Search Results

Search found 9132 results on 366 pages for 'big endian'.

Page 150/366 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Netgear Wireless-n 150 wrn1000v2

  - by Jordan

  I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

  Read the article

• Microsoft Office 2007

  - by nardone25

  Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

  Read the article

• DNS servers via RA in IPv6

  - by glglgl

  Some time ago, RFC 6106 was created, which states how a router tells the clients about the DNS server to be used. It is a new standard, it has to be implemented, which needs time etc. I'm courious about the need for it: wouldn't have it been better to define a "globally valid" anycast address for DNS? Queries would be sent to this address and would be promoted along the default route until there is a host which claims to be responsible for it. In an enterprise network, that would be a central DNS server (or even more, on really big companies); in a SOHO network, it would either be the router or the DNS server of the ISP, in a root server hosting data center, it would be the DNS of the hoster, etc. What do I see wrong here? Do I have a wrong view of the anycast concept?

  Read the article

• Why is (free_space + used_space) != total_size in df? [migrated]

  - by Timothy Jones

  I have a ~2TB ext4 USB external disk which is about half full: $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc 1922860848 927384456 897800668 51% /media/big I'm wondering why the total size (1922860848) isn't the same as Used+Available (1825185124)? From this answer I see that 5% of the disk might be reserved for root, but that would still only take the total used to 1921328166, which is still off. Is it related to some other filesystem overhead? In case it's relevant, lsof -n | grep deleted shows no deleted files on this disk, and there are no other filesystems mounted inside this one.

  Read the article

• VmWare / Citrix Xen type environment vs Ubuntu Cloud / Amazon EC2 type environment.

  - by Nick Gorbikoff

  Hello. A bit of background. We run a small in house data center: about 20 virtualized servers (Debian Lenny, Windows 2003, Windows xp and Windows 7 machines), in a Citrix Xen pool running on 3 host servers and a SAN, plus a few standalone machines running legacy or specialized software that can't be vritualized. There is a big push everywhere now to move to cloud so we considering Ubuntu Cloud. I was wondering what are the pros / cons of running virtualized pool vs cloud to run all those machines? Thank you

  Read the article

• Unable to mount TuneUp DMG and no errors given on Mac

  - by Cawas

  Simply try to download and run the DMG "installer" from TuneUp on SnowLeopard. It doesn't work, doesn't give any error message and not even Console messages! I've just mounted other DMG files with no problems, both right before and right after trying that one. Anyone knows what could be wrong there? I've actually managed to open it using Springy, so no big worries. But that doesn't answer what's wrong with it. That just shows it's not file corruption.

  Read the article

• Does my motherboard support dual-core processors?

  - by Filip

  Hi there! I'm very confused about my motherboard (ConRoe945PL-GLAN) It's manual says, that i can use only some kind of ConRoe processors. But some pages on internet says that i can plug in almost everything. For ex.: aria.co.uk says that i can plug in even Core 2 Duo. It would be awesome if i would not have to buy new motherboard! Anyway, if my motherboard will not let me to plug in Core 2 Duo, should i buy Pentium 4 (very cheap) with 3,2 GHz and insanely overclock it to have some performance or buy new motherboard + new processor for big money? THX for any answers! =)

  Read the article

• Is Ubuntu Netbook Remix actually lighter than Ubuntu Desktop?

  - by D Connors

  I'm running ubuntu on my work notebook. While it's not a netbook, it is a relatively weak machine. So, even though I'm not a big fan of the ubuntu netbook interface, I would be willing to use it if it's lighter (on RAM and CPU) than the desktop version. I know there are some very light linux distros available out there, but I'd like to stick with ubuntu both for it's community and for the support I have available here at my workplace. So, is Ubuntu Netbook Remix lighter on system resources than Ubuntu Desktop?

  Read the article

• OSX Finder - Creating New Folder with Right-Click in List View

  - by JT.WK

  I am aware that when using finder in List view, I can create a new folder by right-clicking on an empty row, and pressing 'New Folder'. However, when I happen to be browsing a folder with quite a lot of files (or just enough to invoke a scrollbar), there are no blank rows, and hence nowhere that I can right-click to create a new folder. This is not a big problem, I am just a whinger who likes consistency and find this frustrating. Yes, I am aware that I can press 'Shift + Cmd + N', or can simply change the Finder view. BUT, is there a way to do this within list view? Am I missing something obvious?

  Read the article

• Ideas for SVN/SQL/PHP/Linux Dev Enviroment Supporting Multiple Isolated Environments?

  - by jpganz18

  I am trying to create a "dev" for my users. In that environment they would access to their own account of PHPMyAdmin, SQL, Subversion and FTP which is not a big problem, but I would like to emulate like if each one would be in their own server. I mean so that they could change the PHP configuration (for example) and would be done only in its own environment. Any idea how to do this? Do I have to make something "special" at the installations of my server or something like that?

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• Can I put a laptop Core i7 CPU in a desktop?

  - by Weezy

  One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory). I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons. So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]). Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

  Read the article

• Which OS/distributions have 64-bit kernel and 32-bit userspace? [closed]

  - by osgx

  Which OS (or distributions) comes with 64-bit kernels (x86_64, SPARC64, PPC64, ..smth else?..) and 32-bit userland? I want all small userspace programs (like ls, cat, etc) to be 32-bit, because they really no needs to be 64-bit. But OS kernel must be 64bit for using =3 Gb of RAM. Also database programs (when using a lot of memory) can be 64bit. 64bit mode can hurt some programs, makes them bigger, eating (wasting) memory on pointers (especially in big abstract datatypes like list, tree, etc). 64 bit programss WASTES twice memory on EACH Pointer. I don't want it. And the Question is not "Are the 32-bit programs needed when 64-bit porcessor is available". Question is "What OS comes with 32 bit userspace and kernels in 32/64 bit mode". Examples of such OS includes: Solaris/SPARC64, MACOSX/X86_64 (10.5)/....

  Read the article

• ATI radeon hd 5450 Graphics Card Issues

  - by RGM-79FP GM Striker

  I have an Old Dell Optiplex 755 SFF with an Intel Core 2 Processor (windows 7). Now This can hold a PCI-E x16 port. Now I got an ATI Radeon HD 5450 low profile. I plugged and played and it fits without a hitch, the software installed too! , now for the graphics well... It doesn't really work at all as it seems to freeze at the moment that it loads on the windows logo. It loads into safe mode so I'm not really sure what the problem is. Any ideas, I read the dell forums and they should be somewhat compatible... with the specs so I'm at a loss here. and I am a novice here. Ideas? Edit I have tried to reset the cmos,no luck there. I have tried to move the ram as well. nothing big happened.

  Read the article

• setting visual bell to flash in iTerm

  - by blackwing

  Hi, I am using iTerm on OSX (leopard) to ssh to a linux machine. I run screen on the dev machine to save my work between sessions. I am not a big fan of audio bell and I don't like screen's default 'Wuff Wuff' bell (or any other little message shown at bottom of the page). What I like though is to have flash (foreground and blackground colors swapped for a fraction of a second) as my visual bell. I used to use PuTTY and it is as simple as ticking a checkbox but I can't find such an option in iTerm. My question is how can I set my visual bell to flash? The ideal answer would work with iTerm on local computer, iTerm sshed to a linux server, and iTerm sshed to a linux server and ran screen.

  Read the article

• Three displays, one video card and no eyefinity mode

  - by José F. Romaniello

  I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

  Read the article

• Does multiple files in SQL Server when using RAID help reduce conflicts in growth and file-locking?

  - by Dr Giles M

  I've been reading around and get the impression that if you are using RAID then using multiple SQL Server files within a filegroup won't yeild any more improvements, and the benefits are purely administrative (if you started to run out of space or wanted to partition off data into managable chunks for backups/balancing the data around your big server room). However, being a reasonably savvy software person, it's not unthinkable to hypothesise that, even for smaller databases that SQL Server will perform growth and locking operations (for writes) on a LOGICAL file basis, so even if you are using RAID, it seems to make sense to have multiple files in a file group to balance I/O, or does the time taken to reconstruct the data from distributed filegroups outweigh the benefits of reduced locking? I'm also aware that the behaviour and benefits may be different for tables/indeces/log. Is there a good site that distinguishes the benefits of multiple files when RAID is already in place?

  Read the article

• Coding exercise for Linux Systems Admin?

  - by Prashanth Sundaram

  Hello All, I am preparing for a Systems Admin(linux) role for a big company(top 10 companies) and one of the requisite is knowledge of a language like perl, python or Ruby. I have a phone interview which involves sharing a editor with the interviewer, now what kind of coding exercise can I expect on a phone interview or a regular interview? I have used shell for most of my day-to-day tasks and occasionally Perl and python for bigger tasks. Now I don't expect them to ask Write a script that sync's AD users to LDAP? I don't think data structures, algorithms or sorting questions apply to me role? Can you give me any examples of SysAdmin related coding questions?

  Read the article

• Innodb : cannot allocate the memory for the buffer pool

  - by mingyeow

  My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

  Read the article

• CentOS listen to everything on the wire

  - by Poni

  I know there's a native command on linux that will output (to stdout) every "event" related to a certain network interface (be it eth0 etc'). Like there's tail -f <file> to listen on file changes.. I just can't find it. I want to see all events, incoming packets, even dropped ones. At lowest level possible. In every protocol (TCP, UDP etc'). I think WireShark is a bit too big for this as I need something very simple just to see the events, it's for testing. What's the command?

  Read the article

• Database OR Array

  - by rezoner

  What is the exact point of using external database system if I have simple relations (95% querries are dependant on ID). I am storing users and their stats. Why would I use external database if I can have neat constructions like: db.users[32] = something Array of 500K users is not that big effort for RAM Pros are: no problematic asynchronity (instant results) easy export/import dealing with database like with a native object LITERALLY ps. and considerations: Would it be faster or slower to do collection[3] than db.query("select ... I am going to store it as a file/s There is only ONE application/process accessing this data, and the code is executed line by line - please don't elaborate about locking. Please don't answer with database propositions but why to use external DB over native array/object - I have experience in a few databases - that's not the case. What I am building is a client/gateway/server(s) game. Gateway deals with all users data, processing, authenticating, writing statistics e.t.c No other part of software needs to access directly to this data/database.

  Read the article

• selective backup script in bash

  - by Sake

  Hi, I've been using this simple command (that's all I can do :) to backup the whole tree from my user data in NAS server for a year. cp -r /STORAGE /BACKUP-STORAGE/YYYY-MM-DD Unfortunately, after a year of service. My user start filling the spaces with lot of photo and cliparts (jpg, gif, bmp) And that start to make my backup process get much slower. The space is also a big issue. Now I no longer have enough space for a week-long daily backup set. I think I want to change from backup everything to backup only non-image data. How can I exclude jpg, gif, and bmp from the backup ? It's quite easy with DOS XCOPY command, but I really have no idea how to do that in bash. Thanks

  Read the article

• What is a good programmer's desk? [closed]

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly. The Herman Miller Sense desk looks nice. Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• Meinberg ntp for Windows - force more frequent updates?

  - by ana

  I have a Windows VM that has time drift problems, and left to its own devices will drift by minutes per day. I know there are issues with time on VMs, but I was hoping using the Meinberg NTP service would be successful. It works, generally, in that the time gets corrected in one big step about once every 70mins when it's at about 10mins offset. This has totally confused me as I thought NTP was meant to drift gently back towards the right time, and panic and die if the offset was more than 3 minutes. So (a) what is happening and (b) how do I make it update more regularly?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >