Search Results

Search found 127612 results on 5105 pages for 'why some links appear in a new tab'.

Page 15/5105 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

  - by user38085

  I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

  Read the article

• moving to a new dedicated server and need advice on the new setup

  - by Eric Martin

  I currently have a dedicated server that we have outgrown and we are moving to another server. Our current setup was a 8gb W2008R2 server running a W2008R2 IIS virtual machine using VMWare. We are moving to a 2 cpu 24 gb server with W2012 R2 on Hyper-V. On our virtual machine we are running iis 7.5 and sql server. Sql Server seems to want to eat up all the memory so I had to cap it at 2gb, which doesn't seem sufficient. My question is, when I move the virtual machine to the new server, should I create 2 virtual machines, one for sql server and one for IIS? Or should I leave them both on the same virtual machine? Or even, put the Sql Server on the dedicated server and run the IIS in the vm? I'd like some input on how this should be done, I've not got the experience needed to make the right call. Thanks!

  Read the article

• Switch or a Dictionary when assigning to new object

  - by KChaloux

  Recently, I've come to prefer mapping 1-1 relationships using Dictionaries instead of Switch statements. I find it to be a little faster to write and easier to mentally process. Unfortunately, when mapping to a new instance of an object, I don't want to define it like this: var fooDict = new Dictionary<int, IBigObject>() { { 0, new Foo() }, // Creates an instance of Foo { 1, new Bar() }, // Creates an instance of Bar { 2, new Baz() } // Creates an instance of Baz } var quux = fooDict[0]; // quux references Foo Given that construct, I've wasted CPU cycles and memory creating 3 objects, doing whatever their constructors might contain, and only ended up using one of them. I also believe that mapping other objects to fooDict[0] in this case will cause them to reference the same thing, rather than creating a new instance of Foo as intended. A solution would be to use a lambda instead: var fooDict = new Dictionary<int, Func<IBigObject>>() { { 0, () => new Foo() }, // Returns a new instance of Foo when invoked { 1, () => new Bar() }, // Ditto Bar { 2, () => new Baz() } // Ditto Baz } var quux = fooDict[0](); // equivalent to saying 'var quux = new Foo();' Is this getting to a point where it's too confusing? It's easy to miss that () on the end. Or is mapping to a function/expression a fairly common practice? The alternative would be to use a switch: IBigObject quux; switch(someInt) { case 0: quux = new Foo(); break; case 1: quux = new Bar(); break; case 2: quux = new Baz(); break; } Which invocation is more acceptable? Dictionary, for faster lookups and fewer keywords (case and break) Switch: More commonly found in code, doesn't require the use of a Func< object for indirection.

  Read the article

• Hiring New IT Employees versus Promoting Internally for IT Positions

  Recently I was asked my opinion regarding the hiring of IT professionals in regards to the option of hiring new IT employees versus promoting internally for IT positions. After thinking a little more about this question regarding staffing, specifically pertaining to promoting internally verses new employees; I think my answer to this question is that it truly depends on the situation. However, in most cases I would side with promoting internally. The key factors in this decision should be based on a company/department’s current values, culture, attitude, and existing priorities.  For example if a company values retaining all of its hard earned business knowledge then they would tend to promote existing employees internal over hiring a new employee. Moreover, the company will have to pay to train an existing employee to learn a new technology and the learning curve for some technologies can be very steep. Conversely, if a company values new technologies and technical proficiency over business knowledge then a company would tend to hire new employees because they may already have experience with a technology that the company is planning on using. In this scenario, the company would have to take on the additional overhead of allowing a new employee to learn how the business operates prior to them being fully effective. To illustrate my points above let us look at contractor that builds in ground pools for example.  He has the option to hire employees that are very strong but use small shovels to dig, or employees weak in physical strength but use large shovels to dig. Which employee should the contractor use to dig a hole for a new in ground pool? If we compare the possible candidates for this job we will find that they are very similar to hiring someone internally verses a new hire. The first example represents the existing workers that are very strong regarding the understanding how the business operates and the reasons why in a specific manner. However this employee could be potentially weaker than an outsider pertaining to specific technologies and would need some time to build their technical prowess for a new position much like the strong worker upgrading their shovels in order to remove more dirt at once when digging. The other employee is very similar to hiring a new person that may already have the large shovel but will need to increase their strength in order to use the shovel properly and efficiently so that they can move a maximum amount of dirt in a minimal amount of time. This can be compared to new employ learning how a business operates before they can be fully functional and integrated in the company/department. Another key factor in this dilemma pertains to existing employee and their passion for their work, their ability to accept new responsibility when given, and the willingness to take on responsibilities when they see a need in the business. As much as possible should be considered in this decision down to the mood of the team, the quality of existing staff, learning cure for both technology and business, and the potential side effects of the existing staff.  In addition, there are many more consideration based on the current team/department/companies culture and mood. There are several factors that need to be considered when promoting an individual or hiring new blood for a team. They both can provide great benefits as well as create controversy to a group. Personally, staffing especially in the IT world is like building a large scale system in that all of the components and modules must fit together and preform as one cohesive system in the same way a team must come together using their individually acquired skills so that they can work as one team.  If a module is out of place or is nonexistent then the rest of the team will suffer until the all of its issues are addressed and resolved. Benefits of Promoting Internally Internal promotions give employees a reason to constantly upgrade their technology, business, and communication skills if they want to further their career Employees can control their own destiny based on personal desires Employee already knows how the business operates Companies can save money by promoting internally because the initial overhead of allowing new hires to learn how a company operates is very expensive Newly promoted employees can assist in training their replacements while transitioning to their new role within a company. Existing employees already have a proven track record in regards fitting in with the business culture; this is always an unknown with all new hires Benefits of a New Hire New employees can energize and excite existing employees New employees can bring new ideas and advancements in technology New employees can offer a different perspective on existing issues based on their past experience. As you can see the decision to promote an existing employee from within a company verses hiring a new person should be based on several factors that should ultimately place the business in the best possible situation for the immediate and long term future. How would you handle this situation? Would you hire a new employee or promote from within?

  Read the article

• IIS 5 default website (Stopped) after new install on new box

  - by unknown (yahoo)

  We just got new boxes at work. Running Xp, IIs 5.1 (yeah I know corporate decision, not mine) when I go look at inetmgr (iis) the default website it stopped. if restarted, I get an error that it didn't respond in a timely manor I ran netstat -an, and -o and saw nothing had port 80 open. cleared my event viewer, restarted iis and restarted iisadmin service (and theirby smtp) no errors in the event log. I ran aspnet_regiis -i jsut in case. Still no joy. I'm stumped. Can any think of anything else to try? Thanks, E-

  Read the article

• How do I resolve "conflicting accounts" in google apps without breaking links to online photos on picasa?

  - by lee

  I have been using google apps for some time, and only recently learned I have what google calls "conflicting accounts" which is creating a problem I haven't been able to resolve. Turns out that the apps account really only covers email, google docs, and the calendar and not other features like picasa, blogger, youtube etc. and at some point they gave me a non-apps google account with my same (proprietary non-gmail) email address for the additional apps. This is the "conflicting account." I had noticed that I sometimes had to come in through another door when I went back and forth, between docs, picasa, and mail let's say, but never understood why since it was the same username and password and I didn't get any communication about it at the time. Google is now in the process of giving google apps users access to the additional apps and providing instructions for consolidating the two accounts. But if I want to move my picasa site into the new apps structure I have to download my albums and re-synch them. This would be disastrous for me as I have hundreds of photos embedded in my websites, and new web addresses would break all the connections. The alternative seems to be to rename my "personal" (non-apps) accounts as described at http://www.google.com/support/a/bin/answer.py?answer=185186: Users with conflicting Google Accounts can easily resolve their conflicts by renaming their personal Google Accounts, and the data in their personal accounts will remain safe and accessible to them. Here’s how a user can rename their personal Google Account: * Step 1: Visit www.google.com/accounts and sign in with your personal Google Account * Step 2: Click ‘Change email’ under ‘Personal Settings’ * Step 3: Enter a different email address where you can receive mail, enter your password, and click ‘Save email address’ * Step 4: Check your other email If your users don’t have different email addresses where they can receive mail, they can resolve the conflict by renaming their personal Google Accounts to @gmail.com addresses instead. Sounds easy enough, right? I gave them a gmail address. The wizard said "sorry you can't use a gmail account for this" --which contradicts the last paragraph above but ok, I switched to a new email address I just created for one of my domains. I can send email back and forth between this account and my google apps account with no problem. But when I try to use it as a replacement on the "personal" side I always get "The password you gave is incorrect." I have tried it over and over and know the password is correct. Since I like to get all my emails though one web interface I initially had the new email set up as an add-on to my google apps email account, but noting that the instructions said the "personal account" email could not be associated with any other gmail account I took it off and went back to accessing it via horde so there would be no conflict there, which seemed to make no difference. I can't figure out why it won't accept the password. Does anyone have any thoughts about that? or suggestions for another way to resolve my picasa problem? any help at all is greatly appreciated. Lee

  Read the article

• new with exception with Microsoft

  - by wsd

  As I'm coding for both Windows and Linux, I have a whole host of problems. Microsoft Visual C++ has no stdint header, but for that I wrote my own. Now I found out that MS C++'s new operator does not throw an exception, so I want to fix this a quickly as possible. I know I can define a Macro with Parameters in Parenthesis, can I define a macro that replaces MyClass x = new MyClass(); with #ifdef MSC_VER if(!(MyClass x = new MyClass()) { throw new std::bad_alloc(); } #else MyClass x = new MyClass(); #endif (or something equivalent), AND works in BOTH MS C++ and G++ ? Or alternatively if that is not possible, a batch file to run over the Code to do this? I have become rather dependent on this exception being thrown.

  Read the article

• Fetch new Mails (Also from Subfolders) from another IMAP server as new Mail in Postfix

  - by Tobi

  everyone. I have installed Postfix on a server with Aliases and Domains from a MySQL Database. It is configured to forward some adresses to other Mail Accounts and also delivers some mails in local mailboxes that will be queried over a dovecot imap server. For this example let there be two users: [email protected] what is a user that gets its mail just forwarded to let's say [email protected] [email protected] what is a user that accesses its mail from local IMAP. Now, I want to fetch some Mails from another mailserver and handle them as if they were sent to a user of my Mailserver. Lets say those corelations exist: [email protected] has two external accounts: [email protected] and [email protected] [email protected] has also one external account [email protected] The Problem is the new mails on that other Mailserver is not always in the inbox, it might be in subdirectories: mailinglists/all or mailinglists/it but also in mailinglists/some-other-department which is not interesting and should not be delivered. I already found a programm called fetchmail but I cannot find how to fetch subdirectories or decide which subdirectories are fetched.

  Read the article

• How to open a page in Chrome from the command line, in a new tab or an existing tab as appropriate?

  - by MattH

  I'm looking for a way to open a given page in Google Chrome from the command line, with the following behaviour: If the given page is already open in a tab, navigate to that tab If the given page is not already open in a tab, open the page in a new tab and show that tab Currently when I open a URL from the command line (e.g. using "open http://godzillahaiku.tumblr.com" on Mac OS X), Chrome will always open the URL in a new tab. I end up with lots of duplicate tabs as a result, which is a minor annoyance. I'm looking for a solution that works on Mac OS X, but a non-OS specific solution would be preferable. I'd consider writing a Chrome extension for this if there's no existing solution.

  Read the article

• Soft 404 error on redirected outbound links

  - by Techlands

  I have a redirect script on my site which sends visitors to an affiliate site. However in the last month I've noticed that Google webmaster tools is reporting my outbound links as a 404 error. Here is the breakdown on how its setup: My outbound links are coded like this: <a href="/f/c123" rel="nofollow" target="_blank">Link Title</a> My redirect script will then perform a 302 redirect to the affiliate link Originally I had the affiliate links (CJ) directly in the HTML, however I noticed over time that this had some impact on my sites traffic. So I changed them to a redirect script and my traffic returned. This seemed to work with no issues for over 1 year but now I'm getting soft 404 errors in Google webmaster tools. I did try adding a rule in my robots.txt to block any links starting with /f/ but I'm not sure if this will help or Google will still report soft 404 errors. I am considering as possible options to change the a tag to a button tag and use an onclick event to load the link.

  Read the article

• Best approach for a multi-tab ASP.NET AJAX control?

  - by NovaJoe

  Looking for some implementation advice: I have a page that has a 3-tab ajaxToolkit:TabContainer. The purpose of the page is to expose a calculator that has two basic inputs: geo-location and date. The three tabs are labeled "City and State", "Postal Code", and "GPS Coordinates". The layout of each tab container is the same for each tab, with the exception of the location section; the location section changes because each type of location has different inputs. For example, to specify city/state, there will be three fields: city, country, and state (country and state will use cascading drop-down lists). But Postal code requires only one field (which will validate via regular expression for allowed countries). See the example design mockup: So, what I WOULD LIKE to do (in order to minimize duplicate code), is to have a common control that contains the layout and structure of the calculator without specifying anything about the location section. Then, I'd like to be able to pull in each of the unique location controls based on what tab is selected. The tab structure exists at the page level, not in a control. Any advice? I was looking at templated controls (see MSDN article here), but I'm not convinced that it's the right solution. If I HAVE to create three separate controls with similar layouts and common elements, then that's what I have to do. But REALLY, I'd prefer a more elegant, inheritance-based solution. Any advice would be greatly appreciated. Thanks.

  Read the article

• Why old (301) links stay on Google when breaking site down to multiple domains

  - by Sampo Sarrala

  Some background: We did have single site and single domain (let's call it mainsite.com) with product information, however things have changed since and product database has grown fast. So we decided to move some major products/manufacturers under their own domains (let's call one of them subsite.com) while still using our main database/codebase. What we've done: Added subsite.com domain for product 1 by Great Products Co. Some new nice looking front pages, info pages, etc. Detail pages that will use information from original db. Redirected product/group links from mainsite.com using 301 redirect. Verified that redirects works as expected. Waited some time for Google reindexing (over 30 days, I've heard it should be more than enough). Results: If I search our moved products from Google then it will found them and list them but with old links to our main page like mainsite.com/group/product1 but it should show link to new site subsite.com/product1. Links from Goole redirects as they should, as said redirects are verified [301]. Main question: Any reasons why Google would not follow 301 redirects and update links so that they will point to our new mfg/product site subsite.com?

  Read the article

• Bookmark Sentry Scans Your Chrome Bookmarks File For Bad Links and Dupes

  - by Jason Fitzpatrick

  Chrome: Bookmark Sentry, a free Chrome extension, takes the hard work out of checking your bookmark file for bad links and duplicates. Install it, forget about it, and get scheduled reports on the state of your bookmarks file. It’s that simple. Once you install the extension, open the options to toggle some basic settings to your liking (like the frequency of the scan, how long you want it to wait for a response, and whether you want it to look for bad links and/or duplicates). Once it finishes scanning you’ll get a report indicating the status of the links (why they are marked as missing or duped) and the ability to selectively or mass delete them. The only caveat we’d share is that it will tell you links behind any sort of security are unavailable. If you bookmark pages that you use for work, behind your corporate firewall for example, if the scanner runs when you’re not authenticated then it won’t be able to reach them. Other than that, it works like a charm. Bookmark Sentry is free, Google Chrome only. Bookmark Sentry [via Addictive Tips] How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

  Read the article

• How to automate detection of out of order tab navigation in Qt dialogs?

  - by WilliamKF

  Typically, a dialog wishes to have tab navigation proceed in an orderly fashion through a dialog that roughly corresponds to the order of reading a book. When new fields are added to a dialog by engineers on a team, the new widgets can often not be inserted in tab correct order. Can anyone think of a way to automate the detection of out of tab navigation order widgets within a dialog?

  Read the article

• alt + tab not working properly

  - by Ankit

  alt + tab functionality has suddenly started misbehaving. it's showing only desktop and the current active app instead of all the applications opened. For eg currently, opened applications are firefox and terminal but when i press alt+tab i can see either "desktop + firefox" or "desktop + terminal" depending upon whether the current active application is browser or terminal. I have not installed any update. Please help.

  Read the article

• How do I restore tab-completion on shell variables on the bash command-line?

  - by Eric

  I've long set my most-recently visited directories to shell variables d1, d2, etc. On an ancient Fedora machine I could type a command like $ cp $d1/ and the shell would replace $d1 with text like /home/acctname/projects/blog/ and would then show me the contents of .../blog, like any tab-completion. Now, both ubuntu wheezy/sid and fedora 16 just -escape the '$', and naturally there are no completions to show. You can see this behavior in action in an OSX Terminal window. On 10.8, do something like ls $HOME/ to see what I mean. Is there a bash shell variable or option that can restore the old behavior? man bash suggests this is a bug: complete (TAB) Attempt to perform completion on the text before point. Bash attempts completion treating the text as a variable (if the text begins with $), username (if the text begins with ~), hostname (if the text begins with @), or command (including aliases and functions) in turn. If none of these produces a match, filename completion is attempted. I get the above described completion when a token starts with '~' or a letter. It's just '$'-completion that's broken.

  Read the article

• Reload UItabbar view when using selectedIndex

  - by Hetal Vora

  Hi, In my application I have 4 tabs in my tab bar. There is a navigation where if i click on a button on tab bar 2 view, it should take me to tab bar 3 view. I am doing this by using setting the selectedIndex property of tab bar like appDelegate.tabBarController.selectedIndex = 2; However, this doesn't reload the view of tab bar 3. It simply shows the tab bar 3 view that was last accessed (which may be down the navigation hieararchy in tab bar 3). Please help as to how can i reload the root view of tab bar 3. I tried having the delegate method of tabbar as below: - (void)tabBarController:(UITabBarController *)tabBarController didSelectViewController:(UIViewController *)viewController { [viewController.navigationController popToRootViewControllerAnimated:FALSE]; } but this works only if I click on a tab to go to the view and doesn't work with selectedIndex.Please help.

  Read the article

• Upload to PPA succeeded but packages doesn't appear

  - by lorin

  I'm trying to upload packages to my PPA for the first time. I want to use the PPA for customized versions of the OpenStack Compute (nova) project, so I tried to do a test by uploading packages corresponding to the bexar release of this project (lp:nova/bexar), with a new version number and changelog entry. I signed the source packages using my OpenGPG key, which has been uploaded to the ubuntu keyserver: $ dch -v 2011.1-0ubuntu2-isi1 -D lucid "ISI bexar build #1" $ dpkg-buildpackage -s -rfakeroot -tc -D -k4C8A14AB When I tried to upload the files to the repository, it seemed to work (real email obscured): $ dput ppa:lorinh/ppa nova_2011.2~bzr663-1isi1_source.changes Checking signature on .changes gpg: Signature made Fri 11 Feb 2011 03:52:50 PM EST using RSA key ID 4C8A14AB gpg: Good signature from "Lorin Hochstein <lorin@...>" Good signature on /home/lorin/packaging/nova_2011.2~bzr663-1isi1_source.changes. Checking signature on .dsc gpg: Signature made Fri 11 Feb 2011 03:52:44 PM EST using RSA key ID 4C8A14AB gpg: Good signature from "Lorin Hochstein <lorin@...>" Good signature on /home/lorin/packaging/nova_2011.2~bzr663-1isi1.dsc. Uploading to ppa (via ftp to ppa.launchpad.net): Uploading nova_2011.2~bzr663-1isi1.dsc: done. Uploading nova_2011.2~bzr663-1isi1.tar.gz: done. Uploading nova_2011.2~bzr663-1isi1_source.changes: done. However, the packages aren't listed on my PPA page. If I try to upload again, I get the error: $ dput ppa:lorinh/ppa nova_2011.2~bzr663-1isi1_source.changes Package has already been uploaded to ppa on ppa.launchpad.net Nothing more to do for nova_2011.2~bzr663-1isi1_source.changes Am I supposed to do something next? How do I track down what wrong? As of this writing, it's been a day and a half since I've done the upload.

  Read the article

• mythbuntu 12 - lirc device doesn't appear to even exist

  - by FrustratedWithFormsDesigner

  I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

  Read the article

• Are mailto: links practically deprecated?

  - by Leonid Shevtsov

  I was thinking... Mailto: links are handled by standalone email clients only. Most users nowadays use webmail (like GMail). Webmail can't handle mailto: links. When a webmail user clicks a mailto: link, he gets either a confusing message about no email client installed, or the link opening in an email client he doesn't use. Anyone can copy and paste an email address, considering the addresses don't always come in a mailto:. Ergo, mailto: links are harmful and deprecated? Should I not use them when I need to display an email address?

  Read the article

• How to Save Tweet Links for Later Reading from Your Desktop and Phone

  - by Zainul Franciscus

  Have you come across a lot of interesting links from Twitter, but you don’t have the time to read all of them? Today we’ll show you how to read these links later from your desktop and phone. Organizing links from Twitter can be a troublesome, but these tools will reduce the effort greatly Latest Features How-To Geek ETC The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin View the Cars of Tomorrow Through the Eyes of the Past [Historical Video] Add Romance to Your Desktop with These Two Valentine’s Day Themes for Windows 7 Gmail’s Priority Inbox Now Available for Mobile Web Browsers Touchpad Blocker Locks Down Your Touchpad While Typing Arrival of the Viking Fleet Wallpaper A History of Vintage Transformers [Infographic]

  Read the article

• Links and code from session on Entity Framework 4, Parallel and C# 4.0 new features

  - by Eric Nelson

  Last week (12th May 2010) I did a session in the city on lot of the new .NET 4.0 Stuff. My demo code and links below. Code Parallel demos http://gist.github.com/364522  C# 4.0 new features http://gist.github.com/403826  EF4 Links Entity Framework 4 Resources http://bit.ly/ef4resources Entity Framework Team Blog http://blogs.msdn.com/adonet Entity Framework Design Blog http://blogs.msdn.com/efdesign/ Parallel Links Parallel Computing Dev Center http://msdn.com/concurrency Code samples http://code.msdn.microsoft.com/ParExtSamples Managed blog http://blogs.msdn.com/pfxteam Tools blog http://blogs.msdn.com/visualizeparallel C# 4.0 New features http://bit.ly/baq3aU  New in .NET 4.0 Coevolution http://bit.ly/axglst  New in C# 4.0 http://bit.ly/bG1U2Y

  Read the article

• Windows Phone 7 Development &ndash; Useful Links

  - by David Turner

  Here are some excellent links for anyone developing for Windows Phone 7: J.D. Meier’s Windows Phone Developer Guidance Map – this is immense.  Also check out the Silverlight version Justin Angel’s site – some really great articles on unlocked roms, automation and Continuous Integration Windows Phone 7 Development Best Practices Wiki Jeff Blankenburg’s 31 days of Windows Phone 7 This post of Links to sample code for Windows Phone Tim Heuers blog, particularly this post of Tips and Tricks Kevin Marshall's blog, particularly the epic WP7 Development Tips Part 1 post Code Samples for Windows Phone on MSDN If you have unlocked your phone for development, then you can use the WPConnect tool to connect to the device rather than using the Zune client.  I found it useful to pin a shortcut to WPConnect in my Start Menu. The Performance Counters displayed when you debug your app on a device are useful for seeing things like frame rate and memory usage, this page on MSDN explains what the numbers mean.  Jeff Blankenburg covers this in more details on his blog I also came across this set of links to tutorials recently which looks very useful. Creating Windows Phone 7 Application and Marketplace Icons: http://expression.microsoft.com/en-us/gg317447.aspx

  Read the article

• Risk for hosting SEO links. [closed]

  - by mconnors

  Possible Duplicate: SEO drawbacks of having paid links without nofollow? A few companies are will to pay us for links on our homepage. I am assuming these are legitimate sites although they are unrelated to our sites content. Would google penalize our site for having these links? We definitely need the revenue and we view this as selling advertising space- but I don't want to kill our good ranking. Does anyone have any insight, is it possible to ask google directly?

  Read the article

• Windows 2008 R2, UDDI 3.0 and No Admin Links

  - by Andy Morrison

  Windows 2008 R2 might end up giving me a heart attack at some point. Yesterday I installed and configured UDDI 3.0 as part of an ESB 2.0 install & config.  After configuring UDDI 3.0, if I browsed to the localhost/uddi virtual directory from IIS, all of the links would show up in UDDI.  If opened up IE and went to the UDDI site only the Home and Search links would show up. You've probably already guessed at what the "fix" was... I had to Run IE as Administrator.  Then when I browse to the UDDI site all of the links show up.

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >