2: socat file:`tty`,raw,echo=0 exec:'bash -li',pty,stderr,setsid,sigint,sane. Not it handles Ctrl+D/Ctrl+Z/Ctrl+C well, I can start Vim inside it, remote history is OK.

  Read the article

• ISA Server Route Add Question

  - by Kip

  Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

  Read the article

• Microsoft Word Document Recovery seems unresolvable

  - by LarsTech

  We work on a server (Windows Server 2003 Enterprise) that a bunch of us developers remote in using Remote Desktop Connection, and now every "other" time I open up word I get this Document Recovery pane: As you can see, "Delete" and "Show Repairs" are disabled (I don't think this is my document). "Open" or "Save As" works, but it never marks this document recovered, it just keeps coming up every "other" time I open up word. I don't even care about this document. How can I remove this document from the list so that it doesn't come up anymore? Update: As per Moab's comment, I had the user delete the file. But the Document Recovery still shows up with that item every other time Word is opened. The only difference now is that clicking on "Open" produces this (obvious) message: How can I clear this list? BTW, the user that owned this document was never getting the Document Recovery pane.

  Read the article

• Eliminating Duplicate Printers on Print Server 2008 R2

  - by user123247

  I added a print server role to our new 2008 R2 server and started adding printers to it that will be available to Remote Desktop sessions. When I added the Remote Desktop services role, I specified printer redirection, thinking that would be a good thing. On the PCs where I am testing all this, I added the network printers locally so that they would have the printer available for local use. When I logon to the 2008 R2 server, I notice that the printers I added are out there twice... once on the 2008 R2 server and an additional time redirected from my PC. Is there some way to eliminate this duplication w/o eliminating redirection?

  Read the article

• Run application or script on Windows RDC connection

  - by NickLarsen

  I checked this thread, but it did not solve my exact problem. I need to run a script on when a connection is made across my network using windows remote desktop connection. The thread listed above works for the initial login, however, if I don't log out (which is necessary for some processes running on my network), then it wont run the script again the next time someone connects to the system using remote desktop connection. Previously we were using pcAnywhere to achieve this, however after running into some graphical issues with pcAnywhere, we have decided to move away from it to RDC. For a little more information, we need to have an email sent out anytime a connection is made to particular machines. The login name will always be the same for those systems and we do not log off when closing the connection.

  Read the article

• Windows SBS 2008 and DNS issues

  - by Pino

  Hey, We have a windows 2008 SBS, roughly every couple of days no machine on the network can access sites such as google/msn/bbc etc. Its solved easily by rebooting the DNS on the server, however this obviously should noy happen, can anyone suggest a reason or offer debugging assistance?

  Read the article

• Is there a serious issue with setting the SUID bit on tcpdump?

  - by Dean

  I'm running tcpdump on a remote machine, and piping the output to Wireshark on my local machine over SSH. In order to do this, I had to set the SUID bit on tcpdump. For background, the remote machine is an Amazon EC2 running "Amazon Linux AMI 2012.09". On this image, there is no root password, and it is not possible to log in as root. You can't use sudo without a TTY, and therefore you have to set the SUID. What are the practical risks of setting this bit on tcpdump? Is there any need to be paranoid? Should I unset it whenever I'm not capturing?

  Read the article

• Running command transparently over ssh

  - by jnsg

  By transparently I mean forwarding of: stdin, stdout and stderr standard signals (SIGHUP or SIGINT would be great for a start) As an example, consider these invocations of a (pointless) local and remote command: $ `cat - > /dev/null; sleep 10` < /local/file $ ssh user@host "cat - > /dev/null; sleep 10" < /local/file I can interrupt the first one with ^C just fine. But if I try this during the second one it only affects ssh, leaving the command running on the remote server if cat has already finished. I know about launching sshwith -t, but this way I can't send data via stdin. Is this possible with ssh alone at all?

  Read the article

• How to prevent ssh git push to set file ownership?

  - by e-satis

  I have a remote bare git repository on an Ubuntu server, where the file are owned by the user my_project and the group my_project, with permissions set accordingly. All commiters are themself in the group my_project. When somebody commit then push from my Ubuntu laptop with the user my_user to the server via SSH, some files in the remote repository are created (updated?) so they now belong to the user and group my_user. Of course, when somebody else want to commit, he is now unable to do so because he doesn't have write permissions. I could set permission to 777 but it's not the best option. Is there any way I can solve this problem while keeping restricted write permissions.

  Read the article

• Providing reverse records for records that map to ISP IP

  - by thejartender

  I have been instructed to use my ISP ip (as a temporary fix for mapping my name server and domain records as my router dishes out rfc 1918 adresses to devices in my network where I am running an Ubuntu server, my router and my development laptop andso I have fixed: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. To a temporary version of: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 88.89.190.171 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 88.89.190.171 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. I am using bind and when using named-checkzone on this file according to my zone configurations, this file has no errors. I then run dig thejarbar.org @88.89.190.171 and get an expected authorative reply. My issue is creating my reverse DNS SOA zone and I would gratly appreciate assistance and guidance. I am stuck on how to represent the reverse records correctly for the eddresses that map to my isp IP. I am trying: $TTL 3H 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 171.190.89.88. IN PTR thejarbar.org. 171.190.89.88. IN NS ns.thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. www IN PTR www.thejarbar.org. But running named-checkzone on this file leaves an erroneous return that IN: has no NS records I would greatly appreciate assistance

  Read the article

• Can't reconnect to my RDP session

  - by Jeremy Stein

  I use a VM through RDP. When I'm done for the day, I just disconnect the session and reconnect in the morning. That allows me to pick up what I was doing and not close all the applications. As I'm the only user, this generally works well. Today, I can't reconnect to my session from yesterday. When I RDP, I get a new session. When I run query user, I can see my other session: USERNAME SESSIONNAME ID STATE IDLE TIME LOGON TIME me rdp-tcp#82 1 Active 15:00 4/22/2010 9:00 AM me rdp-tcp#91 2 Active . 4/30/2010 9:00 AM If I try to use Terminal Services Manager to remote control the other session, I get this error: Session (ID 1) remote control failed (Error 7044 - The request to control another session remotely was denied. ) Is there any way to reconnect to this session, or do I need to just kill it?

  Read the article

• gnu screen - mouse does not work in nested screen session

  - by Matthew

  I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

  Read the article

• cygWin connect by SSH using RSA key; ssh.exe couldn't create /home/user/.ssh

  - by Kirzilla

  Hello, I'm using Win XP and I'm trying to connect by SSH to remote host using RSA key. I've investigated that cygWin recognizes Documents and Settings dir as home directory Z:\app\cwRsync\bin>cygpath -H /cygdrive/c/Documents and Settings I've created .ssh directory in Documents and Settings/user/.ssh and moved known_hosts, id_rsa, id_rsa.pub there. Now, I'm trying to connect via ssh.exe to remote host Z:\app\cwRsync\bin>ssh -p 22 [email protected] Could not create directory '/home/user/.ssh'. The authenticity of host '[remotehost.com]:22 ([remotehost.com]:22)' can't be established. RSA key fingerprint is f7:f4:2c:e0:c6:7e:d2:a4:45:70:63:df:bf:f2:84:46. Are you sure you want to continue connecting (yes/no)? What I'm doing wrong? Why ssh.exe couldn't create directory /home/user/.ssh? Thank you.

  Read the article

• IMAP can't access virtual account sharing name with local user account

  - by chernevik

  I am setting up a postfix/dovecot mail server with virtual accounts, per the Chris Haas tutorial. I'm finding that virtual users who also have local user accounts on the mail server cannot access their email remotely via IMAP. They're told they cannot login. (I'm using Thunderbird for that). These same users can login when emulating IMAP locally via telnet. Virtual users without local accounts have no trouble with IMAP access from remote clients. These local user accounts have vestiges of prior efforts in their home directories: mbox files, Mail and mail directories. I've looked at the logs for clues to where the remote login process is failing (dovecot authentication failure? confusion over where emails are stored?) but found nothing helpful. I haven't found much in the dovecot or postfix documentation that describes the IMAP login process and expectations in enough detail to help me diagnose this. So: how do I go about identifying the problem and researching a solution?

  Read the article

• default gateway of a host

  - by varun

  if my understanding is correct, the following is what happens when a host A wants to communicate with a machine X outside its network. 1) The host ,checks it routing table to find out if there is any direct routes to the machine. 2) It finds out that the machine is outside its network and has to sent the packets to the default gateway(router) R. 3) The host sents an ARP broadcast to get the mac of the router R. 4) After getting the MAC, the host creates a packet with src IP and MAC as that of the host A, dest IP of the remote machine X and dest MAC of the router R. 5)The router R receives the packet, either drops its or sents its to its next hope, which can be another router or the remote machine X itself. Can anyone explain, how the steps would be, if i set the default gateway of the host A as host A itself...?

  Read the article

• 401 - Unauthorized On Server 2008 R2 IIS 7.5

  - by mxmissile

  I have a web application deployed to Server 2008 IIS 7.5 box. From remote it gives this error: 401 - Unauthorized: Access is denied due to invalid credentials. (remote = desktops on the same LAN) Have tried several remote clients using different browsers, all the same result. (IE, FF, and Chrome) Hitting the application from the desktop of the server itself works flawlessly. However I have not tried Firebug on the server desktop. I would assume it's still issuing a 401 status code yet returning the content anyway. See Update #2. The application is using Anonymous Authentication. The application is written in .NET 4.0 Asp.Net using the MVC framework. Static content works fine, example: http://server.com/content/image.jpg Sysinternals procmon returns these 2 results for each request: FAST IO DISALLOWED and PATH NOT FOUND. I have 2 other MVC apps running fine on the same server. I have checked the security on the folders and they all match. App runs fine on a Server 2008 IIS 7.0 box. Nothing shows up in the Event log on the server related to this. Pulling my hair out here, any troubleshooting tips? UPDATE #1: This just get's more WTF as I dig. If I click on the Application in IIS Manager - Error Pages - Edit Feature Settings select Detailed Errors, the app works remotely. Not leaving this on, so problem is not solved yet, its just more confusing. UPDATE #2: Using Firebug, I see that the Status is still 401 Unauthorized, but the Response is returning the application's correct HTML. UPDATE #3 Playing around with Failed Request Tracing, here is the WARNING Request Trace that is causing the 401: ModuleName ManagedPipelineHandler Notification 128 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode The operation completed successfully. (0x0) Update #4 Regular IIS log is showing this: #Software: Microsoft Internet Information Services 7.5 #Version: 1.0 #Date: 2010-07-20 19:17:22 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken 2010-07-20 19:17:22 10.10.1.10 GET /Purchasing/Home - 80 - 10.10.1.12 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US;+rv:1.9.2.6)+Gecko/20100625+Firefox/3.6.6 401 0 0 4414

  Read the article

• Windows Storage Server 2008 hangs at logon

  - by ErJab

  We have a Dell PowerVault NX-3000 server running Windows Server 2008. Every now and then, when I try to login, the server seems to hang at the Welcome screen after I type in the password. However, all other services on the server are running fine - users are able to print off the print server and access their files. It just won't let me login. Any idea why this is happening? P.S.: I can't look at the server logs, because it won't let me login in the first place. Remote administration is also disabled on the server, so I can't use Remote Administration tools to look at the logs.

  Read the article

• App to log network user's file activities

  - by Luke

  My employer recently purchased a Mac Pro server (2011 model) and we've installed OSX Lion Server from the Mac Appstore. I'm definitely no server admin, but I have been tasked with finding out the following: Can we monitor or log what users do? (ie, open a file, copy a file.... or file-related tasks) Can we stop files from being copied? Or be alerted when this does occur? Thanks in advance for any assistance.

  Read the article

• create print server port via command line error Win 8

  - by Benjamin Jones

  I need to create a Print Server Port via commandline in Windows 8 Per Google search I should be using prnport.vbs script to do so: cscript c:\Windows\System32\Printing_Admin_Scripts\en-US\prnport.vbs -a -s \\192.168.113.253 -r Xerox_192.168.113.253 However I get this error: ** Unable to connect to WMI service Error 0x800706BA The RPC Server is unavailable. ** I looked at local services and both RPC and WMI services are started . Also I made sure add remote admin rule to Windows Firewall via command line without success!: netsh advfirewall firewall set rule group="windows management instrumentation (wmi)" new enable=yes netsh advfirewall firewall set rule group="remote administration" new enable=yes NOTE: If I use the GUI to create the print server port then add the printer via command line: rundll32 printui.dll,PrintUIEntry /if /b "Xerox WorkCenter 7535" /F C:\Windows\Inf\WC7545-7556_PCL6_x64_Driver\x2DNORX.inf /r "Xerox_192.168.113.253" /m "Xerox WorkCentre 7535 PCL6" THE PRINTER IS SUCCESSFULLY ADDED. So its NOT the printer it self! So how can I successfully add a print server port via command line? Thanks

  Read the article

• Install Nod32 antivirus silently?

  - by IT Tech

  Hi guys/gals, I was hoping that I could find someone on here that may know if it is possible to install Nod32 on a client PC silently. We have some software that will copy the MSI to the remote PC and run it with any specified parameters. The software needs you to import the license key file and tell it where the server is. Is there any way that these details can be pre specified so the user doesn't have to have any interaction on the remote computer. Many thanks in advance.

  Read the article

• Resolving CloudFlare DNS related mail delivery problems

  - by Andy Castles

  I recently started using CloudFlare and am having a few teething problems. Our domain is netlanguages.com and while we have a lot of sub-domains listen, we are currently only trialling a few of the servers through the CloudFlare CDN (for example, www.netlanguages.com is enabled for CDN, netlanguages.com is not). The actual CDN service seems to be reliable, but the problem that we are having is with DNS, and specifically with mail delivery. The background is that we have contact forms on our web site which use PHP mail() to send the details to end-users' email addresses, with the "from" address of the messages being [email protected] which is a valid address on our mail server. Most of the mails are arriving correctly, but a few specific people are not receiving them. The webserver uses qmail to deliver the messages, and the qmail log files show us some of the errors that the receiving mail servers return when they reject the mail delivery attempt. Two examples: Connected to 94.100.176.20 but sender was rejected./Remote host said: 421 DNS problem (interdominios.netlanguages.com). Try again later Connected to 213.186.33.29 but sender was rejected./Remote host said: 451 DNS temporary failure (#4.3.0) From what I can tell, the receiving SMTP server is doing a DNS lookup of some description on either the host of the "from" email address (netlanguages.com) or the server name given in the EHLO command of the SMTP conversation (in the first example above, interdominios.netlanguages.com), both of which should resolve to non-CloudFlare IP addresses. I've read that the CloudFlare DNS service is very reliable and fast but both of the problems above seem to point to a problem with remote servers unable to do DNS lookups. I should also point out that we changed our DNS to CloudFlare on 6th Feb, and since then started experiencing these mail delivery problems. On 22nd Feb we moved our DNS away from CloudFlare to see if the issues were related to CloudFlare and after a few hours delivery began to work. Then on 26th Feb I moved the DNS back to CloudFlare again and delivery problems started again. The issues definitely seems to be related to DNS, but I don't know if it's a configuration issue, or something else. Finally, I should say that our two DNS MX records point to non-CDN A record IP addresses, interdominios.netlanguages.com (the web and qmail server) also points to a non-CDN A record IP address. Does anyone know what the problem could be here? Any light you can shed on this will be most appreciated. Many thanks, Andy

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >