Search Results

Search found 24514 results on 981 pages for 'connection manager'.

Page 15/981 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• SSH Connection Error : ssh_exchange_identification: read: Connection reset by peer

  - by Senthil G

  When I tried to connect to the server via SSH, I'm getting the following error, [root@oneeighty ~]# ssh -vvv -p 443 [email protected] OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx [IP] port 443. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: loaded 3 keys ssh_exchange_identification: read: Connection reset by peer I have checked the SSH configuration on server and client and there are no issues. Restarted the SSH Service on Server and then restarted the server/client. But the issues is not resolved. Please help to fix the issue. Thanks in Advance, -Senthil

  Read the article

• Modem doesn't seem to pass internet connection to router

  - by Vian Esterhuizen

  I was supplied a Cisco DPC3825 modem by my ISP and use a Cisco E4200 as my main router. Today the Internet just stopped working, just out of the blue, I can't think of anything that would have triggered it. It's been working pretty good for the past month except for a few random blips here and there. After some trouble shooting I realized that a direct wired connection to the modem would get me Internet access but if I was wired to the router as I was before I would have no connection. Assuming it was router I connected a TP-Link WR841N but it had the exact same problem. Also, connecting to the router via Wi-Fi from multiple devices will connect me to the router but I still can't get access to the Internet. From these test, it seems that the modem just won't send Internet through to the router but is clearly connecting and able to directly connect to my PC. What I've Tried A full reset and factory reset on the E4200 A full reset on the modem (but I believe my ISP has remote access to the modem because the passwords and so on are always set back). My ISP has remotely reconfigured the modem What I Should Try What else can I try? What should I do to try to narrow down the issue? Can you figure out what the problem might be based on this information?

  Read the article

• Windows 8 Task Manager without elevating?

  - by Ben Voigt

  In Windows Vista and Windows 7, the task manager ran non-elevated, and you didn't face a UAC prompt unless you chose "View Processes of All Users". In Windows 8 Preview, out of the box the Task Manager starts elevated every time. How can I configure it to start non-elevated so I don't get hit with a UAC prompt every time I check CPU usage or view the list of running processes to see if an application closed completely? (I am not looking for answers which involve weakening UAC, and I ask the community's help in downvoting any such suggestions.)

  Read the article

• Connection Issue

  - by Karl Schneider

  Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

  Read the article

• questions about toucan manager

  - by user23950

  I'm new to this application toucan manager. How do I use it to download mediafire files automatically. By just providing the links. What link do I have to put in it? This: http://www.mediafire.com/?yoqygwzsyem Or this: http://download783.mediafire.com/yerhxuymxd3g/yoqygwzsyem/op-338-muxed.mp4 Because when I put the one with the .mp4, it checks the link endlessly. And one more thing, I've seen something like: you have to agree first w/ mediafire's bla bla bla. When I try to check the mediafire icon in the toucan manager.

  Read the article

• The best lightweight window manager for linux?

  - by mythz

  What is the best lightweight window manager (optimized for running over a network) for Linux?

  Read the article

• memcached and IIS manager with windows 2008

  - by user64484

  I have memcached (c:\memcached) running on port 11211 and I have a problem configuring IIS manager I created a site in IIS manager binded to port 11211 and if I have memcached running and try and start the site it says "the process cant access the file because it is being used by another process" If I stop memcached and start the site in IIS (and enable directory browsing) I can access the directory structure http://localhost:11211 ok, if I then try and start memcached it errors with error 1053 "could not start the memcached server on local computer" I know I'm doing something fundamentally wrong here! just cannot figure out how I can use IIS and memcached together. [edit]I should add that I need other servers to be able to access memcached[/edit]

  Read the article

• Wi-Fi connection drops when downloading torrents, but wired connection still works

  - by bryan

  After downloading for an hour or so, the Wi-Fi connection on my tablet stops working; forcing me to restart my router(it basically hangs when trying to connect). This only happens when downloading torrents. WIRED connection on my desktop PC with router still works fine; no issues at all. I tired to lower the number of global connections to 50, but I still have the problem. I have also updated to the latest Linksys firmware. One PC, a tablet and a smartphone. I have COX cable. Please let me know if you need any other info. Thank you!

  Read the article

• Task Manager does not show memory usage

  - by Robin

  I just noticed this yesterday. I selected different memory columns, none of them worked, and I've tried showing processes from all users. I'm using Win 7. It doesn't slow down my computer or does anything else. I just want to know why and how to fix it. Could anyone help me on this? Thank you cannot post pix :( it is like this: only shows K, without actual number Image Name--------User Name----CPU----Memory (Private Working Set)------Description System -----------SYSTEM ------01-------------------------------K-------NT Kernel &system Smss.exe--------- SYSTEM -----00-------------------------------K-------Win Session Manager Wininit.exe------ SYSTEM ------00-------------------------------K-------Win Start-up Applic It's pretty much the same as http://www.sevenforums.com/general-discussion/56891-my-task-manager-doesnt-show-ram-usage-each-program.html that is the only one i found on google.

  Read the article

• set service dependency on internet connection

  - by nccsbim071

  Hi, I have created a window service and set some dependencies like on MSMQ, MSSQLSERVER and so. Everything is working nice. but i need to send another dependency for my service. That is on internet connection. My service is responsible for sending emails. As soon my server starts, my service starts too and it finds if there is anything to send, if there is, it starts to send email, if during sending it is not able to connect to the internet it cannot send email. so i guess i should set my service dependency on internet connection too. I already set my window service dependency to MicrosoftSQL Server and Microsoft Message Queuing by editing the registry value. by adding new multi string value named "DependOnService", Type "REG_MULTI_SZ" and space separated names of the services that my service depends upon for the Data. For Microsoft SQL Server i set the value to "MSSQLSERVER" but i don't know the name of the internet service that i need to set dependency upon. how can i do this, any help please Thanks

  Read the article

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• The Wifi is working fine but no internet connection in Windows 8 [migrated]

  - by Ali

  I'm currently having a Problem with my msi GT70 laptop. my laptop is running windows 8 and yesterday it requested a Restart to Update. after the Restart and the update I tried to surf the net through google chrome, the WiFi connection is perfect but the page I tried to access is not loading at all, after a while it shows failure to load page. I disabled and reenabled the WiFi chip through the device manager but still no internet connection. I uninstalled and reinstalled the drivers, still no internet. I updated the Driver of the wifi, still no internet, I even went to Wifi configuration and tried to change the DNS and reset it back to automatically, still no Luck.. I'm really lost I don't know what to do, I don't want to go deep and play with Laptop DNA "aka: registry file" and screw things up. I really appreciate any help in this matter. thanks in advance. Note: I tried to access many pages but no luck. I even tried Firefox, Opera, even ie still no luck. The internet is working fine on my tablet and cellphone, except for the Laptop.

  Read the article

• Task Manager always crashes..

  - by tallship

  This is the error report: Problem signature: Problem Event Name: APPCRASH Application Name: taskmgr.exe Application Version: 6.1.7600.16385 Application Timestamp: 4a5bc3ee Fault Module Name: hostv32.dll Fault Module Version: 0.0.0.0 Fault Module Timestamp: 4c5c027d Exception Code: c0000005 Exception Offset: 0000000000068b73 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: bf4f Additional Information 2: bf4f79e8ecbde38b818b2c0e2771a379 Additional Information 3: d246 Additional Information 4: d2464c78aa97e6b203cd0fca121f9a58 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Whenever I open the task manager, within a few seconds it crashes, saying it has stopped working with the above report. I took the fault module (hostv32.dll) and scanned it with avast but it found no threat. I also ran a SFC /scannow from an elevated command prompt and it didn't find any corrupted files. This problem is in all two user accounts in this computer (Windows 7). There was one time where task manager seemed to work, but when I closed it and opened it again, it crashed. Any reason/solution to this problem?

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• SSH connection times out unless I tunnel in from a different server-

  - by rm-vanda

  OK, so this just started last week - Whenever we try to connect to our server via ssh (we use sftp, as well) - The connection times out. However, when you ssh to any other server and then ssh into the machine - it works flawlessly. Now, the mindblowing thing is that sometimes the ssh connection will succeed. Moments ago, I tried it from another machine, and then my own, and it worked - only to time out the next go around. Last week, simply restarting the ssh daemon worked, but this week, no such luck. I even went in and changed: /etc/hosts.allow ALL : ALL and /etc/hosts.deny is blank. The firewall config hasn't changed - but I even disabled the firewall to see if that would work - It did, for a moment - before cutting off, again. (ufw is set to "ALLOW" not "LIMIT") When I try SSH'ing in from my phone -- it works, fine -- So, it seems the problem is with our ISP/router/gateway - However, I see no log in the router/gateway that says its blocking our connections - And that wouldn't explain why we can SSH into any other server -- except for this one - from our network --- I truly appreciate any insight that anyone may have on this matter -

  Read the article

• Redis connection issue

  - by mre

  We are currently experiencing a lot of Redis errors with the message Unable to connect: read error on connection, trying next server We run Redis on FreeBSD using PHP Redis and we have a hard time reproducing the error on Ubuntu so this might be a hint. There's a long-running issue on that topic on github. Basically we get a socket from the operating system with a call to connect(host, port, timeout) in phpredis, but when we do a select(db_index) afterwards, we get an exception. Could there be an issue with persistance? I assume that connect does nothing in the background and select tries to access the connection, which is actually closed. We don't run into a timeout. We tried tuning TIME_WAIT without success. Any other ideas on where the problem might come from? What is the best way to track the issue down? dtrace maybe? Update We are currently looking into our BGSAVE settings. Interestingly it takes half a second and more to create a fork for the process which regularly writes the data to disk (persistence) and maybe redis can't respond to connect() requests during that timespan.

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Periodic internet connection drops

  - by user9647

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Server needs to ping outgoing before allowing connection

  - by QuintenVK

  Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

  Read the article

• Weird WLAN connection

  - by tuelsch

  I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

  Read the article

• Remote location looses connectivity

  - by user24559

  I have a remote location that has constant internet access using DSL. The remote location only has three Linksys cameras that use the internet access with a router. There is no computer on the network. The router is configured to use the DYN.org service to keep the IP address updated if the internet provider assigns a new ip address. The problem I am having is the router after a period of time stops responding to incoming ping requests and the cameras are shown offline. However, if I keep one of the cameras constantly streaming data then the connection to all the cameras works just fine all the time. How can I keep the router from appearing to be sleeping and not responding to incoming requests? The router is the Linksys WRT300N.

  Read the article

• OpenJPA + Tomcat JDBC Connection Pooling = stale data

  - by Julie MacNaught

  I am using the Tomcat JDBC Connection Pool with OpenJPA in a web application. The application does not see updated data. Specifically, another java application adds or removes records from the database, but the web application never sees these updates. This is quite a serious issue. I must be missing something basic. If I remove the Connection Pool from the implementation, the web application sees the updates. It's as if the web application's commits are never called on the Connection. Version info: Tomcat JDBC Connection Pool: org.apache.tomcat tomcat-jdbc 7.0.21 OpenJPA: org.apache.openjpa openjpa 2.0.1 Here is the code fragment that creates the DataSource (DataSourceHelper.findOrCreateDataSource method): PoolConfiguration props = new PoolProperties(); props.setUrl(URL); props.setDefaultAutoCommit(false); props.setDriverClassName(dd.getClass().getName()); props.setUsername(username); props.setPassword(pw); props.setJdbcInterceptors("org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;"+ "org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer;"+ "org.apache.tomcat.jdbc.pool.interceptor.SlowQueryReportJmx;"+ "org.apache.tomcat.jdbc.pool.interceptor.ResetAbandonedTimer"); props.setLogAbandoned(true); props.setSuspectTimeout(120); props.setJmxEnabled(true); props.setInitialSize(2); props.setMaxActive(100); props.setTestOnBorrow(true); if (URL.toUpperCase().contains(DB2)) { props.setValidationQuery("VALUES (1)"); } else if (URL.toUpperCase().contains(MYSQL)) { props.setValidationQuery("SELECT 1"); props.setConnectionProperties("relaxAutoCommit=true"); } else if (URL.toUpperCase().contains(ORACLE)) { props.setValidationQuery("select 1 from dual"); } props.setValidationInterval(3000); dataSource = new DataSource(); dataSource.setPoolProperties(props); Here is the code that creates the EntityManagerFactory using the DataSource: //props contains the connection url, user name, and password DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); If I comment out the DataSource like so, then it works. Note that OpenJPA has enough information in the props to configure the connection without using the DataSource. //props contains the connection url, user name, and password //DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); //props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); So somehow, the combination of OpenJPA and the Connection Pool is not working correctly.

  Read the article

• Oracle Enterprise Manager Ops Center 12c Update 1 is available now

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following the announcement of Oracle Enterprise Manager Ops Center 12c on April 4th, we are happy to announce the release of Oracle Enterprise Manager Ops Center 12c update 1. This is a bundled patch release for Oracle Enterprise Manager Ops Center.  Here are the key features of the Oracle Enterprise Manager Ops Center 12c update 1 : Oracle VM SPARC Server Pool HA Policy  Automatically Upgrade from Ops Center 11g update 3 and Ops Center 12c  Oracle Linux 5.8 and 6.x Support  Oracle VM SPARC IaaS (Virtual Datacenters) WANBoot Improvements with OBP Handling Enhancements SPARC SuperCluster Support Stability fixes This new release contains significant enhancements in the update provisioning, bare metal OS provisioning, shared storage management, cloud/virtual datacenter, and networking management sections of the product.  With this update, customers can achieve better handling of ASR faults, add networks and storage to virtual guests more easily, understand IPMP and VLAN configurations better, get a more robust LDAP integration, get  virtualization aware firmware patching, and observe improved product performance across the board.  Customers can now accelerate Oracle VM SPARC and T4 deployments into production . Oracle Enterprise Manager Ops Center 11g and Ops Center 12c customers will now notice the availability of new product update under the Administration tab within the  Browser User Interface (BUI) .  Upgrade process is explained in detail within the Ops Center Administration Guide under “Chapter 10: Upgrading”.  Please be sure to read over that chapter and the Release Notes before upgrading.  During the week of July 9th,  the full download of the product will be available from the Oracle Enterprise Manager Ops Center download website.  Based on the customer feedback, we have changed the updates to include the entire product. Customers no longer need to install Ops Center 12c and then upgrade to the update 1 release.  The can simply install Ops Center 12c update 1 directly.  Here are some of the resources that can help you learn more about the Oracle Enterprise Manager Ops Center and the new update 1. Oracle Enterprise Manager Ops Center OTN site Bi-Monthly Product Demos Oracle Enterprise Manager Ops Center Forum Oracle Enterprise Manager Ops Center MOS Community Watch the recording of Oracle Enterprise Manager 12c launch webcast by clicking the following banner. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• SSH Connection refused

  - by ThinkBohemian

  I was logged into my server earlier today, and now when i go to SSH i get the error "SSH Connection Refused" i'm running Ubuntu Hardy. The server is still working, and serving web-pages i just cannot get in. Last time i was on the server, i didn't change any of the iptables. Is there anyway to troubleshoot this issue without being able to get into the server?

  Read the article

• Xenu Link Checker - "No Connection" status

  - by Ed Talmadge

  In the past, I received no errors from Xenu Link Checker. Today, I get thousands of pages with status "No Connection". The URL's that show the error are accessible. I've used the "Retry Broken Links" command 10 times and still get the same list of errors. Why does this happen?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >