Search Results

Search found 1177 results on 48 pages for 'jeff yates'.

Page 15/48 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Does DFSR replicate shadow copies?

    - by Jeff Sacksteder
    There a a few questions related to using DFSR and Shadow Copies together, but none that indicates if Shadow Copies replicate or not. Meaning, if I have a a pair of DFS replicas with Shadow Copies on Server-A, can I revert that file to a previous version on Server-B? If so, will that reversion be replicated back to Server-A? I suspect not- that VSS is a local NTFS feature and outside the scope of replication, but I cannot verify that myself at the moment.

    Read the article

  • What is a good program for mixed mode circuit simulation?

    - by Jeff Shattock
    I'm looking for a program that will perform schematic capture and mixed-mode (analog and digital) circuit simulation. If it also did PCB layout and routing, that would be a bonus, but not necessary. I currently use an old version of CircuitMaker/TraxMaker, but its dated, and the simulation engine is a bit lacking. Windows or Linux, doesn't really matter. What is a good program for this purpose?

    Read the article

  • How to setup multiple Apache SSL sites using multiple IP addresses

    - by Jeff
    How do you setup a single Apache2 config to host multiple HTTPS sites each on their own IP address? There will also be multiple HTTP sites on just a single IP address. I do not want to use Server Name Indication (SNI) as described here, and I'm only concerned with the important top-level Apache directives. That is, I just need to know the skeleton of how my config should look. The basic setup looks like this: Hosted on 1.1.1.1:80 (HTTP) - example.com - example.net - example.org Hosted on 2.2.2.2:443 (HTTPS) - secure.com Hosted on 3.3.3.3:443 (HTTPS) - secure.net Hosted on 4.4.4.4:443 (HTTPS) - secure.org And here are the important config directives I have so far, which is the closest I've come to a working iteration, but still no dice. I know I'm close, just need a little push in the right direction. Listen 1.1.1.1:80 Listen 2.2.2.2:443 Listen 3.3.3.3:443 Listen 4.4.4.4:443 NameVirtualHost 1.1.1.1:80 NameVirtualHost 2.2.2.2:443 NameVirtualHost 3.3.3.3:443 NameVirtualHost 4.4.4.4:443 # HTTP VIRTUAL HOSTS: <VirtualHost 1.1.1.1:80> ServerName example.com DocumentRoot /home/foo/example.com </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.net DocumentRoot /home/foo/example.net </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.org DocumentRoot /home/foo/example.org </VirtualHost> # HTTPS VIRTUAL HOSTS: <VirtualHost 2.2.2.2:443> ServerName secure.com DocumentRoot /home/foo/secure.com SSLEngine on SSLCertificateFile /home/foo/ssl/secure.com.crt SSLCertificateKeyFile /home/foo/ssl/secure.com.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 3.3.3.3:443> ServerName secure.net DocumentRoot /home/foo/secure.net SSLEngine on SSLCertificateFile /home/foo/ssl/secure.net.crt SSLCertificateKeyFile /home/foo/ssl/secure.net.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 4.4.4.4:443> ServerName secure.org DocumentRoot /home/foo/secure.org SSLEngine on SSLCertificateFile /home/foo/ssl/secure.org.crt SSLCertificateKeyFile /home/foo/ssl/secure.org.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> For what it's worth, I prefer to have each of my SSL sites on their own IP instead of including one of them on the primary VHOST IP. Any links which show a standard setup would be more than welcome!

    Read the article

  • Silverlight Cream for November 27, 2011 -- #1176

    - by Dave Campbell
    In this Issue: Matt Eland, Parag Joshi, Jerrel Blankenship, and Joost van Schaik. Above the Fold: WP7: "Safe event detachment base class for Windows Phone 7 behaviors" Joost van Schaik Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up From SilverlightCream.com:31 Days of Mango | Day #22: App ConnectMatt Eland takes the reigns of Jeff's blog for Day 22 and is talking about App Connect... App Connect allows apps to be listed on Quick Cards relative to an app's subject matter, and Quick Cards are items that appear in searches to let users find out more info... check out the blog post if you're not familiar with this31 Days of Mango | Day #21: SocketsJeff's Day 21 is written by Parag Joshi, and is on sockets... and is building a WP7 app for posting restaurant orders to a Silverlight OOB app running on a host machine... good sized tutorial and discussion, plus a project to download and play with31 Days of Mango | Day #20: Creating RingtonesJerrel Blankenship has Day 20 for Jeff Blankenburg's 31 Days of Mango and is discussing Ringtones... how to create and save a custom ringtone for your userSafe event detachment base class for Windows Phone 7 behaviorsJoost van Schaik revisits his Safe Event Detachment pattern for WP7 and built a base class to take care of the initialization involved to be kind to us, the developers... code includedStay in the 'Light!Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCreamJoin me @ SilverlightCream | Phoenix Silverlight User GroupTechnorati Tags:Silverlight    Silverlight 3    Silverlight 4    Windows PhoneMIX10

    Read the article

  • How to install software packages on a shared Red Hat Linux host account without root access or rpm?

    - by jeff
    I have a shared RHEL 4 host account where I do not have root privileges. I would like to install Git and Bash Complete in a way that they can be upgraded easily. To date, I've just been installing from source providing $HOME as a prefix to autoconf. Obviously this isn't ideal as I need to hunt down the files associated with the version I'm upgrading away from and delete them. I've tried using rpm but I just get -bash: rpm: command not found back so it's not available. I also looked into checkinstall but it looks like that requires rpm, dpkg, or Slackware's package manager to be available. Is there anything out there that can be used like a package manager without requiring root access or an existing package manager?

    Read the article

  • Simultaneous read/write to RAID array slows server to a crawl

    - by Jeff Leyser
    Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

    Read the article

  • How to set minimum SQL Server resource allocation for a database?

    - by Jeff Widmer
    Over the past Christmas holiday week, when the website I work on was experiencing very low traffic, we saw several Request timed out exceptions (one on each day 12/26, 12/28, 12/29, and 12/30) on several pages that require user authentication. We rarely saw Request timed out exceptions prior to this very low traffic week. We believe the timeouts were due to the database that it uses being "spun down" on the SQL Server and taking longer to spin up when a request came in. There are 2 databases on the SQL Server (SQL Server 2005), one which is specifically for this application and the other for the public facing website and for authentication; so in the case where users were not logged into the application (which definitely could have been for several hours at a time over Christmas week) the application database probably received no requests. We think at this point SQL Server reallocated resources to the other database and then when a request came in, extra time was needed to spin up the application database and the timeout occurred. Is there a way to tell SQL Server to give a minimum amount of resources to a database at all times?

    Read the article

  • IIS: changing site's home directory while site is running

    - by Jeff Stewart
    I'm trying to understand exactly what IIS 6.0 (on Windows Server 2003) does when I change the "Local Path" of a web site's Home Directory while the site is running. (Specifically with regard to ASP.NET applications.) I'm trying to build support for or against this practice in a deployment scenario: e.g. deploy the new code alongside the old code, then simply switch the IIS web site's local path to the folder containing the new code. IIS seems to handle this gracefully, but I notice that w3wp.exe still keeps some handles on the old code folder after the change. That's strange to me, because I would have expected IIS to recycle the application pool if this happened. Is this safe? Is the behavior well-defined?

    Read the article

  • Office 2011 Mac - Unable to save Word files, plus normal.dot alert errors

    - by Jeff D
    There are actually 3 errors here. When I open Word, I get: Word cannot open the existing global template. () If I create a file, type a character and try to save to the desktop (that I have no problems writing to otherwise), I get: Word cannot save or create this file. The disk may be full or write-protected. Try one or more of the following: * Free more memory * Make sure that the disk you want to save the file on is not full, write-protected, or damaged. () I am just saving to the desktop, and I can save excel files (or anything else) there. After the failure, if I save again, the default file name becomes: .doc...doc Weird. Finally, when I close word completely, I get: Do you want to replace the existing Normal.dotm.

    Read the article

  • Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

    - by Jeff Carr
    I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

    Read the article

  • Redirect an Apache2 SSL VirtualHost with mod_alias

    - by Jeff
    I want to make sure there aren't any odd behaviors that I don't know about when redirecting a SSL VirtualHost with mod_alias Redirect as outlined by Apache here. My code seems to work, but since SSL virtual hosts are restricted to just one IP address, I want to make sure there aren't any problems eluding me. Explicitly not using TLS. I'm stuck with Apache 2.2 for now. <VirtualHost *:443> ServerName example.com SSLEngine On Redirect 301 / https://www.example.com/ </VirtualHost> <VirtualHost *:443> ServerName www.example.com SSLEngine On # Do stuff # </VirtualHost> So I guess my question is, should SSL VirtualHost redirection with mod_alias Redirect work the same as non-SSL redirection?

    Read the article

  • rsyslog from Heroku drain creates empty log files

    - by Jeff Lee
    I'm sending logs from my Heroku app to an rsyslog server, but the resulting log files seem to come up empty. The rsyslog configuration for receiving remote messages is as follows: $template RemoteDailyLog,"/var/log/remote/%hostname%/%$year%/%$month%/%$day%.log" :fromhost-ip, !isequal, "127.0.0.1" -?RemoteDailyLog & ~ My complete rsyslog configuration is available in this paste. This configuration appears to create the directories correctly. I see the Heroku app's logging hostname (of the form "d.xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx") appear in /var/log on the rsyslog host, which implies that log messages are successfully making it to the logging daemon, but the resulting logfiles are zero-size. I'm guessing the issue is with rsyslog, rather than Heroku, but I'm not sure where to look next.

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • How do I improve my screen resolution in Windows Remote Desktop?

    - by Jeff
    I'm RDP'ing into a Win2K3 machine from a WinXP machine, and I cannot stand the low screen resolution I get on the Win2K3 box. Text is too large and the graphics/colors aren't very smooth. How do I improve this? If I right-click on the desktop of the remote machine and go to Properties - Settings, I see that the screen resolution is set to 1280x1024 (should be okay, I would think), and the color quality is Medium (16 bit) (not optimal) and I don't have the option to change either setting (because they're set in the .rdp file for the session, right?). If I move over to the Appearance tab, I see that font size is set to Normal, with no option to make it smaller. The thing is, these settings are close to what I have on the XP machine I'm RDP'ing in from. The only difference (in those settings) is the color quality, which is 32 bit. Any ideas on how I can improve the situation? Other tidbits: The graphics card on the Win2K3 machine is ATI ES1000. I think I have the latest drivers for it. I'm running VMware Workstation on the Win2K3 machine, and if I create a Win2K3 VM and RDP into it from the XP machine, the resolution is just fine.

    Read the article

  • apache webserver unresponsible with server-status showing all child processes waiting for connection

    - by Jeff
    My setup: i have 3 nearly identical webserver machines serving the same high loaded dynamic website with simple load balancing over dns. The service has been working for over two ears with the same apache config. apache2, php5, ubuntu 8.04 linux 2.6.24-29-server My problem: since about two weeks i'm experiencing problems with this config. Nearly every day i have one small moment about 5 minutes, in which the website is unreachable. I'm still able to login to the servers over ssh. If i run htop, i see the machine simply doing nothing. i have about 1000 apache processes running, but no cpu activity. i've used the apache mod_status to debug this situation. the process scoreboard looks like this: _C.___K_______________________R._______.__K_K____K___C_______.__ _______C__________.___________________________________.________C _.____K__________K___K_WK_____._K_____________________________._ W______K__________K________.____________________._______C_______ _C_.__K__K____.._.._____________________________________C_______ _R___________K___.______C________.C_________.______._____C______ ____________KKC____K_____K__WC_________________C_____.__.____.__ _____________________C_________K______.____C______._____________ _.___C____.___.___________________________.K______.____K________ W__.___________________C.__.____K________K_______R_._.__._______ __C__C_.__________C__C_______._____W______________C_.___C_______ ____.______C_____________C________.____C____________.________._K __.__________.K_____________K_________._____C____.K__________KW_ __K.W________R_________._______.___W___________.____.__K_____W__ W___.___..________W____K Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process So the most of the processes are just waiting for connection. after about 5 minutes the situation will return to normal: i have lot least processes on every machine, the most workers have the "."-status (meaing they are open to process a request) and of course the website is reachable! so i'm trying to find something in the logs, but there is simply nothing... the apache access log is silent for about 4 minutes, the same is for the error log. i also can not figure out anything wrong in other system logs. the situation is the same on all 3 webservers (all of them have this load peak and unresposibility at the same time), so i do not thing this is hardware related. but i think, this might be related to some network (tcp) issue. any ideas? EDIT: some more information, that i have just discovered: it has just happened again. and i was able to verify that i'm also not able to connect locally when this problem occurs. i have made some connection statistics with the following command after it happend netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 109 CLOSE_WAIT 2652 ESTABLISHED 2 FIN_WAIT1 11 LAST_ACK 12 LISTEN 91 SYN_RECV 1 SYN_SENT 16 TIME_WAIT If i execute the same command some time later, i have something like this: 4 CLOSING 108 ESTABLISHED 18 FIN_WAIT1 182 FIN_WAIT2 37 LAST_ACK 12 LISTEN 50 SYN_RECV 11276 TIME_WAIT So in the normal situation i have only 100-200 open connections by clients beeing handled by apache in this moment. when i have this "crash", i have a lot more connections. what is the best way to analyse this? EDIT2: the important lines in apache2.conf are: KeepAlive On MaxKeepAliveRequests 20 KeepAliveTimeout 1 <IfModule mpm_prefork_module> ServerLimit 920 StartServers 30 MinSpareServers 80 MaxSpareServers 120 MaxClients 920 MaxRequestsPerChild 700 </IfModule> it is an apache2 prefork with php_mod. the server has 8GB ram and a 4gb swap partition.

    Read the article

  • Timezone reset on Amazon AMI update

    - by Jeff
    I have a server set up through Amazon AWS. It's Amazon's RHEL-based AMI. When I initially booted up the machine, I set the proper timezone by creating a symlink: ln -sf /usr/share/zoneinfo/America/Los_Angeles /etc/localtime This works just fine, but whenever Amazon provides an update to their AMI the timezone automatically reverts to UTC. Is there a way around this or does it have to be manually set after each update?

    Read the article

  • Do RAID controllers commonly have SATA drive brand compatibility issues?

    - by Jeff Atwood
    We've struggled with the RAID controller in our database server, a Lenovo ThinkServer RD120. It is a rebranded Adaptec that Lenovo / IBM dubs the ServeRAID 8k. We have patched this ServeRAID 8k up to the very latest and greatest: RAID bios version RAID backplane bios version Windows Server 2008 driver This RAID controller has had multiple critical BIOS updates even in the short 4 month time we've owned it, and the change history is just.. well, scary. We've tried both write-back and write-through strategies on the logical RAID drives. We still get intermittent I/O errors under heavy disk activity. They are not common, but serious when they happen, as they cause SQL Server 2008 I/O timeouts and sometimes failure of SQL connection pools. We were at the end of our rope troubleshooting this problem. Short of hardcore stuff like replacing the entire server, or replacing the RAID hardware, we were getting desperate. When I first got the server, I had a problem where drive bay #6 wasn't recognized. Switching out hard drives to a different brand, strangely, fixed this -- and updating the RAID BIOS (for the first of many times) fixed it permanently, so I was able to use the original "incompatible" drive in bay 6. On a hunch, I began to assume that the Western Digital SATA hard drives I chose were somehow incompatible with the ServeRAID 8k controller. Buying 6 new hard drives was one of the cheaper options on the table, so I went for 6 Hitachi (aka IBM, aka Lenovo) hard drives under the theory that an IBM/Lenovo RAID controller is more likely to work with the drives it's typically sold with. Looks like that hunch paid off -- we've been through three of our heaviest load days (mon,tue,wed) without a single I/O error of any kind. Prior to this we regularly had at least one I/O "event" in this time frame. It sure looks like switching brands of hard drive has fixed our intermittent RAID I/O problems! While I understand that IBM/Lenovo probably tests their RAID controller exclusively with their own brand of hard drives, I'm disturbed that a RAID controller would have such subtle I/O problems with particular brands of hard drives. So my question is, is this sort of SATA drive incompatibility common with RAID controllers? Are there some brands of drives that work better than others, or are "validated" against particular RAID controller? I had sort of assumed that all commodity SATA hard drives were alike and would work reasonably well in any given RAID controller (of sufficient quality).

    Read the article

  • Loss of network connectivity when playing video on Optoma HD180 projector

    - by Jeff Fohl
    Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

    Read the article

  • Manually accessing GMail via IMAP

    - by Jeff Mc
    I'm trying to connect to gmail imap, but I am unable to execute any commands after login. I'm running openssl s_client -connect imap.gmail.com:993 to connect then, * OK Gimap ready for requests from 128.146.221.118 42if6514983iwn.40 . CAPABILITY * CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY SASL-IR AUTH=XOAUTH . OK Thats all she wrote! 42if6514983iwn.40 . LOGIN {email removed} {password removed} * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE . OK {email removed} authenticated (Success) . CAPABILITY at which point it simply hangs with the connection open. I'm guessing gmail pushes you off to a node in a cluster after it authenticate me?

    Read the article

  • Website doesn't work when missing "www"

    - by jeff
    Hello everyone, Does anyone know the solution to this problem? I checked my zone file and there are 2 A records mydomainname.com. 14400 IN A ip.address.x.x localhost 14400 IN A 127.0.0.1 I'm On CentOs 5.2, by the way. Thanks for the help!!

    Read the article

  • exchange 2003 to 2007, recipient update services

    - by Jeff
    going to try my best to explain: our exchange 2003 was migrated to exchange 2007 (was not here for the migration). Looking in active directory sites and services - services - Microsoft exchange - company - address list container - recipient update services i have two recipient update services 1) recipient update service (enterprise configuration) 2) recipient update service (my-domain) my guess is one of these is left from the old exchange 2003. (im guessing this because the migration was not done properly, the exchange server was never actually uninstall, it was just taken offline, and then later disposed of). could having two of these cause me issues, and if so, how do i know which one i could get rid of ? Im asking because i honestly have no idea. it might even be nothing. thanks

    Read the article

  • Which Twitter app do you use?

    - by Jeff Fritz
    It seems like everyone is writing their own Twitter front-end application nowadays. So I must ask: What is your preferred Twitter front-end management application? Please discuss: Form Factor: Desktop, Mobile, Web based OS Support: Windows, Mac, Linux, iPhone, BlackBerry, etc Killer Feature that made you convert Please try to format your responses using the bullet points above. This way, we can all easily compare features. Please list 1 app per response

    Read the article

  • 2 subnets off of 1 PC with 2 NICs

    - by Jeff
    I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >