Search Results

Search found 59272 results on 2371 pages for 'time stamp'.

Page 149/2371 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• How to keep the trunk stable when tests take a long time?

  - by Oak

  We have three sets of test suites: A "small" suite, taking only a couple of hours to run A "medium" suite that takes multiple hours, usually ran every night (nightly) A "large" suite that takes a week+ to run We also have a bunch of shorter test suites, but I'm not focusing on them here. The current methodology is to run the small suite before each commit to the trunk. Then, the medium suite runs every night, and if in the morning it turned out it failed, we try to isolate which of yesterday's commits was to blame, rollback that commit and retry the tests. A similar process, only at a weekly instead of nightly frequency, is done for the large suite. Unfortunately, the medium suite does fail pretty frequently. That means that the trunk is often unstable, which is extremely annoying when you want to make modifications and test them. It's annoying because when I check out from the trunk, I cannot know for certain it's stable, and if a test fails I cannot know for certain if it's my fault or not. My question is, is there some known methodology for handling these kinds of situations in a way which will leave the trunk always in top shape? e.g. "commit into a special precommit branch which will then periodically update the trunk every time the nightly passes". And does it matter if it's a centralized source control system like SVN or a distributed one like git? By the way I am a junior developer with a limited ability to change things, I'm just trying to understand if there's a way to handle this pain I am experiencing.

  Read the article

• Does it make sense to write tests for legacy code when there is no time for a complete refactoring?

  - by is4

  I usually try to follow the advice of the book Working Effectively with Legacy Code. I break dependencies, move parts of the code to @VisibleForTesting public static methods and to new classes to make the code (or at least some part of it) testable. And I write tests to make sure that I don't break anything when I'm modifying or adding new functions. A colleague says that I shouldn't do this. His reasoning: The original code might not work properly in the first place. And writing tests for it makes future fixes and modifications harder since devs have to understand and modify the tests too. If it's GUI code with some logic (~12 lines, 2-3 if/else block, for example), a test isn't worth the trouble since the code is too trivial to begin with. Similar bad patterns could exist in other parts of the codebase, too (which I haven't seen yet, I'm rather new); it will be easier to clean them all up in one big refactoring. Extracting out logic could undermine this future possibility. Should I avoid extracting out testable parts and writing tests if we don't have time for complete refactoring? Is there any disadvantage to this that I should consider?

  Read the article

• Long 'Wait' Time for three php/CSS files. Is something blocking them?

  - by William Pitcher

  I have been speed optimizing a Wordpress site to little effect. There are three files CSS-related php files from the Wordpress theme that are delaying page loads on the site. One of the three files is basically one line of custom CSS from the custom CSS feature in the theme. You can see what I am talking about with this Pingdom speed test: The yellow is 'Wait'. There are no slow items in the cut-off portion of the image. The full results are here: Pingdom Results Page 1. Any thoughts on what might be causing this? I understand that I have blocking CSS or JS files, but I don't see anything that would be causing that long of a wait. When I ran the P3 Plugin Profiler, Wordpress and all plugins appeared fine -- it is the theme that is taking all the time. GTmetrix recommends avoiding dynamic queries. I assume all the ver=3.61 references are to the version of Wordpress (which I am using). I noticed that my Wordpress sites using other themes don't make this query (at least not over and over). 2. Is this typical coding practice? 3. How much negative impact do these query-strings have -- a little or a lot? I tried searching for similar questions here, please excuse me if I missed something. Sometimes, I know just enough to be dangerous.

  Read the article

• Do Loops kind of Reset every time you go through it?... [closed]

  - by JacKeown

  #include <iostream> using namespace std; int main (void) { cout << " 1\t2\t3\t4\t5\t6\t7\t8\t9" << endl << "" << endl; for (int c = 1; c < 10; c++) { cout << c << "| "; for (int i = 1; i < 10; i++) { cout << i * c << '\t'; } cout << endl; } return 0; } Hey so this code produces a times table...I found it on Google Code's C++ class online...I'm confused about why "i" in the second for loop resets to 1 every time you go through that loop...or is it being declared again in the first parameter? Thanks in advance!

  Read the article

• Is it normal for GRUB to take some time (15+s) after I choose what to boot?

  - by zarnaik

  I had been planning to change the background of my bootloader for a while, and finally got to it. Now the black screen I get for quite some time was made clear. It is still GRUB, because the background image stays, while all of the text is gone. Then it just simply shows the Lubuntu loading screen for, usually, not more than 3 seconds. I run Lubuntu 12.10. My question is, is this normal behaviour or is something going wrong, causing GRUB to take longer? Here are the contents of my grub file located at /etc/default/ : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_BACKGROUND="/usr/share/lubuntu/wallpapers/1210-Windmill_by_Ferran_Reyes.png" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" If you need any other information please tell me and I'll do my best to provide it. :)

  Read the article

• How to read time phased data from Project Server 2007 directly from Project Server Database ?

  - by Nikhil Vaghela

  I am working on a custom web part for Project Web Access, for Project Server 2007. We are so far using PSI web services only to read and write data from and to Project Server 2007 databases. But there is a signinficant performance issue when you retrieve time phased data through Statusing web service, it is basically an expensive call for querying time phased data for each tasks. I want to access Time phased data entered by user for each tasks by directly hitting the Project Server Database. [ I do not want the solution suggested at this link : http://blogs.msdn.com/project_programmability/archive/2007/05/24/getting-at-the-task-time-phased-data.aspx as it reads data from reporting database which gets entry only after the project is published. ] I want to get time phased data as soon as user enters it. Any idea ? Thanks.

  Read the article

• Time zone for Force.com API fiscal date literals?

  - by Nick

  I have a question about fiscal date literals in the Force.com API (http://www.salesforce.com/us/developer/docs/api/Content/sforce_api_calls_soql_select_dateformats.htm): For which time zone are date ranges calculated? For example, suppose we execute the query: SELECT Id FROM Opportunity WHERE CloseDate = THIS_FISCAL_QUARTER where, according to our company's fiscal settings, THIS_FISCAL_QUARTER runs from Jan 1 to Mar 31. Does the range for THIS_FISCAL_QUARTER use... the user's time zone? For example, if the user's time zone is GMT-8, THIS_FISCAL_QUARTER = Jan 1 00:00 GMT-8 to Mar 31 23:59 GMT-8 (or Jan 1 08:00 UTC to Mar 31 07:59 UTC) the company's default time zone (according to the company profile)? For example, if the company's default time zone is GMT-8, THIS_FISCAL_QUARTER = Jan 1 00:00 GMT-8 to Mar 31 23:59 GMT-8 (or Jan 1 08:00 UTC to Mar 31 07:59 UTC) UTC? THIS_FISCAL_QUARTER = Jan 1 00:00 UTC to Mar 31 23:59 UTC something else?

  Read the article

• How can a Delphi TForm / TPersistent object calculate its own construction and deserialization time?

  - by mjustin

  For performance tests I need a way to measure the time needed for a form to load its definition from the DFM. All existing forms inherit a custom form class. To capture the current time, this base class needs overriden methods as "extension points": start of the deserialization process after the deserialization (can be implemented by overriding the Loaded procedure) the moment just before the execution of the OnFormCreate event So the log for TMyForm.Create(nil) could look like: - 00.000 instance created - 00.010 before deserialization - 01.823 after deserialization - 02.340 before OnFormCreate Which TObject (or TComponent) methods are best suited? Maybe there are other extension points in the form creation process, please feel free to make suggestions. Background: for some of our app forms which have a very basic structure (with some PageControls and QuantumGrids) I realized that it is not database access and other stuff in OnFormShow but the construction which took most of the time (around 2 seconds) which makes me wonder where this time is spent. As a reference object I will also build a mock form which has a similar structure but no code or datamodule connections and measure its creation time.

  Read the article

• How do I change the zone offset for a time in ruby?

  - by Janak

  I have a variable foo that contains a time, lets say 4pm today, but the zone offset is wrong, i.e. it is in the wrong time zone. How do I change the time zone? When I print it I get Fri Jun 26 07:00:00 UTC 2009 So there is no offset, and I would like to set the offset to -4 or Eastern Standard Time. I would expect to be able to just set the offset as a property of the Time object, but that doesn't seem to be available?

  Read the article

• control panel date&time is considered while using "new date()" javascript function.

  - by Rupa

  Hi, I am getting a client date in javscript function using "new date()" object. But this object is considering the properties set for Date&Time control in the control panel of the system. For example, If I check the check box of Date&Time control of the system (control panel) "Automatically adjust clock for daylight saving changes", then I am getting the date(from javscript) according to the Daylight savings time and if I uncheck it, I am getting the date according to the standard time. What I need is to get the date from a Javscript function irrespective of the Date&Time control of the control panel. Thanks Rupa.

  Read the article

• How do I measure the time elapsed when calling a WCF Webservice?

  - by Manuel R.

  We want to track the time taken by a web service call between a client and the server. This time should not include the time taken by the server to process the request. The idea is that we want to see how much time of a web service call is lost due to the actual transfer trough the network. Does WCF already offer something in this direction? Of course I could just add a timer on the client and subtract the server processing time but that wouldn't be very elegant.

  Read the article

• "Easiest" way to track unique visitors to a page, in real time?

  - by Cooper

  I need to record in "real time" (perhaps no more than 5 minute delay?) how many unique visitors a given page on my website has had in a given time period. I seek an "easy" way to do this. Preferably the results would be available via a database query. Two things I've tried that failed (so far): Google Analytics: Does the tracking/reporting, but not in real time - results are delayed by hours. Mint Analytics ( http://www.haveamint.com/ ): Tracks in real time, but seems to aggregate data in a way that prevents reporting of unique visitors to a single page over an arbitrary time frame. So, does anyone know how to make Mint Analytics do what I want, or can anyone recommend an analytics package or programmed approach that will do what I need?

  Read the article

• How to show a page after a specific time period?

  - by Mahfuz

  I want to build an online quiz test site. Suppose, exam will start at 10:00 am and a student login to give exam at 9:45 am. Whenever the student clicks 'Take Exam' button, he/she cannot not get access to the question paper because the exam time is 10:00 am and there are still 15 minutes before the exam start. Now I want to put some Javascript or PHP code that will prohibit the students to give exam earlier and if a students come early, it will show a stopwatch which display the remaining time before exam time and when the current time is equal to exam time then he/she will be directly redirected to the question paper page.

  Read the article

• Python2.7: How can I speed up this bit of code (loop/lists/tuple optimization)?

  - by user89

  I repeat the following idiom again and again. I read from a large file (sometimes, up to 1.2 million records!) and store the output into an SQLite databse. Putting stuff into the SQLite DB seems to be fairly fast. def readerFunction(recordSize, recordFormat, connection, outputDirectory, outputFile, numObjects): insertString = "insert into NODE_DISP_INFO(node, analysis, timeStep, H1_translation, H2_translation, V_translation, H1_rotation, H2_rotation, V_rotation) values (?, ?, ?, ?, ?, ?, ?, ?, ?)" analysisNumber = int(outputPath[-3:]) outputFileObject = open(os.path.join(outputDirectory, outputFile), "rb") outputFileObject, numberOfRecordsInFileObject = determineNumberOfRecordsInFileObjectGivenRecordSize(recordSize, outputFileObject) numberOfRecordsPerObject = (numberOfRecordsInFileObject//numberOfObjects) loop1StartTime = time.time() for i in range(numberOfRecordsPerObject ): processedRecords = [] loop2StartTime = time.time() for j in range(numberOfObjects): fout = outputFileObject .read(recordSize) processedRecords.append(tuple([j+1, analysisNumber, i] + [x for x in list(struct.unpack(recordFormat, fout))])) loop2EndTime = time.time() print "Time taken to finish loop2: {}".format(loop2EndTime-loop2StartTime) dbInsertStartTime = time.time() connection.executemany(insertString, processedRecords) dbInsertEndTime = time.time() loop1EndTime = time.time() print "Time taken to finish loop1: {}".format(loop1EndTime-loop1StartTime) outputFileObject.close() print "Finished reading output file for analysis {}...".format(analysisNumber) When I run the code, it seems that "loop 2" and "inserting into the database" is where most execution time is spent. Average "loop 2" time is 0.003s, but it is run up to 50,000 times, in some analyses. The time spent putting stuff into the database is about the same: 0.004s. Currently, I am inserting into the database every time after loop2 finishes so that I don't have to deal with running out RAM. What could I do to speed up "loop 2"?

  Read the article

• How To Run A Shell Script Again And Again Having X Interval Of Time?

  - by Muhammad Hassan

  I have a shell script in my Ubuntu Server 14.04 LTS at ./ShellScript.sh. I setup /etc/rc.local to run the shell script after boot but before login using below code. Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. #!/bin/bash ./ShellScript.sh exit 0 Now I want to run/execute this shell script again and again having 15min of time interval between every run after boot but before login. So Can I do it? Update 1:) When I run crontab -e then I got the following. Now What to do? no crontab for root - using an empty one Select an editor. To change later, run 'select-editor'. 1. /bin/ed 2. /bin/nano <---- easiest 3. /usr/bin/vim.basic 4. /usr/bin/vim.tiny Choose 1-4 [2]: After selecting 2, I got crontab: "/usr/bin/sensible-editor" exited with status 2 UPDATE 2:) Update ShellScript.sh like below... #!/bin/bash # Testing ShellScript... while true do echo "ShellScript Start Running..." ********************************** All My Shell Script Codes/Script/Commands ********************************** echo "ShellScript End Running..." exit 0 sleep 900 done Then Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. sh ./ShellScript.sh & exit 0

  Read the article

• GUVCVIEW errors

  - by Brian Snapp

  I had GUVCVIEW working once before. it suddenly quit working. This is the error I receive........ bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1448695129 Requested Format unavailable: get width 640 height 480 vid:0c45 pid:6410 driver:uvcvideo (guvcview:4079): Gtk-CRITICAL **: gtk_hscale_new_with_range: assertion `min < max' failed (guvcview:4079): Gtk-CRITICAL **: gtk_scale_set_draw_value: assertion `GTK_IS_SCALE (scale)' failed Segmentation fault I suppose the problem lies in the fact, that I cannot locate a configuration file to edit. Any help in where this file may lie? I have tried searching for any/everything related to guvcview, and have had zero success. Thank you for taking the time to read this, and hopefully providing a solution..

  Read the article

• SNTP, why do you mock me?!

  - by Matthew

  --- SOLVED SEE EDIT 5 --- My w2k3 pdc is configured as an authoritative time server. Other servers on the domain are able to sync with it if I manually specify it in the peer list. By if I try to sync from flags 'domhier', it wont resync; I get the error message The computer did not resync because no time data was available. I can only think that it is not querying the pdc. I also tried setting the registry as shown here (http://support.microsoft.com/kb/193825). But no luck (I have not restarted the server, I am hoping I wont have to since it is the pdc) If you would like any further information on my config, please let me know. Edit 1: I have set the w32time service config AnnouceFlags to 0x05 as documented here www.krr.org/microsoft/authoritative_time_servers.php and a number of other places. The PDC syncs to an external time source (ntp). I can get the stripchart on the client from the pdc no problems. The loginserver for the host I am trying to configure is shown as the pdc. Edit 2: The packet capture has revealed something interesting. The client is contacting the correct server, and getting a valid response but I still get the same error message. Here is the NTP excerpt from the client to the server Flags: 11.. .... = Leap Indicator: alarm condition (clock not synchronized) (3) ..01 1... = Version number: NTP Version 3 (3) .... .011 = Mode: client (3) Peer Clock Stratum: unspecified or unavailable (0) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.015625 sec Root Delay: 0.0000 sec Root Dispersion: 1.0156 sec Reference Clock ID: NULL Reference Clock Update Time: Sep 1, 2010 05:29:39.8170 UTC Originate Time Stamp: NULL Receive Time Stamp: NULL Transmit Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Key ID: DC080000 Here is the reply NTP excerpt from the server to the client Flags: 0x1c 00.. .... = Leap Indicator: no warning (0) ..01 1... = Version number: NTP Version 3 (3) .... .100 = Mode: server (4) Peer Clock Stratum: secondary reference (3) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.00001 sec Root Delay: 0.1484 sec Root Dispersion: 0.1060 sec Reference Clock ID: 192.189.54.17 Reference Clock Update Time: Nov 8,2010 01:18:04.6223 UTC Originate Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Receive Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Transmit Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Key ID: 00000000 Edit 3: dumpreg for paramters on pdc Value Name Value Type Value Data ------------------------------------------------------------------------ ServiceMain REG_SZ SvchostEntry_W32Time ServiceDll REG_EXPAND_SZ C:\WINDOWS\system32\w32time.dll NtpServer REG_SZ bhvmmgt01.domain.com,0x1 Type REG_SZ AllSync and config Value Name Value Type Value Data -------------------------------------------------------------------------- LastClockRate REG_DWORD 156249 MinClockRate REG_DWORD 155860 MaxClockRate REG_DWORD 156640 FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 HoldPeriod REG_DWORD 5 LocalClockDispersion REG_DWORD 10 EventLogFlags REG_DWORD 2 PhaseCorrectRate REG_DWORD 7 MinPollInterval REG_DWORD 6 MaxPollInterval REG_DWORD 10 UpdateInterval REG_DWORD 100 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 AnnounceFlags REG_DWORD 5 MaxAllowedPhaseOffset REG_DWORD 300 FileLogSize REG_DWORD 10000000 FileLogName REG_SZ C:\Windows\Temp\w32time.log FileLogEntries REG_SZ 0-300 Edit 4: Here are some notables from the ntp log file on the pdc. ReadConfig: failed. Use default one 'TimeJumpAuditOffset'=0x00007080 DomainHierachy: we are now the domain root. ClockDispln: we're a reliable time service with no time source: LS: 0, TN: 864000000000, WAIT: 86400000 Edit 5: F&^%ING SOLVED! Ok so I was reading about people with similar problems, some mentioned w32time server settings applied by GPO, but I tested this early on and there were no settings applied to this service by gpo. Others said that the reporting software may not be picking up some old gpo settings applied. So I searched the registry for all w32time instaces. I came across an interesting key that indicated there may be some other ntp software running on the server. Sure enough, I look through the installed software list and there the little F*&%ER is. Uninstalled and now working like a dream. FFFFFFFUUUUUUUUUUUU

  Read the article

• OS X borked; need to backup outside of Time Machine

  - by rlbgator

  Quick Background: iMac G5 (the white one; 4 years old?) Running Leopard 10.5.something. Time Machine started failing on me; and every time I touch the Finder, things beachball like crazy. Booting from install disk then using Disk Utility to "Repair Disk" also fails. I'm left with the conclusion that I have a corrupt file somewhere important, that's (i) keeping TM from working and (ii) messing with basic functionality. I am not (yet) savvy enough in OS X to know what logs to look in, or how to decipher them - but 'corrupt file' seems to be the likely case, based on my readings of apple.com forum threads. So I think I need to backup, outside of Time Machine, then install fresh OS X on a new drive (or maybe SpinRite the current drive?). I'm able to put a (non-Time Machine) external USB drive on, so I dragged all 3 Users' folders to that... am I done backing up? Am I going to have a massive Permissions problem, trying to put things back together after a re-install? Thanks for reading.

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• How to properly do weapon cool-down reload timer in multi-player laggy environment?

  - by John Murdoch

  I want to handle weapon cool-down timers in a fair and predictable way on both client on server. Situation: Multiple clients connected to server, which is doing hit detection / physics Clients have different latency for their connections to server ranging from 50ms to 500ms. They want to shoot weapons with fairly long reload/cool-down times (assume exactly 10 seconds) It is important that they get to shoot these weapons close to the cool-down time, as if some clients manage to shoot sooner than others (either because they are "early" or the others are "late") they gain a significant advantage. I need to show time remaining for reload on player's screen Clients can have clocks which are flat-out wrong (bad timezones, etc.) What I'm currently doing to deal with latency: Client collects server side state in a history, tagged with server timestamps Client assesses his time difference with server time: behindServerTimeNs = (behindServerTimeNs + (System.nanoTime() - receivedState.getServerTimeNs())) / 2 Client renders all state received from server 200 ms behind from his current time, adjusted by what he believes his time difference with server time is (whether due to wrong clocks, or lag). If he has server states on both sides of that calculated time, he (mostly LERP) interpolates between them, if not then he (LERP) extrapolates. No other client-side prediction of movement, e.g., to make his vehicle seem more responsive is done so far, but maybe will be added later So how do I properly add weapon reload timers? My first idea would be for the server to send each player the time when his reload will be done with each world state update, the client then adjusts it for the clock difference and thus can estimate when the reload will be finished in client-time (perhaps considering also for latency that the shoot message from client to server will take as well?), and if the user mashes the "shoot" button after (or perhaps even slightly before?) that time, send the shoot event. The server would get the shoot event and consider the time shot was made as the server time when it was received. It would then discard it if it is nowhere near reload time, execute it immediately if it is past reload time, and hold it for a few physics cycles until reload is done in case if it was received a bit early. It does all seem a bit convoluted, and I'm wondering whether it will work (e.g., whether it won't be the case that players with lower ping get better reload rates), and whether there are more elegant solutions to this problem.

  Read the article

• How do you set max execution time of PHP's CLI component?

  - by cwd

  How do you set max execution time of PHP's CLI component? I have a CLI script that has gone into a infinite loop and I'm not sure how to kill it without restarting. I used quicksilver to launch it, so I can't press control+c at the command line. I tried running ps -A (show all processes) but php is not showing up in that list, so perhaps it has timed out on it's own - but how do you manually set the time limit? I tried to find information about where I should set the max_execution_time setting, I'm used to setting this for the version of PHP that runs with apache, but I have no idea where to set it for the version of PHP that lives in /usr/bin. I did see the follow quote, which does seem to be accurate (see screenshot below), but having an unlimited execution time doesn't seem like a good idea. Keep in mind that for CLI SAPI max_execution_time is hardcoded to 0. So it seems to be changed by ini_set or set_time_limit but it isn't, actually. The only references I've found to this strange decision are deep in bugtracker (http://bugs.php.net/37306) and in php.ini (comments for 'max_execution_time' directive). (via http://php.net/manual/en/function.set-time-limit.php) ini_set('max_execution_time') has no effect. I also tried the same thing and go the same result with set_time_limit(7).

  Read the article

• Killing a process which ran for a lot of time or is using a lot of memory

  - by Vedant Terkar

  I am not sure whether this question belong to Stack Overflow or here, but here we go. I am designing a online 'C' compiler, which will compile and invoke the program if compilation succeeded. So here is code which I am using for that: $str=shell_exec("gcc path/to/file.c -o path/to/file.exe 2>&1"); if(file_exists("path/to/file.exe")){ $res=shell_exec("path/to/file.exe <inputfile 2>&1"); echo $res; } This Seems to work fine with simple program files. But When file.c That is the source code entered contains Infinite loop then This script crashes the server and utilizes a lot of memory and time. So here is my question: Is There any way to detect for how much time does the process file.exe is Running? How Much Space is Utilized by that process that is file.exe? Is There any way to kill the process file.exe if space and time utilization increases beyond certain limit? That Mean if we allocate time of 2.5sec and space of 40Mb at max for that process file.exe and if any one of those 2 constraints is violated then we should display appropriate error message to client Is it possible? I am Using WAMP (Windows 7).

  Read the article

• What can cause the system to freeze in a way where even the reset button takes a long time to react?

  - by ThiefMaster

  What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

  Read the article

• Is an Ethernet point to point connection without a switch real time capable?

  - by funksoulbrother

  In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >