Search Results

Search found 53148 results on 2126 pages for 'ubuntu 10 4'.

Page 150/2126 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

    - by user1292548
    I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

    Read the article

  • no wifi after grub 2 crash

    - by Omu
    on ubuntu 10.10 I used StartupManager to set windows 7 as the default boot, also chosen the 1024x768 resolution, 16 bit, time: 3sec, and checked "show splash screen". after the restart there was no GRUB menu at all, windows 7 booted, and in windows the clock was 0:03 instead of 10:03, also the wifi doesn't sees any connections anymore I reinstalled ubuntu 10.10 so the GRUB menu is back, changed the clock back from BIOS, but my wifi doesn't sees any connections in windows nor in ubuntu (I write this from another computer)

    Read the article

  • new installation won't sync directories with my account

    - by barrydrake
    I had a dual-boot arrangement on my desktop with 12.04 and 12.10 (testing). Last week, I managed to trash both and ended up re-installing both. After doing all the updates, I activated Ubuntu-one which worked just fine on the previous installations. On both 12.04 and 12.10, the Ubuntu-One window fails to show the folders for syncing and only syncs the Ubuntu-One folder. Adding a folder on my net book on which sync is working properly brings up a pop up on my desktop that tells me a new folder is available for syncing - but the Ubuntu window fails to show it. I have put a screenshot from my net book (working OK) and one from my desktop which shows the problem. Any suggestions please?

    Read the article

  • ROOT_MISMATCH error after following FAQ directions

    - by Adko
    While using Ubuntu One in 11.04 I am unable to change my account info. When I made the switch to 11.04 I forgot that I already had an Ubuntu One account so, I made a new one. However, upon going through one of my email accounts I found my old Ubuntu One login information. I then attempted to switch the account associated with my desktop to my first email. Now, despite following the directions found at https://wiki.ubuntu.com/UbuntuOne/FAQ/WhatToDoWhenSyncdaemonSaysRootMismatch I continue to get the error "File sync error. (local and server roots are different (ROOT_MISMATCH))". Any help would be appreciated.

    Read the article

  • After update, grub is broken.

    - by Bryan Allan
    Some months back I used wubi to install ubuntu on an hp laptop with vista. After not using it for a month or so, I loaded ubuntu and installed many updates (including kernel update). Windows boot manager loads without any problems, and I can boot to vista without problems. However, if I choose ubuntu, the screen briefly flashes Try (hd0,0) : NTFS5 and then goes to black. I never get to the kernel image selection screen.

    Read the article

  • How to list Windows shares from terminal?

    - by Zabba
    Here is a simple scenario I have: Windows 7 is sharing a folder (D:\Projects). Full Control permissions have been given to the folder. In Ubuntu 10.10, I can see the Windows shares from Places - Network menu. I can create a folder in the shared Projects folder from Nautilus How do I ls those same folders (displayed in Nautilus) from the terminal? (mount and ls /mnt do not list those Windows shares) Ps. Details on what I am doing: Using Ubuntu as a "headless" VM using VirtualBox. Accessing Ubuntu via PuTTY Ability to give complete access to the Ubuntu VM for the Windows shared folder

    Read the article

  • Ubuntu 12.04 takes too long to boot

    - by msPeachy
    I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

    Read the article

  • DVD wont mount Ubuntu 12.04

    - by CyborgGold
    I can't seem to be able to mount my optical drive. I have tried numerous solutions from this site with no results. I am not able to see the device inside the file browser either. There is a DVD in the drive. I am running 12.04 on an HP g60-235dx portable. I have a link below to the specs. I will also list what I have tried (that I can find back right now.) I know the drive is functioning, because just before Windows 7 crashed and my MBR went fubar I was watching movies just fine. I am fairly new to linux, so don't assume I know anything. Ok, so here is what I have tried: sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update sudo apt-get install libdvdcss2 dmesg | grep sr0 (no output) apt-get install libdvdnav4 (already installed, and up to date) sudo /usr/share/doc/libdvdread4/install-css.sh ls -l /dev/cdrom /dev/cdrw /dev/dvd /dev/dvdrw /dev/scd0 /dev/sr0 ls: cannot access /dev/scd0: No such file or directory lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrom -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrw -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvd -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvdrw -> sr0 brw-rw----+ 1 root cdrom 11, 0 Sep 10 03:51 /dev/sr0 wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'TSSTcorp' 'CDDVDW TS-L633M' ------------------------------------------------------------------------- sudo lshw optical *-cdrom description: DVD-RAM writer product: CDDVDW TS-L633M vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc sudo lshw | grep cdrom *-cdrom logical name: /dev/cdrom Spec sheet for portable: http://www.cnet.com/laptops/hp-g60-235dx/4507-3121_7-33496192.html If you need any more information than all of that... please let me know.

    Read the article

  • How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

    - by 770
    I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

    Read the article

  • Ubuntu 12.04 - PPTP VPN is the only Internet Access

    - by user212553
    I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

    Read the article

  • Changing Wallpaper on 12.04 Login Screen

    - by userIsAMonkey
    I'm using this link but seems to be not working on 12.04, here's the Terminal message below: Are there other softwares/tips for changing the login screen? I'm also using link but seems outdated. Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. law@ubuntu:~$ sudo apt-get install simple-lightdm-manager Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package simple-lightdm-manager

    Read the article

  • Low-level 10-finger multi-touch data on the Nexus 7?

    - by Croad Langshan
    I'm considering getting a Nexus 7 to do some multi-touch development on Ubuntu in the run-up to 13.04 (i.e., now :-). What APIs, /dev files, or protocols are available, or could be made available with not too much work on my part? What data is available from the device? The data I want to get my hands on is -- if I can -- the same as I get from /dev/uinput/event* from an Apple Magic Trackpad, viz: positions of all touches (could be as many as 10 simultaneous touches, but much more typically 6 or fewer) their size/pressure (in both x and y directions) their angle their identity -- i.e. an integer that is somewhat reliably preserved across touch events, for as long as a finger doesn't lift off the surface Not all of this data is essential -- but the more of it there is, the merrier.

    Read the article

  • Can't install Ubuntu in Windows 8

    - by user171635
    I’ve been trying to install Ubuntu 13.04 64-bit edition on an ASUS (K53Z) laptop. I have Windows 8 64-bit installed in a non UEFI mode (I think since it starts-up with the Windows logo and I don’t have the UEFI settings). This laptop had installed Windows 7 and when I upgraded it I didn’t knew about the UEFI advantages. I tried several times to install Ubuntu from a USB device and it loads the logo and then I can’t go further in the installation. I thought it was the version of Ubuntu and tried to install Fedora (even if I personally prefer Ubuntu). I had the same problem: Fedora’s logo appears and it gets stuck. I tried also to boot from different USB devices and didn’t work either. My Bios has EFI options to boot but they were not enabled. So I tried to enable them to boot the USB in UEFI mode. A menu shows up with the options of install Ubuntu and try Ubuntu. If I click the Install or try option, I get a black screen and I can’t go further with the install (which I think is normal since I don’t have Windows 8 in EFI mode). My hypothesis is that the Bios isn’t letting Ubuntu write or read from my SSD, because the activity LED in the USB memory is on when it’s loading the installation files. Once the files are ready and the Ubuntu logo is loaded I don’t see a LED activity on neither the SSD or the USB. Thanks If I missed data you can ask me.

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Route all traffic of home network through VPN [migrated]

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Cannot find GRUB - Ubuntu/Windows 8 dual-boot

    - by ubeatlenine
    Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

    Read the article

  • OpenVPN not sending traffic to internet?

    - by coleifer
    I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

    Read the article

  • EasyVPN client Access mutiple subnet behind cisco 5510

    - by zatrac
    I need help with the following scenario Main network ASA 5510 (one inside 192.168.10.1 connection and one outside connection). This ASA 5510 connect to switch 3570 with 3 VLANS configured (192.168.10.0, 10.10.11.0, 10.10.12.0). On the remote site I have ASA5505 ( 10.10.13.0) connected to this ASA5510 through EZVPN, but all it can see is the 192.168.10.0 subnet. What do I need to do to get the subnet 10.10.13.0 to see all 3 internal subnets.

    Read the article

  • Conflicting ip routes with local table on attaching a virtual network interface

    - by user1071840
    I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

    Read the article

  • how to install 'version.h' in ubuntu ?

    - by user252098
    Just now , I try to install the Jungo WinDriver in the Ubuntu 13.10 . But I am puzzled by the its manual of how to Install version.h : Install version.h: The file version.h is created when you first compile the Linux kernel source code. Some distributions provide a compiled kernel without the file version.h. Look under /usr/src/linux/include/linux to see whether you have this file. If you do not, follow these steps: Become super user: $ su Change directory to the Linux source directory: # cd /usr/src/linux Type: # make xconfig Save the configuration by choosing Save and Exit. Type: # make dep Exit super user mode: # exit But the shell says: warning: make dep is unnecessary now. Then, I found out there is a version.h in /usr/src/linux-headers-3.11.0.12-generic, so I type: /usr/src/windriver/redist# ./configure --with-kernel-source=/usr/src/linux-headers-3.11.0.12-generic But, the windriver run fails: USE_KBUILD = yes checking for cpu architecture... x86_64 checking for WinDriver root directory... /usr/src/WinDriver checking for linux kernel source... found at /usr/src/linux checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -s /usr/lib /usr/lib64; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so checking which directories to include... -I/usr/src/linux/include checking linux kernel version... 3.11.10.6 checking for modules installation directory... /lib/modules/3.11.0-12-generic/kernel/drivers/misc checking output directory... LINUX.3.11.0-12-generic.x86_64 checking target... LINUX.3.11.0-12-generic.x86_64/windrvr6_usb.ko checking for regparm kernel option... find: `/usr/src/WinDriver/redist/.tmp_driver/.tmp_versions': No such file or directory 0 checking for modpost location... /usr/src/linux/scripts/mod/modpost configure.usb: creating ./config.status config.status: creating makefile.usb.kbuild checking for cpu architecture... x86_64 checking for WinDriver root directory... /usr/src/WinDriver checking for linux kernel source... found at /usr/src/linux checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -s /usr/lib /usr/lib64; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so checking which directories to include... -I/usr/src/linux/include checking linux kernel version... 3.11.10.6 checking for modules installation directory... /lib/modules/3.11.0-12-generic/kernel/drivers/misc checking output directory... LINUX.3.11.0-12-generic.x86_64 checking target... LINUX.3.11.0-12-generic.x86_64/windrvr6.ko checking for regparm kernel option... find: `/usr/src/WinDriver/redist/.tmp_driver/.tmp_versions': No such file or directory 0 checking for right linked object... windrvr_gcc_v3.a checking for modpost location... /usr/src/linux/scripts/mod/modpost configure.wd: creating ./config.status config.status: creating makefile.wd.kbuild What is the problem?

    Read the article

  • problems mounting an external IDE drive via USB in ubuntu

    - by Roy Rico
    I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

    Read the article

  • problems mounting an external IDE drive via USB in ubuntu

    - by Roy Rico
    I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

    Read the article

  • NSCalendar: Problem getting weeks in a month...

    - by AngrySpade
    I am creating a calendar control of sorts... One thing I need to know is how many weeks are there in a Month... So NSCalendar rangeOfUnit:inUnit:forDate Seems to be exactly what I need... Except I am noticing something that seems off and I can't quite figure out why this is happening... The following code... NSCalendar *calendar = [NSCalendar currentCalendar]; NSDateComponents *dateComponents = [[NSDateComponents alloc] init]; [dateComponents setYear: 2010]; [dateComponents setDay: 1]; for (int x=1; x<=12; x++) { [dateComponents setMonth: x]; NSDate *date = [calendar dateFromComponents:dateComponents]; NSLog(@"Date: %@", date); NSRange range = [calendar rangeOfUnit: NSWeekCalendarUnit inUnit: NSMonthCalendarUnit forDate:date]; NSLog(@"%d Weeks in Month %d", range.length, [dateComponents month]); } Is returning the following debug messages... 2010-03-14 13:08:10.350 Scrap[4256:207] Date: 2010-01-01 00:00:00 -0500 2010-03-14 13:08:10.351 Scrap[4256:207] 5 Weeks in Month 1 2010-03-14 13:08:10.352 Scrap[4256:207] Date: 2010-02-01 00:00:00 -0500 2010-03-14 13:08:10.352 Scrap[4256:207] 4 Weeks in Month 2 2010-03-14 13:08:10.353 Scrap[4256:207] Date: 2010-03-01 00:00:00 -0500 2010-03-14 13:08:10.353 Scrap[4256:207] 5 Weeks in Month 3 2010-03-14 13:08:10.354 Scrap[4256:207] Date: 2010-04-01 00:00:00 -0400 2010-03-14 13:08:10.355 Scrap[4256:207] 5 Weeks in Month 4 2010-03-14 13:08:10.356 Scrap[4256:207] Date: 2010-05-01 00:00:00 -0400 2010-03-14 13:08:10.357 Scrap[4256:207] 5 Weeks in Month 5 2010-03-14 13:08:10.358 Scrap[4256:207] Date: 2010-06-01 00:00:00 -0400 2010-03-14 13:08:10.358 Scrap[4256:207] 5 Weeks in Month 6 2010-03-14 13:08:10.359 Scrap[4256:207] Date: 2010-07-01 00:00:00 -0400 2010-03-14 13:08:10.360 Scrap[4256:207] 5 Weeks in Month 7 2010-03-14 13:08:10.361 Scrap[4256:207] Date: 2010-08-01 00:00:00 -0400 2010-03-14 13:08:10.364 Scrap[4256:207] 5 Weeks in Month 8 2010-03-14 13:08:10.364 Scrap[4256:207] Date: 2010-09-01 00:00:00 -0400 2010-03-14 13:08:10.365 Scrap[4256:207] 5 Weeks in Month 9 2010-03-14 13:08:10.366 Scrap[4256:207] Date: 2010-10-01 00:00:00 -0400 2010-03-14 13:08:10.366 Scrap[4256:207] 5 Weeks in Month 10 2010-03-14 13:08:10.367 Scrap[4256:207] Date: 2010-11-01 00:00:00 -0400 2010-03-14 13:08:10.367 Scrap[4256:207] 5 Weeks in Month 11 2010-03-14 13:08:10.369 Scrap[4256:207] Date: 2010-12-01 00:00:00 -0500 2010-03-14 13:08:10.369 Scrap[4256:207] 52 Weeks in Month 12 I cant quite figure out why I get 52 weeks in month 12. Any clues?

    Read the article

  • Linux ls[] command

    - by pedro
    ubuntu@ubuntu:/$ ls /dev/tty[15-24]* /dev/tty1 /dev/tty13 /dev/tty17 /dev/tty40 /dev/tty44 /dev/tty48 /dev/tty10 /dev/tty14 /dev/tty18 /dev/tty41 /dev/tty45 /dev/tty49 /dev/tty11 /dev/tty15 /dev/tty19 /dev/tty42 /dev/tty46 what is wrong?

    Read the article

  • Android Facebook SDK : post message without showing facebook page

    - by someone_ smiley
    I am trying to integrate Facebook to my Android app for social post. I have downloaded latest Facebook sdk from here and apply all setup require to post to facebook. Now i can post to facebook. But problem is that, when i run sample program from facebook sdk, a browser like page is open and user have to enter message himself there. but i dont want this page to showed up. i want a fixed message to post directly without opening facebook dialog box. But if there is noway to avoid this, please tell me how can i fixed certain part of message so that user can't modified it. Thanks in Advance Edit: this is message i got after using this project 04-10 11:44:34.691: I/dalvikvm(719): Failed resolving Lnet/xeomax/TestRocket/TestRocket; interface 22 'Lnet/xeomax/FBRocket/LoginListener;' 04-10 11:44:34.691: W/dalvikvm(719): Link of class 'Lnet/xeomax/TestRocket/TestRocket;' failed 04-10 11:44:34.691: D/AndroidRuntime(719): Shutting down VM 04-10 11:44:34.701: W/dalvikvm(719): threadid=1: thread exiting with uncaught exception (group=0x40015560) 04-10 11:44:34.781: E/AndroidRuntime(719): FATAL EXCEPTION: main 04-10 11:44:34.781: E/AndroidRuntime(719): java.lang.RuntimeException: Unable to instantiate activity ComponentInfo{net.xeomax.TestRocket/net.xeomax.TestRocket.TestRocket}: java.lang.ClassNotFoundException: net.xeomax.TestRocket.TestRocket in loader dalvik.system.PathClassLoader[/data/app/net.xeomax.TestRocket-1.apk] 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1569) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1663) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread.access$1500(ActivityThread.java:117) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:931) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.os.Handler.dispatchMessage(Handler.java:99) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.os.Looper.loop(Looper.java:130) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread.main(ActivityThread.java:3683) 04-10 11:44:34.781: E/AndroidRuntime(719): at java.lang.reflect.Method.invokeNative(Native Method) 04-10 11:44:34.781: E/AndroidRuntime(719): at java.lang.reflect.Method.invoke(Method.java:507) 04-10 11:44:34.781: E/AndroidRuntime(719): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 04-10 11:44:34.781: E/AndroidRuntime(719): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 04-10 11:44:34.781: E/AndroidRuntime(719): at dalvik.system.NativeStart.main(Native Method) 04-10 11:44:34.781: E/AndroidRuntime(719): Caused by: java.lang.ClassNotFoundException: net.xeomax.TestRocket.TestRocket in loader dalvik.system.PathClassLoader[/data/app/net.xeomax.TestRocket-1.apk] 04-10 11:44:34.781: E/AndroidRuntime(719): at dalvik.system.PathClassLoader.findClass(PathClassLoader.java:240) 04-10 11:44:34.781: E/AndroidRuntime(719): at java.lang.ClassLoader.loadClass(ClassLoader.java:551) 04-10 11:44:34.781: E/AndroidRuntime(719): at java.lang.ClassLoader.loadClass(ClassLoader.java:511) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.Instrumentation.newActivity(Instrumentation.java:1021) 04-10 11:44:34.781: E/AndroidRuntime(719): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1561) 04-10 11:44:34.781: E/AndroidRuntime(719): ... 11 more

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >