Search Results

Search found 1395 results on 56 pages for 'repo'.

Page 15/56 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Mercurial "server"

  - by user85116

  I've been using mercurial for a little while, but mainly for my own usage. Now though, I have a project I'm working on where two of us are building the same project, and we will probably be modifiying each other's files. I would like to setup a mercurial repo on a server, make that repo the "server", so my changes and the other editor's changes both push to that server (so basically the subversion / cvs model); I like mercurial though, and don't want to switch to something like subversion. Here in my own network, everything is done on linux, and my "server" has openssh installed. So pushing my changes (I work on multiple computers) from one computer to the server is just a matter of "hg push"; the protocol used is ssh for transfering the changes. The problem is that I use linux, the server will be windows (so no openssh, right?) and the other editor will be using windows too. As far as I know, the best way of working in mercurial in these types of setups is for the repo to pull changes from the source, rather then the source pushing to the "server". I'm behind several firewall's (not entirely my network) and my computer won't be visible from the server, and I'm assuming the other editor will be behind a firewall too (so we can't just start up the local mercurial http server and get the "server" computer to pull from that). What's the best way for both editors to get our changes to the server repo? (I should add that the server is a server on the internet, so just as visible as something like google.com. It's a hosted windows server, but I would probably have permission to install software if needed for this)

  Read the article

• Mercurial on shared network drive?

  - by user1164199

  Right now I have my repo on my local drive. In order to back it up, I have to copy .hg to a window's network drive. At Is it a good idea to put Mercurial Repository in shared Network drive?, Lasse Karlsen said the repo shouldn't be on a shared folder on a network server because "mercurial cannot reliably hold locks in all situations". Would this still be an issue when the repository is only updated by a single user? If so, can someone explain to me why the corruption happens? A while back our IT had problem setting up a mercurial server. I am very fond of mercurial (it has a great interface and is very easy to work with), but if it's going to be such a pain in the neck to set up for multiple users, I am willing to look for something else. Does anyone have any suggestions (with reasons)? I am looking for a revision control program that has the following attributes: 2. Good interface (allow you to easily see revision and changes to the code over multiple revisions). 3. Work as a local repo or a network repo. 4. IT will feel comfortable installing on their network. Thanks, Stephen

  Read the article

• git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

  - by Ben

  I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

  Read the article

• git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

  - by Ben

  I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

  Read the article

• How to access git:// protocol from GitPython

  - by Owais Lone

  I am writing an app to manage git repos using the GitPython module. It works fine for my local repos but I can't get it to work with the git:// protocol. It takes my git://address-to-repo as a directory on my filesystem. Is there a way to initiate a connection with a remote git repo?

  Read the article

• How to solve "command not found" on Ubuntu bash shell?

  - by redcoder

  I am very new to Ubuntu, struggling to find the proper command to install Zend Server on my Ubuntu 9.10 Server. After downloading the ZF Server and extracting it, I try to run this command: install_zs.sh 5.3 This is the ls of the extracted ZF archive: install_zs.sh README upgrade_zs_php.sh zend.deb.repo zend.rpm.repo But it says command not found. Any idea?

  Read the article

• ubuntu bash shell

  - by redcoder

  hi, i am very new to ubuntu.... struggling to find the proper command to install Zend Server on my Ubuntu9.10 Server. After downloading the ZF Server and extracted, i try to run this command install_zs.sh 5.3 This is the ls of the extracted ZF archive install_zs.sh README upgrade_zs_php.sh zend.deb.repo zend.rpm.repo But it says command not found ... any idea ?

  Read the article

• redmine multitheaded

  - by Alex

  Our redmine server is not responding due to connecting it to a large repository. It has not crashed but it's just busy until it checks it out, or whatever redmine does when you set a new repo for a project. What is surprisning is that this operation is not running int the background but blocking the server. Is there any way to have redmine to this in the background next time we connect a large repo? Thanks

  Read the article

• How do I upgrade to PHP 5.4 in CentOS 6.3 with yum?

  - by Vicary

  I found some blog posts about this, but it's rather lack of descriptions on possible side effects. I could really use some detailed on these steps: How to add a repo that provides PHP 5.4 into yum Can this seamlessly replaces the current PHP version in CentOS? How can I switch back to the official repo when it supports PHP 5.4? (current 5.3.3 in my system) Will there be any potential to break PHP modules I currently using?

  Read the article

• graphical svn client for creating branches, merging branches etc?

  - by ajsie

  hi i wonder if there are some GUI softwares to administrate a svn repo? or do you actually have to log into the ubuntu server with ssh and use all the svn commands to copy the trunk to a branch, merge the data back and forth, copy to a tag, delete and so on... im using netbeans in mac. i think it's only handling the communication between a local project and the repo. not the flows between trunc, branch and tag (creating, deleting, viewing differences etc)

  Read the article

• How to undo an hg merge? (I think.)

  - by Grumdrig

  I'm new to collaborating with Mercurial. My situation: Another programmer changed rev 1 of a file to replace 4-space indents with 2-space indent. (I.e. changed every line.) Call that rev 2, pushed to the remote repo. I've committed substantive changes rev 1 with various code changes in my local workspace. Call that rev 3. I've hg pulled and hg mergeed without a clear idea of what was going on. The conflicts are myriad and not really substantive. So I really wish I'd changed my local repo to 2-space indents before merging; then the merge will be trivial (i'm supposing). But I can't seem to back up. I think I need to hg update -r 3 but it says abort: outstanding uncommitted merges. How can I undo the merge, changes spacing in my local repo, and remerge?

  Read the article

• Is it possible to generate dynamic proxy for static class or static method in C#?

  - by Jeffrey

  I am trying to come up with a way that (either static or instance) method calls can be intercepted by dynamic proxy. I want to implement it as c# extension methods but stuck on how to generate dynamic proxy for static methods. Some usages: Repository.GetAll<T>().CacheForMinutes(10); Repository.GetAll<T>().LogWhenErrorOccurs(); //or var repo = new Repository(); repo.GetAll<T>().CacheForMinutes(10); repo.GetAll<T>().LogWhenErrorOccurs(); I am open to any library (linfu, castle.dynamic proxy 2 or etc). Thanks!

  Read the article

• Organizing a project that uses multiple languages?

  - by calid

  I am currently working on a project that has components in perl, .NET, C/C++, and Java. These components are inter-related, but are not tied to the same release schedule. Due to the very different build/testing environment requirements, lumping them all in to the same /bin /src /lib /etc /tests hierarchy is a bit unwieldy. What are some good organizational hierarchies to use in source control when dealing with a project of this nature? I am currently leaning towards each language having its own branch: repo/project1/perl/main/... repo/project1/.NET/main/... repo/project1/Java/main/... How would your recommended hierarchy change if they DID have a tied release schedule?

  Read the article

• Trac: Changesets lost after changing SVN repository path

  - by synapse

  Last evening I did some housekeeping on our code repository - basically moved the code from /repo/trunk to /repo/projectname/trunk. I changed the repo path on my trac.ini - after which trac complained the repository needed to be resynced. So I ran: trac-admin /var/trac/projectname resync and all was well. Then I checked the changesets against the ticket and found that trac no longer has a link to show the code against changesets - says "No changeset XXX in repository". Has anyone here had the same issue they managed to solve? I need the broken links to the changeset fixed. Thank you

  Read the article

• Mercurial clone operation works, but I don't have write access

  - by normalocity

  Somewhere I did something silly. I was deploying my Rails app via cloning the Mercurial repo down onto my Ubuntu server. It worked the first time, and then...well, I made a small change on my dev machine, pushed the changes to the repo, and then deleted the copy on the Ubuntu server and re-cloned from the repo. The clone operation (the second, and third, and 'n' times) works without error, but I don't have write access to the files that were cloned. When I try to startup my mongrel - it can't create the /tmp folder, and because of no write access, fails to start the Rails app.

  Read the article

• Using Hive in a maven project

  - by Jason

  I have a project that I am migrating from ant to maven. The project makes use of a lightly-customized Hive build. I figured I would just import this build into our internal maven repo and list it as a dependency in the project's pom file. The problem I'm running into is that the Hive build just generates a bunch of jars in build/dist/lib. Some of these are the core Hive jars themselves and some are jars that Hive depends on. What's the best way to deal with these? Should I put all the core hive jars into our internal repo and just deal with undocumented dependencies in the new project's pom file? Or just jar up everything as a jar of jars and deploy that to the repo? Would that approach even work? Kind of a maven newbie still, thanks for any help.

  Read the article

• Git Specify Remote Source Durring Push

  - by ThinkBohemian

  I have a local git repository a "central" repo at github. I'm working on a part of a project, while a friend is working on a related piece that is its entirely seperate repo, is it possible for me to simply link directly to my friends repo? For example, the app is called widgets. I have all my code in widgets/app/mycode and my friend is writing code that goes into widgets/plugins/awesome/hiscode. I want to be able to always have http://github.com/mycode/widgets/plugins/hiscode to be a direct link or clone to http://github.com/hiscode/awesome ? It could be possible i'm missing something basic in my question or knowledge of git, if so please ask, and i'll be happy to try to fill in the blanks.

  Read the article

• Git remote has master but no HEAD

  - by dwynne

  I'm new to Git, so I suspect that I'm misunderstanding something here, but I'll ask anyway. Via TortoiseGit I do the following: Init a new Git repo locally Add a readme file to it and commit Add a new remote Push the new repo to the orgin (remote) If I then Browse Refs I see the following: heads/master remotes/origin/master What I find odd is that I don't see a HEAD on the remotes. If I delete my local repo and then clone it from the server (I just pushed to above) and then browse the refs I see: heads/master remotes/origin/HEAD remotes/origin/master So why don't I see a remote head after the initial push? NB. I've done the same via Git Bash command (ie. not Tortoise Git) and am seeing the same thing.

  Read the article

• git: having 2 push/pull repos in sync (or 1 push/pull and 1 pull in sync)

  - by xavjuan

  Hello, We work on multiple geographically seperate sites. Today I have our git clones all live on one site A. Then users from site B have to ssh over to do a git clone or to push in changes. These are bare repos where the update is through pushes. Ideally, for git clone/push performance, I'd like to limit having to go over ssh. I'd like to have a copy of git repo X live on site A and site B... and have some syncing mechanism between them. OR to have X live on both sites, but only allow pushing to A (and have that setup correctly at clone time on B) I'm worried about the case where someone on site A pushes changes to the repo at site A at the same time that someone on site B pushes a truely conflicting change to the repo at site B. Is there some 'sync'ing solution built into git for distributed open repos like this? Or a way to have a clone from X set the origin/parent to the X from the other site? thanks, -John

  Read the article

• Using 'git pull' vs 'git checkout -f' for website deployment

  - by Michelle

  I've found two common approaches to automatically deploying website updates using a bare remote repo. The first requires that the repo is cloned into the document root of the webserver and in the post-update hook a git pull is used. cd /srv/www/siteA/ || exit unset GIT_DIR git pull hub master The second approach adds a 'detached work tree' to the bare repository. The post-receive hook uses git checkout -f to replicate the repository's HEAD into the work directory which is the webservers document root i.e. GIT_WORK_TREE=/srv/www/siteA/ git checkout -f The first approach has the advantage that changes made in the websites working directory can be committed and pushed back to the bare repo (however files should not be updated on the live server). The second approach has the advantage that the git directory is not within the document root but this is easily solved using htaccess. Is one method objectively better than the other in terms of best practice? What other advantages and disadvantages am I missing?

  Read the article

• Tortoisesvn not showing up correct status after commit

  - by Michael

  Hi, I was going to ask this in tigris.org, however they have maintenance in their forum. My environment: Windows 7 x64, Tortoisesvn latest x64, simple repo. What I'm doing: I am adding a new file to repo, then doing SVN Commit. This operation is successful and I can see it in repo from trac or directly. I expect: To see that file's icon as green checkmark. What I have: I see blue PLUS icon, like I haven't done commit. However, if I just create any new file in that folder(without any commit or update), the icon is immediately changing to checkmark. What a magic! I don't expect here anyone to have answer, this might be a bug, but who knows )) Cheers!

  Read the article

• Can I undo the last git push?

  - by Stray

  A team member accidentally pushed half a gig of unwanted zips to the remote repo last night when they were in a rush. Yes... oops. Nobody has pulled or committed since. Ideally I want to just 'undo' what happened. I have looked at filter-branch and was thinking of trying something like git filter-branch --tree-filter 'rm -f *.zip' HEAD but that would be local, and I can't figure out how to do it direct on the remote repo. Is there a simpler way to undo what happened? If she amends her last commit and pushes again will that undo the push - ie actually remove those files from the history? Obviously if she deletes them, commits and pushes again then that still leaves the content in the repo, which is no good.

  Read the article

• Convert SVN Subdirectory to Git

  - by magneticMonster

  I would like to ditch SVN for Git. My current SVN repository setup has projects under trunk (/trunk/projecta, /trunk/projectb, etc. with tags and branches at /tags/projecta-1.0, etc.). I would like to create distinct Git repos for each of these projects by pulling them out of SVN using git-svn. I've successfully pulled the entire SVN repo down to a local Git repo but all of the projects exist in the same Git repo now. Is it possible to pull them apart at this point?

  Read the article

• Git Use Remote Source Durring Push

  - by ThinkBohemian

  I have a local git repository a "central" repo at github. I'm working on a part of a project, while a friend is working on a related piece that is its entirely seperate repo, is it possible for me to simply link directly to my friends repo? For example, the app is called widgets. I have all my code in widgets/app/mycode and my friend is writing code that goes into widgets/plugins/awesome/hiscode. I want to be able to always have http://github.com/mycode/widgets/plugins/hiscode to be a direct link or clone to http://github.com/hiscode/awesome ? It could be possible i'm missing something basic in my question or knowledge of git, if so please ask, and i'll be happy to try to fill in the blanks. I am deploying to my production site via capistrano, so maybe a script of some kind may be easier?? I don't know (that's why i'm posting)!!

  Read the article

• How to rebase one Git repository onto another one?

  - by kroimon

  Hi there! I had one Git repository (A) which contains the development of a project until a certain point. Then I lost the USB stick this repo A was on. Luckily I had a backup of the latest commit, so I could create a new repository (B) later where I imported the latest project's state and continue development. Now I recovered that lost USB stick, so I have two Git repositories. I think I just have to rebase repo B onto repo A somehow, but I have no idea how to do that, maybe using fetch/pull and rebase? Thanks in advance for your help!

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >