Search Results

Search found 1429 results on 58 pages for 'fan'.

Page 15/58 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Black Screen and System Hang - Possibly CPU overheating

    - by Mahesh
    I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

    Read the article

  • Laptop Acer Travelmate 4050 takes over 10 Mins to POST

    - by Belliez
    Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

    Read the article

  • Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

    - by Wesley
    Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

    Read the article

  • New build won't boot: some fans turning, no beep or video

    - by Dave
    When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

    Read the article

  • Looking for comprehensive computer monitoring software

    - by cornjuliox
    Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

    Read the article

  • Windows 7 hangs after going into sleep a second time

    - by Brian Stephenson
    I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

    Read the article

  • Linux Mint Constantly freezing on Dell XPS L502X

    - by Josh
    I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

    Read the article

  • Troubleshooting an overheating CPU

    - by Jeff Fry
    I & my father just recently put together a new PC. Specs below. From the very beginning, on boot it will often complain that the CPU is too hot. If I sit in BIOS and watch the CPU, it'll drop back down from red to blue (<72C), at which point I've tended to just boot into Windows...and haven't had any problems. In fact, I've played a couple hours straight of Skyrim at max settings, and not had any visible issues. That said, I've occasionally walked away & come back to find that it's crashed. Yesterday, it crashed (while idle) twice in 12 hours, which shifted the balance from busy-with-life to nervous-I'm-about-to-melt-something. I just installed Core Temp which is showing my 4 cores fluxuating between 70-98C. I'm guessing at this point that the CPU fan may be incorrectly installed or defective. My first thought is to either (a) add water cooling (which the case supports) and / or (b) replace the CPU fan with an after-market one. That said, I'm very open to suggestions. A note, while I certainly don't want to burn money here, I have a baby coming any day now and am still unpacking from a recent move so if I have a choice between an option that costs money and another that takes a while...I'll happily spend a bit extra. Side question: Should I be nervous to even have this on at this point? Let me know if there's something useful I could add to my report. Otherwise, I'm looking forward to your suggestions! Thanks. CPU Intel i7-2600 CPU w/ stock fan Other HW ASUS P8Z68-V Pro motherboard 64G SSD boot drive 4 older SATA HDs GIGABYTE ATI Radeon HD6950 1 GB DDR5 8G Kingston T1 Series RAM Corsair 650W Gold Certified power supply Antec P280 case

    Read the article

  • Content for fans and non fans fbml?

    - by Jamie redmond
    I know that using fb:visible-to-conection allows you to display content to fans but how do I hide content from fans? Example if I have "you must be fan to view this" how do I remove that text when they are a fan? I'm using static fbml app btw. Any help appreciated.

    Read the article

  • How to design a command line program and keep it open for a future GUI?

    - by systempuntoout
    What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Example scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decide to take the sources and build a GUI on them. he gives up because my code is a mess How do i avoid step 4 and let unicorn fan programmer build his GUI without hassle?

    Read the article

  • Facebook Graph API - likes returns me an empty set...

    - by Vinch
    When I try to get all my "likes" (formerly fan pages) on Facebook Graph API, sometimes it returns me an empty set: { "data": [ ] } I tried with https://graph.facebook.com/me/likes?access_token=MY_ACCESS_TOKEN and with graph.facebook.com/vinch/likes?access_token=MY_ACCESS_TOKEN but the result is exactly the same (empty). Any idea of what it can be? I need it to know if a user likes (is fan of) a specific page.

    Read the article

  • How to design a command line program reusable for a future development of a GUI?

    - by systempuntoout
    What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Possible scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decides to take the sources and build a GUI on them. he\she gives up because my code is not reusable How do i avoid step four and let unicorn fan programmer build his\her GUI without hassle?

    Read the article

  • Is there a way to make PHP's SplHeap recalculate? (aka: add up-heap to SplHeap?)

    - by md2k7
    I am using an SplHeap to hold graph nodes of a tree with directed edges that will be traversed from the leaves to the root. For this, I precalculate the "fan-in" of nodes and put them into the heap so that I can always retrieve the node with the smallest fan-in (0) from it. After visiting a node, I reduce the fan-in of its successor by 1. Then obviously, the heap needs to be recalculated because the successor is now in the wrong place there. I have tried recoverFromCorruption(), but it doesn't do anything and keeps the heap in the wrong order (node with larger fanIn stays in front of smaller fanIn). As a workaround, I'm now creating a new heap after each visit, amounting to a full O(N*log(N)) sort each time. It should be possible, however, to make up-heap operations on the changed heap entry until it's in the right position in O(log(N)). The API for SplHeap doesn't mention an up-heap (or deletion of an arbitrary element - it could then be re-added). Can I somehow derive a class from SplHeap to do this or do I have to create a pure PHP heap from scratch? EDIT: Code example: class VoteGraph { private $nodes = array(); private function calculateFanIn() { /* ... */ } // ... private function calculateWeights() { $this->calculateFanIn(); $fnodes = new GraphNodeHeap(); // heap by fan-in ascending (leaves are first) foreach($this->nodes as $n) { // omitted: filter loops $fnodes->insert($n); } // traversal from leaves to root while($fnodes->valid()) { $node = $fnodes->extract(); // fetch a leaf from the heap $successor = $this->nodes[$node->successor]; // omitted: actual job of traversal $successor->fanIn--; // will need to fix heap (sift up successor) because of this //$fnodes->recoverFromCorruption(); // doesn't work for what I want // workaround: rebuild $fnodes from scratch $fixedHeap = new GraphNodeHeap(); foreach($fnodes as $e) $fixedHeap->insert($e); $fnodes = $fixedHeap; } } } class GraphNodeHeap extends SplHeap { public function compare($a, $b) { if($a->fanIn === $b->fanIn) return 0; else return $a->fanIn < $b->fanIn ? 1 : -1; } }

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Experience the iPad UI On Your PC

    - by Matthew Guay
    Want to test drive iPad without heading over to an Apple store?  Here’s a way you can experience some of the iPad UI straight from your browser! The iPad is the latest gadget from Apple to wow the tech world, and people even waited in line all night to be one of the first to get their hands on one.  Thanks to a simple JavaScript trick, however, you can get a feel for some of its new features without leaving your computer.  This won’t let you try out everything on the iPad, but it will let you see how the new lists and pop-over menus work just like they do in the new apps. Test drive the iPad’s UI from your browser Normally, the Apple iPhone developer library online looks like a standard webpage. But, on the iPad, it looks and feels like a full-blown native iPad app.  With a nifty JavaScript trick from boredzo.org you can use this same interface on your PC.  Since the iPad uses the Safari browser, we ran this test in Safari for Windows.  If you don’t already have it installed, you can download it from Apple (link below) and setup as normal. Now, open Safari and browse to Apple’s developer page at: http://www.developer.apple.com   Now, enter the following in the address bar, and press Enter. javascript:localStorage.setItem('debugSawtooth', 'true')   Finally, click this link to go to the iPhone OS documentation. http://developer.apple.com/iphone/library/iPad/ After a short delay, it should open in full iPad style! The left menu works just like the menus on the iPad, complete with transitions.  It feels entirely like a native application, instead of a webpage.  To scroll through text, click and pull up or down similar to the way you would use it on a touch screen. Some pages even include a pop-over menu like many of the new iPad apps use. Note that the page will be rendered for the size of your browser, and if you resize your window the page will not resize with it.  Simply press F5 to reload the page, and it will resize to fit the new window size.  If you resize your window to be tall and narrow, like the iPad in horizontal mode, the webpage will change and the left menu will disappear in lieu of a drop-down menu just like it would if you rotated the iPad. This works in Chrome as well, since it, like Safari, is based on Webkit.  However, it didn’t seem to work in our test on Firefox or other browsers. We’ve previously covered how you can experience some of the iPhone’s UI with the online iPhone user guide.  Check it out if you haven’t yet: View Mobile Websites in Windows with Safari 4 Developer Tools Conclusion Although this doesn’t let you really try out all of the iPad’s interface, it at least gives you a taste of how it works.  It’s exciting to see how much functionality can be packed into webapps today.  And don’t forget, How-to Geek is giving away an iPad to a random fan!  Head over to our Facebook page and fan How-to Geek if you haven’t already done so. Win an iPad on the How-To Geek Facebook Fan Page Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]The Complete List of iPad Tips, Tricks, and TutorialsShare Your Windows Vista Experience Index ScoreAnother Blog You Should Subscribe To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

    Read the article

  • Mobile Deals: the Consumer Wants You in Their Pocket

    - by Mike Stiles
    Mobile deals offer something we talk about a lot in social marketing, relevant content. If a consumer is already predisposed to liking your product and gets a timely deal for it that’s easy and convenient to use, not only do you score on the marketing side, it clearly generates some of that precious ROI that’s being demanded of social. First, a quick gut-check on the public’s adoption of mobile. Nielsen figures have 55.5% of US mobile owners using smartphones. If young people are indeed the future, you can count on the move to mobile exploding exponentially. Teens are the fastest growing segment of smartphone users, and 58% of them have one. But the largest demographic of smartphone users is 25-34 at 74%. That tells you a focus on mobile will yield great results now, and even better results straight ahead. So we can tell both from statistics and from all the faces around you that are buried in their smartphones this is where consumers are. But are they looking at you? Do you have a valid reason why they should? Everybody likes a good deal. BIA/Kelsey says US consumers will spend $3.6 billion this year for daily deals (the Groupons and LivingSocials of the world), up 87% from 2011. The report goes on to say over 26% of small businesses are either "very likely" or "extremely likely" to offer up a deal in the next 6 months. Retail Gazette reports 58% of consumers shop with coupons, a 40% increase in 4 years. When you consider that a deal can be the impetus for a real-world transaction, a first-time visit to a store, an online purchase, entry into a loyalty program, a social referral, a new fan or follower, etc., that 26% figure shows us there’s a lot of opportunity being left on the table by brands. The existing and emerging technologies behind mobile devices make the benefits of offering deals listed above possible. Take how mobile payment systems are being tied into deal delivery and loyalty programs. If it’s really easy to use a coupon or deal, it’ll get used. If it’s complicated, it’ll be passed over as “not worth it.” When you can pay with your mobile via technologies that connects store and user, you get the deal, you get the loyalty credit, you pay, and your receipt is uploaded, all in one easy swipe. Nothing to keep track of, nothing to lose or forget about. And the store “knows” you, so future offers will be based on your tastes. Consider the endgame. A customer who’s a fan of your belt buckle store’s Facebook Page is in one of your physical retail locations. They pull up your app, because they’ve gotten used to a loyalty deal being offered when they go to your store. Voila. A 10% discount active for the next 30 minutes. Maybe the app also surfaces social references to your brand made by friends so they can check out a buckle someone’s raving about. If they aren’t a fan of your Page or don’t have your app, perhaps they’ve opted into location-based deal services so you can still get them that 10% deal while they’re in the store. Or maybe they’ve walked in with a pre-purchased Groupon or Living Social voucher. They pay with one swipe, and you’ve learned about their buying preferences, credited their loyalty account and can encourage them to share a pic of their new buckle on social. Happy customer. Happy belt buckle company. All because the brand was willing to use the tech that’s available to meet consumers where they are, incentivize them, and show them how much they’re valued through rewards.

    Read the article

  • Facebook: Social Widgets versus Share

    - by just_wes
    Hello all, I am interested in people's thoughts on Facebook's new social widgets thing. Most notably the new "Like" button. The concept I am struggling with is the difference between "Like" and "Share". I have an existing Connect application. This application has its own fan page on Facebook. People can become "Fans" of the page and register to receive email updates and the like. The application is currently programmed to update its own fan page any time content is added to the site. Enter Social Widgets and "Like". People who visit our site can currently "share" our content on Facebook. With "Share" they can post a full item to their wall with a comment or send the content item as a message to another Facebook user. "Like" seems to do the same thing minus the message part. However "Like" automatically subscribes people to the fan page. My question is simply, should I add "Like" to my existing Connect site? Is "Like" different than what I already have? Are Social Widgets the future of Connect? Thanks!

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • Computer wont POST after power outage

    - by aaron
    I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

    Read the article

  • How to stop blanking screen although I am active on Ubuntu Karmic on old IBM Laptop

    - by Glen S. Dalton
    How to stop blanking screen although I am active on Ubuntu Karmic on old IBM Laptop 600E? After some time of working on the machine the screen goes blank. When I hit ESC on the built-in keyboard (not on the attached USB keyboard where I work) it comes back and everything works fine until the next screen-blanking. I suspect it is some power management issue. When I use an old keyboard that has a ps2 connector it does not happen. So my guess is that the usb keyboard does not update the power management timer that detects when the session was last used? I am using fluxbox window manager. I do not want to disable power management because it is nice that the fan only works at the necessary speed (the fan spped is regulated which I can hear) But I could disable power management for testing purposes.

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • Power Supply Not Working?

    - by Mr.Glass
    So I recently made some purchases for a new computer including: Motherboard: Gigabyte GA-EP45-UD3R CPU : Intel Core2Quad 2.66Ghz Power Supply: Antec Basiq 500w UPDATE: I got the Power Supply working, the motherboard's lights come on, the video card fan spins, BUT the CPU fan does NOT spin and there is no video. Whats the possibility of lacking power? In the mobo guide it says the use of a power supply providing a 2x4 12V connector is recommended (I do not have this connector) by the CPU manufacturer when using an Intel Extreme Edition (I'm using Core2Quad) UPDATE: Got it working, intstalling windows 7 now. THANKS GUYS!!

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >