Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 15/1029 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Repair BAD Sectors or Buy a new HDD?

    - by Nehal J. Wani
    I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

    Read the article

  • Cloned Windows 7 to new HDD and want to change the drive letter to C

    - by Hoppe
    I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

    Read the article

  • Fixing Windows install by connecting it's hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Fixing Windows install by connecting its hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Disc drive busy on MacBook, with disc stuck inside.

    - by ayaz
    I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

    Read the article

  • Webcast Q&A: Demystifying External Authorization

    - by B Shashikumar
    Thanks to everyone who joined us on our webcast with SANS Institute on "Demystifying External Authorization". Also a special thanks to Tanya Baccam from SANS for sharing her experiences reviewing Oracle Entitlements Server. If you missed the webcast, you can catch a replay of the webcast here.  Here is a compilation of the slides that were used on today's webcast.  SANS Institute Product Review: Oracle Entitlements Server We have captured the Q&A from the webcast for those who couldn't attend. Q: Is Oracle ADF integrated with Oracle Entitlements Server (OES) ? A:  In Oracle Fusion Middleware 11g and later, Oracle ADF, Oracle WebCenter, Oracle SOA Suite and other middleware products are all built on Oracle Platform Security Services (OPSS). OPSS privodes many security functions like authentication, audit, credential stores, token validaiton, etc. OES is the authorization solution underlying OPSS. And OES 11g unifies different authorization mechanisms including Java2/ABAC/RBAC.  Q: Which portal frameworks support the use of OES policies for portal entitlement decisions? A:  Many portals including Oracle WebCenter 11g  run natively on top of OES. The authorization engine in WebCenter is OES. Besides, OES offers out of the box integration with Microsoft SharePoint. So SharePoint sites, sub sites, web parts, navigation items, document access control can all be secured with OES. Several other portals have also been secured with OES ex: IBM websphere portal Q:  How do we enforce Seperation of Duties (SoD) rules using OES (also how does that integrate with a product like OIA) ? A:  A product like OIM or OIA can be used to set up and govern SoD policies. OES enforces these policies at run time. Role mapping policies in OES can assign roles dynamically to users under certain conditions. So this makes it simple to enforce SoD policies inside an application at runtime. Q:  Our web application has objects like buttons, text fields, drop down lists etc. is there any ”autodiscovery” capability that allows me to use/see those web page objects so you can start building policies over those objects? or how does it work? A:  There ae few different options with OES. When you build an app, and make authorization calls with the app in the test environment, you can put OES in discovery mode and have OES register those authorization calls and decisions. Instead of doing  this after the fact, an application like Oracle iFlex has built-in UI controls where when the app is running, a script can intercept authorization calls and migrate those over to OES. And in Oracle ADF, a lot of resources are protected so pages, task flows and other resources be registered without OES knowing about them. Q: Does current Oracle Fusion application use OES ? The documentation does not seem to indicate it. A:  The current version of Fusion Apps is using a preview version of OES. Soon it will be repalced with OES 11g.  Q: Can OES secure mobile apps? A: Absolutely. Nowadays users are bringing their own devices such as a a smartphone or tablet to work. With the Oracle IDM platform, we can tie identity context into the access management stack. With OES we can make use of context to enforce authorization for users accessing apps from mobile devices. For example: we can take into account different elements like authentication scheme, location, device type etc and tie all that information into an authorization decision.  Q:  Does Oracle Entitlements Server (OES) have an ESAPI implementation? A:  OES is an authorization solution. ESAPI/OWASP is something we include in our platform security solution for all oracle products, not specifically in OES Q:  ESAPI has an authorization API. Can I use that API to access OES? A:  If the API supports an interface / sspi model that can be configured to invoke an external authz system through some mechanism then yes

    Read the article

  • Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

    - by Espionage724
    It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

    Read the article

  • Migrate Windows Server 2008 to a new hard disk

    - by MainMa
    Hi, I have a machine with Windows Server 2008. I want to change the hard disk drive, but keep everything else. I don't have a cd/dvd drive and don't want to buy it. My first idea was to make a byte-to-byte copy of the disk with Paragon Advanced Recovery. The problem is that when I try to boot from a new hard disk, it says that there were hardware changes and that Windows must be repaired, inviting me to insert the installation disk and follow repair instructions. I searched and found that 1:1 copy is not a correct way to do things. The correct one is to restore Windows to a new hard disk from a full system backup. But to restore, I need to have a dvd drive. I tried to make a copy of the Windows Server 2008 .iso on an USB flash drive, but the drive is not bootable (while the same procedure applied to Paragon Advanced Recovery ISO produces a bootable recovery USB flash drive). Now what else can I do (except buying a dvd drive)? Is there a way either to make Windows work without doing recovery or recover Windows 2008 without using a cd drive?

    Read the article

  • How can I keep a folder synchronized to an external USB hard drive in Ubuntu?

    - by Cesar
    I have a growing music collection which I manually keep in sync with an external USB drive. Sometimes I edit their ID3 tags, add or delete a file in either the hard drive or the USB drive, and I would like to keep those changes synchronized between both. Does Ubuntu has something available that would help me with this scenario? Preferably something easy to use with a UI. Update: To clarify my question, changes may happen on both the local hard drive or the USB drive, so the sync process must be on both directions.

    Read the article

  • Repointing iTunes library from failed external drive to local drive

    - by Andy White
    Up until recently I had my iTunes library on an external drive, but the drive was beginning to act up, so as a precaution, I copied all the media files onto my local hard-drive. My external drive is now completely dead, so I'm in a situation where iTunes is still looking for the files on my F: drive, but the drive is gone, so the library references are now all broken links. A complete copy of the library is on my C: drive, so I'm curious what would be the easiest way to repoint my library to the media files on C:? Should I just clear out my library in iTunes and just import the files from C:? Or is there a more automatic way? I don't think I can use the "Consolidate Library" function in iTunes, b/c I no longer have access to the original library media files.

    Read the article

  • How to mount an external Soundcard during startup?

    - by Moe
    I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

    Read the article

  • How to Format a USB Drive in Ubuntu Using GParted

    - by Trevor Bekolay
    If a USB hard drive or flash drive is not properly formatted, then it will not show up in the Ubuntu Places menu, making it hard to interact with. We’ll show you how to format a USB drive using the tool GParted. Note: Formatting a USB drive will destroy any data currently stored on it. If you think that your USB drive is already properly formatted, but Ubuntu just isn’t picking it up, try unplugging it and plugging it back in to a different USB slot, or restarting your machine with the device plugged in on start-up. Open a terminal by clicking on Applications in the top-left of the screen, then Accessories > Terminal. GParted should be installed by default, but we’ll make sure it’s installed by entering the following command in the terminal: sudo apt-get install gparted To open GParted, enter the following command in the terminal: sudo gparted Find your USB drive in the drop-down box at the top right of the GParted window. The drive should be unallocated – if it has a valid partition on it, then you may be looking at the wrong drive. Note: Make sure you’re on the correct drive, as making changes on the wrong hard drive with GParted can delete all data on a hard drive! Assuming you’re on the right drive, right-click on the unallocated grey block and click New. In the window that pops up, change the File System to fat32 for USB Flash Drives, NTFS for USB Hard Drives that will be used in Windows, or ext3/ext4 for USB Hard Drives that will be used exclusively in Linux. Add a label if you’d like, and then click Add. Click the green checkmark and then the Apply button to apply the changes. GParted will now format your drive. If you’re formatting a large USB Hard Drive, this can take some time. Once the process is done, you can close GParted, and the drive will now show up in the Places menu. Clicking on the drive will mount it and open it in a File Browser window. It will also add a shortcut to the drive on the Desktop by default. Your USB drive is now ready to store your files! Similar Articles Productive Geek Tips Using GParted to Resize Your Windows Vista PartitionInstall an RPM Package on Ubuntu LinuxCreate a Persistent Bootable Ubuntu USB Flash DriveShare Ubuntu Home Directories using SambaCreate a Samba User on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Running UBUNTU from a USB Flash drive on Acer

    - by Byron Blue
    I've made a bootable USB flash drive to run UBUNTU. The drive works fine on MOST laptops/computers I try: It does not want to start on my (favourite) Acer Aspire 5745 (Windows 7 64 bit). The opening screen has SYSLINUX 4.06 EDD 4.06-pre1 (...) and simply sits there. I was using UBUNTU 12.04.1 64 bit until I tried booting to the Acer this morning. I've tried booting to 10.04 as well (saw this as a fix on a discussion) with the same result. I really want to use the Acer for development and do not want to wipe my Windows 7 from the hard disk. Are there any solutions/answers?

    Read the article

  • Ubuntu - Automatically mount external drives to /media/LABEL on boot without a user logged in?

    - by endolith
    This question is similar, but kind of the opposite of what I want. I want external USB drives to be mounted automatically at boot, without anyone logged in, to locations like /media/<label>. I don't want to have to enter all the data into fstab, partially because it's tedious and annoying, but mostly because I can't predict what I'll be plugging into it or how the partitions will change in the future. I want the drives to be accessible to things like MPD, and available when I log in with SSH. gnome-mount seems to only mount things when you are locally logged into a Gnome graphical session.

    Read the article

  • Ubuntu - How to automount an external drive at a preconfigured mount point?

    - by Lars Haugseth
    Normally, when I attach an external USB drive to my Ubuntu system, the filesystem on it are automounted to /media/label. However, I'd like the filesystem to be mounted at a mount point of my choosing. I've added a line like this to my /etc/fstab: UUID=2BE905C238C1F724 /p ntfs-3g defaults 0 0 # Passport 320GB This allows me to manually mount the volume at /p by running sudo mount /p, however the filesystem is no longer automounted when the drive is attached to the PC. What do I need to do to get automount to this mount point to work, if at all possible?

    Read the article

  • External display suddenly not detected

    - by NChase
    I have a Lenovo IdeaPad U410 running Ubuntu Desktop 13.04. I have an external monitor that I connect to via HDMI, and it's worked flawlessly for six months. I plug in my laptop, it detects the display. The "change display" key built into the laptop works for switching between the two screens. Never any problems. This afternoon, when I reconnected my computer after taking it into another room for a bit, it didn't work. When I open up Display settings, it can't detect the display. I tried disconnecting/reconnecting everything multiple times. And most strangely, that same "change display" key now behaves like a Super key, opening the dash instead of toggling the display. Nothing at all changed between when I plugged it in this morning and when it stopped working a few hours later. I tried xrandr, that doesn't detect it either. Anyone have any ideas?

    Read the article

  • Creating a bootable USB recovery drive to be used by someone who isn't computer savvy

    - by David
    I am looking for a way to prepare an image of an Ubuntu machine which would be bootable and installable in the easiest way possible. I'm actually preparing an Ubuntu machine for someone living far, and not computer savvy. If he ever has troubles with his installation, he could just put a USB drive in, boot the machine and everything would be resetted for him. I know there are many methods of creating/loading an image of a drive, but the ones I've found so far have complicated menus with several options to choose from, etc. Ideally, perhaps only asking a Yes/No question such as "Would you like to reinstall?" would be great. Does such a tool exist? Thank you in advance!

    Read the article

  • Plugging two external screens to laptop via VGA and HDMI

    - by avilella
    I have an Asus U30JC laptop with a VGA and HDMI ports. I can connect my external screen (1920x1200) to either of those ports but I wonder if I would be able to use two screens at the same time, one plugged to the VGA and the other to the HDMI socket. Any ideas? Where should I find out? Doing xrandr, I get: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

    Read the article

  • Pointer problem on external monitor

    - by Herby Pepper
    Pointer looks and work fine on laptop but when I connect external monitor it appears there as a shaking, square shape. Videos are not showing either. my laptop hp 2133: Graphic card: VIA Technologies, Inc. CN896/VN896/P4M900, Chrome 9 HC. System: Lubuntu 12.04 I think it is graphic problem but can't find drivers for my card and system. I do have xserver-xorg-video-openchrome and disper installed. I did not have that problem with Lubuntu 11.10. My problem is a bit like : Mouse pointer strange problem but it was not solved so I decided to post my question.

    Read the article

  • eepc 100h ubuntu 12.04 external monitor higher resolution modes force a rotated display

    - by Acky
    Hi I have a eeepc 1000h netbook. I've just installed ubuntu. I mainly use an external display (samsung ta350 full hd 22 inch affair) but when I select 1080 from the dropdown list, my only options are for a rotated portrait. My neck's non too supple, so tilting my head for extended periods is not really viable. :-) Any ideas on making ubuntu display 1080 normal landscape? It must surely be possible. My gparted boot cd does it perfectly. Any help greatly appreciated. Cheers!

    Read the article

  • Floppy Drive not recognised

    - by Art
    I am a newbie with Ubuntu during the past two weeks, and I believe, that I have made good progress so far. Current setup tasks are completed, like: "Wireless Network, Printer, Thunderbird + Firefox, e-mail", also my local weather station - all setup. Updated files and rearranged the desktop to my liking. The problem I have now is my floppy drive which is not recognized, but the activity light is shown on constantly. I have downloaded the "MakeFloppyDriveAvailableToEveryone" and i am confident that I can follow the instructions to change the floppy drive. However, I do not have an existing fd0 file in /dev/???, but only /dev/fd/ files 0 to 46. Please advise.

    Read the article

  • external disk dont work on ubuntu

    - by Skirki
    i have problem with in my ubuntu: when i connect external imation apollo disc i dont see a file system. Disk is working because in windows OS on this same computer it works as well. when i typed dmesg i got following logs [12913.260078] usb 4-1: new low speed USB device using ohci_hcd and address 15 [12913.440072] usb 4-1: device descriptor read/64, error -62 [12913.730058] usb 4-1: device descriptor read/64, error -62 [12914.020085] usb 4-1: new low speed USB device using ohci_hcd and address 16 [12914.200082] usb 4-1: device descriptor read/64, error -62 [12914.490150] usb 4-1: device descriptor read/64, error -62 [12914.780064] usb 4-1: new low speed USB device using ohci_hcd and address 17 [12915.200070] usb 4-1: device not accepting address 17, error -62 [12915.380081] usb 4-1: new low speed USB device using ohci_hcd and address 18 [12915.800065] usb 4-1: device not accepting address 18, error -62 [12915.800100] hub 4-0:1.0: unable to enumerate USB device on port 1 i trying to fix that by use commands: cd /sys/bus/pci/drivers/ehci_hcd echo -n "0000:00:02.1" unbind but it did not match the result and i don't have any other idea

    Read the article

  • default mount point changed for external HD

    - by JhmL
    The default mount point for my external HD changed when upgrading from 13.04 to 13.10. Now the username is added as an extra level before the hd label. So it used to be /media/nameofhd and now it became /media/username/nameofhd This breaks a lot of links I have set up to this disk. I know that I can mount it manually and even automatically through /etc/fstab. What I want to know is why this behaviour changed and how I can change it back to the original? blkid and fdisk don't show anything suspicious. thx!

    Read the article

  • Control external monitor brightness

    - by remi
    Hello Ubuntu community, I can control the brightness of my DELL U2713HM connected with DisplayPort via the command: ddccontrol -p -r 0x10 -w 53 where in this example the number 53 represents the brightness level (range 0 to 100). But I don't know how to link the command to my brightness keys on my keyboard. I searched already, but just found answers to integrated laptop screens. In /sys/class/backlight is the folder acpi_video0 with some subfolders and files. The file actual_brightness contains a number from 0 to 20, which is changing when I press the brightness keys. How do I get my external monitor listed as a device in /sys/class/backlight ? PS: I am running a fresh Ubuntu 12.10 install with integrated graphics Intel HD4000.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >