Search Results

Search found 7592 results on 304 pages for 'dev'.

Page 15/304 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • No device file for partition on logical volume (Linux LVM)

    - by Brian
    I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

    Read the article

  • Error installing RVM

    - by Dbugger
    I am following this guide, but this is the output I receive. What am the problem? dbugger@mercury:~$ \curl -sSL https://get.rvm.io | bash -s stable --rails Downloading https://github.com/wayneeseguin/rvm/archive/stable.tar.gz Upgrading the RVM installation in /home/dbugger/.rvm/ RVM PATH line found in /home/dbugger/.profile /home/dbugger/.bashrc /home/dbugger/.zshrc. RVM sourcing line found in /home/dbugger/.bash_profile /home/dbugger/.zlogin. Upgrade of RVM in /home/dbugger/.rvm/ is complete. # Enrique, # # Thank you for using RVM! # We sincerely hope that RVM helps to make your life easier and more enjoyable!!! # # ~Wayne, Michal & team. In case of problems: http://rvm.io/help and https://twitter.com/rvm_io Upgrade Notes: * No new notes to display. rvm 1.25.27 (stable) by Wayne E. Seguin <[email protected]>, Michal Papis <[email protected]> [https://rvm.io/] Searching for binary rubies, this might take some time. No binary rubies available for: ubuntu/14.04/x86_64/ruby-2.1.2. Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies. Checking requirements for ubuntu. Installing requirements for ubuntu. Updating system.......... Installing required packages: gawk, libreadline6-dev, libssl-dev, libyaml-dev, libsqlite3-dev, sqlite3.... Error running 'requirements_debian_libs_install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3', showing last 15 lines of /home/dbugger/.rvm/log/1401804140_ruby-2.1.2/package_install_gawk_libreadline6-dev_libssl-dev_libyaml-dev_libsqlite3-dev_sqlite3.log ++ /scripts/functions/utility : __rvm_try_sudo() 405 > sudo -p '%p password required for '\''apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3'\'': ' apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libssl-dev : Depends: libssl1.0.0 (= 1.0.1f-1ubuntu2) but 1.0.1f-1ubuntu2.1 is to be installed E: Unable to correct problems, you have held broken packages. ++ /scripts/functions/utility : __rvm_try_sudo() 405 > return 100 ++ /scripts/functions/requirements/ubuntu : requirements_debian_libs_install() 36 > return 100 Requirements installation failed with status: 100.

    Read the article

  • RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

    - by user212475
    I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

    Read the article

  • Cannot open /dev/rfcomm1 : Host is down

    - by srj0408
    I am working on raspberry PI and on Bluetooth. I am using old raspberry pi kernel as the new one has got some bugs that were not resolved with respect to the bluez daemon. At present my kernel version is 3.6.11. I am using a USB bluetooth dongle and my sole purpose is to auto connect the bluetooth dongle when ever it is in range. For that i think i have to run a script in the backend on RPI that will keep on checking the existence of usb bluetooth dongle. I started from the very scratch. I installed bluez daemon using apt-get install bluetooth bluez utils blueman and then i used hciconfig which gives me that my bluetooth usb dongle is working fine. But when i did hcitool scan , it give me no device in range even though my Serial bluetooth Device was on. I wasn't able to find any device in vicinity. Also when i unplugged and plug the USB dongle again, i was able to scan the serial device , but when i repeat the process, i find the earlier condition of not finding any deice. I had find another useful link, but that need address of the bluetooth device that need to be connected. I want to automate this using hcitool scan, storing the output to the a file and then comparing it with already paired devices and their name. For that i need to figure out why hcitool scan is sometime working and sometime not. ? Can some one help me in figuring out why this is happening. Is there any problem on hardware side i.e Bluetooth dongle is buggy or i had some problem in bluez utils. Edit 1: While as of now, hcitool scan is giving me my remote device address but still i am getting the same issue of HOUST IS DOWN, '/dev/rfcomm1'. I am really not getting any idea of what to be done.

    Read the article

  • Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

    Read the article

  • Cross platform /dev/null in Python

    - by Tristan
    I'm using the following code to hide stderr on Linux/OSX for a Python library I do not control that writes to stderr by default: f = open("/dev/null","w") zookeeper.set_log_stream(f) Is there an easy cross platform alternative to /dev/null? Ideally it would not consume memory since this is a long running process.

    Read the article

  • How do I mount a "DiskSecure Multiboot" partition?

    - by ????
    For a hard drive that has 4 or 5 partitions, I was able to mount one of them using Ubuntu LiveCD: sudo mount /dev/sda1 /mnt but is there a way to mount to the other partitions? (if using sudo fdisk -l, it only shows /dev/sda) GParted's snapshot is: Right now, the fdisk info is as follows: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1aca8ea5 Device Boot Start End Blocks Id System /dev/sda1 284993226 350602558 32804666+ 7 HPFS/NTFS/exFAT and then ubuntu@ubuntu:/mnt$ sudo fdisk -l /dev/sda1 Disk /dev/sda1: 33.6 GB, 33591978496 bytes 255 heads, 63 sectors/track, 4083 cylinders, total 65609333 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2052474d This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sda1p1 ? 6579571 1924427647 958924038+ 70 DiskSecure Multi-Boot /dev/sda1p2 ? 1953251627 3771827541 909287957+ 43 Unknown /dev/sda1p3 ? 225735265 225735274 5 72 Unknown /dev/sda1p4 2642411520 2642463409 25945 0 Empty Partition table entries are not in disk order Per @lgarzo's request, parted info is: ubuntu@ubuntu:/mnt$ sudo parted /dev/sda print Model: ATA ST3320820AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 146GB 180GB 33.6GB primary ntfs boot The command sudo mount /dev/sda1p2 /mnt won't work.

    Read the article

  • Can't add Fedora 14 to grub.

    - by Dananjaya
    Today I installed Fedora 14 in a different partition in the same hard drive as Ubuntu. At the Fedora 14 installation, I chose not to install Boot-loader in the MBR, and instead chose to install it in the Fedora partition itself, which is according to my HD layout /sda3. After the Fedora 14 installation I booted in to Ubuntu and ran sudo update-grub but 'grub.cfg' fails to add Fedora 14 in to the OS list. Here is the output of boot-info script. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda3: __________________________________________________________________________ File system: ext4 Boot sector type: Grub Legacy Boot sector info: Grub Legacy (v0.97) is installed in the boot sector of sda3 and looks at sector 49897340 on boot drive #1 for the stage2 file. A stage2 file is at this location on /dev/sda. Stage2 looks on partition #3 for /grub/grub.conf. Operating System: Boot files: /grub/menu.lst /grub/grub.conf sda4: __________________________________________________________________________ File system: LVM2_member Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 49,865,759 49,863,712 83 Linux /dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended /dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris /dev/sda3 49,866,752 50,890,751 1,024,000 83 Linux /dev/sda4 50,890,752 74,864,639 23,973,888 8e Linux LVM "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 03e2a8da-171f-49e9-b24d-434e66cd1140 ext4 /dev/sda3 dea81d77-a375-4d0e-954e-1829f6b91f10 ext4 /dev/sda4 mzVoj0-GHJu-DJr4-0G2Y-SzZ0-LTfW-F01yf9 LVM2_member /dev/sda5 3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,user_xattr,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="2" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation # Commented out by Dropbox # UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 none swap sw 0 0 UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro,user_xattr 0 1 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 0.065803528 = 0.070656000 boot/grub/core.img 1 21.263332367 = 22.831329280 boot/grub/grub.cfg 1 0.771381378 = 0.828264448 boot/initrd.img-2.6.31-wl 1 2.054199219 = 2.205679616 boot/initrd.img-2.6.32-21-generic 3 2.893260956 = 3.106615296 boot/initrd.img-2.6.35-28-generic 2 6.833232880 = 7.337127936 boot/initrd.img-2.6.38-8-generic 2 1.772453308 = 1.903157248 boot/vmlinuz-2.6.32-21-generic 2 2.068012238 = 2.220511232 boot/vmlinuz-2.6.35-28-generic 1 5.532531738 = 5.940510720 boot/vmlinuz-2.6.38-8-generic 1 6.833232880 = 7.337127936 initrd.img 2 2.893260956 = 3.106615296 initrd.img.old 2 5.532531738 = 5.940510720 vmlinuz 1 2.068012238 = 2.220511232 vmlinuz.old 1 ============================= sda3/grub/grub.conf: ============================= -------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,2) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda3 default=0 timeout=0 splashimage=(hd0,2)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.6-45.fc14.i686) root (hd0,2) kernel /vmlinuz-2.6.35.6-45.fc14.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /initramfs-2.6.35.6-45.fc14.i686.img -------------------------------------------------------------------------------- =================== sda3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 23.792903900 = 25.547436032 grub/grub.conf 1 23.792903900 = 25.547436032 grub/menu.lst 1 23.793020248 = 25.547560960 grub/stage2 1 23.817364693 = 25.573700608 initramfs-2.6.35.6-45.fc14.i686.img 2 23.787566185 = 25.541704704 initrd-plymouth.img 1 23.791228294 = 25.545636864 vmlinuz-2.6.35.6-45.fc14.i686 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda2 00000000 81 71 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.qb.....MC:.....| 00000010 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000020 5d 56 50 ff a1 94 89 ff 81 70 62 ff 81 70 62 ff |]VP......pb..pb.| 00000030 81 70 62 ff 81 70 62 ff 81 70 62 ff a1 94 89 ff |.pb..pb..pb.....| 00000040 4d 43 3a ff fa f2 ec ff fb f6 f1 ff fc f8 f4 ff |MC:.............| 00000050 fc f8 f4 ff fc f8 f4 ff 5d 56 50 ff a1 94 89 ff |........]VP.....| 00000060 81 70 62 ff 81 70 62 ff 81 70 62 ff 81 70 62 ff |.pb..pb..pb..pb.| 00000070 81 70 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.pb.....MC:.....| 00000080 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000090 5d 56 50 ff a0 93 89 ff 80 6f 61 ff 80 6f 61 ff |]VP......oa..oa.| 000000a0 80 6f 61 ff 80 6f 61 ff 80 6f 61 ff a0 93 89 ff |.oa..oa..oa.....| 000000b0 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000000c0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9f 93 88 ff |........]VP.....| 000000d0 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff |.o`..o`..o`..o`.| 000000e0 7f 6f 60 ff 9f 93 88 ff 4d 43 3a ff fa f2 ed ff |.o`.....MC:.....| 000000f0 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000100 5d 56 50 ff 9f 93 88 ff 7f 6f 60 ff 7f 6f 60 ff |]VP......o`..o`.| 00000110 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 9f 93 88 ff |.o`..o`..o`.....| 00000120 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 00000130 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 00000140 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff |~n`.~n`.~n`.~n`.| 00000150 7e 6e 60 ff 9e 92 88 ff 4d 43 3a ff fa f2 ed ff |~n`.....MC:.....| 00000160 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000170 5d 56 50 ff 9e 92 88 ff 7d 6d 5f ff 7d 6d 5f ff |]VP.....}m_.}m_.| 00000180 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 9e 92 88 ff |}m_.}m_.}m_.....| 00000190 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000001a0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 000001b0 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 7d 6d 00 fe |}m_.}m_.}m_.}m..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== unlzma: Decoder error According to this Fedora 14 is visible in sda3. Does anybody know a way to add Fedora 14 to grub.cfg of Ubuntu so I can choose which OS to boot? Thanks in advance.

    Read the article

  • mount another drive to the same directory

    - by Ken Autotron
    I recently purchased a server that was advertised as 2TB (2 1TB drives) in size, when I use it it reports only one of the drives, I would like to be able to use both as if one drive. here is the specs... sudo lshw -C disk *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: MS2O serial: 13EJ81XPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0005b3dd *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb version: MS2O serial: 13OX3TKPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00030e86 and fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030e86 Device Boot Start End Blocks Id System /dev/sdb1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sdb2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sdb3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005b3dd Device Boot Start End Blocks Id System /dev/sda1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sda2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sda3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/md2: 978.2 GB, 978187124736 bytes 2 heads, 4 sectors/track, 238815216 cylinders, total 1910521728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 21.5 GB, 21474770944 bytes 2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table is it possible to mount both drives to say /Home/ so I would have 2TB of usable space?

    Read the article

  • Missing Operating System after trying to upgrade to Ubuntu 11

    - by Mauricio
    there! After trying to upgrade from Ubuntu 10.04 to 11, the upgrading process stopped when running and then I got an "out of disk, grub rescue" message when booting. After running Boot Repair, I got this results. Now I get "Missing Operating System" whent trying to boot. Bellow I show some results from some commands I gather from help foruns, but I still reached no solution. Could you please help me? Any enlightment will be very helpful! Disk Utility says "Disk has a few bad sectors". When trying to run the Self-test I get "FAILED (Read)" Here we have what Gparted says about the /dev/sda1 partition (ext4): Flags: boot Status: not mounted Warning: e2label: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1Couldn`t find valid filesystem superblockUnable to read the contents of this filesystem! From sudo fdisk -lI got: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000e0596 Device Boot Start End Blocks Id System/dev/sda1 * 2048 607428607 303713280 83 Linux/dev/sda2 607430654 625141759 8855553 5 Extended/dev/sda5 607430656 625141759 8855552 82 Linux swap / SolarisDisk /dev/sdb: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c3c41 Device Boot Start End Blocks Id System /dev/sdb1 * 63 625137344 312568641 c W95 FAT32 (LBA) " and fromsudo fdisk /dev/sda1I got fdisk: unable to read /dev/sda1: Inappropriate ioctl for device` From sudo mount /dev/sda1 /mntI got: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From sudo update-grubI got: error: cannot read from `/dev/sda'. /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

    Read the article

  • How to rebuild fstab automatically

    - by yvoyer
    I accidentally removed all the entries from the fstab files while doing a backup (Yeah, I know ;)). I would like to know if there is a way to rebuild it with the current mount options, since I did not restart the server since the deletion. If there is no such program, could anybody help me rebuild it. Using this, I have found the command to show the current setup, but I don't know what to do with it. $ sudo blkid /dev/sda1: UUID="3fc55e0f-a9b3-4229-9e76-ca95b4825a40" TYPE="ext4" /dev/sda5: UUID="718e611d-b8a3-4f02-a0cc-b3025d8db54d" TYPE="swap" /dev/sdb1: LABEL="Files_Server_Int" UUID="02fc2eda-d9fb-47fb-9e60-5fe3073e5b55" TYPE="ext4" /dev/sdc1: UUID="41e60bc2-2c9c-4104-9649-6b513919df4a" TYPE="ext4" /dev/sdd1: LABEL="Expansion Drive" UUID="782042B920427E5E" TYPE="ntfs" $ cat /etc/mtab /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0 none /var/lib/ureadahead/debugfs debugfs rw,relatime 0 0 /dev/sdc1 /home ext4 rw 0 0 /dev/sdb1 /media/Files_Server ext4 rw 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /media/Expansion\040Drive fuseblk rw,nosuid,nodev,allow_other,blksize=4096,default_permissions 0 0 gvfs-fuse-daemon /home/yvoyer/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=yvoyer 0 0 /dev/sdd1 /media/Backup500 fuseblk rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions 0 0 /dev/sr0 /media/DIR-615 iso9660 ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 0 0 gvfs-fuse-daemon /home/cdrapeau/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=cdrapeau 0 0

    Read the article

  • Hide icons encrypted file system partitions in Nautilus

    - by Eddy Pronk
    I've installed Ubuntu 10.04 from the alternate CD. It has an encrypted root and swap partition. The root partition is visible in Nautilus as 'File Syste' icon. There is another icon "216 GB Filesystem". If I click it says: Unable to mount 216 GB Filesystem. /dev/mapper/sda5_crypt is mounted. Then there is another icon "6.1 GB Swap Space". If I click it it says: Unable to mount 6.1 GB Swap Space. Not a mountable file system. How can I hide these last two icons? Partition layout: $ sudo fdisk -l /dev/sda [sudo] password for eddyp: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa6e92df4 Device Boot Start End Blocks Id System /dev/sda1 1 11749 94373811 7 HPFS/NTFS /dev/sda2 11871 38914 217219073 5 Extended /dev/sda3 * 11750 11871 976896 83 Linux /dev/sda5 11871 38167 211220480 83 Linux /dev/sda6 38167 38914 5997568 83 Linux Partition table entries are not in disk order Mounted as: $ mount /dev/mapper/sda5_crypt on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda3 on /boot type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/eddyp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=eddyp) /dev/sda1 on /media/S3A6595D003 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

    Read the article

  • Unable to mount an LVM Hard-drive after upgrade

    - by Bruce Staples
    I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

    Read the article

  • Used mountmanager now Ubuntu hangs on boot

    - by fpghost
    I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

    Read the article

  • Reading Serial Data From C (OSX /dev/tty)

    - by Jud Stephenson
    I am trying to read data from a bluetooth barcode scanner (KDC300) using C. Here is the code I have so far, and the program successfully establishes a bluetooth connection to the scanner, but when a barcode is scanned, no input is displayed on the screen (Eventually more will be done with the data, but we have to get it working first, right). Here is the program: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <fcntl.h> #include <errno.h> #include <termios.h> #include <sys/ioctl.h> int main (int argc, const char * argv[]) { // define vars int STOP = 0; //char buf[255]; if(argv[1]) { int fd = open("/dev/tty.KDC1", O_RDONLY); if(fd == -1) { printf("%s", strcat("Unable to open /dev/tty.", argv[1])); } int res; while(STOP == 0) { while((res = read(fd,buf,255)) == 0); { if(res > 0) { buf[res]=0; printf("%s:%d\n", buf, res); if(buf[sizeof(buf)]=='\n') break; } } } } return 0; } If anyone has any ideas, I am at a loss on this so far. If it is any help, I can run screen /dev/tty.KDC1 and any barcodes scanned on the scanner appear in the terminal, I just can't do anything with the data. Jud

    Read the article

  • in MSSQL Server 2005 Dev Edition, I faced index corruption

    - by tranhuyhung
    Hi all, When running stored procedures in MSSQL Server, I found it failed and the DBMS (MSSQL Server 2005 Dev Edition) notified that some indexes are corrupted. Please advice me, here below is DBCC logs: DBCC results for 'itopup_dev'. Service Broker Msg 9675, State 1: Message Types analyzed: 14. Service Broker Msg 9676, State 1: Service Contracts analyzed: 6. Service Broker Msg 9667, State 1: Services analyzed: 3. Service Broker Msg 9668, State 1: Service Queues analyzed: 3. Service Broker Msg 9669, State 1: Conversation Endpoints analyzed: 0. Service Broker Msg 9674, State 1: Conversation Groups analyzed: 0. Service Broker Msg 9670, State 1: Remote Service Bindings analyzed: 0. DBCC results for 'sys.sysrowsetcolumns'. There are 1148 rows in 14 pages for object "sys.sysrowsetcolumns". DBCC results for 'sys.sysrowsets'. There are 187 rows in 2 pages for object "sys.sysrowsets". DBCC results for 'sysallocunits'. There are 209 rows in 3 pages for object "sysallocunits". DBCC results for 'sys.sysfiles1'. There are 2 rows in 1 pages for object "sys.sysfiles1". DBCC results for 'sys.syshobtcolumns'. There are 1148 rows in 14 pages for object "sys.syshobtcolumns". DBCC results for 'sys.syshobts'. There are 187 rows in 2 pages for object "sys.syshobts". DBCC results for 'sys.sysftinds'. There are 0 rows in 0 pages for object "sys.sysftinds". DBCC results for 'sys.sysserefs'. There are 209 rows in 1 pages for object "sys.sysserefs". DBCC results for 'sys.sysowners'. There are 15 rows in 1 pages for object "sys.sysowners". DBCC results for 'sys.sysprivs'. There are 135 rows in 1 pages for object "sys.sysprivs". DBCC results for 'sys.sysschobjs'. There are 817 rows in 21 pages for object "sys.sysschobjs". DBCC results for 'sys.syscolpars'. There are 2536 rows in 71 pages for object "sys.syscolpars". DBCC results for 'sys.sysnsobjs'. There are 1 rows in 1 pages for object "sys.sysnsobjs". DBCC results for 'sys.syscerts'. There are 0 rows in 0 pages for object "sys.syscerts". DBCC results for 'sys.sysxprops'. There are 12 rows in 4 pages for object "sys.sysxprops". DBCC results for 'sys.sysscalartypes'. There are 27 rows in 1 pages for object "sys.sysscalartypes". DBCC results for 'sys.systypedsubobjs'. There are 0 rows in 0 pages for object "sys.systypedsubobjs". DBCC results for 'sys.sysidxstats'. There are 466 rows in 15 pages for object "sys.sysidxstats". DBCC results for 'sys.sysiscols'. There are 616 rows in 6 pages for object "sys.sysiscols". DBCC results for 'sys.sysbinobjs'. There are 23 rows in 1 pages for object "sys.sysbinobjs". DBCC results for 'sys.sysobjvalues'. There are 1001 rows in 376 pages for object "sys.sysobjvalues". DBCC results for 'sys.sysclsobjs'. There are 14 rows in 1 pages for object "sys.sysclsobjs". DBCC results for 'sys.sysrowsetrefs'. There are 0 rows in 0 pages for object "sys.sysrowsetrefs". DBCC results for 'sys.sysremsvcbinds'. There are 0 rows in 0 pages for object "sys.sysremsvcbinds". DBCC results for 'sys.sysxmitqueue'. There are 0 rows in 0 pages for object "sys.sysxmitqueue". DBCC results for 'sys.sysrts'. There are 1 rows in 1 pages for object "sys.sysrts". DBCC results for 'sys.sysconvgroup'. There are 0 rows in 0 pages for object "sys.sysconvgroup". DBCC results for 'sys.sysdesend'. There are 0 rows in 0 pages for object "sys.sysdesend". DBCC results for 'sys.sysdercv'. There are 0 rows in 0 pages for object "sys.sysdercv". DBCC results for 'sys.syssingleobjrefs'. There are 317 rows in 2 pages for object "sys.syssingleobjrefs". DBCC results for 'sys.sysmultiobjrefs'. There are 3607 rows in 37 pages for object "sys.sysmultiobjrefs". DBCC results for 'sys.sysdbfiles'. There are 2 rows in 1 pages for object "sys.sysdbfiles". DBCC results for 'sys.sysguidrefs'. There are 0 rows in 0 pages for object "sys.sysguidrefs". DBCC results for 'sys.sysqnames'. There are 91 rows in 1 pages for object "sys.sysqnames". DBCC results for 'sys.sysxmlcomponent'. There are 93 rows in 1 pages for object "sys.sysxmlcomponent". DBCC results for 'sys.sysxmlfacet'. There are 97 rows in 1 pages for object "sys.sysxmlfacet". DBCC results for 'sys.sysxmlplacement'. There are 17 rows in 1 pages for object "sys.sysxmlplacement". DBCC results for 'sys.sysobjkeycrypts'. There are 0 rows in 0 pages for object "sys.sysobjkeycrypts". DBCC results for 'sys.sysasymkeys'. There are 0 rows in 0 pages for object "sys.sysasymkeys". DBCC results for 'sys.syssqlguides'. There are 0 rows in 0 pages for object "sys.syssqlguides". DBCC results for 'sys.sysbinsubobjs'. There are 0 rows in 0 pages for object "sys.sysbinsubobjs". DBCC results for 'TBL_BONUS_TEMPLATES'. There are 0 rows in 0 pages for object "TBL_BONUS_TEMPLATES". DBCC results for 'TBL_ROLE_PAGE_GROUP'. There are 18 rows in 1 pages for object "TBL_ROLE_PAGE_GROUP". DBCC results for 'TBL_BONUS_LEVELS'. There are 0 rows in 0 pages for object "TBL_BONUS_LEVELS". DBCC results for 'TBL_SUPERADMIN'. There are 1 rows in 1 pages for object "TBL_SUPERADMIN". DBCC results for 'TBL_ADMIN_ROLES'. There are 11 rows in 1 pages for object "TBL_ADMIN_ROLES". DBCC results for 'TBL_ADMIN_USER_ROLE'. There are 42 rows in 1 pages for object "TBL_ADMIN_USER_ROLE". DBCC results for 'TBL_BONUS_CALCULATION_HISTORIES'. There are 0 rows in 0 pages for object "TBL_BONUS_CALCULATION_HISTORIES". DBCC results for 'TBL_MERCHANT_MOBILES'. There are 0 rows in 0 pages for object "TBL_MERCHANT_MOBILES". DBCC results for 'TBL_ARCHIVE_EXPORTED_SOFTPINS'. There are 16030918 rows in 35344 pages for object "TBL_ARCHIVE_EXPORTED_SOFTPINS". DBCC results for 'TBL_ARCHIVE_LOGS'. There are 280 rows in 2 pages for object "TBL_ARCHIVE_LOGS". DBCC results for 'TBL_ADMIN_USERS'. There are 29 rows in 1 pages for object "TBL_ADMIN_USERS". DBCC results for 'TBL_SYSTEM_ALERT_GROUPS'. There are 4 rows in 1 pages for object "TBL_SYSTEM_ALERT_GROUPS". DBCC results for 'TBL_EXPORTED_TRANSACTIONS'. There are 7848 rows in 89 pages for object "TBL_EXPORTED_TRANSACTIONS". DBCC results for 'TBL_SYSTEM_ALERTS'. There are 968 rows in 9 pages for object "TBL_SYSTEM_ALERTS". DBCC results for 'TBL_SYSTEM_ALERT_GROUP_MEMBERS'. There are 1 rows in 1 pages for object "TBL_SYSTEM_ALERT_GROUP_MEMBERS". DBCC results for 'TBL_ESTIMATED_TIME'. There are 11 rows in 1 pages for object "TBL_ESTIMATED_TIME". DBCC results for 'TBL_SYSTEM_ALERT_MEMBERS'. There are 0 rows in 1 pages for object "TBL_SYSTEM_ALERT_MEMBERS". DBCC results for 'TBL_COMMISSIONS'. There are 10031 rows in 106 pages for object "TBL_COMMISSIONS". DBCC results for 'TBL_CATEGORIES'. There are 3 rows in 1 pages for object "TBL_CATEGORIES". DBCC results for 'TBL_SERVICE_PROVIDERS'. There are 11 rows in 1 pages for object "TBL_SERVICE_PROVIDERS". DBCC results for 'TBL_CATEGORY_SERVICE_PROVIDER'. There are 11 rows in 1 pages for object "TBL_CATEGORY_SERVICE_PROVIDER". DBCC results for 'TBL_PRODUCTS'. There are 73 rows in 6 pages for object "TBL_PRODUCTS". DBCC results for 'TBL_MERCHANT_KEYS'. There are 291 rows in 30 pages for object "TBL_MERCHANT_KEYS". DBCC results for 'TBL_POS_UNLOCK_KEYS'. There are 0 rows in 0 pages for object "TBL_POS_UNLOCK_KEYS". DBCC results for 'TBL_POS'. There are 0 rows in 0 pages for object "TBL_POS". DBCC results for 'TBL_IMPORT_BATCHES'. There are 3285 rows in 84 pages for object "TBL_IMPORT_BATCHES". DBCC results for 'TBL_IMPORT_KEYS'. There are 2 rows in 1 pages for object "TBL_IMPORT_KEYS". DBCC results for 'TBL_PRODUCT_COMMISSION_TEMPLATES'. There are 634 rows in 4 pages for object "TBL_PRODUCT_COMMISSION_TEMPLATES". DBCC results for 'TBL_POS_SETTLE_TRANSACTIONS'. There are 0 rows in 0 pages for object "TBL_POS_SETTLE_TRANSACTIONS". DBCC results for 'TBL_CHANGE_KEY_SOFTPINS'. There are 0 rows in 1 pages for object "TBL_CHANGE_KEY_SOFTPINS". DBCC results for 'TBL_POS_RETURN_TRANSACTIONS'. There are 0 rows in 0 pages for object "TBL_POS_RETURN_TRANSACTIONS". DBCC results for 'TBL_POS_SOFTPINS'. There are 0 rows in 0 pages for object "TBL_POS_SOFTPINS". DBCC results for 'TBL_POS_MENUS'. There are 0 rows in 0 pages for object "TBL_POS_MENUS". DBCC results for 'TBL_COMMISSION_TEMPLATES'. There are 23 rows in 1 pages for object "TBL_COMMISSION_TEMPLATES". DBCC results for 'TBL_DOWNLOAD_TRANSACTIONS'. There are 170820 rows in 1789 pages for object "TBL_DOWNLOAD_TRANSACTIONS". DBCC results for 'TBL_IMPORT_TEMP_SOFTPINS'. There are 0 rows in 1 pages for object "TBL_IMPORT_TEMP_SOFTPINS". DBCC results for 'TBL_REGIONS'. There are 2 rows in 1 pages for object "TBL_REGIONS". DBCC results for 'TBL_SOFTPINS'. There are 9723677 rows in 126611 pages for object "TBL_SOFTPINS". DBCC results for 'sysdiagrams'. There are 0 rows in 0 pages for object "sysdiagrams". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTIONS'. There are 9302 rows in 53 pages for object "TBL_SYNCHRONIZE_TRANSACTIONS". DBCC results for 'TBL_SALEMEN'. There are 32 rows in 1 pages for object "TBL_SALEMEN". DBCC results for 'TBL_RESERVATION_SOFTPINS'. There are 131431 rows in 1629 pages for object "TBL_RESERVATION_SOFTPINS". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTION_ITEMS'. There are 5345 rows in 16 pages for object "TBL_SYNCHRONIZE_TRANSACTION_ITEMS". DBCC results for 'TBL_ACCOUNTS'. There are 1 rows in 1 pages for object "TBL_ACCOUNTS". DBCC results for 'TBL_SYNCHRONIZE_TRANSACTION_SOFTPIN'. There are 821988 rows in 2744 pages for object "TBL_SYNCHRONIZE_TRANSACTION_SOFTPIN". *DBCC results for 'TBL_EXPORTED_SOFTPINS'. Msg 8928, Level 16, State 1, Line 1 Object ID 1716917188, index ID 1, partition ID 72057594046119936, alloc unit ID 72057594050838528 (type In-row data): Page (1:677314) could not be processed. See other errors for details. Msg 8939, Level 16, State 7, Line 1 Table error: Object ID 1716917188, index ID 1, partition ID 72057594046119936, alloc unit ID 72057594050838528 (type In-row data), page (1:677314). Test (m_freeData = PAGEHEADSIZE && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 15428 and 7240. There are 2267937 rows in 6133 pages for object "TBL_EXPORTED_SOFTPINS". CHECKDB found 0 allocation errors and 2 consistency errors in table 'TBL_EXPORTED_SOFTPINS' (object ID 1716917188).* DBCC results for 'TBL_DOWNLOAD_SOFTPINS'. There are 7029404 rows in 17999 pages for object "TBL_DOWNLOAD_SOFTPINS". DBCC results for 'TBL_MERCHANT_BALANCE_CREDIT_PAID'. There are 0 rows in 0 pages for object "TBL_MERCHANT_BALANCE_CREDIT_PAID". DBCC results for 'TBL_ARCHIVE_SOFTPINS'. There are 44015040 rows in 683692 pages for object "TBL_ARCHIVE_SOFTPINS". DBCC results for 'TBL_ACCOUNT_BALANCE_LOGS'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_BALANCE_LOGS". DBCC results for 'TBL_BLOCK_BATCHES'. There are 23 rows in 1 pages for object "TBL_BLOCK_BATCHES". DBCC results for 'TBL_BLOCK_BATCH_SOFTPIN'. There are 396 rows in 1 pages for object "TBL_BLOCK_BATCH_SOFTPIN". DBCC results for 'TBL_MERCHANTS'. There are 290 rows in 22 pages for object "TBL_MERCHANTS". DBCC results for 'TBL_DOWNLOAD_TRANSACTION_ITEMS'. There are 189296 rows in 1241 pages for object "TBL_DOWNLOAD_TRANSACTION_ITEMS". DBCC results for 'TBL_BLOCK_BATCH_CONDITIONS'. There are 23 rows in 1 pages for object "TBL_BLOCK_BATCH_CONDITIONS". DBCC results for 'TBL_SP_ADVERTISEMENTS'. There are 6 rows in 1 pages for object "TBL_SP_ADVERTISEMENTS". DBCC results for 'TBL_SERVER_KEYS'. There are 1 rows in 1 pages for object "TBL_SERVER_KEYS". DBCC results for 'TBL_ARCHIVE_DOWNLOAD_SOFTPINS'. There are 27984122 rows in 60773 pages for object "TBL_ARCHIVE_DOWNLOAD_SOFTPINS". DBCC results for 'TBL_ACCOUNT_BALANCE_REQUESTS'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_BALANCE_REQUESTS". DBCC results for 'TBL_MERCHANT_TERMINALS'. There are 633 rows in 4 pages for object "TBL_MERCHANT_TERMINALS". DBCC results for 'TBL_SP_PREFIXES'. There are 6 rows in 1 pages for object "TBL_SP_PREFIXES". DBCC results for 'TBL_DIRECT_TOPUP_TRANSACTIONS'. There are 43 rows in 1 pages for object "TBL_DIRECT_TOPUP_TRANSACTIONS". DBCC results for 'TBL_MERCHANT_BALANCE_REQUESTS'. There are 19367 rows in 171 pages for object "TBL_MERCHANT_BALANCE_REQUESTS". DBCC results for 'TBL_ACTION_LOGS'. There are 133714 rows in 1569 pages for object "TBL_ACTION_LOGS". DBCC results for 'sys.queue_messages_1977058079'. There are 0 rows in 0 pages for object "sys.queue_messages_1977058079". DBCC results for 'sys.queue_messages_2009058193'. There are 0 rows in 0 pages for object "sys.queue_messages_2009058193". DBCC results for 'TBL_CODES'. There are 98 rows in 1 pages for object "TBL_CODES". DBCC results for 'TBL_MERCHANT_BALANCE_LOGS'. There are 183498 rows in 3178 pages for object "TBL_MERCHANT_BALANCE_LOGS". DBCC results for 'TBL_MERCHANT_CHANNEL_TEMPLATE'. There are 397 rows in 2 pages for object "TBL_MERCHANT_CHANNEL_TEMPLATE". DBCC results for 'sys.queue_messages_2041058307'. There are 0 rows in 0 pages for object "sys.queue_messages_2041058307". DBCC results for 'TBL_VNPTEPAY'. There are 0 rows in 0 pages for object "TBL_VNPTEPAY". DBCC results for 'TBL_PAGE_GROUPS'. There are 10 rows in 1 pages for object "TBL_PAGE_GROUPS". DBCC results for 'TBL_PAGE_GROUP_PAGE'. There are 513 rows in 2 pages for object "TBL_PAGE_GROUP_PAGE". DBCC results for 'TBL_ACCOUNT_CHANNEL_TEMPLATE'. There are 0 rows in 0 pages for object "TBL_ACCOUNT_CHANNEL_TEMPLATE". DBCC results for 'TBL_PAGES'. There are 148 rows in 3 pages for object "TBL_PAGES". CHECKDB found 0 allocation errors and 2 consistency errors in database 'itopup_dev'. repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (itopup_dev). DBCC execution completed. If DBCC printed error messages, contact your system administrator.

    Read the article

  • Why is my /dev/random so slow when using dd?

    - by Mikey
    I am trying to semi-securely erase a bunch of hard drives. The following is working at 20-50Mb/s dd if=/dev/zero of=/dev/sda But dd if=/dev/random of=/dev/sda seems not to work. Also when I type dd if=/dev/random of=stdout It only gives me a few bytes regardless of what I pass it for bs= and count= Am I using /dev/random wrong? What other info should I look for to move this troubleshooting forward? Is there some other way to do this with a script or something like makeMyLifeEasy | dd if=stdin of=/dev/sda Or something like that...

    Read the article

  • Dual booting on separate hard drives

    - by tornadorider
    I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

    Read the article

  • How to build glibc 2.11.2 on RHEL5?

    - by netvope
    Using gcc-4.4.4 or 4.5.0, I'm unable to make glibc-2.11.2 on RHEL 5.5: .././scripts/mkinstalldirs /dev/shm/glibc-2.11.2-build/sunrpc/rpcsvc CPP='gcc -B/home/klaw/share/rhel5/ -E -x c-header' /dev/shm/glibc-2.11.2-build/elf/ld-linux-x86-64.so.2 --library-path /dev/shm/glibc-2.11.2-build:/dev/shm/glibc-2.11.2-build/math:/dev/shm/glibc-2.11.2-build/elf:/dev/shm/glibc-2.11.2-build/dlfcn:/dev/shm/glibc-2.11.2-build/nss:/dev/shm/glibc-2.11.2-build/nis:/dev/shm/glibc-2.11.2-build/rt:/dev/shm/glibc-2.11.2-build/resolv:/dev/shm/glibc-2.11.2-build/crypt:/dev/shm/glibc-2.11.2-build/nptl /dev/shm/glibc-2.11.2-build/sunrpc/rpcgen -Y ../scripts -c rpcsvc/bootparam_prot.x -o /dev/shm/glibc-2.11.2-build/sunrpc/xbootparam_prot.T Inconsistency detected by ld.so: dynamic-link.h: 209: elf_get_dynamic_info: Assertion `info[15] == ((void *)0)' failed! make[2]: *** [/dev/shm/glibc-2.11.2-build/sunrpc/xnlm_prot.stmp] Error 127 make[2]: Leaving directory `/dev/shm/glibc-2.11.2/sunrpc' make[1]: *** [sunrpc/others] Error 2 make[1]: Leaving directory `/dev/shm/glibc-2.11.2' make: *** [all] Error 2 The error comes from the ld.so made by glibc: $ elf/ld.so Inconsistency detected by ld.so: dynamic-link.h: 209: elf_get_dynamic_info: Assertion `info[15] == ((void *)0)' failed! $ I got similar error with glibc-2.11.1 (only the line number of dynamic-link.h is different). Any ideas how I can fix this? gcc-4.4.4 and 4.5.0 were compiled with: binutils-2.20.1 gmp-5.0.1 mpc-0.8.2 mpfr-2.4.2

    Read the article

  • Traffic Shaping using tc

    - by Simon
    Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

    Read the article

  • How can i use the `eject` command on a computer i have SSH'd into?

    - by will
    So if i do eject on my machine, it works exactly as expected, however, if i ssh into the machine next to me, and do the same thing, it does not work... my computer: eject: using default device `cdrom' eject: device name is `cdrom' eject: expanded name is `/dev/cdrom' eject: `/dev/cdrom' is a link to `/dev/sr0' eject: `/dev/sr0' is not mounted eject: `/dev/sr0' is not a mount point eject: checking if device "/dev/sr0" has a removable or hotpluggable flag eject: `/dev/sr0' is not a multipartition device eject: trying to eject `/dev/sr0' using CD-ROM eject command eject: CD-ROM eject command succeeded other computer: eject: using default device `cdrom' eject: device name is `cdrom' eject: expanded name is `/dev/cdrom' eject: `/dev/cdrom' is a link to `/dev/sr0' eject: `/dev/sr0' is not mounted eject: `/dev/sr0' is not a mount point eject: checking if device "/dev/sr0" has a removable or hotpluggable flag eject: `/dev/sr0' is not a multipartition device eject: unable to open `/dev/sr0' if i look in the /dev/ dir, then i find cdrom which is a symlink to sr0 - as mentioned by the verbose outputs of eject -v. On my machine, if i try and look at it, if the drive is open, it will close it, and then give this: $ less sr0 sr0 is not a regular file (use -f to see it) so $ less -f sr0 sr0: No medium found but if i do it on the other computer, $ less -f sr0 sr0: Permission denied so i look at the files more, and get this on both machines: $ ls -la sr0 brw-rw----+ 1 root cdrom 11, 0 Nov 12 10:13 sr0 Does anyone know a way around this? I do not have root access.

    Read the article

  • ipv6 with KVM on debian

    - by Eliasdx
    I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

    Read the article

  • ipv6 with KVM on debian

    - by Eliasdx
    I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

    Read the article

  • Java Google App Engine inconsistent data lose after restarting dev server

    - by user259349
    Hello everyone, I am using Java GAE. So far, i'm just scafolding my data objects and i'm seeing an interesting issue. The records that i am playing around with are getting updated properly as long as my dev server is running up. The second that the my dev server gets restarted, i lose all of my changes. That would be not alarming if i lost all of my records, but, there was a point of time where my data persisted through the server restart. I'm worried that i would lose production data if i launched without fixing this potential bugs? ANy idea on wher ei should look?

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >