Search Results

Search found 21349 results on 854 pages for 'thought space designs'.

Page 150/854 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• SSD Drive not being recongized in BIOS

  - by chobo2

  Well I bought my first drive Mushkin Chronos 180GB and got it installed in my computer and loaded up. I went to windows 7 and initialized the drive and then I installed "SSDlife Free" and loaded it up and my the SSD drive came up said it was "powered on 3 times"(thought it was odd but then thought maybe some testing???). I then restarted my computer and loaded into Acronis. Went to my SSD drive and make a partition called windows(made a basic logical partition). I then loaded up Norton ghost and wanted to copy my current windows onto the SSD drive on the partition I made found out I could not do it through the recovery disk so I made a backup of my windows drive and wanted to then restore it onto the SSD drive. Came back an hour later when the backup was done. I tried to restore the it on my SSD drive and could not find the partition so I loaded up Acronis again and it did not see it. I then went to the bios and saw only my other hard drive. What I tried Tried uplugging and replugging in both sata and power cables. Tried using the power and sata cable from the working drive and giving it the ones that SSD drive were using. Tried Sata AHCI Mode (Intel ICH9 Southbridge) Tried SATA PORT0-1 NATIVE MODE (Intel ICH9 Southbridge) Nothing worked. Software / hardware Windows 7 ultimate Gigabyte S-Series GA-P35-DS3L Mother board I hope someone has some ideas on why it is not being recognized.

  Read the article

• Can I trick Carbonite into backing up an external hard drive?

  - by Brian

  I use Carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 GB), so I went out and purchased an external hard drive. However, Carbonite will not back it up. Is it possible to set up Carbonite to backup an external hard drive? I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• Parallels Plesk returning strange numbers

  - by Jack W-H

  Hi everyone, As a relatively new Server Admin I've become a bit confused by some statistics Parallels Plesk Panel 10.0.1 is returning to me. I have a domain ('subscription') set up, mysite.com. Mysite.com only hosts files, mostly images Its file contents use up about 390MB of disk space Here's a screenshot: this is what Plesk is reporting mysite.com to use: And some more info: Now this is pretty confusing... I thought at first my site might have been hacked and had contents written to disk, but I checked and all is in order, nothing has been hacked into as far as I can tell. So I had a look in the site's CP for some more in-depth statistics, and this is what's returned... Now - sod's law - when I go to check my disk space statistics in more depth via the control panel, this morning it says "The data were not collected yet." - not too sure what that means, but, last night when I checked it was reporting something odd. It said Files were using up 390MB, but 1.80GB or so were being used up by 'Mail Accounts'. This is really strange, as there are no mail accounts set up for the domain. The only hint of 'mail' there is, is the catchall set up to forward *@mysite.com to a separate, ISP-hosted email account. Any ideas anybody? I can post more details if you need it. Sorry to be a bit vague but I'm not sure what else I can post. Thanks, Jack

  Read the article

• What is the best way to create a failover cluster for my IIS website?

  - by ObligatoryMoniker

  Our eCommerce website www.tervis.com currently runs on two servers: SQL server: 2005 x 86 on Windows Server 2003 Standard x86 with a single dual core processor and 4 gb of memeory IIS server: Windows Server 2008 Web edition x64 with dual quad core hyper threaded processors and 32 gb of memory Tervis.com's revenue has steadily grown to the point where we need to have redundant servers deployed with a fail over mechanism so that we do not have any down time. Because the SQL server is so underpowered compared to the web server my thought was to purchase: 2 x SQL Server 2008 R2 web edition x64 single processor license 2 x Windows Server 2008 R2 Web Edition Licenses 1 x New Physical dual quad core 32 GB server 1 x F5 Load Balancer I need the Windows Server 2008 R2 Web Edition licenses so that I can run SQL and IIS on the same box for both of these servers. The thought is to run this as an active/passive fail over cluster that could be upgraded to an active/active cluster if we purchased the additional SQL licensing. The F5 load balancer would serve as the device that monitors the two servers and if the current active one stops responding then fails over to using the other server. To be clear this is not windows clustering but simply using a load balancer to fail over between two computers so that you now have a cluster in the general sense. Is this really the best way to accomplish what I need? Is there some way to leverage the old server 2003 SQL server to function as the devices that funnels http requests to the appropriate active server and then fails over if a problem occurs? Is there any third party clustering software that might help me accomplish this in a simpler fashion?

  Read the article

• Tool to Save a Range of Disk Clusters to a File

  - by Synetech inc.

  Hi, Yesterday I deleted a (fragmented) archive file only to find that it did not extract correctly, so I was left stranded. Fortunately there was not much space free on the drive, so most of the space marked as free was from the now-deleted archive. I pulled up a disk editor and—painfully—managed to get a list of cluster ranges from the FAT that were marked as unused. My task then was to save these ranges of clusters to files so that I could examine them to try to determine which parts were from the archive and recombine them to attempt to restore the deleted file. This turned out to be a huge pain in the butt because the disk editor did not have the ability to select a range of clusters, so I had to navigate to the start of each cluster and hold down Ctrl+Shift+PgDn until I reached the end of the range (which usually took forever!) I did a quick Google search to see if I could find a command-line tool (preferably with Windows and DOS versions) that would allow me to issue a commands such as: SAVESECT -c 0xBEEF 0xCAFE FOO.BAR ::save clusters 0xBEEF-0xCAFE to FOO.BAR SAVESECT -s 1111 9876 BAZ.BIN ::save sectors 1111-9876 to BAZ.BIN Sadly my search came up empty. Any ideas? Thanks!

  Read the article

• File Replication Service Errors

  - by ekamtaj

  Hey Guys, We have a windows 2003 r2 server and couple of the users are reporting that they can not scan files into the windwos server. They are getting an Out of Space errors. I took a look at the server and we have 600GB free disk space on that partition. But while looking at the event log I found a lot of errors like (13552,13555) The File Replication Service is unable to add this computer to the following replica set: "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" This could be caused by a number of problems such as: -- an invalid root path, -- a missing directory, -- a missing disk volume, -- a file system on the volume that does not support NTFS 5.0 The information below may help to resolve the problem: Computer DNS name is "server.domain.local" Replica set member name is "server" Replica set root path is "c:\windows\sysvol\domain" Replica staging directory path is "c:\windows\sysvol\staging\domain" Replica working directory path is "c:\windows\ntfrs\jet" Windows error status code is FRS error status code is FrsErrorMismatchedJournalId Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Do you really need cable management for a cabinet with just switches and patch panels?

  - by ObligatoryMoniker

  We are about to start wiring out a building expansion and our vendor has laid out the racks in the following configuration: Option 1 1U Fiber patch panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 1U 48 port Switch 2U Cable Manager 1U 48 port Switch Total = 15U All the patch panels would be connected to the switches with 1ft+ cables fed through cable management. What I am considering instead is: Option 2 1U Fiber patch panel 1U 24 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel Total = 8U All of the patch panels would be connected to the switches with .5 ft cables directly on their face with the top 24 ports of each switch patched to the patch panel above it and the bottom 24 ports of each switch patched to the patch panel beneath it which would not require any cable management. If I go with option 2 it save all of the space used by cable management and allows us to keep adding on switches and patch panels at the end without having to re-cable all of the patch panels above. Our vendor has indicated that this is not best practice and that .5ft cables will introduce cross talk. I could understand that being the case if we were connecting the .5 ft cable directly into another switch but we are connecting it to a patch panel that likely has another 150 ft cable run from the back of the patch panel out to the port in the building in which case the real resulting cable is 150.5 ft at minimum before even connecting it to a PC. It seems like it makes much more sense to go with option 2. It is easier to expand, saves space, and saves money on cabling and cable management. Does this kind of configuration make sense or is there a legitimate reason to choose Option 1 over Option 2?

  Read the article

• FastGate A20 Line And Himem.sys Issue With Updating BIOS

  - by Boris_yo

  I have been persistent with a thought to perform my first BIOS update ever through MS-DOS but have been postponing this task until today. Despite people telling me any bootable ISO will do it either through CD-ROM or RAMDRIVE, I am still having problems. First is the problem with CD-ROM driver trying to make it work with 4 driver files (cd1.SYS, cd2.SYS, cd3.SYS, cd4.SYS) as well as starting RAMDISK proved to be failure: CD-ROM XMS Allocation Error RAMDISK XMS Allocaton Error (X: and R: drives not working) This A20 line seemed to be the obstacle which then after a couple of searches pointed me to this article on Microsoft website. It seems that FastGate is the culprit which takes over A20 line and conflicts with himem.sys which should be handling it causing the driver to be unable to allocate memory resources. Albeit article suggests 2 workarounds which is disabling FastGate option or adding switch, I read that the former workaround could cause problems which involves later tinkering BIOS, disabling shadow copy etc. while the latter workaround can just hang system as stated in the link above. I assume it just hangs the boot process from image file though. Summing up the above, I am cautious and think it is risky to follow both workarounds because disabling FastGate or trying adding switch by trying available switches from 1-14 or 16, could crash the BIOS update process by itself. I could do this without the need for himem.sys with bootable USB thumbdrive by making it to be seen as USB-HDD, but some time ago I read that it is never a good idea to update BIOS from hard drive so even thought it is simulation, who knows... Maybe it will deactivate hard drive in the middle of the BIOS update process or even USB thumbdrive per se? One forum discussion was about updating BIOS and somebody suggested to not load himem.sys for some reason, but now that I think of it, what if BIOS update needs upper memory?

  Read the article

• Connecting to my home router web interface from work

  - by Joe

  Hi, I'm trying to connect to my home router web interface from work. I use dyndns, because I don't have a static IP at home, and it works perfectly from any other place except my workplace (update: I made a mistake, see edit below). When trying to access the web interface from work I get a "500 Server Error" with the code: SERVER_RESPONSE_RESET. I'm not trying to use any protocols such as remote desktop, I'm only trying to access the web interface. I can access any other web page from my workplace with no problems, and I think my router web interface is like any other web page, isn't it? I thought maybe my work place proxy blocks addresses of services like dyndns, so I also applied another trick. Since I have a web page on my own domain (say www.mydomain.com) which I can access from work, I tried adding a CNAME to my domain which is linked to the dyndns address (router.mydomain.com). This way if anyone enters the address router.mydomain.com from anywhere, they reach my home router web interface, and there's no way of knowing it's a dyndns address (or is there?). However, it still doesn't work from my workplace (I get the same error message). Any ides? Edit: I'm sorry to say I made a mistake earlier. I used to be able to access my home router web interface from my old workplace, and I thought it was still possible since I don't recall making any configuration changes. However, after reading the replies, I went over to my old workplace and checked, and it doesn't work from there either. I'm very sorry for giving out wrong and misleading information about my problem. So to summarize: my problem is that I can't access my home router web interface from anywhere.

  Read the article

• Build suggestion for mini itx server [on hold]

  - by Spyros

  I am looking to create a home server and since there does not seem to be a nice ready made one to purchase, i thought of building a mini itx one. I am not familiar with the best hardware/case to pick and therefore i thought i would ask for your experience. I will most probably install a simple linux distro, probably Debian and most probably without a desktop environment as well. Therefore, I am not looking for the best graphics card, though a decent one is preferred for sure. I would say that the most important thing is that the case/hardware play well with each other and the machine has decent specs ( i think something like 8gb RAM and 1TB hdd is most probably my most important things). I understand that this question can be closed as subjective, but it would be a great help for me if some of you guys who have been doing a similar build, can suggest something. I tried to find a stack exchange variant for the question, but it seems that this one more closely relates to the subject. But I will definitely understand it if people close it due to being subjective in nature. If you can maybe move it somewhere or so, please feel free to do so. Thank you for your time :)

  Read the article

• windows 7 update freeze - what to do?

  - by Tom Tom

  Hi, yesterday I shuted down my notebook and windows 7 Ultimate started to install the automatic update. After one hour I noticed that the update is still running. I thought ok, I go to sleep and let it run. In the morning it was still running. Thus I thought it is crashed. Forced a shut-down of the notebook, and restarted it. With the same effect that the notebook is "freezing" at "Install Update 1 of 5". It does not look like whether it is chrased. The progress wheel is still moving. But it does not make any progres.. Thus somehow like crashed. Would appreciate any help! Edit: Ok was able to log-in in "save" (german: abgesicherter) mode. This way I passed to install update screen. I do not want to generally disable updates. What can I do to not install the last update, which is creating troube. Or how can I find out whats the problem with the last update? Edit2: Ok starting in save mode and finally installing the updates manually solved the problem.

  Read the article

• Is there a way to exclude a specific drive vdi from "snapshots" in VirtualBox?

  - by Graza

  ...or is there another space-efficient way of dealing with the page/swap file of the Guest O/S? I've realised that its quite possible/likely that one of the things which "bloats" the snapshot/diff vdi's when a snapshot is taken is the guest operating system's pagefile. For example, say I have a 2Gb swap-file in a Windows guest OS, and over the course of a few weeks the usage of the swap file has gone over 1Gb a couple of times. When I next create a snapshot, it seems likely that I'd be almost guaranteed around 1Gb of space taken up in the new differencing disk just because of changes in the swap file. Obviously (provided I never did "live" snapshots on running or paused machines, and only ever did them when the machine was shut down), I would not need any of the information in the swap file to be saved. So this would simply be a waste of 1Gb. I'm wondering if there's a way to attach a vdi to a VM and flag it as "exclude from snapshots" - which would mean I could put the swap file on a different vdi which would never be included in a snapshot. Or if anyone has any other suggestions. Or an explanation about why it might not be an issue. I could obviously delete and recreate a swap drive vdi every time I did a snapshot to achieve the same effect, but this is a little more effort than simply clicking "create snapshot"....

  Read the article

• Why might my Fedora 15 live USB persistent storage not work?

  - by Richard J Foster

  I created a Fedora 15 "live" USB stick using the live USB creator found at https://fedorahosted.org/liveusb-creator/ and the Fedora 15 i686 Desktop ISO image with the persistent storage space set to 4096MB. (The USB stick I have available has an 8GB capacity, so there should be plenty of space.) Fedora appears to boot correctly, however it seems that the persistent storage is not working. To verify this, I opened a terminal prompt, then did su - followed by yum update yum. As expected, I was informed that a new version was available. (The live CD contains version 3.2.29-4, at the time of typing 3.2.29-6 is the current version). After installing, I verified that the new version was installed by typing yum --version. I then shutdown the system using shutdown now. After the system had shut down, I rebooted and returned to the terminal prompt. On typing yum --version, I was informed that the version was 3.2.29-4 (i.e. the original version). Why might the persistent storage not be working? Is there anything I can do to fix it?

  Read the article

• How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

  - by McCoy

  Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• Send keystrokes simultaneously to both host and slave over internet?

  - by donodarazao

  I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

  Read the article

• Which upgrade path for disk IO bound postgres server?

  - by user41679

  Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

  Read the article

• Are my Linux symbolic links acting correctly?

  - by Andy Castles

  Hi all I've been using Linux on and off for the last 15 years and today I came across something in bash that surprised me. Setup the following directory structure: $ cd /tmp $ mkdir /tmp/symlinktest $ mkdir /tmp/symlinktest/dir $ mkdir /tmp/symlinktarget Now create two sym links in symlinktest pointing to symlinktarget: $ cd /tmp/symlinktest $ ln -s ../symlinktarget Asym $ ln -s ../symlinktarget Bsym Now, in bash, the following tab completion does strange things. Type the following: $ cd dir $ cd ../A[TAB] Pressing the tab key above completes the line to: $ cd ../Asym/ as I expected. Now press enter to change into Asym and type: $ cd ../B[TAB] This time pressing the tab key completes the link to: $ cd ../Bsym[space] Note that there is now a space after the Bsym and there is no trailing slash. My question is, why when changing from the physical directory "dir" to Asym it recognises that Asym is a link to a directory, but when changing from one sym link to another, it doesn't recognise that it's a link to a directory? In addition, if I try to create a new file within Asym, I get an error message: $ cd /tmp/symlinktest/Asym $ cat hello > ../Bsym/file.txt -bash: ../Bsym/file.txt: No such file or directory I always thought that symlinks were mostly transparent except to programs that need to manipulate them. Is this normal behaviour? Many thanks, Andy

  Read the article

• Errors with Using Webcam

  - by C.G.

  I have been having some issues accessing a webcam from my machine. Sometimes (not always) when I run a program that accesses the device (cheese, guvcview, and code using openCV), I get either of two messages, which lead to the program crashing. The first occurs after running the webcam for some time. libv4l2: error dequeuing buf: No such device VIDIOC_DQBUF: No such device The other will occur without even letting me have a chance to run the webcam. libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON - Unable to start capture: No space left on device Occasionally after getting these errors I will also receive a message saying that no such device can be found for subsequent runs. Other than the times that the "No device found" message appears the webcam appears when I use lsusb. My machine runs Linux Fedora 16, and the webcam is a Logitech C920. I do have ffmpeg installed, and I have been able to run the web camera many times in the past without errors. What is particularly puzzling about these errors is that they just sprung up this past weekend. No new software or hardware has been installed on this machine recently; I haven't changed any settings recently either. It could possibly be a driver issue, but I don't know what could have changed which could lead to this issue. Any attempts at researching this problem has been fruitless as this seems to most commonly occur with multiple webcams. I am only working with one device. I'd appreciate any advice for this problem, as this has become a bit frustrating.

  Read the article

• VPN Client solution

  - by realtek

  I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

  Read the article

• Emptying Windows temp folder is a good idea?

  - by Siva Charan

  Am using DELL Inspiron with Windows 7. As far as I know emptying the windows temp folder would be good. But I faced a strange behaviour around 8 months back, when I clear my windows temp folder. The next day onwards, my laptop starting displaying daily one or other errors and one day OS got crashed. Till now I am not sure whether OS got crashed due to clearing the windows temp folder or something else is problem. Here Windows temp folder mean "C:\Windows\Temp" This is the behind the story. Today, this temp folder "C:\Windows\Temp" contains 102 GB Most of the space occupied by the files starts with etilqs_*.*. I came to know that these files are generated due to WD SmartWare. Now my problem is:- Actually I want clean up this folder, since it occupies lot of space. If I clean up "C:\Windows\Temp" folder, will my laptop face the same kind of problem which I faced earlier OR Any new problems will occur? Please suggest me a good solution.

  Read the article

• Compiling linux kernel, how much size is needed?

  - by ant2009

  Hello, I am have downloaded the newest most stable linux kernel 2.6.33.2 I thought I would test this using virtualbox. So I create a dynamically sized harddisk of 4gb. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4gb, but the actual size is 3.5gb $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a linux kernel? Is there any guidelines to follow when doing this? This is my first time, so just experimenting with this. Many thanks,

  Read the article

• Recover data from a Thecus N4100 NAS jbod partition

  - by TimothyP

  I have a Thecus N4100 NAS wich had a 2TB drive in it configured as jbod partition. Later I tried adding a second drive to expand the available space. I added it to the jbod configuration but I did not get any extra space. Then I tried removing the second drive but then the NAS system indicated the jbod configuration was damaged. After a reboot it told me there is no configuration and I need to create a new RAID/jbod configuration and that I would lose all data on the drive. Of course I did not do this, I took the 2TB drive and checked with Linux if the partition was still there and it is... completely intact. I found that linux recognizes it as a /dev/mdX device and that I should be able to mount it but I don't know the file system type. Anyway.... is there a way to recover the data? Since everything has always been on a single drive it should all be there right? I can connect the drive to Windows , Linux or MacOS so whatever gets the job done.

  Read the article

• Word 2010, Multiple Columns, Vertical center one column only

  - by Nancy N Jones

  I am creating a document with two columns in Microsoft Word 2010. I want the first column to be centered vertically. I want the second column to be on the same page and the vertical placement to be from the top. I highlight my text in the first column that I want centered vertically, then go to Page Layout Margins Custom Margins Layout, you can choose to center the vertical alignment. I have choosen the "Section Start" to be "Column" and also tried "Continuous." In all cases it always shifts all of my second column information to a new page. I don't want my second column text to be on a new page, I want it to be on the same page and vertically aligned from the top--not the center. Am I understanding the functionality of the Section Start on the Layout tab correctly? Maybe the page layout isn't the correct formatting to use. What I am really doing is formatting columns. I haven't found anywhere to format the columns for this. Am I missing some important column formatting features? I know that I can use the paragraph formatting and add space above the first line of text to make it look like it is centered vertically. However, this is a template for a master document and will be changed frequently. I really would like the first column text to be automatically formatted to be centered vertically without having to go in and manually change the space above the paragraph every time. Your assistance would be greatly appreciated.

  Read the article

• why does my computer crash?

  - by chobo2

  Hi my computer keeps crashing and I don't know why. At first I thought because I had my cpu over clocked that it all of sudden was crashing. So I set my cpu back to regular speed. This did not help. I then thought it was because 2 sticks of my memory where from a computer that suffered from a power surge. However I just ran the windows memory diagnostic tool( extended) and after like 6 hours of testing my memory it found no errors. So now the only thing that is left is windows 7 64bit. I first over clocked my cpu for a couple months while running XP. Never had a problem. I installed the memory and windows 7 at the same time. But I not sure if it is my memory now since it passed the diagnostic tests. However I am not sure if it is windows 7 either has I installed it twice in the last year. I really don't want to go back to XP to find out if this is the case. So here are my blue screens of deaths(from bluescreen). https://sites.google.com/site/myerrorswin7/errors (I hope you enjoy my great site lol) As you can see most of them are different NTFS_FILE_SYSTEM KMODE_EXCEPTION_NOT_HANDLED BAD_POOL_HEADER IRQL_NOT_LESS_OR_EQUAL SYSTEM_THREAD_EXCEPTION_NOT_HANDLED SYSTEM_SERVICE_EXCEPTION

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >