Search Results

Search found 1123 results on 45 pages for 'rev samuel'.

Page 15/45 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >

Trouble with 12.10 lag

- by Brennan

Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

Read the article
Dynamic Bind9 + DHCP

- by AcidRod75

i have been working on setup a server for my internal network, so far i have a working isc-dhcp-server that can upgrade a chrooted BIND9 (on the same machine), i need to add some static entries on the DNS, so users can resolve the websites that resides in our DMZ. What i had tryed all ready was to modify the /etc/bind/named.conf.local with this info: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret "MySuperSecretHash"; (this is not the real value BTW) }; zone "quality.internal" IN { type master; file "/var/lib/bind/quality.internal.db"; allow-update { key DHCP_UPDATER; }; }; zone "0.10.10.in-addr.arpa" { type master; file "/var/lib/bind/rev.10.10.0.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; }; logging { channel query.log { file "/var/log/named/query.log"; severity debug 3; }; category queries { query.log; }; }; --- EOF ---- then i added this 2 entries: zone "ourserver.internal" IN { type master; file "/var/lib/bind/ourserver.internal.db"; }; zone "0.16.172.in-addr.arpa" { type master; file "/var/lib/bind/rev.172.16.0.in-addr.arpa"; }; ---- EOF ---- So.. i created the files ourserver.internal.db and rev.172.16.0.in-addr.arpa placed them BOTH in /var/lib/bind/ and changed the permisions so the bind user can access them, restated the service... when i do a NSLOOKUP www.ourserver.internal i get: Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find www.ourserver.internal: NXDOMAIN BUT when i do a reverse lookup.... Server: 127.0.0.1 Address: 127.0.0.1#53 5.0.16.172.in-addr.arpa name = www.ourserver.internal I do not understand what's wrong. Some help with this will save me from installing a new DNS server at the DMZ JUST to host internal site names- TY in advance BTW: the server i'm using has Ubuntu Server 11.10 fully patched.

Read the article
video/audio output via HDMI Ubuntu 12.04

- by lostNfound

I've been out of the Ubuntu loop for quite a while now and have a completely new laptop now. Just installed Ubuntu 12.04 64-bit and would like to output my video and my audio via HDMI to my television. the following is the lspci | grep VGA for my computer. please tell me if there is any additional information needed and preferably how to obtain it and i will be more than happy to oblige. thank you in advance for your time and assistance in this matter. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) Edit: every time i restart my computer, after a short moment, i get an error message stating something along the lines "sorry, jockey needed to close unexpectedly." after researching, i discovered jockey is the name of the "additional drivers," which after initial installation, ubuntu informed me of proprietary drivers available. those are no longer available, and this error continues to occur.

Read the article
Wireless always disconnect

- by Silas

I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

Read the article
Wireless Not Working with Drivers Installed

- by Haoran

I'm new to Linux. I installed Ubuntu 12.10 on my old Compaq/Hp Preario V3000 to replace Windows XP. Every thing works fine except I'm getting no wireless network options in the network drop down menu. I'm using a cable at the moment. Wirless chipset is: 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02) I ran rfkill: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no I also ran iwconfig and got this lo no wireless extensions. eth0 no wireless extensions. In the additional drivers it says: "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary)" Any help to resolve the problem would be greatly appreciated.

Read the article
Freezes if desktop effects is used [closed]

- by munir

I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

Read the article
Why doesn't Unity 3D work on my HD3000 integrated graphics?

- by Zatsugami

So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

Read the article
ubuntu 13.10 secondary monitor - doesn't redraw properly

- by Daniel

Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

Read the article
gt 555m instead of gt540m

- by gangov

Im gonna be really short. My Acer Aspire 5755G lap top has a Nvidia geforce gt 540m. But when i start lspci | grep VGA it shows me the following: ^[[Agangov@gangov-Aspire-5755G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M] (rev a1) Im really not familiar with the additional drivers in ubuntu. Can somebody tell me what should i do you my VGA properly?? Thank you in advance.

Read the article
Fan working non-stop on a Dell Inspiron 5110

- by cankemik

First of all i'm new at ubuntu. I've only tried 11.10 before 12.04. Since then my notebook's(Dell Insprion 5110) fan was working non-stop. And also battery lasts in 2 hours. So i made a research. Some said it's about graphics card driver. I've tried so many things, so many codes but i get no result. I must say that i've tried ironhide and bumblebee. non of them worked 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff)

Read the article
How to get wireless and wired network working again on my Dell Inspiron 1501?

- by Angelo Daul

My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

Read the article
How to disable VGA

- by Bitmap

If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

Read the article
The blogs I turn upto…

- by DAXShekhar

I turn around the pages of Following blogs Satya Srikant (who is also my brother ;)) http://geekswithblogs.net/ssmantha/Default.aspx Kamal http://kamalblogs.wordpress.com Prabhat Samuel http://geekswithblogs.net/Prabhats/Default.aspx Vanya Kashperuk http://kashperuk.blogspot.com/ Mfp’s two cents http://blogs.msdn.com/mfp/ ……. more to add to list … ;)

Read the article
Book Review: SSIS Design Patterns

- by andyleonard

Samuel Vanga ( Blog | @SamuelVanga ) has posted a review of our new book SSIS Design Patterns at his blog . Several of Sam’s statements struck me, but none more than this: Within a few hours of reading SQL Server 2012 Integration Services Design Patterns , it stood out that none of the authors were trying to impress by showing what they all know in SSIS. Instead, they focused on describing solutions and patterns in a great detail (exactly why I paid for). Sam mentions he could not locate the source...(read more)

Read the article
DNS configuration issues. Clients inside network unable to resolve DNS server's name

- by hydroparadise

Setup the DNS service on Ubuntu 12.04 64 and all apears to be well except that my dhcp clients do not recognize my DNS servers hostname. When doing a nslookup on one of my Windows clients, I get C:\Users\chad>nslookup Default Server: UnKnown Address: 192.168.1.2 Where I would expect the FQDN in the spot where UnKnown is seen. The DNS server know's itself pretty well, but I think only because I have an entry in the /etc/hosts file to resolve. There's so many places to look I don't even know where to begin. Are there any logs I can look at? Something. Places I've looked at and configured: /etc/bind/zones/domain.com.db /etc/bind/zones/rev.1.168.192.in-addr.arpa /etc/bind/named.conf.local EDIT: '/etc/bind/zones/rev.1.168.192.in-addr.arpa' @ IN SOA dns-serv1.mydomain.com [email protected]. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS dns-serv1.mydomain.com. 2 IN PTR dns-serv1 2 IN PTR mydomain.com EDIT 2: '/etc/bind/named.conf.local' zone "mydomain.com" { type master; file "/etc/bind/zones/mydomain.com.db"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };

Read the article
Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

- by Matthew Watson

Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

Read the article
foswiki: hide some topic info when editing in WYSWYG mode.

- by Mica

I have a FOSWiki installation with a bunch of Topic templates already defined. the problem is, when a user selects the topic, they are presented with a bunch of extra information that they should not edit, and should not even see really. Is there a way to hide this content in the WYSWYG editor? Example: The topic template looks like this:         Header 1 foo etc. etc. etc  And when the user selects the topic template, they get all that in the WYSWYG editor. I would like to hide all that so when the user selects the topic template, they get Header 1 foo etc etc etc Without any of the other mark-up.

Read the article
Disappeared graphics card

- by lenovo user

I have a Lenovo T520 with two graphics cards, an nVidia quadro and an intel graphics card. I'm running a Ubuntu and Windows 7 dual boot. I can no longer find any trace of my intel graphics card. In my linux boot: > lspci | grep VGA > 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) In Windows in control panel display- advanced settings, I only see the NVIDIA Quadro 2000M. In the BIOS there is no mention of the intel graphics card, no where I can find to try and turn it on or off. I thought I was going crazy, but then I found a post I made on ask ubuntu I made 3 months ago where I listed the output of lspci on this same machine: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) What is going on? How could my intel graphics card have been disabled or turned off somehow without my knowledge? I've been in the BIOS 3 times now, each time convinced the last time I must have missed something, but I always find nothing. Am I missing something there? Could a thief have opened my computer and stolen my graphics card?

Read the article
Linux boot - stop the kernel switching to a new framebuffer mode clearing output

- by Avio

I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

Read the article
Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

- by Biohazard

I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

Read the article
send variable fancybox onclick event

- by samuel saul

hi, i want to send href value. but its not working. function display () { $.fancybox({ 'href': 'index.php', 'width' : '75%', 'height' : '75%', 'autoScale' : false, 'transitionIn' : 'none', 'transitionOut' : 'none', 'type' : 'iframe' }); } i tryed this : function display (who) { $.fancybox({ 'href': 'index.php'+who, 'width' : '75%', 'height' : '75%', 'autoScale' : false, 'transitionIn' : 'none', 'transitionOut' : 'none', 'type' : 'iframe' }); } <a onclick="javascript:display("?id=11");" href="#" >create</a> this onclick event inside the innerhtml so its not working with '' why

Read the article
Mercurial extensions not working in Windows 7 x64?

- by Samuel Meacham

We are test driving Mercurial at work. We don't want to have to enter our user/pass each time we interact with a repository, so we set up the mercurial_keyring extension. We: Installed Python 2.6.5 (32 or 64 bit, depending on the system) Installed setuptools (for easy_install.exe) easy_install keyring easy_install mercurial_keyring And then made the appropriate changes to %userprofile%/mercurial.ini in the [auth] section. It works fine on my colleague's computer (32bit xp sp3), but it does not work on my machine (Windows 7 Ultimate x64). Also noteworthy, the setuptools had to be built from source on Win 7 x64 (python setup.py bdist_wininst, then run the resulting setuptools-0.6c11.win-amd64.exe). Using just hg.exe from the Mercurial 1.5 binary installation (the .msi), I get this error when I run hg.exe: * failed to import extension mercurial_keyring: No module named mercurial_keyring I tried to change my mercurial.ini, to specify the path to the mercurial_keyring.py file, instead of having mercurial find it (since it's in the PYTHONPATH). Old: [extensions] mercurial_keyring = New: [extensions] mercurial_keyring = c:/mercurial/extensions/mercurial_keyring.py The error changes to: abort: could not import module keyring! So while providing the path to the mercurial_keyring extension works, the dependent keyring module still cannot be found. After further investigation, it appears that NO extensions work. They all produce the error: * failed to import extension [extension name]: No module named [module name] It appears that when running hg.exe, it is not aware of PYTHONPATH. I have tried: Python 2.6.5 32 bit Python 2.6.5 64 bit Building Mercurial 1.5 from source with MinGW Building Mercurial 1.5 from source with MSVC9 Using hg.exe from the 1.5 binary dist (.msi) Using the hg.py in c:\python26\scripts when building from source Various configurations in %userprofile%/mercurial.ini Using setuptools (easy_install.exe) to install keyring and mercurial_keyring Building keyring and mercurial_keyring from source (python setup.py bdist_wininst) Nothing works. The closest I've got is using hg.py when building from source. It at least doesn't give me errors, and actually creates %userprofile%/wincrypto_pass.cfg when I enter my credentials. But on subsequent requests, it doesn't enter the credentials automatically. It prompts me for them again. Interestingly, TortoiseHG is using the keyring. I just can't get it to work on the command line. I think something is going on with Win 7 x64 that is preventing mercurial (hg.exe) from seeing the PYTHONPATH, so it can't find any of the installed modules. Does anyone have extensions working in Win 7 x64? Specifically with the binary installation of mercurial (not hg.py)?

Read the article
Webkit iPhone App : How to dynamically change the user zoom (or scale, pich & zoom) in the viewport

- by Samuel Michelot

I use JQTouch for an iPhone app. JQtouch disable by default the possibility to pinch&zoom the page. For one page (containing a big image), i need to enable the pinch & zoom feature. This is easy : var viewport = $("head meta[name=viewport]"); viewport.attr('content', 'width=320, initial-scale=1, maximum-scale=10.0, minimum-scale=1, user-scalable=1'); But after user has play with the pinch & zoom, I need to dynamically reset the zoom (scale) to the default. I tried to reset the viewport: viewport.attr('content', 'width=320, initial-scale=1.0, maximum-scale=1.0, user-scalable=0;'); After calling the above code, it's not possible to zoom anymore (because of user-scalable=0;), but it doesn't change the current scale to the default. I am looking for something like setScale(1), or to change an attribute like current-scale=1 Any idea ?

Read the article
Java enums: Gathering info from another enums

- by Samuel Carrijo

I made a similar question a few days ago, but now I have new requirements, and new challenges =). As usual, I'm using the animal enums for didactic purposes, once I don't want to explain domain-specific stuff I have a basic enum of animals, which is used by the whole zoo (I can add stuff to it, but must keep compatibility): public enum Animal { DOG, ELEPHANT, WHALE, SHRIMP, BIRD, GIRAFFE; } I need to categorize them in a few, non-related categories, like gray animals (whale (my whale is gray) and elephant), small animals (bird, shrimp and dog), sea animals (whale and shrimp). I could, as suggested in my previous questions, add a lot of booleans, like isGray, isSmall and isFromSea, but I'd like an approach where I could keep this somewhere else (so my enum doesn't need to know much). Something like: public enum Animal { DOG, ELEPHANT, WHALE, SHRIMP, BIRD, GIRAFFE; public boolean isGray() { // What comes here? } } Somewhere else public enum GrayAnimal { WHALE, ELEPHANT; } How is this possible? Am I requesting too much from Java?

Read the article
naming conventions for buttons in user interface

- by Samuel

User interface for web applications in general contain various buttons for performing CRUD operations. What would be the suggested naming convention for button labels while performing the following actions.. User creation (Add User... or Add User or Add user) Event creation (Add Event... or Add Event or Add event) View users button (List All Users or List All users or List all users ) Most of the sites seem to contain the last option (e.g. Add user) where the first alphabet in the word is capitalized and rest all are lower case). What would be a better practice here?

Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >