Search Results

Search found 3975 results on 159 pages for 'sound blaster'.

Page 150/159 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • BluRay audio/video stuttering with PowerDVD 11, WinDVD 11 Pro, etc? Xonar/Auzen HD audio option?

    - by jrista
    I recently upgraded my Windows 7 MediaCenter HTPC due to a motherboard failure (really old motherboard and cpu, it was on its last legs.) I chose to upgrade to an i5 system with everything built into the motherboard. I did my due diligence, researched, and found some hardware that was within my budget. I ended up with: Core i5 2500K (3.3Ghz) Corsair XMS3 2x2Gb DDR3 (4Gb) ASUS P8H 61-M LE/CSM MicroCenter 64Gb SSD (Previous BluRay player, forget the brand) The system is pretty awesome, and plays everything I have perfectly. I almost went with an Atom solution, however there have been numerous notes that they do not play NetFlix Instant Watch well...and I am a heavy Netflix IW user. High definition BluRay rips work well, although they usually contain lower audio quality than the BluRay's they were ripped from. The real problem I am encountering is playing back BluRay video from discs. For some reason, I am encountering rather terrible stuttering problems with both the audio and video. The stuttering is synchronous in both, and occurs at seemingly random intervals. I've used PowerDVD 9, PowerDVD 11 trial, and WinDVD 11 Pro trial. All three have stuttering problems, although PowerDVD 11 seems to have the least. Watching system resource usage, CPU load is never above 20%, and memory usage tends to be a constant 1/3rd the total available system memory. When playback is fine, its superb...the video is crystal clear. The audio quality is ok, certainly not what I would expect from a BluRay disc. I did some research, and it seems that playing BluRay from a PC causes a downsampling of the audio? I am curious if the audio is my primary problem here, the cause of the stuttering I am encountering? When stuttering occurs, the audio gets REALLY bad, while the video just pauses momentarily every second until for whatever reason everything picks up and runs fine (usually after a few seconds to a couple minutes.) The audio chipset is a Realtek HD ALC887 8-channel, supposedly designed to support BluRay playback. Has anyone encountered any issues like this playing back bluray discs on a PC (namely with PowerDVD...WinDVD was FAR worse, and seemed to have real trouble even reading the discs, and I have no interest in fiddling with it further.) Is there any reason to suspect the video decoding as the problem?(Given how bad the audio gets during a stutter, and how clean the video remains, I am inclined to think the issue boils down to audio.) Is it even remotely possible that the motherboard, cpu, or ram are causing the stuttering (all three are pretty blazing fast...faster than the hardware that I replaced, which seemed to play BluRay fine with PowerDVD 9.) I've read a bit about the Asus Xonar HDAV 1.3 and the Auzen X-Fi HomeTheater HD home theater hi-fi audio cards. Seems they are the only way to get true full-quality, uncompressed BluRay audio bitstreaming over HDMI on a PC. None of the usual suspects seem to have these cards in stock, however. Are these cards worth getting? Are they even still available, or have they been discontinued (if so, that would indeed be sad...they sound simply fantastic.)

    Read the article

  • Does this prove a network bandwidth bottleneck?

    - by Yuji Tomita
    I've incorrectly assumed that my internal AB testing means my server can handle 1k concurrency @3k hits per second. My theory at at the moment is that the network is the bottleneck. The server can't send enough data fast enough. External testing from blitz.io at 1k concurrency shows my hits/s capping off at 180, with pages taking longer and longer to respond as the server is only able to return 180 per second. I've served a blank file from nginx and benched it: it scales 1:1 with concurrency. Now to rule out IO / memcached bottlenecks (nginx normally pulls from memcached), I serve up a static version of the cached page from the filesystem. The results are very similar to my original test; I'm capped at around 180 RPS. Splitting the HTML page in half gives me double the RPS, so it's definitely limited by the size of the page. If I internally ApacheBench from the local server, I get consistent results of around 4k RPS on both the Full Page and the Half Page, at high transfer rates. Transfer rate: 62586.14 [Kbytes/sec] received If I AB from an external server, I get around 180RPS - same as the blitz.io results. How do I know it's not intentional throttling? If I benchmark from multiple external servers, all results become poor which leads me to believe the problem is in MY servers outbound traffic, not a download speed issue with my benchmarking servers / blitz.io. So I'm back to my conclusion that my server can't send data fast enough. Am I right? Are there other ways to interpret this data? Is the solution/optimization to set up multiple servers + load balancing that can each serve 180 hits per second? I'm quite new to server optimization, so I'd appreciate any confirmation interpreting this data. Outbound traffic Here's more information about the outbound bandwidth: The network graph shows a maximum output of 16 Mb/s: 16 megabits per second. Doesn't sound like much at all. Due to a suggestion about throttling, I looked into this and found that linode has a 50mbps cap (which I'm not even close to hitting, apparently). I had it raised to 100mbps. Since linode caps my traffic, and I'm not even hitting it, does this mean that my server should indeed be capable of outputting up to 100mbps but is limited by some other internal bottleneck? I just don't understand how networks at this large of a scale work; can they literally send data as fast as they can read from the HDD? Is the network pipe that big? In conclusion 1: Based on the above, I'm thinking I can definitely raise my 180RPS by adding an nginx load balancer on top of a multi nginx server setup at exactly 180RPS per server behind the LB. 2: If linode has a 50/100mbit limit that I'm not hitting at all, there must be something I can do to hit that limit with my single server setup. If I can read / transmit data fast enough locally, and linode even bothers to have a 50mbit/100mbit cap, there must be an internal bottleneck that's not allowing me to hit those caps that I'm not sure how to detect. Correct? I realize the question is huge and vague now, but I'm not sure how to condense it. Any input is appreciated on any conclusion I've made.

    Read the article

  • ubuntu 10.04; kvm bridged networking not working with public ip addresses

    - by senorsmile
    I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

    Read the article

  • Hardware recommendations / parts list for a modern, quiet ZFS NAS box - 2011-Feb edition [closed]

    - by dandv
    I want to build some really reliable storage for my data, and it seems that ZFS is the only filesystem at the moment that does live checksumming. That rules out DroboPro, so I'm looking to building a quiet ZFS NAS that would start with 4 2TB or larger hard drives. I'd like this system to be very reliable and relatively future-proof for 2-3 years, so I'm willing to invest some $$$ and buy higher end components. I did see questions here and on other forums about low-cost servers, but I'm not looking for those. I'd be super happy to go for an off-the-shelf solution, but I haven't found one that's quiet. I started doing the research (summarized on my wiki), but I realized that it just gets too complicated for what I know as a software dude, and I'm entering the analysis paralysis area. At this point, I'm basically looking for a parts list for a configuration that will work (and is modern), and I know there are folks around here who are way more competent than me. I've built computers and am comfortable assembling one and messing with *nix; I can follow guides; I just want to end the decision process for the hardware and software configuration. What I've researched so far (not that these are very modern components): Case: I think I've settled on the Antec Twelve Hundred case because it cools well, is quiet, and simply has 12 bays that allow elastic mounting. The SilverStone Raven is its counter-candidate, but I find its construction quite odd. For the PSU, I'm torn between Antec CP-850 and Nexus RX-8500, but I did this research more than a year ago. The Nexus has a very uniform power profile, and I'd rather not have the Antec spin up and down based on load. On the other hand, I'm not sure how often my file server will draw more than 400W under use. For the hard drives, I've read that WD Black drives are actually WD RE3 with a software setting changed. I'd also like to buy different drive types, not just 4 WDs. Recommendations? Right now I have a 2TB Hitachi Deskstar 7K300. For the motherboard, CPU and RAM I have no idea, other than the RAM must be ECC. I already asked a question here about ECC RAM, but I was misguided and was looking for a motherboard that would support USB 3.0 as well. I've learned to go with eSATA, or worry about USB later. Then there's the (liquid) cooling, Wi-Fi card, and FreeBSD vs. OpenSolaris Express. Lastly, I'm wondering if I can make this PC into a media server by adding a Blu-ray drive and a good sound card. But support for Blu-Ray is spotty on Linux, and I don't know if Windows 7 on VirtualBox would get sufficient hardware access to output HDMI or SPDIFF signals. (Running OpenSolaris virtualized is not an option because of the reliability risk.) Then there are HDCP concerns. Suggestions on that would be appreciated as well, but I don't want us to get sidetracked. A specific shopping list on the core components would be great, so I can start ordering, and in the meantime educate myself with regards to the other issues. Finally, I think this could become a great FAQ for those technically inclined to build their own ZFS server, but confused by the dizzying array of options out there, and I promise to compile the results and share my experience building and benchmarking the server.

    Read the article

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • File copying utility like rsync with error handling like ddrescue, for data recovery from a hard drive with bad sectors or hardware failure

    - by purefusion
    I have a hard drive with either bad blocks or sectors that are failing to read due to potential mechanical issues, such as a bad disk head, bad motor, or some other issue that is causing the hard drive to read data excruciatingly slowly and with lots of read errors. I'm seeing an average of 50 KB/sec, with some reads dropping below 10 KB/sec, and frequently it gets stuck on a file or sector altogether, usually for quite a long time—from 2-10 minutes or more (when using rsync, before it times out). Speed seems to vary wildly, and it gets stuck on files a lot, and when it finally gets "unstuck" it only seems to last for a short burst before it gets stuck again. The drive is also very quiet with only an occasional sound of files copying (usually when it gets stuck/unstuck for a brief time, before getting stuck again). Thus, there are none of those evil sounds that are normally associated with HDD death. Someone suggested that the problems sounded like they might be caused by a misaligned disk head, which requires a lot of re-reads before it finally reads data with success. Sounds plausible, but I digress... Anyway, the problem with rsync is that it seems to have no decent error handling support. Obviously, it wasn't meant for use in recovering data from failing hard drives, but all the so-called "data recovery" utilities out there that are meant for such use usually focus on recovery of deleted files or messed up partitions, rather than copying files off dying hard drives. Deleted file recovery is not what I need, obviously, so perhaps you can understand my disappointment in not being able to find what I'm after yet. Naturally, this is where you'd probably say "You should use ddrescue!" Well, that's all fine and dandy, but I've already got most of the data backed up, so I just want to recover certain files. I'm not concerned with trying to recover a full partition block-by-block as ddrescue does. I am only interested in rescuing just specific files and directories. Ideally, what I'd like is some sort of cross between rsync and ddrescue: something that lets me specify source and destination as directories of normal files like rsync (rather than two full partitions as ddrescue requires), with a way to skip files with errors in an initial run, and then allows me to attempt recovery of those files with errors in a later run (with a slightly altered command, of course), perhaps even offering an option to specify the number of retry attempts ...just like how ddrescue works with blocks, only I want a utility that works with specific files/directories like rsync does. So am I daydreaming here, or does something out there exist that can do this? Or, maybe even a way to make rsync or ddrescue work in such a way? I'm really open to whatever solutions might work, so long as they let me choose which files I want to "rescue", and can skip files with errors in the initial run, and try/retry those errors again later. So far I've tried rsync with the following options, but it often gets stuck on a file for longer than the timeout, and ideally I'd just like it to move on to the next file and come back later to the files it gets stuck on. I don't think that's possible though. Anyway, here's what I've been using up till now: rsync -avP --stats --block-size=512 --timeout=600 /path/to/source/* /path/to/destination/

    Read the article

  • Determining the required depth and specifications for a server cabinet

    - by Bingu Bingme
    I'm trying to understand the considerations ("why") that go into determining the specifications ("what") for a rackmount server cabinet, in order to determine what sort of rack I should purchase for my home use. Since this is for home use, I won't be following certain best practices (eg. hot/cold aisle, not even air conditioning) and may be willing to sacrifice in various areas in order to reduce cost and footprint - but please advise if there are safety concerns or other considerations to note. The most basic specs for a server cabinet are the dimensions (external width x external depth x usable height). Width: commonly 600mm or 800mm (if the use case requires extra clearance around the sides, such as if there is lots of cabling). In my case and most common cases, I'm going to stick with 600mm. Height: Select a sufficiently tall rack to fit my equipment. But how much may I stuff into it? Eg, if there is a 15U rack, can I really populate it with 15U of servers, or should I leave 1U at top and bottom for air circulation? Depth: Racks commonly have external depth of 600mm (network equipment), 800mm, 1000mm, or even longer. I'm trying to see how to fit into the 800mm depth. With reference to http://www.server-racks.com/rack-mount-depth.html, I'm hoping to have the front and rear posts mounted ~ 28.5" (72cm) apart, which would leave only 8cm for front space and rear space. How much rear space (from rear posts to back of rack) do I really need? I won't use cable management arms, so can I mount a 72cm depth server since the power, KVM, network cables won't take up much depth? My most important equipment are all < 60cm depth (4U chassis) and should comfortably fit within the 800mm cabinet. The rest of the equipment are very old 1U servers that range from 65-72cm depth. I might still want to make further use of them, or I might discard them since they are so old. Even if the 72cm servers cannot be powered on in an 800mm rack, I should be able to use them as 1U shelves. But, what server depth can I expect to be able to operate? Or am I forced to upgrade to 1000mm depth racks in order to use any servers deeper than 60cm? With reference to best practices for HP racks, some other specs and installation considerations: There aren't any minimum recommendations for clearance on the sides of the rack. It is recommended to leave 48" front clearance. The 48" front clearance is based on 32" chassis depth, 13" to extend the rack rails and mate the inner/outer rails, and 3" for movement. If I don't use such rails (eg, use shelves instead), it should be sufficient to leave front clearance of chassis depth + 3". It is recommended to leave 30" rear clearance "to provide space for servicing the rack". I'm planning to back the rack into a corner of the room, and wheel it slightly out when I need to access the rear. If the wheeling plan is ok, I still need to know how much rear clearance is required for air circulation and ventilation purposes. Castor wheels and stabilising feet. Since I'm backing the rack into a corner of the room, I'll only be able to set the stabilising feet on the front corners. Thoughts on safety? The rack that I'm considering has front glass doors with side ventilation slits and fully perforated rear doors. I'm hoping this will be a good balance between temperature and noise (only ventilation slits facing out the front, while the rear is facing the walls). Or is the sound of high-rpm fans going to escape through the front slits anyway and destroy my sanity?

    Read the article

  • How to diagnose and solve an erratic "HDCP Support Required"?

    - by Jom Orgstrom
    I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

    Read the article

  • Computer not POSTing "randomly"?

    - by smoth190
    I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

    Read the article

  • Gaming blew fuse and causes funny smell: how to overcome?

    - by George Tomlinson
    I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

    Read the article

  • Hard drive after PCB swap strange stuff

    - by ramyy
    I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

    Read the article

  • Android GPS timeout

    - by Scott Saunders
    I'm writing an Android application that, among other things, needs to send the current GPS coordinates to a server when the user tells it to. From a context menu, I run the service below. The service is a LocationListener and requests updates from the LocationManager. When it gets a location (onLocationChanged()), it removes itself as a listener and sends the coordinates off to the server. All of this is working. However, if GPS coordinates are not quickly available, my service just keeps running until it gets some. It holds up the UI with a progress dialog, which is annoying. Worse, if the user has moved since starting the service, the first GPS coordinates might be wrong and the app will send bad data to the server. I need a timeout on the service. Is there a good way to do that? I'm not very experienced with threads. I think I can run a Runnable in the onStartCommand() method that will somehow count down 30 seconds and then, if there is no GPS result yet, call my service's stop() method. Does that sound like the best way to do this? Alternatively, is it possible to tell if the GPS cannot get a fix? How would I go about doing that? Edit: To further clarify, I'm looking for the best way to "give up" on getting a Location after some amount of time. public class AddCurrentLocation extends Service implements LocationListener { Application app; LocationManager mLocManager; ProgressDialog mDialog; @Override public int onStartCommand(Intent intent, int arg0, int arg1) { app = getApplication(); // show progress dialog if (app.getScreen() != null) { mDialog = ProgressDialog.show(app.getScreen(), "", "Adding Location. Please wait...", true); } // find GPS service and start listening Criteria criteria = new Criteria(); criteria.setAccuracy(Criteria.ACCURACY_FINE); mLocManager = (LocationManager) getSystemService(Context.LOCATION_SERVICE); String bestProvider = mLocManager.getBestProvider(criteria, true); mLocManager.requestLocationUpdates(bestProvider, 2000, 0, this); return START_NOT_STICKY; } private void stop() { mLocManager.removeUpdates(this); if (mDialog != null) { mDialog.dismiss(); } stopSelf(); } @Override public void onLocationChanged(Location location) { // done with GPS stop listening mLocManager.removeUpdates(this); sendLocation(location); // method to send info to server stop(); } // other required methods and sendLocation() ... }

    Read the article

  • UIScrollView image/photo viewer with paging enabled and zooming

    - by Mike Weller
    OK, I think it's time to make an official place on the internet for this problem: How to make a UIScrollView photoviewer with paging and zooming. Welcome my fellow UIScrollView hackers. I have a UIScrollView with paging enabled, and I'm displaying UIImageViews like the built-in photos app. (Does this sound familiar yet?) I found the following project on github: http://wiki.github.com/andreyvit/ScrollingMadness Which shows how to implement zooming in a scroll view while paging is enabled. If anyone else tries this out, I actually had to remove the UIScrollView subclass and use the native class otherwise it doesn't work. I think it's because of changes in the 3.0 SDK relating to how the scroll view intercepts touch events. So the the idea is to remove all the other views when you start zooming, and move the current view to (0, 0) in the scrollview, updating the contentsize etc. Then when you zoom back to 1.0f it adds the other views back and puts things all back in order. Anyway, that project works perfectly in the simulator, but on the device there is some nasty movement of the view you are resizing, which looks like it's caused by the fact we are changing the contentsize/offset etc. for the view being resized. You have to do this view moving otherwise you can pan left through the whitespace left by the other views. I found one interesting note in the "Known Issues" of the 3.0 SDK release notes: UIScrollView: After zooming, content inset is ignored and content is left in the wrong position. This kind of sounds like what is happening here. After zooming in, the view will shift offscreen because you have changed the offset etc. I've spent hours on this already and I'm slowing coming to the sad realization that this just isn't going to work. Three20's photo viewer is out of the question: it's too heavy weight and there is too much unnecessary UI and other behaviour. The built in Photo app seems to do some magic. If you zoom in on an image and pan to the far edges, the current photo moves independently of the photo next to it which isn't what you get when trying this with a standard UIScrollView. I've seen discussion about nesting the UIScrollView's but I really don't want to go there. Has anybody managed this with the standard UIScrollView (and works in the 2.2 and 3.0 SDK)? I don't fancy rolling my own zoom + bounce + pan + paging code.

    Read the article

  • Best ASP.NET E-Commerce Framework (aspDotNetStoreFront, AbleCommerce, BVCommerce, MediaChase,...)

    - by EfficionDave
    I need a full-featured asp.net E-Commerce solution for a project. It needs to be easily extensible as I need to extend it to integrate with a custom Flash based personalization engine. It should also have a great administrative back-end that handles inventory tracking, report, labels, shipping, ... so that the client can really use it as the basis for their business. I've used quite a few different E-Commerce systems including OSCommerce, Zen Cart, Catalook, and eTailer. While I was impressed with Zen Cart and eTailer, this project is big enough that I want to try a more serious, commercial offering. I'm particularly interested in thoughts on aspdotnetstorefront, BVCommerce, AbleCommerce, and MediaChase. [UPDATE] I've done quite a bit of evaluation since I posted this question and will give some of my findings below: BVCommerce - The price point is nice, the product seems fairly well regarded, and I've heard good things about customizing/extending it, it just doesn't seem like it's going to meet my needs as an Top Tier ECommerce solution. After viewing the tutorial videos, the Admin interface just seems too basic and outdated. aspDotNetStorefront - The integration with DotNetNuke was it's biggest selling point for me but after reading peoples opinions, it's integration seems quite weak. It's sounds like there's a significant learning curve and the architecture just doesn't sound like it's as clean as it should be. AbleCommerce - After a rather thorough evaluation, I have selected AbleCommerce for at least my next project. The Admin interface is beautiful and has a nice list of features. The E-Commerce portion of the user side is very well done, highly skin-able (using Master Pages and a couple other techniques), and the checkout workflow has all the features I need while still being very clean. Source to the API can be bought for $500 but you generally won't need it. There are some 3rd party modules available but there's not currently a large market for these. The biggest glaring weakness of AbleCommerce I've found is their CMS capabilities are very limited and not at all well suited for a non-technical user to make most site content updates. But I have a good solution for that that I plan adapting into AbleCommerce. They will automatically generate a site for you to play with to your heart's content for 30 days. It is defniitely worth checking out.

    Read the article

  • Clickable widgets in android

    - by Leif Andersen
    The developer documentation has seemed to have failed me here. I can create a static widget without thinking, I can even create a widget like the analogue clock widget that will update itself, however, I can not for the life of me figure out how to create a widget that reacts to when a user clicks on it. Here is the best code sample that the developer documentation gives to what a widget activity should contain (the only other hint being the API demos, which only creates a static widget): public class ExampleAppWidgetProvider extends AppWidgetProvider { public void onUpdate(Context context, AppWidgetManager appWidgetManager, int[] appWidgetIds) { final int N = appWidgetIds.length; // Perform this loop procedure for each App Widget that belongs to this provider for (int i=0; i<N; i++) { int appWidgetId = appWidgetIds[i]; // Create an Intent to launch ExampleActivity Intent intent = new Intent(context, ExampleActivity.class); PendingIntent pendingIntent = PendingIntent.getActivity(context, 0, intent, 0); // Get the layout for the App Widget and attach an on-click listener to the button RemoteViews views = new RemoteViews(context.getPackageName(), R.layout.appwidget_provider_layout); views.setOnClickPendingIntent(R.id.button, pendingIntent); // Tell the AppWidgetManager to perform an update on the current App Widget appWidgetManager.updateAppWidget(appWidgetId, views); } } } from: The Android Developer Documentation's Widget Page So, it looks like pending intent is called when the widget is clicked, which is based off of an intent (I'm not quite sure what the difference between an intent and a pending intent is), and the intent is for the ExampleActivity class. So I made my sample activity class a simple activity that when created, would create a mediaplayer object, and start it (it wouldn't ever release the object, so it would eventually crash, here is it's code: @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); MediaPlayer mp = MediaPlayer.create(getApplicationContext(), R.raw.sound); mp.start(); } However, when I added the widget to the home screen, and clicked on it, nothing played, in fact, nothing played when I set the update timer to just a few hundred milliseconds (in the appwidget provider xml file). Furthermore, I set break points and found out that not only was it never reaching the activity, but no break points I set would ever get triggered. (I still haven't figured out why that is), however, logcat seemed to indicate that the activity class file was being run. So, is there anything I can do to get an appwidget to respond to a click? As the onClickPendingIntent() method is the closest I have found to a onClick type of method. Thank you very much.

    Read the article

  • Bidirectional URL Rewriting/Redirecting in IIS7.5

    - by David Foster
    First off, I'd like to apologise for the ludicrous title. I'm not trying to sound cool or clever by using the word 'bidirectional', I just genuinely couldn't think of another way to describe it. Promise. On to my problem. I have the following in the <system.webserver>/<rewrite>/<rules> section of my Web.config. <!-- Who We Are --> <rule name="1A"> <match url="^whoweare.aspx$" /> <action type="Redirect" url="who-we-are" redirectType="Permanent" /> </rule> <rule name="1B"> <match url="^who-we-are$" /> <action type="Rewrite" url="whoweare.aspx" /> </rule> <!-- What We Do --> <rule name="2A"> <match url="^whatwedo.aspx$" /> <action type="Redirect" url="what-we-do" redirectType="Permanent" /> </rule> <rule name="2B"> <match url="^what-we-do$" /> <action type="Rewrite" url="whatwedo.aspx" /> </rule> Now this works tremendously. Effectively, if you visit the URL http://example.com/whoweare.aspx (which is the actual URL of the page), you'll be 301 redirected to the URL http://example.com/who-we-are (the virtual URL), and if you visit the virtual URL, you'll be rewritten to the actual URL. This means super sexy URLs without duplication, and it doesn't result in reciprocal rewriting either, so smiles all round. My question is this: could this be done more elegantly? It's a little cumbersome having to write out two rules to ensure that one is redirected to the other, and the other is rewritten to the one. Is it possible to write one rule which will achieve the functionality of the above two?

    Read the article

  • Problem with waveOutWrite and waveOutGetPosition deadlock

    - by MusiGenesis
    I'm working on an app that plays audio continuously using the waveOut... API from winmm.dll. The app uses "leapfrog" buffers, which are basically a bunch of arrays of samples that you dump into the audio queue. Windows plays them seamlessly in sequence, and as each buffer completes Windows calls a callback function. Inside this function, I load the next set of samples into the buffer, process them however, and then dump the buffer back into the audio queue. In this way, the audio plays indefinitely. For animation purposes, I'm trying to incorporate waveOutGetPosition into the application (since the "buffer done" callbacks are irregular enough to cause jerky animation). waveOutGetPosition returns the current position of playback, so it's hyper-precise. The problem is that in my application, making calls to waveOutGetPosition eventually causes the application to lock up - the sound stops and the call never returns. I've boiled things down to a simple app that demonstrates the problem. You can run the app here: http://www.musigenesis.com/SO/waveOut%20demo.exe If you just hear a tiny bit of piano over and over, it's working. It's just meant to demonstrate the problem. The source code for this project is here: http://www.musigenesis.com/SO/WaveOutDemo.zip The first button runs the app in leapfrog mode without making the calls to waveOutGetPosition. If you click this, the app will play forever without breaking (the X button will close it and shut it off). The second button starts the leapfrogger and also starts a forms timer that calls the waveOutGetPosition and displays the current position. Click this and the app will run for a short while and then lock up. On my laptop, it usually locks up in 15-30 seconds; at most it's taken a minute. I have no idea how to fix this, so any help or suggestions would be most welcome. I've found very few posts on this issue, but it seems that there is a potential deadlock, either from multiple calls to waveOutGetPosition or from calls to that and waveOutWrite that occur at the same time. It's possible that I'm calling this too frequently for the system to handle.

    Read the article

  • iPhone SDK: Audio Queue control

    - by codemercenary
    Hi all, I am new to the audio queue services so I have taken an example from a book called iPhone Cool Projects where it describes how to stream audio. I want to extend this to being able to play a continuous playlist of links to mp3 files like an internet radio. The problem with the example code it that it does not detect when a stream ends and does not call AudioQueueStop at any point, so I added a counter to number of buffers added to the queue, and then decrement this counter each time audioQueueOutputCallback is called by the queue. This works fine except if when the buffer count goes to 0, and then I add a call AudioQueueFlush(audioQueue) and then AudioQueueStop(audioQueue, false) I get an error. If I only call AudioQueueReset, it continues to load the buffers again, but plays them out faster then it loads them... getting stuck in a loop and then crashing. 2010-04-14 13:56:29.745 AudioPlayer[2269:207] init player with URL 2010-04-14 13:56:29.941 AudioPlayer[2269:207] did recieve data 2010-04-14 13:56:29.942 AudioPlayer[2269:207] audio request didReceiveData 2010-04-14 13:56:29.944 AudioPlayer[2269:207] >>> start audio queue 2010-04-14 13:56:29.960 AudioPlayer[2269:207] packetCallback count 2 2010-04-14 13:56:29.961 AudioPlayer[2269:207] add buffer: 1 2010-04-14 13:56:29.962 AudioPlayer[2269:207] did recieve data 2010-04-14 13:56:29.963 AudioPlayer[2269:207] audio request didReceiveData 2010-04-14 13:56:29.963 AudioPlayer[2269:207] packetCallback count 1 2010-04-14 13:56:29.964 AudioPlayer[2269:207] add buffer: 2 2010-04-14 13:56:29.965 AudioPlayer[2269:207] packetCallback count 13 2010-04-14 13:56:29.967 AudioPlayer[2269:207] add buffer: 3 2010-04-14 13:56:29.968 AudioPlayer[2269:207] done with buffer: 3 2010-04-14 13:56:29.969 AudioPlayer[2269:207] done with buffer: 2 2010-04-14 13:56:29.974 AudioPlayer[2269:207] done with buffer: 1 So this loop continues some 20 - 30 times and then it crashes. The first time it plays an audio file it queues up the buffers and then plays sound, but doesn't callback to delete them until some 100 or more have been played. Can anyone explain this behavior? I read that there was a limit of 1 audio queue for MP3 playback for the iPhone. Is that still true? If not then I suppose I should use another audio queue for the next mp3 stream. I've had a look through the apple docs but it doesn't explain this in any particular detail. A better insight into this would be great. TIA.

    Read the article

  • Event taps: Varying results with CGEventPost, kCGSessionEventTap, kCGAnnotatedSessionEventTap, CGEve

    - by kevingessner
    I'm running into a thorny problem with posting an event from an event tap. I'm tapping for NSSystemDefined at kCGHIDEventTap, then replacing the event with a new one. The problem I'm running in to is that depending on how I post the event, it's being seen only by some applications. My test applications are Opera, Firefox, Quicksilver, and Xcode. Here are the different techniques I've tried within my event tap callback, with results. I'm expecting an action (the "correct response") from each app; "system beep" means the nothing-is-bound-to-that-key system sound. Create a new event, and return it from the callback. Opera: no response/system beep, Firefox: no response/system beep, Quicksilver: correct response, Xcode: no response/system beep Create a new event, post to kCGSessionEventTap with CGEventPost, return null. Opera: no response/system beep, Firefox: no response/system beep, Quicksilver: correct response, Xcode: no response/system beep Create a new event, post to kCGAnnotatedSessionEventTap with CGEventPost, return null. Opera: correct response, Firefox: correct response, Quicksilver: no response/system beep, Xcode: no response/system beep Create a new event, post with CGEventTapPostEvent, return null. Opera: no response/system beep, Firefox: no response/system beep, Quicksilver: correct response, Xcode: no response/system beep Create a new event, post to kCGSessionEventTap with CGEventPost, and return new event. Opera: no response/system beep, Firefox: no response/system beep, Quicksilver: correct response, Xcode: no response/system beep Create a new event, post to kCGAnnotatedSessionEventTap with CGEventPost, and return new event. Opera: correct response and system beep, Firefox: correct response and system beep, Quicksilver: correct response and system beep, Xcode: no response/double system beep Create a new event, post with CGEventTapPostEvent, and return new event. Opera: no response/system beep, Firefox: no response/system beep, Quicksilver: correct response, Xcode: no response/system beep (6) is the best, but users are complaining about the extra system beep on correct responses, which I'm guessing is coming from the double-posting of the event. I'm not sure of other combinations to try, or where else to look. Can anyone offer any guidance? Is there any way to get the results of both returning the event from my callback and posting to the annotated tap without doing both? Sorry for the lengthy question; I've been doing a lot of experimenting. Thanks in advance Update: this is the code I use to create the event tap: CFMachPortRef eventTap; eventTap = CGEventTapCreate(kCGHIDEventTap, kCGHeadInsertEventTap, 0,CGEventMaskBit(NX_SYSDEFINED) | (1 << kCGEventKeyDown) | (1 << kCGEventKeyUp), myCGEventCallback, (void *)hidEventQueue);

    Read the article

  • Color Theory: How to convert Munsell HVC to RGB/HSB/HSL

    - by Ian Boyd
    I'm looking at at document that describes the standard colors used in dentistry to describe the color of a tooth. They quote hue, value, chroma values, and indicate they are from the 1905 Munsell description of color: The system of colour notation developed by A. H. Munsell in 1905 identifies colour in terms of three attributes: HUE, VALUE (Brightness) and CHROMA (saturation) [15] HUE (H): Munsell defined hue as the quality by which we distinguish one colour from another. He selected five principle colours: red, yellow, green, blue, and purple; and five intermediate colours: yellow-red, green-yellow, blue-green, purple-blue, and red-purple. These were placed around a colour circle at equal points and the colours in between these points are a mixture of the two, in favour of the nearer point/colour (see Fig 1.). VALUE (V): This notation indicates the lightness or darkness of a colour in relation to a neutral grey scale, which extends from absolute black (value symbol 0) to absolute white (value symbol 10). This is essentially how ‘bright’ the colour is. CHROMA (C): This indicates the degree of divergence of a given hue from a neutral grey of the same value. The scale of chroma extends from 0 for a neutral grey to 10, 12, 14 or farther, depending upon the strength (saturation) of the sample to be evaluated. There are various systems for categorising colour, the Vita system is most commonly used in Dentistry. This uses the letters A, B, C and D to notate the hue (colour) of the tooth. The chroma and value are both indicated by a value from 1 to 4. A1 being lighter than A4, but A4 being more saturated than A1. If placed in order of value, i.e. brightness, the order from brightest to darkest would be: A1, B1, B2, A2, A3, D2, C1, B3, D3, D4, A3.5, B4, C2, A4, C3, C4 The exact values of Hue, Value and Chroma for each of the shades is shown below (16) So my question is, can anyone convert Munsell HVC into RGB, HSB or HSL? Hue Value (Brightness) Chroma(Saturation) === ================== ================== 4.5 7.80 1.7 2.4 7.45 2.6 1.3 7.40 2.9 1.6 7.05 3.2 1.6 6.70 3.1 5.1 7.75 1.6 4.3 7.50 2.2 2.3 7.25 3.2 2.4 7.00 3.2 4.3 7.30 1.6 2.8 6.90 2.3 2.6 6.70 2.3 1.6 6.30 2.9 3.0 7.35 1.8 1.8 7.10 2.3 3.7 7.05 2.4 They say that Value(Brightness) varies from 0..10, which is fine. So i take 7.05 to mean 70.5%. But what is Hue measured in? i'm used to hue being measured in degrees (0..360). But the values i see would all be red - when they should be more yellow, or brown. Finally, it says that Choma/Saturation can range from 0..10 ...or even higher - which makes it sound like an arbitrary scale. So can anyone convert Munsell HVC to HSB or HSL, or better yet, RGB?

    Read the article

  • getExtra from Intent launched from a pendingIntent

    - by spagi
    Hi. I am trying to make some alarms after the user selects something with a time from a list and create a notification for it at the given time. My problem is that the "showname" that a putExtra on my Intent cant be received at the broadcast receiver. It always get null value. This is the way I do it for most of my intents but I think this time maybe because of the pendingIntent or the broadcastReceiver something need to be done differentelly. Thank you The function that sends the Intent through the pending intent public void setAlarm(String showname,String time) { String[] hourminute=time.split(":"); String hour = hourminute[0]; String minute = hourminute[1]; Calendar rightNow = Calendar.getInstance(); rightNow.set(Calendar.HOUR_OF_DAY, Integer.parseInt(hour)); rightNow.set(Calendar.MINUTE, Integer.parseInt(minute)); rightNow.set(Calendar.SECOND, 0); long t=rightNow.getTimeInMillis(); long t1=System.currentTimeMillis(); try { Intent intent = new Intent(this, alarmreceiver.class); Bundle c = new Bundle(); c.putString("showname", showname);//This is the value I want to pass intent.putExtras(c); PendingIntent pendingIntent = PendingIntent.getBroadcast(this, 12345, intent, 0); AlarmManager alarmManager = (AlarmManager) getSystemService(ALARM_SERVICE); alarmManager.set(AlarmManager.RTC_WAKEUP, rightNow.getTimeInMillis(),pendingIntent); //Log.e("ALARM", "time of millis: "+System.currentTimeMillis()); Toast.makeText(this, "Alarm set", Toast.LENGTH_LONG).show(); } catch (Exception e) { Log.e("ALARM", "ERROR IN CODE:"+e.toString()); } } And this is the receiving end public class alarmreceiver extends BroadcastReceiver { @Override public void onReceive(Context context, Intent intent) { // Toast.makeText(context, "Alarm worked.", Toast.LENGTH_LONG).show(); Bundle b = intent.getExtras(); String showname=b.getString("showname");//This is where I suppose to receive it but its null NotificationManager manger = (NotificationManager) context .getSystemService(context.NOTIFICATION_SERVICE); Notification notification = new Notification(R.drawable.icon, "TVGuide ?pe???µ?s?", System.currentTimeMillis()); PendingIntent contentIntent = PendingIntent.getActivity(context, 0, new Intent(context, tvguide.class), 0); notification.setLatestEventInfo(context, "?? ?????aµµa ?e????se", showname, contentIntent); notification.flags = Notification.FLAG_ONLY_ALERT_ONCE; notification.sound = Uri.parse("file:///sdcard/dominating.mp3"); notification.vibrate = new long[]{100, 250, 100, 500}; manger.notify(1, notification); } }

    Read the article

  • Asynchronous sockets in C#

    - by IVlad
    I'm confused about the correct way of using asynchronous socket methods in C#. I will refer to these two articles to explain things and ask my questions: MSDN article on asynchronous client sockets and devarticles.com article on socket programming. My question is about the BeginReceive() method. The MSDN article uses these two functions to handle receiving data: private static void Receive(Socket client) { try { // Create the state object. StateObject state = new StateObject(); state.workSocket = client; // Begin receiving the data from the remote device. client.BeginReceive( state.buffer, 0, StateObject.BufferSize, 0, new AsyncCallback(ReceiveCallback), state); } catch (Exception e) { Console.WriteLine(e.ToString()); } } private static void ReceiveCallback( IAsyncResult ar ) { try { // Retrieve the state object and the client socket // from the asynchronous state object. StateObject state = (StateObject) ar.AsyncState; Socket client = state.workSocket; // Read data from the remote device. int bytesRead = client.EndReceive(ar); if (bytesRead > 0) { // There might be more data, so store the data received so far. state.sb.Append(Encoding.ASCII.GetString(state.buffer,0,bytesRead)); // Get the rest of the data. client.BeginReceive(state.buffer,0,StateObject.BufferSize,0, new AsyncCallback(ReceiveCallback), state); } else { // All the data has arrived; put it in response. if (state.sb.Length > 1) { response = state.sb.ToString(); } // Signal that all bytes have been received. receiveDone.Set(); } } catch (Exception e) { Console.WriteLine(e.ToString()); } } While the devarticles.com tutorial passes null for the last parameter of the BeginReceive method, and goes on to explain that the last parameter is useful when we're dealing with multiple sockets. Now my questions are: What is the point of passing a state to the BeginReceive method if we're only working with a single socket? Is it to avoid using a class field? It seems like there's little point in doing it, but maybe I'm missing something. How can the state parameter help when dealing with multiple sockets? If I'm calling client.BeginReceive(...), won't all the data be read from the client socket? The devarticles.com tutorial makes it sound like in this call: m_asynResult = m_socClient.BeginReceive (theSocPkt.dataBuffer,0,theSocPkt.dataBuffer.Length, SocketFlags.None,pfnCallBack,theSocPkt); Data will be read from the theSocPkt.thisSocket socket, instead of from the m_socClient socket. In their example the two are one and the same, but what happens if that is not the case? I just don't really see where that last argument is useful or at least how it helps with multiple sockets. If I have multiple sockets, I still need to call BeginReceive on each of them, right?

    Read the article

  • Design question for WinForms (C#) app, using Entity Framework

    - by cdotlister
    I am planning on writing a small home budget application for myself, as a learning excercise. I have built my database (SQL Server), and written a small console application to interact with it, and test out scenarios on my database. Once I am happy, my next step would be to start building the application - but I am already wondering what the best/standard design would be. I am palnning on using Entity Framework for handling my database entities... then linq to sql/objects for getting the data, all running under a WinForms (for now) application. My plan (I've never used EF... and most of my development background is Web apps) is to have my database... with Entity Framework in it's own project.. which has the connection to the database. This project would expose methods such as 'GetAccount()', 'GetAccount(int accountId)' etc. I'd then have a service project that references my EF project. And on top of that, my GUI project, which makes the calls to my service project. But I am stuck. Lets say I have a screen that displays a list of Account types (Debit, Credit, Loan...). Once I have selected one, the next drop down shows a list of accounts I have that suite that account type. So, my OnChange event on my DropDown on the account type control will make a call to the serviceLayer project, 'GetAccountTypes()', and I would expect back a List< of Account Types. However, the AccountType object ... what is that? That can't be the AccountType object from my EF project, as my GUI project doesn't have reference to it. Would I have to have some sort of Shared Library, shared between my GUI and my Service project, with a custom built AccountType object? The GUI can then expect back a list of these. So my service layer would have a method: public List<AccountType> GetAccountTypes() That would then make a call to a custom method in my EF project, which would probably be the same as the above method, except, it returns an list of EF.Data.AccountType (The Entity Framework generated Account Type object). The method would then have the linq code to get the data as I want it. Then my service layer will get that object, and transform it unto my custom AccountType object, and return it to the GUI. Does that sound at all like a good plan?

    Read the article

  • Adb shell commands to change settings or perform tasks on a phone

    - by Noah
    How do I use adb to perform some automated tasks on my android phone? I need to find commands that I can issue from the command line (ideally, using a .bat file) that will be capable of more than simply opening an application or sending an input keyevent (button press). For instance, I want to toggle Airplane Mode on or off from the command line. Currently, the best I can do is launch the Wireless & network settings menu and then use input keyevents to click Airplane mode: adb shell am start -a android.settings.AIRPLANE_MODE_SETTINGS adb shell input keyevent 19 & adb shell input keyevent 23 There are quite a few drawbacks to this method, primarily that the screen has to be on and unlocked. Also, the tasks I want to do are much broader than this simple example. Other things I'd like to do if possible: 1.Play an mp3 and set it on repeat. Current solution: adb shell am start -n com.android.music/.MusicBrowserActivity adb shell input keyevent 84 adb shell input keyevent 56 & adb shell input keyevent 66 & adb shell input keyevent 67 & adb shell input keyevent 19 adb shell input keyevent 23 & adb shell input keyevent 21 adb shell input keyevent 19 & adb shell input keyevent 19 & adb shell input keyevent 19 & adb shell input keyevent 22 & adb shell input keyevent 22 & adb shell input keyevent 23 & adb shell input keyevent 23 2.Play a video. (current solution: open MediaGallery, send keyevents, similar to above) 3.Change the volume (current solution: send volume-up button keyevents) 4.Change the display timeout (current solution: open sound & display settings, send keyevents) As before, these all require the screen to be on and unlocked. The other major drawback to using keyevents is if the UI of the application is changed, the keyevents will no longer perform the correct function. If there is no easier way to do these sort of things, is there at least a way to turn the screen on (using adb) when it is off? Or to have keyevents still work when the screen is off? I'm not very familiar with java. That said, I've seen code like the following (source: http://yenliangl.blogspot.com/2009/12/toggle-airplane-mode.html) to change a setting on the phone: Settings.System.putInt(Settings.System.AIRPLANE_MODE_ON, 1 /* 1 or 0 */); How do I translate something like the above into an adb shell command? Is this possible, or the wrong way to think about it? I can provide more details if needed. Thanks!

    Read the article

  • When is it worth using a BindingSource?

    - by Justin
    I think I understand well enough what the BindingSource class does - i.e. provide a layer of indirection between a data source and a UI control. It implements the IBindingList interface and therefore also provides support for sorting. And I've used it frequently enough, without too many problems. But I'm wondering if I use it more often than I should. Perhaps an example would help. Let's say I have just a simple textbox on a form (using WinForms), and I'd like to bind that textbox to a simple property inside a class that returns a string. Is it worth using a BindingSource in this situation? Now let's say I have a grid on my form, and I'd like to bind it to a DataTable. Should I use a BindingSource now? In the latter case, I probably would not use a BindingSource, as a DataTable, from what I can gather, provides the same functionality that the BindingSource itself would. The DataTable will fire the the right events when a row is added, deleted, etc so that the grid will automatically update. But in the first case with the textbox being bound to a string, I would probably have the class that contains the string property implement INotifyPropertyChanged, so that it could fire the PropertyChanged event when the string changes. I would use a BindingSource so that it could listen to these PropertyChanged events so that it could update the textbox automatically when the string changes. How does this sound so far? I still feel like there's a gap in my understanding that's preventing me from seeing the whole picture. This has been a pretty vague question so far, so I'll try to ask some more specific questions - ideally the answers will reference the above examples or something similar... (1) Is it worth using a BindingSource in either of the above examples? (2) It seems that developers just "assume" that the DataTable class will do the right thing, in firing PropertyChanged events at the right time. How does one know if a data source is capable of doing this? Is there a particular interface that a data source should implement in order for developers to be able to assume this behaviour? (3) Does it matter what Control is being bound to, when considering whether or not to use a BindingSource? Or is it only the data source that should affect the decision? Perhaps the answer is (and this would seem logical enough): the Control needs to be intelligent enough to listen to the PropertyChanged events, otherwise a BindingSource is required. So how does one tell if the Control is capable of doing this? Again, is there a particular interface that developers can look for that the Control must implement? It is this confusion that has, in the past, led to me always using a BindingSource. But I'd like to understand better exactly when to use one, so that I do so only when necessary.

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >