Search Results

Search found 3898 results on 156 pages for 'unknown'.

Page 150/156 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Remote Desktop Services Gateway Issue

  - by AVandelay05

  Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

  Read the article

• Calculus? Need help solving for a time-dependent variable given some other variables.

  - by user451527

  Long story short, I'm making a platform game. I'm not old enough to have taken Calculus yet, so I know not of derivatives or integrals, but I know of them. The desired behavior is for my character to automagically jump when there is a block to either side of him that is above the one he's standing on; for instance, stairs. This way the player can just hold left / right to climb stairs, instead of having to spam the jump key too. The issue is with the way I've implemented jumping; I've decided to go mario-style, and allow the player to hold 'jump' longer to jump higher. To do so, I have a 'jump' variable which is added to the player's Y velocity. The jump variable increases to a set value when the 'jump' key is pressed, and decreases very quickly once the 'jump' key is released, but decreases less quickly so long as you hold the 'jump' key down, thus providing continuous acceleration up as long as you hold 'jump.' This also makes for a nice, flowing jump, rather than a visually jarring, abrupt acceleration. So, in order to account for variable stair height, I want to be able to calculate exactly what value the 'jump' variable should get in order to jump exactly to the height of the stair; preferably no more, no less, though slightly more is permissible. This way the character can jump up steep or shallow flights of stairs without it looking weird or being slow. There are essentially 5 variables in play: h -the height the character needs to jump to reach the stair top<br> j -the jump acceleration variable<br> v -the vertical velocity of the character<br> p -the vertical position of the character<br> d -initial vertical position of the player minus final position<br> Each timestep:<br> j -= 1.5; //the jump variable's deceleration<br> v -= j; //the jump value's influence on vertical speed<br> v *= 0.95; //friction on the vertical speed<br> v += 1; //gravity<br> p += v; //add the vertical speed to the vertical position<br> v-initial is known to be zero<br> v-final is known to be zero<br> p-initial is known<br> p-final is known<br> d is known to be p-initial minus p-final<br> j-final is known to be zero<br> j-initial is unknown<br> Given all of these facts, how can I make an equation that will solve for j? tl;dr How do I Calculus? Much thanks to anyone who's made it this far and decides to plow through this problem.

  Read the article

• Bad disks in ancient server

  - by Joel Coel

  I have a 1998-era Netware 3.12 server that runs everything on our campus: general ledger, purchasing, payroll, student information, grades, you name it. The server has an Adaptec RAID controller with two volumes: RAID 1, 2 17GB scsi disks, Seagate ST318417W RAID 5, 3 4GB scsi disks, 2 Seagate ST34573W and 1 ST34572W. We are currently in the early stages of a project to replace this system, but you don't just jump into a new system like that and so I need to keep this server running until at least November 2011. This week we had not one but two hard drives fail. Thankfully they are from different volumes and we're able to keep running for the moment, but given the close nature of these failures I have serious doubts that I'll be able to avoid catastrophic failure from this server through the November target as is without restoring the RAID redundancy — it'll only take one more drive failure anywhere and I'm completely hosed. We are fortunate enough to have exact match "spares" lying around for both drives, but the spares are in unknown condition. I tried swapping just them in, but the RAID controller isn't smart enough to handle this and it renders the system unbootable. As for the RAID controller itself, there is utility I can get into during POST via a Ctrl-A shortcut, but I can't do much useful from there. To actually manage volumes I must first boot in to Netware, at which point I can use CI/O Array Management Software Version 2.0 to actually look at volume information. I suspect that the normal way to manage things is to boot from a special floppy with the controller software on it, but that floppy is long gone. Going through the options in the RAID software, I think the only supported way to replace a disk in an existing RAID volume is to physically add the disk, boot up and configure it as a "spare" for a volume, force the volume to use the spare to replace an existing down disk (and at this point I'm only guessing) so that the down disk becomes the spare, repair the volume, remove the spare from the volume, and then shut down and remove the disk. Then start all over for the other failed disk. All this amounts to a lot of downtime, assuming I can even make it work and that my spares are any good. As for finding reliable spares, I have no clue where to even begin looking to find a new 4GB scsi drive, or even which exact scsi system I'm looking for, as it's gone through a few different iterations over time. Another option is to migrate this to a virtual machine (hyper-v), but all previous attempts we've made in this area have failed to get very far. When this machine was installed I was just graduating from high school, and so it requires lower level knowledge of netware and dos than I ever developed, or if I did have since forgotten (I'm not exactly a dos neophyte, either). Part of my problem is this is a high-use server, and taking it down for a few days to figure things out isn't gonna fly very well. As for the question, I'm looking for anything that might be helpful in this situation: a recommendation on a place to find good spares from this era, personal experience repairing RAID volumes using a similar controller or building a hyper-v vm from an old netware server, a line on a floppy with better software for the RAID controller, recommendation on a good Novell consultant in Nebraska that would be able to put things right, a whole other option I haven't considered yet, etc. Update: For backups, we have good (recently verified via restore) backups of the data only -- nothing for the software that actually runs things. Update 2: Just a progress report that I currently have a working Netware 3.12 install in VMWare Virtual Server 2.0, thanks largely to the guide I found here: http://cerbulescubogdan.blogspot.com/2010/11/novell-netware-312-on-vmware.html The next steps are preparing empty netware volumes to match the additional volumes on my existing server, taking a dump of everything on the C:\ drive and netware volumes on my existing server, and figuring out from that information what modules need added to netware, installing my licenses (we do still have that disk, if it's any good), and moving data over. I have approval to bring the server down for a week after the first of the year (sadly not before), so, aside from creating empty volumes, the rest of the work will have to wait until then. Final Update (Jan 5, 2011): I was able to get spares working in both raid arrays without data loss this week. Both are now listed by the controller as "FAULT TOLLERANT" (yay!). I was also able to build on the progress from my last update and now have a functional "spare" server in VMWare Server 2.0. The spare can run and use our erp software, but I can't put it into production because I can't (yet) print from that box (and I have no idea why). Even so, this VM will do in a pinch if I have no other choice, and between it and the repaired RAID arrays I'm comfortable pushing on until I can junk the machine in November.

  Read the article

• Problem on getting the vendor id and product id of a usb device

  - by new

  Hi... my application comes and prints this "\?\usb#vid_04f2&pid_0111#5&1ba5a77f&0&2#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}" again it goes to while loop .... here it gets breaked in the else statement... Qt Code: if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { // Change the buffer size. if (buffer) LocalFree(buffer); buffer = (LPTSTR)LocalAlloc(LPTR,buffersize); } else { qDebug ()<<"Here it quits the application"; // Insert error handling here. break; } Any ideas in this.... full source code comes here static GUID GUID_DEVINTERFACE_USB_DEVICE = { 0xA5DCBF10L, 0x6530, 0x11D2, { 0x90, 0x1F, 0x00, 0xC0, 0x4F, 0xB9, 0x51, 0xED } }; HANDLE hInfo = SetupDiGetClassDevs(&GUID_DEVINTERFACE_USB_DEVICE,NULL,NULL, DIGCF_PRESENT | DIGCF_INTERFACEDEVICE); if ( hInfo == INVALID_HANDLE_VALUE ) { qDebug ()<<"invalid"; } else { qDebug ()<<"valid handle"; SP_DEVINFO_DATA DeviceInfoData; DeviceInfoData.cbSize = sizeof(SP_DEVINFO_DATA); SP_INTERFACE_DEVICE_DATA Interface_Info; Interface_Info.cbSize = sizeof(Interface_Info); BYTE Buf[1024]; DWORD i; DWORD InterfaceNumber= 0; PSP_DEVICE_INTERFACE_DETAIL_DATA pspdidd = (PSP_DEVICE_INTERFACE_DETAIL_DATA) Buf; for (i=0;SetupDiEnumDeviceInfo(hInfo,i,&DeviceInfoData);i++) { DWORD DataT; LPTSTR buffer = NULL; DWORD buffersize = 0; while (!SetupDiGetDeviceRegistryProperty( hInfo, &DeviceInfoData,SPDRP_DEVICEDESC, &DataT,(PBYTE)buffer,buffersize, &buffersize)) { if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { // Change the buffer size. if (buffer) LocalFree(buffer); buffer = (LPTSTR)LocalAlloc(LPTR,buffersize); } else { // Insert error handling here. break; } qDebug ()<<(TEXT("Device Number %i is: %s\n"),i, buffer); if (buffer) LocalFree(buffer); if ( GetLastError() != NO_ERROR && GetLastError() != ERROR_NO_MORE_ITEMS ) { // Insert error handling here. qDebug ()<<"return false"; } InterfaceNumber = 0; // this just returns the first one, you can iterate on this if (SetupDiEnumDeviceInterfaces(hInfo, NULL, &GUID_DEVINTERFACE_USB_DEVICE, InterfaceNumber, &Interface_Info)) { printf("Got interface"); DWORD needed; pspdidd->cbSize = sizeof(*pspdidd); SP_DEVICE_INTERFACE_DETAIL_DATA *pDetData = NULL; DWORD dwDetDataSize = sizeof (SP_DEVICE_INTERFACE_DETAIL_DATA) + 256; pDetData = (SP_DEVICE_INTERFACE_DETAIL_DATA*) malloc (dwDetDataSize); pDetData->cbSize = sizeof (SP_DEVICE_INTERFACE_DETAIL_DATA); SetupDiGetDeviceInterfaceDetail(hInfo,&Interface_Info, pDetData,dwDetDataSize, NULL,&DeviceInfoData); qDebug ()<<pDetData->DevicePath; qDebug ()<<QString::fromWCharArray(pDetData->DevicePath); free(pDetData); } else { printf("\nNo interface"); //ErrorExit((LPTSTR) "SetupDiEnumDeviceInterfaces"); if ( GetLastError() == ERROR_NO_MORE_ITEMS) printf(", since there are no more items found."); else printf(", unknown reason."); } // Cleanup SetupDiDestroyDeviceInfoList(hInfo); } } }

  Read the article

• Play! Framework 1.2.4 --- C3P0 settings to avoid Communications link failure do to idle time

  - by HelpMeStackOverflowMyOnlyHope

  I'm trying to customize my C3P0 settings to avoid the error shown at the bottom of this post. It was suggested at this url --- http://make-it-open.blogspot.com/2008/12/sql-error-0-sqlstate-08s01.html --- to adjust the settings as follows: In hibernate.cfg.xml, write <property name="c3p0.min_size">5</property> <property name="c3p0.max_size">20</property> <property name="c3p0.timeout">1800</property> <property name="c3p0.max_statements">50</property> Then create "c3p0.properties" in your root classpath folder and write c3p0.testConnectionOnCheckout=true c3p0.acquireRetryDelay=1000 c3p0.acquireRetryAttempts=1 I've tried to make those adjustments following the direction of the Play! Framework documentation, where they say use "db.pool..." as follows: db.pool.timeout=1800 db.pool.maxSize=15 db.pool.minSize=5 db.pool.initialSize=5 db.pool.acquireRetryAttempts=1 db.pool.preferredTestQuery=SELECT 1 db.pool.testConnectionOnCheckout=true db.pool.acquireRetryDelay=1000 db.pool.maxStatements=50 Are those settings not going to work? Should I be trying to set them in a different way? With those settings I still get the error shown below, that is due to to long of a idle time. Complete Stack Trace of Error: 23:00:44,932 WARN ~ SQL Error: 0, SQLState: 08S01 2012-04-13T23:00:44+00:00 app[web.1]: 23:00:44,932 ERROR ~ Communications link failure 2012-04-13T23:00:44+00:00 app[web.1]: 2012-04-13T23:00:44+00:00 app[web.1]: The last packet successfully received from the server was 274,847 milliseconds ago. The last packet sent successfully to the server was 7 milliseconds ago. 2012-04-13T23:00:44+00:00 app[web.1]: 23:00:44,934 ERROR ~ Why the driver complains here? 2012-04-13T23:00:44+00:00 app[web.1]: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: No operations allowed after connection closed.Connection was implicitly closed by the driver. 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.Util.handleNewInstance(Util.java:407) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.Util.getInstance(Util.java:382) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1013) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:987) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:982) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:927) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.throwConnectionClosedException(ConnectionImpl.java:1213) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.getMutex(ConnectionImpl.java:3101) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.setAutoCommit(ConnectionImpl.java:4975) 2012-04-13T23:00:44+00:00 app[web.1]: at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:74) 2012-04-13T23:00:44+00:00 app[web.1]: at $Proxy49.setAutoCommit(Unknown Source) 2012-04-13T23:00:44+00:00 app[web.1]: at play.db.jpa.JPAPlugin.closeTx(JPAPlugin.java:368) 2012-04-13T23:00:44+00:00 app[web.1]: at play.db.jpa.JPAPlugin.onInvocationException(JPAPlugin.java:328) 2012-04-13T23:00:44+00:00 app[web.1]: at play.plugins.PluginCollection.onInvocationException(PluginCollection.java:447) 2012-04-13T23:00:44+00:00 app[web.1]: at play.Invoker$Invocation.onException(Invoker.java:240) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job.onException(Job.java:124) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job.call(Job.java:163) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job$1.call(Job.java:66) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.FutureTask.run(FutureTask.java:166) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) 2012-04-13T23:00:44+00:00 app[web.1]: at java.lang.Thread.run(Thread.java:636) 2012-04-13T23:00:44+00:00 app[web.1]: Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure

  Read the article

• In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

  - by user955664

  I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

  Read the article

• How to define an n-m relation in doctrine?

  - by murze

  If got a table "Article" and a table "Tags". Articles can have multiple tags and tags can hang to multiple articles. The class BaseArticle looks like this: abstract class BaseArticle extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('article'); $this->hasColumn('article_id', 'integer', 8, array( 'type' => 'integer', 'length' => 8, 'fixed' => false, 'unsigned' => false, 'primary' => true, 'autoincrement' => true, )); $this->hasColumn('title', 'string', null, array( 'type' => 'string', 'fixed' => false, 'unsigned' => false, 'primary' => false, 'notnull' => false, 'autoincrement' => false, )); $this->hasColumn('text', 'string', null, array( 'type' => 'string', 'fixed' => false, 'unsigned' => false, 'primary' => false, 'notnull' => false, 'autoincrement' => false, $this->hasColumn('url', 'string', 255, array( 'type' => 'string', 'length' => 255, 'fixed' => false, 'unsigned' => false, 'primary' => false, 'notnull' => false, 'autoincrement' => false, )); } public function setUp() { parent::setUp(); $this->hasMany('Tag as Tags', array( 'local' => 'article_id', 'foreign'=>'tag_id', 'refClass'=>'Articletag') ); } } The BaseTag-class like this: abstract class BaseTag extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('tag'); $this->hasColumn('tag_id', 'integer', 4, array( 'type' => 'integer', 'length' => 4, 'fixed' => false, 'unsigned' => false, 'primary' => true, 'autoincrement' => true, )); $this->hasColumn('name', 'string', null, array( 'type' => 'string', 'fixed' => false, 'unsigned' => false, 'primary' => false, 'notnull' => false, 'autoincrement' => false, )); } public function setUp() { parent::setUp(); $this->hasMany('Article as Articles', array( 'local' => 'tag_id', 'foreign'=>'article_id', 'refClass'=>'Articletag') ); } } And the relationship class like this: abstract class BaseArticletag extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('articletag'); $this->hasColumn('article_id', 'integer', 8, array( 'type' => 'integer', 'length' => 8, 'fixed' => false, 'unsigned' => false, 'primary' => true, 'autoincrement' => false, )); $this->hasColumn('tag_id', 'integer', 4, array( 'type' => 'integer', 'length' => 4, 'fixed' => false, 'unsigned' => false, 'primary' => true, 'autoincrement' => false, )); } public function setUp() { parent::setUp(); } } When I try to get a property from the article all goes well by using: $article = Doctrine_Query::create()->from('Article a') ->where('id = ?' , 1) ->fetchOne(); echo $article->title; //gives me the title But when I try this: foreach($article->Tags as $tag) { echo($tag->name) } I get an error: Unknown record property / related component "Tags" on "Article"

  Read the article

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• File Upload drops with no reason

  - by sufoid

  Hallo I want to make an file upload. The script should take the image, resize it and upload it. But it seems that there is any unknown to me error in the upload. Here the code define ("MAX_SIZE","2000"); // maximum size for uploaded images define ("WIDTH","107"); // width of thumbnail define ("HEIGHT","107"); // alternative height of thumbnail (portrait 107x80) define ("WIDTH2","600"); // width of (compressed) photo define ("HEIGHT2","600"); // alternative height of (compressed) photo (portrait 600x450) if (isset($_POST['Submit'])) { // iterate thorugh all upload fields foreach ($_FILES as $key => $value) { //read name of user-file $image = $_FILES[$key]['name']; // if it is not empty if ($image) { $filename = stripslashes($_FILES[$key]['name']); // get original name of file from clients machine $extension = getExtension($filename); // get extension of file in lower case format $extension = strtolower($extension); // if extension not known, output error // otherwise continue if (($extension != "jpg") && ($extension != "jpeg") && ($extension != "png") && ($extension != "gif")) { echo '<div class="failure">Fehler bei Datei '. $_FILES[$key]['name'] .': Unbekannter Dateityp: Es können nur Dateien vom Typ .gif, .jpg oder .png hochgeladen werden.</div>'; } else { // get size of image in bytes // $_FILES[\'image\'][\'tmp_name\'] >> temporary filename of file in which the uploaded file was stored on server $size = getimagesize($_FILES[$key]['tmp_name']); $sizekb = filesize($_FILES[$key]['tmp_name']); // if image size exceeds defined maximum size, output error // otherwise continue if ($sizekb > MAX_SIZE*1024) { echo '<div class="failure">Fehler bei Datei '. $_FILES[$key]['name'] .': Die Datei konnte nicht hochgeladen werden: die Dateigröße überschreitet das Limit von 2MB.</div>'; } else { $rand = md5(rand() * time()); // create random file name $image_name = $rand.'.'.$extension; // unique name (random number) // new name contains full path of storage location (images folder) $consname = "photos/".$image_name; // path to big image $consname2 = "photos/thumbs/".$image_name; // path to thumbnail $copied = copy($_FILES[$key]['tmp_name'], $consname); $copied = copy($_FILES[$key]['tmp_name'], $consname2); $sql="INSERT INTO photos (galery_id, photo, thumb) VALUES (". $id .", '$consname', '$consname2')" or die(mysql_error()); $query = mysql_query($sql) or die(mysql_error()); // if image hasnt been uploaded successfully, output error // otherwise continue if (!$copied) { echo '<div class="failure">Fehler bei Datei '. $_FILES[$key]['name'] .': Die Datei konnte nicht hochgeladen werden.</div>'; } else { $thumb_name = $consname2; // path for thumbnail for creation & storage // call to function: create thumbnail // parameters: image name, thumbnail name, specified width and height $thumb = make_thumb($consname,$thumb_name,WIDTH,HEIGHT); $thumb = make_thumb($consname,$consname,WIDTH2,HEIGHT2); } } } } } // current image could be uploaded successfully echo '<div class="success">'. $success .' Foto(s) erfolgreich hochgeladen!</div>'; showForm(); // call to function: create upload form }

  Read the article

• Building an external list while filtering in LINQ

  - by Khnle

  I have an array of input strings that contains either email addresses or account names in the form of domain\account. I would like to build a List of string that contains only email addresses. If an element in the input array is of the form domain\account, I will perform a lookup in the dictionary. If the key is found in the dictionary, that value is the email address. If not found, that won't get added to the result list. The code below will makes the above description clear: private bool where(string input, Dictionary<string, string> dict) { if (input.Contains("@")) { return true; } else { try { string value = dict[input]; return true; } catch (KeyNotFoundException) { return false; } } } private string select(string input, Dictionary<string, string> dict) { if (input.Contains("@")) { return input; } else { try { string value = dict[input]; return value; } catch (KeyNotFoundException) { return null; } } } public void run() { Dictionary<string, string> dict = new Dictionary<string, string>() { { "gmail\\nameless", "[email protected]"} }; string[] s = { "[email protected]", "gmail\\nameless", "gmail\\unknown" }; var q = s.Where(p => where(p, dict)).Select(p => select(p, dict)); List<string> resultList = q.ToList<string>(); } While the above code works (hope I don't have any typo here), there are 2 problems that I do not like with the above: The code in where() and select() seems to be redundant/repeating. It takes 2 passes. The second pass converts from the query expression to List. So I would like to add to the List resultList directly in the where() method. It seems like I should be able to do so. Here's the code: private bool where(string input, Dictionary<string, string> dict, List<string> resultList) { if (input.Contains("@")) { resultList.Add(input); //note the difference from above return true; } else { try { string value = dict[input]; resultList.Add(value); //note the difference from above return true; } catch (KeyNotFoundException) { return false; } } } The my LINQ expression can be nicely in 1 single statement: List<string> resultList = new List<string>(); s.Where(p => where(p, dict, resultList)); Or var q = s.Where(p => where(p, dict, resultList)); //do nothing with q afterward Which seems like perfect and legal C# LINQ. The result: sometime it works and sometime it doesn't. So why doesn't my code work reliably and how can I make it do so?

  Read the article

• How can I tell the size of my app during development?

  - by Newbyman

  My programming decissions are directly related to how much room I have left, or worse perhaps how much I need to shave off in order to get up the 10mb limit. I have read that Apple has quietly increased the 3G & Edge download limit from 10mb up to 20mb in preparation for the iPad in April. Either way, my real question is how can I gauge a rough estimate of how large my app will end while I'm still in the development phase? Is the file size of my development folder roughly 1 to 1 ratio? Is the compressed file size of my development a better approximation? My .xcodeproj file is only a couple hundred kB, but the size of my folder is 11.8 MB. I have a .sqlite database, less than 20 small png images and a Settings.Bundle. The rest are unknown Xcode files related to build, build for iphoneOS, simulator etc.... My source code is rather large with around 1000 lines in most of the major controllers, all in all around 48 .h&.m files. But my classes folder inside my development folder is less than 800kb. Digging around inside my Build file, there is lots of iphone simulator files and debugging files which I don't think will contribute to the final product. The Application file states that it is around 2.3 MB. However, this is such a large difference from the 11.8 MB, I have to wonder if this is just another piece of the equation. I have the app on the my device, I'm in the testing phase. Therefore, I though that I would try to see how large the working version was on the device by checking in iTunes, however my development app is visible on the right-hand the application's iphone screen, but no information about the app most importantly its size. I also checked in Organizer, I used the lower portion of the screen-(Applications), found my application and selected the drop down arrow which gave my "Application Data" and a download arrow button to the right to save a file on my desktop, named with the unique AppleID. Inside the folder it had three folders-(documents, library, tmp) the documents had a copy of my .sqlite database, the library a few more files but not anything obvious or of size, and the tmp was empty. All in all the entire folder was only 164kb-which tells me that this is not the right place to find the size either. I understand that the size is considered to be the size of my binary plus all the additional files and images that I have add. Does anyone have a effective way of guaging how large the binary is or the relating the development folder size to what the final App Store application size will end up. I know that questions have been posted with similar aspects, but I could not find any answered post that really described...what files, or how to determine size specifically. I know that this question looks like a book, but I just wanted to be specific in conveying exactly what I'm looking for and the attempts thus far. *Note all files are unzipped and still in regular working Xcode order of a single app with no brought-in builds or referenced projects. I'm sure that this is straight forward, I just don't know where to look?

  Read the article

• Windows 7 cannot join samba domain

  - by Antonis Christofides

  I have a 3.5.6 samba server with a LDAP backend (both on Debian 6.0). I've been successfully adding Windows XP machines to the domain for years. I now try to add Windows 7. I have made the recommended registry changes, but I don't have any success so far. Here is what happens: 1. I go to computer name, select "Domain" instead of "Workgroup", type in the domain name, click OK. It asks me for the username and password of an account that can add computers to the domain; I enter them. After about 40 seconds, I get the following message: The following error occurred attempting to join the domain "ITIA": The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain. Despite this, the samba server successfully creates the computer account. 2. Therefore, if I try again a second time, without deleting the already created computer account, I get a different error: The following error occurred attempting to join the domain "ITIA": The specified account already exists. (Note that until a while ago samba wasn't configured to automatically create computer accounts. What I did whenever I wanted an XP to join was to manually create it. When I first attempted to solve the Windows 7 join problem, I setup samba to do this automatically, as this is what most people do, as I understand, and I thought that it might be related. I haven't attempted to add an XP since I made this change, so I don't know if it works, but whether it works or not, the problem remains.) Update 1: Here are the relevant parts of smb.conf: [global] panic action = /usr/share/samba/panic-action %d workgroup = ITIA server string = Itia file server announce as = NT interfaces = 147.102.160.1 volume = %h passdb backend = ldapsam:ldap://ldap.itia.ntua.gr:389 ldap admin dn = uid=samba,ou=daemons,dc=itia,dc=ntua,dc=gr ldap ssl = off ldap suffix = dc=itia,dc=ntua,dc=gr ldap user suffix = ou=people ldap group suffix = ou=groups ldap machine suffix = ou=computers unix password sync = no add machine script = smbldap-useradd -w -i %u log file = /var/log/samba/samba-log.all log level = 3 max log size = 5000 syslog = 2 socket options = SO_KEEPALIVE TCP_NODELAY encrypt passwords = true password level = 1 security = user domain master = yes local master = no wins support = yes domain logons = yes idmap gid = 1000-2000 Update 2: The server has a single network interface eth1 (also an unused eth0 that shows up only in the kernel boot messages) and two ip addresses; the main, 147.102.160.1, and an additional one, 147.102.160.37, that comes up with "ip addr add 147.102.160.37/32 dev eth1" (used only for a web site that has a different certificate than other web sites served from the same machine). One of the problems I recently faced was that samba was using the latter IP address. I fixed that by adding the "interfaces = 147.102.160.1" statement in smb.conf. Now: acheloos:/etc/apache2# tcpdump host 147.102.160.40 and not port 5900 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:13:56.549048 IP lithaios.itia.civil.ntua.gr.netbios-dgm > 147.102.160.255.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549056 ARP, Request who-has acheloos2.itia.civil.ntua.gr tell lithaios.itia.civil.ntua.gr, length 46 13:13:56.549091 ARP, Reply acheloos2.itia.civil.ntua.gr is-at 00:10:4b:b4:9e:59 (oui Unknown), length 28 13:13:56.549324 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549608 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos2.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549741 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550364 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550468 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) (acheloos2 is the second IP address, 147.102.160.37). The above dump occurs when I click "OK" (to join the domain), until it asks me for the username and password of a user that can join the domain. I don't know why the client is contacting the second IP address. I tried temporarily deactivating it, but I still had some related ARP traffic (though I think not IP traffic).

  Read the article

• on Google App Engine 500 Error, it should be 200 instead of 500

  - by Faisal Amjad

  requestToken = function() { var getTokenURI = '/gettoken?userid=' + userid; var httpRequest = makeRequest(getTokenURI, true); httpRequest.onreadystatechange = function() { if (httpRequest.readyState == 4) { if (httpRequest.status == 200) { openChannel(httpRequest.responseText); } else { alert('ERROR: AJAX request status = ' + httpRequest.status); } } } }; function makeRequest(url, async) { var httpRequest; if (window.XMLHttpRequest) { httpRequest = new XMLHttpRequest(); } else if (window.ActiveXObject) { // IE try { httpRequest = new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { try { httpRequest = new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) { } } } if (!httpRequest) { return false; } httpRequest.open('POST', url, async); httpRequest.send(); return httpRequest; } it is running excellent on localhost...but on google app engine it httpRequest.status equals 500 and goes in else statement. WHY? LOG on google app engine: /getFriendList?userid=d 500 253ms 0kb Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11 175.110.179.86 - - [17/Dec/2012:08:35:33 -0800] "POST /getFriendList?userid=d HTTP/1.1" 500 0 "http://faisalimmsngr.appspot.com/" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11" "faisalimmsngr.appspot.com" ms=254 cpu_ms=110 instance=00c61b117caf2d11ca57d2a2296ccd0b902b038a W 2012-12-17 08:35:33.272 Failed startup of context com.google.apphosting.utils.jetty.RuntimeAppEngineWebAppContext@10ff62a{/,/base/data/home/apps/s~faisalimmsngr/1.363934467542140431} org.mortbay.util.MultiException[java.lang.UnsupportedClassVersionError: adv/web/mid/exam/FriendServlet : Unsupported major.minor version 51.0, java.lang.UnsupportedClassVersionError: adv/web/mid/exam/MessageServlet : Unsupported major.minor version 51.0, java.lang.UnsupportedClassVersionError: adv/web/mid/exam/TokenServlet : Unsupported major.minor version 51.0] at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:656) at org.mortbay.jetty.servlet.Context.startContext(Context.java:140) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:219) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:194) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:134) at com.google.apphosting.runtime.JavaRuntime$RequestRunnable.run(JavaRuntime.java:447) at com.google.tracing.TraceContext$TraceContextRunnable.runInContext(TraceContext.java:454) at com.google.tracing.TraceContext$TraceContextRunnable$1.run(TraceContext.java:461) at com.google.tracing.TraceContext.runInContext(TraceContext.java:703) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContextNoUnref(TraceContext.java:338) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContext(TraceContext.java:330) at com.google.tracing.TraceContext$TraceContextRunnable.run(TraceContext.java:458) at com.google.apphosting.runtime.ThreadGroupPool$PoolEntry.run(ThreadGroupPool.java:251) at java.lang.Thread.run(Thread.java:679) java.lang.UnsupportedClassVersionError: adv/web/mid/exam/FriendServlet : Unsupported major.minor version 51.0 at com.google.appengine.runtime.Request.process-c04431eac3a1f275(Request.java) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:634) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142) at java.net.URLClassLoader.defineClass(URLClassLoader.java:277) at sun.reflect.GeneratedMethodAccessor5.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) at org.mortbay.util.Loader.loadClass(Loader.java:91) at org.mortbay.util.Loader.loadClass(Loader.java:71) at org.mortbay.jetty.servlet.Holder.doStart(Holder.java:73) at org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:242) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:685) at org.mortbay.jetty.servlet.Context.startContext(Context.java:140) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.tracing.TraceContext$TraceContextRunnable.runInContext(TraceContext.java:454) at com.google.tracing.TraceContext$TraceContextRunnable$1.run(TraceContext.java:461) at com.google.tracing.TraceContext.runInContext(TraceContext.java:703) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContextNoUnref(TraceContext.java:338) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContext(TraceContext.java:330) at com.google.tracing.TraceContext$TraceContextRunnable.run(TraceContext.java:458) at java.lang.Thread.run(Thread.java:679)

  Read the article

• com.sun.org.apache.xerces.internal.dom.DocumentImpl cannot be cast to org.codehaus.plexus.util.xml.X

  - by Random

  Afetr using the Model library (see this) for my Maven pom.xml during this weeks I jumped on this error while attempting to write a ConfiguratonContainer into the pom.xml. The javadoc for Model says: public void setConfiguration(Object configuration) Set the configuration as DOM object. Parameters: configuration - So I made some xml with Document (org.w3c.dom.Document) and the xml parser standar javax library. You know the code (it's through all the net) but I paste it here... DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder parser = factory.newDocumentBuilder(); Document doc =parser.newDocument(); And then you fill the code with Element declaration,a lot of appendChild and such. And tried to make it work. Doesn't seem to do well. First tried using plugin.setConfiguration(doc); But it didn't work. Then I tried Obejct obj = doc; plugin.setConfiguration(obj); But it didn't work. Then I searched the net for answers, and guess... It didn't work. There are like 0 people using this library (maven.model) in all the net. So here am I again, asking the senseis for help. Where is my error? I have downloaded the source code of the library trying to see where is the error, but it seems to be ok (as should). I add the stackrace for reference java.lang.ClassCastException: com.sun.org.apache.xerces.internal.dom.DocumentImpl cannot be cast to org.codehaus.plexus.util.xml.Xpp3Dom at org.apache.maven.model.io.xpp3.MavenXpp3Writer.writePlugin(MavenXpp3Writer.java:1472) at org.apache.maven.model.io.xpp3.MavenXpp3Writer.writeBuild(MavenXpp3Writer.java:326) at org.apache.maven.model.io.xpp3.MavenXpp3Writer.writeModel(MavenXpp3Writer.java:1093) at org.apache.maven.model.io.xpp3.MavenXpp3Writer.write(MavenXpp3Writer.java:102) at com.mapfre.mutua.PDA.model.GeneratePOM.createPOM(GeneratePOM.java:28) at com.mapfre.mutua.PDA.prueba.MavenPOM.generatePOMWAR(MavenPOM.java:681) at com.mapfre.mutua.PDA.prueba.GenerarPOMMapfreAction.execute(GenerarPOMMapfreAction.java:36) at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58) at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67) at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51) at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191) at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305) at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191) at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462) at javax.servlet.http.HttpServlet.service(HttpServlet.java:647) at javax.servlet.http.HttpServlet.service(HttpServlet.java:729) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:873) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689) at java.lang.Thread.run(Unknown Source)

  Read the article

• Geolocation through Android's GPS Provider on a website?

  - by Corey Ogburn

  I'm trying to get the geolocation of the mobile device in a regular website, not a webview of an application or anything native like that. I'm getting a location, but it's highly inaccurate, the accuracy comes back as 3230 or some other outrageous number. I'm assuming that's in meters, either way it's not nearly accurate enough. By comparison, the same webpage on a laptop gets an accuracy of 30-40. My first thought was that it was using the Network Provider instead of the GPS Provider, telling me where I am based on tower location and reach. A little research later I found enableHighAccuracy and set it true in the options that I pass. After including that, I still notice no difference. Here's the test page's HTML/javascript: <html> <head> <script type="text/javascript" src="http://ecn.dev.virtualearth.net/mapcontrol/mapcontrol.ashx?v=7.0"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.3/jquery.min.js"></script> <script type="text/javascript"> function OnLoad() { $("#Status").text("Init"); if (navigator.geolocation) { $("#Status").text("Supports Geolocation"); navigator.geolocation.getCurrentPosition(HandleLocation, LocationError, { enableHighAccuracy: true }); $("#Status").text("Sent position request..."); } else { $("#Status").text("Doesn't support geolocation"); } } function HandleLocation(position) { $("#Status").text("Received response:"); $("#Position").text("(" + position.coords.latitude + ", " + position.coords.longitude + ") accuracy: " + position.coords.accuracy); var loc = new Microsoft.Maps.Location(position.coords.latitude, position.coords.longitude); GetMap(loc); } function LocationError(error) { switch(error.code) { case error.PERMISSION_DENIED: alert("Location not provided"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unknown error"); break; } } function GetMap(loc) { var map = new Microsoft.Maps.Map(document.getElementById("mapDiv"), {credentials: "Aj59meaCR1e7rNgkfQy7j08Pd3mzfP1r04hGesGmLe2a3ZwZ3iGecwPX2SNPWq5a", center: loc, mapTypeId: Microsoft.Maps.MapTypeId.road, zoom: 15}); } </script> </head> <body onload="javascript:OnLoad()"> <div id="Status"></div> <div id="Position"></div><br/> <div id='mapDiv' style="position:relative; width:600px; height:400px;"></div> </body> </html> I'm testing this on a rooted MyTouch 3G running Cyanogen 6.1 stable, Android 2.2 and GPS is enabled. In case rooting was a problem, I have also had various friends and coworkers try the webpage on their non-rooted 2.0+ Android devices. Each phone had various effects on the accuracy, but none were better than 1000, I attribute this to the different carriers. I have not (but eventually will) tested with iPhone or other location-aware cell phones.

  Read the article

• Supporting Piping (A Useful Hello World)

  - by blastthisinferno

  I am trying to write a collection of simple C++ programs that follow the basic Unix philosophy by: Make each program do one thing well. Expect the output of every program to become the input to another, as yet unknown, program. I'm having an issue trying to get the output of one to be the input of the other, and getting the output of one be the input of a separate instance of itself. Very briefly, I have a program add which takes arguments and spits out the summation. I want to be able to pipe the output to another add instance. ./add 1 2 | ./add 3 4 That should yield 6 but currently yields 10. I've encountered two problems: The cin waits for user input from the console. I don't want this, and haven't been able to find a simple example showing a the use of standard input stream without querying the user in the console. If someone knows of an example please let me know. I can't figure out how to use standard input while supporting piping. Currently, it appears it does not work. If I issue the command ./add 1 2 | ./add 3 4 it results in 7. The relevant code is below: add.cpp snippet // ... COMMAND LINE PROCESSING ... std::vector<double> numbers = multi.getValue(); // using TCLAP for command line parsing if (numbers.size() > 0) { double sum = numbers[0]; double arg; for (int i=1; i < numbers.size(); i++) { arg = numbers[i]; sum += arg; } std::cout << sum << std::endl; } else { double input; // right now this is test code while I try and get standard input streaming working as expected while (std::cin) { std::cin >> input; std::cout << input << std::endl; } } // ... MORE IRRELEVANT CODE ... So, I guess my question(s) is does anyone see what is incorrect with this code in order to support piping standard input? Are there some well known (or hidden) resources that explain clearly how to implement an example application supporting the basic Unix philosophy? @Chris Lutz I've changed the code to what's below. The problem where cin still waits for user input on the console, and doesn't just take from the standard input passed from the pipe. Am I missing something trivial for handling this? I haven't tried Greg Hewgill's answer yet, but don't see how that would help since the issue is still with cin. // ... COMMAND LINE PROCESSING ... std::vector<double> numbers = multi.getValue(); // using TCLAP for command line parsing double sum = numbers[0]; double arg; for (int i=1; i < numbers.size(); i++) { arg = numbers[i]; sum += arg; } // right now this is test code while I try and get standard input streaming working as expected while (std::cin) { std::cin >> arg; std::cout << arg << std::endl; } std::cout << sum << std::endl; // ... MORE IRRELEVANT CODE ...

  Read the article

• I added some options to stop spam with Postfix, but now won't send email to remote domains

  - by willdanceforfun

  I had a working Postfix server, but added a few lines to my main.cf in a hope to block some common spam. Those lines I added were: smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit It appears my postfix is now receiving normal emails fine, and blocking spam emails. But when I now try to use this server myself to send to a remote domain (an email not on my server) I get bounced, with maillog saying something like this: Nov 12 06:19:36 srv postfix/smtpd[11756]: NOQUEUE: reject: RCPT from unknown[xx.xx.x.xxx]: 450 4.1.2 <[email protected]>: Recipient address rejected: Domain not found; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<[192.168.1.100]> Is that saying 'domain not found' for gmail.com? Why is that recipient address rejected? An output of my postconf-n is: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = primarydomain.net myhostname = mail.primarydomain.net myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = $mydestination, primarydomain.net, secondarydomain.org sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_client_restrictions = permit_sasl_authenticated smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_domains = mail.secondarydomain.org virtual_alias_maps = hash:/etc/postfix/virtual Any insight greatly appreciated. Edit: here is the dig mx gmail.com from the server: ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> mx gmail.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 31766 ;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 4, ADDITIONAL: 14 ;; QUESTION SECTION: ;gmail.com. IN MX ;; ANSWER SECTION: gmail.com. 1207 IN MX 5 gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 30 alt3.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 20 alt2.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 40 alt4.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 10 alt1.gmail-smtp-in.l.google.com. ;; AUTHORITY SECTION: gmail.com. 109168 IN NS ns1.google.com. gmail.com. 109168 IN NS ns4.google.com. gmail.com. 109168 IN NS ns3.google.com. gmail.com. 109168 IN NS ns2.google.com. ;; ADDITIONAL SECTION: alt1.gmail-smtp-in.l.google.com. 207 IN A 173.194.70.27 alt1.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4001:c02::1b gmail-smtp-in.l.google.com. 200 IN A 173.194.67.26 gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:400c:c05::1b alt3.gmail-smtp-in.l.google.com. 207 IN A 74.125.143.27 alt3.gmail-smtp-in.l.google.com. 249 IN AAAA 2a00:1450:400c:c05::1b alt2.gmail-smtp-in.l.google.com. 207 IN A 173.194.69.27 alt2.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4008:c01::1b alt4.gmail-smtp-in.l.google.com. 207 IN A 173.194.79.27 alt4.gmail-smtp-in.l.google.com. 249 IN AAAA 2607:f8b0:400e:c01::1a ns2.google.com. 281970 IN A 216.239.34.10 ns3.google.com. 281970 IN A 216.239.36.10 ns4.google.com. 281970 IN A 216.239.38.10 ns1.google.com. 281970 IN A 216.239.32.10

  Read the article

• T_INLINE_HTML? What's wrong with this?

  - by Charlie Pigarelli

  <? switch($data['type']) : ?> <? case 'log': ?> <? while ($row = $data['loop']->fetch()) : ?> <table class="t-errors"> <tr> <td> <b>IP:</b> <? echo $row['LogShellIP']; ?> <b>Command:</b> <? echo $row['LogShellCommand']; ?> <b>Executed:</b> <? echo $row['LogShellReturn']; ?> <b>Time:</b> <? echo format::time($row['LogShellTime']); ?> </td> </tr> </table> <? endwhile; ?> <? break; ?> <? case 'fatal': ?> <? case 'warning': ?> <? case 'notice': ?> <? case 'unknown': ?> <? while ($row = $data['loop']->fetch()) : ?> <table class="t-errors"> <tr> <td <? if ($row['LogErrorSeen'] == 0) { echo 'class="e-selected"'; } ?>> <b>String:</b> <? echo $row['LogErrorString']; ?> <b>File:</b> <? echo $row['LogErrorFile']; ?> <b>Line:</b> <? echo $row['LogErrorLine']; ?> <b>Context:</b> <? echo $row['LogErrorContext']; ?> <b>Ip:</b> <? echo $row['LogErrorIP']; ?> <b>Time:</b> <? echo format::time($row['LogErrorTime']); ?> </td> </tr> </table> <? endwhile; ?> <? break; ?> <? endswitch; ? I'm getting this error: Parse error: syntax error, unexpected T_INLINE_HTML, expecting T_ENDSWITCH or T_CASE or T_DEFAULT in /Applications/XAMPP/xamppfiles/htdocs/Smooth Framework/tpl/terminal.tpl.php on line 33 Where line 33 is the line 2 of this script. This is inserted in a template context. What's wrong with this? He is expecting a T_CASE and that's what is there!

  Read the article

• Node.js, Cygwin and Socket.io walk into a bar... Node.js throws ENOBUFS and everyone dies...

  - by A Wizard Did It

  I'm hoping someone here can help me out, I'm not having much luck figuring this out myself. I'm running node.js version 0.3.1 on Cygwin. I'm using Connect and Socket.io. I seem to be having some random problems with DNS or something, I haven't quite figured it out. The end result is that I the server is running fine, but when a browser attempts to connect to it the initial HTTP Request works, Socket.io connects, and then the server dies (output below). I don't think it has anything to do with the HTTP request because the server gets a lot data posted to it, and it was receiving requests and responding up until my connection that killed it. I've googled around and the closest thing I've found is DNS being set improperly. It's a network program meant to run only on an internal network, so I've set the nameserver x.x.x.x in my /etc/resolv.conf to the internal DNS. I've also added nameserver 8.8.8.8 in addition. I'm not sure what else to check, but would be grateful of any help. In node.exe.stackdump Exception: STATUS_ACCESS_VIOLATION at eip=610C51B9 eax=00000000 ebx=00000001 ecx=00000000 edx=00000308 esi=00000000 edi=010FCCB0 ebp=010FCAEC esp=010FCAC4 program=\\?\E:\cygwin\usr\local\bin\node.exe, pid 3296, thread unknown (0xBEC) cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B Stack trace: Frame Function Args 010FCAEC 610C51B9 (00000000, 00000000, 00000000, 00000000) 010FCBFC 610C5B55 (00000000, 00000000, 00000000, 00000000) 010FCCBC 610C693A (FFFFFFFF, FFFFFFFF, 750334F3, FFFFFFFE) 010FCD0C 61027CB2 (00000002, F4B994D5, 010FCE64, 00000002) 010FCD98 76306B59 (00000002, 010FCDD4, 763069A4, 00000002) End of stack trace Node Output: node.js:50 throw e; // process.nextTick error, or 'error' event on first tick ^ Error: ENOBUFS, No buffer space available at doConnect (net.js:642:19) at net.js:803:9 at dns.js:166:30 at IOWatcher.callback (dns.js:48:15) EDIT I'm hitting an LDAP server using http.createClient immediately after a client connects to get information, and that seems to be where the problem is that is causing ENOBUFS. I've edited the source to include && errno != ENOBUFS which now prevents the server from dying, however now the LDAP request isn't working. I'm not sure what the problem is that would cause that though. As I mentioned this is an internal only application, so I set the DNS servers in /etc/resolv.conf to the DNS servers that are being applied to the host machine. Not sure if this is part of the issue? EDIT 2 Here's some output from gdb --args ./node_g --debug ../myscript.js. I'm not sure if this is related to ENOBUFS, however, as it seems to be disconnecting immediately after connection with Socket.io [New thread 672.0x100] Error: dll starting at 0x76e30000 not found. Error: dll starting at 0x76250000 not found. Error: dll starting at 0x76e30000 not found. Error: dll starting at 0x76f50000 not found. [New thread 672.0xc90] [New thread 672.0x448] debugger listening on port 5858 [New thread 672.0xbf4] 14 Jan 18:48:57 - socket.io ready - accepting connections [New thread 672.0xed4] [New thread 672.0xd68] [New thread 672.0x1244] [New thread 672.0xf14] 14 Jan 18:49:02 - Initializing client with transport "websocket" assertion "b[1] == 0" failed: file "../src/node.cc", line 933, function: ssize_t node::DecodeWrite(char*, size_t, v8::Handle<v8::Value>, node::encoding) Program received signal SIGABRT, Aborted. 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll (gdb) backtrace #0 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll #1 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll #2 0x75030816 in WaitForSingleObjectEx () from /cygdrive/c/Windows/syswow64/KernelBase.dll #3 0x0000035c in ?? () #4 0x00000000 in ?? () (gdb)

  Read the article

• Listening for TCP and UDP requests on the same port

  - by user339328

  I am writing a Client/Server set of programs Depending on the operation requested by the client, I use make TCP or UDP request. Implementing the client side is straight-forward, since I can easily open connection with any protocol and send the request to the server-side. On the servers-side, on the other hand, I would like to listen both for UDP and TCP connections on the same port. Moreover, I like the the server to open new thread for each connection request. I have adopted the approach explained in: link text I have extended this code sample by creating new threads for each TCP/UDP request. This works correctly if I use TCP only, but it fails when I attempt to make UDP bindings. Please give me any suggestion how can I correct this. tnx Here is the Server Code: public class Server { public static void main(String args[]) { try { int port = 4444; if (args.length > 0) port = Integer.parseInt(args[0]); SocketAddress localport = new InetSocketAddress(port); // Create and bind a tcp channel to listen for connections on. ServerSocketChannel tcpserver = ServerSocketChannel.open(); tcpserver.socket().bind(localport); // Also create and bind a DatagramChannel to listen on. DatagramChannel udpserver = DatagramChannel.open(); udpserver.socket().bind(localport); // Specify non-blocking mode for both channels, since our // Selector object will be doing the blocking for us. tcpserver.configureBlocking(false); udpserver.configureBlocking(false); // The Selector object is what allows us to block while waiting // for activity on either of the two channels. Selector selector = Selector.open(); tcpserver.register(selector, SelectionKey.OP_ACCEPT); udpserver.register(selector, SelectionKey.OP_READ); System.out.println("Server Sterted on port: " + port + "!"); //Load Map Utils.LoadMap("mapa"); System.out.println("Server map ... LOADED!"); // Now loop forever, processing client connections while(true) { try { selector.select(); Set<SelectionKey> keys = selector.selectedKeys(); // Iterate through the Set of keys. for (Iterator<SelectionKey> i = keys.iterator(); i.hasNext();) { SelectionKey key = i.next(); i.remove(); Channel c = key.channel(); if (key.isAcceptable() && c == tcpserver) { new TCPThread(tcpserver.accept().socket()).start(); } else if (key.isReadable() && c == udpserver) { new UDPThread(udpserver.socket()).start(); } } } catch (Exception e) { e.printStackTrace(); } } } catch (Exception e) { e.printStackTrace(); System.err.println(e); System.exit(1); } } } The UDPThread code: public class UDPThread extends Thread { private DatagramSocket socket = null; public UDPThread(DatagramSocket socket) { super("UDPThread"); this.socket = socket; } @Override public void run() { byte[] buffer = new byte[2048]; try { DatagramPacket packet = new DatagramPacket(buffer, buffer.length); socket.receive(packet); String inputLine = new String(buffer); String outputLine = Utils.processCommand(inputLine.trim()); DatagramPacket reply = new DatagramPacket(outputLine.getBytes(), outputLine.getBytes().length, packet.getAddress(), packet.getPort()); socket.send(reply); } catch (IOException e) { e.printStackTrace(); } socket.close(); } } I receive: Exception in thread "UDPThread" java.nio.channels.IllegalBlockingModeException at sun.nio.ch.DatagramSocketAdaptor.receive(Unknown Source) at server.UDPThread.run(UDPThread.java:25) 10x

  Read the article

• Ubuntu cannot access internet, LAN is fine

  - by Kevin Southworth

  I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• jQuery $.ajax response empty, but only in Chrome

  - by roguepixel

  I've exhausted every avenue of research to solve this one so hopefully someone else will think of something I just didn't. Relatively straight forward setup, I have a html page with some javascript that makes an ajax request to a URL (in the same domain) the java web app in the background does its stuff and returns a partial html page (no html, head or body tags, just the content) which should be inserted at a particular point in the page. All sounds pretty easy and the code I have works in IE, Firefox and Safari, but not in Chrome. In Chrome the target element just ends up empty and if I look at the resource request in Chromes developer tools the response content is also empty. All very confusing, I've tried a myriad of things to solve it and I'm just out of ideas. Any help would be greatly appreciated. var container = $('#container'); $.ajax({ type: 'GET', url: '/path/to/local/url', data: data('parameters=value&another=value2'), dataType: 'html', cache: false, beforeSend: requestBefore, complete: requestComplete, success: requestSuccess, error: requestError }); function data(parameters) { var dictionary = {}; var pairs = parameters.split('&'); for (var i = 0; i < pairs.length; i++) { var keyValuePair = pairs[i].split('='); dictionary[keyValuePair[0]] = keyValuePair[1]; } return dictionary; } function requestBefore() { container.find('.message.error').hide(); container.prepend('<div class="modal"><div class="indicator">Loading...</div></div>'); } function requestComplete() { container.find('.modal').remove(); } function requestSuccess(response) { container.empty(); container.html(response); } function requestError(response) { if (response.status == 200 && response.responseText == 'OK') { requestSuccess(response); } else { container.find('.message.error').fadeIn('slow'); } } All of this is executed in a $(document).ready(function() {}); Cheers, Jim @Oleg - Additional information requested, an example of the response that the ajax call might receive. <p class="message error hidden">An unknown error occured while trying to retrieve data, please try again shortly.</p> <div class="timeline"> <a class="icon shuttle-previous" rel="max_id=16470650733&page=1&q=something">Newer Data</a> <a class="icon shuttle-next" rel="max_id=16470650733&page=3&q=something">Older Data</a> </div> <ol class="social"> <li class="even"> <div class="avatar"> <img src="sphere_normal.gif"/> </div> <p> Some Content<br/> <span class="published">Jun 18, 2010 11:29:05 AM</span> - <a target="_blank" href="">Direct Link</a> </p> </li> <li class="odd"> <div class="avatar"> <img src="sphere_normal.gif"/> </div> <p> Some Content<br/> <span class="published">Jun 18, 2010 11:29:05 AM</span> - <a target="_blank" href="">Direct Link</a> </p> </li> </ol> <div class="timeline"> <a class="icon shuttle-previous" rel="max_id=16470650733&page=1&q=something">Newer Data</a> <a class="icon shuttle-next" rel="max_id=16470650733&page=3&q=something">Older Data</a> </div>

  Read the article

• Singleton method not getting called in Cocos2d

  - by jini

  I am calling a Singleton method that does not get called when I try doing this. I get no errors or anything, just that I am unable to see the CCLOG message. Under what reasons would a compiler not give you error and not allow you to call a method? [[GameManager sharedGameManager] openSiteWithLinkType:kLinkTypeDeveloperSite]; The method is defined as follows: -(void)openSiteWithLinkType:(LinkTypes)linkTypeToOpen { CCLOG(@"WE ARE IN openSiteWithLinkType"); //I NEVER SEE THIS MESSAGE NSURL *urlToOpen = nil; if (linkTypeToOpen == kLinkTypeDeveloperSite) { urlToOpen = [NSURL URLWithString:@"http://somesite.com"]; } if (![[UIApplication sharedApplication]openURL:urlToOpen]) { CCLOG(@"%@%@",@"Failed to open url:",[urlToOpen description]); [self runSceneWithID:kMainMenuScene]; } } HERE IS THE CODE TO MY SINGLETON: #import "GameManager.h" #import "MainMenuScene.h" @implementation GameManager static GameManager* _sharedGameManager = nil; @synthesize isMusicON; @synthesize isSoundEffectsON; @synthesize hasPlayerDied; +(GameManager*) sharedGameManager { @synchronized([GameManager class]) { if (!_sharedGameManager) { [[self alloc] init]; return _sharedGameManager; } return nil; } } +(id)alloc { @synchronized ([GameManager class]) { NSAssert(_sharedGameManager == nil,@"Attempted to allocate a second instance of the Game Manager singleton"); _sharedGameManager = [super alloc]; return _sharedGameManager; } return nil; } -(id)init { self = [super init]; if (self != nil) { //Game Manager initialized CCLOG(@"Game Manager Singleton, init"); isMusicON = YES; isSoundEffectsON = YES; hasPlayerDied = NO; currentScene = kNoSceneUninitialized; } return self; } -(void) runSceneWithID:(SceneTypes)sceneID { SceneTypes oldScene = currentScene; currentScene = sceneID; id sceneToRun = nil; switch (sceneID) { case kMainMenuScene: sceneToRun = [MainMenuScene node]; break; default: CCLOG(@"Unknown Scene ID, cannot switch scenes"); return; break; } if (sceneToRun == nil) { //Revert back, since no new scene was found currentScene = oldScene; return; } //Menu Scenes have a value of < 100 if (sceneID < 100) { if (UI_USER_INTERFACE_IDIOM() != UIUserInterfaceIdiomPad) { CGSize screenSize = [CCDirector sharedDirector].winSizeInPixels; if (screenSize.width == 960.0f) { //iPhone 4 retina [sceneToRun setScaleX:0.9375f]; [sceneToRun setScaleY:0.8333f]; CCLOG(@"GM: Scaling for iPhone 4 (retina)"); } else { [sceneToRun setScaleX:0.4688f]; [sceneToRun setScaleY:0.4166f]; CCLOG(@"GM: Scaling for iPhone 3G or older (non-retina)"); } } } if ([[CCDirector sharedDirector] runningScene] == nil) { [[CCDirector sharedDirector] runWithScene:sceneToRun]; } else { [[CCDirector sharedDirector] replaceScene:sceneToRun]; } } -(void)openSiteWithLinkType:(LinkTypes)linkTypeToOpen { CCLOG(@"WE ARE IN openSiteWithLinkType"); NSURL *urlToOpen = nil; if (linkTypeToOpen == kLinkTypeDeveloperSite) { urlToOpen = [NSURL URLWithString:@"http://somesite.com"]; } if (![[UIApplication sharedApplication]openURL:urlToOpen]) { CCLOG(@"%@%@",@"Failed to open url:",[urlToOpen description]); [self runSceneWithID:kMainMenuScene]; } } -(void) test { CCLOG(@"this is test"); } @end

  Read the article

• PHP - Code Sample - Polymorphism Implementation - How to allow for expansion?

  - by darga33

  I've read numerous SO posts about Polymorphism, and also the other really good one at http://net.tutsplus.com/tutorials/php/understanding-and-applying-polymorphism-in-php/ Good stuff!!! I'm trying to figure out how a seasoned PHP developer that follows all the best practices would accomplish the following. Please be as specific and detailed as possible. I'm sure your answer is going to help a lot of people!!! :-) While learning Polymorphism, I came across a little stumbling block. Inside of the PDFFormatter class, I had to use (instanceof) in order to figure out if some code should be included in the returned data. I am trying to be able to pass in two different kinds of profiles to the formatter. (needs to be able to handle multiple kinds of formatters but display the data specific to the Profile class that is being passed to it). It doesn't look bad now, but imagine 10 more kinds of Profiles!! How would you do this? The best answer would also include the changes you would make. Thanks sooooooo much in advance!!!!! Please PHP only! Thx!!! File 1. FormatterInterface.php interface FormatterInterface { public function format(Profile $Profile); } File 2. PDFFormatter.php class PDFFormatter implements FormatterInterface { public function format(Profile $Profile) { $format = "PDF Format<br /><br />"; $format .= "This is a profile formatted as a PDF.<br />"; $format .= 'Name: ' . $Profile->name . '<br />'; if ($Profile instanceof StudentProfile) { $format .= "Graduation Date: " . $Profile->graduationDate . "<br />"; } $format .= "<br />End of PDF file"; return $format; } } File 3. Profile.php class Profile { public $name; public function __construct($name) { $this->name = $name; } public function format(FormatterInterface $Formatter) { return $Formatter->format($this); } } File 4. StudentProfile.php class StudentProfile extends Profile { public $graduationDate; public function __construct($name, $graduationDate) { $this->name = $name; $this->graduationDate = $graduationDate; } } File 5. index.php //Assuming all files are included...... $StudentProfile = new StudentProfile('Michael Conner', 55, 'Unknown, FL', 'Graduate', '1975', 'Business Management'); $Profile = new Profile('Brandy Smith', 44, 'Houston, TX'); $PDFFormatter = new PDFFormatter(); echo '<hr />'; echo $StudentProfile->format($PDFFormatter); echo '<hr />'; echo $Profile->format($PDFFormatter);

  Read the article

• Effective optimization strategies on modern C++ compilers

  - by user168715

  I'm working on scientific code that is very performance-critical. An initial version of the code has been written and tested, and now, with profiler in hand, it's time to start shaving cycles from the hot spots. It's well-known that some optimizations, e.g. loop unrolling, are handled these days much more effectively by the compiler than by a programmer meddling by hand. Which techniques are still worthwhile? Obviously, I'll run everything I try through a profiler, but if there's conventional wisdom as to what tends to work and what doesn't, it would save me significant time. I know that optimization is very compiler- and architecture- dependent. I'm using Intel's C++ compiler targeting the Core 2 Duo, but I'm also interested in what works well for gcc, or for "any modern compiler." Here are some concrete ideas I'm considering: Is there any benefit to replacing STL containers/algorithms with hand-rolled ones? In particular, my program includes a very large priority queue (currently a std::priority_queue) whose manipulation is taking a lot of total time. Is this something worth looking into, or is the STL implementation already likely the fastest possible? Along similar lines, for std::vectors whose needed sizes are unknown but have a reasonably small upper bound, is it profitable to replace them with statically-allocated arrays? I've found that dynamic memory allocation is often a severe bottleneck, and that eliminating it can lead to significant speedups. As a consequence I'm interesting in the performance tradeoffs of returning large temporary data structures by value vs. returning by pointer vs. passing the result in by reference. Is there a way to reliably determine whether or not the compiler will use RVO for a given method (assuming the caller doesn't need to modify the result, of course)? How cache-aware do compilers tend to be? For example, is it worth looking into reordering nested loops? Given the scientific nature of the program, floating-point numbers are used everywhere. A significant bottleneck in my code used to be conversions from floating point to integers: the compiler would emit code to save the current rounding mode, change it, perform the conversion, then restore the old rounding mode --- even though nothing in the program ever changed the rounding mode! Disabling this behavior significantly sped up my code. Are there any similar floating-point-related gotchas I should be aware of? One consequence of C++ being compiled and linked separately is that the compiler is unable to do what would seem to be very simple optimizations, such as move method calls like strlen() out of the termination conditions of loop. Are there any optimization like this one that I should look out for because they can't be done by the compiler and must be done by hand? On the flip side, are there any techniques I should avoid because they are likely to interfere with the compiler's ability to automatically optimize code? Lastly, to nip certain kinds of answers in the bud: I understand that optimization has a cost in terms of complexity, reliability, and maintainability. For this particular application, increased performance is worth these costs. I understand that the best optimizations are often to improve the high-level algorithms, and this has already been done.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156  | Next Page >