Search Results

Search found 1258 results on 51 pages for 'grant roy'.

Page 15/51 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Dell XPS 420: Turning computer on, video ports showing static

    - by Roy Rico
    I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

    Read the article

  • Dual boot Windows XP 32 bit and Windows 7 64-bit

    - by Santanu Roy
    My system config is AMD phenom-II x2 550 processor, 2x2gb(800fsb)ddr2 zion ram, gigabyte ga-m61pme-s2 motherboard, 160gb sata hdd. Now I am planning to install Windows XP sp3 (32-bit) and Windows 7 (64bit). My first questions are: Is my system enough for the above mentioned two OSes? Which OS one should be installed first on local disk c: drive? I have both XP and vista drivers on separate disks as provided with my motherboard but don't have drivers for win-7, so can I use my vista driver for win-7?

    Read the article

  • VirtualBox (Windows XP guest on Ubuntu host) through X11?

    - by Roy Rico
    I'd like to host a VirtualBox instance on my Ubuntu machine, using Windows XP as my Guest machine. I'd like to know if I can use an X11 ZZZZZZZZ (Xming/Putty/SSH -X) to run VirtualBox on my Windows 7 machine remotely. Also, if it is possible, could I disconnect from it (while it's still running) and reconnect to it from a different machine?

    Read the article

  • Running DNS locally for home network

    - by Roy Rico
    I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

    Read the article

  • VirtualBox (windows XP guest on Ubuntu host) thru X11?

    - by Roy Rico
    Hi, I'd like to host a VirtualBox instance on my ubuntu machine, using WindowsXP as my Guest machine. I'd like to know if i can use an X11 ( Xming/Putty/SSH -X) to run VirtualBox on my Windows 7 machine remotely. Also, if it is possible, could i disconnect from it (while it's still running) and reconnect to it from a different machine?

    Read the article

  • Building optimal custom machine for Sql Server

    - by Chad Grant
    Getting the hardware in the mail any day. Hardware related to my question: x10 15.5k RPM SAS Segate Cheetah's x2 Adaptec 5405 PCIe Raid cards Motherboard has integrated SAS raid. Was thinking I would build 2 RAID 10 arrays one for data and one for logs The remaining 2 drives a RAID 0 for TempDB Will probably throw in a drive for OS. Does putting the Sql Server application / exe's on a raid make a difference and is there any impact of leaving the OS on a relatively slow disk compared to the raid arrays? I have 5/6 DBs combined < 50 gigs. With a relatively good / constant load. Estimating 60-7% reads vs writes. Planning on using log shipping as well if that matters. Any advice or suggestions?

    Read the article

  • Cannot install SQL 2008 Workstation Components on Windows XP SP2

    - by Grant
    Hi, i am trying to install the workstation components of sql server 2008 on my windows xp sp2 machine and during the setup, the only options i have to install are the database engine and sdk. all of the other options including books, workstation components are missing. Using the same installer disks i was able to install the whole works on a server. I do not have any version of sql currently installed on the xp machine.. am i doing something wrong?

    Read the article

  • Using Sigmatel STAC 92XX on Windows 7 RTM x64, cannot get 5.1 surround sound to work

    - by Roy Rico
    I have a Dell XPS 420. I've installed Windows 7 RTM (x64) I have this audio device: SIGMATEL STAC 92XX C-Major HD Audio I have tried using the windows 7 basic driver, and also the Vista 64-bit driver from Dell's website (details): Date: 10/29/2007 Version: 6.10.0.5511, A04 File Size: 7 MB With both drivers, I get normal stereo sound from the driver, but my 5.1 surround sound doesn't work. Has anyone experienced this? Is there a fix?

    Read the article

  • problems mounting an external IDE drive via USB in ubuntu

    - by Roy Rico
    I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

    Read the article

  • Recommended CPU upgrade for Dell Vostro 220 with E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • mobile broadband recommendations for Lenovo T500

    - by Justin Grant
    I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

    Read the article

  • What is the keyboard shortcut to clear formatting on Office 2008 Mac?

    - by Laurent Bourgault-Roy
    I recently switched from a PC to a brand new Macbook Pro. I was happy to see that most of the keyboard shortcuts in Word 2008 where the same or almost the same than in Word 2007. However, there is one keyboard shortcut that I dearly miss : the clear formatting shortcut (ctrl + space on Windows). I know the feature exists since it's in the formatting bar, but I can't find the keyboard shorcut. I tried cmd + space but that is the system keyboard shortcut to switch the keyboard type. alt + space delete the text without deleting the formatting. ctrl + space doesn't seem to do anything. Does anyone know what the keyboard shortcut for the clear formatting command may be? I hope there's one because it's really painful to reach for the mouse everytime I put a title and I want to switch to a normal paragraph style...

    Read the article

  • What are the advantages and disadvantages of having a hosted firewall?

    - by Roy
    Would you rather have your firewall hosted or in house if you've got the skills to manage it? We currently have 6 remote offices and 2 different ISP's, one private network and our firewall (Watchguard, licenses are due to expire) is also our main gateway. I don't see how a hosted firewall (in this case Fortinet) is going to work for us especially when it's cheaper to buy our own firewall and the transition from one ISP to a new provider will take some time because our current contracts aren't due to expire soon. What are to pros and cons of having a firewall hosted by your ISP in general?

    Read the article

  • Codec Problems with trying to edit videos with VirtualDub

    - by Roy Rico
    So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in virtual dub AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

    Read the article

  • Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • Does Exchange 2010 lift the restriction that DL addresses must be in Active Directory?

    - by Justin Grant
    We'd like to enable end-users to be able to create and maintain their own email distribution lists in Exchange 2010, where those lists may include users inside the company but also customers, partners, etc. who are outside the company. One of the limitations in Exchange 2007 (see this question) was that any member of a DL had to have an entry in active directory. You couldn't just take a group of email addresses (both inside and outside my company) and create an Exchange DL with those addresses without involving Active Directory admins to create entries for each external user. For a company creating hundreds of small mailing lists every month, this was an unacceptable IT expense. So we had to use a separate mailing list solution (GNU mailman) for DLs which included external users. Is this limitation relaxed in Exchange 2010 so we can throw away GNU mailman and use Exchange instead?

    Read the article

  • Windows 7 taskbar groups to use vertical menus only, not thumbnails?

    - by Justin Grant
    I frequently have 10 or more windows of the same application (e.g. Outlook, Word, IE, etc.) open at one time. Windows 7's new taskbar grouping thumbnail feature shows a preview of open windows (aka thumbnails) when you single-click on the taskbar group for that application. But when I have over 10 windows open (more thumbnails than will fit horizontally on my screen), Windows reverts to a vertical menu. This is disconcerting since I need to train myself to deal with two separate behaviors and can never anticipate what I'm going to see when I click on a taskbar group. Furthermore, I find the thumbnails more difficult to visually scan through (vs. the vertical menu) because only 1-2 words of each window's title are shown. Typically that's not enough text to disambiguate and help me find the right window. I'd like to force Windows 7's taskbar grouping to always show a vertical menu (like in XP) instead of sometimes showing thumbnail previews and sometimes showing a vertical menu. Anyone know how (whether?) this can be done? UPDATE: BTW, I'm running the RTM version (build 7600) of Windows 7. There are apparently other solutions out there which work on earlier builds, but which don't work on the RTM build.

    Read the article

  • Specific IP routing for VPN

    - by Roy
    Is there a way that I can prevent an entire subnet from using internal routing. The VPN server is supposed to be a way to access the company's intranet websites for some people, while for others it is supposed to do routing to the outside only and therefore not having access to any internal websites. The VPN server has a DNS on the actual server but not all should be using this DNS. Some of the users should be directly sent out of the server to the internet. Example: 10.0.0.1 is the DNS on the server, gateway for the VPN 10.0.0.2 is a user (A) on the VPN having access to the intranet websites (subnet is 10.0.0.0/25) 10.0.0.192 is a user (B) only needing routing and no access to intranet websites (subnet is 10.0.0.192/26) All traffic of user B should be directly rerouted out of the server. I have tried several iptables but without success.

    Read the article

  • Ubuntu + latest samba version, symlinks no longer work on share mounted in windows

    - by Roy Rico
    I just apt-getted (apt-got?) the latest software for my Ubuntu 9.10 linux box, and I noticed that samba was the included in the update. After the install, the symlinks in my home directory no longer work when mounted as a drive in my linux box. They worked literally seconds before I did the update. All my normal directories work just fine. Viewing the directory listing on the command line, all the files, dirs & links have the exact same permissions, yet this is the error I get: Location is not available L:\LinkDir is not accessible. Access is denied. I looked on the forums, and i saw this option for the smb.conf follow symlinks = yes wide symlinks = yes unix extensions = no I put those in, but they had no effect. Has anyone had this problem yet?

    Read the article

  • How to know the full path of a file using SSH?

    - by Roy
    Hi I am beginner for SSH stuff but i want to dump a big sql file and for that i need to be able to navigate to the appropriate path in my hosting account. I managed to login to SSH and i typed pwdbut it gave me a shared hosting pathway like /home/content/r/o/s/roshanjonah How Can i go to the path where i upload my files to...i use FTP but in FTP path it just shows / so i cannot go any further back than that...so using SSH how can i come to this path in ftp... Thanks Roshan

    Read the article

  • How can I use cp to copy a directory but ignore a certain sub directory in Linux

    - by P Roy
    Due to a Hard disk problem I am trying to shift a partition from one hard disk to another. I am following http://www.ibm.com/developerworks/library/l-partplan.html article to do that. In the copying part I would like to ignore one particular sub directory. How can I accomplish that keeping in mind when copying I have to preserve my owner group and time stamp. There is around 700 GB of data that needs to be copied if I do not ignore a particular subdirectory.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >