Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 150/431 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

  - by Brooks Moses

  I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

  Read the article

• Getting an error when mounting LVM snapshot

  - by Sandra

  I have migrated a file based Xen guest to LVM using dd bs=1M if=/dev/zero of=/dev/vg00/vm10 qemu-img convert ~/vm10.qcow2 -O raw /dev/vg00/vm10 and changed the Xen domain file for the VM to use the LV instead of the old file. The VM boots up, and now on the Xen host would I like to make a snapshot of the running VM. # lvcreate --size 10G --snapshot --name vm10-snapshot /dev/vg00/vm10 Logical volume "vm10-snapshot" created # mount /dev/vg00/vm10-snapshot /mnt/snapshot/ mount: you must specify the filesystem type # dmesg |tail EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-4. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-2. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock For some reason it can't see it is an EXT3 filesystem. I have also tried to mount with -t ext3, but still didn't mount. # lvdisplay --- Logical volume --- LV Name /dev/vg00/vm10 VG Name vg00 LV UUID I1y1vQ-Bac5-5jwW-melh-TY5h-l9NO-qaelKk LV Write Access read/write LV snapshot status source of /dev/vg00/vm10-snapshot [active] LV Status available # open 2 LV Size 8.00 GB Current LE 2048 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/vg00/vm10-snapshot VG Name vg00 LV UUID GWsOx3-TPpr-GW64-uiMz-u1YN-QU4h-l0Kala LV Write Access read/write LV snapshot status active destination for /dev/vg00/vm10 LV Status available # open 0 LV Size 8.00 GB Current LE 2048 COW-table size 10.00 GB COW-table LE 2560 Allocated to snapshot 0.00% Snapshot chunk size 4.00 KB Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4 # What could the problem be?

  Read the article

• Mounting Replicated Gluster Multi-AZ Storage

  - by Roman Newaza

  I have Replicated Gluster Storage which is used by Auto scaling Servers. Both, Auto scaling and Storage are allocated in two Availability zones. Gluster: Number of Bricks: 4 x 2 = 8 Transport-type: tcp Bricks: Brick1: gluster01:/storage/1a # Zone A Brick2: gluster02:/storage/1b # Zone B Brick3: gluster03:/storage/2a # Zone A Brick4: gluster04:/storage/2b # Zone B Brick5: gluster01:/storage/3a # Zone A Brick6: gluster02:/storage/3b # Zone B Brick7: gluster03:/storage/4a # Zone A Brick8: gluster04:/storage/4b # Zone B I used Round Robin DNS for Gluster entry point, so DNS name resolves to all of the storage server addresses which are returned in different order all the time: # host storage.domain.com storage.domain.com has address xx.xx.xx.x1 storage.domain.com has address xx.xx.xx.x2 storage.domain.com has address xx.xx.xx.x3 storage.domain.com has address xx.xx.xx.x4 The Storage is mounted with Native Gluster Client: # grep storage /etc/fstab storage.domain.com:/storage /storage glusterfs defaults,log-level=WARNING,log-file=/var/log/gluster.log 0 0 I have heard Gluster might be mounted with the first Server IP and after that it will fetch its configuration with the rest of Servers. Personally, I never tested single Server mount setup and I don't know how Gluster handles this. On EC2, traffic among single Availability zone is free and between different zones is not. When Client in zone A writes to storage and IP of Storage in zone B is returned, it will cost me twice more for data transfer: Client (Zone A) - Storage Server (Zone B) - Replication to Storage Server (Zone A). Question: Would it be better to mount Storage Server of the same zone, so that data transfer charges apply only for replication (A - A - B)?

  Read the article

• How to use my computer as a Headset device for my phone with Bluetooth?

  - by TheJelly

  I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

  Read the article

• EC2 Configuration

  - by user123683

  I am trying to create a server structure for my EC2 account. The design I have chosen consists of 2 instances running in different availability zones, elastic load balancer, an auto-scaling group with cloudwatch monitoring configured and a security group defining rules for access to the instances. This setup is to support an online web application written in PHP. I am trying to decide what is a better policy: Store MySQL DB on a separate Instance Store MySQL DB on an attached EBS volume (from what i know auto-scaling will not replicate the attached EBS volume but will generate new instances from a chosen AMI - is this view correct?) Regards the AMI I plan to use a basic Amazon linux 64 bit AMI, and install bastille (maybe OSSEC) but I am looking to also use an encrypted file system. Are there any issues using an encrypted file system and communication between the DB and webapp i neeed to be aware of? Are there any comms issues using the encrypted filesystem on the instance housing the webapp I was going to launch a second instance or attach a second volume in the second availability zone to act as a standby for the database - I'm just looking for some suggestions about how to get the two DB's to talk - will this be a big task Regards updates for security is it best to create a recent snapshot and just relaunch and allow Amazon to install updates on launch or is the yum update mechanism a suitable alternative - is it better practice to relaunch instead of updates being installed which force a restart. I plan to create two AMI snapshots one for the app server and one for the DB each with the same security measures in place - is this a reasonable - I just figure it is a better policy than having additional applications that are unnecessary included in a AMI that I intend on using. My plan for backup is to create periodic snapshots of the webapp and DB instances (if I use an additional EBS volume instead of separate instances my understanding is that the EBS volume will persist in S3 storage in the event of an unexpected termination and I can create snapshots of the volume backup purposes). Thanks in advance for suggestions and advice. I am new to EC2 and I may have described unnecessary overkill but I want to try implement what can be considered a best practice solution so all advice is appreciated.

  Read the article

• On Windows XP, Start > Run "My Documents" sometimes doesn't work

  - by Clayton Hughes

  On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

  Read the article

• Acer Aspire one is falling apart on Ubuntu

  - by Narcolapser

  Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

  Read the article

• Windows Media Sharing not 'always' being detected by PS3

  - by Ahmad

  I'm having a weird problem with Windows Media Sharing on Windows 7 .. I have the following hardware in my network: PC 1 --- My main PC --- runs Windows 7 Ultimate x64 PC 2 --- My backup PC --- runs Windows 7 Ultimate x32 PS3 PC 1 is my main PC which has all my data/media on it .. PC 2 is a backup PC I have, but I use it like once in 2 months .. It has nothing installed on it apart from some very very basic software ... Problem is, my PS3 always sees the media sharing service coming from PC 2, but it never sees the media sharing service coming from PC 1 initially .. Both PC 1 and PC 2 have the same media sharing configuration (All everything on all devices on all networks) ... But when I restart both PCs, the PS3 will only detect PC 2's media sharing service, not PC1 .... However here's the twist .. When PC 1 is restarted, and if I view my 'Network' on PC 2, I do see PC 1's Media Sharing Service, and I'm able to play from it too on PC 2 .. To get my PS3 to also see PC 1's media sharing service, I have to do either of the following 2 things: 1) Play something from PC 1's media sharing service on PC 2 ... The PS3 will then magically also detect PC 1's media sharing service .. 2) Go into the Services area on PC 1 and restart the 'Windows Media Player Network Sharing Service' ... After this, the PS3 also instantly starts to see PC 1's media sharing service .. Since my PS3 is like a month old and is properly detecting PC 1's media sharing service, I think the problem is somewhere in the configuration of PC 1's media sharing service ... Also, on PC 1 I have Norton Internet Security 2012 installed, but I've disabled it completely, and have also disabled Windows Firewall (from PC 1 only) .. Can someone shed some light onto this ?

  Read the article

• Data recovery on a data HDD (no OS)

  - by aCuria

  I am helping a family member with a dead hard disk. It is a seagate 200Gb 3.5" HDD in one of those old-school external enclosures. The problem was that windows failed to detect the hard disk when plugged in through USB. I removed the hard disk from its enclosure, and plugged it into my desktop PC. The BIOS does detect it upon POST, but unfortunately windows 7 would refuse to boot. It will get stuck on the loading screen with the glowing windows logo. Safe mode doesn't help either. What options do I have before going for some professional data recovery? edit: Someone modified the Title to something completely different from what I was asking, i just changed it back. 1) 2 HDD drives, DiskA(Dead), DiskB(my OS disk) 2) when B is connected to my system, everything works fine 3) when A AND B is connected, failure to boot. POSTs fine, but windows wont load 4) A has NO OS, its PURE data. It came from an EXTERNAL HDD enclosure which doesnt belong to me, and im trying to do data recovery.

  Read the article

• How do I make dnsmasq serve IP addresses via IPoIB?

  - by Matt

  I have a cluster farm that I'm setting up. The nodes (computers in the farm) are connected via ethernet & IP over Infiniband. I'm needing to netboot the nodes and thought dnsmasq would fit well as it provides all the features including support for DHCP over IB and it works great for our ethernet setup. However, I can't seem to get it to provide IP addresses to the infiniband adaptors on the nodes. Each node is running an Ubuntu desktop 12.04 LTS. The dnsmasq server is running on ubuntu server 12.04LTS and has the following test config: dhcp-authoritative domain-needed bogus-priv expand-hosts no-hosts domain=local dhcp-range=eth0,10.0.0.10,10.0.0.255,12h dhcp-option=eth0,3,10.0.0.1 dhcp-range=ib0,10.1.1.10,10.1.1.255,12h dhcp-option=ib0,3,10.1.1.1 log-queries log-dhcp IPoIB works between nodes when configured statically but not with dhcp. On the nodes the file /etc/network/interfaces contains auto lo iface lo inet loopback auto ib0 iface ib0 inet dhcp #iface ib0 inet static #address 10.1.1.5 #netmask 255.0.0.0 up echo connected >`find /sys -name mode | grep ib0` Is there something I need to do on the client or server end to make this work?

  Read the article

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Ubuntu Server: Networking fails with MODPROBE option in /etc/network/interfaces ... ??

  - by neezer

  For some reason (which I haven't been able to determine yet), yesterday morning the networking service on our web server (running Ubuntu 8.04.2 LTS -- hardy) wouldn't start, and our website went down. I noticed the following error message when trying to restart it: * Reconfiguring network interfaces... /etc/network/interfaces:6: option with empty value ifup: couldn't read interfaces file "/etc/network/interfaces" ...fail! Line 6 in the /etc/network/interfaces file concerned a MODPROBE command, which (I believe) loaded in the ip_conntrack_ftp module so that I could use PASV on my FTP server (vsftpd): (breaking modprobe commands commented out below) # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. # The loopback network interface auto lo iface lo inet loopback #MODPROBE=/sbin/modprobe #$MODPROBE ip_conntrack_ftp pre-up iptables-restore < /etc/iptables.up.rules # The primary network interface # Uncomment this and configure after the system has booted for the first time auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask 255.255.255.0 gateway xxx.xxx.xxx.1 dns-nameservers xxx.xxx.xxx.4 xxx.xxx.xxx.5 I've verified that there is a file in /sbin called modprobe. Like I said earlier, this setup had been working flawlessly until yesterday morning (though my bosses say that the site actually went down the previous night at 11 PM EST). Can anyone shed some light on (A) why this broke, and (B) how can I re-enable the ip_conntrack_ftp module?

  Read the article

• Why is Windows Update trying to install an update I don't need?

  - by Oliver Salzburg

  I have a Windows 7 system that currently has a single update pending: Windows Internet Explorer 9 for Windows 7 for x64-based Systems If I try to install the update, Windows Update will: Create a restore point Fail with the error: Code 9C48 Windows Update encountered an error. The event log for the event reads: Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. If you search the web for that error, there are many other people with the exact same issue. Sadly, I am unable to apply the proposed solutions to my case, because I just installed this system. There is nothing on it, except Windows 7. I installed the system and ran through the updates. I also did the exact same process with this machine several times over the past few days due to a long-term test we just started. I didn't have any problems with any Windows Update on the previous installation runs and I know I didn't do anything different this time because I followed the installation procedures instructions which are to be used during the test. How did this happen and how do I solve it? Further Investigation So, as I always like to do, I ran the update again while running Process Monitor and dug up further details. WindowsUpdate.log First of all, there is a Windows Update log file located at C:\Windows\WindowsUpdate.log which I didn't know about. But I fail to see any significant entry in it, maybe you're more lucky: 2012-04-10 22:46:58:017 956 728 AU AU received approval from Ux for 1 updates 2012-04-10 22:46:58:017 956 728 AU AU setting pending client directive to 'Progress Ux' 2012-04-10 22:46:58:095 956 728 AU BeginInteractiveInstall invoked for Download 2012-04-10 22:46:58:095 956 728 AU Auto-approving update for download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:46:58:095 956 728 AU Auto-approved 1 update(s) for download (for Ux) 2012-04-10 22:46:58:110 956 728 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:46:58:110 956 728 AU ############# 2012-04-10 22:46:58:110 956 728 AU ## START ## AU: Download updates 2012-04-10 22:46:58:110 956 728 AU ######### 2012-04-10 22:46:58:110 956 728 AU # Approved updates = 1 2012-04-10 22:46:58:110 956 728 AU AU initiated download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, callId = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 728 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:110 956 bb8 DnldMgr ************* 2012-04-10 22:46:58:110 956 bb8 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:110 956 bb8 DnldMgr ********* 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Call ID = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Updates to download = 1 2012-04-10 22:46:58:110 956 bb8 Agent * Title = Windows Internet Explorer 9 for Windows 7 for x64-based Systems 2012-04-10 22:46:58:110 956 bb8 Agent * UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100 2012-04-10 22:46:58:110 956 bb8 Agent * Bundles 1 updates: 2012-04-10 22:46:58:110 956 bb8 Agent * {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100 2012-04-10 22:46:58:110 956 bb8 DnldMgr *********** DnldMgr: New download job [UpdateId = {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100] *********** 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU # Pending download calls = 1 2012-04-10 22:46:58:110 956 728 AU ## RESUMED ## AU: Download update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}, succeeded] 2012-04-10 22:46:58:313 956 bb8 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:313 956 bb8 Agent ************* 2012-04-10 22:46:58:313 956 718 AU ######### 2012-04-10 22:46:58:313 956 718 AU ## END ## AU: Download updates 2012-04-10 22:46:58:313 956 718 AU ############# 2012-04-10 22:46:58:313 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 718 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 aac AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:46:58:313 956 aac AU No featured updates available. 2012-04-10 22:47:00:107 956 aac AU BeginInteractiveInstall invoked for Install 2012-04-10 22:47:00:107 956 aac AU Auto-approving update for install, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:47:00:107 956 aac AU Auto-approved 1 update(s) for install (for Ux), installType=1 2012-04-10 22:47:00:107 956 aac AU ############# 2012-04-10 22:47:00:107 956 aac AU ## START ## AU: Install updates 2012-04-10 22:47:00:107 956 aac AU ######### 2012-04-10 22:47:00:107 956 aac AU # Initiating manual install 2012-04-10 22:47:00:107 956 aac AU # Approved updates = 1 2012-04-10 22:47:00:107 956 aac AU ## RESUMED ## AU: Installing update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}] 2012-04-10 22:47:13:773 2232 9fc Handler : WARNING: Exit code = 0x8024200B 2012-04-10 22:47:13:773 956 718 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C48 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::: 2012-04-10 22:47:13:773 2232 9fc Handler :: END :: Handler: Command Line Install 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::::::: 2012-04-10 22:47:13:851 956 a7c Agent ********* 2012-04-10 22:47:13:851 956 a7c Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates] 2012-04-10 22:47:13:851 956 718 AU Install call completed. 2012-04-10 22:47:13:851 956 a7c Agent ************* 2012-04-10 22:47:13:851 956 718 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000 2012-04-10 22:47:13:851 956 718 AU ######### 2012-04-10 22:47:13:851 956 718 AU ## END ## AU: Installing updates [CallId = {FCFF2A5C-25AB-4FB9-AB2B-35C65CCA6A9F}] 2012-04-10 22:47:13:851 956 718 AU ############# 2012-04-10 22:47:13:851 956 718 AU Install complete for all calls, reboot NOT needed 2012-04-10 22:47:13:851 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:13:851 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:13:851 956 498 AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:13:851 956 498 AU No featured updates available. 2012-04-10 22:47:14:366 956 168 AU No featured updates notifications to show 2012-04-10 22:47:14:366 956 168 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:47:14:366 956 168 AU Triggering Offline detection (non-interactive) 2012-04-10 22:47:14:366 956 168 AU AU setting pending client directive to 'Install Complete Ux' 2012-04-10 22:47:14:366 956 168 AU Changing existing AU client directive from 'Progress Ux' to 'Install Complete Ux', session id = 0x1 2012-04-10 22:47:14:366 956 168 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:14:366 956 b78 AU ############# 2012-04-10 22:47:14:366 956 b78 AU ## START ## AU: Search for updates 2012-04-10 22:47:14:366 956 b78 AU ######### 2012-04-10 22:47:14:366 956 b78 AU ## RESUMED ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU # 1 updates detected 2012-04-10 22:47:16:097 956 718 AU ######### 2012-04-10 22:47:16:097 956 718 AU ## END ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU ############# 2012-04-10 22:47:16:097 956 718 AU No featured updates notifications to show 2012-04-10 22:47:16:097 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:113 956 55c AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:16:113 956 55c AU No featured updates available. 2012-04-10 22:47:18:780 956 bb8 Report REPORT EVENT: {27479C66-E930-4F9C-AFF2-27EDD76DED8F} 2012-04-10 22:47:13:773+0200 1 182 101 {B33ACEC1-3265-4D01-9C37-AC0892E95ED9} 100 80070643 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2012-04-10 22:47:18:780 956 bb8 Report WER Report sent: 7.5.7601.17514 0x80070643 B33ACEC1-3265-4D01-9C37-AC0892E95ED9 Install 101 Unmanaged 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter finishing event handling. (00000000) WU-IE9-Windows7-x64.exe The actual update that is executed is downloaded and stored at the following location: C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe Executing that file manually, results in the following error message: IE9_main.log The IE9 installer/updater also creates an own log file located at C:\Windows\IE9_main.log For the update session in question, the installer logged: 00:00.000: ==================================================================== 00:00.016: Started: 2012/04/10 (Y/M/D) 23:10:53.897 (local) 00:00.032: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds) 00:00.063: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe" 00:00.078: INFO: Setup installer for Internet Explorer: 9.0.8112.16421 00:00.094: INFO: Previous version of Internet Explorer: 9.0.8112.16443 00:00.110: INFO: Checking if iexplore.exe's current version is between 9.0.6001.0... 00:00.125: INFO: ...and 9.1.0.0... 00:00.141: INFO: Maximum version on which to run IEAK branding is: 9.1.0.0... 00:00.156: ERROR: A newer version of Internet Explorer is already installed on the system. 00:00.188: ERROR: Internet Explorer version check failed. 01:03.789: INFO: Setup exit code: 0x00009C48 (40008) - A more recent version of Internet Explorer is installed. 01:03.820: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll 01:03.852: INFO: SQM Upload returned 403 01:03.867: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE978E.tmp 01:03.883: INFO: Unable to remove directory C:\Windows\TEMP\IE978E.tmp, marking for deletion on reboot. 01:03.898: INFO: Released Internet Explorer Installer Mutex Which pretty much confirms what the error message says when executing the update manually; it's simply already installed or even obsolete because a newer version is installed. So, why does it try to keep installing the update? Possible solutions? Uninstalling Windows Internet Explorer 9 and manually installing the cached C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe will result in the same error after applying all pending updates. Applying the FixIt for the issue You receive “0x80070643” or “0x643” error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updates will not resolve the issue. Applying the suggested solution for the issue Error message when you try to install updates by using the Windows Update or Microsoft Update Web site: "0x80070003" will not resolve the issue. Running the FixIt Automatically diagnose and fix common problems with Windows Update does report having resolved issues with Windows Update, but didn't resolve the issue. Running the FixIt for the issue How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update does not resolve the issue. Neither with normal nor with aggressive settings.

  Read the article

• CSS gradient not rendering in Windows Phone 8 WebBrowser Control

  - by SRSHawk

  I am facing an issue where, the CSS3 background is not rendered in WebBrowser control in Windows Phone 8. But same HTML when opened in WebBrowser in Windows Phone 8, it renders the gradient The HTML I am using is: <html> <head> <meta name="viewport" content="width=320, user-scalable=no, minimum-scale=1, maximum-scale=1"/> </head> <body style="margin:0px;overflow:hidden;"> <div id="im_c" style="height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);"> <div style="margin:0 auto;width:320px;"> Test </div> </div> <style> body {margin:0px} </style> </body> In Windows Phone 8, I use the HTML as below: WebBroswer WebView = new WebBrowser(); WebView.Height = 100; WebView.Width = 400; WebView.NavigateToString(@"<html><head><meta name=""viewport"" content=""width=320, user-scalable=no, minimum-scale=1, maximum-scale=1""/></head><body style=""margin:0px;overflow:hidden;""> <div id=""im_c"" style=""height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);""> <div style=""margin:0 auto;width:320px;"">Test</div></div> <style> body {margin:0px} </style> </body></html>"); In this case, the CSS gradient is not visible. Am I missing something?

  Read the article

• [Ubuntu 10.04] mdadm - Can't get RAID5 Array To Start

  - by Matthew Hodgkins

  Hello, after a power failure my RAID array refuses to start. When I boot I have to sudo mdadm --assemble --force /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 to get mdadm to notice the array. Here are the details (after I force assemble). sudo mdadm --misc --detail /dev/md0: /dev/md0: Version : 00.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 6 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 17 23:02:38 2010 State : active, Not Started Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 128K UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1249691 Number Major Minor RaidDevice State 0 8 65 0 active sync /dev/sde1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 49 3 active sync /dev/sdd1 4 8 33 4 active sync /dev/sdc1 5 8 17 5 active sync /dev/sdb1 mdadm.conf: # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions /dev/sdb1 /dev/sdb1 # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # definitions of existing MD arrays ARRAY /dev/md0 level=raid5 num-devices=6 UUID=44a8f730:b9bea6ea:3a28392c:12b22235 Any help would be appreciated.

  Read the article

• Diagnosing linux issues with ipod syncing in Ubuntu

  - by alexpotato

  Issue: I am currently using Ubuntu 9.10 with a 5th generation Ipod 60 GB Black video classic. In general, it seems that Ubuntu can always detect the usb hd and displays it on my desktop. However, some applications seem to detect the ipod (e.g. Rythymbox and gtkpod do but Banshee does not) and some don't. I narrowed down the banshee issue to a bug that requires Nautilus to be restarted (although it would be nice to not have to do this). Also, Whenever I sync between these applications, it appears that everything is working fine during the sync but when I disconnect the ipod and browse, all of the songs seem to be there but the playlists are not. If I reconnect the ipod, in banshee specifically it sees the space usage as "other". What I am looking for is some way to at least understand what is and is not working OR directions to some where that can help me learn what's going on. I have already tried: -IRC. Either the channel is too general (e.g. #ubuntu) or no one is ever one (e.g. #banshee) -The web. Most of what I've found is too specific to one particular bug or too general. Any thoughts?

  Read the article

• Does fast typing influence fast programming?

  - by Lukasz Lew

  Many young programmers think that their bottleneck is typing speed. After some experience one realizes that it is not the case, you have to think much more than type. At some point my room-mate forced me to turn of the light (he sleeps during the night). I had to learn to touch type and I experienced an actual improvement in programming skill. The most surprising was that the improvement not due to sheer typing speed, but to a change in mindset. I'm less afraid now to try new things and refactor them later if they work well. It's like having a new tool in the bag. Have anyone of you had similar experience? Now I trained a touch typing a little with KTouch. I find auto-generate lessons the best. I can use this program to create new lessons out of text files but it's only verbatim training, not auto-generated based on a language model. Do you know any touch typing program that allows creation of custom, but randomized lessons?

  Read the article

• Find out the type of an automounted device

  - by Steve Bennett

  I'm working on a system (Ubuntu Precise) with a mount defined in /etc/fstab as follows: /dev/vdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 Originally I just wanted to find out if it's NFS (due to potential MySQL locking issues). Judging from man mount, it's not: If no -t option is given, or if the auto type is specified, mount will try to guess the desired type. Mount uses the blkid library for guessing the filesystem type; if that does not turn up anything that looks familiar, mount will try to read the file /etc/filesystems, or, if that does not exist, /proc/filesystems. All of the filesystem types listed there will be tried, except for those that are labeled "nodev" (e.g., devpts, proc and nfs). If /etc/filesystems ends in a line with a single * only, mount will read /proc/filesystems afterwards. But, out of curiosity now, how can I find out more about what type of device it actually is? (For context, this is a VM running on OpenStack. The device is a 60Gb allocation mounted from somewhere - but I don't know how.)` EDIT Including answers here: $ mount /dev/vdb on /mnt type ext3 (rw,_netdev) $ df -T /dev/vdb ext3 61927420 2936068 55845624 5% /mnt

  Read the article

• Why is the link between my switch and my router always negotiating half-duplex mode?

  - by Massimo

  I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

  Read the article

• Ubuntu 11.10 ATI Drivers vesa park

  - by Matthias

  This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

  Read the article

• No signal on monitor after plug it to a linux box

  - by yaroot

  I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

  - by Damainman

  I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >