Search Results

Search found 607 results on 25 pages for 'tb'.

Page 15/25 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• Kubuntu 11.10 very slow during file I/O

  - by dko

  After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

  Read the article

• No space left on disk

  - by Ned

  folks. I'm trying to copy/move files to an external 1 TB hard drive with about 50 GB remaining space. I receive a "no space left on disk" when I try. I've moved files off and retried, but still get the same message. Disk Usage Analyzer, Properties, and freeware Treesize all report available hard drive space of about 50 GB. I've tried df -i (50 GB available) and df -k, with the latter reporting only 1% of inode usage. I've been able to save files from Firefox to the drive also. I can't even rename files without getting the message. Yesterday in the midst of trying to figure this out I tried to move 4 files to the drive and got the message. Today, I found them on the drive. What's up with that? (That's the only time that has happened to my knowledge.) Is this an ubuntu problem? or is my hard drive just about to fail because of something like a controller problem? Any thoughts would be appreciated.

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• How Do You Stress-Test Your Hard Drives?

  - by MetaHyperBolic

  When looking for large new drives (= 1 TB) on newegg and the like, I note a number of reviews talking about drives being either D.O.A. or hitting the Click of Death (or even releasing the Magic Smoke) within a week or so of use. A portion of the reviews mention this phenomenon whether the drive in question is Western Digital or Hitachi or whatever. For those of you using Windows, what do you to: 1) Place a large initial stress on the drive to see if it can take it? For how long? 2) Test the drive afterwards (presumably with some sort of S.M.A.R.T. tool or others) to see if any negative changes have been noted? Note: This is one component of a larger plan for both high-availability and backups for my home data.

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• Is it possible to FORMAT an external hard disk that has been encrypted using Storagecrypt?

  - by Pandian John

  Basically the big problem is that about 680 GB of data from my Seagate 2 TB Ext HD is lost because I was experimenting with a software called storagecrypt. I used it a few months ago and today I tried it again but i didn't know that the old password is already set in the hard disk when I pressed the encrypt button. I forgot the password which is disappointing. Not to mention that software uses 128 bit AES encryption so there is no way iam going to recover that data. My question is that is it possible to Format my Hard disk which has been encrypted? What i mean is that is it possible to completely wipe the data just like it is newly bought so that I can use my External Hard disk?( I tried to format by right click-- Format. But the size of the disk is shown as 1 MB. Answers would be very much appreciated. Thanks.

  Read the article

• What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

  - by jonathanconway

  I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• Repartition hard drive using Mac OS X, keep existing data

  - by Jonny

  I got a 1 TB disk a year or so ago and loaded it with some hundred of GB of data. I somehow neglected to check the file system, which turns out to be FAT-32 and thus too small for files bigger than 4 GB. So now I want to change it, without deleting the data. I thought I'd just make a new partition in the so far unused space. Then with the new partition, copy/move the data into the new partition, and then delete the old FAT-32 partition, and make the new partition bigger again... or just make a few more partitions. The critical step here is, can I make that new partition without ruining the data? The data should be fairly sequentially added to the start of the disk, but what do I know... so that's why I'm asking. Can I safely use Disk Utility for this? Any recommended file system?

  Read the article

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• Is it bad to have a very full hard drive on a high traffic database server?

  - by MikeN

  Running an Ubuntu server with MySQL for a high traffic production database server. Nothing else is running on the machine except the MySQL instance. We store daily database backups on the DB server, is there any performance hit or reason why we should keep the hard disk relatively empty? If the disk is filled up to 86%+ with the database and all of the backups, does it hurt performance at all? So would the DB server running with 86-90%+ full capacity perform less well in any way than the server running with only a 10% full disk? The total disk size on the server is over 1 TB so even 10% of the disk should be enough for basic O/S swapping and such.

  Read the article

• Deployment from OVA format

  - by Manvendra Bele

  I am deploying a VM using a OVA format. The size of OVA format is 57 GB. Currently free space on my datastore is 388 GB. At the time of selecting Disk Format type if shows me in red that the disk size required is 1 TB therefore you cannot select THICK provisioning. Therefore, i selected THIN provisiong. It THIN provisioing i am showed that Estimated Disk Usage is 112 GB which is less than the free space available. But even after selecting THIN proviosing at the time of deployment it throws an error that it cannot create disk as the size of disk is larger than the maximum specified limit. My block size is of 1 MB. Pasting my exact error here: Failed to deploy OVF package:File [datastore1] IMS Tester 1/IMS Tester1_2.vmdk is larger than maximum size supported by datastore 'datastore1

  Read the article

• Should I use VFAT or ext3 for a 1Tb external usb hard drive?

  - by ihuston

  I have a 1 Tb USB external hard drive which I want to use to backup data from my home and office desktops (both running Linux). Should I format the drive (possibly split into a few partitions) as vfat or ext3? I don't anticipate using the drive with Windows very often so this is not a primary concern. The main thing holding me back from just using ext3 is the problems you can have when two different users (home and work accounts) try to access each others data. Is there any way to mount an ext3 drive with user id mapping?

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• There is a way to change the SkyDrive default path in Windows 8.1?

  - by RobsonROX

  The deeper integration with SkyDrive is truly beneficial, but my laptop has a somewhat small primary drive (an 128 Gb MSATA SSD), and when possible, i try to move installations and other folders(like Documents and Downloads) to the secondary, 1 Tb drive. But i couldn't find any option to change the SkyDrive folder (it used to be in the secondary drive prior to the upgrade). Anyone have some idea how to change it? Thanks in advance! Edit 1: I've looked for an option to change this folder, to no avail. Really, it could only be a problem if i choose the option to keep my files offline, but it is exactly the option that i was looking for. Edit 2: Trying to install the old desktop app, the installer just quits silently.

  Read the article

• Can't Read/Write the Hard disk used in NAS

  - by mgpyone

  I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

  Read the article

• How small can/should I make my partitions?

  - by Pureferret

  My machine is currently split into 3 user partitions (plus however many Windows and Linux have decided to slyly create) Which are C: Windows 7, D: Data, and E(?): Ubuntu. I'm considering wiping my Windows 7 Install (stupid Skyrim not installing) and restructuring the way my machine operates. I want the partitions for the Windows and Linux install to be as small as possible while still able to function well, and be able to install games on my Windows C: drive. I then want to link from both Win7 and Linux drives to the middle D drive so that the in built My Documents (and etc on windows) folder and my Home folder (linux) share a common location, rather than my current situation which is 3 separate file locations. Something like this: I have 1 TB to play with and I want to know the 'best' sizes to make these partitions when I reinstall Windows (which I need to do anyway) and re-jig everything.

  Read the article

• Velvet screen after grub selection

  - by Spleen

  After a fresh install of Ubuntu 11.10 64-bit, the boot seems to stop after selecting the ubuntu option (same with the rescue one) in the grub menu. At first I thought this was related to grub-efi, as I've had similar problems after a Ubuntu 11.04 update which replaced grub-efi with grub-pc and got me stuck on a "elf magic" grub console (https://bugs.launchpad.net/ubuntu/+source/apt/+bug/800910). While the 11.04 problem was resolved with a simple chroot and apt-get install from the live cd, that solution doesn't work this time. The drive with the bootloader is a sata3 ssd with 64 gb gpt (sdb1 20 mb efi boot partition fat16, sdb2 60 gb root ext4 and sdb3 4 gb swap) on a msi e350ia-e45 mainboard with a pair of 2 TB ext4 mbr drives for photos/music/movies. I've tried a few grub-install/update-grub with boot-directory sdb1 from chroot, but I cant seem to go anywhere. Even this guide: http://en.gentoo-wiki.com/wiki/Grub2#EFI (ofc I replaced grub2 with grub in the grub-install and efibootmgr commands) doesnt seem to get me anywhere. Any help or ideas are appeciated ;) edit: I guess its the combination of gpt/uefi that also seems to haunt f16 edit: same with 12.04 beta btw

  Read the article

• Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

  - by C-Blu

  After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

  Read the article

• Copying a large directory tree locally? cp or rsync?

  - by Rory

  I have to copy a large directory tree, about 1.8 TB. It's all local. Out of habit I'd use rsync, however I wonder if there's much point, and if I should rather use cp. I'm worried about permissions and uid/gid, since they have to be preserved in the clopy (I know rsync does this). As well as thinks like symlinks. The destination is empty, so I don't have to worry about conditionally updating some files. It's all local disk access, so I don't have to worry about ssh or network. The reason I'd be tempted away from rsync, is because rsync might do more than I need. rsync checksums files. I don't need that, and am concerned that it might take longer than cp. So what do you reckon, rsync or cp?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >