Search Results

Search found 872 results on 35 pages for 'sd dracula'.

Page 15/35 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Wireless internet is connected to an open network but has no internet

  - by Joshua Reeder

  I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• Prevent full table scan for query with multiple where clauses

  - by Dave Jarvis

  A while ago I posted a message about optimizing a query in MySQL. I have since ported the data and query to PostgreSQL, but now PostgreSQL has the same problem. The solution in MySQL was to force the optimizer to not optimize using STRAIGHT_JOIN. PostgreSQL offers no such option. Here is the explain: Here is the query: SELECT avg(d.amount) AS amount, y.year FROM station s, station_district sd, year_ref y, month_ref m, daily d LEFT JOIN city c ON c.id = 10663 WHERE -- Find all the stations within a specific unit radius ... -- 6371.009 * SQRT( POW(RADIANS(c.latitude_decimal - s.latitude_decimal), 2) + (COS(RADIANS(c.latitude_decimal + s.latitude_decimal) / 2) * POW(RADIANS(c.longitude_decimal - s.longitude_decimal), 2)) ) <= 50 AND -- Ignore stations outside the given elevations -- s.elevation BETWEEN 0 AND 2000 AND sd.id = s.station_district_id AND -- Gather all known years for that station ... -- y.station_district_id = sd.id AND -- The data before 1900 is shaky; insufficient after 2009. -- y.year BETWEEN 1980 AND 2000 AND -- Filtered by all known months ... -- m.year_ref_id = y.id AND m.month = 12 AND -- Whittled down by category ... -- m.category_id = '001' AND -- Into the valid daily climate data. -- m.id = d.month_ref_id AND d.daily_flag_id <> 'M' GROUP BY y.year It appears as though PostgreSQL is looking at the DAILY table first, which is simply not the right way to go about this query as there are nearly 300 million rows. How do I force PostgreSQL to start at the CITY table? Thank you!

  Read the article

• Android : Bitmap save to location

  - by Chrispix

  I am working on a function to download an image from a web server, redisplay it on the screen, and if the user wishes to keep the image, save it on the SD card in a certain folder. Is there an easy way to take a bitmap and just save it to the SD card in a folder of my choice? My issue is that I can download the image, display it on screen as a Bitmap. The only way I have been able to find to save an image to a particular folder is to use FileOutputStream, but that requires a byte array. I am not sure how to convert (if this is even the right way) from Bitmap to byte array, so I can use a Fileoutput stream to write the data. The other option I have is it use MediaStore : MediaStore.Images.Media.insertImage(getContentResolver(), bm, barcodeNumber + ".jpg Card Image", barcodeNumber + ".jpg Card Image"); Which works fine to save to SD card, but does not allow you to customize the folder. Any assistance would be very much appreciated. Thank you in advance.

  Read the article

• Android, how to use DexClassLoader to dynamically replace an Activity or Service

  - by RickNotFred

  I am trying to do something similar to this stackoverflow posting. What I want to do is to read the definition of an activity or service from the SD card. To avoid manifest permission issues, I create a shell version of this activity in the .apk, but try to replace it with an activity of the same name residing on the SD card at run time. Unfortunately, I am able to load the activity class definition from the SD card using DexClassLoader, but the original class definition is the one that is executed. Is there a way to specify that the new class definition replaces the old one, or any suggestions on avoiding the manifest permission issues without actually providing the needed activity in the package? The code sample: ClassLoader cl = new DexClassLoader("/sdcard/mypath/My.apk", getFilesDir().getAbsolutePath(), null, MainActivity.class.getClassLoader()); try { Class<?> c = cl.loadClass("com.android.my.path.to.a.loaded.activity"); Intent i = new Intent(getBaseContext(), c); startActivity(i); } catch (Exception e) { Intead of launching the com.android.my.path.to.a.loaded.activity specified in /sdcard/mypath/My.apk, it launches the activity statically loaded into the project.

  Read the article

• Why does my laptop resume immediately after suspend?

  - by Igor Zinov'yev

  I seem to be having some problem with suspend mode. Every time I try to suspend my laptop, it just locks the screen. Or maybe it successfully suspends just to resume only an instant after. What could cause such a behaviour? I'm running 32-bit Ubuntu 12.04 with the 3.2.0-25 kernel on a HP dv5-1178er Pavilion laptop (Intel Core 2 Duo). Here are the relevant log sections: kern.log: Jun 1 10:42:21 igor-laptop kernel: [ 2225.131171] PM: Syncing filesystems ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.141222] PM: Preparing system for mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.141239] Freezing user space processes ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.156171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.172139] PM: Entering mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.172169] Suspending console(s) (use no_console_suspend to debug) Jun 1 10:42:21 igor-laptop kernel: [ 2225.172895] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 1 10:42:21 igor-laptop kernel: [ 2225.181767] sd 0:0:0:0: [sda] Stopping disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.251089] ene_ir 00:0a: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251115] i8042 aux 00:09: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251133] i8042 kbd 00:08: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251286] jmb38x_ms 0000:06:00.3: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.252491] sdhci-pci 0000:06:00.1: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264130] uhci_hcd 0000:00:1d.2: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264142] uhci_hcd 0000:00:1d.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264325] uhci_hcd 0000:00:1a.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288059] uhci_hcd 0000:00:1a.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288097] uhci_hcd 0000:00:1d.3: PCI INT C disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288135] uhci_hcd 0000:00:1d.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316051] ehci_hcd 0000:00:1d.7: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316068] ehci_hcd 0000:00:1a.7: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.522872] PM: suspend of drv:sd dev:0:0:0:0 complete after 349.979 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522901] PM: suspend of drv:scsi dev:target0:0:0 complete after 349.955 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522927] PM: suspend of drv:scsi dev:host0 complete after 272.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522969] ahci 0000:00:1f.2: BIOS update required for suspend/resume Jun 1 10:42:21 igor-laptop kernel: [ 2225.522976] pci_legacy_suspend(): ahci_pci_device_suspend+0x0/0x80 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522981] pm_op(): pci_pm_suspend+0x0/0x110 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522984] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 258.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522987] PM: Device 0000:00:1f.2 failed to suspend async: error -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.576228] snd_hda_intel 0000:00:1b.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.576270] ACPI handle has no context! Jun 1 10:42:21 igor-laptop kernel: [ 2225.592136] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 327.889 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.592206] PM: Some devices failed to suspend Jun 1 10:42:21 igor-laptop kernel: [ 2225.592291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592298] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592325] usb usb3: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592339] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592345] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592371] usb usb4: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592387] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592395] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592843] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592851] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592854] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592863] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592878] usb usb5: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592892] usb usb6: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592895] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592903] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592906] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592915] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592930] usb usb7: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592946] usb usb8: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592949] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592957] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592963] pci 0000:00:1e.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.597106] sd 0:0:0:0: [sda] Starting disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.608138] snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xdf300000-0xdf303fff 64bit] (PCI address [0xdf300000-0xdf303fff]) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608180] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608233] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608248] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608299] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608420] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X Jun 1 10:42:21 igor-laptop kernel: [ 2225.612095] firewire_ohci 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612181] sdhci-pci 0000:06:00.1: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612211] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612225] sdhci-pci 0000:06:00.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612296] jmb38x_ms 0000:06:00.3: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612326] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612332] jmb38x_ms 0000:06:00.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.699170] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 101.965 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699179] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 101.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699186] PM: resume of drv: dev:ep_00 complete after 101.917 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699197] PM: resume of drv: dev:ep_83 complete after 101.972 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716148] PM: resume of drv:hub dev:3-0:1.0 complete after 119.543 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716155] PM: resume of drv: dev:ep_00 complete after 119.544 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716161] PM: resume of drv:hub dev:5-0:1.0 complete after 119.420 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716168] PM: resume of drv: dev:ep_00 complete after 119.381 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716174] PM: resume of drv:hub dev:8-0:1.0 complete after 119.141 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716181] PM: resume of drv: dev:ep_00 complete after 119.104 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716186] PM: resume of drv: dev:ep_81 complete after 119.579 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716191] PM: resume of drv: dev:ep_81 complete after 119.427 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716197] PM: resume of drv: dev:ep_81 complete after 119.143 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.747148] firewire_core: skipped bus generations, destroying all nodes Jun 1 10:42:21 igor-laptop kernel: [ 2225.776093] PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 167.225 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.777243] i8042 kbd 00:08: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.777278] ene_ir 00:0a: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.820100] PM: resume of drv:hub dev:4-0:1.0 complete after 223.436 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820115] PM: resume of drv: dev:ep_00 complete after 223.444 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820123] PM: resume of drv: dev:ep_81 complete after 223.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820206] PM: resume of drv:hub dev:7-0:1.0 complete after 223.266 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820221] PM: resume of drv: dev:ep_81 complete after 223.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820238] PM: resume of drv: dev:ep_00 complete after 223.255 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820295] PM: resume of drv:hub dev:6-0:1.0 complete after 223.453 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820302] PM: resume of drv: dev:ep_00 complete after 223.415 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820321] PM: resume of drv: dev:ep_81 complete after 223.457 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.932108] usb 4-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.086714] PM: resume of drv:usbhid dev:4-2:1.0 complete after 489.393 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086728] PM: resume of drv: dev:ep_81 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086745] PM: resume of drv: dev:ep_00 complete after 489.329 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086753] PM: resume of drv:usbhid dev:4-2:1.1 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086764] PM: resume of drv: dev:ep_82 complete after 489.373 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.180555] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.244858] firewire_core: rediscovered device fw0 Jun 1 10:42:21 igor-laptop kernel: [ 2226.335066] btusb 7-2:1.0: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.335068] btusb 7-2:1.1: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.432082] usb 6-1: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.578280] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 985.301 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584296] PM: resume of drv:usb dev:7-2:1.0 complete after 986.693 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584308] PM: resume of drv: dev:ep_00 complete after 986.452 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584311] PM: resume of drv:usb dev:7-2:1.1 complete after 986.616 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584315] PM: resume of drv:usb dev:7-2:1.3 complete after 986.483 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584320] PM: resume of drv:usb dev:7-2:1.2 complete after 986.556 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584328] PM: resume of drv: dev:ep_03 complete after 986.588 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584331] PM: resume of drv: dev:ep_81 complete after 986.704 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584334] PM: resume of drv: dev:ep_83 complete after 986.617 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584337] PM: resume of drv: dev:ep_82 complete after 986.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584340] PM: resume of drv: dev:ep_02 complete after 986.667 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584344] PM: resume of drv: dev:ep_84 complete after 986.558 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584352] PM: resume of drv: dev:ep_04 complete after 986.542 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590883] PM: resume of drv: dev:ep_00 complete after 993.327 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590887] PM: resume of drv:usb dev:6-1:1.0 complete after 993.424 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590927] PM: resume of drv: dev:ep_82 complete after 993.395 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590934] PM: resume of drv: dev:ep_81 complete after 993.426 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590940] PM: resume of drv: dev:ep_01 complete after 993.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592450] PM: resume of drv:sd dev:0:0:0:0 complete after 995.343 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592461] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 802.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592472] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 995.324 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.600339] PM: resume of devices complete after 1008.129 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.601293] PM: resume devices took 1.008 seconds Jun 1 10:42:21 igor-laptop kernel: [ 2226.601330] PM: Finishing wakeup. Jun 1 10:42:21 igor-laptop kernel: [ 2226.601332] Restarting tasks ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2226.625660] video LNXVIDEO:01: Restoring backlight state Jun 1 10:42:22 igor-laptop kernel: [ 2227.478921] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S Jun 1 10:42:22 igor-laptop kernel: [ 2227.481981] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 Jun 1 10:42:22 igor-laptop kernel: [ 2227.527727] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 1 10:42:22 igor-laptop kernel: [ 2227.532468] r8169 0000:03:00.0: eth0: link down Jun 1 10:42:22 igor-laptop kernel: [ 2227.533967] ADDRCONF(NETDEV_UP): eth0: link is not ready pm_suspend.log: Fri Jun 1 10:42:14 MSK 2012: Running hooks for suspend. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux igor-laptop 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:33:05 UTC 2012 i686 i686 i386 GNU/Linux Module Size Used by pci_stub 12550 1 vboxpci 22882 0 vboxnetadp 13328 0 vboxnetflt 27211 0 vboxdrv 252189 3 vboxpci,vboxnetadp,vboxnetflt dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 arc4 12473 2 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi rfcomm 38139 12 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec bnep 17830 2 btusb 17912 2 bluetooth 158438 23 rfcomm,bnep,btusb joydev 17393 0 parport_pc 32114 0 snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ppdev 12849 0 uvcvideo 67203 0 binfmt_misc 17292 1 videodev 86588 1 uvcvideo snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi nvidia 10958194 43 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 psmouse 87213 0 ir_rc5_decoder 12459 0 serio_raw 13027 0 iwlwifi 287934 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir mac80211 436455 1 iwlwifi snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 178679 2 iwlwifi,mac80211 hp_accel 25728 0 lis3lv02d 19268 1 hp_accel input_polldev 13648 1 lis3lv02d mac_hid 13077 0 wmi 18744 1 hp_wmi jmb38x_ms 17406 0 soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm memstick 15857 1 jmb38x_ms firewire_sbp2 18346 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp vesafb 13516 1 usbhid 41906 0 hid 77367 1 usbhid firewire_ohci 40180 0 firewire_core 56906 2 firewire_sbp2,firewire_ohci crc_itu_t 12627 1 firewire_core sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci r8169 56321 0 video 19068 0 total used free shared buffers cached Mem: 3095544 2364260 731284 0 159020 1280240 -/+ buffers/cache: 925000 2170544 Swap: 1718916 0 1718916 /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success. Running hook /etc/pm/sleep.d/10_grub-common suspend suspend: /etc/pm/sleep.d/10_grub-common suspend suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: Having NetworkManager put all interaces to sleep...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend: /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend: /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: stop: Unknown instance: /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend: /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: nVidia binary video drive detected, not using quirks. /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0 /usr/lib/pm-utils/sleep.d/99video suspend suspend: success. Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success. Fri Jun 1 10:42:19 MSK 2012: performing suspend Fri Jun 1 10:42:21 MSK 2012: Awake. Fri Jun 1 10:42:21 MSK 2012: Running hooks for resume Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend: /etc/pm/sleep.d/novatel_3g_suspend resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend: /usr/lib/pm-utils/sleep.d/99video resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend: /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend: /usr/lib/pm-utils/sleep.d/95anacron resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend: /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend: Reloaded unloaded modules. /usr/lib/pm-utils/sleep.d/75modules resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: Having NetworkManager wake interfaces back up...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success. Running hook /etc/pm/sleep.d/10_grub-common resume suspend: /etc/pm/sleep.d/10_grub-common resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend: /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend: /usr/lib/pm-utils/sleep.d/00logging resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success. Fri Jun 1 10:42:22 MSK 2012: Finished.

  Read the article

• high load average, high wait, dmesg raid error messages (debian nfs server)

  - by John Stumbles

  Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

  Read the article

• RAID5 over LVM on Ubuntu Server 12.04.3

  - by April Ethereal

  I'm trying to create a RAID5 software array using LVM. I use VirtualBox as I'm only learning how LVM works. So I've created 4 virtual SCSI drives and then did the following: pvcreate /dev/sd[b-e] vgcreate /dev/sd[b-e] raid5_vg lvcreate --type raid5 -i 3 -L 1G -n raid_lv raid5_vg However, I get an error after the last command: WARNING: Unrecognised segment type raid5 Using default stripesize 64.00 KiB Rounding size (256 extents) up to stripe boundary size (258 extents) Cannot update volume group raid5_vg with unknown segments in it! So it looks like raid5 is not a valid segment type. "lvm segtypes" also doesn't contain 'raid5' entry: root@ubuntu-lvm:~# lvm segtypes striped zero error free snapshot mirror So my question is - how could I create RAID5 logical volume using LVM only? It seems that it is possible, I saw a few references (not for Ubuntu, unfortunately) for RedHat and Gentoo systems. I don't want to use mdadm for now, until I find out that it is mandatory. Some info about my system is below: root@ubuntu-lvm:~# uname -a Linux ubuntu-lvm 3.8.0I use Ubuntu Server 12.04.3 (i686)-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 15:31:16 UTC 2013 i686 i686 i386 GNU/Linux root@ubuntu-lvm:~# dpkg -l | grep lvm ii lvm2 2.02.66-4ubuntu7.3 The Linux Logical Volume Manager Thanks.

  Read the article

• How can I transfer files to a Kindle Fire with a Micro-USB cable?

  - by Jeff

  I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

  Read the article

• Performance problem with an Intel Wireless 5100

  - by Piet

  I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Best Way to Archive Digital Photos and Avoid Duplicate File Names

  - by user31575

  This problem pertains to archiving of digital pictures taken from multiple cameras. Answers here covered the general topic of the-mechanics-of-backups: How do you archive digital photos and videos ? I however face another problem. Having multiple cameras (canon) and multiple SD cards (mixed and matched at random), I have found that different SD cards have different photos with the same file name, i.e. two different photos each name IMG_3141.JPG. Additionally, for better or worse, I've backed up the files to multiple places and need to consolidate my backups. I want to eliminate duplicates, but not clobber files. The only way I can think of is to append the code (md5 or sha1) to the file name, i.e. IMG_3141.JPG becomes IMG_3141_KT229QZ31415926ASDF.JPG, then sorting them out Any better ways? (Note "open letter" address the 'duplicate file name' concern): http://photofocus.com/2010/09/13/an-open-letter-to-digital-camera-manufacturers-regarding-camera-file-naming/ )

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• USB Mouse and Keyboard not working in Linux 4 Tegra

  - by Sijo

  I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

  Read the article

• mdadm raid5 recover double disk failure - with a twist (drive order)

  - by Peter Bos

  Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

  Read the article

• Ubuntu 12.04 taking too much time to boot

  - by adarshdinesh

  Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• How can a usb be detected but not show up anywhere?

  - by George Mauer

  I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

  Read the article

• HTC Android device mounted as USB drive is read-only unless I'm root

  - by Ian Dickinson

  When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Is there anything like a link or shared mount point for FAT32 folders in Linux/Android?

  - by endolith

  I often want the same files to be accessed by different apps on my Android phone, but the apps look in different folders. Is there a way to make two different folder paths on a FAT SD card point to the same file? For EXT, I think I could do this with a symbolic or hard link, but those don't exist for FAT. Can FAT be extended to support them? Can Android use an EXT-formatted SD card? Can a folder be mounted on top of another folder? If this does exist, does it have any negative side effects?

  Read the article

• RHEL raw device (over VMware RDM) performance issues

  - by jifa

  I'm running RHEL 5.3 over vSphere 4.0U1. I configured multiple LUNs on my NetApp (Fibre) storage, and added the RDM on two (Linux) VMs, using the Paravirtual SCSI adapter. One LUN is 100GB in size, successfully mapped to /dev/sdb on both VMs, 5 more are 500MB in size (mapped to /dev/sd{c-g}. I also created one partition per device. I have encountered two issues: First, writing directly to /dev/sdb1 gives me ~50MB/s, while any of the /dev/sd{c-g}1 gives me ~9MB/s. There is no difference in configuration of the LUNs apart from their size. I am wondering what causes this but this is not my main problem, as I would settle for 9 MB/s. I created raw devices using udev pretty straightforwardly: ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N" per device Writing to any of the new raw devices dramatically slows down performance to just over 900KB/s. Can anyone point me in a helpful direction? Thanks in advance, -- jifa

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >