Search Results

Search found 1238 results on 50 pages for 'sam saffron'.

Page 15/50 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

  - by Sam

  I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

  Read the article

• How do you configuring vlans/trunk on a Cicso ASA 5510

  - by Sam Sanders

  I have a Cicso ASA 5510 that I want to connect to 2 Dell PowerConnect 5500 linked in a Switch Stack. I want to connect a trunking line to each switch so if one switch dies the other works. The problem is I can't seem to do anything thing with vlans on the 5510 using the "Cisco ASDM 6.4 for ASA" . Do I need to use CLI for this, or is it just not possible? I'm new at networking so any advice would be helpful.

  Read the article

• How to blacklist a problem wifi access point by MAC address in OSX

  - by Sam Alexander

  So I am a small mac-user cog in a larger windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wifi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my Airport on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• Unable to establish remote access to workplace pc windows 7

  - by sam

  I am successfully connected to my workplace via vpn. But when I try to connect to my pc via remote desktop it keep asking for credentials even I am providing the right one. This works fine in windows xp but unable to connect using win 7. Also after establishing a vpn I lost my internet access. Any idea.

  Read the article

• Set up DNS or F5 VIP to send traffic to a specific port

  - by Sam

  I have a clustered SQL instance set up at SERVER01\dev08 It's assigned to a static port of 1466. Can I set up something which will let users connect to SERVER01 and hit that port? If this is possible, what problems might it create (all traffic coming to this name hitting only one port)? It seems that DNS has nothing to do with ports - nor does the F5 big IP.

  Read the article

• SNMP based network discovery (switches), device (ports on switches) power management

  - by SaM

  In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

  Read the article

• Tomato OS: "memory exhausted" running vi .... how to solve?

  - by Sam Jones

  I have set up tomato (shibby) on an asus RT-N66U router. It works great. I loaded up a few pieces, like transmission and optware. I can run vi, but when I run vi it fails with a "memory exhausted" error, and the terminal session hangs. For reference: If I simply start "vi" it runs fine. But if I specify vi I get the memory exhausted error, even if the file I am opening is just a couple of hundred bytes in size (like fstab). I discovered that my swap partition was not properly set up, so I did that. The swapon command now indicates I really do have a swap: [root@MyRouter samba]$ swapon -s Filename Type Size Used Priority /dev/sda1 partition 32900860 0 1 How can I get vi to work? Thanks! System setup reference information: asus RT-N66U router 2TB usb hard drive partitions on hard drive: Disk /dev/sda: 2000.4 GB, 2000398839808 bytes 255 heads, 63 sectors/track, 30400 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Disk identifier: 0xfacbc8ab Device Boot Start End Blocks Id System /dev/sda1 1 512 32900868 82 Linux swap / Solaris /dev/sda2 513 29000 1830638880 83 Linux running samba memory: $ cat /proc/meminfo MemTotal: 255840 kB MemFree: 210980 kB Buffers: 5264 kB Cached: 22768 kB SwapCached: 0 kB Active: 20272 kB Inactive: 11448 kB HighTotal: 131072 kB HighFree: 99868 kB LowTotal: 124768 kB LowFree: 111112 kB SwapTotal: 32900860 kB SwapFree: 32900860 kB Dirty: 0 kB Writeback: 0 kB TIA!

  Read the article

• Ubuntu whois package and request limits

  - by Sam Hammamy

  I'm writing a django app with a form that accepts an IP and does a whois lookup on the discovered domain names. I've found the Ubuntu package whois which I plan to call from a python subprocess, and read the stdout into a StringIO, then parse for things like Registrar, Name Servers, etc. My question is, it seems that there are many paid whois services, which means that there must be a reason why people don't just use this Ubuntu package. I'm wondering if there's a request limit on the number of requests from a single IP to the package's whois server? I will probably be making 250 domain lookups per IP or maybe more. Also, I've found that some domains aren't searchable: qmul.ac.uk is searchable kat.ph is not searchable ahram.org.eg is not searchable Any particular reason for that?

  Read the article

• How do I permanently set my bashrc changes?

  - by Sam

  Everytime I log into SSH, I have to manually source the bashrc file to set my path variables the way I want to. How do I have bash do it automatically? Shouldn't it be automatic?

  Read the article

• Server high memory usage at same time every day

  - by Sam Parmenter

  Right, we moved one of our main sites onto a new AWS box with plenty of grunt as it would allow us more control that we had before and future proof ourselves. About a month ago we started running into issues with high memory usage at the same time every day. In the morning an export is run to export data to a file which is the FTPed to a local machine for processing. The issues were co-inciding with the rough time of the export but when we didn't run the export one day, the server still ran into the same issues. The export has been run at other times in the day since to monitor memory usage to see if it spikes. The conclusion is that the export is fine and barely touches the sides memory wise. No noticeable change in memory usage. When the issue happens, its effect is to kill mysql and require us to restart the process. We think it might be a mysql memory issue, but might just be that mysql is just the first to feel it. Looking at the logs there is no particular query run before the memory usage hits 90%. When it strikes at about 9:20am, the memory usage spikes from a near constant 25% to 98% and very quickly kills mysql to save itself. It usually takes about 3-4 minutes to die. There are no cron jobs running at that time of the day and we haven't noticed a spike in traffic over the period of the issues. Any help would be massively appreciated! thanks.

  Read the article

• SQL Server Rights to backup drive

  - by Sam

  I'm trying to copy a backup I've made from one server to another using either an SSIS or Powershell step in a job. I've run into the same error on both systems when running the step under the sql agent. I receive errors that the path does not exist. I've tried granting the agent rights to e:\backups, where the file is located, but it still doesn't work. When I use a proxy for the step, it works fine. Can anyone help me with what permissions to grant to sqlagent? Rights look to have been granted to MSSQL$Instance1 on the backup drive.

  Read the article

• Make IE stop asking me to install adobe flash player

  - by Sam

  I don't have adobe flash player installed, and don't miss the flashing ads a bit. The only thing that annoys me: IE8 keeps asking me "this web site wants to install Adobe Flash Player", and I want to get rid of this question. I don't want to install it, not now, not ever. So how do I make IE stop asking me about it?

  Read the article

• Authenticating Mountain Lion over Ubuntu 12 LDAP [closed]

  - by Sam Hammamy

  Possible Duplicate: Ubuntu OpenLDAP and Mac OS X Roaming Profiles I've installed slapd on Ubuntu 12 after a long long day of trial and error. I've added the apple.ldif schema, and the samba.ldif schema, plus a test user. Last week, I had installed slapd on Ubuntu 11, and was able to authenticate against it from OS X Lion after finding the following blog post: Fixing OpenLDAP Authentication on OS X Lion This suggests running the following commands to fix the authentication problem /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string CRAM-MD5" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string NTLM" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string GSSAPI" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist However, I ran these commands on OS X Mountain Lion, and I am still unable to authenticate. I can't even use the Directory Editor app to examine the AD. I am however able to bind to the server via python-ldap's ldap.simple_bind_s('cn=admin,dc=foo,dc=net,'secret'). The error I am getting when trying to use Director Editor is Error Code (5000)

  Read the article

• using monit to restart custom daemon

  - by Jenis Sam

  I wrote a php daemon using system daemon pear class. How do I use monit to restart it when it fails? I have the following code in my monit config file: check process merge with pidfile /var/www/merge/merge.pid group 1000 start program = "/etc/init.d/merge start" stop program = "/etc/init.d/merge stop" IF CHANGED PID then restart My goal is solely if the daemon fails (stops running because of an error), I want monit to make it start running again.

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

• How do I tell Apache which PHP to use?

  - by Sam McAfee

  I am running Apache2 on a Mac OS X (10.5). I just compiled PHP 5.2.8 and finally got pdo-mysql working (or so I think). My command line "php --version" is showing 5.2.8 and I have the right modules installed. But, when do a phpinfo(), Apache dumps out PHP 5.2.6 (my earlier version, without pdo_mysql). How do I tell Apache which PHP to load? The httpd.conf has the line: LoadModule php5_module libexec/apache2/libphp5.so But, I don't know what or where that is. Is that what I have to change?

  Read the article

• vista wireless adapter not working

  - by Sam Adams

  After this script gets called http://blogs.technet.com/b/heyscriptingguy/archive/2008/09/29/how-can-i-enable-or-disable-my-network-adapter.aspx 50 times over a 12 hour span, disabling wireless/enabling wired, followed by enabling wireless/disabling wired, the wireless adapter stops finding connections entirely, even if it is enabled, needing a reboot. vista, powershell 1.0 (for some reason vista is not accepting powershell 2 for an update), 32 bit, intel R pro /wireless 3945ABG adapter. Any reasons why, thanks.

  Read the article

• Locating memory leak in Apache httpd process, PHP/Doctrine-based application

  - by Sam

  I have a PHP application using these components: Apache 2.2.3-31 on Centos 5.4 PHP 5.2.10 Xdebug 2.0.5 with Remote Debugging enabled APC 3.0.19 Doctrine ORM for PHP 1.2.1 using Query Caching and Results Caching via APC MySQL 5.0.77 using Query Caching I've noticed that when I start up Apache, I eventually end up 10 child processes. As time goes on, each process will grow in memory until each one approaches 10% of available memory, which begins to slow the server to a crawl since together they grow to take up 100% of memory. Here is a snapshot of my top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1471 apache 16 0 626m 201m 18m S 0.0 10.2 1:11.02 httpd 1470 apache 16 0 622m 198m 18m S 0.0 10.1 1:14.49 httpd 1469 apache 16 0 619m 197m 18m S 0.0 10.0 1:11.98 httpd 1462 apache 18 0 622m 197m 18m S 0.0 10.0 1:11.27 httpd 1460 apache 15 0 622m 195m 18m S 0.0 10.0 1:12.73 httpd 1459 apache 16 0 618m 191m 18m S 0.0 9.7 1:13.00 httpd 1461 apache 18 0 616m 190m 18m S 0.0 9.7 1:14.09 httpd 1468 apache 18 0 613m 190m 18m S 0.0 9.7 1:12.67 httpd 7919 apache 18 0 116m 75m 15m S 0.0 3.8 0:19.86 httpd 9486 apache 16 0 97.7m 56m 14m S 0.0 2.9 0:13.51 httpd I have no long-running scripts (they all terminate eventually, the longest being maybe 2 minutes long), and I am working under the assumption that once each script terminates, the memory it uses gets deallocated. (Maybe someone can correct me on that). My hunch is that it could be APC, since it stores data between requests, but at the same time, it seems weird that it would store data inside the httpd process. How can I track down which part of my app is causing the memory leak? What tools can I use to see how the memory usage is growing inside the httpd process and what is contributing to it?

  Read the article

• Can't add service account to domain group during SQL cluster install

  - by Sam

  I'm installing a 2008 instance on a Server 2003 machine which is already running SQL 2005. I need to set up domain groups for the security setup step: http://msdn.microsoft.com/en-us/library/ms179530.aspx On Windows Server 2003, specify domain groups for SQL Server services. All resource permissions are controlled by domain-level groups that include SQL Server service accounts as group members. Much more info on this here: http://support.microsoft.com/kb/910708 I've had problems with being able to add the windows service accounts to the groups at install time. The security admins had to make my account a domain admin - which they were hesitant to do. The account under which SQL Server Setup is running must have permissions to add accounts to the domain groups. Is there a specific security setting which would allow my account to add accounts to a group? UPDATE: I'm looking for specific instructions. I have a global group called domain\servicegroup - what do I tell the security folks to do. I'd love to figure it out myself, but I don't have access to this stuff.

  Read the article

• Why Is Web Sharing Broken on My Mac?

  - by Sam Murray-Sutton

  Background: I use my Mac for web development, running copies of web sites locally. I recently installed the Snow Leopard update, which to all intents and purposes seems to have gone fine, except... What's not working? Web-sharing; more specifically I can't turn it on via preferences. The preference pane just hangs when I try to. So Apache doesn't start on reboot. I can start Apache by hand, but I don't know enough to either setup apache to start with the computer, or to properly fix web sharing. Further details My Apache error log shows nothing on when the system boots up (as I would expect). This is the error message when I try to start web sharing from the sharing preference pane. 28/09/2009 10:58:05 System Preferences[834] setInetDServiceEnabled failed with 1 for org.apache.httpd Here's the messages given when I start apache from the command line. [Mon Sep 28 10:35:53 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Mon Sep 28 10:35:54 2009] [warn] mod_bonjour: Skipping user 'sams' - index file /Users/sams/Sites/index.html has zero length. [Mon Sep 28 10:35:54 2009] [notice] Digest: generating secret for digest authentication ... [Mon Sep 28 10:35:54 2009] [notice] Digest: done [Mon Sep 28 10:35:54 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 Phusion_Passenger/2.2.5 configured -- resuming normal operations Please let me know if you need any further details on this. Any help would be greatly appreciated. UPDATE I have added an answer of my own below - I was able to solve it thanks to being pointed in the right direction by the comments below, so thanks very much. But I'm still not totally clear as to what caused the problem or how my solution addressed it, so I'm leaving the question open for now.

  Read the article

• Best option for storage clustering

  - by sam

  I'm working on an application that requires a large amount of storage space and I want to handle storage 'in-house' (Much cheaper than, say, S3) so we will have multiple servers (Initially 4) with large amounts of storage (6TB each). The storage will need to be very flexible and configurable, each piece of data should be replicated on at least 2 servers and must be easily readable/writable from ether an API of a UNIX device/file/folder like a normal drive, I don't mind which. We must also be able to easily offload content to our HTTP CDN (Edgecast), it doesn't need to have built in HTTP support but if it doesn't I'm going to have to write something to get the files onto HTTP so they can be pulled by the CDN. I've looked at a lot of solutions including Eucalyptus Walrus OpenStack Object Storage MogileFS and some others which I can't remember All the servers will be running RHEL 6, they have 4x1.5TB drives which will be RAID1'd into a single partition. All the servers have 1GB/s connections between them and 100MB/s connections to the internet with unlimited bandwidth. They have 2x2.66ghz processors. I understand there isn't a single, perfect answer but it would be nice to get some pointers.

  Read the article

• Look up and string operation; fetch a value based on searching a partial string

  - by Sam

  I have 2 sets of data. One set to be filled up by fetching relevant data from a data array. DATA to be FILLED: Part#1 Part#2 ------ ------- 4021006 3808587 3870480 3083410 3873905 3890030 4002065 3699803 3930218 ARRAY OF DATA: Part#1 Part#2 ------ ------- 4021006;3808587 1 3808587 2 3870480;3083410;4002065 3 3083410 34 3873905 54 3890030 32 4002065;3930218 65 3699803 75 3930218 68 I need to match Part#1 and find Part#2. EXPECTED OUTPUT Part#1 Part#2 ------ ------- 4021006 1 3808587 1;2 3870480 3 3083410 3;4 3873905 54 3890030 32 4002065 3;65 3699803 75 3930218 65;68 Can anyone help.

  Read the article

• Stop yahoo from opeing in second tab when opening chrome

  - by sam

  I recently downloaded Vuze (torrent client), which as well as installing, installs a whole bunch of rubbish toolbars (mostly by an outfit called 'Spigot') and tries to change your default search engine to Yahoo. In Safari and Firefox, ive managed to change it back but i Chrome although ive deleted all the addons and restored my default search engine when ever i open up Chrome i get two tabs 1) my default homepage and 2) yahoo search page. Any idea were i can disable this Yahoo search page, ive looked in the settings but could find any where obvious (ive set back my default search engine to Google and deleted any add ons) but this still dosnt do it.. any ideas ? My last resort is to do a factory reset of Chrome, which i dont want to do as i have all my settings in there.

  Read the article

• SQL Full-Text indexing not populating

  - by Sam

  Hi, We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

  Read the article

• How long should diskpart take?

  - by sam

  I am using diskpart to extend a drive that is actually a VHD. I've already extended the VHD. It's on Windows 2003 and the C drive doesn't contain the swap file and the available space is contiguous. However didn't see the Note about the Resource Kit diskpart for download is not for Windows 2003. So I did the extend using the Windows 2000 version. Not sure if this is the reason but Diskpart is sitting there now for about 15 minutes or so and it's only gotta extend by 10GB. Should it be taking this long? Am I asking for trouble now that I've used a Windows 2000 version of diskpart on a Windows 2003 machine (VM)?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >