multi module - Page 15 - Developer IT

Fast Ethernet module for Cisco 2620

- by Kenny Rasschaert

I have a Cisco 2620 Router. It comes with one fast ethernet port built in (circled in red), and one old AUI ethernet module is installed (circled in blue). I figure I can put a transceiver on the AUI interface to get a second RJ45 connector. What I'd really like to have is a second fast ethernet connector. The ideal candidate to achieve this would be the NM-1FE-TX module. Cisco claims on their website that this module is not suitable for the Cisco 2620 and Cisco 2620XM. It says so in "Table 2 Physical Limitation of Serial Modules per Chassis". Indeed, this module was designed for the 3600 series of routers. I've seen claims on the internet, however, of people having this module on a 2620XM, and it being fully functional. This claim gains some credibility because of the fact that in Cisco's own Packet Tracer software, you can install this module on the 2620XM router. I'm looking for a definitive answer. Will this module work on a Cisco 2620? Is there perhaps another way to get a second fast ethernet port on this device?

Read the article

Request Limit Length Limits for IIS’s requestFiltering Module

- by Rick Strahl

Today I updated my CodePaste.net site to MVC 3 and pushed an update to the site. The update of MVC went pretty smooth as well as most of the update process to the live site. Short of missing a web.config change in the /views folder that caused blank pages on the server, the process was relatively painless. However, one issue that kicked my ass for about an hour – and not foe the first time – was a problem with my OpenId authentication using DotNetOpenAuth. I tested the site operation fairly extensively locally and everything worked no problem, but on the server the OpenId returns resulted in a 404 response from IIS for a nice friendly OpenId return URL like this: http://codepaste.net/Account/OpenIdLogon?dnoa.userSuppliedIdentifier=http%3A%2F%2Frstrahl.myopenid.com%2F&dnoa.return_to_sig_handle=%7B634239223364590000%7D%7BjbHzkg%3D%3D%7D&dnoa.return_to_sig=7%2BcGhp7UUkcV2B8W29ibIDnZuoGoqzyS%2F%2FbF%2FhhYscgWzjg%2BB%2Fj10ZpNdBkUCu86dkTL6f4OK2zY5qHhCnJ2Dw%3D%3D&openid.assoc_handle=%7BHMAC-SHA256%7D%7B4cca49b2%7D%7BMVGByQ%3D%3D%7D&openid.claimed_id=http%3A%2F%2Frstrahl.myopenid.com%2F&openid.identity=http%3A%2F%2Frstrahl.myopenid.com%2F&openid.mode=id_res&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.ns.sreg=http%3A%2F%2Fopenid.net%2Fextensions%2Fsreg%2F1.1&openid.op_endpoint=http%3A%2F%2Fwww.myopenid.com%2Fserver&openid.response_nonce=2010-10-29T04%3A12%3A53Zn5F4r5&openid.return_to=http%3A%2F%2Fcodepaste.net%2FAccount%2FOpenIdLogon%3Fdnoa.userSuppliedIdentifier%3Dhttp%253A%252F%252Frstrahl.myopenid.com%252F%26dnoa.return_to_sig_handle%3D%257B634239223364590000%257D%257BjbHzkg%253D%253D%257D%26dnoa.return_to_sig%3D7%252BcGhp7UUkcV2B8W29ibIDnZuoGoqzyS%252F%252FbF%252FhhYscgWzjg%252BB%252Fj10ZpNdBkUCu86dkTL6f4OK2zY5qHhCnJ2Dw%253D%253D&openid.sig=h1GCSBTDAn1on98sLA6cti%2Bj1M6RffNerdVEI80mnYE%3D&openid.signed=assoc_handle%2Cclaimed_id%2Cidentity%2Cmode%2Cns%2Cns.sreg%2Cop_endpoint%2Cresponse_nonce%2Creturn_to%2Csigned%2Csreg.email%2Csreg.fullname&openid.sreg.email=rstrahl%40host.com&openid.sreg.fullname=Rick+Strahl A 404 of course isn’t terribly helpful – normally a 404 is a resource not found error, but the resource is definitely there. So how the heck do you figure out what’s wrong? If you’re just interested in the solution, here’s the short version: IIS by default allows only for a 1024 byte query string, which is obviously exceeded by the above. The setting is controlled by the RequestFiltering module in IIS 6 and later which can be configured in ApplicationHost.config (in \%windir\system32\inetsvr\config). To set the value configure the requestLimits key like so: <configuration> <security> <requestFiltering> <requestLimits maxQueryString="2048"> </requestLimits> </requestFiltering> </security> </configuration> This fixed me right up and made the requests work. How do you find out about problems like this? Ah yes the troubles of an administrator? Read on and I’ll take you through a quick review of how I tracked this down. Finding the Problem The issue with the error returned is that IIS returns a 404 Resource not found error and doesn’t provide much information about it. If you’re lucky enough to be able to run your site from the localhost IIS is actually very helpful and gives you the right information immediately in a nicely detailed error page. The bottom of the page actually describes exactly what needs to be fixed. One problem with this easy way to find an error: You HAVE TO run localhost. On my server which has about 10 domains running localhost doesn’t point at the particular site I had problems with so I didn’t get the luxury of this nice error page. Using Failed Request Tracing to retrieve Error Info The first place I go with IIS errors is to turn on Failed Request Tracing in IIS to get more error information. If you have access to the server to make a configuration change you can enable Failed Request Tracing like this: Find the Failed Request Tracing Rules in the IIS Service Manager. Select the option and then Edit Site Tracing to enable tracing. Then add a rule for * (all content) and specify status codes from 100-999 to capture all errors. if you know exactly what error you’re looking for it might help to specify it exactly to keep the number of errors down. Then run your request and let it fail. IIS will throw error log files into a folder like this C:\inetpub\logs\FailedReqLogFiles\W3SVC5 where the last 5 is the instance ID of the site. These files are XML but they include an XSL stylesheet that provides some decent formatting. In this case it pointed me straight at the offending module: Ok, it’s the RequestFilteringModule. Request Filtering is built into IIS 6-7 and configured in ApplicationHost.config. This module defines a few basic rules about what paths and extensions are allowed in requests and among other things how long a query string is allowed to be. Most of these settings are pretty sensible but the query string value can easily become a problem especially if you’re dealing with OpenId since these return URLs are quite extensive. Debugging failed requests is never fun, but IIS 6 and forward at least provides us the tools that can help us point in the right direction. The error message the FRT report isn’t as nice as the IIS error message but it at least points at the offending module which gave me the clue I needed to look at request restrictions in ApplicationHost.config. This would still be a stretch if you’re not intimately familiar, but I think with some Google searches it would be easy to track this down with a few tries… Hope this was useful to some of you. Useful to me to put this out as a reminder – I’ve run into this issue before myself and totally forgot. Next time I got it, right?© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET Security

Read the article

Which LAN card / module combinations proven to work with Wake on LAN

- by pablomo

I've got a 12.04 headless server that I've been trying to get to work with wake-on-lan. The card is Marvel 88E8053 using the sky2 module. Although WOL is enabled in BIOS and ethtool shows the card as WOL enabled, it refuses to wake when I send the magic packet. I have verified that the packet is being received OK when the machine is on. The machine does wake OK from a BIOS alarm which suggests it is a network card issue. I've seen reference to bugs in sky2 that mean WOL fails in recent versions of Ubuntu (and have tried a module conf file as suggested here but to no avail) So I am thinking the best bet is to replace the ethernet card with one that definitely works with WOL in 12.04 - please could you post your card make and model no if you are using it successfully?

Read the article

Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

[Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

Read the article

Approach on working with many programmers on one module/feature

- by Panoy

How can 2 or more developers code a certain feature/module of a software? Let's assume that the module is big and feature rich. How would they prevent each other from overlapping their code? Say, we have the same method but is implemented in a different way. Do you think it might be better to have one focused at a specific feature only? Is a version control system like Git would help solve the problem? Is it correct that it allows developers to have these "branches" and then merge it later on? What's your take on this?

Read the article

Install squid3 + and eCAP module

- by Hacker

I want to install squid3 and eCAP module on my latest ubuntu. Squid installed well with command i followed these instructions. http://e-healthexpert.org/node/431 sudo apt-get install squid3 but how do i configure it to enable eCAP module ?. I need to give something like --enable-ecap option while installation, which i could not. Then i tried to manually install using http://code.google.com/p/squid-ecap-gzip/source/browse/wiki/Installation.wiki?r=24 but while installing squid3 it gives error. i.e. command sudo make gives some g++ error. SO how do i install it and configure for eCAP. please h

Read the article

How to set the skin of a DotNetNuke page through code?

- by ks78

I'm working on a DNN module that creates DNN pages (tabs) and places DNN modules on them through code. So, far that's working very well. However, I'd like it to also be able to programmatically set the page's skin and place the modules in the appropriate pane. Does anyone know how to do this using code? Solution: I set SkinSrc and ContainerSrc as mika suggested. Here's my source, if you're interested. This is where I set SkinSrc. ''' <summary>Create new DNN tab/page.</summary> Private Function CreatePage(ByVal ParentID As Integer, ByVal PageName As String, ByVal PageTitle As String, ByVal Description As String, ByVal Keywords As String, ByVal Permissions As TabPermissionCollection, Optional ByVal SkinSrc As String = "", Optional ByVal isVisible As Boolean = True, Optional ByVal LoadDefaultModules As Boolean = True) As Tabs.TabInfo Try Dim tabCtrlr As New TabController Dim newTab As New Tabs.TabInfo Dim newPermissions As TabPermissionCollection = newTab.TabPermissions Dim permissionProvider As PermissionProvider = permissionProvider.Instance Dim infPermission As TabPermissionInfo ' set new page properties newTab.PortalID = PortalId newTab.TabName = PageName newTab.Title = PageTitle newTab.Description = Description newTab.KeyWords = Keywords newTab.IsDeleted = False newTab.IsSuperTab = False newTab.IsVisible = isVisible newTab.DisableLink = False newTab.IconFile = "" newTab.Url = "" newTab.ParentId = ParentID 'add skinsrc if specified If (SkinSrc.Length > 0) Then newTab.SkinSrc = SkinSrc ' create new page tabCtrlr.AddTab(newTab, LoadDefaultModules) ' copy permissions selected in Permissions collection For index As Integer = 0 To (Permissions.Count - 1) infPermission = New TabPermissionInfo infPermission.AllowAccess = Permissions(index).AllowAccess infPermission.RoleID = Permissions(index).RoleID infPermission.RoleName = Permissions(index).RoleName infPermission.TabID = Permissions(index).TabID infPermission.PermissionID = Permissions(index).PermissionID 'save permission info newPermissions.Add(infPermission, True) permissionProvider.SaveTabPermissions(newTab) Next index 'return TabInfo of new page Return newTab Catch ex As Exception 'failure Return New Tabs.TabInfo End Try End Function These next two functions were taken from the DNN source and tweaked slightly, so I can't take credit for much of them. Also, if you use these in your own modules there could be issues when upgrading DNN. Although the upgrade from 5.05 to 5.06 went smoothly for me. In the AddNewModule function, I used ContainerSrc to specify the custom container to use. PaneName is the property used to specify which panel the module should be placed in. #Region "From DNN Source --mostly" #Region "Enums" Private Enum ViewPermissionType View = 0 Edit = 1 End Enum #End Region ''' ----------------------------------------------------------------------------- ''' <summary>Adds a New Module to a Pane</summary> ''' <param name="align">The alignment for the Module</param> ''' <param name="desktopModuleId">The Id of the DesktopModule</param> ''' <param name="permissionType">The View Permission Type for the Module</param> ''' <param name="title">The Title for the resulting module</param> ''' <param name="paneName">The pane to add the module to</param> ''' <param name="position">The relative position within the pane for the module</param> ''' ----------------------------------------------------------------------------- Private Function AddNewModule(ByVal TabID As Integer, ByVal title As String, ByVal desktopModuleId As Integer, ByVal paneName As String, ByVal position As Integer, ByVal permissionType As ViewPermissionType, ByVal align As String) As Integer Dim objTabController As New TabController Dim objTabPermissions As TabPermissionCollection = objTabController.GetTab(TabID, PortalId, True).TabPermissions Dim objPermissionController As New PermissionController Dim objModules As New ModuleController Dim objModuleDefinition As ModuleDefinitionInfo Dim objEventLog As New Services.Log.EventLog.EventLogController Dim newModuleID As Integer Dim j As Integer Try Dim desktopModule As DesktopModuleInfo = Nothing If Not DesktopModuleController.GetDesktopModules(PortalSettings.PortalId).TryGetValue(desktopModuleId, desktopModule) Then Throw New ArgumentException("desktopModuleId") End If Catch ex As Exception LogException(ex) End Try Dim UserId As Integer = -1 If Request.IsAuthenticated Then Dim objUserInfo As Users.UserInfo = UserController.GetCurrentUserInfo UserId = objUserInfo.UserID End If For Each objModuleDefinition In ModuleDefinitionController.GetModuleDefinitionsByDesktopModuleID(desktopModuleId).Values Dim objModule As New ModuleInfo objModule.Initialize(PortalSettings.PortalId) objModule.PortalID = PortalSettings.PortalId objModule.TabID = TabID objModule.ModuleOrder = position If title = "" Then objModule.ModuleTitle = objModuleDefinition.FriendlyName Else objModule.ModuleTitle = title End If objModule.PaneName = paneName objModule.ModuleDefID = objModuleDefinition.ModuleDefID If objModuleDefinition.DefaultCacheTime > 0 Then objModule.CacheTime = objModuleDefinition.DefaultCacheTime If Portals.PortalSettings.Current.DefaultModuleId > Null.NullInteger AndAlso Portals.PortalSettings.Current.DefaultTabId > Null.NullInteger Then Dim defaultModule As ModuleInfo = objModules.GetModule(Portals.PortalSettings.Current.DefaultModuleId, Portals.PortalSettings.Current.DefaultTabId, True) If Not defaultModule Is Nothing Then objModule.CacheTime = defaultModule.CacheTime End If End If End If Select Case permissionType Case ViewPermissionType.View objModule.InheritViewPermissions = True Case ViewPermissionType.Edit objModule.InheritViewPermissions = False End Select ' get the default module view permissions Dim arrSystemModuleViewPermissions As ArrayList = objPermissionController.GetPermissionByCodeAndKey("SYSTEM_MODULE_DEFINITION", "VIEW") ' get the permissions from the page For Each objTabPermission As TabPermissionInfo In objTabPermissions If objTabPermission.PermissionKey = "VIEW" AndAlso permissionType = ViewPermissionType.View Then 'Don't need to explicitly add View permisisons if "Same As Page" Continue For End If ' get the system module permissions for the permissionkey Dim arrSystemModulePermissions As ArrayList = objPermissionController.GetPermissionByCodeAndKey("SYSTEM_MODULE_DEFINITION", objTabPermission.PermissionKey) ' loop through the system module permissions For j = 0 To arrSystemModulePermissions.Count - 1 ' create the module permission Dim objSystemModulePermission As PermissionInfo objSystemModulePermission = CType(arrSystemModulePermissions(j), PermissionInfo) If objSystemModulePermission.PermissionKey = "VIEW" AndAlso permissionType = ViewPermissionType.Edit AndAlso _ objTabPermission.PermissionKey <> "EDIT" Then 'Only Page Editors get View permissions if "Page Editors Only" Continue For End If Dim objModulePermission As ModulePermissionInfo = AddModulePermission(objModule, _ objSystemModulePermission, _ objTabPermission.RoleID, objTabPermission.UserID, _ objTabPermission.AllowAccess) ' ensure that every EDIT permission which allows access also provides VIEW permission If objModulePermission.PermissionKey = "EDIT" And objModulePermission.AllowAccess Then Dim objModuleViewperm As ModulePermissionInfo = AddModulePermission(objModule, _ CType(arrSystemModuleViewPermissions(0), PermissionInfo), _ objModulePermission.RoleID, objModulePermission.UserID, _ True) End If Next 'Get the custom Module Permissions, Assume that roles with Edit Tab Permissions 'are automatically assigned to the Custom Module Permissions If objTabPermission.PermissionKey = "EDIT" Then Dim arrCustomModulePermissions As ArrayList = objPermissionController.GetPermissionsByModuleDefID(objModule.ModuleDefID) ' loop through the custom module permissions For j = 0 To arrCustomModulePermissions.Count - 1 ' create the module permission Dim objCustomModulePermission As PermissionInfo objCustomModulePermission = CType(arrCustomModulePermissions(j), PermissionInfo) AddModulePermission(objModule, objCustomModulePermission, _ objTabPermission.RoleID, objTabPermission.UserID, _ objTabPermission.AllowAccess) Next End If Next objModule.AllTabs = False objModule.Alignment = align 'apply Custom Container to module objModule.ContainerSrc = CONTAINER_TRANSPARENT_PLAIN newModuleID = objModules.AddModule(objModule) Next Return newModuleID End Function ''' ----------------------------------------------------------------------------- ''' <summary>Adds a Module Permission</summary> ''' <param name="permission">The permission to add</param> ''' <param name="roleId">The Id of the role to add the permission for.</param> ''' ----------------------------------------------------------------------------- Private Function AddModulePermission(ByVal objModule As ModuleInfo, ByVal permission As PermissionInfo, ByVal roleId As Integer, ByVal userId As Integer, ByVal allowAccess As Boolean) As ModulePermissionInfo Dim objModulePermission As New ModulePermissionInfo objModulePermission.ModuleID = objModule.ModuleID objModulePermission.PermissionID = permission.PermissionID objModulePermission.RoleID = roleId objModulePermission.UserID = userId objModulePermission.PermissionKey = permission.PermissionKey objModulePermission.AllowAccess = allowAccess ' add the permission to the collection If Not objModule.ModulePermissions.Contains(objModulePermission) Then objModule.ModulePermissions.Add(objModulePermission) End If Return objModulePermission End Function #End Region

Read the article

Bumblebee : Module bbswitch could not be loaded

- by StepTNT

I've upgraded to 12.04 and I had to switch from Ironhide to the latest version of Bumblebee. Now, when I try to run bumblebeed, I get this error: FATAL: Module bbswitch not found. [ERROR]Module bbswitch could not be loaded (timeout?) [WARN]No switching method available. The dedicated card will always be on. I don't really need to use the secondary VGA on Kubuntu, so I would like to find a way to definitely shut the discrete GPU down and avoid wasting battery. I can't disable it from the BIOS because I use it on Windows. My card is an nvidia 540M.

Read the article

What CPAN module can send all warnings and errors to a log file?

- by mithaldu

I'm maintaining some website code that currently dumps all errors and warnings into the apache log. This is a problem for me as i cannot access that due to lack of root. As such I am looking to redirect all warnings and errors to a specified log file under my control. I'd like to do so without preventing those messages from going through their usual patch of execution. Now, before i spend a lot of time fiddling with the Perl internals and possibly breaking things unawares I thought I'd look for a CPAN module that does this. However, I either do not know how to properly search for this, or I am overlooking something and thus cannot find any module that seems suitable. Thus my asking here: What CPAN module would i use for this task?

Read the article

Module loaded even though it's blacklisted

- by isakkarlsson

System: Ubuntu 11.10 Linux gray 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux I'm trying to blacklist a module (rt2800usb among other) like; $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 $ emacs /etc/modprobe.d/blacklist.conf and add: blacklist rt2800usb blacklist rt2800lib blacklist rt2x00usb blacklist rt2x00lib and then: $ sudo update-initramfs -u $ sudo reboot But the module are loaded after reboot: $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 How do I make the changes persist (i.e. have the modules blacklisted) after reboot?

Read the article

Recordings Available - Features and Functions Accounting Module

- by MHundal

Recordings are available to provide a high-level overview of the ETPM Accounting Module. The Accounting Module includes Financial Transactions, Adjustments, P&I, Waivers, Overpayments, General Ledger Details, etc... The following three recordings contain a presentation with the primary concepts to be covered and then a walk-thru of the application to look at the concepts being described. ETPM Functions & Features: Accounting Overview: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=67367292&rKey=443823012d0fc43e ETPM Functions & Features: Accounting - P&I, Waivers: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=67432777&rKey=64eb220a56d8e32f ETPM Functions & Features - Accounting - Rates: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=67370637&rKey=63ca9024ce3b4398

Read the article

Recordings Available - Features & Functions Forms Module

- by MHundal

ETPM provides robust Forms functionality that allows implementations to configure Registration & Tax Forms, configure Form Rules and process the Forms. The Forms Definition allows for defining the Form Sections and Form Lines. The Forms Generator uses the Forms Definition details to create the necessary Business Objects, Application Security and User Interfaces to allow interaction with the Forms. Form Rules are used for validation of the Form Line details and creating entities in the system (creating taxpayers, accounts, financial transactions, etc...). The following recordings provide an overview of the Forms Definition Process, Form Rules and other important concepts part of the Forms Module. Forms Module Overview: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=66851417&rKey=7de22df4978e7974 Forms Configuration Overview: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=66964342&rKey=ea564cfd701bb32d Form Rules Overview: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=66966652&rKey=2e02c1e28e058d70

Read the article

XML/XSL Module 04.03.05 is now officially released.

XML/XSL Module 04.03.05 is a maintenance release. Download is available from Codeplex. Changes were required to fix issues caused by conflicts with a new namespace in DotNetNuke 5.3. as the XML module did not use fully qualified namespaces everywhere. Please upgrade to XML 4.3.5 before upgrading your DNN version to 5.3.1 and above. In case you missed this step and the entire application runs into a Yellow Screen of Death, the easiest workaround is to simply delete ~\App_Code\XML\Handlers\download.vb....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Importing Classes Within a Module

- by CodeJoust

Currently, I have a parser with multiple classes that work together. For Instance: TreeParser creates multiple Product and Reactant modules which in turn create multiple Element classes. The TreeParser is called by a render method within the same module, which is called from the importer. Currently, using the class name in the imported module file works only if the file calling the module contains from module_name import *, so the classes are imported into the main namespace. Finally, if the package has dependencies (such as re and another another module within the same folder), where is the best place to require those modules? Within the __init__.py file or within the module itself? I don't really want to add the module name in front of every call to the class, in case I do call import *, however, is it possible to use a variable name of the current module to call the class, or use a workaround in the __init__.py file? I'm probably used to the ruby require '' method instead of python's module system.

Read the article

Does a Perl module know where it is installed?

- by CoffeeMonster

Hi Perl programmers, I have started creating a Perl package that contains a default email template. The MANIFEST looks something like: SendMyEmail.pm SendMyEmail/defualt_email.tt Currently I know where the module (and the template) are - but does the module itself know where on disk it is? So could the module find the default template without my help? # This is what I would like to do. package SendMyEmail; sub new { my ($self, $template) = @_; $template ||= $dir_of_SendMyEmail .'/SendMyEmail/default_email.tt'; # ?? } Is there a better way of including a templates text, or a better place to put the template? Any references to CPAN modules that do something similar would be welcome. Thanks in advance.

Read the article

Dynamic Variable Names in Included Module in Ruby?

- by viatropos

I'm hoping to implement something like all of the great plugins out there for ruby, so that you can do this: acts_as_commentable has_attached_file :avatar But I have one constraint: That helper method can only include a module; it can't define any variables or methods. Here's what the structure looks like, and I'm wondering if you know the missing piece in the puzzle: # 1 - The workhorse, encapsuling all dynamic variables module My::Module def self.included(base) base.extend ClassMethods base.class_eval do include InstanceMethods end end module InstanceMethods self.instance_eval %Q? def #{options[:my_method]} "world!" end ? end module ClassMethods end end # 2 - all this does is define that helper method module HelperModule def self.included(base) base.extend(ClassMethods) end module ClassMethods def dynamic_method(options = {}) include My::Module(options) end end end # 3 - send it to active_record ActiveRecord::Base.send(:include, HelperModule) # 4 - what it looks like class TestClass < ActiveRecord::Base dynamic_method :my_method => "hello" end puts TestClass.new.hello #=> "world!" That %Q? I'm not totally sure how to use, but I'm basically just wanting to somehow be able to pass the options hash from that helper method into the workhorse module. Is that possible? That way, the workhorse module could define all sorts of functionality, but I could name the variables whatever I wanted at runtime.

Read the article

DotNetNuke Page module - Silverlight Edition

As part of the DotNetNuke Hackathon at the Capital DotNetNuke User Group on June 16th, I discussed using Silverlight to create rich DotNetNuke modules. The example that I presented was a work in progress which Ill be working on during the course of the Hackathon, even as participants are working on their own submissions. Youll be able to follow along with my progress over the next few days as I continue to flesh out the module. The module that I am working on is a Silverlight based replacement...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Pass Arguments to Included Module in Ruby?

- by viatropos

I'm hoping to implement something like all of the great plugins out there for ruby, so that you can do this: acts_as_commentable has_attached_file :avatar But I have one constraint: That helper method can only include a module; it can't define any variables or methods. The reason for this is because, I want the options hash to define something like type, and that could be converted into one of say 20 different 'workhorse' modules, all of which I could sum up in a line like this: def dynamic_method(options = {}) include ("My::Helpers::#{options[:type].to_s.camelize}").constantize(options) end Then those 'workhorses' would handle the options, doing things like: has_many "#{options[:something]}" Here's what the structure looks like, and I'm wondering if you know the missing piece in the puzzle: # 1 - The workhorse, encapsuling all dynamic variables module My::Module def self.included(base) base.extend ClassMethods base.class_eval do include InstanceMethods end end module InstanceMethods self.instance_eval %Q? def #{options[:my_method]} "world!" end ? end module ClassMethods end end # 2 - all this does is define that helper method module HelperModule def self.included(base) base.extend(ClassMethods) end module ClassMethods def dynamic_method(options = {}) # don't know how to get options through! include My::Module(options) end end end # 3 - send it to active_record ActiveRecord::Base.send(:include, HelperModule) # 4 - what it looks like class TestClass < ActiveRecord::Base dynamic_method :my_method => "hello" end puts TestClass.new.hello #=> "world!" That %Q? I'm not totally sure how to use, but I'm basically just wanting to somehow be able to pass the options hash from that helper method into the workhorse module. Is that possible? That way, the workhorse module could define all sorts of functionality, but I could name the variables whatever I wanted at runtime.

Read the article

PHP Module Programming with OXID eShop CE

Learn the fundamental principles of PHP module development with a working example of using a custom ...

Read the article

PHP Module Programming with OXID eShop CE

Learn the fundamental principles of PHP module development with a working example of using a custom ...

Read the article

Calling a Sub or Function contained in a module using "CallByName" in VB/VBA

- by Kratz

It is easy to call a function inside a classModule using CallByName How about functions inside standard module? 'inside class module 'classModule name: clsExample Function classFunc1() MsgBox "I'm class module 1" End Function ' 'inside standard module 'Module name: module1 Function Func1() MsgBox "I'm standard module 1" End Function ' ' The main sub Sub Main() ' to call function inside class module dim clsObj as New clsExample Call CallByName(clsObj,"ClassFunc1") ' here's the question... how to call a function inside a standard module ' how to declare the object "stdObj" in reference to module1? Call CallByName(stdObj,"Func1") ' is this correct? End Sub

Read the article

Ubuntu 10.04 not detecting multiple monitors

- by user28837

I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

Read the article

Problem with installing sqlite3 module for python 2.6 in ubuntu system

- by Hoang

Hi, I need to run sqlite3 module on python 2.6 in ubuntu system. How do I install this module for Python 2.6? Somehow I don't have this module, it raises the error: import sqlite3 Traceback (most recent call last): File "", line 1, in File "/usr/local/lib/python2.6/sqlite3/init.py", line 24, in from dbapi2 import * File "/usr/local/lib/python2.6/sqlite3/dbapi2.py", line 27, in from _sqlite3 import * ImportError: No module named _sqlite3

Read the article

MediaTemple Plesk Firewall Module

- by cappuccino

My MediaTemple Plesk Firewall Module seems to have just stop reflecting the rules in the iptables. I want to uninstall and reinstall the module, however, have no idea where to get the module package. Anyone know where to get the module?

Read the article

How to deploy the advanced search page using Module in SharePoint 2013

- by ybbest

Today, I’d like to show you how to deploy your custom advanced search page using module in Visual Studio 2012.Using a module is the way how SharePoint deploy all the publishing pages to the search centre. Browse to the template under 15 hive of SharePoint2013, then go to the SearchCenterFiles under Features(as shown below).Then open the Files.xml it shows how SharePoint using module to deploy advanced search.You can download the solution here. Now I am going to show you how to deploy your custom advanced search page.The feature is located in the C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\FEATURES\SearchCenterFiles . To deploy SharePoint advanced Search pages, you need to do the following: 1. Create SharePoint2013 project and then create a module item. 2. Find how Out of box SharePoint deploy the Advanced Search Page from Files.xml and copy and paste it into the elements.xml <File Url="advanced.aspx" Type="GhostableInLibrary"> <Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/AdvancedSearchLayout.aspx, $Resources:Microsoft.Office.Server.Search,SearchCenterAdvancedSearchTitle;" /> <Property Name="Title" Value="$Resources:Microsoft.Office.Server.Search,Search_Advanced_Page_Title;" /> <Property Name="ContentType" Value="$Resources:Microsoft.Office.Server.Search,contenttype_welcomepage_name;" /> <AllUsersWebPart WebPartZoneID="MainZone" WebPartOrder="1"> <![CDATA[ <WebPart xmlns="http://schemas.microsoft.com/WebPart/v2"> <Assembly>Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly> <TypeName>Microsoft.Office.Server.Search.WebControls.AdvancedSearchBox</TypeName> <Title>$Resources:Microsoft.Office.Server.Search,AdvancedSearch_Webpart_Title;</Title> <Description>$Resources:Microsoft.Office.Server.Search,AdvancedSearch_Webpart_Description;</Description> <FrameType>None</FrameType> <AllowMinimize>true</AllowMinimize> <AllowRemove>true</AllowRemove> <IsVisible>true</IsVisible> <SearchResultPageURL xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">results.aspx</SearchResultPageURL> <TextQuerySectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_FindDocsWith_Title;</TextQuerySectionLabelText> <ShowAndQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowAndQueryTextBox> <ShowPhraseQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPhraseQueryTextBox> <ShowOrQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowOrQueryTextBox> <ShowNotQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowNotQueryTextBox> <ScopeSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_NarrowSearch_Title;</ScopeSectionLabelText> <ShowLanguageOptions xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowLanguageOptions> <ShowResultTypePicker xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowResultTypePicker> <ShowPropertiesSection xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPropertiesSection> <PropertiesSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_AddPropRestrictions_Title;</PropertiesSectionLabelText> </WebPart> ]]> </AllUsersWebPart> </File> 3. Customize your SharePoint advanced Search Page by modifying the Advanced Search Box and Export the webpart and copy the webpart file to the elements under module. 4. Export the web part and copy the content of the web part file to the elements.xml in the module. <File Path="AdvancedSearchPage\advanced.aspx" Url="employeeAdvanced.aspx" Type="GhostableInLibrary"> <Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/AdvancedSearchLayout.aspx, $Resources:Microsoft.Office.Server.Search,SearchCenterAdvancedSearchTitle;" /> <Property Name="Title" Value="$Resources:Microsoft.Office.Server.Search,Search_Advanced_Page_Title;" /> <Property Name="ContentType" Value="$Resources:Microsoft.Office.Server.Search,contenttype_welcomepage_name;" /> <AllUsersWebPart WebPartZoneID="MainZone" WebPartOrder="1"> <![CDATA[ <WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2"> <Title>Advanced Search Box</Title> <FrameType>None</FrameType> <Description>Displays parameterized search options based on properties and combinations of words.</Description> <IsIncluded>true</IsIncluded> <ZoneID>MainZone</ZoneID> <PartOrder>1</PartOrder> <FrameState>Normal</FrameState> <Height /> <Width /> <AllowRemove>true</AllowRemove> <AllowZoneChange>true</AllowZoneChange> <AllowMinimize>true</AllowMinimize> <AllowConnect>true</AllowConnect> <AllowEdit>true</AllowEdit> <AllowHide>true</AllowHide> <IsVisible>true</IsVisible> <DetailLink /> <HelpLink /> <HelpMode>Modeless</HelpMode> <Dir>Default</Dir> <PartImageSmall /> <MissingAssembly>Cannot import this Web Part.</MissingAssembly> <PartImageLarge /> <IsIncludedFilter /> <Assembly>Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly> <TypeName>Microsoft.Office.Server.Search.WebControls.AdvancedSearchBox</TypeName> <SearchResultPageURL xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">results.aspx</SearchResultPageURL> <TextQuerySectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Find documents that have...</TextQuerySectionLabelText> <ShowAndQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowAndQueryTextBox> <AndQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowPhraseQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPhraseQueryTextBox> <PhraseQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowOrQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowOrQueryTextBox> <OrQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowNotQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowNotQueryTextBox> <NotQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ScopeSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Narrow the search...</ScopeSectionLabelText> <ShowScopes xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">false</ShowScopes> <ScopeLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <DisplayGroup xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Advanced Search</DisplayGroup> <ShowLanguageOptions xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">false</ShowLanguageOptions> <LanguagesLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowResultTypePicker xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowResultTypePicker> <ResultTypeLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowPropertiesSection xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPropertiesSection> <PropertiesSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Add property restrictions...</PropertiesSectionLabelText> <Properties xmlns="urn:schemas-microsoft-com:AdvancedSearchBox"><root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <LangDefs> <LangDef DisplayName="Arabic" LangID="ar"/> <LangDef DisplayName="Bengali" LangID="bn"/> <LangDef DisplayName="Bulgarian" LangID="bg"/> <LangDef DisplayName="Catalan" LangID="ca"/> <LangDef DisplayName="Simplified Chinese" LangID="zh-cn"/> <LangDef DisplayName="Traditional Chinese" LangID="zh-tw"/> <LangDef DisplayName="Croatian" LangID="hr"/> <LangDef DisplayName="Czech" LangID="cs"/> <LangDef DisplayName="Danish" LangID="da"/> <LangDef DisplayName="Dutch" LangID="nl"/> <LangDef DisplayName="English" LangID="en"/> <LangDef DisplayName="Finnish" LangID="fi"/> <LangDef DisplayName="French" LangID="fr"/> <LangDef DisplayName="German" LangID="de"/> <LangDef DisplayName="Greek" LangID="el"/> <LangDef DisplayName="Gujarati" LangID="gu"/> <LangDef DisplayName="Hebrew" LangID="he"/> <LangDef DisplayName="Hindi" LangID="hi"/> <LangDef DisplayName="Hungarian" LangID="hu"/> <LangDef DisplayName="Icelandic" LangID="is"/> <LangDef DisplayName="Indonesian" LangID="id"/> <LangDef DisplayName="Italian" LangID="it"/> <LangDef DisplayName="Japanese" LangID="ja"/> <LangDef DisplayName="Kannada" LangID="kn"/> <LangDef DisplayName="Korean" LangID="ko"/> <LangDef DisplayName="Latvian" LangID="lv"/> <LangDef DisplayName="Lithuanian" LangID="lt"/> <LangDef DisplayName="Malay" LangID="ms"/> <LangDef DisplayName="Malayalam" LangID="ml"/> <LangDef DisplayName="Marathi" LangID="mr"/> <LangDef DisplayName="Norwegian" LangID="no"/> <LangDef DisplayName="Polish" LangID="pl"/> <LangDef DisplayName="Portuguese" LangID="pt"/> <LangDef DisplayName="Punjabi" LangID="pa"/> <LangDef DisplayName="Romanian" LangID="ro"/> <LangDef DisplayName="Russian" LangID="ru"/> <LangDef DisplayName="Slovak" LangID="sk"/> <LangDef DisplayName="Slovenian" LangID="sl"/> <LangDef DisplayName="Spanish" LangID="es"/> <LangDef DisplayName="Swedish" LangID="sv"/> <LangDef DisplayName="Tamil" LangID="ta"/> <LangDef DisplayName="Telugu" LangID="te"/> <LangDef DisplayName="Thai" LangID="th"/> <LangDef DisplayName="Turkish" LangID="tr"/> <LangDef DisplayName="Ukrainian" LangID="uk"/> <LangDef DisplayName="Urdu" LangID="ur"/> <LangDef DisplayName="Vietnamese" LangID="vi"/> </LangDefs> <Languages> <Language LangRef="en"/> <Language LangRef="fr"/> <Language LangRef="de"/> <Language LangRef="ja"/> <Language LangRef="zh-cn"/> <Language LangRef="es"/> <Language LangRef="zh-tw"/> </Languages> <PropertyDefs> <PropertyDef Name="Path" DataType="url" DisplayName="URL"/> <PropertyDef Name="Size" DataType="integer" DisplayName="Size (bytes)"/> <PropertyDef Name="Write" DataType="datetime" DisplayName="Last Modified Date"/> <PropertyDef Name="FileName" DataType="text" DisplayName="Name"/> <PropertyDef Name="Description" DataType="text" DisplayName="Description"/> <PropertyDef Name="Title" DataType="text" DisplayName="Title"/> <PropertyDef Name="Author" DataType="text" DisplayName="Author"/> <PropertyDef Name="DocSubject" DataType="text" DisplayName="Subject"/> <PropertyDef Name="DocKeywords" DataType="text" DisplayName="Keywords"/> <PropertyDef Name="DocComments" DataType="text" DisplayName="Comments"/> <PropertyDef Name="CreatedBy" DataType="text" DisplayName="Created By"/> <PropertyDef Name="ModifiedBy" DataType="text" DisplayName="Last Modified By"/> <PropertyDef Name="EmployeeNumber" DataType="text" DisplayName="EmployeeNumber"/> <PropertyDef Name="EmployeeId" DataType="text" DisplayName="EmployeeId"/> <PropertyDef Name="EmployeeFirstName" DataType="text" DisplayName="EmployeeFirstName"/> <PropertyDef Name="EmployeeLastName" DataType="text" DisplayName="EmployeeLastName"/> </PropertyDefs> <ResultTypes> <ResultType DisplayName="Employee Document" Name="default"> <KeywordQuery/> <PropertyRef Name="EmployeeNumber" /> <PropertyRef Name="EmployeeId" /> <PropertyRef Name="EmployeeFirstName" /> <PropertyRef Name="EmployeeLastName" /> </ResultType> <ResultType DisplayName="All Results"> <KeywordQuery/> <PropertyRef Name="Author" /> <PropertyRef Name="Description" /> <PropertyRef Name="FileName" /> <PropertyRef Name="Size" /> <PropertyRef Name="Path" /> <PropertyRef Name="Write" /> <PropertyRef Name="CreatedBy" /> <PropertyRef Name="ModifiedBy" /> </ResultType> <ResultType DisplayName="Documents" Name="documents"> <KeywordQuery>IsDocument="True"</KeywordQuery> <PropertyRef Name="Author" /> <PropertyRef Name="DocComments"/> <PropertyRef Name="Description" /> <PropertyRef Name="DocKeywords"/> <PropertyRef Name="FileName" /> <PropertyRef Name="Size" /> <PropertyRef Name="DocSubject"/> <PropertyRef Name="Path" /> <PropertyRef Name="Write" /> <PropertyRef Name="CreatedBy" /> <PropertyRef Name="ModifiedBy" /> <PropertyRef Name="Title"/> </ResultType> <ResultType DisplayName="Word Documents" Name="worddocuments"> <KeywordQuery>FileExtension="doc" OR FileExtension="docx" OR FileExtension="dot" OR FileExtension="docm" OR FileExtension="odt"</KeywordQuery> <PropertyRef Name="Author" /> <PropertyRef Name="DocComments"/> <PropertyRef Name="Description" /> <PropertyRef Name="DocKeywords"/> <PropertyRef Name="FileName" /> <PropertyRef Name="Size" /> <PropertyRef Name="DocSubject"/> <PropertyRef Name="Path" /> <PropertyRef Name="Write" /> <PropertyRef Name="CreatedBy" /> <PropertyRef Name="ModifiedBy" /> <PropertyRef Name="Title"/> </ResultType> <ResultType DisplayName="Excel Documents" Name="exceldocuments"> <KeywordQuery>FileExtension="xls" OR FileExtension="xlsx" OR FileExtension="xlsm" OR FileExtension="xlsb" OR FileExtension="ods"</KeywordQuery> <PropertyRef Name="Author" /> <PropertyRef Name="DocComments"/> <PropertyRef Name="Description" /> <PropertyRef Name="DocKeywords"/> <PropertyRef Name="FileName" /> <PropertyRef Name="Size" /> <PropertyRef Name="DocSubject"/> <PropertyRef Name="Path" /> <PropertyRef Name="Write" /> <PropertyRef Name="CreatedBy" /> <PropertyRef Name="ModifiedBy" /> <PropertyRef Name="Title"/> </ResultType> <ResultType DisplayName="PowerPoint Presentations" Name="presentations"> <KeywordQuery>FileExtension="ppt" OR FileExtension="pptx" OR FileExtension="pptm" OR FileExtension="odp"</KeywordQuery> <PropertyRef Name="Author" /> <PropertyRef Name="DocComments"/> <PropertyRef Name="Description" /> <PropertyRef Name="DocKeywords"/> <PropertyRef Name="FileName" /> <PropertyRef Name="Size" /> <PropertyRef Name="DocSubject"/> <PropertyRef Name="Path" /> <PropertyRef Name="Write" /> <PropertyRef Name="CreatedBy" /> <PropertyRef Name="ModifiedBy" /> <PropertyRef Name="Title"/> </ResultType> </ResultTypes></root></Properties> </WebPart> ]]> </AllUsersWebPart> </File> 5.Deploy your custom solution and you will have a custom advanced search page.

Search Results

Search found 11959 results on 479 pages for 'multi module'.

Page 15/479 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >

- by Kenny Rasschaert

- by Rick Strahl

- by pablomo

- by Panoy

- by Hacker

- by ks78

- by StepTNT

- by mithaldu

- by isakkarlsson

- by MHundal

- by MHundal

- by CodeJoust

- by CoffeeMonster

- by viatropos

- by viatropos

- by Kratz

- by user28837

- by Hoang

- by cappuccino

- by ybbest

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >