Search Results

Search found 1784 results on 72 pages for 'in depth'.

Page 15/72 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• Data Quality and Master Data Management Resources

  - by Dejan Sarka

  Many companies or organizations do regular data cleansing. When you cleanse the data, the data quality goes up to some higher level. The data quality level is determined by the amount of work invested in the cleansing. As time passes, the data quality deteriorates, and you need to repeat the cleansing process. If you spend an equal amount of effort as you did with the previous cleansing, you can expect the same level of data quality as you had after the previous cleansing. And then the data quality deteriorates over time again, and the cleansing process starts over and over again. The idea of Data Quality Services is to mitigate the cleansing process. While the amount of time you need to spend on cleansing decreases, you will achieve higher and higher levels of data quality. While cleansing, you learn what types of errors to expect, discover error patterns, find domains of correct values, etc. You don’t throw away this knowledge. You store it and use it to find and correct the same issues automatically during your next cleansing process. The following figure shows this graphically. The idea of master data management, which you can perform with Master Data Services (MDS), is to prevent data quality from deteriorating. Once you reach a particular quality level, the MDS application—together with the defined policies, people, and master data management processes—allow you to maintain this level permanently. This idea is shown in the following picture. OK, now you know what DQS and MDS are about. You can imagine the importance on maintaining the data quality. Here are some resources that help you preparing and executing the data quality (DQ) and master data management (MDM) activities. Books Dejan Sarka and Davide Mauri: Data Quality and Master Data Management with Microsoft SQL Server 2008 R2 – a general introduction to MDM, MDS, and data profiling. Matching explained in depth. Dejan Sarka, Matija Lah and Grega Jerkic: MCTS Self-Paced Training Kit (Exam 70-463): Building Data Warehouses with Microsoft SQL Server 2012 – I wrote quite a few chapters about DQ and MDM, and introduced also SQL Server 2012 DQS. Thomas Redman: Data Quality: The Field Guide – you should start with this book. Thomas Redman is the father of DQ and MDM. Tyler Graham: Microsoft SQL Server 2012 Master Data Services – MDS in depth from a product team mate. Arkady Maydanchik: Data Quality Assessment – data profiling in depth. Tamraparni Dasu, Theodore Johnson: Exploratory Data Mining and Data Cleaning – advanced data profiling with data mining. Forthcoming presentations I am presenting a DQS and MDM seminar at PASS SQL Rally Amsterdam 2013: Wednesday, November 6th, 2013: Enterprise Information Management with SQL Server 2012 – a good kick start to your first DQ and / or MDM project. Courses Data Quality and Master Data Management with SQL Server 2012 – I wrote a 2-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. Start improving the quality of your data now!

  Read the article

• Ambient occlusion shader just shows models as all white

  - by dvds414

  Okay so I have this shader for ambient occlusion. It loads to world correctly, but it just shows all the models as being white. I do not know why. I am just running the shader while the model is rendering, is that correct? or do I need to make a render target or something? If so then how? I'm using C++. Here is my shader: float sampleRadius; float distanceScale; float4x4 xProjection; float4x4 xView; float4x4 xWorld; float3 cornerFustrum; struct VS_OUTPUT { float4 pos : POSITION; float2 TexCoord : TEXCOORD0; float3 viewDirection : TEXCOORD1; }; VS_OUTPUT VertexShaderFunction( float4 Position : POSITION, float2 TexCoord : TEXCOORD0) { VS_OUTPUT Out = (VS_OUTPUT)0; float4 WorldPosition = mul(Position, xWorld); float4 ViewPosition = mul(WorldPosition, xView); Out.pos = mul(ViewPosition, xProjection); Position.xy = sign(Position.xy); Out.TexCoord = (float2(Position.x, -Position.y) + float2( 1.0f, 1.0f ) ) * 0.5f; float3 corner = float3(-cornerFustrum.x * Position.x, cornerFustrum.y * Position.y, cornerFustrum.z); Out.viewDirection = corner; return Out; } texture depthTexture; texture randomTexture; sampler2D depthSampler = sampler_state { Texture = <depthTexture>; ADDRESSU = CLAMP; ADDRESSV = CLAMP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; sampler2D RandNormal = sampler_state { Texture = <randomTexture>; ADDRESSU = WRAP; ADDRESSV = WRAP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; float4 PixelShaderFunction(VS_OUTPUT IN) : COLOR0 { float4 samples[16] = { float4(0.355512, -0.709318, -0.102371, 0.0 ), float4(0.534186, 0.71511, -0.115167, 0.0 ), float4(-0.87866, 0.157139, -0.115167, 0.0 ), float4(0.140679, -0.475516, -0.0639818, 0.0 ), float4(-0.0796121, 0.158842, -0.677075, 0.0 ), float4(-0.0759516, -0.101676, -0.483625, 0.0 ), float4(0.12493, -0.0223423, -0.483625, 0.0 ), float4(-0.0720074, 0.243395, -0.967251, 0.0 ), float4(-0.207641, 0.414286, 0.187755, 0.0 ), float4(-0.277332, -0.371262, 0.187755, 0.0 ), float4(0.63864, -0.114214, 0.262857, 0.0 ), float4(-0.184051, 0.622119, 0.262857, 0.0 ), float4(0.110007, -0.219486, 0.435574, 0.0 ), float4(0.235085, 0.314707, 0.696918, 0.0 ), float4(-0.290012, 0.0518654, 0.522688, 0.0 ), float4(0.0975089, -0.329594, 0.609803, 0.0 ) }; IN.TexCoord.x += 1.0/1600.0; IN.TexCoord.y += 1.0/1200.0; normalize (IN.viewDirection); float depth = tex2D(depthSampler, IN.TexCoord).a; float3 se = depth * IN.viewDirection; float3 randNormal = tex2D( RandNormal, IN.TexCoord * 200.0 ).rgb; float3 normal = tex2D(depthSampler, IN.TexCoord).rgb; float finalColor = 0.0f; for (int i = 0; i < 16; i++) { float3 ray = reflect(samples[i].xyz,randNormal) * sampleRadius; //if (dot(ray, normal) < 0) // ray += normal * sampleRadius; float4 sample = float4(se + ray, 1.0f); float4 ss = mul(sample, xProjection); float2 sampleTexCoord = 0.5f * ss.xy/ss.w + float2(0.5f, 0.5f); sampleTexCoord.x += 1.0/1600.0; sampleTexCoord.y += 1.0/1200.0; float sampleDepth = tex2D(depthSampler, sampleTexCoord).a; if (sampleDepth == 1.0) { finalColor ++; } else { float occlusion = distanceScale* max(sampleDepth - depth, 0.0f); finalColor += 1.0f / (1.0f + occlusion * occlusion * 0.1); } } return float4(finalColor/16, finalColor/16, finalColor/16, 1.0f); } technique SSAO { pass P0 { VertexShader = compile vs_3_0 VertexShaderFunction(); PixelShader = compile ps_3_0 PixelShaderFunction(); } }

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 22 (sys.dm_db_index_physical_stats)

  - by Tamarick Hill

  The sys.dm_db_index_physical_stats Dynamic Management Function is used to return information about the fragmentation levels, page counts, depth, number of levels, record counts, etc. about the indexes on your database instance. One row is returned for each level in a given index, which we will discuss more later. The function takes a total of 5 input parameters which are (1) database_id, (2) object_id, (3) index_id, (4) partition_number, and (5) the mode of the scan level that you would like to run. Let’s use this function with our AdventureWorks2012 database to better illustrate the information it provides. SELECT * FROM sys.dm_db_index_physical_stats(db_id('AdventureWorks2012'), NULL, NULL, NULL, NULL) As you can see from the result set, there is a lot of beneficial information returned from this DMF. The first couple of columns in the result set (database_id, object_id, index_id, partition_number, index_type_desc, alloc_unit_type_desc) are either self-explanatory or have been explained in our previous blog sessions so I will not go into detail about these at this time. The next column in the result set is the index_depth which represents how deep the index goes. For example, If we have a large index that contains 1 root page, 3 intermediate levels, and 1 leaf level, our index depth would be 5. The next column is the index_level which refers to what level (of the depth) a particular row is referring to. Next is probably one of the most beneficial columns in this result set, which is the avg_fragmentation_in_percent. This column shows you how fragmented a particular level of an index may be. Many people use this column within their index maintenance jobs to dynamically determine whether they should do REORG’s or full REBUILD’s of a given index. The fragment count represents the number of fragments in a leaf level while the avg_fragment_size_in_pages represents the number of pages in a fragment. The page_count column tells you how many pages are in a particular index level. From my result set above, you see the the remaining columns all have NULL values. This is because I did not specify a ‘mode’ in my query and as a result it used the ‘LIMITED’ mode by default. The LIMITED mode is meant to be lightweight so it does collect information for every column in the result set. I will re-run my query again using the ‘DETAILED’ mode and you will see we now have results for these rows. SELECT * FROM sys.dm_db_index_physical_stats(db_id('AdventureWorks2012'), NULL, NULL, NULL, ‘DETAILED’)   From the remaining columns, you see we get even more detailed information such as how many records are in a particular index level (record_count). We have a column for ghost_record_count which represents the number of records that have been marked for deletion, but have not physically been removed by the background ghost cleanup process. We later see information on the MIN, MAX, and AVG record size in bytes. The forwarded_record_count column refers to records that have been updated and now no longer fit within the row on the page anymore and thus have to be moved. A forwarded record is left in the original location with a pointer to the new location. The last column in the result set is the compressed_page_count column which tells you how many pages in your index have been compressed. This is a very powerful DMF that returns good information about the current indexes in your system. However, based on the mode you select, it could be a very resource intensive function so be careful with how you use it. For more information on this Dynamic Management Function, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms188917.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at another IO-related wait type. From Book On-Line: Occurs when a task is waiting for I/Os to finish. ASYNC_IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. If by any means your application that’s connected to SQL Server is processing the data very slowly, this type of wait can occur. Several long-running database operations like BACKUP, CREATE DATABASE, ALTER DATABASE or other operations can also create this wait type. Reducing ASYNC_IO_COMPLETION wait: When it is an issue related to IO, one should check for the following things associated to IO subsystem: Look at the programming and see if there is any application code which processes the data slowly (like inefficient loop, etc.). Note that it should be re-written to avoid this  wait type. Proper placing of the files is very important. We should check the file system for proper placement of the files – LDF and MDF on separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is a higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly and so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on the development setup (test environment). As soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very likely to happen that there are no proper indexes on the system and yet there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the following two articles I wrote that talk about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at an IO-related wait types. From Book On-Line: Occurs while waiting for I/O operations to complete. This wait type generally represents non-data page I/Os. Data page I/O completion waits appear as PAGEIOLATCH_* waits. IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. This is a good indication that IO needs to be looked over here. Reducing IO_COMPLETION wait: When it is an issue concerning the IO, one should look at the following things related to IO subsystem: Proper placing of the files is very important. We should check the file system for proper placement of files – LDF and MDF on a separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk),etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as the configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on development (test environment) set up and as soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very possible that there are no proper indexes in the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the two articles that I wrote; they are about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Types, SQL White Papers, T SQL, Technology

  Read the article

• Skewed: a rotating camera in a simple CPU-based voxel raycaster/raytracer

  - by voxelizr

  TL;DR -- in my first simple software voxel raycaster, I cannot get camera rotations to work, seemingly correct matrices notwithstanding. The result is skewed: like a flat rendering, correctly rotated, however distorted and without depth. (While axis-aligned ie. unrotated, depth and parallax are as expected.) I'm trying to write a simple voxel raycaster as a learning exercise. This is purely CPU based for now until I figure out how things work exactly -- fow now, OpenGL is just (ab)used to blit the generated bitmap to the screen as often as possible. Now I have gotten to the point where a perspective-projection camera can move through the world and I can render (mostly, minus some artifacts that need investigation) perspective-correct 3-dimensional views of the "world", which is basically empty but contains a voxel cube of the Stanford Bunny. So I have a camera that I can move up and down, strafe left and right and "walk forward/backward" -- all axis-aligned so far, no camera rotations. Herein lies my problem. Screenshot #1: correct depth when the camera is still strictly axis-aligned, ie. un-rotated. Now I have for a few days been trying to get rotation to work. The basic logic and theory behind matrices and 3D rotations, in theory, is very clear to me. Yet I have only ever achieved a "2.5 rendering" when the camera rotates... fish-eyey, bit like in Google Streetview: even though I have a volumetric world representation, it seems --no matter what I try-- like I would first create a rendering from the "front view", then rotate that flat rendering according to camera rotation. Needless to say, I'm by now aware that rotating rays is not particularly necessary and error-prone. Still, in my most recent setup, with the most simplified raycast ray-position-and-direction algorithm possible, my rotation still produces the same fish-eyey flat-render-rotated style looks: Screenshot #2: camera "rotated to the right by 39 degrees" -- note how the blue-shaded left-hand side of the cube from screen #2 is not visible in this rotation, yet by now "it really should"! Now of course I'm aware of this: in a simple axis-aligned-no-rotation-setup like I had in the beginning, the ray simply traverses in small steps the positive z-direction, diverging to the left or right and top or bottom only depending on pixel position and projection matrix. As I "rotate the camera to the right or left" -- ie I rotate it around the Y-axis -- those very steps should be simply transformed by the proper rotation matrix, right? So for forward-traversal the Z-step gets a bit smaller the more the cam rotates, offset by an "increase" in the X-step. Yet for the pixel-position-based horizontal+vertical-divergence, increasing fractions of the x-step need to be "added" to the z-step. Somehow, none of my many matrices that I experimented with, nor my experiments with matrix-less hardcoded verbose sin/cos calculations really get this part right. Here's my basic per-ray pre-traversal algorithm -- syntax in Go, but take it as pseudocode: fx and fy: pixel positions x and y rayPos: vec3 for the ray starting position in world-space (calculated as below) rayDir: vec3 for the xyz-steps to be added to rayPos in each step during ray traversal rayStep: a temporary vec3 camPos: vec3 for the camera position in world space camRad: vec3 for camera rotation in radians pmat: typical perspective projection matrix The algorithm / pseudocode: // 1: rayPos is for now "this pixel, as a vector on the view plane in 3d, at The Origin" rayPos.X, rayPos.Y, rayPos.Z = ((fx / width) - 0.5), ((fy / height) - 0.5), 0 // 2: rotate around Y axis depending on cam rotation. No prob since view plane still at Origin 0,0,0 rayPos.MultMat(num.NewDmat4RotationY(camRad.Y)) // 3: a temp vec3. planeDist is -0.15 or some such -- fov-based dist of view plane from eye and also the non-normalized, "in axis-aligned world" traversal step size "forward into the screen" rayStep.X, rayStep.Y, rayStep.Z = 0, 0, planeDist // 4: rotate this too -- 0,zstep should become some meaningful xzstep,xzstep rayStep.MultMat(num.NewDmat4RotationY(CamRad.Y)) // set up direction vector from still-origin-based-ray-position-off-rotated-view-plane plus rotated-zstep-vector rayDir.X, rayDir.Y, rayDir.Z = -rayPos.X - me.rayStep.X, -rayPos.Y, rayPos.Z + rayStep.Z // perspective projection rayDir.Normalize() rayDir.MultMat(pmat) // before traversal, the ray starting position has to be transformed from origin-relative to campos-relative rayPos.Add(camPos) I'm skipping the traversal and sampling parts -- as per screens #1 through #3, those are "basically mostly correct" (though not pretty) -- when axis-aligned / unrotated.

  Read the article

• How to translate along Z axis in OpenTK

  - by JeremyJAlpha

  I am playing around with an OpenGL sample application I downloaded for Xamarin-Android. The sample application produces a rotating colored cube I would simply like to edit it so that the rotating cube is translated along the Z axis and disappears into the distance. I modified the code by: adding an cumulative variable to store my Z distance, adding GL.Enable(All.DepthBufferBit) - unsure if I put it in the right place, adding GL.Translate(0.0f, 0.0f, Depth) - before the rotate functions, Result: cube rotates a couple of times then disappears, it seems to be getting clipped out of the frustum. So my question is what is the correct way to use and initialize the Z buffer and get the cube to travel along the Z axis? I am sure I am missing some function calls but am unsure of what they are and where to put them. I apologise in advance as this is very basic stuff but am still learning :P, I would appreciate it if anyone could show me the best way to get the cube to still rotate but to also move along the Z axis. I have commented all my modifications in the code: // This gets called when the drawing surface is ready protected override void OnLoad (EventArgs e) { // this call is optional, and meant to raise delegates // in case any are registered base.OnLoad (e); // UpdateFrame and RenderFrame are called // by the render loop. This is takes effect // when we use 'Run ()', like below UpdateFrame += delegate (object sender, FrameEventArgs args) { // Rotate at a constant speed for (int i = 0; i < 3; i ++) rot [i] += (float) (rateOfRotationPS [i] * args.Time); }; RenderFrame += delegate { RenderCube (); }; GL.Enable(All.DepthBufferBit); //Added by Noob GL.Enable(All.CullFace); GL.ShadeModel(All.Smooth); GL.Hint(All.PerspectiveCorrectionHint, All.Nicest); // Run the render loop Run (30); } void RenderCube () { GL.Viewport(0, 0, viewportWidth, viewportHeight); GL.MatrixMode (All.Projection); GL.LoadIdentity (); if ( viewportWidth > viewportHeight ) { GL.Ortho(-1.5f, 1.5f, 1.0f, -1.0f, -1.0f, 1.0f); } else { GL.Ortho(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f); } GL.MatrixMode (All.Modelview); GL.LoadIdentity (); Depth -= 0.02f; //Added by Noob GL.Translate(0.0f,0.0f,Depth); //Added by Noob GL.Rotate (rot[0], 1.0f, 0.0f, 0.0f); GL.Rotate (rot[1], 0.0f, 1.0f, 0.0f); GL.Rotate (rot[2], 0.0f, 1.0f, 0.0f); GL.ClearColor (0, 0, 0, 1.0f); GL.Clear (ClearBufferMask.ColorBufferBit); GL.VertexPointer(3, All.Float, 0, cube); GL.EnableClientState (All.VertexArray); GL.ColorPointer (4, All.Float, 0, cubeColors); GL.EnableClientState (All.ColorArray); GL.DrawElements(All.Triangles, 36, All.UnsignedByte, triangles); SwapBuffers (); }

  Read the article

• Texture displays on Android emulator but not on device

  - by Rob

  I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

  Read the article

• HLSL Shader not working right?

  - by dvds414

  Okay so I have this shader for ambient occlusion. It loads to world correctly, but it just shows all the models as being white. I do not know why. I am just running the shader while the model is rendering, is that correct? or do I need to make a render target or something? if so then how? I'm using C++. Here is my shader. float sampleRadius; float distanceScale; float4x4 xProjection; float4x4 xView; float4x4 xWorld; float3 cornerFustrum; struct VS_OUTPUT { float4 pos : POSITION; float2 TexCoord : TEXCOORD0; float3 viewDirection : TEXCOORD1; }; VS_OUTPUT VertexShaderFunction( float4 Position : POSITION, float2 TexCoord : TEXCOORD0) { VS_OUTPUT Out = (VS_OUTPUT)0; float4 WorldPosition = mul(Position, xWorld); float4 ViewPosition = mul(WorldPosition, xView); Out.pos = mul(ViewPosition, xProjection); Position.xy = sign(Position.xy); Out.TexCoord = (float2(Position.x, -Position.y) + float2( 1.0f, 1.0f ) ) * 0.5f; float3 corner = float3(-cornerFustrum.x * Position.x, cornerFustrum.y * Position.y, cornerFustrum.z); Out.viewDirection = corner; return Out; } texture depthTexture; texture randomTexture; sampler2D depthSampler = sampler_state { Texture = <depthTexture>; ADDRESSU = CLAMP; ADDRESSV = CLAMP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; sampler2D RandNormal = sampler_state { Texture = <randomTexture>; ADDRESSU = WRAP; ADDRESSV = WRAP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; float4 PixelShaderFunction(VS_OUTPUT IN) : COLOR0 { float4 samples[16] = { float4(0.355512, -0.709318, -0.102371, 0.0 ), float4(0.534186, 0.71511, -0.115167, 0.0 ), float4(-0.87866, 0.157139, -0.115167, 0.0 ), float4(0.140679, -0.475516, -0.0639818, 0.0 ), float4(-0.0796121, 0.158842, -0.677075, 0.0 ), float4(-0.0759516, -0.101676, -0.483625, 0.0 ), float4(0.12493, -0.0223423, -0.483625, 0.0 ), float4(-0.0720074, 0.243395, -0.967251, 0.0 ), float4(-0.207641, 0.414286, 0.187755, 0.0 ), float4(-0.277332, -0.371262, 0.187755, 0.0 ), float4(0.63864, -0.114214, 0.262857, 0.0 ), float4(-0.184051, 0.622119, 0.262857, 0.0 ), float4(0.110007, -0.219486, 0.435574, 0.0 ), float4(0.235085, 0.314707, 0.696918, 0.0 ), float4(-0.290012, 0.0518654, 0.522688, 0.0 ), float4(0.0975089, -0.329594, 0.609803, 0.0 ) }; IN.TexCoord.x += 1.0/1600.0; IN.TexCoord.y += 1.0/1200.0; normalize (IN.viewDirection); float depth = tex2D(depthSampler, IN.TexCoord).a; float3 se = depth * IN.viewDirection; float3 randNormal = tex2D( RandNormal, IN.TexCoord * 200.0 ).rgb; float3 normal = tex2D(depthSampler, IN.TexCoord).rgb; float finalColor = 0.0f; for (int i = 0; i < 16; i++) { float3 ray = reflect(samples[i].xyz,randNormal) * sampleRadius; //if (dot(ray, normal) < 0) // ray += normal * sampleRadius; float4 sample = float4(se + ray, 1.0f); float4 ss = mul(sample, xProjection); float2 sampleTexCoord = 0.5f * ss.xy/ss.w + float2(0.5f, 0.5f); sampleTexCoord.x += 1.0/1600.0; sampleTexCoord.y += 1.0/1200.0; float sampleDepth = tex2D(depthSampler, sampleTexCoord).a; if (sampleDepth == 1.0) { finalColor ++; } else { float occlusion = distanceScale* max(sampleDepth - depth, 0.0f); finalColor += 1.0f / (1.0f + occlusion * occlusion * 0.1); } } return float4(finalColor/16, finalColor/16, finalColor/16, 1.0f); } technique SSAO { pass P0 { VertexShader = compile vs_3_0 VertexShaderFunction(); PixelShader = compile ps_3_0 PixelShaderFunction(); } }

  Read the article

• Memory leak with NSData

  - by Kamchatka

  I'm having a leak with this code without being able to find where it's coming from. This function get called within an autorelease pool. I release the IplImage* image argument. When I run the ObjAlloc tool, it tells me that "NSData* data" is leaking. If I try to manually release the UIImage returned by this function, I get an EXC_BAD_ACCESS error, probably because this UIImage is autoreleased. I'm a bit confused, any hint would be appreciated. Thanks! UIImage *UIImageFromIplImage(IplImage *image) { NSLog(@"IplImage (%d, %d) %d bits by %d channels, %d bytes/row %s", image->width, image->height, image->depth, image->nChannels, image->widthStep, image->channelSeq); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); NSData *data = [NSData dataWithBytes:image->imageData length:image->imageSize]; CGDataProviderRef provider = CGDataProviderCreateWithCFData((CFDataRef)data); CGImageRef imageRef = CGImageCreate(image->width, image->height, image->depth, image->depth * image->nChannels, image->widthStep, colorSpace, kCGImageAlphaNone|kCGBitmapByteOrderDefault, provider, NULL, false, kCGRenderingIntentDefault); UIImage *ret = [UIImage imageWithCGImage:imageRef]; CGImageRelease(imageRef); CGDataProviderRelease(provider); CGColorSpaceRelease(colorSpace); return ret; }

  Read the article

• [SOLVED] How to create a FBO with stencil buffer in OpenGL ES 2.0?

  - by Alphones

  I need stencil buffer on 3GS to render planar shadow, and polygon offset won't work prefect, still has z-fighting problem. So I use stencil buffer to make the shadow correct, it works on win32 gles2 emulator, but not on iPhone. After I added a post effect to the whole scene. The stencil buffer won't work even on win32 gles2 emulator. And I tried to attach a stencil buffer to FBO, buf the screen turns to black. Here's my code, glGenRenderbuffers(1, &dbo); // depth buffer glBindRenderbuffer(GL_RENDERBUFFER, dbo); glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT24_OES, widthGL, heightGL); glGenRenderbuffers(1, &sbo); // stencil buffer glBindRenderbuffer(GL_RENDERBUFFER, sbo); glRenderbufferStorage(GL_RENDERBUFFER, GL_STENCIL_INDEX8, widthGL, heightGL); glGenFramebuffers(1, &fbo); glBindFramebuffer(GL_FRAMEBUFFER, fbo); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, tex, 0); glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, dbo); glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, sbo); // this make the whole screen black. The eglContext is created with STENCIL_SIZE=8, it works without a RTT. I tried to change the RenderbufferStorage for both depth buffer and stencil buffer, but none of them works. Is there anything I have missed? Does the stencil buffer pack with depth buffer? (I cannot find things like GL_DEPTH24_STENCIL8 ...)

  Read the article

• Source of parsers for programming languages?

  - by Arkaaito

  I'm dusting off an old project of mine which calculates a number of simple metrics about large software projects. One of the metrics is the length of files/classes/methods. Currently my code "guesses" where class/method boundaries are based on a very crude algorithm (traverse the file, maintaining a "current depth" and adjusting it whenever you encounter unquoted brackets; when you return to the level a class or method began on, consider it exited). However, there are many problems with this procedure, and a "simple" way of detecting when your depth has changed is not always effective. To make this give accurate results, I need to use the canonical way (in each language) of detecting function definitions, class definitions and depth changes. This amounts to writing a simple parser to generate parse trees containing at least these elements for every language I want my project to be applicable to. Obviously parsers have been written for all these languages before, so it seems like I shouldn't have to duplicate that effort (even though writing parsers is fun). Is there some open-source project which collects ready-to-use parser libraries for a bunch of source languages? Or should I just be using ANTLR to make my own from scratch? (Note: I'd be delighted to port the project to another language to make use of a great existing resource, so if you know of one, it doesn't matter what language it's written in.)

  Read the article

• Asp.Net tree view in SharePoint webpart- Input string error

  - by Faiz

  Hi All, I am facing a very strange issue. I have a SharePoint webpart that displays an asp.net tree view. It takes tree depth from a drop down. To improve performance of the tree view, i am setting the PopulateOnDemand property to true for the last level of the tree depth. For example, if i have a total of 10 levels in the data and the user selects tree depth as 3, then the third level data i set PopulateOnDemand to true. Now comes the strange part. When i click on the + image on the third level, and if there are children under that particular node then call back happens and node gets expanded. But if there no children for that particular node, then click + throws "Input string was not in the correct format" error. I have made sure that there is no server side error. Some things looks to be fishy when internet explorer is trying to bind construct the expanded node. Please let me know if any one faced similar issue or the resolution for the same? Thanks in advance

  Read the article

• Abstracting boxed array structures in J

  - by estanford

  I've been working on a J function for a while, that's supposed to scan a list and put consecutive copies of an element into separate, concatenated boxes. My efforts have taken me as far as the function (<;. 2) ((2&(~:/\)),1:) which tests successive list entries for inequality, returns a list of boolean values, and cuts the list into boxes that end each time the number 1 appears. Here's an example application: (<;. 2) ((2&(~:/\)),1:) 1 2 3 3 3 4 1 1 1 +-+-+-----+-+-----+ |1|1|0 0 1|1|0 0 1| +-+-+-----+-+-----+ The task would be finished if I could then replace all those booleans with their corresponding values in the input argument. I've been looking for some kind of mystery function that would let me do something like final =: mysteryfunction @ (<;. 2) ((2&(~:/\)),1:) final 1 2 3 3 3 4 1 1 1 +-+-+-----+-+-----+ |1|2|3 3 3|4|1 1 1| +-+-+-----+-+-----+ In an ideal situation, there would be some way to abstractly represent the nesting pattern generated by (<;. 2) ((2&(~:/\)),1:) to the original input list. (i.e. "This boxed array over here has the first element boxed at depth one, the second element boxed at depth one, the third, fourth, and fifth elements boxed together at depth one,..., so take that unboxed list over there and box it up the same way.") I tried fooling around with ;. , S: , L:, L. and &. to produce that behavior, but I haven't had much luck. Is there some kind of operator or principle I'm missing that could make this happen? It wouldn't surprise me if I were overthinking the whole issue, but I'm running out of ideas.

  Read the article

• Use a vector to index a matrix without linear index

  - by David_G

  G'day, I'm trying to find a way to use a vector of [x,y] points to index from a large matrix in MATLAB. Usually, I would convert the subscript points to the linear index of the matrix.(for eg. Use a vector as an index to a matrix in MATLab) However, the matrix is 4-dimensional, and I want to take all of the elements of the 3rd and 4th dimensions that have the same 1st and 2nd dimension. Let me hopefully demonstrate with an example: Matrix = nan(4,4,2,2); % where the dimensions are (x,y,depth,time) Matrix(1,2,:,:) = 999; % note that this value could change in depth (3rd dim) and time (4th time) Matrix(3,4,:,:) = 888; % note that this value could change in depth (3rd dim) and time (4th time) Matrix(4,4,:,:) = 124; Now, I want to be able to index with the subscripts (1,2) and (3,4), etc and return not only the 999 and 888 which exist in Matrix(:,:,1,1) but the contents which exist at Matrix(:,:,1,2),Matrix(:,:,2,1) and Matrix(:,:,2,2), and so on (IRL, the dimensions of Matrix might be more like size(Matrix) = (300 250 30 200) I don't want to use linear indices because I would like the results to be in a similar vector fashion. For example, I would like a result which is something like: ans(time=1) 999 888 124 999 888 124 ans(time=2) etc etc etc etc etc etc I'd also like to add that due to the size of the matrix I'm dealing with, speed is an issue here - thus why I'd like to use subscript indices to index to the data. I should also mention that (unlike this question: Accessing values using subscripts without using sub2ind) since I want all the information stored in the extra dimensions, 3 and 4, of the i and jth indices, I don't think that a slightly faster version of sub2ind still would not cut it..

  Read the article

• Using map/reduce for mapping the properties in a collection

  - by And

  Update: follow-up to MongoDB Get names of all keys in collection. As pointed out by Kristina, one can use Mongodb 's map/reduce to list the keys in a collection: db.things.insert( { type : ['dog', 'cat'] } ); db.things.insert( { egg : ['cat'] } ); db.things.insert( { type : [] }); db.things.insert( { hello : [] } ); mr = db.runCommand({"mapreduce" : "things", "map" : function() { for (var key in this) { emit(key, null); } }, "reduce" : function(key, stuff) { return null; }}) db[mr.result].distinct("_id") //output: [ "_id", "egg", "hello", "type" ] As long as we want to get only the keys located at the first level of depth, this works fine. However, it will fail retrieving those keys that are located at deeper levels. If we add a new record: db.things.insert({foo: {bar: {baaar: true}}}) And we run again the map-reduce +distinct snippet above, we will get: [ "_id", "egg", "foo", "hello", "type" ] But we will not get the bar and the baaar keys, which are nested down in the data structure. The question is: how do I retrieve all keys, no matter their level of depth? Ideally, I would actually like the script to walk down to all level of depth, producing an output such as: ["_id","egg","foo","foo.bar","foo.bar.baaar","hello","type"] Thank you in advance!

  Read the article

• Simulating 3D 'cards' with just orthographic rendering

  - by meds

  I am rendering textured quads from an orthographic perspective and would like to simulate 'depth' by modifying UVs and the vertex positions of the quads four points (top left, top right, bottom left, bottom right). I've found if I make the top left and bottom right corners y position be the same I don't get a linear 'skew' but rather a warped one where the texture covering the top triangle (which makes up the quad) seems to get squashed while the bottom triangles texture looks normal. I can change UVs, any of the four points on the quad (but only in 2D space, it's orthographic projection anyway so 3D space won't matter much). So basically I'm trying to simulate perspective on a two dimensional quad in orthographic projection, any ideas? Is it even mathematically possible/feasible? ideally what I'd like is a situation where I can set an x/y rotation as well as a virtual z 'position' (which simulates z depth) through a function and see it internally calclate the positions/uvs to create the 3D effect. It seems like this should all be mathematical where a set of 2D transforms can be applied to each corner of the quad to simulate depth, I just don't know how to make it happen. I'd guess it requires trigonometry or something, I'm trying to crunch the math but not making much progress. here's what I mean: Top left is just the card, center is the card with a y rotation of X degrees and right most is a card with an x and y rotation of different degrees.

  Read the article

• How could I create a FBO with stencil buffer in OpenGL ES 2.0?

  - by Alphones

  I need stencil buffer on 3GS to render planar shadow, and polygon offset won't work prefect, still has z-fighting problem. So I use stencil buffer to make the shadow correct, it works on win32 gles2 emulator, but not on iPhone. After I added a post effect to the whole scene. The stencil buffer won't work even on win32 gles2 emulator. And I tried to attach a stencil buffer to FBO, buf the screen turns to black. Here's my code, glGenRenderbuffers(1, &dbo); // depth buffer glBindRenderbuffer(GL_RENDERBUFFER, dbo); glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT24_OES, widthGL, heightGL); glGenRenderbuffers(1, &sbo); // stencil buffer glBindRenderbuffer(GL_RENDERBUFFER, sbo); glRenderbufferStorage(GL_RENDERBUFFER, GL_STENCIL_INDEX8, widthGL, heightGL); glGenFramebuffers(1, &fbo); glBindFramebuffer(GL_FRAMEBUFFER, fbo); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, tex, 0); glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, dbo); glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, sbo); // this make the whole screen black. The eglContext is created with STENCIL_SIZE=8, it works without a RTT. I tried to change the RenderbufferStorage for both depth buffer and stencil buffer, but none of them works. Is there anything I have missed? Does the stencil buffer pack with depth buffer? (I cannot find things like GL_DEPTH24_STENCIL8 ...)

  Read the article

• Mysterious Flickering Visual Artifact

  - by Axis

  A flashing bar of red appears at the top of the EAGLView that I have added as a subview in my iPhone app. It flickers on and off (i.e., one frame it's there, the next frame it's not, the next frame it's there again). I have removed a lot of code from my app until I'm essentially left with the stock OpenGL-ES project and a few changes: The glview is not fullscreen; it's a subview. I enabled the depth buffer. I'm not even trying to draw anything. If the glview is fullscreen, or if I disable the depth buffer, then there is no flicker and it works fine. But needless to say, this is a 3D view and I'd like to be able to display it within a larger UIKit view. I'm not sure what code would be useful to post, but here's how I add the glview to my main view: appDelegate.glView.frame = CGRectMake(245, 65, 215, 215); [self.view addSubview:appDelegate.glView]; [appDelegate.glView startAnimation]; Here's my render function: - (void) render { [EAGLContext setCurrentContext:context]; glBindFramebufferOES(GL_FRAMEBUFFER_OES, defaultFramebuffer); glViewport(0, 0, backingWidth, backingHeight); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glBindRenderbufferOES(GL_RENDERBUFFER_OES, colorRenderbuffer); [context presentRenderbuffer:GL_RENDERBUFFER_OES]; } It seems pretty obvious to me that the problem lies with the depth buffer somehow, but I'm not sure why. Also, it works fine in the simulator, but not on my iphone. I'm using iPhone OS 3.1. Any ideas on where to look for a problem?

  Read the article

• PNG composition using GD and PHP

  - by Dominic

  I am trying to take a rectangular png and add depth using GD by duplicating the background and moving it down 1 pixel and right 1 pixel. I am trying to preserve a transparent background as well. I am having a bunch of trouble with preserving the transparency. Any help would be greatly appreciated. Thanks! $obj = imagecreatefrompng('rectangle.png'); $depth = 5; $obj_width = imagesx($obj); $obj_height = imagesy($obj); imagesavealpha($obj, true); for($i=1;$i<=$depth;$i++){ $layer = imagecreatefrompng('rectangle.png'); imagealphablending( $layer, false ); imagesavealpha($layer, true); $new_obj = imagecreatetruecolor($obj_width+$i,$obj_height+$i); $new_obj_width = imagesx($new_obj); $new_obj_height = imagesy($new_obj); imagealphablending( $new_obj, false ); imagesavealpha($new_obj, true); $trans_color = imagecolorallocatealpha($new_obj, 0, 0, 0, 127); imagefill($new_obj, 0, 0, $trans_color); imagecopyresampled($new_obj, $layer, $i, $i, 0, 0, $obj_width, $obj_height, $obj_width, $obj_height); //imagesavealpha($new_obj, true); //imagesavealpha($obj, true); } header ("Content-type: image/png"); imagepng($new_obj); imagedestroy($new_obj);

  Read the article

• Trouble with go tour crawler exercise

  - by David Mason

  I'm going through the go tour and I feel like I have a pretty good understanding of the language except for concurrency. On slide 71 there is an exercise that asks the reader to parallelize a web crawler (and to make it not cover repeats but I haven't gotten there yet.) Here is what I have so far: func Crawl(url string, depth int, fetcher Fetcher, ch chan string) { if depth <= 0 { return } body, urls, err := fetcher.Fetch(url) if err != nil { ch <- fmt.Sprintln(err) return } ch <- fmt.Sprintf("found: %s %q\n", url, body) for _, u := range urls { go Crawl(u, depth-1, fetcher, ch) } } func main() { ch := make(chan string, 100) go Crawl("http://golang.org/", 4, fetcher, ch) for i := range ch { fmt.Println(i) } } The issue I have is where to put the close(ch) call. If I put a defer close(ch) somewhere in the Crawl method, then I end up writing to a closed channel in one of the spawned goroutines, since the method will finish execution before the spawned goroutines do. If I omit the call to close(ch), as is shown in my example code, the program deadlocks after all the goroutines finish executing but the main thread is still waiting on the channel in the for loop since the channel was never closed.

  Read the article

• Optimizing C++ Tree Generation

  - by cam

  Hi, I'm generating a Tic-Tac-Toe game tree (9 seconds after the first move), and I'm told it should take only a few milliseconds. So I'm trying to optimize it, I ran it through CodeAnalyst and these are the top 5 calls being made (I used bitsets to represent the Tic-Tac-Toe board): std::_Iterator_base::_Orphan_me std::bitset<9::test std::_Iterator_base::_Adopt std::bitset<9::reference::operator bool std::_Iterator_base::~_Iterator_base void BuildTreeToDepth(Node &nNode, const int& nextPlayer, int depth) { if (depth > 0) { //Calculate gameboard states int evalBoard = nNode.m_board.CalculateBoardState(); bool isFinished = nNode.m_board.isFinished(); if (isFinished || (nNode.m_board.isWinner() > 0)) { nNode.m_winCount = evalBoard; } else { Ticboard tBoard = nNode.m_board; do { int validMove = tBoard.FirstValidMove(); if (validMove != -1) { Node f; Ticboard tempBoard = nNode.m_board; tempBoard.Move(validMove, nextPlayer); tBoard.Move(validMove, nextPlayer); f.m_board = tempBoard; f.m_winCount = 0; f.m_Move = validMove; int currPlay = (nextPlayer == 1 ? 2 : 1); BuildTreeToDepth(f,currPlay, depth - 1); nNode.m_winCount += f.m_board.CalculateBoardState(); nNode.m_branches.push_back(f); } else { break; } }while(true); } } } Where should I be looking to optimize it? How should I optimize these 5 calls (I don't recognize them=.

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• git problems installing stuff [closed]

  - by dale

  root@Frenzen:~# cd root@Frenzen:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ root@Frenzen:~# cd root@Frenzen:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ root@Frenzen:~# git clone git://source.ffmpeg.org/ffmpeg.git ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ cd root@Frenzen:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:43:55-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80... root@Frenzen:~# cd root@Frenzen:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:44:17-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80...

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >