Search Results

Search found 19964 results on 799 pages for 'daniel key'.

Page 150/799 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Is HashMap in Java collision safe

    - by changed
    Hi I am developing a parser that needs to put key value pairs in hashmap. But a key can have multiple values which i can do in this way HashMap<String,ArrayList<String>> . But what happens if number of keys are very large and it start matching with other key's hashcode. Will that rewrite previous key's value ? thanks -devSunday

    Read the article

  • Foreign Keys in SQLITE in the Google Gears framework

    - by Maxim Gershkovich
    Hi all, Could someone please tell me why the following foreign key constraint (although executes fine) is not enforced by SQLITE? Could someone pleasse provide an example of how I can go about enforcing the relationship? CREATE TABLE User (UserID TEXT Unique NOT NULL PRIMARY KEY, FirstName TEXT NOT NULL, LastName TEXT NOT NULL, Username TEXT NOT NULL, Password TEXT NOT NULL, Email TEXT NOT NULL, SignupDate TEXT NOT NULL) CREATE TABLE Category (CategoryID TEXT Unique NOT NULL PRIMARY KEY, UserID TEXT, FOREIGN KEY(UserID) REFERENCES User(UserID))

    Read the article

  • Change|Assign parent for the Model instance on Google App Engine Datastore

    - by Vladimir Prudnikov
    Is it possible to change or assign new parent to the Model instance that already in datastore? For example I need something like this task = db.get(db.Key(task_key)) project = db.get(db.Key(project_key)) task.parent = project task.put() but it doesn't works this way because task.parent is built-in method. I was thinking about creating a new Key instance for the task but there is no way to change key as well. Any thoughts?

    Read the article

  • Basic question about encryption - what exactly are keys?

    - by Tomas
    Hi, I was browsing and found good articles about encryption. However, none of them described why the key lenght is important and what exactly the key is used for. My guess is that could work this way: 0101001101010101010 Key: 01010010101010010101 //the longer the key, the longer unique sequence XOR or smth: //result Is this at least a bit how it works or I am missing something? Thanks

    Read the article

  • Adding keys to superglobals in php

    - by gautam kumar
    Is there any way by which I can add keys to superglobals in php without defining the corresponding values to those key? For example: $_SESSION['key']='set';//key` automatically gets defined. But I want to do something like this add_key($_SESSION,'key')//key is added to $_SESSION array. Is it possible?

    Read the article

  • MySql Alter Syntax error with mulitple FK

    - by acidzombie24
    If i do the first one i have no problem. When i do addition i get a syntax error. What is wrong with the syntax? The error says syntax error near [entire 2nd line] alter table `ban_Status` add FOREIGN KEY (`banned_user`) REFERENCES `user_data`(`id`) alter table `ban_Status` add FOREIGN KEY (`banned_user`) REFERENCES `user_data`(`id`), FOREIGN KEY (`banning_user`) REFERENCES `user_data`(`id`), FOREIGN KEY (`unban_user`) REFERENCES `user_data`(`id`)

    Read the article

  • Why doesn't HashTable.Contains() just simply return false if it is passed a null?

    - by Nate Pinchot
    I understand why passing a null to HashTable.Contains() doesn't work, but I don't understand what the point of it throwing an ArgumentNullException is - instead of just simply returning false? What is the benefit of throwing the exception (other than to make me do null checks before calling .Contains())? Caused By [System.ArgumentNullException] Key cannot be null. Parameter name: key at System.Collections.Hashtable.ContainsKey(Object key) at System.Collections.Hashtable.Contains(Object key)

    Read the article

  • Why is Dictionary.First() so slow?

    - by Rotsor
    Not a real question because I already found out the answer, but still interesting thing. I always thought that hash table is the fastest associative container if you hash properly. However, the following code is terribly slow. It executes only about 1 million iterations and takes more than 2 minutes of time on a Core 2 CPU. The code does the following: it maintains the collection todo of items it needs to process. At each iteration it takes an item from this collection (doesn't matter which item), deletes it, processes it if it wasn't processed (possibly adding more items to process), and repeats this until there are no items to process. The culprit seems to be the Dictionary.Keys.First() operation. The question is why is it slow? Stopwatch watch = new Stopwatch(); watch.Start(); HashSet<int> processed = new HashSet<int>(); Dictionary<int, int> todo = new Dictionary<int, int>(); todo.Add(1, 1); int iterations = 0; int limit = 500000; while (todo.Count > 0) { iterations++; var key = todo.Keys.First(); var value = todo[key]; todo.Remove(key); if (!processed.Contains(key)) { processed.Add(key); // process item here if (key < limit) { todo[key + 13] = value + 1; todo[key + 7] = value + 1; } // doesn't matter much how } } Console.WriteLine("Iterations: {0}; Time: {1}.", iterations, watch.Elapsed); This results in: Iterations: 923007; Time: 00:02:09.8414388. Simply changing Dictionary to SortedDictionary yields: Iterations: 499976; Time: 00:00:00.4451514. 300 times faster while having only 2 times less iterations. The same happens in java. Used HashMap instead of Dictionary and keySet().iterator().next() instead of Keys.First().

    Read the article

  • git clone with ssh issue

    - by george
    Hi, I have generated a public key, private key pair. I've set the public key to the site. How to use the console in windows to clone a git repository? What do I do with the private key? I keep getting: the remote end hung up unexp. Thanks

    Read the article

  • How can I map a String to a function in Java?

    - by Bears will eat you
    Currently, I have a bunch of Java classes that implement a Processor interface, meaning they all have a processRequest(String key) method. The idea is that each class has a few (say, <10) member Strings, and each of those maps to a method in that class via the processRequest method, like so: class FooProcessor implements Processor { String key1 = "abc"; String key2 = "def"; String key3 = "ghi"; // and so on... String processRequest(String key) { String toReturn = null; if (key1.equals(key)) toReturn = method1(); else if (key2.equals(key)) toReturn = method2(); else if (key3.equals(key)) toReturn = method3(); // and so on... return toReturn; } String method1() { // do stuff } String method2() { // do other stuff } String method3() { // do other other stuff } // and so on... } You get the idea. This was working fine for me, but now I need a runtime-accessible mapping from key to function; not every function actually returns a String (some return void) and I need to dynamically access the return type (using reflection) of each function in each class that there's a key for. I already have a manager that knows about all the keys, but not the mapping from key to function. My first instinct was to replace this mapping using if-else statements with a Map<String, Function>, like I could do in Javascript. But, Java doesn't support first-class functions so I'm out of luck there. I could probably dig up a third-party library that lets me work with first-class functions, but I haven't seen any yet, and I doubt that I need an entire new library. I also thought of putting these String keys into an array and using reflection to invoke the methods by name, but I see two downsides to this method: My keys would have to be named the same as the method - or be named in a particular, consistent way so that it's easy to map them to the method name. This seems WAY slower than the if-else statements I have right now. Efficiency is something of a concern because these methods will tend to get called pretty frequently, and I want to minimize unnecessary overhead. TL; DR: I'm looking for a clean, minimal-overhead way to map a String to some sort of a Function object that I can invoke and call (something like) getReturnType() on. I don't especially mind using a 3rd-party library if it really fits my needs. I also don't mind using reflection, though I would strongly prefer to avoid using reflection every single time I do a method lookup - maybe using some caching strategy that combines the Map with reflection. Thoughts on a good way to get what I want? Cheers!

    Read the article

  • Des Encrypion...

    - by SunilRai86
    i have done Des encryption which requires 64 bit key .the main problem is that when i insert any 64 bit key it decrypted .(the key used in encryption and the key for decryption is not same).

    Read the article

  • C# - Inserting and Removing from Cache

    - by Nir
    1 - If I insert to Cache by assigning the value: Cache["key"] = value; what's the expiration time? 2 - Removing the same value from Cache: I want to check if the value is in Cache by if(Cache["key"]!=null), is it better to remove it from Cache by Cache.Remove("key") or Cache["key"]=null ?

    Read the article

  • Does UNIQ constraint mean also an index on that field(s)?

    - by Gremo
    As title, should i defined a separate index on email column (for searching purposes) or the index is "automatically" added along with UNIQ_EMAIL_USER constraint? CREATE TABLE IF NOT EXISTS `customer` ( `id` int(11) NOT NULL AUTO_INCREMENT, `user_id` int(11) NOT NULL, `first` varchar(255) NOT NULL, `last` varchar(255) NOT NULL, `slug` varchar(255) NOT NULL, `email` varchar(255) NOT NULL, `created_at` datetime NOT NULL, `updated_at` datetime NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `UNIQ_SLUG` (`slug`), UNIQUE KEY `UNIQ_EMAIL_USER` (`email`,`user_id`), KEY `IDX_USER` (`user_id`) ) ENGINE=InnoDB;

    Read the article

  • Replace a method call

    - by deV
    Hi, I want to achieve below task: 1. I need to search Html.Resource("key") in my application and replace it with GetResource("key",object) 2. The GetResource method has two parameters: the first parameter should be the same as the original method,"key" in this case, and I need to pass in the second parameter which is variable. 3. I need to replace only when the Html.Resource("key") occurs inside certain tags like td and div else I need not replace it. Thanks in advance

    Read the article

  • SQL Alter: add multiple FKs?

    - by acidzombie24
    From here ALTER TABLE ORDERS ADD FOREIGN KEY (customer_sid) REFERENCES CUSTOMER(SID); How do i add several keys with SQL Server? is it something like the below? (I cant test ATM and unfortunately i have no way to test queries unless i run it through code) ALTER TABLE ORDERS ADD FOREIGN KEY (customer_sid) REFERENCES CUSTOMER(SID), ADD FOREIGN KEY (customer_sid2) REFERENCES CUSTOMER(SID2); or is it like ALTER TABLE ORDERS ADD FOREIGN KEY (customer_sid, customer_sid2) REFERENCES CUSTOMER(SID, SID2)

    Read the article

  • Looking for Linux text editor

    - by Daniel
    I'm looking for VIM replacement. My key points are: Extensible in sane language (such as Python, Ruby, or even Lua, after vimscript everything will do). Also GUI part should be extensible too, so no SublimeText2. GUI. Preferrably GTK+. Lightweight. I don't understand IDEs like Eclipse/NetBeans consuming up to 1G of RAM. File browser panel. Splits, tabs and windows. There should be ability to split views tabs infinite number of times (or while they fit to screen). VCS support (optional: especially Git) Snippets & autocompletion (not mandatory, but I would very love to have those) Any ideas?

    Read the article

  • How can I boot Ubuntu 10.04 on my MacBook Pro from a USB hard drive?

    - by Daniel Huckstep
    I installed Ubuntu 10.04 to my MacBook Pro (not the latest gen with i7, but one before that) on an external, USB harddrive (GRUB installed to the external as well). When I hold down the option key to try to select the external, it doesn't show up. After some looking around, my understanding is that it won't boot 'unsupported' operating system from an external drive. I have ran OSX from an external when I upgraded my harddrive. What can I do (or is it even possible) to allow my MacBook Pro to boot the Ubuntu drive?

    Read the article

  • IIS SSL Certificate Renewal Pain

    - by Rick Strahl
    I’m in the middle of my annual certificate renewal for the West Wind site and I can honestly say that I hate IIS’s certificate system.  When it works it’s fine, but when it doesn’t man can it be a pain. Because I deal with public certificates on my site merely once a year, and you have to perform the certificate dance just the right way, I seem to run into some sort of trouble every year, thinking that Microsoft surely must have addressed the issues I ran into previously – HA! Not so. Don’t ever use the Renew Certificate Feature in IIS! The first rule that I should have never forgotten is that certificate renewals in IIS (7 is what I’m using but I think it’s no different in 7.5 and 8), simply don’t work if you’re submitting to get a public certificate from a certificate authority. I use DNSimple for my DNS domain management and SSL certificates because they provide ridiculously easy domain management and good prices for SSL certs – especially wildcard certificates, which is what I use on west-wind.com. Certificates in IIS can be found pegged to the machine root. If you go into the IIS Manager, go to the machine root the tree and then click on certificates and you then get various certificate options: Both of these options create a new Certificate request (CSR), which is just a text file. But if you’re silly enough like me to click on the Renew button on your old certificate, you’ll find that you end up generating a very long Certificate Request that looks nothing like the original certificate request and the format that’s used for this is not accepted by most certificate authorities. While I’m not sure exactly what the problem is, it simply looks like IIS is respecting none of your original certificate bit size choices and is generating a huge certificate request that is 3 times the size of a ‘normal’ certificate request. The end result is (and I’ve done this at least twice now) is that the certificate processor is likely to fail processing those renewals. Always create a new Certificate While it’s a little more work and you have to remember how to fill out the certificate request properly, this is the safe way to make sure your certificate generates properly. First comes the Distinguished Name Properties dialog: Ah yes you have to love the nomenclature of this stuff. Distinguished name, Common name – WTF is a common name? It doesn’t look common to me! Make sure this form gets filled out correctly. Common NameThis is the domain name of the Web site. In my case I’m creating a wildcard certificate so I’m using the * prefix. If you’re purchasing a certificate for a specific domain use www.west-wind.com or store.west-wind.com for example. Make sure this matches the EXACT domain you’re trying to use secure access on because that’s all the certificate is going to work on unless you get a wildcard certificate. Organization Is the name of your company or organization. Depending on the kind of certificate you purchase this name will show up on your certificate. Most low end SSL certificates (ie. those that cost under $100 for single domains) don’t list the organization, the higher signature certificates that also require extensive validation by the cert authority do. Regardless you should make sure this matches the right company/organization. Organizational Unit This can be anything. Not really sure what this is for, but traditionally I’ve always set this to Web because – well this is a Web thing after all right? I’ve never seen this used anywhere that I can tell other than to internally reference the cert. State and CountryPretty obvious. Should reflect the location of the business/organization/person or site.   Next you have to configure the bit size used for the certificate: The default on this dialog is 1024, but I’ve found that most providers these days request a minimum bit length of 2048, as did my DNSimple provider. Again check with the provider when you submit to make sure. Bit length mismatches can cause problems if you use a size that isn’t supported by the provider. I had that happen last year when I submitted my CSR and it got rejected quite a bit later, when the certs usually are issued within an hour or less. When you’re done here, the certificate is saved to disk as a .txt file and it should look something like this (this is a 2048 bit length CSR):-----BEGIN NEW CERTIFICATE REQUEST----- MIIEVGCCAz0CAQAwdjELMAkGA1UEBhMCVVMxDzANBgNVBAgMBkhhd2FpaTENMAsG A1UEBwwEUGFpYTEfMB0GA1UECgwWV2VzdCBXaW5kIFRlY2hub2xvZ2llczEMMAoG B1UECwwDV2ViMRgwFgYDVQQDDA8qLndlc3Qtd2luZC5jb20wggEiMA0GCSqGSIb3 DQEBAQUAA4IBDwAwggEKAoIBAQDIPWOFMkMVRp2Ftj9w/cCVV4OYYhoZYtl+8lTk oqDwKca0xWHLgioX/9v0rZLS6a82MHqKEBxVXu+cuCmSE4AQtB/1YH9lS4tpc/be OZDvnTotP6l4MCEzzAfROcw4CiIg6X0RMSnl8IATAvv2V5LQM9TDdt9oDdMpX2IY +vVC9RZ7PMHBmR9kwI2i/lrKitzhQKaHgpmKcRlM6iqpALUiX28w5HJaDKK1MDHN 607tyFJLHijuJKx7PdTqZYf50KkC3NupfZ2avVycf18Q13jHWj59tvwEOczoVzRL l4LQivAqbhyiqMpWnrZunIOUZta5aGm+jo7O1knGWJjxuraTAgMBAAGgggGYMBoG CisGAQQBgjcNAgMxDBYKNi4yLjkyMDAuMjA0BgkrBgEEAYI3FRQxJzAlAgEFDAZS QVNYUFMMC1JBU1hQU1xSaWNrDAtJbmV0TWdyLmV4ZTByBgorBgEEAYI3DQICMWQw YgIBAR5aAE0AaQBjAHIAbwBzAG8AZgB0ACAAUgBTAEEAIABTAEMAaABhAG4AbgBl AGwAIABDAHIAeQBwAHQAbwBnAHIAYQBwAGgAaQBjACAAUAByAG8AdgBpAGQAZQBy AwEAMIHPBgkqhkiG9w0BCQ4xgcEwgb4wDgYDVR0PAQH/BAQDAgTwMBMGA1UdJQQM MAoGCCsGAQUFBwMBMHgGCSqGSIb3DQEJDwRrMGkwDgYIKoZIhvcNAwICAgCAMA4G CCqGSIb3DQMEAgIAgDALBglghkgBZQMEASowCwYJYIZIAWUDBAEtMAsGCWCGSAFl AwQBAjALBglghkgBZQMEAQUwBwYFKw4DAgcwCgYIKoZIhvcNAwcwHQYDVR0OBBYE FD/yOsTbXE+GVFCFMmldzQvyloz9MA0GCSqGSIb3DQEBBQUAA4IBAQCK6LlsCuIM 1AU0niB6QZ9v0FTsGFxP1dYvVUnJyY6VEKNiGFiQjZac7UCs0p58yScdXWEFOE8V OsjAYD3xYNc05+ckyD67UHRGEUAVB9RBvbKW23KeR/8kBmEzc8PemD52YOgExxAJ 57xWmAwEHAvbgYzQvhO8AOzH3TGvvHbg5UKM1pYgNmuwZq5DkL/IDoeIJwfk/wrI wghNTuxxIFgbH4YrgLgv4PRvrS/LaTCRBdboaCgzATMczaOb1nd/DVNR+3fCtMhM W0psTAjzRbmXF3nJyAQa7jF/52gkY0RfFX2lG5tJnG+XDsVNvKNvh9Qa5Tlmkm06 ILKCm9ciWCKk -----END NEW CERTIFICATE REQUEST----- You can take that certificate request and submit that to your certificate provider. Since this is base64 encoded you can typically just paste it into a text box on the submission page, or some providers will ask you to upload the CSR as a file. What does a Renewal look like? Note the length of the CSR will vary somewhat with key strength, but compare this to a renewal request that IIS generated from my existing site:-----BEGIN NEW CERTIFICATE REQUEST----- MIIPpwYFKoZIhvcNAQcCoIIPmDCCD5QCAQExCzAJBgUrDgMCGgUAMIIIqAYJKoZI hvcNAQcBoIIImQSCCJUwggiRMIIH+gIBADBdMSEwHwYDVQQLDBhEb21haW4gQ29u dHJvbCBWYWxpFGF0ZWQxHjAcBgNVBAsMFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEY MBYGA1UEAwwPKi53ZXN0LXdpbmQuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQCK4OuIOR18Wb8tNMGRZiD1c9X57b332Lj7DhbckFqLs0ys8kVDHrTXSj+T Ye9nmAvfPpZmBtE5p9qRNN79rUYugAdl+qEtE4IJe1bRfxXzcKa1SXa8+TEs3zQa zYSmcR2dDuC8om1eAdeCtt0NnkvANgm1VLwGOor/UHMASaEhCQIDAQABoIIG8jAa BgorBgEEAYI3DQIDMQwWCjYuMi45MjAwLjIwNAYJKwYBBAGCNxUUMScwJQIBBQwG UkFTWFBTDAtSQVNYUFNcUmljawwLSW5ldE1nci5leGUwZgYKKwYBBAGCNw0CAjFY MFYCAQIeTgBNAGkAYwByAG8AcwBvAGYAdAAgAFMAdAByAG8AbgBnACAAQwByAHkA cAB0AG8AZwByAGEAcABoAGkAYwAgAFAAcgBvAHYAaQBkAGUAcgMBADCCAQAGCSqG SIb3DQEJDjGB8jCB7zAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIwADA0BgNV HSUELTArBggrBgEFBQcDAQYIKwYBBQUHAwIGCisGAQQBgjcKAwMGCWCGSAGG+EIE ATBPBgNVHSAESDBGMDoGCysGAQQBsjEBAgIHMCswKQYIKwYBBQUHAgEWHWh0dHBz Oi8vc2VjdXJlLmNvbW9kby5jb20vQ1BTMAgGBmeBDAECATApBgNVHREEIjAggg8q Lndlc3Qtd2luZC5jb22CDXdlc3Qtd2luZC5jb20wHQYDVR0OBBYEFEVLAyO8gDiv lsfovKrx9mHPyrsiMIIFMAYJKwYBBAGCNw0BMYIFITCCBR0wggQFoAMCAQICEQDu 1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRsw GQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAY BgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wg Q0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUwNjA2MjM1OTU5WjBdMSEwHwYDVQQLExhE b21haW4gQ29udHJvbCBWYWxpZGF0ZWQxHjAcBgNVBAsTFUVzc2VudGlhbFNTTCBX aWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0LXdpbmQuY29tMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66XB51DlUfm6xXqJBcvMU2qorRHxC+WjEpB amvg8XoqNfCKzDAvLMbY4BLhbYCTagqtslnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJM CHufZ5RDtuTuxhTdJxzP9YqZUfKV5abWQp/TK6V1ryaBJvdqM73q4tRjrQODtkiR PfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8 UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+wDNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfO a7iZMVGbqDg6rkS//2uGe6tSQJTTs+mAZB+na+M8XT2UqwIDAQABo4IBwTCCAb0w HwYDVR0jBBgwFoAU2svqrVsIXcz//CZUzknlVcY49PgwHQYDVR0OBBYEFH0AmLiL RSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQG A1UdJQQtMCsGCCsGAQUFBwMBBggrBgEFBQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4 QgQBME8GA1UdIARIMEYwOgYLKwYBBAGyMQECAgcwKzApBggrBgEFBQcCARYdaHR0 cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9DUFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIw MKAuoCyGKmh0dHA6Ly9jcmwuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBLmNy bDBuBggrBgEFBQcBAQRiMGAwOAYIKwYBBQUHMAKGLGh0dHA6Ly9jcnQuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBXzIuY3J0MCQGCCsGAQUFBzABhhhodHRwOi8v b2NzcC5jb21vZG9jYS5jb20wKQYDVR0RBCIwIIIPKi53ZXN0LXdpbmQuY29tgg13 ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQBqBfd6QHrxXsfgfKARG6np 8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8 YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXSsBxBdNz8RYTthPMu1h09C0XuDB30sztg nR692FrxJN5/bXsk+MC9nEweTFW/t2HW+XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lD csZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0tCbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk 9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlcrfFP2PK7XcEwWizsvMrNqLyvQVNXSUPT MA0GCSqGSIb3DQEBBQUAA4GBABt/NitwMzc5t22p5+zy4HXbVYzLEjesLH8/v0ot uLQ3kkG8tIWNh5RplxIxtilXt09H4Oxpo3fKUN0yw+E6WsBfg0sAF8pHNBdOJi48 azrQbt4HvKktQkGpgYFjLsormjF44SRtToLHlYycDHBNvjaBClUwMCq8HnwY6vDq xikRoIIFITCCBR0wggQFoAMCAQICEQDu1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3 DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0 ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVk MRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wgQ0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUw NjA2MjM1OTU5WjBdMSEwHwYDVQQLExhEb21haW4gQ29udHJvbCBWYWxpZGF0ZWQx HjAcBgNVBAsTFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0 LXdpbmQuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66X B51DlUfm6xXqJBcvMU2qorRHxC+WjEpBamvg8XoqNfCKzDAvLMbY4BLhbYCTagqt slnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJMCHufZ5RDtuTuxhTdJxzP9YqZUfKV5abW Qp/TK6V1ryaBJvdqM73q4tRjrQODtkiRPfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d 9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+w DNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfOa7iZMVGbqDg6rkS//2uGe6tSQJTTs+mA ZB+na+M8XT2UqwIDAQABo4IBwTCCAb0wHwYDVR0jBBgwFoAU2svqrVsIXcz//CZU zknlVcY49PgwHQYDVR0OBBYEFH0AmLiLRSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB /wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQGA1UdJQQtMCsGCCsGAQUFBwMBBggrBgEF BQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4QgQBME8GA1UdIARIMEYwOgYLKwYBBAGy MQECAgcwKzApBggrBgEFBQcCARYdaHR0cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9D UFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIwMKAuoCyGKmh0dHA6Ly9jcmwuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBLmNybDBuBggrBgEFBQcBAQRiMGAwOAYIKwYB BQUHMAKGLGh0dHA6Ly9jcnQuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBXzIu Y3J0MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5jb21vZG9jYS5jb20wKQYDVR0R BCIwIIIPKi53ZXN0LXdpbmQuY29tgg13ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEB BQUAA4IBAQBqBfd6QHrxXsfgfKARG6np8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe 4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXS sBxBdNz8RYTthPMu1h09C0XuDB30sztgnR692FrxJN5/bXsk+MC9nEweTFW/t2HW +XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lDcsZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0t CbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlc rfFP2PK7XcEwWizsvMrNqLyvQVNXSUPTMYIBrzCCAasCAQEwgYcwcjELMAkGA1UE BhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2Fs Zm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxGDAWBgNVBAMTD0Vzc2Vu dGlhbFNTTCBDQQIRAO7UTVPkm+2Sbks59IdptaUwCQYFKw4DAhoFADANBgkqhkiG 9w0BAQEFAASCAQB8PNQ6bYnQpWfkHyxnDuvNKw3wrqF2p7JMZm+SuN2qp3R2LpCR mW2LrGtQIm9Iob/QOYH+8houYNVdvsATGPXX2T8gzn+anof4tOG0vCTK1Bp9bwf9 MkRP+1c8RW/vkYmUW4X5/C+y3CZpMH5dDTaXBIpXFzjX/fxNpH/rvLzGiaYYL3Cn OLO+aOADr9qq5yoqwpiYCSfYNNYKTUNNGfYIidQwYtbHXEYhSukB2oR89xD2sZZ4 bOqFjUPgTa5SsERLDDeg3omMKiIXVYGxlqBEq51Kge6IQt4qQV9P9VgInW7cWmKe dTqNHI9ri3ttewdEnT++TKGKKfTjX9SR8Waj -----END NEW CERTIFICATE REQUEST----- Clearly there’s something very different between this an my original request! And it didn’t work. IIS creates a custom CSR that is encoded in a format that no certificate authority I’ve ever used uses. If you want the gory details of what’s in there look at this ServerFault question (thanks to Mika in the comments). In the end it doesn’t matter  though – no certificate authority knows what to do with this CSR. So create a new CSR and skip the renewal. Always! Use the same Server Keep in mind that on IIS at least you should always create your certificate on a single server and then when you receive the final certificate from your provider import it on that server. IIS tracks the CSR it created and requires it in order to import the final certificate properly. So if for some reason you try to install the certificate on another server, it won’t work. I’ve also run into trouble trying to install the same certificate twice – this time around I didn’t give my certificate the proper friendly name and IIS failed to allow me to assign the certificate to any of my Web sites. So I removed the certificate and tried to import again, only to find it failed the second time around. There are other ways to fix this, but in my case I had to have the certificate re-issued to work – not what you want to do. Regardless of what you do though, when you import make sure you do it right the first time by crossing all your t’s and dotting your i's– it’ll save you a lot of grief! You don’t actually have to use the server that the certificate gets installed on to generate the CSR and first install it, but it is generally a good idea to do so just so you can get the certificate installed into the right place right away. If you have access to the server where you need to install the certificate you might as well use it. But you can use another machine to generated the and install the certificate, then export the certificate and move it to another machine as needed. So you can use your Dev machine to create a certificate then export it and install it on a live server. More on installation and back up/export later. Installing the Certificate Once you’ve submitted a CSR request your provider will process the request and eventually issue you a new final certificate that contains another text file with the final key to import into your certificate store. IIS does this by combining the content in your certificate request with the original CSR. If all goes well your new certificate shows up in the certificate list and you’re ready to assign the certificate to your sites. Make sure you use a friendly name that matches domain name of your site. So use *.mysite.com or www.mysite.com or store.mysite.com to ensure IIS recognizes the certificate. I made the mistake of not naming my friendly name this way and found that IIS was unable to link my sites to my wildcard certificate. It needed to have the *. as part of the certificate otherwise the Hostname input field was blanked out. Changing the Friendly Name If you by accidentally used an invalid friendly name you can change it later in the Windows certificate store. Bring up a Run Box Type MMC File | Add/Remove Snap In Add Certificates | Computer Account | Local Computer Drill into Certificates | Personal | Certificates Find your Certificate | Right Click | Properties Edit the Friendly Name | Click OK Backing up your Certificate The first thing you should do once your certificate is successfully installed is to back it up! In case your server crashes or you otherwise lose your configuration this will ensure you have an easy way to recover and reinstall your certificate either on the same server or a different one. If you’re running a server farm or using a wildcard certificate you also need to get the certificate onto other machines and a PFX file import is the easiest way to do this. To back up your certificate select your certificate and choose Export from the context or sidebar menu: The Export Certificate option allows you to export a password protected binary file that you can import in a single step. You can copy the resulting binary PFX file to back up or copy to other machines to install on. Importing the certificate on another machine is as easy as pointing at the PFX file and specifying the password. IIS handles the rest. Assigning a new certificate to your Site Once you have the new certificate installed, all that’s left to do is assign it to your site. In IIS select your Web site and bring up the Site Bindings from the right sidebar. Add a new binding for https, bind it to port 443, specify your hostname and pick the certificate from the pick list. If you’re using a root site make sure to set up your certificate for www.yoursite.com and also for yoursite.com so that both work properly with SSL. Note that you need to explicitly configure each hostname for a certificate if you plan to use SSL. Luckily if you update your SSL certificate in the following year, IIS prompts you and asks whether you like to update all other sites that are using the existing cert to the newer cert. And you’re done. So what’s the Pain? So, all of this is old hat and it doesn’t look all that bad right? So what’s the pain here? Well if you follow the instructions and do everything right, then the process is about as straight forward as you would expect it to be. You create a cert request, you import it and assign it to your sites. That’s the basic steps and to be perfectly fair it works well – if nothing goes wrong. However, renewing tends to be the problem. The first unintuitive issue is that you simply shouldn’t renew but create a new CSR and generate your new certificate from that. Over the years I’ve fallen prey to the belief that Microsoft eventually will fix this so that the renewal creates the same type of CSR as the old cert, but apparently that will just never happen. Booo! The other problem I ran into is that I accidentally misnamed my imported certificate which in turn set off a chain of events that caused my originally issued certificate to become uninstallable. When I received my completed certificate I installed it and it installed just fine, but the friendly name was wrong. As a result IIS refused to assign the certificate to any of my host headered sites. That’s strike number one. Why the heck should the friendly name have any effect on the ability to attach the certificate??? Next I uninstalled the certificate because I figured that would be the easiest way to make sure I get it right. But I found that I could not reinstall my certificate. I kept getting these stop errors: "ASN1 bad tag value met" that would prevent the installation from completion. After searching around for this error and reading countless long messages on forums, I found that this error supposedly does not actually mean the install failed, but the list wouldn’t refresh. Commodo has this to say: Note: There is a known issue in IIS 7 giving the following error: "Cannot find the certificate request associated with this certificate file. A certificate request must be completed on the computer where it was created." You may also receive a message stating "ASN1 bad tag value met". If this is the same server that you generated the CSR on then, in most cases, the certificate is actually installed. Simply cancel the dialog and press "F5" to refresh the list of server certificates. If the new certificate is now in the list, you can continue with the next step. If it is not in the list, you will need to reissue your certificate using a new CSR (see our CSR creation instructions for IIS 7). After creating a new CSR, login to your Comodo account and click the 'replace' button for your certificate. Not sure if this issue is fixed in IIS 8 but that’s an insane bug to have crop up. As it turns out, in my case the refresh didn’t work and the certificate didn’t show up in the IIS list after the reinstall. In fact when looking at the certificate store I could see my certificate was installed in the right place, but the private key is missing which is most likely why IIS is not picking it up. It looks like IIS could not match the final cert to the original CSR generated. But again some sort of message to that affect might be helpful instead of ASN1 bad tag value met. Recovering the Private Key So it turns out my original problem was that I received the published key, but when I imported the private key was missing. There’s a relatively easy way to recover from this. If your certificate doesn’t show up in IIS check in the certificate store for the local machine (see steps above on how to bring this up). If you look at the certificate in Certificates/Personal/Certificates make sure you see the key as shown in the image below: if the key is missing it means that the certificate is missing the private key most likely. To fix a certificate you can do the following: Double click the certificate Go to the Details Tab Copy down the Serial number You can copy the serial number from the area blurred out above. The serial number will be in a format like ?00 a7 9b a1 a4 9d 91 63 57 d6 9f 26 b8 ee 79 b5 cb and you’ll need to strip out the spaces in order to use it in the next step. Next open up an Administrative command prompt and issue the following command: certutil -repairstore my 00a79ba1a49d916357d69f26b8ee79b5cb You should get a confirmation message that the repair worked. If you now go back to the certificate store you should now see the key icon show up on the certificate. Your certificate is fixed. Now go back into IIS Manager and refresh the list of certificates and if all goes well you should see all the certificates that showed in the cert store now: Remember – back up the key first then map to your site… Summary I deal with a lot of customers who run their own IIS servers, and I can’t tell you how often I hear about botched SSL installations. When I posted some of my issues on Twitter yesterday I got a hell storm of “me too” responses. I’m clearly not the only one, who’s run into this especially with renewals. I feel pretty comfortable with IIS configuration and I do a lot of it for support purposes, but the SSL configuration is one that never seems to go seamlessly. This blog post is meant as reminder to myself to read next time I do a renewal. So I can dot my i's and dash my t’s before I get caught in the mess I’m dealing with today. Hopefully some of you find this useful as well.© Rick Strahl, West Wind Technologies, 2005-2014Posted in IIS7  Security   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • ssh authentication nfs

    - by user40135
    Hi all I would like to do ssh from machine "ub0" to another machine "ub1" without using passwords. I setup using nfs on "ub0" but still I am asked to insert a password. Here is my scenario: * machine ub0 and ub1 have the same user "mpiu", with same pwd, same userid, and same group id * the 2 servers are sharing a folder that is the HOME directory for "mpiu" * I did a chmod 700 on the .ssh * I created a key using ssh-keygene -t dsa * I did "cat id_dsa.pub authorized_keys". On this last file I tried also chmod 600 and chmod 640 * off course I can guarantee that on machine ub1 the user "shared_user" can see the same fodler that wes mounted with no problem. Below the content of my .ssh folder Code: authorized_keys id_dsa id_dsa.pub known_hosts After all of this calling wathever function "ssh ub1 hostname" I am requested my password. Do you know what I can try? I also UNcommented in the ssh_config file for both machines this line IdentityFile ~/.ssh/id_dsa I also tried ssh -i $HOME/.ssh/id_dsa mpiu@ub1 Below the ssh -vv Code: OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ub1 [192.168.2.9] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /mirror/mpiu/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version lshd-2.0.4 lsh - a GNU ssh debug1: no match: lshd-2.0.4 lsh - a GNU ssh debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,spki-sign-rsa debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server-client 3des-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client-server 3des-cbc hmac-md5 none debug2: dh_gen_key: priv key bits set: 183/384 debug2: bits set: 1028/2048 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'ub1' is known and matches the RSA host key. debug1: Found key in /mirror/mpiu/.ssh/known_hosts:1 debug2: bits set: 1039/2048 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /mirror/mpiu/.ssh/id_dsa (0xb874b098) debug1: Authentications that can continue: password,publickey debug1: Next authentication method: publickey debug1: Offering public key: /mirror/mpiu/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: password,publickey debug2: we did not send a packet, disable method debug1: Next authentication method: password mpiu@ub1's password: I hangs here!

    Read the article

  • Symfony fk issue on insertion

    - by Daniel Hertz
    Hi, I posted a similar problem but it could not be resolved. I create a relational database of users and groups but for some reason I cannot insert test data with fixtures properly. Here is a sample of the schema: User: actAs: { Timestampable: ~ } columns: name: { type: string(255), notnull: true } email: { type: string(255), notnull: true, unique: true } nickname: { type: string(255), unique: true } password: { type: string(300), notnull: true } image: { type: string(255) } Group: actAs: { Timestampable: ~ } columns: name: { type: string(500), notnull: true } image: { type: string(255) } type: { type: string(255), notnull: true } created_by_id: { type: integer } relations: User: { onDelete: SET NULL, class: User, local: created_by_id, foreign: id, foreignAlias: groups_created } FanOf: actAs: { Timestampable: ~ } columns: user_id: { type: integer, primary: true } group_id: { type: integer, primary: true } relations: User: { onDelete: CASCADE, local: user_id, foreign: id, foreignAlias: fanhood } Group: { onDelete: CASCADE, local: group_id, foreign: id, foreignAlias: fanhood } And this is the data i try to input: User: user1: name: Danny email: [email protected] nickname: danny password: f05050400c5e586fa6629ef497be Group: group1: name: Mets type: sports FanOf: fans1: user_id: user1 group_id: group1 I keep getting this error: SQLSTATE[23000]: Integrity constraint violation: 1452 Cannot add or update a child row: a foreign key constraint fails (`krowdd`.`fan_of`, CONSTRAINT `fan_of_user_id_user_id` FOREIGN KEY (`user_id`) REFERENCES `user` (`id`) ON DELETE CASCADE) The users and groups are clearly being created before the "fanhood" is so why am I getting this error?? Thanks!

    Read the article

  • Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

    - by Daniel Lackey
    My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others.   For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J   The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface.   The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next.           Leave everything on the Localization tab default and click Next.   On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute.       The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next.    On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next.   On the ‘Localization’ tab, click Next.   On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete.   Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes.         Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see:       First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder.   Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this:       Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file.   Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done!   Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below:       Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs.   <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

    Read the article

  • Example WLST Script to Obtain JDBC and JTA MBean Values

    - by Daniel Mortimer
    Introduction Following on from the blog entry "Get an Offline or Online WebLogic Domain Summary Using WLST!", I have had a request to create a smaller example which only collects a selection of JDBC (System Resource) and JTA configuration and runtime MBeans values. So, here it is. Download Sample Script You can grab the sample script by clicking here. Instructions to Run: 1. After download, extract the zip to the machine hosting the WebLogic environment. You should have three directories along with a readme.txt output Sample_Output scripts 2. In the scripts directory, find the start wrapper script startWLSTJDBCSummarizer.sh (Unix) or startWLSTJDBCSummarizer.cmd (MS Windows). Open the appropriate file in an editor and change the environment variable settings to suit your system. Example - startWLSTDomainSummarizer.cmd set WL_HOME=D:\product\FMW11g\wlserver_10.3 set DOMAIN_HOME=D:\product\FMW11g\user_projects\domains\MyDomain set WLST_OUTPUT_PATH=D:\WLSTDomainSummarizer\output\ set WLST_OUTPUT_FILE=WLST_JDBC_Summary_Via_MBeans.html call "%WL_HOME%\common\bin\wlst.cmd" WLS_JDBC_Summary_Online.py Note: The WLST_OUTPUT_PATH directory value must have a trailing slash. If there is no trailing slash, the script will error and not continue.  3. Run the shell / command line wrapper script. It should launch WLST and kick off "WLS_JDBC_Summary_Online.py". This will hit you with some prompts e.g. Is your domain Admin Server up and running and do you have the connection details? (Y /N ): Y Enter connection URL to Admin Server e.g t3://mymachine.acme.com:7001 : t3://localhost:7001 Enter weblogic username: weblogic Enter weblogic username password (function prompt 1): welcome1 (Note: the value typed in for password will not be echoed back to the console). 4. If the scripts run successfully, you should get a HTML summary in the specified output directory. See example screenshots below: Screenshot 1 - JDBC System Resource Tab Page  Screenshot 2 - JTA Tab Page 5. For the HTML to render correctly, ensure the .js and .css files provided (review the output directory created by the zip file extraction) are accessible. For example, to view the HTML locally (without using a web server), place the HTML output, jquery-ui.js, spry.js and wlstsummarizer.css in the same directory. Disclaimer This is a sample script. I have tested it against WebLogic Server 10.3.6 domains on MS Windows and Unix.  I cannot guarantee that the script will run error free or produce the expected output on your system. If you have any feedback add a comment to the blog. I will endeavour to fix any problems with my WLST code. Credits JQuery: http://jquery.com/ Spry (Adobe) : https://github.com/adobe/Spryhttp://www.red-team-design.com/cool-headings-with-pseudo-elements

    Read the article

  • Objective-C As A First OOP Language?

    - by Daniel Scocco
    I am just finishing the second semester of my CS degree. So far I learned C, all the fundamental algorithms and data structures (e.g., searching, sorting, linked lists, heaps, hash tables, trees, graphs, etc). Next year we'll start with OOP, using either Java or C++. Recently I got some ideas for some iPhone apps and got itchy to start working on them. However I heard some bad things about Objectice-C in the past, so I am wondering if learning it as my first OOP language could be a problem. Not to mention that I think it will be hard to find books/online courses that teach basic OOP concepts using Objective-C to illustrate the concepts (as opposed to books using Java or C++, which are plenty), so this could be another problem. In summary: should I start learning Objective-C and OOP concepts right now by my own, or wait one more semester until I learn Java/C++ at university and then jump into Objective-C? Update: For those interested in getting started with OOP via Objective-C I just found some nice tutorials inside Apple's Developer Library - http://developer.apple.com/library/mac/#documentation/Cocoa/Conceptual/OOP_ObjC/Introduction/Introduction.html

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

  • How do I install 32-bit perl-tgicl 2.1.1?

    - by Daniel Fernandez
    I'm trying to install a .deb and I need some packages but they are not on the synaptic. How can I install this packages lib32z1 libc6-i386 TGICL$ sudo dpkg -i perl-tgicl_2.1-1_all.deb Selecting previously deselected package perl-tgicl. (Reading database ... 168515 files and directories currently installed.) Unpacking perl-tgicl (from perl-tgicl_2.1-1_all.deb) ... dpkg: dependency problems prevent configuration of perl-tgicl: perl-tgicl depends on lib32z1 (>= 1:1.1.4); however: Package lib32z1 is not installed. perl-tgicl depends on libc6-i386 (>= 2.3); however: Package libc6-i386 is not installed. perl-tgicl depends on libfile-homedir-perl (>= 0.10); however: Package libfile-homedir-perl is not installed. perl-tgicl depends on libfile-spec-perl (>= 0.10); however: Package libfile-spec-perl is not installed. dpkg: error processing perl-tgicl (--install): dependency problems - leaving unconfigured Processing triggers for man-db ... Errors were encountered while processing: perl-tgicl My OS: $ uname -a Linux 3.0.0-12-generic-pae #20-Ubuntu SMP Fri Oct 7 16:37:17 UTC 2011 i686 i686 i386 GNU/Linux

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >