Search Results

Search found 4715 results on 189 pages for 'ram bhat'.

Page 150/189 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• eMachine W5243 won't POST; fans run but optical drive will not open.

  - by NicciAdonai

  Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

  Read the article

• Windows 7 AIK help

  - by microchasm

  I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Blue screen of death while installing any Adobe Air application

  - by Gaurav Sharma

  Whenever I try to install an Air application I get a Blue Screen and then my system restarts. I cannot even take a screenshot of it. This happens with every air application I try to install. I also searched for the same on Adobe forums and found the same problem being faced by someone else. His problem was resolved by uninstalling a software named "Folder Lock". I searched my hard disk for this software and found one, so I deleted that software (shift+delete) and removed all it's traces from registry too but that still doesn't solved the problem. I also tried disabling the antivirus software and then install the air application but this also didn't helped. Here is the screenshot of the BSOD. I was able to install air applications earlier, but now I can't. Anybody having same sort of problem. One colleague of mine is also having the same problem. Please help me out. My system's config is as follows: Windows XP Home sp3 Flash Builder 4, with SDK 4.1, 3.5 installed in it. Adobe Air v 2.5 1.5 GB RAM 1.66 MHz processor Thanks

  Read the article

• "Windows detected a hard drive" issue in Windows 7 x64

  - by Jasiu

  I upgraded to the OCZ-Agility3 120GB from a 60 OCZ Vertex2 SSD. I cloned the drive from the Vertex to the new Agility. Everything seemed to have gone well and have not had any problems. Recently in the passed month I have gotten this error: I downloaded teh OCZToolboxMP and ran the SMART utility and don't see anything wrong: SMART READ DATA ModelNumber : OCZ-AGILITY3 Serial Number : OCZ-Y1945X77438P4NU6 WWN : 5-e8-3a-97 ebea5ba76 Revision: 10 Attributes List 1: SSD Raw Read Error Rate Normalized Rate: 70 total ECC and RAISE errors 5: SSD Retired Block Count Reserve blocks remaining: 100% 9: SSD Power-On Hours Total hours power on: 968 12: SSD Power Cycle Count Count of power on/off cycles: 28 171: SSD Program Fail Count Total number of Flash program operation failures: 0 172: SSD Erase Fail Count Total number of Flash erase operation failures: 0 174: SSD Unexpected power loss count Total number of unexpected power loss: 11 177: SSD Wear Range Delta Delta between most-worn and least-worn Flash blocks: 0 181: SSD Program Fail Count Total number of Flash program operation failures: 0 182: SSD Erase Fail Count Total number of Flash erase operation failures: 0 187: SSD Reported Uncorrectable Errors Uncorrectable RAISE errors reported to the host for all data access: 4145 194: SSD Temperature Monitoring Current: 30 High: 30 Low: 30 195: SSD ECC On-the-fly Count Normalized Rate: 120 196: SSD Reallocation Event Count Total number of reallocated Flash blocks: 100 201: SSD Uncorrectable Soft Read Error Rate Normalized Rate: 120 204: SSD Soft ECC Correction Rate (RAISE) Normalized Rate: 120 230: SSD Life Curve Status Current state of drive operation based upon the Life Curve: 100 231: SSD Life Left Approximate SDD life Remaining: 100% 241: SSD Lifetime writes from host lifetime writes 893 GB 242: SSD Lifetime reads from host lifetime reads 968 GB Does anyone have any ideas of what might be wrong and or how I can go about fixing this? Please let me know if there is other information I can provide. Thanks for your help Windows 7 x64 SP1 AMD Phenom II X4 940 8GB RAM

  Read the article

• Visual Studio 2012 Very Slow Typing

  - by DaoCacao

  I have a problem. After SP1 update, passing some time, VS 2012 becomes very-very slow when typing text. Solution size is not big, PC is quite powerful, it has 16GB of RAM, SSD drive, and i7-2600. I have attached using another VS and I see in debugger a lot of exceptions: First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). The thread 0x288c has exited with code 0 (0x0). Anyone have any ideas on what CVcsException is? Googling it gives almost nothing. How do I get rid of this problem?

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Latency between IIS and SQL on same physical, two VMs

  - by Jerad Rose

  I have a single server (2x4 core CPUs, 32GB ram), that is a Windows Server 2012 Hyper V host, and it hosts two guest VMs (also Windows Server 2012 instances). One of them is a web server, the other is a SQL server. When hitting a page that loops over 50 records, there is noticeable latency. I capture/report the timings of each iteration on the loop, and each iteration is about 20-30 milliseconds. Of course, this amounts to over a second of latency for the whole loop. I thought maybe SQL needed to be tuned, but running profiler on it, the queries are showing almost 0 duration, so it seems the bottleneck is in transit between the two VMs. I have both VMs configured to use the actual NIC (vs. using a VNIC), so maybe that's part of my problem. Also, this is a classic ASP site, so it's using the SQL OLE DB provider, and I'm wondering if that is part of the problem. This is a new server setup, from an existing Windows 2003/IIS6 server setup where both web and DB run on the same server instance (no virtualization). On that setup, there is no such latency when looping over the cursor like this. But there are so many variables, I'm not sure where to start ruling things out.

  Read the article

• Slow VM on esxi 4.1

  - by user57432

  We have a FreeBSD 64bit running on a esxi 4.1, the hardware platform is a DELL R710 with 2 x 56xx (intel 6core cpu) and 48 GB ram. The FreeBSD vm is very slow, when we compiles/builds something on it, it takes 5 minuts and it says "build time 18 seconds.". There's no vmtools installed on the vm. The same vm is installaed on another R710 running esxi 4.0 for dell and there's no problems with that one. Does anyone have any idea about what to look for? the VMs on the second server (ESXi 4.1) is a clone of the VMs running on the first VMserver (ESXi 4.0 Dell edition). It's not possible for me to move the VM back to the first server since the file contaning the vm is too big. We installed the new esxi with a datasore with 8mb blocks because 1mb blocks dident allow for the file size we needed. It looks like the www server on the new ESXi 4.1 works fine, but I havent really tested it. There's not installed vmtools on any of the VMs (FreeBSD). The block size on the second VM (ESXi 4.1) datastorage is 8mb and 1mb on the first (ESXi 4.0)

  Read the article

• Server configuration advice for new site that could get lots of traffic within 6m

  - by alchemical

  We're setting up a new web2.0 type site with elements of e-commerce. Budget is kind of tight. Due to the nature of the site and promotions, etc., we expect traffic could ramp up fairly quickly. Looking for advice for a good configuration to start with, we' looking to co-lo with CalPop in downtown LA. We've looked at Dell, ABMX.com, and got a quote from CalPop (they make their own servers as they also do managed hosting). Price range has been anywhere from about $1200-$3300 per server. We're thinking to start with a web server and db server, both with mirrored drives. It would be nice to stay under about 2k per server if possible. Min configuration for each would probably be a quad-core with 8GB Ram. Thinking to run Windows Server 2008 R2 (Web Edition?) and SQL Server 2008. Looking for advice on the best server configurations and/or brands that fit the budget, yet will allow us to smoothly scale as traffic increases. Reliability is also pretty important. Also wondering if a switch/router is necessary or useful to connect the two servers.

  Read the article

• High Sqlservr.exe Memory Usage

  - by user18576

  I have a problem with sqlservr.exe (version 2008). It use a more memory. I checked on windows taskbar manager, sqlservr.exe usage ( Mem usage - 8GB Ram). I dont know how can I fix it.Got the following metrics of the server using Perfmon: SQLServer:Buffer Manager Buffer cache hit ratio 13 SQLServer:Buffer Manager Page lookups/sec 46026128096 SQLServer:Buffer Manager Free pages 129295 SQLServer:Buffer Manager Total pages 997309 SQLServer:Buffer Manager Target pages 1053560 SQLServer:Buffer Manager Database pages 484117 SQLServer:Buffer Manager Reserved pages 0 SQLServer:Buffer Manager Stolen pages 383897 SQLServer:Buffer Manager Lazy writes/sec 384369 SQLServer:Buffer Manager Readahead pages/sec 69315446 SQLServer:Buffer Manager Page reads/sec 71280353 SQLServer:Buffer Manager Page writes/sec 12408371 SQLServer:Buffer Manager Checkpoint pages/sec 7053801 SQLServer:Buffer Manager Page life expectancy 735262 SQLServer:General Statistics Active Temp Tables 161 SQLServer:General Statistics Temp Tables Creation Rate 3131845 SQLServer:General Statistics Logins/sec 2336011 SQLServer:General Statistics Logouts/sec 2335984 SQLServer:General Statistics User Connections 27 SQLServer:General Statistics Transactions 0 SQLServer:Access Methods Full Scans/sec 34422821 SQLServer:Access Methods Range Scans/sec 2027247756 SQLServer:Access Methods Workfiles Created/sec 49771600 SQLServer:Access Methods Worktables Created/sec 28205828 SQLServer:Access Methods Index Searches/sec 4890715219 SQLServer:Access Methods FreeSpace Scans/sec 21178928 SQLServer:Access Methods FreeSpace Page Fetches/sec 21226653 SQLServer:Access Methods Pages Allocated/sec 41483279 SQLServer:Access Methods Extents Allocated/sec 4743504 SQLServer:Access Methods Extent Deallocations/sec 4806606 SQLServer:Access Methods Page Deallocations/sec 41419137 SQLServer:Access Methods Page Splits/sec 23834799 SQLServer:Memory Manager SQL Cache Memory (KB) 29160 SQLServer:Memory Manager Target Server Memory (KB) 8428480 SQLServer:Memory Manager Total Server Memory (KB) 7978472 Some body could help me please.And I really want to know the cause for the above.

  Read the article

• Building new computer, turns on, but no post

  - by addybojangles

  Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

  Read the article

• Delay before download starts when serving files using nginx

  - by glumbo

  I am currently using nginx to serve downloads off my website. Users sometimes need to wait about 5 seconds before their download starts after clicking a download link. I'm not sure if I need to start using raid 10 (I'm currently using raid 50) or if this is a problem with my nginx configuration. I am also on a 1gbit line but download sometimes go as low as 10kB/s. My server: Dual Xeon 5620 CPU, 12x2TB drives with 8GB ram. This is my nginx.conf #user nobody; worker_processes 12; worker_rlimit_nofile 10240; worker_rlimit_sigpending 32768; error_log logs/error.log crit; #pid logs/nginx.pid; events { worker_connections 2048; } http { include mime.types; default_type application/octet-stream; access_log off; limit_conn_log_level info; log_format xfs '$arg_id|$arg_usr|$remote_addr|$body_bytes_sent|$status'; #sendfile on; #tcp_nopush on; reset_timedout_connection on; server_tokens off; autoindex off; keepalive_timeout 0; #keepalive_timeout 65; limit_zone one $binary_remote_addr 10m; perl_modules perl; perl_require download.pm;

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• Win 7 running slowly with low CPU usage and memory

  - by guywhoneedsahand

  I have a relatively new (under 2 yrs old) windows 7 machine. It has 9GB of RAM, and an i7 core CPU (930 @ 2.8GHz w/ 8 CPUs). After about 8 months since a clean install, I noticed my computer was running slowly. I figure it was fragmentation etc, and I did a complete wipe & clean reinstall. However, my problems are somehow persisting. The computer is running painfully slowly (but in leaps and bounds - sometimes it will work fine for 3 hrs, then suddenly freeze up just from clicking the start button). The 'freezes' happen randomly - not during any especially intensive computing. I initially thought something might be eating through my CPU and/or Memory, but Task Manager indicates that neither the CPU or Memory spike. In fact, even during serious lag, CPU usage remains at less than 5% and Memory at ~ 1.5GB. It's beyond me why a fresh install on a powerful machine is performing so poorly... and it certainly is frustrating! What could be causing the poor performance, and what can I do to fix it?

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

• Hardware Requirements & Tuning - Flash Media Server 3.5 Interactive

  - by Anthony Kanago

  I am trying to spec out a server to purchase (physically, not rented from someone like softlayer.com) to run an intranet instace of Flash Media Server 3.5 Interactive. In general, the server will likely be fielding somewhere on the order of 400 connections at a time at the upper limit. Of course, should this increase, we don't want to be stuck. While the decision is not final, we will likely be running the server on Red Hat rather than Windows. The server will be run on gigabit ethernet. I have two related questions: What sort of hardware would I need realistically to support this? What advice can you offer for settings in tuning FMS/the OS to be performant to this level? We are looking for a bare minimum that will run this effectively to save on costs. Realistically, the average number of connections will be fairly low (50-150) by comparison with that upper limit estimate. To reiterate: we just want to be cautious in not getting caught when we need more power, but we also need a low-cost solution (doesn't everyone?) and that may take priority. Windows and RedHat are the two officially supported operating systems. Since FMS is stated to be 32-bit only, I'm sticking with a 32-bit OS. The hardware requirements listed by Adobe on their website are: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended) 2GB of RAM (4GB recommended) 1Gb Ethernet card So what realistically do I need for those sorts of connection numbers, and what can I due to tune things up to get more out of less hardware? Thanks!

  Read the article

• Configuration for a two machine ESXi cluster using VSA to present local storage to VMs

  - by MDMarra

  I'm designing a little vSphere 5 cluster for one of our remote sites. We have some IBM x3650s that have 6x 300GB 10K RPM drives in them, along with dual quad core CPUs and 24GB RAM. Because we use HP P4500 G2s at our primary site, we have licenses available for HP P4000 VSAs. I thought that this would be the perfect opportunity to use them. Below is a basic drawing of what I want to accomplish: I want to run a P4000 VSA on each server and run them in a Network RAID-10 (Lefthand speak for network mirroring, think of it as RAID 1 across nodes or as an active/active storage cluster). I will then present this storage to guests that will run on this mini-cluster. It will be managed by a vCenter Server on our main site. All connections will be GbE with two dedicated to storage. Management and Data will share a pair of connections, since I don't expect there to be high load. These servers are just there to provide directory services, dhcp, printing, etc. Does anyone see anything potentially wrong with this approach? Is this the best way to do this without adding additional dedicated storage heads? Are there any pitfalls in this design, besides the lack of dedicated Data/Mgmt interfaces?

  Read the article

• How to access programs in one PC using another PC

  - by darkstar13

  Hi, I was recently given an old PC for my remote access at work. The CPU that comes with it has Windows XP installed, 400+ MB of ram, all USB devices disabled. I access my work applications using VPN / Citrix. Basically, it' sooooo slow. Plus it's bulky and it will just occupy space, so I am now hoping to find a way for me to integrate this work PC with my home PC. I tried to put in the hard drive in my home PC CPU, and set the drive as slave. However, when I booted my PC from this hard drive, I am stuck at the screen where windows is prompting me to select how am I going to boot (ex. Safe Mode, Safe mode with command prompt, Last Working Configuration, etc), but whatever option I select, I am still stuck at this option after reboot. I am thinking if maybe I can clone the drive and mount the cloned drive and access the system as a virtual machine. But I don't know if that will work. I would like to know if there's something I can do so I can work at home using my home PC, where I can access my work programs to connect to VPN / Citrix. My home PC's OS is Windows 7 Ultimate x64.

  Read the article

• I cannot format my PC

  - by Jesus Buelna

  I have a Toshiba Satellite(1) l505 6gb RAM, 6.00GB hard disk.Initially I have problem with another satellite(2) I had (mother board problem). I took my Laptop to a technician and cost a lot of money (almost as much as buying new one). So, since I have HDD problems with the first one(1) I decided to use the hard disk of the other one(2). I formatted the HDD and erased the partitions it had into 1 partition (or no partition). The problem is that when I try to format with the SO CD, in the screen, where I have to decide in which partition I want to install the SO, the only one option I have says "unallocated partition and I receive this message "Windows cannot install the SO in this partition, run files do not existed or maybe corrupted" When I erased the disk with Parted Magic, Did I erased any files needed for running the installing disk? I don't know. Is it possible to fixed or reinstate the disk to install the OS? By the way, I checked the disk physical health with Parted Magic, and it is OK. One more thing when I erased the disc to 0, I used the safety option offered by the Parted Magic.Need help please.

  Read the article

• Online Storage and security concerns

  - by Megge

  I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

  Read the article

• Need a VM for running a PHP Sandbox

  - by Phani

  I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

  Read the article

• Windows Terminal Server: occasional memory violation for applications

  - by syneticon-dj

  On a virtualized (ESXi 4.1) Windows Server 2008 SP2 32-bit machine which is used as a terminal server, I occasionally (approximately 1-3 event log entries a day) see applications fail with an 0xc0000005 error - apparently a memory access violation. The problem seems quite random and only badly reproducable - applications may run for hours, fail with 0xc0000005 and restart quite fine or just throw the access violation at startup and start flawlessly at the second attempt. The names of executables, modules and offset addresses vary, although a single executable tends to fail with same modules and the same memory offset addresses (like "OUTLOOK.EXE" repeatedly failing on module "olmapi32.dll" with the offset "0x00044b7a") - even across multiple user's logons and with several days passing without a single failure inbetween. The offset addresses seem to change across reboots, however. Only selective executables seem affected by the problem, although I may simply not be seeing a sufficient number of application runs from the other ones. I first suspected a possible problem with the physical machine's RAM, but ruled this out as a rather unlikely cause - the memory comes with ECC and I've already moved the virtual machine across several times, without any perceptable change. I've seen that DEP was enabled in "OptOut" mode on this machine: C:\Users\administrator>wmic OS Get DataExecutionPrevention_SupportPolicy DataExecutionPrevention_SupportPolicy 3 and tried changing the policy to OptIn via startup options: bcdedit.exe /set {current} nx OptIn but have yet to see any effect - I also would expect Outlook 12 or Adobe Reader 9 (both affected applications) to play well with DEP. Any other ideas why the apps may be failing?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >