Search Results

Search found 11903 results on 477 pages for 'ip forwarding'.

Page 15/477 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• HOw to give static ip to router from window XP LAN

  - by Captain Planet

  I have the USB modem internet connection. I am using ICS sharing in XP to share my internet connection. ON window XP LAN i have set up the LAN IP as 192.168.137.1 255.255.255.0 Now i have joined the cable from that XP LAN to another LAPTOP running vista Now if set the LAN on VISTA to get ip automatically them internet don't work but if manually set the ip to 192.168.137.3 255.255.255.0 gateway 192.168.137.1 Then my internet works But i want to join that LAN cable from XP to rouer so that i can use router to divide internet. But i don't know how i can give static ipto router because i think somehow that LAN on XP is not giving the IP address

  Read the article

• Selecting which IP address to use for outgoing requests from behind a NAT

  - by iamrohitbanga

  Our organization has several external IP addresses. I am behind 2 layers of NAT and the servers choose which IP address to route my traffic to. Can I specify which IP address to use when finally leaving the organizations network. I know that source routing can be done in IPv4 by adding some options in the header. But can I configure my PC to add these options automatically. I have both a Windows and a Linux Machine.

  Read the article

• Get IP network range after reverse DNS?

  - by Max

  For analytics purposes, I'm looking at large sets of IP addresses in server log files. I'm trying to perform reverse-DNS lookups to understand where traffic is coming from - e.g. what percentage of IPs resolve to corporations, schools, government, international etc. Despite a bunch of optimizations, individually reverse-DNS'ing every IP address still appears to be fairly expensive though. So - is there any way to obtain an entire range of IPs from a reverse-DNS? If yes, this could greatly reduce the number of actual reverse-DNS lookups. Example (numbers slightly obfuscated): Log file contains a request from an IP 128.151.162.17 Reverse DNS resolves to 11.142.152.128.in-addr.arpa 21599 IN PTR alamo.ceas.rochester.edu (So this is a visitor from Rochester University, rochester.edu) Now, would it be safe to assume that all at least all IPs from 128.151.162.* will also resolve to rochester.edu? What about 128.151.*.*? Is there a way to get the exact IP range?

  Read the article

• Ip doesn't change when switching networks, although automatic ip is set. Cause of the issue known

  - by Julio Acevedo

  I have two routers at my house. Both of them have DCHP server enabled. One of them is 192.168.1.1 and gives adresses from 192.168.1.2 to 192.168.1.32 The other one is 192.168.1.50 and gives adresses from 192.168.1.51 to 192.168.1.99 The problem is that I only have internet access in one because my ip is 192.168.1.7, and when I switch to the other one, the ip remains 192.168.1.7, even though I have automatically get a ip adress in Ipv4. When I manually change my ip to one in the range allowed by the router, I can browse the internet. Any ideas how to solve this? Thank you.

  Read the article

• Changing default openVPN IP in linux server

  - by Lamboo

  The problem is that we have a public OpenVPN service. Pay €9.95 and you get an OpenVPN account at currently half a dozen of servers for a month. This means there are always and will always be some people who create a certain amount of abuse or trouble. On the long run, the external IP every OpenVPN user gets assigned is prohibited from editing Wikipedia, it might be banned by e-gold and on some popular webforums, one-click-hosters, etc. Not a pleasant experience for the 97% of our customers who use our service responsibly and legitimately to regain their privacy. So even if I could change the assigned external IP every few months; e. g. from 216.xx.xx.164 to 216.xx.xx.170, it would help us a lot to combat this abuse and to provide our paying clients with "fresh" IP addresses that aren't banned or restricted on some popular Internet sites and services, yet. Does anybody know how to change the first IP address assigned to the public interface in CentOS? So that e.g. OpenVPN in future doesn't give our OpenVPN clients the external IP 123.xx.xx.164 but rather 123.xx.xx.170?

  Read the article

• How to get city name based on IP address in java?

  - by Abhishek

  Is it possible to know the city name based on IP address in java?

  Read the article

• hosts.deny not blocking ip addresses

  - by Jamie

  I have the following in my /etc/hosts.deny file # # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! ALL:ALL and this in /etc/hosts.allow # # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # ALL:xx.xx.xx.xx , xx.xx.xxx.xx , xx.xx.xxx.xxx , xx.x.xxx.xxx , xx.xxx.xxx.xxx but i am still getting lots of these emails: Time: Thu Feb 10 13:39:55 2011 +0000 IP: 202.119.208.220 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Feb 10 13:39:52 ds-103 sshd[12566]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12567]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12568]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12571]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:53 ds-103 sshd[12575]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root whats worse is csf is trying to auto block these ip's when the attempt to get in but although it does put ip's in the csf.deny file they do not get blocked either So i am trying to block all ip's with /etc/hosts.deny and allow only the ip's i use with /etc/hosts.allow but so far it doesn't seem to work. right now i'm having to manually block each one with iptables, I would rather it automatically block the hackers in case I was away from a pc or asleep

  Read the article

• IP Address Alias

  - by DanSpd

  Hello, I have a computer behind router with IP 192.168.0.166. I would like to know if it possible to mask real WAN IP to it. So in the end it would be visible as WAN IP but actually not.

  Read the article

• NAT vs public IP (and blocked ports)

  - by user1646166

  I have a problem with my ISP. They say that they don't block any ports and I have public IP, while I think these both statements are false. Before I talk to them again (which is really tough when my understanding of these terms is different than theirs) I would like to make some things clear. It seems like my computer is behind NAT (is it possible to have public IP and be behind NAT at the same moment?). When I check my IP, through some external server, and type that IP into browser I get a home page of some router (not mine). Isn't that a proof that my IP isn't public? Also, I have problems with making connections via some ports. E.g. when I'm trying to connect through some high port ( 1023) via SSH, it doesn't work. Is it possible that certain range of outgoing ports from my computer are blocked? Or is it simply because that my ssh client (PuTTY) can't receive incoming packets because of blocked incoming ports? To avoid some questions: it's not a problem with my router, I tried connecting my PC directly and it also didn't work, while having connected by 3G using phone with USB tethering, it does work. Thanks!

  Read the article

• How to forward UDP and TCP traffic from one IP to another

  - by Rishabh Agnihotri

  Well i have a server with two LAN Card Installed.I have a server in U.S and one in India.I have created a GRE tunnel to route all traffic from U.S Server to my Indian Server.My Traffic has UDP,TCP,HTTP,etc Traffic.Now i have two LAN Card on my Indian Server.Well i have configured two IPs on the system for some of my needs on the system.One is a /30 and another is a /24.Well now i want the /30 IP to talk to my /24 IP.Lets take a e.g the IPs are 180.151.130.34 - /30 and 103.243.19.254 -/24 I want to forward all the TCP,UDP,HTTP,etc like traffic coming to 180.151.130.34 to 103.243.19.254.In the sense i want to make them talk to each other in a way if a TCP/UDP Packet comes to 180.151.130.34 it should be forwarded to 103.243.19.254 and then that packet is sent back by 103.243.19.254 to 180.151.130.34.I am not able to configure this part.Can anyone tell me step by step how to do so? Well i forgot to specify i am using Windows Server 2008. Any help would be greatly appreciated.Thanks in advance.

  Read the article

• Apache configuration: choose a site to display according to visitor's IP address

  - by user64294

  Hi all. I would like to set a special configuration in our apache web server. I would like to display sites to the users according their IP addresses. We plan to upgrade our web sites. During the upgrade we'll put a maintenance site: so all the users which will connect to our web sites will get this site. but in order to test the upgrade i need to set apache to let only my IP address to access to asked site. If my IP address is a.b.c.d and if i ask for test_dot_com i want to see it. but all other users, having a different IP address, should get the maintenane site even if they look for test_dot_com. Is there a way to do this? PS: sorry As i'm a new user i can't use more than one link. so test_dot_com = test.com Thank you.

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• Multimaster Keepalived Configuration (Virtual IP with Load Balancing)

  - by Rad Akefirad

  Here are requirements: 1. High Availability 2. Load Balancing First configuration 1. Two linux servers have been configured with one static IP for each: 10.17.243.11, 10.17.243.12 2. Keepalived has been installed and configured with one VRRP instance to provide one virtual IP (10.17.243.10 as VIP, 10.17.243.11 as master and 10.17.243.12 as backup). 3. Everything works fine. The VIP is assigned to the master server (10.17.243.11) as long as it is up and running. As soon as it goes down, the VIP will be assigned to the backup server (10.17.243.12). 4. The problem here is all communication goes to the master server. Second configuration 1. I found active-active configuration for Keepalived which is possible by defining more than one VRRP instance. So that both server have two IPs (real 10.17.243.11 and virtual 10.17.243.10 for server #1 and real 10.17.243.12 and virtual 10.17.243.20 for server #2. 2. Everything works fine. we have two VIPs which are accessible (HA). But all communication coming to each IP still goes to one single machine (either server #1 or #2 depending on the IP). However I found some tricks on the DNS to overcome this limitation. But it's not acceptable in our case. Question: Is there any way to have one virtual IP which is assigned to both servers? By that I mean both servers are handling some part of workload (like the thing we do in web server load balancing)? By using either keepalived or some other tools? Thanks in advance.

  Read the article

• How does geolocation based on IP address work?

  - by Martin

  As all Internet users, I've visited web sites which appear to know in which country and city I'm located. I understand that these web sites typically look up my IP address in a database which maps IP address to country / city which works fairly well. I've also seen companies selling this type of database. How is this database, which maps an IP address to a country / city, created in the first place? Is there a central database somewhere where each ISP registers the link between IP address and country/city? Or does the companies selling geolocation databases contact different ISP's and purchase the mapping information from them? Or is there some organization 'above' ISP's who keeps track of this?

  Read the article

• Public IP shows strange characters and Facebook registers logged-in session to a different location

  - by Stuart Kershaw

  I'm encountering some IP strangeness today and hoping to find an explanation. In short, I'm based in Seattle, WA with my ISP being Comcast. While browsing Facebook's account settings, I noticed that my active session was located to Mount Laurel, NJ. At that point I ran a search in Google for 'my public IP', which returned an interesting result: a string of characters in the following format: 2601:8:b000:xxx:xxxx:xxxx:xxxx:xxxx Normally, a search for my IP returns something like: 67.xxx.xx.xxx A phone call to Comcast got me nowhere, but using Comcast's phone-menu debugging tools, I was able to send a 'refresh signal' to my modem. After that, the search for 'my public IP' yielded the expected result... for about 5 minutes, and then it returned to the new string of characters. Does anyone know of an explanation for this?

  Read the article

• assign auto static ip on ubuntu 10.04

  - by ronakin

  I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

  Read the article

• IP stops working from time to time

  - by Mattias

  Hi, have a problem that I can't seem to find the reason for. We are running a small network with windows clients(XP/Win7) and windows servers(2008 sp2/2008r2). The domaincontroller is working as DC, DNS, DHCP, VPN. We have a Level1 FBR4000 between internet and our internal network. The problem is that from time to time specific IP-adresses stops working, the only way I have gotten the devices to work again is to exclude the specific IP from the DHCP address pool and getting a new IP, then everything works again. It seems as the specific IP is beeing banned/blocked somewhere but I just can't figure out where. Anyone got an idea as to where I should start to look? I could also point out that I just reinstalled all servers due to a officemove and was hoping to get away from this problem but it just showed up again. This last time it was my iPhone that got stuck through the Wi-Fi...

  Read the article

• ESXi Static IP setup with gateway on different subnet

  - by Erik Nelson

  I've got an ESXi server that I'm trying to assign a static IP to. I'm having trouble setting the gateway because (I presume) the gateway is on a different subnet. I've been able to accomplish this task on normal Linux servers by doing the following: route add 172.50.99.254 eth0 route add -net default gw 172.50.99.254 eth0 Now using the GUI config tools for ESXi I've tried setting the following IP: 172.50.5.151 Netmask: 255.255.252.0 Gateway: 172.50.99.254 The gateway does not stick, and when I try to add the gateway manually using esxcfg-route it says it has no route to the gateway IP. How can I get this static IP set correctly? (I don't have any control over the network setup).

  Read the article

• Convert IP Address format from ForeFront Firewall logs with SQL

  - by TrevJen

  I am trying to query IP addresses from Forefront Firewall logs, and I am a little stuck on the IP formatting C0A8E008-FFFF-0000-0000-000000000000 Can anyone give me the MSSQL command to turn this into standard human redable? UPDATE, I now see that I kust need to convert the first 8 charecters from hex to decimal....which I can then convert to IP. the trick is to parse those first charecters from the field with SQL

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• Dynamic DNS on D-Link DWR-112 3G router uses a private IP address

  - by user270151

  I'm using a D-Link DWR-112 3G router to connect to the internet by using Celcom broadband plug-in. How can I do the port forwarding to my server? I already have correctly configured my DynDNS, but every time the DynDNS will not set to public address but local private address with in the range 10.xxx.xxx.xxx. My router address is 192.168.1.1 and server address is 192.168.1.5. Can someone give me some guideline about this issue?

  Read the article

• Discover all websites that point to an IP address

  - by crn

  Our company owns over 60 domains and a few external IP addresses (several domains share an external IP address). How do I discover all the domains that use a particular IP address (e.g. 69.x.x.7) without going through the DNS information on each domain? The particular webserver is running Windows 2003 and IIS6. Thanks, in advance, for your help!

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• Windows Firewall rule based on domain name instead of IP

  - by DennyDotNet

  I'm trying to allow a service to a set of machines via Windows Firewall. I'd like to add my home machine to the firewall but my home machine has a dynamic ip address. I use dyndns so that I have a hostname which I can always connect to. So I'm trying to see if there is a way I can use my hostname instead of an IP. Thanks Update Let me add a little more information, perhaps there are other ways to resolve my issue. The server is a web server hosted by RackSpace. I only want to allow RDP access from my work (static IP, so no problem) and home (dynamic). My home IP doesn't change too often, just often enough to annoy me. So maybe there is a better way to do this... maybe VPN?

  Read the article

• Different Ip adress range from provider

  - by victor

  I have different ip-range on the network, the dhcp is from the bordaband that says it uses different iprange as balancednetwork. however this causes issue as my nas and other computer gets the otner iprange of 84 and some computer gets iprange start at 94.254. i have use netgear switches gs108v2 but still get the issue with different ip adress. would apriciate answer on how i can get all devies on the same ip-range thanks

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >