Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 150/328 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Why my laptop doesnt boot in any OS (windows or ubuntu) after RAM upgrade?

  - by qrsq

  My laptop previously had 2 slots of RAM ( 1x1Gb , 1x2GB , both were clocked at 1066mhz) and it was working on windows 7 x86 OS. I Upgraded the ram with ( 2x4GB clcoked at 1333mhz). Bios displayed 8192MB of memory and windows was working ok but (only 2.99GB of ram from 8gb was avabile). So i decided to switch to an x64 system to be able to use all the amount of memory. But the laptop wasnt able to install any os (windows 7 x64 or windows 8 x64) so i placed the 3gb of ram instead of 8gb. Then i succesfully instaled an x64 os (windows 8). After than i placed the 8gb ram back again. Now the computer doesnt boot in the os but bios is working normally. I tried also to install ubuntu , without any succes. What should i do ?? All the help will be appreciated. thanks

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• How to benchmark apache/nginx setup

  - by Saif Bechan

  I am planning to setup nginx as reverse proxy. I will have apache to deliver my dynamic content, and nginx will deliver the static content. My configuration i have now is just Apache with fastCGI. This gives me no configuration problems and runs great. After I have set up nginx I want to run some benchmarks to see if I really got some performance increases, else i will switch back. Does anyone know how I can benchmark this type of setup? Or maybe someone did this already and have some canned results, I will be glad to hear them.

  Read the article

• gnu screen - mouse does not work in nested screen session

  - by Matthew

  I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

  Read the article

• Does /NOCANDY avoid any adware-related activities with OpenCandy?

  - by Andrew Grimm

  OpenCandy claims that using the /NOCANDY switch when using a OpenCandy-affiliated installer allows you to avoid opencandy. Should I take their word for it? If not, can anyone independent of OpenCandy and their affiliates verify that /NOCANDY works? Background: About to install WinSCP onto a fresh Windows installation, and found out that new versions have OpenCandy associated with their installer. For the sake of balance, here's a link to WinSCP's FAQ on OpenCandy. The claim about /NOCANDY working appears on WinSCP's web site, but the same boilerplate appears on other OpenCandy web sites. If the OpenCandy people are offended by the tag "spyare": sorry, but it's the main tag here, rather than "adware".

  Read the article

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• Safari MAC proxy bypass for IPv6

  - by rhi

  I'm a first-time n00b on Mac ; (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy, OK. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6 ? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• Share an ATI Catalyst Profile across several/all users

  - by CJM

  We've set up some hotkeys in the ATI Catalyst Control Panel on a communal machine, and we're trying to share this among a number of users, possibly all users. The profile is stored as MyProfile.xml in the Local Settings tree; the profile can be loaded through a shortcut, but unfortunately the Profilename switch simply expects the name of the profile rather than the path to the XML file. And while we can copy the profile to appropriate folders under other users accounts, the mere presence of the XML isn't enough to make the profile available to the user. A quick scan of the registry didn't reveal much, though I suspect there is something in there to be aware of. Any ideas on how we can share this profile?

  Read the article

• Which dbghelp.dll do I use for debugging?

  - by Coldblackice

  I'm trying to configure symbols in Process Explorer. I have the Windows SDK installed (and thus, Debugging Tools). However, there are two versions of dbghelp.dll -- x86 and x64. Which one do I use? Other sources on the net say to just point to the dbghelp.dll that's in the base directory of the Debugging Tools. But there's no such dbghelp.dll -- they're in their respect 32 and 64 bit folders (i.e., C:\Program Files (x86)\Windows Kits\8.0\Debuggers\x64). I'm using a Windows 7 x64 operating system, so does that mean I should load the x64 .dll? Or is it a matter of what I'm debugging? If it is a matter of what I'm debugging, does that mean that I have to switch this .dll depending what process I want to get symbol information on in Process Explorer?

  Read the article

• OS X Money Management Software

  - by Ryan O

  I recently moved from Windows to a Mac, but I still have to keep Virtualbox and Windows installation on the machine to use Quicken. iBank looked promising, but I had problems importing my data from Quicken. I would switch to Mint if they would allow you to enter transactions manually, but the lack of that feature is a deal breaker. (I use Quicken primarily to track uncleared transactions, with the bonus of reporting on past spending.) Is there any other software I should try that will be able to import at least most of my old data from Quicken? Edit: For what it's worth, I never did find anything else. Quicken Essentials for Mac was released this year, but doesn't handle investments well from what I hear. I'm now on Quicken 2010 under XP running inside Virtualbox. It's not ideal, but it seems to be the only thing around right now that meets my needs.

  Read the article

• Memory consumption of each accept() call on server running on Windows 2008 [migrated]

  - by Atul

  I've written a simple and small server application on Windows 2008 that just accepts connections and does nothing else. I am doing memory footprint assessment of socket calls, What I found that each connection (after accept()) consumes at least 2.5 KB of memory. Interestingly, the memory is not consumed by the process that has accept() call but it consumed by a OS process. I believe it might be because of data structures being created inside OS for each connection. Now, I have two key questions: Is it possible by any means to reduce this memory footprint (by changing any parameters, configuration etc) ? If yes how ? (Because 2K for each connection would be too much if we planning server to accept millions of connections) If my server is intended to accept million connections, is it good idea to use Windows 2008 ? or shall I switch to some other OS? Please advice me.

  Read the article

• Autonegotiate errors between HP and Cisco hardware?

  - by Satanicpuppy

  This is a bit of a specific extension to this question. I've got two ASA's that feed into a Procurve switch, and then into an IPS. All is well except that the procurve absolutely refuses to autonegotiate with the ASA's...The asa's run 100full, and the procurve autonegotiates to 100half. It does it for both ASA's, so it's probably not a failure on one of them, and everything works fine if I force the procurve to 100full. Has anyone else seen this issue? I've been buying more HP hardware, but I'm not keen on getting equipment that's not going to play nice with my Cisco backbone.

  Read the article

• Is it possible to set a SRV record with xname.org

  - by Emilien

  According to XName's (not up-to-date) ChangeLog Thu Oct 19 2006 Yann Hirou ([email protected]) Adding SRV records - including modification of dns_records it appears to be possible to set a SRV record for one of your zones. However, I just can't find a way to do this in the UI. I've contacted Yann Hirou, but didn't receive any answer (he is either submerged by emails, or only responds to "paying supporters") It might be that the feature is available in the source code, but that the instance running on XName has not been updated (since 2006?) Has anyone using XName been able to set up such records? Otherwise I might be forced to switch to another free DNS service...

  Read the article

• FortiGate firewall configuration with /30 and /28 networks

  - by slyderc

  I have fiber coming in from a new ISP which is being handed off via Ethernet on a single physical port. I'm having doubts about how to approach the configuration on my FortiGate 200A firewall because I've been given a /30 containing the ISP's gateway and another /28 for external IPs I can use: x.y.76.12/30 (.13 is the GW) x.y.76.64/28 (public IP space) How do I configure the FG200A's WAN1 interface to be aware of the two networks? As I only have one physical ISP port, will I need to plug it into a switch to break-out two cables and use a DMZ port on the FG200A for setting up the /28? Thanks in advance for your insight!

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

  - by Anx Ara

  I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

  Read the article

• OSX Keyboard Shortcuts in Dialogs?

  - by Dan Fabulich

  On Windows, every dialog box includes underlined letters that you can activate using the Alt key. I use these "Alt" keyboard shortcuts all the time; I'm missing them as I'm trying to switch to OSX. On OSX, all I can find is Tab navigation, which requires you to press Tab seven or eight times to get anywhere in most dialog boxes. (And even that is hidden by default: you have to enable "Full keyboard access" in the "Keyboard & Mouse" control panel to be able to Tab between buttons.) Is there some way I can get something like the Windows Alt accelerators for OSX dialogs? I'm willing to write Automator code, download/purchase software, etc. Specifically, I'm imagining maybe something where you do some shortcut command and then start typing the name of the button, and hit Enter to push the button...?

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Connect work laptop (domain) to home workgroup

  - by jjeaton

  Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

  Read the article

• How to route traffic from a subnet 10.0.0.x to a network 200.208.88.17

  - by Guilherme Longo

  I have the following configuration Router : IP: 200.208.88.17 (Internet) MASK: 255.255.255.40 Server 2003 : IP: 10.0.0.1 (with dhcp server ativated) dhcp scope: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 clients : IP: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 At this point I have all computer set-up in one switch. All clients are receiving ip´s from the dhcp server. I need to enable the internet in every client. I am not sure how to route the traffic from the clients to the router that is providing internet access. Could you please point me to the right direction?

  Read the article

• Bash: Variable substitution in variable name with default value

  - by krissi

  i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >